Chapter 4: Magnetic Properties, Colour, Catalysis, Complexes, Interstitial Compounds and Alloys
What you will learn
How unpaired d electrons make an ion paramagnetic, and how to use the spin-only formula μ = √(n(n+2)) BM.
Why most transition metal ions are coloured, and why d⁰ and d¹⁰ ions are colourless.
Why transition metals and their compounds are good catalysts, with the standard industrial examples.
Why transition metals form many complexes.
What interstitial compounds and alloys are, and their properties.
4.1 Magnetic behaviour: three kinds
Every electron spins and behaves like a tiny magnet. In a pair, the two spins point opposite ways and cancel. An unpaired electron leaves a net magnetic moment.
| Behaviour | Cause | In a magnetic field | Example |
|---|---|---|---|
| Diamagnetic | All electrons paired | Weakly repelled | Zn²⁺, Sc³⁺, Cu⁺ |
| Paramagnetic | One or more unpaired electrons | Attracted | Mn²⁺, Fe³⁺, Cu²⁺ |
| Ferromagnetic | Unpaired spins line up together over large regions (domains) | Very strongly attracted; can become a permanent magnet | Fe, Co, Ni metals |
Ferromagnetism is an extreme form of paramagnetism. It is why an iron nail sticks to a fridge magnet but a copper coin does not.
4.2 The spin-only formula
The magnetic moment of an ion has two parts: one from electron spin and one from orbital motion. In 3d ions, the surrounding ligands largely block the orbital part. So the spin part alone gives a good estimate.
The spin magnetic moment is given by:
Each unpaired electron adds 1/2 to the total spin S. With n unpaired electrons, S = n/2. Substitute:
BM is the Bohr magneton, the unit of magnetic moment for electrons. Learn these values:
| Unpaired electrons n | 0 | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|---|
| μ = √(n(n+2)) | 0 | √3 | √8 | √15 | √24 | √35 |
| μ (BM) | 0 | 1.73 | 2.83 | 3.87 | 4.90 | 5.92 |
Counting n for a 3d ion. Find the number of d electrons (group − charge). Fill five d orbitals one electron each first (Hund's rule), then pair up. In simple aqua ions, which are high-spin:
d¹ to d⁵: n equals the number of d electrons.
d⁶ to d¹⁰: n = 10 − (number of d electrons).
| Ion | d electrons | n | Spin-only μ (BM) |
|---|---|---|---|
| Sc³⁺, Ti⁴⁺ | d⁰ | 0 | 0 |
| Ti³⁺, V⁴⁺ | d¹ | 1 | 1.73 |
| V³⁺ | d² | 2 | 2.83 |
| V²⁺, Cr³⁺ | d³ | 3 | 3.87 |
| Cr²⁺, Mn³⁺ | d⁴ | 4 | 4.90 |
| Mn²⁺, Fe³⁺ | d⁵ | 5 | 5.92 |
| Fe²⁺ | d⁶ | 4 | 4.90 |
| Co²⁺ | d⁷ | 3 | 3.87 |
| Ni²⁺ | d⁸ | 2 | 2.83 |
| Cu²⁺ | d⁹ | 1 | 1.73 |
| Zn²⁺, Cu⁺ | d¹⁰ | 0 | 0 |

The bars climb to five unpaired electrons at d⁵ and fall back symmetrically, so d⁴ and d⁶ ions (Cr²⁺ and Fe²⁺) share the same 4.90 BM.
Measured values are close to these, a little higher for some ions (like Co²⁺) because of a small orbital contribution. In some complexes with strong ligands such as CN⁻, electrons pair up and n becomes smaller. That is covered in Book 12.
4.3 Colour
White light contains all visible colours. When light falls on a substance, some wavelengths may be absorbed. The colour we see is the complementary colour of the light absorbed. A Cu²⁺ solution absorbs in the red-orange region, so it looks blue.
Where the absorption comes from: d–d transitions. In a free ion, all five d orbitals have equal energy. When water molecules or other ligands surround the ion, the d orbitals split into groups of slightly different energy. The gap matches visible light. An electron in a lower d orbital absorbs a photon and jumps to a higher d orbital. This is a d–d transition.
