Chapter 8 of 9 · 6 min read

Unit Test: Physics and Measurement

30 mixed questions at NEET level. Time: 35 minutes. Marking: +4 for correct, −1 for wrong.

1. If the units of force, length and time are 100 N, 10 m and 100 s, the unit of mass is: (a) 10³ kg (b) 10⁴ kg (c) 10⁵ kg (d) 10⁶ kg

2. Mass is measured with 2% error and speed with 3% error. The error in kinetic energy is: (a) 5% (b) 6% (c) 8% (d) 11%

3. The density of a cylinder is ρ = m/(πr²l). Errors in m, r and l are 1% each. The error in ρ is: (a) 3% (b) 4% (c) 2% (d) 1%

4. A screw gauge (pitch 1 mm, 100 divisions) has its circular zero above the reference line, with the 97th division coinciding. A wire gives MSR = 2 mm and CSR = 46. The diameter is: (a) 2.43 mm (b) 2.46 mm (c) 2.49 mm (d) 2.52 mm

5. In a vernier, 1 MSD = 0.5 mm and 25 VSD = 24 MSD. The least count is: (a) 0.01 mm (b) 0.02 mm (c) 0.05 mm (d) 0.2 mm

6. 0.0250 × 3.21, with correct significant figures, is: (a) 0.08 (b) 0.080 (c) 0.0802 (d) 0.08025

7. The dimensions of ½ε₀E² (E = electric field) are: (a) [M L² T⁻²] (b) [M L⁻¹ T⁻²] (c) [M L T⁻²] (d) [M L⁻² T⁻²]

8. L/R (inductance/resistance) has the same dimensions as: (a) RC (b) LC (c) R/C (d) 1/RC

9. Which quantity has dimensions different from the other three? (a) Torque (b) Work (c) Energy (d) Power

10. Velocity is given by v = At + B/(t + C), where t is time. The dimensions of B are: (a) [L T⁻²] (b) [L] (c) [T] (d) [L T⁻¹]

11. If the orbital period T of a planet depends on orbit radius R, G and the Sun's mass M, then T is proportional to: (a) R (b) R^(1/2) (c) R^(3/2) (d) R²

12. The frequency f of a stretched string depends on its length l, tension F and mass per unit length μ. Then f is proportional to: (a) l√(F/μ) (b) (1/l)√(F/μ) (c) (1/l)√(μ/F) (d) l²F/μ

13. If energy [E], velocity [V] and time [T] are base quantities, surface tension has dimensions: (a) [E V⁻² T⁻²] (b) [E V² T²] (c) [E V⁻¹ T⁻¹] (d) [E V⁻² T⁻¹]

14. The order of magnitude of 0.0035 is: (a) 10⁻⁴ (b) 10⁻³ (c) 10⁻² (d) 10⁻¹

15. Two resistors of (100 ± 3) Ω and (200 ± 4) Ω are joined in series. The total resistance is: (a) (300 ± 1) Ω (b) (300 ± 5) Ω (c) (300 ± 7) Ω (d) (300 ± 12) Ω

16. P = a³b²/(c d^(1/2)). Errors in a, b, c, d are 1%, 2%, 3%, 4%. The error in P is: (a) 10% (b) 12% (c) 14% (d) 7%

17. The radius of a sphere is (2.0 ± 0.1) cm. The percentage error in its volume is: (a) 5% (b) 10% (c) 15% (d) 3%

18. A stopwatch with least count 0.2 s gives 25 s for 20 oscillations. The percentage error in the time is: (a) 0.2% (b) 0.8% (c) 1% (d) 8%

19. For Q18, the percentage error in the period of one oscillation is: (a) 0.04% (b) 0.8% (c) 16% (d) 0.4%

20. One parsec is the distance at which: (a) light travels for one year (b) 1 AU subtends an angle of 1 second of arc (c) 1 AU subtends 1 degree (d) the Earth–Sun distance is 1 km

21. Which measurement is the most precise? (a) 4.0 cm (b) 4.00 mm (c) 4.00 m (d) 4.0 m

22. The dimensions of μ₀ε₀ are: (a) [L T⁻¹] (b) [L⁻¹ T] (c) [L² T⁻²] (d) [L⁻² T²]

23. One kilowatt hour is about: (a) 2.25 × 10²⁵ eV (b) 2.25 × 10¹⁹ eV (c) 5.76 × 10⁻¹³ eV (d) 3.6 × 10⁶ eV

24. One light year in astronomical units is about: (a) 6.3 × 10² AU (b) 6.3 × 10⁴ AU (c) 6.3 × 10⁶ AU (d) 2.1 × 10⁵ AU

25. In P + ½ρv² + ρgh = constant, the term ρgh has the dimensions of: (a) energy (b) force (c) pressure (d) momentum

26. A period is measured as 1.20 s, 1.22 s, 1.18 s and 1.20 s. The percentage error is about: (a) 0.08% (b) 0.8% (c) 1.7% (d) 8%

27. 9.875 rounded to 3 significant figures is: (a) 9.87 (b) 9.88 (c) 9.9 (d) 9.86

28. 3.45 m + 2.1 m, with correct significant figures, is: (a) 5.55 m (b) 5.5 m (c) 5.6 m (d) 6 m

29. Assertion (A): A screw gauge with pitch 0.5 mm and 50 circular divisions has a least count of 0.01 mm. Reason (R): Least count = pitch / number of circular divisions. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: In a given experiment, a systematic error always has the same sign. Statement II: The SI unit of temperature is the degree Celsius. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1cM = F T²/L = 100 × 10⁴ / 10 = 10⁵ kg.
2cK = ½mv²: 2% + 2 × 3%.
3b1% + 2 × 1% + 1%.
4cZero error −0.03 mm; 2.46 + 0.03.
5b0.5 mm / 25.
6c3 figures: 0.08025 → 0.0802 (dropped digit is exactly 5 and the previous 2 is even, so it stays).
7bEnergy per volume = pressure dimensions.
8aBoth are time constants, [T].
9dPower is [M L² T⁻³].
10bB/(t + C) is a velocity, t + C is a time, so B is velocity × time.
11cEquating powers: T ∝ R^(3/2) (GM)^(−1/2). Kepler's third law.
12b√(F/μ) is a speed; dividing by length gives frequency.
13aS = E/L² and L = VT.
14c3.5 × 10⁻³ and 3.5 > 3.16.
15cAbsolute errors add.
16b3 + 4 + 3 + 2.
17cΔR/R = 5%; × 3.
18b0.2/25 × 100.
19bDividing by an exact 20 keeps the percentage.
20bDefinition of the parsec.
21bIts least count is 0.01 mm, the finest.
22dμ₀ε₀ = 1/c².
23a3.6 × 10⁶ / 1.6 × 10⁻¹⁹.
24b9.46 × 10¹⁵ / 1.496 × 10¹¹.
25cEach term is added to P.
26bMean 1.20 s, mean absolute error 0.01 s.
27bDropped 5 exactly; previous 7 is odd, so raise.
28cOne decimal place; 5.55 → previous 5 is odd, so raise.
29a0.5/50 = 0.01 mm by that rule.
30cThe SI unit is the kelvin.
6 min left
‹
›
Unit Test: Physics and | NEET Physics Book 1: Physics and…