Chapter 3 of 11 · 22 min read

Chapter 1: Position, Configuration and General Characteristics of Transition Elements

What you will learn

  • Where the d-block sits in the periodic table and how its four series are arranged.

  • The IUPAC definition of a transition element, and why Zn, Cd and Hg fall outside it.

  • How to write the electronic configuration of 3d atoms and their ions, including the Cr and Cu exceptions.

  • Where transition metals occur in nature and the main ores asked in NEET.

  • The list of general characteristics that the rest of this book explains one by one.

1.1 Position in the periodic table

The d-block is the wide middle part of the periodic table. It covers groups 3 to 12. In these elements, the last electron enters a d orbital of the penultimate shell, that is the (n−1)d subshell.

There are four rows, called transition series:

SeriesSubshell being filledElementsPeriod
First (3d)3dSc (21) to Zn (30)4
Second (4d)4dY (39) to Cd (48)5
Third (5d)5dLa (57), then Hf (72) to Hg (80)6
Fourth (6d)6dAc (89), then Rf (104) to Cn (112)7

The third and fourth series are "broken". After La, fourteen 4f elements (Ce to Lu) are inserted before Hf. After Ac, fourteen 5f elements (Th to Lr) come before Rf. These inserted rows are the f-block (Chapter 7).

The name "transition" is old. These elements sit between the very reactive s-block metals on the left and the p-block on the right. Their properties change gradually across the row, a "transition" between the two blocks.

1.2 What counts as a transition element

The IUPAC definition is simple:

A transition element is one that has an incompletely filled d subshell either in its neutral atom or in any of its common oxidation states.

Apply it carefully.

  • Sc (3d¹ 4s²): the atom has one d electron. It is a transition element, though Sc³⁺ is d⁰.

  • Cu (3d¹⁰ 4s¹): the atom has a full 3d set. But Cu²⁺, its most common state, is 3d⁹. So Cu qualifies.

  • Ag and Au: same logic. Ag²⁺ is 4d⁹ and Au³⁺ is 5d⁸. Both qualify.

  • Zn, Cd, Hg (group 12): the atom is d¹⁰ and the only common ion, M²⁺, is also d¹⁰. They never have a partly filled d subshell, so they are not transition elements. They are still called d-block elements because the last electron enters the d set.

So every transition element is a d-block element, but not every d-block element is a transition element.

1.3 General electronic configuration

The general outer configuration of d-block elements is:

(n−1)d1−10 ns1−2(n-1)d^{1-10}\, ns^{1-2}

Pd is the one well-known exception to this pattern: it is 4d¹⁰ 5s⁰.

The (n−1)d and ns orbitals are very close in energy. A small change, such as extra exchange energy, can shift one electron between them. This is why the configuration does not always follow simple filling.

Configurations of the 3d series

ElementZOuter configurationUnpaired electrons (atom)
Sc213d¹ 4s²1
Ti223d² 4s²2
V233d³ 4s²3
Cr243d⁵ 4s¹6
Mn253d⁵ 4s²5
Fe263d⁶ 4s²4
Co273d⁷ 4s²3
Ni283d⁸ 4s²2
Cu293d¹⁰ 4s¹1
Zn303d¹⁰ 4s²0

All configurations above follow [Ar], that is 1s² 2s² 2p⁶ 3s² 3p⁶.

1.4 The Cr and Cu exceptions

By simple Aufbau filling, Cr should be 3d⁴ 4s² and Cu should be 3d⁹ 4s². Instead, one 4s electron moves into 3d.

The reason is exchange energy. Electrons with parallel spins in degenerate orbitals can swap places. Each such swap releases a little energy. A half-filled (d⁵) or full (d¹⁰) set has the most possible exchanges and a symmetrical charge cloud.

Think of five friends in five auto-rickshaws, one each, all facing the same way. That arrangement is calm and stable. Squeezing two into one auto while leaving another empty is less comfortable.

For Cr, 3d⁵ 4s¹ gives six parallel spins. For Cu, 3d¹⁰ 4s¹ gives a full, symmetrical d set. The small 3d–4s energy gap is easily paid back.