For this to happen, the ion needs at least one d electron and at least one vacancy in the d set. So:
d⁰ ions (Sc³⁺, Ti⁴⁺) are colourless: no electron to jump.
d¹⁰ ions (Zn²⁺, Cu⁺, Cd²⁺) are colourless: no vacancy to jump into.
d¹ to d⁹ ions are usually coloured.
The exact colour depends on the ligand, because the ligand sets the size of the energy gap. [Ni(H₂O)₆]²⁺ is green, but adding ammonia gives blue-violet [Ni(NH₃)₆]²⁺.
| Aqua ion | d configuration | Colour |
|---|---|---|
| Sc³⁺ | d⁰ | Colourless |
| Ti³⁺ | d¹ | Purple |
| V⁴⁺ (as VO²⁺) | d¹ | Blue |
| V³⁺ | d² | Green |
| V²⁺ | d³ | Violet |
| Cr³⁺ | d³ | Violet |
| Mn³⁺ | d⁴ | Violet |
| Cr²⁺ | d⁴ | Blue |
| Mn²⁺ | d⁵ | Pale pink |
| Fe³⁺ | d⁵ | Yellow |
| Fe²⁺ | d⁶ | Green |
| Co²⁺ | d⁷ | Pink |
| Ni²⁺ | d⁸ | Green |
| Cu²⁺ | d⁹ | Blue |
| Zn²⁺ | d¹⁰ | Colourless |
Coloured d⁰ species: charge transfer. KMnO₄ is deep purple and K₂Cr₂O₇ is orange, but Mn(VII) and Cr(VI) are d⁰. Here an electron jumps from an oxygen atom to the metal. This is ligand-to-metal charge transfer (LMCT). It needs no d electrons and gives very intense colours.
4.4 Catalytic behaviour
Transition metals and their compounds speed up many reactions. A pressure cooker speeds up cooking by changing the conditions. A catalyst speeds up a reaction by giving it an easier path.
Two features make transition metals good catalysts.
Variable oxidation states. The metal ion can accept and give back electrons easily, switching between states. This creates an easy, low-energy route.
Surface and complex formation. The metal surface can adsorb reactant molecules using its d (and s) electrons. This holds the reactants close, weakens their bonds and raises their concentration at the surface.
| Catalyst | Process | Reaction |
|---|---|---|
| V₂O₅ | Contact process (H₂SO₄) | 2SO₂ + O₂ → 2SO₃ |
| Finely divided Fe (with Mo as promoter) | Haber process | N₂ + 3H₂ ⇌ 2NH₃ |
| Finely divided Ni | Hydrogenation of oils | Vegetable oil + H₂ → vanaspati ghee |
| TiCl₄ with Al(CH₃)₃ (Ziegler–Natta) | Polymerisation | Ethene → polythene |
| Pt (or Pt–Rh gauze) | Ostwald process | NH₃ oxidised to NO |
| MnO₂ | Lab preparation of O₂ | 2KClO₃ → 2KCl + 3O₂ |
How Fe³⁺ catalyses a reaction between two anions. Iodide and peroxodisulphate are both negative, so they repel and react slowly:
Fe³⁺ breaks this into two easy steps between oppositely charged ions:
Fe³⁺ is used and then regenerated. Adding the two steps gives back the overall equation. This is a direct use of variable oxidation states.
4.5 Complex formation
A complex is a central metal atom or ion bonded to surrounding molecules or ions called ligands, such as H₂O, NH₃, CN⁻ or Cl⁻. Transition metals form a huge number of complexes. Examples: [Fe(CN)₆]³⁻, [Fe(CN)₆]⁴⁻, [Cu(NH₃)₄]²⁺, [Ni(CN)₄]²⁻ and [PtCl₄]²⁻.
Three reasons:
Small size of the metal ions.
High ionic charge, so a strong pull on ligand lone pairs.
Vacant d orbitals of suitable energy to accept lone pairs from ligands.
