Chapter 4: Significant Figures
What you will learn
What significant figures tell us about a measurement
The rules for counting them, including the tricky zeros
How to keep the right number of figures after adding, multiplying or dividing
How to round off correctly, including the "exactly 5" case
Scientific notation and order of magnitude
4.1 What significant figures mean
When you write a length as 2.36 cm, you are saying the 2 and the 3 are certain and the 6 is your best estimate. The significant figures of a measurement are all the reliable digits plus the first uncertain digit.
So 2.36 cm has 3 significant figures. Writing 2.3600 cm would claim a precision the scale cannot give. More significant figures means a more precise measurement.
4.2 Rules for counting
| Rule | Example | Significant figures |
|---|---|---|
| All non-zero digits count | 2.457 | 4 |
| Zeros between non-zero digits count | 4005 | 4 |
| Leading zeros (before the first non-zero digit) don't count | 0.00305 | 3 |
| Trailing zeros after a decimal point count | 3.500 | 4 |
| Trailing zeros in a number with a decimal point count | 250. or 250.0 | 3 or 4 |
| Trailing zeros in a whole number without a decimal point are unclear | 4200 | 2, 3 or 4 |
The last row is why scientists use scientific notation. Write 4200 as 4.2 × 10³ (2 figures), 4.20 × 10³ (3) or 4.200 × 10³ (4), depending on what was actually measured.
Two more rules:
Changing units doesn't change significant figures. 2.30 m = 230 cm = 2.30 × 10² cm = 2.30 × 10⁻³ km. All have 3 significant figures. The "0" in 230 cm is only clear when written as 2.30 × 10².
Exact numbers have unlimited significant figures. Counted values (5 students) and defined numbers (the 2 in 2πr, the 1/2 in ½mv²) never limit the result.
Worked example 4.1: Count the significant figures in 0.007050, 3.0800, 6.320 × 10⁴ and 0.0006.
Solution:
0.007050 → 7, 0, 5, 0 → 4.
3.0800 → 5.
6.320 × 10⁴ → 4. The power of ten does not count.
0.0006 → 1.
4.3 Scientific notation and order of magnitude
Any number can be written as a × 10ᵇ, where 1 ≤ a < 10 and b is an integer. The diameter of the Earth, 12 740 000 m, becomes 1.274 × 10⁷ m.
The order of magnitude is the power of ten closest to the number:
If a ≤ 3.16 (that is, √10), the order is 10ᵇ.
If a > 3.16, the order is 10ᵇ⁺¹.
So 2.5 × 10⁶ has order 10⁶, while 4.5 × 10⁷ has order 10⁸.
4.4 Arithmetic with significant figures
A result can never be more precise than the least precise measurement used to get it.
Rule A: Multiplication and division. Keep as many significant figures as the input with the fewest significant figures.
Worked example 4.2: A stone of mass 4.237 g has volume 2.51 cm³. Find its density.
Solution: 4.237 / 2.51 = 1.688… The volume has 3 significant figures, so density = 1.69 g/cm³.
Rule B: Addition and subtraction. Keep as many decimal places as the input with the fewest decimal places.
Worked example 4.3: Add 436.32 g, 227.2 g and 0.301 g.
Solution: The sum is 663.821 g. 227.2 has only one decimal place, so the answer is 663.8 g.
Notice the difference: in Rule A we count significant figures; in Rule B we count decimal places.
4.5 Rounding off
When dropping digits, look at the first digit being dropped:
More than 5: raise the previous digit by 1. 6.4372 → 6.44 (3 figures).
Less than 5: leave the previous digit as it is. 6.4328 → 6.43.
Exactly 5 (nothing after it, or only zeros):
If the previous digit is even, leave it: 2.745 → 2.74.
If the previous digit is odd, raise it by 1: 2.735 → 2.74.
This "round to even" rule spreads rounding errors evenly over many calculations.
In a long calculation, keep one extra digit in the middle steps and round only the final answer.
Worked example 4.4: The radius of a coin is 2.0 cm. Find its circumference.
Solution: 2πr = 2 × 3.14159 × 2.0 = 12.566 cm. The 2 and π are exact. The radius has 2 significant figures, so circumference = 13 cm.
Quick revision
Leading zeros: never significant. Zeros between digits: always. Trailing zeros after a decimal point: always.
Use scientific notation to remove doubt about trailing zeros.
Changing units does not change the count; exact numbers never limit it.
× and ÷: fewest significant figures. + and −: fewest decimal places.
Exactly 5: round to make the previous digit even.
Order of magnitude: compare a with 3.16.
NEET traps
Applying the significant-figure rule to an addition. For 2.0 + 3.21 + 0.005 = 5.215, the answer is 5.2 (one decimal place), not 5.22.
