Chapter 8 of 11 · 22 min read

Chapter 6: Potassium Permanganate

What you will learn

  • How KMnO₄ is made from pyrolusite through manganate, and the commercial and laboratory routes.

  • Its physical properties, thermal decomposition and magnetic behaviour.

  • The tetrahedral structure of the permanganate and manganate ions.

  • Its oxidising reactions in acidic, neutral or faintly alkaline, and strongly alkaline media.

  • Its uses and the standard titration and stoichiometry calculations.

6.1 Introduction

Potassium permanganate, KMnO₄, forms dark purple, almost black, crystals with a metallic shine. Mn is in its highest state, +7. A few crystals in a bucket of water give a pink solution. Many families use such a solution to wash vegetables or disinfect well water after the monsoon.

6.2 Preparation

From pyrolusite (MnO₂). The process has two stages.

Stage 1: Fusion to manganate. MnO₂ is fused with KOH in the presence of air or an oxidising agent such as KNO₃. Dark green potassium manganate forms, with Mn at +6.

2MnO2+4KOH+O2→2K2MnO4+2H2O\mathrm{2MnO_2 + 4KOH + O_2 \rightarrow 2K_2MnO_4 + 2H_2O}

Stage 2: Manganate to permanganate. The green manganate is extracted with water. In neutral or acidic solution it disproportionates. Two Mn(VI) go up to Mn(VII) and one goes down to Mn(IV).

3MnO42−+4H+→2MnO4−+MnO2+2H2O\mathrm{3MnO_4^{2-} + 4H^+ \rightarrow 2MnO_4^- + MnO_2 + 2H_2O}

Commercial method. Industry also starts with alkaline oxidative fusion of MnO₂ to manganate. The manganate is then oxidised electrolytically in alkaline solution. At the anode:

MnO42−→electrolytic oxidationMnO4−+e−\mathrm{MnO_4^{2-} \xrightarrow{\text{electrolytic oxidation}} MnO_4^- + e^-}

This route converts all the manganate into permanganate, with no MnO₂ lost.

Laboratory method. A Mn(II) salt is oxidised by peroxodisulphate:

2Mn2++5S2O82−+8H2O→2MnO4−+10SO42−+16H+\mathrm{2Mn^{2+} + 5S_2O_8^{2-} + 8H_2O \rightarrow 2MnO_4^- + 10SO_4^{2-} + 16H^+}
RouteStarting Mn speciesMn oxidation states
Fusion, then disproportionationMnO₂+4 → +6 → +7 (and +4)
Fusion, then electrolysisMnO₂+4 → +6 → +7
PeroxodisulphateMn²⁺+2 → +7

6.3 Physical properties

  • Dark purple crystals; the solid is isostructural with KClO₄.

  • Moderately soluble in water at room temperature (about 6.4 g per 100 g water at 293 K), giving an intense purple solution.

  • Decomposes on heating at 513 K, releasing oxygen:

2KMnO4→513 KK2MnO4+MnO2+O2\mathrm{2KMnO_4 \xrightarrow{513\,K} K_2MnO_4 + MnO_2 + O_2}
  • Magnetic behaviour. In MnO₄⁻, Mn(VII) is d⁰, so the ion is diamagnetic. In MnO₄²⁻, Mn(VI) is d¹, so manganate is paramagnetic with one unpaired electron (μ ≈ 1.73 BM).

  • Colour. Permanganate's purple colour is from ligand-to-metal charge transfer, as explained in Chapter 4. Manganate is green.

6.4 Structure

Both MnO₄⁻ and MnO₄²⁻ are tetrahedral. Mn sits at the centre and four O atoms occupy the corners. The Mn–O bonds have partial double-bond character. This π bonding comes from overlap of filled oxygen p orbitals with empty manganese d orbitals. All four Mn–O bonds are equivalent because of resonance.

Figure 6.1 · Tetrahedral permanganate and manganate ions (schematic)
Figure 6.1 · Tetrahedral permanganate and manganate ions (schematic)

The two ions have the same tetrahedral shape; the extra electron in manganate (d¹) makes it paramagnetic and green, while d⁰ permanganate is diamagnetic and purple.

6.5 Oxidising action: the medium decides the product

The same purple ion gives different products depending on the pH. Think of it like a train that stops at different stations depending on the line it is on.