Other series have their own exceptions. A few that appear in MCQs:

ElementExpectedActual
Nb (41)4d³ 5s²4d⁴ 5s¹
Mo (42)4d⁴ 5s²4d⁵ 5s¹
Pd (46)4d⁸ 5s²4d¹⁰ 5s⁰
Ag (47)4d⁹ 5s²4d¹⁰ 5s¹
Pt (78)5d⁸ 6s²5d⁹ 6s¹
Au (79)5d⁹ 6s²5d¹⁰ 6s¹

You do not need to explain Nb or Pt. Just recognise them.

1.5 Configurations of ions

The 4s orbital fills before 3d. But once 3d starts filling, 4s ends up slightly higher in energy. So when a 3d atom forms a cation, it loses its 4s electrons first, then 3d electrons.

Rule: write the atom's configuration, remove ns electrons first, then (n−1)d electrons.

  • Fe (3d⁶ 4s²) → Fe²⁺ (3d⁶) → Fe³⁺ (3d⁵)

  • Cr (3d⁵ 4s¹) → Cr³⁺ (3d³)

  • Cu (3d¹⁰ 4s¹) → Cu⁺ (3d¹⁰) → Cu²⁺ (3d⁹)

  • Mn (3d⁵ 4s²) → Mn²⁺ (3d⁵)

A quick check for any 3d ion: number of d electrons = (group number) − (charge). Fe is in group 8, so Fe³⁺ has 8 − 3 = 5 d electrons. This works for all 3d ions with charge +2 or more.

1.6 Occurrence

Transition metals are common in the Earth's crust. Iron is the most abundant transition metal and the fourth most abundant element in the crust. Titanium is also common, though hard to extract.

Most occur as oxides or sulphides. Hard metals like Fe, Cr and Ti usually occur as oxides. Softer metals near the end of the series, like Cu and Zn, are often found as sulphides.

MetalCommon oreFormula
FeHaematiteFe₂O₃
FeMagnetiteFe₃O₄
CrChromiteFeCr₂O₄ (FeO·Cr₂O₃)
MnPyrolusiteMnO₂
TiIlmeniteFeTiO₃
TiRutileTiO₂
CuCopper pyritesCuFeS₂
ZnZinc blendeZnS
HgCinnabarHgS

The two compounds of Chapters 5 and 6 start from these ores: K₂Cr₂O₇ from chromite and KMnO₄ from pyrolusite.

Silver, gold and platinum often occur native, that is as the free metal. They are noble metals with positive E° values.

1.7 General characteristics: the checklist

Transition metals share a set of features. The next three chapters explain each one.

  1. They are all metals: hard, lustrous, good conductors of heat and electricity.

  2. They have high melting and boiling points and high enthalpies of atomisation (Chapter 2).

  3. Their atomic radii change only slightly across a series (Chapter 2).

  4. They show variable oxidation states (Chapter 3).

  5. Many of their ions and compounds are coloured (Chapter 4).

  6. Many are paramagnetic (Chapter 4).

  7. They and their compounds are good catalysts (Chapter 4).

  8. They form many complex compounds (Chapter 4).

  9. They form interstitial compounds and alloys (Chapter 4).

All these features come from one source: the partly filled (n−1)d subshell. Those d electrons take part in metallic bonding, can be lost in varying numbers, absorb visible light and stay unpaired.

1.8 Why Zn, Cd and Hg are not typical

Group 12 metals have a full d¹⁰ set in the atom and in M²⁺. Their d electrons are tucked in and do not take part in bonding. So they miss most of the checklist.

PropertyTypical transition metal (e.g. Fe)Zn, Cd, Hg
d configuration in common ionPartly filled (Fe²⁺ d⁶, Fe³⁺ d⁵)d¹⁰ (Zn²⁺)
Melting pointHigh (Fe 1811 K)Low (Zn 693 K, Hg is a liquid)
HardnessHardSoft
Oxidation statesSeveralMainly +2 (Hg also +1 as Hg₂²⁺)
Colour of compoundsUsually colouredUsually white or colourless
Magnetic behaviourOften paramagneticDiamagnetic
Enthalpy of atomisationHighLowest in each series

Hg is the only metal that is liquid at room temperature. Its metallic bonding is the weakest of all d-block metals.

Note: ZnO turns yellow on heating and HgI₂ is red, but these colours do not come from d–d transitions. They come from lattice defects or charge transfer.

1.9 Worked examples

Worked example 1.1: Write the electronic configurations of Mn (Z = 25) and Mn²⁺.