When you add ammonia to blue copper sulphate solution, it turns deep blue. That is the complex [Cu(NH₃)₄]²⁺ forming. The full study of complexes, their naming, bonding and isomerism, is in Book 12 (Coordination Compounds).
4.6 Interstitial compounds
A metal crystal has small gaps, called interstices, between its atoms. Small atoms such as H, B, C and N can fit into these gaps. The resulting compounds are called interstitial compounds.
Examples: TiC, Mn₄N, Fe₃H, VH₀.₅₆ and TiH₁.₇.
Their formulas are often non-stoichiometric (like VH₀.₅₆), because the small atoms fill gaps at random. They are neither typical ionic nor typical covalent compounds.
Properties:
Higher melting points than the pure metals.
Very hard; some borides approach diamond in hardness.
Retain metallic conductivity.
Chemically inert.
Steel and cast iron are hard because carbon atoms sit in the interstices of the iron lattice.
4.7 Alloys
An alloy is a blend of metals made by mixing the molten components and cooling. Transition metals form alloys easily because their atomic radii are similar, usually within about 15 percent of each other. One metal atom can take the place of another in the lattice without much strain.
| Alloy | Main components | Typical use |
|---|---|---|
| Brass | Cu, Zn | Taps, utensils, fittings |
| Bronze | Cu, Sn | Statues, medals, bells |
| Stainless steel | Fe, Cr, Ni | Kitchen utensils, surgical tools |
| Nichrome | Ni, Cr | Heating coils in electric irons and heaters |
| German silver | Cu, Zn, Ni | Decorative items |
Alloys are usually harder than the parent metals and often have higher melting points. Stainless steel resists rust because chromium forms a thin protective oxide layer. Mercury alloys are called amalgams.
4.8 Worked examples
Worked example 4.1: Calculate the spin-only magnetic moment of Fe²⁺ (Z = 26).
Solution: Fe²⁺ is [Ar] 3d⁶. Fill five orbitals singly, then pair one: four unpaired electrons, so n = 4.
Worked example 4.2: Calculate the spin-only magnetic moment of Cu²⁺.
Solution: Cu²⁺ is 3d⁹, so n = 1. μ = √(1 × 3) = √3 ≈ 1.73 BM.
Worked example 4.3: An ion has a spin-only magnetic moment of 3.87 BM. Which of these is it: Ti³⁺, Cr³⁺, Mn²⁺, Ni²⁺?
Solution: Solve n(n + 2) = 3.87² ≈ 15. So n = 3. Ti³⁺ has 1, Cr³⁺ has 3 (d³), Mn²⁺ has 5, Ni²⁺ has 2. The ion is Cr³⁺.
Worked example 4.4: Which ion has the highest magnetic moment: V³⁺, Cr³⁺, Fe²⁺ or Mn²⁺?
Solution: Unpaired electrons: V³⁺ (d²) 2, Cr³⁺ (d³) 3, Fe²⁺ (d⁶) 4, Mn²⁺ (d⁵) 5. Mn²⁺ is highest at 5.92 BM.
Worked example 4.5: Sc³⁺ compounds are colourless, but Ti³⁺ compounds are purple. Explain.
Solution: Sc³⁺ is 3d⁰, so no d–d transition can occur. Ti³⁺ is 3d¹. Its single d electron absorbs visible light (green-yellow) and jumps to a higher d level. The transmitted light looks purple.
Worked example 4.6: Mn in KMnO₄ is d⁰, yet KMnO₄ is intensely purple. Why?
Solution: The colour is not from d–d transitions. An electron moves from an oxygen orbital to an empty Mn orbital when visible light is absorbed. This ligand-to-metal charge transfer is allowed and strong, so the colour is intense.
Worked example 4.7: Find the spin-only magnetic moments of manganese in K₂MnO₄ and in KMnO₄.
Solution: In K₂MnO₄, Mn is +6, so 7 − 6 = 1 d electron, n = 1, μ = 1.73 BM (paramagnetic). In KMnO₄, Mn is +7, d⁰, μ = 0 (diamagnetic).
Worked example 4.8: By what factor is the spin-only moment of Mn²⁺ larger than that of Ti³⁺?