MediumHalf-reactionElectrons gainedProduct and colourE° (V)
AcidicMnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O5Mn²⁺, nearly colourless+1.52
Neutral or faintly alkalineMnO₄⁻ + 2H₂O + 3e⁻ → MnO₂ + 4OH⁻3MnO₂, brown precipitate+0.59
Strongly alkalineMnO₄⁻ + e⁻ → MnO₄²⁻1MnO₄²⁻, green+0.56

Permanganate is a stronger oxidant in acid. The large number of H⁺ ions on the left pulls the reaction forward.

Reactions in acidic medium.

  • Iodide to iodine:

10I−+2MnO4−+16H+→2Mn2++8H2O+5I2\mathrm{10I^- + 2MnO_4^- + 16H^+ \rightarrow 2Mn^{2+} + 8H_2O + 5I_2}
  • Iron(II) to iron(III):

5Fe2++MnO4−+8H+→Mn2++4H2O+5Fe3+\mathrm{5Fe^{2+} + MnO_4^- + 8H^+ \rightarrow Mn^{2+} + 4H_2O + 5Fe^{3+}}
  • Oxalate to carbon dioxide (solution warmed to about 333 K):

5C2O42−+2MnO4−+16H+→2Mn2++8H2O+10CO2\mathrm{5C_2O_4^{2-} + 2MnO_4^- + 16H^+ \rightarrow 2Mn^{2+} + 8H_2O + 10CO_2}
  • Hydrogen sulphide to sulphur:

5H2S+2MnO4−+6H+→2Mn2++8H2O+5S\mathrm{5H_2S + 2MnO_4^- + 6H^+ \rightarrow 2Mn^{2+} + 8H_2O + 5S}
  • Sulphite to sulphate:

5SO32−+2MnO4−+6H+→2Mn2++3H2O+5SO42−\mathrm{5SO_3^{2-} + 2MnO_4^- + 6H^+ \rightarrow 2Mn^{2+} + 3H_2O + 5SO_4^{2-}}
  • Nitrite to nitrate:

5NO2−+2MnO4−+6H+→2Mn2++5NO3−+3H2O\mathrm{5NO_2^- + 2MnO_4^- + 6H^+ \rightarrow 2Mn^{2+} + 5NO_3^- + 3H_2O}

The oxalate reaction starts slowly. Once some Mn²⁺ forms, it catalyses the reaction and the rate jumps. This is autocatalysis.

Which acid to use. Titrations use dilute H₂SO₄. HCl is avoided because KMnO₄ oxidises Cl⁻ to Cl₂, using up extra permanganate. HNO₃ is avoided because it is itself an oxidising agent.

Self-indicator. In a titration, each drop of KMnO₄ loses its purple colour as long as reducing agent remains. The first lasting pale pink shows the end point. No extra indicator is needed.

Reactions in neutral or faintly alkaline medium.

  • Iodide to iodate:

2MnO4−+H2O+I−→2MnO2+2OH−+IO3−\mathrm{2MnO_4^- + H_2O + I^- \rightarrow 2MnO_2 + 2OH^- + IO_3^-}
  • Thiosulphate to sulphate:

8MnO4−+3S2O32−+H2O→8MnO2+6SO42−+2OH−\mathrm{8MnO_4^- + 3S_2O_3^{2-} + H_2O \rightarrow 8MnO_2 + 6SO_4^{2-} + 2OH^-}
  • Manganese(II) to MnO₂ (in the presence of zinc sulphate or zinc oxide):

2MnO4−+3Mn2++2H2O→5MnO2+4H+\mathrm{2MnO_4^- + 3Mn^{2+} + 2H_2O \rightarrow 5MnO_2 + 4H^+}

Compare iodide in the two media. In acid, I⁻ goes only to I₂. In neutral or faintly alkaline solution, it goes all the way to IO₃⁻.

Equivalent mass depends on the medium (M = 158):

MediumElectrons gainedEquivalent mass (g/eq)
Acidic5158/5 = 31.6
Neutral or faintly alkaline3158/3 ≈ 52.7
Strongly alkaline1158

6.6 Uses

  • Oxidising agent in the laboratory and in industry.

