Chapter 10 of 11 · 8 min read

Unit Test: d- and f-Block Elements

Time: 50 minutes. 45 questions. Marking: +4 for a correct answer, −1 for a wrong answer, 0 if left blank. Use the data conventions from "How to use this book".

1. The spin-only magnetic moment of an ion with the configuration [Ar] 3d⁴ is (a) 3.87 BM (b) 2.83 BM (c) 5.92 BM (d) 4.90 BM

2. Which pair of ions are both colourless in aqueous solution? (a) V³⁺ and Zn²⁺ (b) Ti⁴⁺ and Cu⁺ (c) Mn²⁺ and Sc³⁺ (d) Fe³⁺ and Cu⁺

3. How many moles of Fe²⁺ are oxidised by 0.5 mol of K₂Cr₂O₇ in acid solution? (a) 1.5 (b) 3 (c) 6 (d) 2.5

4. Which ground-state 3d atom has the largest number of unpaired electrons? (a) Mn (b) Fe (c) V (d) Cr

5. A solution of a copper(I) salt in water changes into (a) Cu₂O only (b) Cu³⁺ and Cu (c) Cu²⁺ and Cu (d) Cu²⁺ and H₂

6. Which metal has the highest melting point? (a) Fe (b) Cr (c) Zn (d) W

7. In neutral or faintly alkaline solution, KMnO₄ oxidises iodide ions to (a) IO₃⁻ (b) I₂ (c) IO₄⁻ (d) IO⁻

8. Which of the following is not a consequence of the lanthanoid contraction? (a) Zr and Hf have nearly equal radii (b) Basicity increases from La(OH)₃ to Lu(OH)₃ (c) Lanthanoids are difficult to separate (d) 5d metals are much denser than 4d metals

9. Which 3d metal has a positive standard electrode potential E°(M²⁺/M)? (a) Cu (b) Ni (c) Co (d) Fe

10. The catalyst used for the hydrogenation of vegetable oils is (a) Fe (b) V₂O₅ (c) Ni (d) Pt–Rh gauze

11. When KMnO₄ is heated at 513 K, the manganese-containing products have Mn in the oxidation states (a) +7 and +2 (b) +6 and +2 (c) +6 and +4 (d) +4 and +3

12. Which oxide is the most basic? (a) Mn₂O₇ (b) CrO₃ (c) V₂O₅ (d) MnO

13. Which description fits interstitial compounds such as TiC and Fe₃H? (a) Soft, low melting and ionic (b) Reactive and non-conducting (c) Stoichiometric coloured salts (d) Hard, high melting, conducting and chemically inert

14. Compared with 4f orbitals in lanthanoids, the 5f orbitals in actinoids (a) are more buried and take less part in bonding (b) are less buried and take more part in bonding (c) are equally buried (d) do not hold any electrons

15. The equivalent mass of KMnO₄ (M = 158) in strongly alkaline medium is (a) 31.6 (b) 158 (c) 52.7 (d) 79

16. Which aqua ion has the same number of unpaired electrons as Cr³⁺? (a) Co²⁺ (b) Fe²⁺ (c) Ni²⁺ (d) Mn²⁺

17. How many oxygen atoms are shared between the two chromium atoms in the dichromate ion? (a) 1 (b) 2 (c) 3 (d) 0

18. Zn, Cd and Hg are not regarded as transition elements because (a) they are all liquids (b) they show many oxidation states (c) they have a full d¹⁰ set in the atom and in the common ion (d) they have no s electrons

19. Which element has the lowest third ionisation enthalpy? (a) Fe (b) Mn (c) Co (d) Ni

20. Acidified K₂Cr₂O₇ reacts with SO₂ to give (a) CrO₄²⁻ and S (b) Cr and SO₃ (c) Cr³⁺ and SO₄²⁻ (d) Cr₂O₃ and H₂S

21. The volume of 0.1 M KMnO₄ needed to oxidise 50 mL of 0.1 M FeSO₄ in acid is (a) 10 mL (b) 25 mL (c) 5 mL (d) 50 mL

22. Which lanthanoid has a 4f⁷ configuration in its +3 ion? (a) Gd (b) Eu (c) Tb (d) Sm

23. CrO₃ is (a) basic (b) acidic (c) amphoteric (d) neutral

24. Which metal has the highest density? (a) Sc (b) Ti (c) Zn (d) Cu

25. When MnO₂ is fused with KOH in the presence of air, the product is (a) KMnO₄ directly (b) Mn₂O₇ (c) MnCl₂ (d) K₂MnO₄

26. Which pair of ions both have a spin-only magnetic moment of about 5.92 BM? (a) Fe²⁺ and Co³⁺ (b) Cr³⁺ and V²⁺ (c) Mn²⁺ and Fe³⁺ (d) Ni²⁺ and Cu²⁺

27. Which actinoid can show the +7 oxidation state? (a) Np (b) Th (c) U (d) Am

28. Bronze is an alloy of (a) Cu and Zn (b) Fe and Ni (c) Ni and Cr (d) Cu and Sn

29. In acid solution, how many moles of sulphur are formed when 1 mol of Cr₂O₇²⁻ reacts with excess H₂S? (a) 3 (b) 6 (c) 1 (d) 2