Solution: Mn²⁺: n = 5, μ = √35 ≈ 5.92 BM. Ti³⁺: n = 1, μ = √3 ≈ 1.73 BM. Ratio = √(35/3) ≈ 3.42.
Quick revision
Paramagnetism comes from unpaired electrons; Fe, Co, Ni metals are ferromagnetic.
Spin-only μ = √(n(n+2)) BM: 1.73, 2.83, 3.87, 4.90, 5.92 for n = 1 to 5.
For high-spin 3d ions, n peaks at d⁵ (Mn²⁺, Fe³⁺) and is equal for dⁿ and d¹⁰⁻ⁿ.
Colour comes from d–d transitions; d⁰ and d¹⁰ ions are colourless.
MnO₄⁻ and Cr₂O₇²⁻ are coloured by charge transfer, not d–d.
Catalysts: V₂O₅ (contact), Fe (Haber), Ni (hydrogenation), TiCl₄ + Al(CH₃)₃ (Ziegler–Natta).
Interstitial compounds (TiC, Fe₃H, VH₀.₅₆): hard, high melting, conducting, inert.
Alloys form because atomic radii are similar: brass Cu–Zn, bronze Cu–Sn.
NEET traps
Using √(n(n+1)) instead of √(n(n+2)).
Counting d electrons as unpaired electrons for d⁶ to d⁹. Fe²⁺ (d⁶) has 4 unpaired, not 6.
Calling Cu⁺ coloured because Cu²⁺ is. Cu⁺ is d¹⁰ and colourless.
Saying KMnO₄ is coloured because of unpaired electrons. Mn(VII) has none; the colour is charge transfer.
Writing that interstitial compounds are reactive or soft. They are hard and inert.
Confusing brass (Cu–Zn) with bronze (Cu–Sn).
Practice MCQs: Chapter 4
Level 1: Concept check
1. The spin-only magnetic moment for n unpaired electrons is (a) √(n(n+1)) BM (b) √(n(n+2)) BM (c) n(n+2) BM (d) √(2n+1) BM
2. The unit in which the magnetic moments of ions are usually expressed is the (a) debye (b) tesla (c) Bohr magneton (d) gauss
3. Which ion is colourless in aqueous solution? (a) Cu²⁺ (b) Ti³⁺ (c) Fe³⁺ (d) Zn²⁺
4. The catalyst used in the Haber process is (a) finely divided iron (b) V₂O₅ (c) nickel (d) platinum
5. An ion with five unpaired electrons has a spin-only magnetic moment of (a) 4.90 BM (b) 5.92 BM (c) 3.87 BM (d) 6.93 BM
6. Brass is an alloy of (a) copper and tin (b) iron and chromium (c) copper and zinc (d) copper and nickel
7. Which metal is ferromagnetic? (a) Zn (b) Cu (c) Sc (d) Ni
8. Interstitial compounds are formed when small atoms such as these occupy gaps in a metal lattice: (a) H, C, N (b) Na, K (c) Cl, Br (d) Xe
9. The catalyst used in the contact process for sulphuric acid is (a) Fe (b) Ni (c) TiCl₄ (d) V₂O₅
10. The colour of most transition metal ions is mainly due to (a) s–s transitions (b) d–d transitions (c) nuclear transitions (d) f–f transitions
Level 2: NEET standard
11. The spin-only magnetic moment of Cr³⁺ is (a) 3.87 BM (b) 2.83 BM (c) 4.90 BM (d) 1.73 BM
12. Which ion has the highest spin-only magnetic moment? (a) V³⁺ (b) Cr³⁺ (c) Fe²⁺ (d) Fe³⁺
13. Which aqua ion has a spin-only magnetic moment of 2.83 BM? (a) Cu²⁺ (b) Ni²⁺ (c) Co²⁺ (d) Mn²⁺
14. The intense purple colour of KMnO₄ is due to (a) d–d transitions in Mn(VII) (b) unpaired electrons on Mn (c) charge transfer from oxygen to manganese (d) f–f transitions
15. Which pair of ions are both colourless? (a) Sc³⁺ and Zn²⁺ (b) Ti³⁺ and Cu⁺ (c) Cu²⁺ and Zn²⁺ (d) V³⁺ and Sc³⁺