  • Volumetric analysis: estimation of Fe²⁺, oxalate, H₂O₂ and nitrite, as a self-indicator.

  • Bleaching of wool, cotton and silk, and decolourising oils.

  • Disinfectant and antiseptic in dilute solution.

  • Cold, dilute, alkaline KMnO₄ (Baeyer's reagent) tests for unsaturation in organic compounds: the purple colour disappears.

6.7 Worked examples

Worked example 6.1: Give the oxidation state of Mn in MnO₂, K₂MnO₄ and KMnO₄.

Solution: MnO₂: x + 2(−2) = 0, x = +4. K₂MnO₄: 2(+1) + x + 4(−2) = 0, x = +6. KMnO₄: +1 + x + 4(−2) = 0, x = +7.

Worked example 6.2: How many moles of KMnO₄ are needed to oxidise 1 mol of FeSO₄ in acid?

Solution: MnO₄⁻ gains 5 electrons and each Fe²⁺ gives 1. So 1 mol MnO₄⁻ oxidises 5 mol Fe²⁺. For 1 mol Fe²⁺, KMnO₄ = 1/5 = 0.2 mol.

Worked example 6.3: Why is HCl not used to acidify KMnO₄ in titrations?

Solution: E°(MnO₄⁻/Mn²⁺) = 1.52 V is higher than E°(Cl₂/Cl⁻) = 1.36 V. So permanganate oxidises chloride to chlorine. Part of the KMnO₄ is wasted on HCl, and the titre comes out too high.

Worked example 6.4: What volume of 0.02 M KMnO₄ is needed to oxidise 20 mL of 0.1 M oxalic acid in acid?

Solution: Moles of oxalate = 0.020 × 0.1 = 2.0 × 10⁻³ mol. From the equation, 2 MnO₄⁻ react with 5 C₂O₄²⁻. Moles of KMnO₄ = (2/5) × 2.0 × 10⁻³ = 8.0 × 10⁻⁴ mol.

V=8.0×10−40.02=0.040 L=40 mLV = \frac{8.0 \times 10^{-4}}{0.02} = 0.040\ \mathrm{L} = 40\ \mathrm{mL}

Worked example 6.5: A sample of 0.392 g of Mohr's salt, FeSO₄·(NH₄)₂SO₄·6H₂O (M = 392), is titrated with 0.02 M KMnO₄ in acid. Find the volume used.

Solution: Moles of Fe²⁺ = 0.392/392 = 1.0 × 10⁻³ mol. Moles of KMnO₄ = 1.0 × 10⁻³ / 5 = 2.0 × 10⁻⁴ mol. Volume = 2.0 × 10⁻⁴ / 0.02 = 0.010 L = 10 mL.

Worked example 6.6: What volume of O₂ at STP is released when 15.8 g of KMnO₄ is heated at 513 K?

Solution: 15.8 g is 0.1 mol. From 2KMnO₄ → K₂MnO₄ + MnO₂ + O₂, 0.1 mol gives 0.05 mol O₂. Volume = 0.05 × 22.4 = 1.12 L.

Worked example 6.7: Find the equivalent mass of KMnO₄ in acidic, neutral and strongly alkaline media, and their ratio.

Solution: 158/5 = 31.6, 158/3 ≈ 52.7 and 158/1 = 158. The ratio is (1/5) : (1/3) : 1. Multiply by 15 to get 3 : 5 : 15.

Worked example 6.8: 8.7 g of MnO₂ (M = 87) is fused with KOH and air, and the manganate formed is allowed to disproportionate in acid. What mass of KMnO₄ forms at best?

Solution: 8.7 g MnO₂ is 0.1 mol, which gives 0.1 mol K₂MnO₄. From 3MnO₄²⁻ → 2MnO₄⁻ + MnO₂, only 2/3 of it becomes permanganate. Moles of KMnO₄ = (2/3) × 0.1 = 0.0667 mol.

m=0.0667×158≈10.5 gm = 0.0667 \times 158 \approx 10.5\ \mathrm{g}

Worked example 6.9: In faintly alkaline solution, how many moles of KMnO₄ are needed per mole of I⁻, and what is the product?