Solution: Mn has 25 electrons: [Ar] 3d⁵ 4s². To form Mn²⁺, remove the two 4s electrons first. Mn²⁺ is [Ar] 3d⁵. It has five unpaired electrons, a half-filled set.

Worked example 1.2: Which of these ions has a partly filled d subshell: Sc³⁺, Ti⁴⁺, Cu²⁺, Zn²⁺?

Solution: Use d electrons = group − charge. Sc³⁺: 3 − 3 = 0. Ti⁴⁺: 4 − 4 = 0. Cu²⁺: 11 − 2 = 9. Zn²⁺: 12 − 2 = 10. Only Cu²⁺ (3d⁹) is partly filled.

Worked example 1.3: Copper atom has a full 3d set, yet copper is a transition element. Zinc also has a full 3d set but is not. Explain.

Solution: The definition allows the partly filled d set to appear in a common oxidation state. Copper's common state +2 is 3d⁹, so it qualifies. Zinc's only common state +2 is 3d¹⁰, and the atom is also 3d¹⁰. Zinc never has a partly filled d set.

Worked example 1.4: How many electrons with azimuthal quantum number l = 2 are present in a Cr atom?

Solution: l = 2 means d electrons. Cr is 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁵ 4s¹. The only d subshell is 3d with 5 electrons. Answer: 5.

Worked example 1.5: An ion M³⁺ of the first transition series has the configuration [Ar] 3d⁵. Identify M.

Solution: M³⁺ has 18 + 5 = 23 electrons. So M has 23 + 3 = 26 electrons. Z = 26 is iron. M³⁺ is Fe³⁺.

Worked example 1.6: Which two ions in this list are isoelectronic: Fe²⁺, Fe³⁺, Mn²⁺, Co²⁺?

Solution: Count electrons. Fe²⁺: 24. Fe³⁺: 23. Mn²⁺: 23. Co²⁺: 25. Fe³⁺ and Mn²⁺ both have 23 electrons, both [Ar] 3d⁵.

Worked example 1.7: How many elements of the 3d series have only one electron in the 4s orbital in the ground state?

Solution: Look for the exceptions. Cr (3d⁵ 4s¹) and Cu (3d¹⁰ 4s¹). All others are 4s². Answer: 2.

Worked example 1.8: For Co²⁺ (Z = 27), find the number of electrons in the shell with n = 3.

Solution: Co is [Ar] 3d⁷ 4s². Co²⁺ loses the two 4s electrons: 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁷. Shell n = 3 holds 3s² 3p⁶ 3d⁷, that is 2 + 6 + 7 = 15 electrons.

Quick revision

  • d-block = groups 3 to 12; four series: 3d (Sc–Zn), 4d (Y–Cd), 5d (La, Hf–Hg), 6d (Ac, Rf–Cn).

  • Transition element: partly filled d subshell in the atom or in a common oxidation state.

  • Zn, Cd, Hg are d-block but not transition elements; Cu, Ag, Au are transition elements.

  • General configuration (n−1)d¹⁻¹⁰ ns¹⁻²; Pd is 4d¹⁰ 5s⁰.

  • Cr = 3d⁵ 4s¹ and Cu = 3d¹⁰ 4s¹, due to extra exchange energy of half-filled and full sets.

  • Ions lose ns electrons before (n−1)d electrons; for 3d ions, d count = group − charge.

  • Iron is the most abundant transition metal; know the ores chromite FeCr₂O₄ and pyrolusite MnO₂.

NEET traps

  • Writing Fe²⁺ as [Ar] 3d⁴ 4s². The 4s electrons leave first, so Fe²⁺ is [Ar] 3d⁶.

  • Saying Cu is not a transition element because its atom is 3d¹⁰. Cu²⁺ is 3d⁹, which is enough.

  • Calling Zn a transition element because it is in the d-block. It is a d-block element, not a transition element.

  • Forgetting Pd has no 5s electron. Its configuration is [Kr] 4d¹⁰.

  • Using "group − charge" for Cu⁺ or neutral atoms of Cr and Cu. It works only for ions with charge +2 or more.

  • Counting unpaired electrons of Cr atom as 4. Cr is 3d⁵ 4s¹, so it has 6 unpaired electrons.