16. The Ziegler–Natta catalyst for polymerising ethene is (a) Fe with Mo (b) V₂O₅ (c) TiCl₄ with Al(CH₃)₃ (d) finely divided Ni
17. Which is not a property of interstitial compounds? (a) High melting point (b) Great hardness (c) Metallic conductivity (d) High chemical reactivity
18. Transition metals are good catalysts mainly because they (a) have a single fixed oxidation state (b) show variable oxidation states and can adsorb reactants on their surface (c) are diamagnetic (d) have low melting points
19. The colour of the [Ni(H₂O)₆]²⁺ ion is (a) green (b) pale pink (c) blue (d) yellow
20. Transition metals readily form alloys with each other because (a) their atomic sizes are very different (b) their atomic radii are similar (c) they have very high ionisation enthalpies (d) they are paramagnetic
21. The ratio of the spin-only magnetic moment of Mn²⁺ to that of Ti³⁺ is about (a) 5 (b) 2.5 (c) 3.42 (d) 1.73
22. In the Fe³⁺-catalysed reaction between I⁻ and S₂O₈²⁻, the role of iron is best described as (a) Fe³⁺ raises the activation energy (b) Fe³⁺ combines permanently with sulphate (c) Fe³⁺ is reduced to Fe metal (d) Fe³⁺ oxidises I⁻ to I₂ and becomes Fe²⁺, which S₂O₈²⁻ oxidises back to Fe³⁺
Level 3: Challenge
23. The spin-only magnetic moments of Mn in K₂MnO₄ and KMnO₄ respectively are (a) 0 and 1.73 BM (b) 1.73 and 0 BM (c) 2.83 and 1.73 BM (d) 1.73 and 1.73 BM
24. A divalent 3d ion M²⁺ has a spin-only magnetic moment of 4.90 BM. M could be (a) Mn (b) Co (c) Fe (d) Ni
25. The correct increasing order of spin-only magnetic moment is (a) Fe²⁺ < Co²⁺ < Ni²⁺ < Ti³⁺ (b) Ni²⁺ < Ti³⁺ < Fe²⁺ < Co²⁺ (c) Co²⁺ < Ni²⁺ < Ti³⁺ < Fe²⁺ (d) Ti³⁺ < Ni²⁺ < Co²⁺ < Fe²⁺
26. Which pair of aqua ions has the same spin-only magnetic moment? (a) Co²⁺ and Cr³⁺ (b) Fe²⁺ and Ni²⁺ (c) Mn²⁺ and Fe²⁺ (d) Cu²⁺ and Ni²⁺
27. Which formula represents a typical interstitial compound? (a) NaCl (b) VH₀.₅₆ (c) Fe₂O₃ (d) CuSO₄
28. Which pair of species is coloured even though the metal has a d⁰ configuration? (a) Sc³⁺ and Ti⁴⁺ in water (b) Zn²⁺ and Cu⁺ (c) MnO₄⁻ and Cr₂O₇²⁻ (d) TiCl₄ and ScCl₃
29. Assertion (A): Scandium(III) salts are coloured. Reason (R): Sc³⁺ has a d⁰ configuration. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: The spin-only magnetic moment of Ti³⁺ is 1.73 BM. Statement II: Transition metals form alloys easily because their atomic radii are similar. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | b | μ = √(n(n+2)) from S = n/2 and g ≈ 2. |
| 2 | c | BM is the electron magnetic moment unit. |
| 3 | d | Zn²⁺ is d¹⁰. |
| 4 | a | Fe with Mo as promoter. |
| 5 | b | √35 ≈ 5.92. |
| 6 | c | Bronze is Cu–Sn. |
| 7 | d | Fe, Co, Ni are ferromagnetic. |
| 8 | a | Only small atoms fit in the gaps. |
| 9 | d | V₂O₅ oxidises SO₂ to SO₃. |
| 10 | b | Electron jumps between split d levels. |
| 11 | a | d³: n = 3, √15. |