Solution: From 2MnO₄⁻ + H₂O + I⁻ → 2MnO₂ + 2OH⁻ + IO₃⁻, 2 mol KMnO₄ are needed per mol I⁻. The product is iodate, IO₃⁻. Check electrons: I goes from −1 to +5 (6 electrons), and 2 Mn each gain 3 (6 electrons).

Quick revision

  • MnO₂ + KOH + O₂ (fusion) → green K₂MnO₄; 3MnO₄²⁻ + 4H⁺ → 2MnO₄⁻ + MnO₂ + 2H₂O.

  • Commercially, manganate is oxidised electrolytically; in the lab, Mn²⁺ is oxidised by S₂O₈²⁻.

  • 2KMnO₄ → K₂MnO₄ + MnO₂ + O₂ at 513 K.

  • MnO₄⁻: tetrahedral, d⁰, diamagnetic, purple (charge transfer). MnO₄²⁻: tetrahedral, d¹, paramagnetic, green.

  • Acid: 5e⁻ → Mn²⁺. Neutral or faintly alkaline: 3e⁻ → MnO₂. Strongly alkaline: 1e⁻ → MnO₄²⁻.

  • In acid: I⁻ → I₂, Fe²⁺ → Fe³⁺, C₂O₄²⁻ → CO₂, H₂S → S, SO₃²⁻ → SO₄²⁻, NO₂⁻ → NO₃⁻.

  • In neutral: I⁻ → IO₃⁻, S₂O₃²⁻ → SO₄²⁻, Mn²⁺ → MnO₂.

  • Use dilute H₂SO₄, never HCl; KMnO₄ is a self-indicator.

NEET traps

  • Taking the equivalent mass of KMnO₄ as 31.6 in every medium. It is 31.6 only in acid.

  • Writing I₂ as the product of I⁻ in neutral solution. It is IO₃⁻.

  • Saying MnO₄⁻ is coloured because of unpaired electrons. It has none; the colour is charge transfer.

  • Forgetting that manganate disproportionation gives only 2/3 of the Mn as permanganate.

  • Mixing up the colours: manganate is green, permanganate is purple.

  • Thinking any strong acid works in the titration. HCl gets oxidised to Cl₂.

Practice MCQs: Chapter 6

Level 1: Concept check

1. The ore used to make KMnO₄ is (a) chromite (b) pyrolusite (c) magnetite (d) cinnabar

2. The oxidation state of Mn in KMnO₄ is (a) +6 (b) +4 (c) +7 (d) +2

3. The colour of potassium manganate, K₂MnO₄, is (a) dark green (b) purple (c) orange (d) colourless

4. The shape of the permanganate ion is (a) octahedral (b) square planar (c) pyramidal (d) tetrahedral

5. In acid solution, MnO₄⁻ is reduced to (a) MnO₂ (b) Mn²⁺ (c) MnO₄²⁻ (d) Mn

6. In neutral or faintly alkaline solution, MnO₄⁻ is reduced to (a) Mn²⁺ (b) MnO₄²⁻ (c) MnO₂ (d) Mn₂O₃

7. The acid used to acidify KMnO₄ in titrations is (a) dilute H₂SO₄ (b) HCl (c) HNO₃ (d) CH₃COOH

8. No separate indicator is needed in KMnO₄ titrations because (a) KMnO₄ is colourless (b) Fe³⁺ acts as the indicator (c) phenolphthalein is already present (d) the purple colour of KMnO₄ persists only after the end point

9. The number of electrons gained by one MnO₄⁻ ion in acid solution is (a) 3 (b) 5 (c) 1 (d) 7

10. On heating at 513 K, KMnO₄ gives (a) K₂MnO₄, MnO₂ and O₂ (b) K₂O and Mn₂O₇ (c) Mn and O₂ (d) KMnO₃ and O₂

Level 2: NEET standard

11. The equivalent mass of KMnO₄ (M = 158) in acid solution is (a) 158 (b) 52.7 (c) 31.6 (d) 79

12. The number of moles of KMnO₄ needed to oxidise 1 mol of Fe²⁺ in acid is (a) 0.2 (b) 5 (c) 0.5 (d) 1

13. Which statement about magnetic behaviour is correct? (a) Both MnO₄⁻ and MnO₄²⁻ are paramagnetic (b) Both are diamagnetic (c) MnO₄⁻ is paramagnetic and MnO₄²⁻ is diamagnetic (d) MnO₄⁻ is diamagnetic and MnO₄²⁻ is paramagnetic