Practice MCQs: Chapter 1

Level 1: Concept check

1. The general outer electronic configuration of d-block elements is (a) ns² np¹⁻⁶ (b) (n−1)d¹⁻¹⁰ ns¹⁻² (c) (n−2)f¹⁻¹⁴ ns² (d) ns¹⁻² only

2. The ground-state configuration of chromium (Z = 24) is (a) [Ar] 3d⁴ 4s² (b) [Ar] 3d⁶ (c) [Ar] 3d⁵ 4s¹ (d) [Ar] 3d³ 4s² 4p¹

3. Which of these is not a transition element by the IUPAC definition? (a) Cu (b) Sc (c) Zn (d) Fe

4. How many elements are there in the first (3d) transition series, Sc to Zn? (a) 8 (b) 14 (c) 9 (d) 10

5. When iron forms Fe²⁺, the electrons removed come from (a) the 4s orbital (b) the 3d orbitals (c) one 4s and one 3d orbital (d) the 3p orbitals

6. The configuration of Cu⁺ is (a) [Ar] 3d⁹ 4s¹ (b) [Ar] 3d¹⁰ (c) [Ar] 3d⁸ 4s² (d) [Ar] 3d⁹

7. The most abundant transition metal in the Earth's crust is (a) iron (b) titanium (c) copper (d) manganese

8. The formula of chromite ore is (a) Cr₂O₃ (b) PbCrO₄ (c) K₂CrO₄ (d) FeCr₂O₄

9. Which ion has a d⁰ configuration? (a) Ti³⁺ (b) Sc³⁺ (c) V³⁺ (d) Cu⁺

10. The only metal that is a liquid at room temperature is (a) zinc (b) cadmium (c) mercury (d) copper

Level 2: NEET standard

11. Which ion is isoelectronic with Mn²⁺? (a) Fe²⁺ (b) Co³⁺ (c) Cr²⁺ (d) Fe³⁺

12. The number of electrons with l = 2 in a copper atom is (a) 9 (b) 10 (c) 11 (d) 20

13. Which statement about zinc is correct? (a) Zn²⁺ salts are usually deeply coloured (b) Zinc commonly shows +1 and +2 states (c) Zinc has the lowest enthalpy of atomisation in the 3d series (d) Zinc metal is paramagnetic

14. Which element of the 4d series has an anomalous configuration with one electron in 5s? (a) Zr (b) Mo (c) Tc (d) Cd

15. The ground-state configuration of palladium (Z = 46) is (a) [Kr] 4d⁸ 5s² (b) [Kr] 4d⁹ 5s¹ (c) [Kr] 4d¹⁰ (d) [Kr] 4d¹⁰ 5s²

16. Copper is counted as a transition element because (a) Cu²⁺ has a 3d⁹ configuration (b) the Cu atom is 3d⁹ 4s² (c) copper shows only the +1 state (d) copper has two 4s electrons

17. The M³⁺ ion of which element has the configuration [Ar] 3d³? (a) V (b) Mn (c) Cr (d) Fe

18. The number of unpaired electrons in a ground-state iron atom is (a) 2 (b) 6 (c) 5 (d) 4

19. All the elements of which group are d-block elements but not transition elements? (a) Group 3 (b) Group 11 (c) Group 10 (d) Group 12

20. Which pair has the same number of d electrons? (a) Ti³⁺ and V⁴⁺ (b) Cr³⁺ and Mn³⁺ (c) Fe²⁺ and Co²⁺ (d) Cu⁺ and Ni²⁺

21. The fourth (6d) transition series begins with (a) La (b) Ac (c) Th (d) Rf

22. The formula of copper pyrites is (a) CuFeS₂ (b) Cu₂S (c) Cu₂O (d) CuCO₃·Cu(OH)₂

Level 3: Challenge

23. An M²⁺ ion of the 3d series and the M³⁺ ion of the next element both have five unpaired electrons. The pair is (a) Fe²⁺ and Co³⁺ (b) V²⁺ and Cr³⁺ (c) Cr²⁺ and Mn³⁺ (d) Mn²⁺ and Fe³⁺

24. The total number of 4s electrons in ground-state atoms of Cr, Mn, Cu and Zn taken together is (a) 8 (b) 6 (c) 4 (d) 7

25. How many of these are transition elements by the IUPAC definition: Sc, Ti, Cu, Zn, Ag, Cd, Au, Hg? (a) 4 (b) 6 (c) 5 (d) 8