| 12 | d | Fe³⁺ is d⁵ with n = 5. |
| 13 | b | d⁸: n = 2, √8. |
| 14 | c | Mn(VII) is d⁰; LMCT gives colour. |
| 15 | a | d⁰ and d¹⁰. |
| 16 | c | TiCl₄ + Al(CH₃)₃. |
| 17 | d | They are chemically inert. |
| 18 | b | Easy electron transfer and surface adsorption. |
| 19 | a | Ni²⁺ aqua ion is green. |
| 20 | b | Similar radii allow substitution in the lattice. |
| 21 | c | 5.92 / 1.73 ≈ 3.42. |
| 22 | d | Two steps between oppositely charged ions. |
| 23 | b | Mn(VI) d¹; Mn(VII) d⁰. |
| 24 | c | Fe²⁺ is d⁶ with n = 4. |
| 25 | d | 1.73 < 2.83 < 3.87 < 4.90. |
| 26 | a | Both have n = 3. |
| 27 | b | Non-stoichiometric hydride of V. |
| 28 | c | Both coloured by charge transfer. |
| 29 | d | d⁰ means no d–d transition, so salts are colourless. |
| 30 | a | Both statements are correct. |
Chapter 4 revision sheet
One-page summary
Unpaired electrons make a substance paramagnetic (pulled into a magnetic field); all paired means diamagnetic.
Spin-only magnetic moment depends only on the number of unpaired electrons n:
Colour comes from d–d transitions: light of one colour is absorbed and we see the complementary colour.
d⁰ and d¹⁰ ions (Sc³⁺, Ti⁴⁺, Cu⁺, Zn²⁺) are colourless; MnO₄⁻ and Cr₂O₇²⁻ are coloured by charge transfer, not d–d.
Ligands change the gap between d levels, so the same ion can show different colours in different complexes.
Catalytic power comes from variable oxidation states and a metal surface that adsorbs reactants.
Key catalysts: V₂O₅ (contact process), Fe (Haber process), Ni (hydrogenation of oils), TiCl₄ + Al(CH₃)₃ (Ziegler–Natta polythene), MnO₂ (decomposing KClO₃).
Fe³⁺ speeds up I⁻ + S₂O₈²⁻ by switching between +3 and +2 and is regenerated.
Complex formation is favoured by small, highly charged ions with vacant d orbitals: [Fe(CN)₆]³⁻, [Cu(NH₃)₄]²⁺, [Ni(CN)₄]²⁻.
Interstitial compounds: H, B, C or N in lattice voids (TiC, Mn₄N, Fe₃H, VH₀.₅₆, TiH₁.₇); non-stoichiometric, hard, high-melting, conducting, chemically inert.
Alloys form easily because transition metal atoms have similar radii (within about 15%) and similar properties.
Common alloys: brass (Cu + Zn), bronze (Cu + Sn), stainless steel (Fe + Cr + Ni).
Must-remember table
| Unpaired electrons | μ (BM) | 3d ions with this count (high spin) | Colour in water (examples) |
|---|---|---|---|
| 0 | 0 | Sc³⁺, Ti⁴⁺, Cu⁺, Zn²⁺ | Colourless |
| 1 | 1.73 | Ti³⁺, Cu²⁺ | Purple, blue |
| 2 | 2.83 | V³⁺, Ni²⁺ | Green, green |
| 3 | 3.87 | Cr³⁺, Co²⁺ | Violet, pink |
| 4 | 4.90 | Mn³⁺, Fe²⁺ | Violet, green |
| 5 | 5.92 | Mn²⁺, Fe³⁺ | Pale pink, yellow |
Memory aids
"Moment ≈ n + 1" – for 2 to 5 unpaired electrons, μ is just under n + 1 (2.83, 3.87, 4.90, 5.92).
"VIN catalysts" – V₂O₅ for H₂SO₄, Iron for NH₃, Nickel for hydrogenating oils.
"HBCN in the holes" – H, B, C, N are the small atoms that sit in interstitial voids.
"BraZ and BronTin" – brass = Cu + Zn; bronze = Cu + Tin.