14. In the disproportionation of MnO₄²⁻ in acid, the mole ratio MnO₄⁻ : MnO₂ formed is (a) 1 : 2 (b) 2 : 1 (c) 1 : 1 (d) 3 : 1

15. In faintly alkaline solution, KMnO₄ oxidises iodide to (a) I₂ (b) IO⁻ (c) IO₃⁻ (d) IO₄⁻

16. In neutral solution, KMnO₄ oxidises thiosulphate to (a) SO₄²⁻ (b) S (c) S₄O₆²⁻ (d) SO₂

17. HCl is not used to acidify KMnO₄ solution in titrations because (a) HCl is a weak acid (b) HCl precipitates manganese (c) HCl reduces Fe³⁺ (d) KMnO₄ oxidises HCl to Cl₂, using up extra KMnO₄

18. In the laboratory, KMnO₄ can be made by oxidising a Mn(II) salt with (a) KCl (b) peroxodisulphate (c) hydrogen (d) zinc

19. For titration with KMnO₄, an oxalate solution is first warmed to about (a) 273 K (b) 573 K (c) 200 K (d) 333 K

20. When oxalate is oxidised by acidified KMnO₄, the moles of CO₂ formed per mole of MnO₄⁻ is (a) 2.5 (b) 10 (c) 5 (d) 2

21. The equivalent mass of KMnO₄ in neutral medium is about (a) 52.7 (b) 31.6 (c) 158 (d) 79

22. The intense colour of the permanganate ion is due to (a) d–d transitions (b) charge transfer from oxygen to manganese (c) unpaired electrons on Mn (d) the K⁺ ion

Level 3: Challenge

23. The volume of 0.02 M KMnO₄ needed to oxidise 20 mL of 0.1 M oxalic acid in acid is (a) 100 mL (b) 16 mL (c) 40 mL (d) 20 mL

24. 8.7 g of MnO₂ is converted to K₂MnO₄, which then disproportionates fully in acid. The maximum mass of KMnO₄ formed is about (a) 15.8 g (b) 10.5 g (c) 5.3 g (d) 7.9 g

25. The volume of 0.02 M KMnO₄ needed to titrate 0.392 g of Mohr's salt (M = 392) in acid is (a) 10 mL (b) 50 mL (c) 20 mL (d) 2 mL

26. The volume of O₂ at STP released on heating 15.8 g of KMnO₄ at 513 K is (a) 2.24 L (b) 0.56 L (c) 4.48 L (d) 1.12 L

27. The equivalent masses of KMnO₄ in acidic, neutral and strongly alkaline media are in the ratio (a) 5 : 3 : 1 (b) 3 : 5 : 15 (c) 1 : 3 : 5 (d) 15 : 5 : 3

28. When MnO₄⁻ reacts with Mn²⁺ in the presence of ZnO, the manganese-containing product is (a) MnO₄²⁻ (b) Mn₂O₇ (c) MnO₂ (d) Mn³⁺

29. Assertion (A): KMnO₄ is diamagnetic but intensely coloured. Reason (R): Its colour arises from ligand-to-metal charge transfer, which needs no unpaired electrons. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: In strongly alkaline solution, MnO₄⁻ is reduced to green MnO₄²⁻. Statement II: KMnO₄ titrations are normally carried out in HCl medium. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bPyrolusite is MnO₂.
2c+1 + x − 8 = 0.
3aMn(VI) manganate is green.
4dFour O around Mn.
5bGains 5 electrons to Mn²⁺.
6cGains 3 electrons to MnO₂.
7aNot oxidised by KMnO₄ and not an oxidant itself.
8dKMnO₄ acts as self-indicator.
9b+7 → +2.
10a2KMnO₄ → K₂MnO₄ + MnO₂ + O₂.
11c158/5.
12a1 MnO₄⁻ per 5 Fe²⁺.
13dd⁰ vs d¹.
14b3MnO₄²⁻ → 2MnO₄⁻ + MnO₂.
15cNeutral medium takes I⁻ to +5.
16a8MnO₄⁻ + 3S₂O₃²⁻ → 6SO₄²⁻.
17dE° 1.52 V > 1.36 V for Cl₂/Cl⁻.
18b2Mn²⁺ + 5S₂O₈²⁻ → 2MnO₄⁻.
19dReaction is slow at room temperature.
20c10 CO₂ per 2 MnO₄⁻.
21a158/3.
22bLMCT in a d⁰ ion.
23c(2/5) × 2 × 10⁻³ ÷ 0.02 = 40 mL.
24b(2/3) × 0.1 × 158 ≈ 10.5 g.
25a10⁻³/5 mol ÷ 0.02 M = 10 mL.
26d0.1 mol KMnO₄ gives 0.05 mol O₂.
27b(1/5) : (1/3) : 1 = 3 : 5 : 15.
28c2MnO₄⁻ + 3Mn²⁺ + 2H₂O → 5MnO₂ + 4H⁺.
29aLMCT explains colour without unpaired electrons.
30cHCl is avoided, so II is false.