26. Which ion has the largest number of 3d electrons? (a) Cu⁺ (b) Ni²⁺ (c) Co²⁺ (d) Fe³⁺

27. Element X has Z = 27. The number of electrons in the n = 3 shell of X²⁺ is (a) 17 (b) 15 (c) 16 (d) 13

28. Mercury has a very low melting point because (a) it forms strong covalent Hg–Hg bonds (b) its 5d electrons take a large part in metallic bonding (c) its filled 5d¹⁰ 6s² set supplies few electrons for metallic bonding, so bonding is weak (d) its atomic radius is very small

29. Assertion (A): Zinc is not regarded as a transition element. Reason (R): Zinc has a completely filled 3d subshell both in the atom and in the Zn²⁺ ion. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: The 4d transition series has ten elements, from Y to Cd. Statement II: Palladium has two electrons in its 5s orbital in the ground state. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bLast electron enters (n−1)d; outer s holds 1 or 2.
2cHalf-filled 3d⁵ gains exchange energy.
3cZn and Zn²⁺ are both 3d¹⁰.
4dZ = 21 to 30.
5a4s electrons leave before 3d.
6bCu (3d¹⁰ 4s¹) loses its 4s electron.
7aIron is fourth most abundant element overall.
8dChromite is FeO·Cr₂O₃.
9b3 − 3 = 0 d electrons.
10cHg has the weakest metallic bonding.
11dBoth have 23 electrons (3d⁵).
12bOnly 3d holds d electrons: 3d¹⁰.
13cZn has no unpaired d electrons for bonding (126 kJ/mol).
14bMo is 4d⁵ 5s¹.
15cPd is 4d¹⁰ 5s⁰.
16aA common oxidation state with partly filled d is enough.
17cCr³⁺ has 24 − 3 = 21 electrons = [Ar] 3d³.
18d3d⁶: one pair plus four single electrons.
19dZn, Cd, Hg are d¹⁰ in atom and ion.
20aBoth are d¹.
21bAc (89) is the first 6d element.
22aCopper pyrites is CuFeS₂.
23dMn²⁺ and Fe³⁺ are both 3d⁵.
24b1 + 2 + 1 + 2 = 6.
25cSc, Ti, Cu, Ag, Au.
26aCu⁺ is 3d¹⁰.
27b3s² 3p⁶ 3d⁷ = 15.
28cFew electrons in metallic bonding means weak bonding.
29aFull d set in atom and ion is exactly why Zn is excluded.
30cPd is 4d¹⁰ 5s⁰, so II is false.

Chapter 1 revision sheet

One-page summary

  • d-block = groups 3–12, between the s-block and p-block; electrons enter the (n−1)d subshell.

  • Four series: 3d (Sc–Zn, Z = 21–30), 4d (Y–Cd, Z = 39–48), 5d (La, Hf–Hg), 6d (Ac, Rf–Cn).

  • f-block (lanthanoids Ce–Lu, actinoids Th–Lr) is placed separately below the main table.

  • IUPAC definition: a transition element has an incompletely filled d subshell in the atom or in any of its common ions.

  • Zn, Cd, Hg have d¹⁰ in the atom and in their common ions, so they are d-block but not transition elements.

  • Cu, Ag, Au count as transition elements because Cu²⁺ (3d⁹), Ag²⁺ (4d⁹) and Au³⁺ (5d⁸) have incomplete d sets.

  • General configuration: (n−1)d¹⁻¹⁰ ns¹⁻²; Pd is the odd one with 4d¹⁰ 5s⁰.

  • Cr = [Ar]3d⁵ 4s¹ and Cu = [Ar]3d¹⁰ 4s¹, because half-filled and full d sets gain extra exchange energy.

  • 4s fills before 3d, but 4s electrons are removed first when ions form.

  • For a 3d ion: d electrons = group number − charge (Co²⁺: 9 − 2 = 7).

  • Iron is the most abundant transition metal; common ores: haematite Fe₂O₃, magnetite Fe₃O₄, chromite FeCr₂O₄, pyrolusite MnO₂, copper pyrites CuFeS₂.

  • General characteristics: high melting points, variable oxidation states, coloured ions, paramagnetism, catalytic activity, complex formation, interstitial compounds, alloys.

  • Hg is the only metal that is liquid at room temperature; group 12 metals are soft with low melting points.