"See the complement" – the colour you see is the one left over, not the one absorbed.
Concept connections
Ligands, crystal field splitting and colour of complexes continue in Chemistry Book 12: Coordination Compounds.
Catalysis and rate links to Chemistry Book 8: Chemical Kinetics.
Ziegler–Natta polymerisation of ethene ties to Chemistry Book 15: Hydrocarbons; hydrogenation of oils to Chemistry Book 17: Organic Compounds Containing Oxygen.
Practice MCQs: Chapter 4, Level 4 (new NEET pattern)
31. Match List I (ion) with List II (spin-only magnetic moment, BM).
List I: A. Ti³⁺ B. Ni²⁺ C. Cr³⁺ D. Fe²⁺
List II: (i) 4.90 (ii) 1.73 (iii) 3.87 (iv) 2.83
(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iii, C-iv, D-i (c) A-ii, B-iv, C-i, D-iii (d) A-ii, B-iv, C-iii, D-i
32. Match List I (aqua ion) with List II (colour).
List I: A. Cu²⁺ B. Fe³⁺ C. Co²⁺ D. Ni²⁺
List II: (i) green (ii) pink (iii) blue (iv) yellow
(a) A-iii, B-iv, C-ii, D-i (b) A-iii, B-ii, C-iv, D-i (c) A-iv, B-iii, C-ii, D-i (d) A-i, B-iv, C-ii, D-iii
33. Match List I (catalyst) with List II (use).
List I: A. V₂O₅ B. Finely divided Fe C. Ni D. TiCl₄ + Al(CH₃)₃
List II: (i) manufacture of NH₃ (ii) polythene from ethene (iii) manufacture of H₂SO₄ (iv) hardening of vegetable oils
(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-ii, B-i, C-iv, D-iii
34. Match List I (material) with List II (description).
List I: A. Brass B. Bronze C. Stainless steel D. Mn₄N
List II: (i) interstitial compound (ii) copper and tin (iii) iron with chromium and nickel (iv) copper and zinc
(a) A-ii, B-iv, C-iii, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-iv, B-ii, C-iii, D-i (d) A-iv, B-ii, C-i, D-iii