Chapter 6 revision sheet

One-page summary

  • Starting material: pyrolusite, MnO₂.

  • Fusion with KOH and an oxidant (air or KNO₃) gives dark green potassium manganate: 2MnO₂ + 4KOH + O₂ → 2K₂MnO₄ + 2H₂O.

  • Manganate disproportionates in neutral or acid solution: 3MnO₄²⁻ + 4H⁺ → 2MnO₄⁻ + MnO₂ + 2H₂O.

  • Commercial route: alkaline oxidative fusion, then electrolytic oxidation MnO₄²⁻ → MnO₄⁻ + e⁻.

  • Lab route: Mn²⁺ oxidised by peroxodisulfate: 2Mn²⁺ + 5S₂O₈²⁻ + 8H₂O → 2MnO₄⁻ + 10SO₄²⁻ + 16H⁺.

  • KMnO₄: dark purple crystals, only sparingly soluble in water; on heating at 513 K: 2KMnO₄ → K₂MnO₄ + MnO₂ + O₂.

  • MnO₄⁻ (purple, d⁰, diamagnetic) and MnO₄²⁻ (green, d¹, paramagnetic) are both tetrahedral with p–d π bonding.

  • Acid medium (H₂SO₄, never HCl): 5 electrons, product Mn²⁺, E° = +1.52 V.

  • Neutral or faintly alkaline: 3 electrons, product MnO₂ (I⁻ → IO₃⁻, S₂O₃²⁻ → SO₄²⁻, Mn²⁺ → MnO₂).

  • Strongly alkaline: 1 electron, product MnO₄²⁻.

  • In acid it oxidises Fe²⁺, I⁻, C₂O₄²⁻ (warm, about 333 K), H₂S, SO₃²⁻, NO₂⁻.

  • Self-indicator: the first excess drop leaves the solution pink.

  • Uses: lab oxidant, Baeyer's reagent for C=C, bleaching wool, cotton and silk, decolourising oils, disinfectant.

MnO4−+8H++5e−→Mn2++4H2O\mathrm{MnO_4^- + 8H^+ + 5e^- \rightarrow Mn^{2+} + 4H_2O}
MnO4−+2H2O+3e−→MnO2+4OH−\mathrm{MnO_4^- + 2H_2O + 3e^- \rightarrow MnO_2 + 4OH^-}

Must-remember table

MediumProductElectrons per MnO₄⁻Equivalent mass of KMnO₄ (M = 158)
AcidicMn²⁺ (colourless)531.6
Neutral / faintly alkalineMnO₂ (brown ppt)352.7
Strongly alkalineMnO₄²⁻ (green)1158
Titration (acid)Mole ratio MnO₄⁻ : reductant
Fe²⁺1 : 5
C₂O₄²⁻2 : 5
FeC₂O₄3 : 5
H₂O₂2 : 5

Memory aids

  • "Acid 5, Neutral 3, Alkali 1" – electrons gained by MnO₄⁻ in each medium.

  • "Green goes to Purple" – green manganate (+6) is oxidised to purple permanganate (+7).

  • "No HCl near KMnO₄" – HCl would be oxidised to Cl₂ and spoil the titre; use dilute H₂SO₄.