Must-remember table

SpeciesConfigurationd electronsNote
Sc[Ar]3d¹ 4s²1Only +3 (d⁰ ion)
Cr[Ar]3d⁵ 4s¹5Exception
Mn²⁺[Ar]3d⁵5Half-filled, stable
Fe³⁺[Ar]3d⁵5Isoelectronic with Mn²⁺
Cu[Ar]3d¹⁰ 4s¹10Exception; Cu²⁺ is 3d⁹
Zn²⁺[Ar]3d¹⁰10Not a transition ion
Pd[Kr]4d¹⁰ 5s⁰10No 5s electron

Memory aids

  • "The two Cs cheat" – Cr and Cu each pull one 4s electron into 3d (3d⁵ 4s¹ and 3d¹⁰ 4s¹).

  • "4s: First In, First Out" – 4s is filled first in the atom and emptied first in the ion.

  • "ZCH: Zero Change, Hence not transition" – Zn, Cd, Hg keep d¹⁰ in atom and ion.

  • "Group minus charge" – d count of any 3d ion = group number − ionic charge.

  • "Pd Parks its s electron" – Pd holds all ten in 4d and leaves 5s empty.

Concept connections

  • Aufbau order, exchange energy and quantum numbers come from Chemistry Book 2: Atomic Structure.

  • Placement of blocks and periodic trends link to Chemistry Book 9: Classification of Elements and Periodicity in Properties.

  • Complex formation is developed fully in Chemistry Book 12: Coordination Compounds.

Practice MCQs: Chapter 1, Level 4 (new NEET pattern)

31. Match List I (species) with List II (ground-state configuration).

  • List I: A. Cr B. Cu C. Mn²⁺ D. Pd

  • List II: (i) [Kr]4d¹⁰ (ii) [Ar]3d⁵ 4s¹ (iii) [Ar]3d⁵ (iv) [Ar]3d¹⁰ 4s¹

(a) A-ii, B-iv, C-i, D-iii (b) A-iii, B-iv, C-ii, D-i (c) A-ii, B-iv, C-iii, D-i (d) A-iv, B-ii, C-iii, D-i

32. Match List I (ore) with List II (formula).

  • List I: A. Chromite B. Pyrolusite C. Haematite D. Malachite

  • List II: (i) MnO₂ (ii) CuCO₃·Cu(OH)₂ (iii) FeCr₂O₄ (iv) Fe₂O₃

(a) A-iii, B-i, C-iv, D-ii (b) A-i, B-iii, C-iv, D-ii (c) A-iii, B-i, C-ii, D-iv (d) A-iv, B-i, C-iii, D-ii

33. Match List I (ion) with List II (number of 3d electrons).

  • List I: A. Ti³⁺ B. Cr³⁺ C. Fe²⁺ D. Cu²⁺

  • List II: (i) 9 (ii) 3 (iii) 1 (iv) 6

(a) A-i, B-ii, C-iv, D-iii (b) A-iii, B-iv, C-ii, D-i (c) A-ii, B-iii, C-iv, D-i (d) A-iii, B-ii, C-iv, D-i

34. Match List I (element) with List II (description).

  • List I: A. Zn B. Sc C. Cu D. Ce

  • List II: (i) inner transition element (ii) transition element because its common +2 ion is d⁹ (iii) d-block element but not a transition element (iv) transition element whose only common ion is d⁰

(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-ii, C-iv, D-i (d) A-i, B-iv, C-ii, D-iii

35. How many of the following statements are correct?

  • A. Every d-block element is a transition element.

  • B. When iron forms Fe²⁺, it loses its 4s electrons first.

  • C. Mercury is a liquid at room temperature.

  • D. Ti, V, Cr and Mn all have two 4s electrons in the ground state.

(a) 1 (b) 2 (c) 3 (d) 4

36. Choose the correct set of statements.

  • A. Lanthanum is counted in the 5d series.

  • B. Groups 3 to 12 make up the d-block.

  • C. Pd has the configuration [Kr]4d⁸ 5s².

  • D. The 4d series begins with yttrium.

(a) A and B only (b) B, C and D only (c) A, B and D only (d) A, C and D only

37. How many of the following statements are correct?

  • A. Mn²⁺ is a d⁵ ion.

  • B. Fe³⁺ is a d⁵ ion.

  • C. Cr⁺ is a d⁵ ion.

  • D. Co³⁺ is a d⁵ ion.