35. How many of the following statements are correct?
A. Zn²⁺ salts are white because Zn²⁺ is d¹⁰.
B. The colour we see is the colour of the light absorbed.
C. Paramagnetism increases with the number of unpaired electrons.
D. Interstitial compounds are usually softer than the pure metal.
E. Transition metals catalyse reactions partly because they change oxidation state easily.
(a) 2 (b) 4 (c) 5 (d) 3
36. Choose the correct set of statements about interstitial compounds.
A. Small atoms such as H, C and N sit in voids of the metal lattice.
B. They are usually non-stoichiometric, for example VH₀.₅₆.
C. They are chemically very reactive.
D. Their melting points are high, often higher than the pure metal.
(a) A, B and D only (b) A and C only (c) B, C and D only (d) A, B, C and D
37. How many of the following ions are coloured in aqueous solution?
Sc³⁺, Ti³⁺, V³⁺, Cu⁺, Mn²⁺, Zn²⁺, Co²⁺
(a) 3 (b) 4 (c) 5 (d) 6
38. Choose the correct set of statements about complex formation.
A. Transition metal ions form many complexes because they are small and highly charged.
B. Vacant d orbitals of suitable energy accept lone pairs from ligands.
C. Only neutral ligands can bind to transition metal ions.
D. [Cu(NH₃)₄]²⁺ is a deep blue complex ion.
(a) A and B only (b) B, C and D only (c) A, B and D only (d) A, C and D only
39. Four ions X, Y, Z and W have measured magnetic moments close to the spin-only values in the table.
| Ion | X | Y | Z | W |
|---|---|---|---|---|
| μ (BM) | 5.92 | 0 | 3.87 | 2.83 |
Which identification is fully correct? (a) X = Fe³⁺, Y = Zn²⁺, Z = Cr³⁺, W = Ni²⁺ (b) X = Fe²⁺, Y = Cu⁺, Z = V³⁺, W = Ni²⁺ (c) X = Mn²⁺, Y = Ti⁴⁺, Z = Co²⁺, W = Cu²⁺ (d) X = Co³⁺, Y = Zn²⁺, Z = Cr³⁺, W = Ni²⁺
40. A bar chart shows the spin-only magnetic moment of the gaseous M²⁺ ions from Ti²⁺ (d²) to Zn²⁺ (d¹⁰). The bars rise to a single tallest bar and then fall to zero. The tallest bar belongs to (a) Fe²⁺, 4.90 BM (b) Cr²⁺, 5.92 BM (c) Mn²⁺, 5.92 BM (d) Mn²⁺, 4.90 BM
41. The reaction of I⁻ with S₂O₈²⁻ is slow, but fast with a trace of Fe³⁺. The two steps are:
Step 1: 2Fe³⁺ + 2I⁻ → 2Fe²⁺ + I₂
Step 2: 2Fe²⁺ + S₂O₈²⁻ → 2Fe³⁺ + 2SO₄²⁻
Which statement is correct? (a) Fe³⁺ is used up in the reaction (b) The net reaction is 2I⁻ + S₂O₈²⁻ → I₂ + 2SO₄²⁻, and Fe³⁺ is regenerated (c) Fe²⁺ is the final product (d) Iron changes by two oxidation units in each step
Passage for Q42–43: A school lab has two salts. Salt X dissolves to give a violet solution of a 3d metal ion M³⁺ with the configuration 3d³. Salt Y is a very pale pink manganese(II) salt.
42. The spin-only magnetic moment of M³⁺ in X is (a) 1.73 BM (b) 2.83 BM (c) 4.90 BM (d) 3.87 BM
43. Which statement about the ion in Y is correct? (a) It has five unpaired electrons, μ ≈ 5.92 BM, and its pale colour comes from very weak d–d absorption (b) It is d⁰ and colourless (c) It is diamagnetic (d) It has four unpaired electrons
44. A 3d ion M²⁺ has a spin-only magnetic moment of 4.90 BM. M can be (a) Mn or Co (b) Cr or Fe (c) V or Ni (d) Ti or Cu
45. The total number of unpaired electrons in Fe³⁺, Co²⁺ and Ni²⁺ (high-spin aqua ions) taken together is (a) 8 (b) 9 (c) 11 (d) 10
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | d | Unpaired: Ti³⁺ 1, Ni²⁺ 2, Cr³⁺ 3, Fe²⁺ 4. |
| 32 | a | Cu²⁺ blue, Fe³⁺ yellow, Co²⁺ pink, Ni²⁺ green. |
| 33 | b | V₂O₅ contact process, Fe Haber, Ni hydrogenation, Ziegler–Natta for polythene. |
| 34 | c | Brass Cu–Zn, bronze Cu–Sn, stainless steel Fe–Cr–Ni, Mn₄N interstitial. |
| 35 | d | A, C, E correct; we see the complementary colour; interstitials are harder. |
| 36 | a | Interstitial compounds are chemically inert. |
| 37 | b | Ti³⁺, V³⁺, Mn²⁺, Co²⁺ are coloured; Sc³⁺, Cu⁺, Zn²⁺ are d⁰ or d¹⁰. |
| 38 | c | Anionic ligands such as CN⁻ also bind; C is false. |
| 39 | a | Fe³⁺ 5, Zn²⁺ 0, Cr³⁺ 3, Ni²⁺ 2 unpaired; others mix wrong counts (Fe²⁺ 4, Cu²⁺ 1, Co³⁺ 4). |
| 40 | c | Mn²⁺ is d⁵ with 5 unpaired: √35 = 5.92 BM. |
| 41 | b | Adding the steps cancels iron; Fe³⁺ is a catalyst that changes by one unit. |
| 42 | d | 3 unpaired: √15 = 3.87 BM. |
| 43 | a | Mn²⁺ is high-spin d⁵; its d–d bands are very weak, hence pale pink. |
| 44 | b | 4.90 BM means 4 unpaired: d⁴ (Cr²⁺) or high-spin d⁶ (Fe²⁺). |
| 45 | d | 5 + 3 + 2 = 10. |