  • "Pyro → Pot → Perm" – pyrolusite → potassium manganate → permanganate.

  • "Warm the oxalate" – oxalate titrations are done near 333 K; Mn²⁺ formed then speeds the reaction.

Concept connections

  • Balancing by ion–electron method and n-factor come from Chemistry Book 7: Redox Reactions and Electrochemistry; mole ratios from Chemistry Book 1: Some Basic Concepts in Chemistry.

  • Baeyer's test for unsaturation belongs to Chemistry Book 15: Hydrocarbons.

  • Redox titrations with KMnO₄ are practised in Chemistry Book 20: Principles Related to Practical Chemistry; autocatalysis links to Chemistry Book 8: Chemical Kinetics.

Practice MCQs: Chapter 6, Level 4 (new NEET pattern)

31. Match List I (condition) with List II (result for KMnO₄).

  • List I: A. Acidic solution B. Neutral or faintly alkaline solution C. Strongly alkaline solution D. Solid heated to 513 K

  • List II: (i) MnO₂, 3 electrons per MnO₄⁻ (ii) K₂MnO₄, MnO₂ and O₂ (iii) Mn²⁺, 5 electrons per MnO₄⁻ (iv) MnO₄²⁻, 1 electron per MnO₄⁻

(a) A-iii, B-iv, C-i, D-ii (b) A-i, B-iii, C-iv, D-ii (c) A-iii, B-i, C-ii, D-iv (d) A-iii, B-i, C-iv, D-ii

32. Match List I (species oxidised by acidified KMnO₄) with List II (product).

  • List I: A. I⁻ B. C₂O₄²⁻ C. SO₃²⁻ D. NO₂⁻

  • List II: (i) SO₄²⁻ (ii) I₂ (iii) NO₃⁻ (iv) CO₂

(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-i, C-iv, D-iii (d) A-ii, B-iv, C-iii, D-i

33. Match List I (manganese species) with List II (description).

  • List I: A. MnO₄⁻ B. MnO₄²⁻ C. MnO₂ D. Mn²⁺(aq)

  • List II: (i) green, paramagnetic with one unpaired electron (ii) very pale pink d⁵ ion (iii) purple and diamagnetic (iv) dark brown-black solid used as the starting ore

(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-iii, B-i, C-iv, D-ii (d) A-iii, B-i, C-ii, D-iv

34. Match List I (reductant) with List II (mole ratio MnO₄⁻ : reductant).

  • List I: A. Fe²⁺ (acid) B. C₂O₄²⁻ (acid) C. FeC₂O₄ (acid) D. S₂O₃²⁻ (neutral, to SO₄²⁻)

  • List II: (i) 8 : 3 (ii) 1 : 5 (iii) 3 : 5 (iv) 2 : 5

(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-iii, C-iv, D-i (d) A-i, B-iv, C-iii, D-ii

35. How many of the following statements are correct?

  • A. HCl is not used to acidify KMnO₄ because it is oxidised to Cl₂.

  • B. KMnO₄ acts as its own indicator in acid titrations.

  • C. The oxalate titration is carried out warm, at about 333 K.

  • D. In faintly alkaline solution, KMnO₄ oxidises I⁻ to I₂.

  • E. KMnO₄ is highly soluble in water at room temperature.

(a) 4 (b) 2 (c) 3 (d) 5

36. Choose the correct set of statements about the preparation of KMnO₄.

  • A. MnO₂ is fused with KOH in the presence of air or KNO₃ to give green K₂MnO₄.

  • B. Manganate disproportionates in acid into permanganate and MnO₂.

  • C. Commercially, manganate is oxidised to permanganate electrolytically.

  • D. In the lab, Mn²⁺ can be oxidised to MnO₄⁻ by peroxodisulfate.

(a) A and B only (b) A, B and C only (c) B, C and D only (d) A, B, C and D

37. How many of these statements about structure are correct?

  • A. MnO₄⁻ is tetrahedral.

  • B. MnO₄⁻ is paramagnetic.

  • C. MnO₄²⁻ has one unpaired electron.

  • D. π bonding in MnO₄⁻ uses overlap of oxygen p orbitals with manganese d orbitals.