  • E. V²⁺ is a d⁵ ion.

(a) 2 (b) 4 (c) 5 (d) 3

38. Choose the correct set of statements about copper.

  • A. The Cu atom has a full 3d subshell, yet copper is a transition element.

  • B. Cu²⁺ has the configuration [Ar]3d⁹.

  • C. Cu⁺ is coloured because it has d electrons.

  • D. Cu⁺ and Zn²⁺ are isoelectronic.

(a) A, B and D only (b) A and C only (c) B, C and D only (d) A, B, C and D

39. The table gives the atom and common-ion configurations of four 3d elements P, Q, R and S.

ElementAtomCommon ion
P3d¹ 4s²3d⁰ (+3)
Q3d¹⁰ 4s²3d¹⁰ (+2)
R3d¹⁰ 4s¹3d⁹ (+2)
S3d⁵ 4s²3d⁵ (+2)

Which of them is NOT a transition element by the IUPAC definition? (a) P (b) R (c) S (d) Q

40. A student plots the number of unpaired electrons in ground-state atoms from Sc to Zn. The values are: Sc 1, Ti 2, V 3, Cr 6, Mn 5, Fe 4, Co 3, Ni 2, Cu 1, Zn 0. Which statement explains the peak? (a) Mn, because it is 3d⁵ 4s² (b) Cr, because one 4s electron shifts to give 3d⁵ 4s¹ (c) Fe, because it is d⁶ (d) Cr, because it is 3d⁶ 4s⁰

41. A table lists the number of ns electrons in four ground-state atoms: V = 2, Cr = 1, Pd = 0, Zn = 1. Which entry is wrong? (a) V (b) Cr (c) Pd (d) Zn

Passage for Q42–43: A lab assistant finds two unlabelled sulfate salts of fourth-period metals. Salt X is blue; its metal ion M²⁺ has nine 3d electrons. Salt Y is white; its metal ion N²⁺ has 28 electrons in total and a full 3d set.

42. Metal M is (a) Ni (b) Co (c) Cu (d) Zn

43. Which statement about M and N is correct? (a) Both are transition elements (b) M is a transition element but N is not (c) N is a transition element but M is not (d) Neither is a transition element

44. An ion M³⁺ of a 3d metal has 23 electrons. Identify M and the number of unpaired electrons in M³⁺. (a) Fe, 5 (b) Mn, 4 (c) Co, 4 (d) Fe, 4

45. How many electrons in a ground-state Cr atom have n + l = 5? (a) 5 (b) 6 (c) 4 (d) 1

Level 4 answer key

QAnsReason
31cCr 3d⁵4s¹, Cu 3d¹⁰4s¹, Mn²⁺ 3d⁵, Pd 4d¹⁰ 5s⁰.
32aChromite FeCr₂O₄, pyrolusite MnO₂, haematite Fe₂O₃, malachite CuCO₃·Cu(OH)₂.
33dGroup − charge: Ti³⁺ 1, Cr³⁺ 3, Fe²⁺ 6, Cu²⁺ 9.
34bZn d¹⁰ always; Sc³⁺ d⁰; Cu²⁺ d⁹; Ce is a lanthanoid.
35bB and C correct; Zn, Cd, Hg are not transition elements, and Cr has one 4s electron.
36cPd is [Kr]4d¹⁰ 5s⁰, so C is false.
37dMn²⁺, Fe³⁺ and Cr⁺ (from 3d⁵4s¹) are d⁵; Co³⁺ is d⁶, V²⁺ is d³.
38aCu⁺ is d¹⁰ and colourless; both Cu⁺ and Zn²⁺ have 28 electrons.
39dQ (Zn) has d¹⁰ in atom and ion; P (Sc) has d¹ in the atom.
40bCr 3d⁵4s¹ has 5 + 1 = 6 unpaired electrons.
41dZn is 3d¹⁰ 4s², so it has 2 ns electrons.
42c3d⁹ in M²⁺ means M has 29 electrons: Cu.
43bCu²⁺ is d⁹ (transition); N²⁺ with 28 electrons is Zn²⁺, d¹⁰.
44a23 + 3 = 26 → Fe; Fe³⁺ is 3d⁵ with 5 unpaired.
45an + l = 5 fits 3d, 4p, 5s; Cr has only five 3d electrons among these.
22 min left
‹
›