30. Which element shows the largest number of oxidation states? (a) Sc (b) Ti (c) Mn (d) Zn

31. In the Fe³⁺-catalysed reaction between I⁻ and S₂O₈²⁻, which iron species is present again at the end? (a) Fe²⁺ (b) Fe³⁺ (c) Fe metal (d) FeSO₄ precipitate

32. The number of 4f electrons in Eu³⁺ (Z = 63) is (a) 7 (b) 5 (c) 6 (d) 8

33. In acid solution, the number of moles of KMnO₄ that react with 1 mol of oxalate ions is (a) 2.5 (b) 0.4 (c) 5 (d) 0.2

34. For Cr, IE₁ = 653 and IE₂ = 1592 kJ/mol. The energy to convert 1 mol Cr(g) into Cr²⁺(g) is (a) 2245 kJ (b) 1592 kJ (c) 5235 kJ (d) 939 kJ

35. Which statement about the chromate–dichromate system is correct? (a) Dichromate dominates in strongly alkaline solution (b) The interconversion is a redox reaction (c) The orange dichromate ion dominates in acid solution (d) Cr is +3 in chromate

36. Which ion is the strongest oxidising agent in aqueous solution? (a) Fe³⁺ (b) Cr³⁺ (c) Ti³⁺ (d) Mn³⁺

37. Compared with the lanthanoid contraction, the contraction from one actinoid to the next is (a) smaller (b) exactly equal (c) greater (d) absent

38. The mass of K₂Cr₂O₇ needed to liberate 0.3 mol of I₂ from excess acidified KI is (a) 14.7 g (b) 9.8 g (c) 58.8 g (d) 29.4 g

39. Which metal has the smallest metallic radius? (a) Sc (b) Fe (c) V (d) Zn

40. The oxidation state of uranium in the uranyl ion, UO₂²⁺, is (a) +4 (b) +6 (c) +5 (d) +2

41. The highest fluoride formed by manganese is (a) MnF₄ (b) MnF₇ (c) MnF₆ (d) MnF₂

42. The spin-only magnetic moment of [Ni(H₂O)₆]²⁺ is (a) 1.73 BM (b) 2.83 BM (c) 3.87 BM (d) 0

43. Assertion (A): Mn₂O₇ is an acidic oxide. Reason (R): In Mn₂O₇, manganese is in its highest oxidation state, which makes the Mn–O bonds largely covalent. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

44. Assertion (A): Copper does not displace hydrogen from dilute sulphuric acid. Reason (R): Copper has the outer configuration 3d¹⁰ 4s¹. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

45. Statement I: Ce⁴⁺, with a 4f⁰ configuration, acts as an oxidising agent. Statement II: Zirconium and hafnium are easily separated because their atomic radii differ greatly. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1dd⁴: n = 4, √24 ≈ 4.90.
2bTi⁴⁺ is d⁰; Cu⁺ is d¹⁰.
3b0.5 × 6 = 3 mol.
4dCr 3d⁵ 4s¹ has 6.
5c2Cu⁺ → Cu²⁺ + Cu.
6dTungsten melts near 3683 K.
7aNeutral medium takes I to +5.
8bBasicity falls from La(OH)₃ to Lu(OH)₃.
9aE°(Cu²⁺/Cu) = +0.34 V.
10cFinely divided Ni.
11cK₂MnO₄ (+6) and MnO₂ (+4).
12dLowest oxidation state gives most basic oxide.
13dSmall atoms in lattice gaps stiffen it.
14b5f extend further from the nucleus.
15bOnly 1 electron gained.
16aBoth have 3 unpaired electrons.
17aOne bridging O.
18cd¹⁰ in atom and M²⁺.
19aFe²⁺ (d⁶) → Fe³⁺ (d⁵) is favoured.
20cCr(VI) → Cr(III); S(IV) → S(VI).
21a5 × 10⁻³/5 = 10⁻³ mol ÷ 0.1 M = 10 mL.
22aGd³⁺: 64 − 57 = 7.
23bCr(VI) oxide gives chromic acid.
24dCu is about 9.0 g/cm³.
25d2MnO₂ + 4KOH + O₂ → 2K₂MnO₄ + 2H₂O.
26cBoth are d⁵.
27aNp and Pu reach +7.
28dBrass is Cu–Zn; bronze is Cu–Sn.
29a6 electrons / 2 per S = 3.
30cMn shows +2 to +7.
31bFe³⁺ is used and regenerated.
32c63 − 57 = 6.
33b2 MnO₄⁻ per 5 C₂O₄²⁻.
34a653 + 1592 = 2245 kJ.
35cH⁺ shifts equilibrium to Cr₂O₇²⁻.
36dE°(Mn³⁺/Mn²⁺) = +1.57 V is highest here.
37c5f shields even more poorly.
38d0.1 mol × 294 g/mol.
39bFe is about 126 pm.
40bx + 2(−2) = +2 gives x = +6.
41aF forms only single bonds.
42bd⁸: n = 2, √8.
43aHigh state makes oxide covalent and acidic.
44bTrue reason is positive E°, not the configuration itself.
45cZr and Hf have nearly equal radii and are hard to separate.
8 min left
‹
›