(a) 1 (b) 3 (c) 2 (d) 4

38. Choose the correct set of statements about uses of KMnO₄.

  • A. Cold, dilute, alkaline KMnO₄ (Baeyer's reagent) tests for C=C.

  • B. It is used to bleach wool, cotton and silk.

  • C. It is the usual primary standard for titrations.

  • D. Its dilute solution is used as a disinfectant.

(a) A, B and D only (b) A and B only (c) B, C and D only (d) A, C and D only

39. 10.0 mL of 0.1 M oxalic acid is titrated with KMnO₄ in acid. The burette readings are shown.

Trial123
Volume of KMnO₄ (mL)20.119.920.0

The molarity of KMnO₄ is (a) 0.05 M (b) 0.02 M (c) 0.04 M (d) 0.01 M

40. Data: M(KMnO₄) = 158 g/mol. Its equivalent masses in acidic, neutral and strongly alkaline media are, in order, (a) 52.7, 31.6, 158 (b) 158, 52.7, 31.6 (c) 31.6, 52.7, 158 (d) 31.6, 158, 52.7

41. In an oxalate titration at room temperature, a student notes the time each drop of KMnO₄ takes to lose its colour. The first few drops take many seconds; later drops lose colour almost at once. The best explanation is (a) the solution cools down (b) Mn²⁺ formed in the reaction catalyses it (c) oxalate concentration rises (d) KMnO₄ decomposes on standing

Passage for Q42–43: A pharmacist dissolves a few KMnO₄ crystals in water to make a pink wound wash. In the lab, a student heats 3.16 g of dry KMnO₄ (M = 158 g/mol) to 513 K and holds a glowing splint at the mouth of the tube.

42. The splint (a) goes out, as CO₂ is released (b) burns with a pop, as H₂ is released (c) relights, as O₂ is released (d) shows no change

43. Assuming complete decomposition, the mass of O₂ released is (a) 0.32 g (b) 0.16 g (c) 0.64 g (d) 1.28 g

44. How many moles of FeC₂O₄ are oxidised by 0.012 mol KMnO₄ in acid? (a) 0.06 (b) 0.012 (c) 0.03 (d) 0.02

45. In neutral solution: 8MnO₄⁻ + 3S₂O₃²⁻ + H₂O → 8MnO₂ + 6SO₄²⁻ + 2OH⁻. Moles of MnO₂ formed when 0.3 mol S₂O₃²⁻ is fully oxidised: (a) 0.8 (b) 0.3 (c) 0.24 (d) 1.6

Level 4 answer key

QAnsReason
31dAcid Mn²⁺ (5e), neutral MnO₂ (3e), strong alkali MnO₄²⁻ (1e); heat gives K₂MnO₄ + MnO₂ + O₂.
32aI⁻ → I₂, C₂O₄²⁻ → CO₂, SO₃²⁻ → SO₄²⁻, NO₂⁻ → NO₃⁻.
33cPermanganate purple d⁰; manganate green d¹; MnO₂ is pyrolusite; Mn²⁺ pale pink d⁵.
34bElectrons: Fe²⁺ 1, C₂O₄²⁻ 2, FeC₂O₄ 3, each MnO₄⁻ 5; thiosulfate ratio from the neutral equation.
35cA, B, C correct; neutral gives IO₃⁻; KMnO₄ is only sparingly soluble.
36dAll four are correct routes and steps.
37bA, C, D correct; MnO₄⁻ is d⁰ and diamagnetic.
38aKMnO₄ is not a primary standard (always contains some MnO₂).
39bOxalic acid 1.0 mmol; MnO₄⁻ = 2/5 × 1.0 = 0.4 mmol; 0.4/20.0 = 0.02 M.
40c158/5 = 31.6; 158/3 = 52.7; 158/1 = 158.
41bAutocatalysis: product Mn²⁺ speeds the reaction.
42c2KMnO₄ → K₂MnO₄ + MnO₂ + O₂ gives oxygen.
43a3.16/158 = 0.02 mol KMnO₄ → 0.01 mol O₂ = 0.32 g.
44d5 × 0.012 = 0.06 mol e⁻; FeC₂O₄ gives 3 e⁻; 0.06/3 = 0.02 mol.
45a3 : 8 ratio; 0.3 × 8/3 = 0.8 mol MnO₂.
22 min left
‹
›