Counting the zeros in 0.00230 as significant. Only 2, 3 and the final 0 count.
Thinking 5.00 m and 500 cm are the same claim. Write 5.00 × 10² cm to keep 3 figures.
Rounding 2.745 to 2.75. With an even digit before the 5, it stays 2.74.
Practice MCQs: Chapter 4
1. The number of significant figures in 0.007050 is: (a) 3 (b) 4 (c) 6 (d) 7
2. The number of significant figures in 3.0800 is: (a) 3 (b) 4 (c) 5 (d) 2
3. The number of significant figures in 6.320 × 10⁴ is: (a) 3 (b) 4 (c) 5 (d) 8
4. The number of significant figures in 0.0006 is: (a) 1 (b) 4 (c) 5 (d) 0
5. 3.0 × 4.256, with correct significant figures, is: (a) 12.768 (b) 12.77 (c) 12.8 (d) 13
6. 12.11 + 18.0 + 1.013, with correct significant figures, is: (a) 31.123 (b) 31.12 (c) 31.1 (d) 31
7. 9.8 − 4.123, with correct significant figures, is: (a) 5.677 (b) 5.68 (c) 5.7 (d) 6
8. 2.745 rounded to 3 significant figures is: (a) 2.75 (b) 2.74 (c) 2.70 (d) 2.80
9. 2.735 rounded to 3 significant figures is: (a) 2.73 (b) 2.74 (c) 2.70 (d) 2.80
10. 6.4372 rounded to 3 significant figures is: (a) 6.43 (b) 6.44 (c) 6.40 (d) 6.4
11. A board is 2.5 m long and 1.25 m wide. Its area is: (a) 3.125 m² (b) 3.13 m² (c) 3.1 m² (d) 3 m²
12. A body has mass 5.74 g and volume 1.2 cm³. Its density is: (a) 4.783 g/cm³ (b) 4.78 g/cm³ (c) 4.8 g/cm³ (d) 5 g/cm³
13. 1.0 m expressed in mm with correct significant figures is: (a) 1000 mm (b) 1.0 × 10³ mm (c) 1.000 × 10³ mm (d) 10³ mm
14. The order of magnitude of 4.5 × 10⁷ is: (a) 10⁶ (b) 10⁷ (c) 10⁸ (d) 10⁹
15. The order of magnitude of 3 × 10⁸ m/s is: (a) 10⁷ (b) 10⁸ (c) 10⁹ (d) 10¹⁰
16. A wheel of radius 2.0 cm has a circumference of: (a) 12.566 cm (b) 12.57 cm (c) 12.6 cm (d) 13 cm
17. Which number has exactly 3 significant figures? (a) 0.00230 (b) 2300 (c) 0.023 (d) 2.0030
18. 5.00 m expressed in cm with correct significant figures is: (a) 500 cm (b) 5.00 × 10² cm (c) 5 × 10² cm (d) 500.0 cm
19. 2.0 + 3.21 + 0.005, with correct significant figures, is: (a) 5.215 (b) 5.22 (c) 5.2 (d) 5
20. A disc has diameter 1.80 cm. Its area is: (a) 2.5447 cm² (b) 2.54 cm² (c) 2.5 cm² (d) 10.2 cm²
21. A cube has side 1.2 × 10⁻² m. Its volume is: (a) 1.728 × 10⁻⁶ m³ (b) 1.73 × 10⁻⁶ m³ (c) 1.7 × 10⁻⁶ m³ (d) 2 × 10⁻⁶ m³
22. The trailing zeros in 1500 (no decimal point) are: (a) always significant (b) never significant (c) unclear without scientific notation (d) significant only in SI
23. Assertion (A): 0.0045 has two significant figures. Reason (R): Leading zeros only locate the decimal point. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
24. Statement I: Changing the unit of a measurement changes its number of significant figures. Statement II: Exact counted numbers have unlimited significant figures. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
25. (4.0 × 10²) ÷ 2.00, with correct significant figures, is: (a) 200 (b) 2.0 × 10² (c) 2.00 × 10² (d) 2 × 10²
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | b | 7, 0, 5, 0. Leading zeros do not count. |
| 2 | c | All five digits count. |
| 3 | b | 6, 3, 2, 0. |
| 4 | a | Only the 6. |
| 5 | d | 3.0 has 2 figures; 12.768 → 13. |
| 6 | c | 18.0 has one decimal place. |
| 7 | c | 9.8 has one decimal place. |
| 8 | b | Previous digit 4 is even: leave it. |
| 9 | b | Previous digit 3 is odd: raise it. |
| 10 | b | Dropped digit 7 > 5. |
| 11 | c | 2.5 has 2 figures. |
| 12 | c | 1.2 has 2 figures. |
| 13 | b | Keeps 2 figures. |
| 14 | c | 4.5 > 3.16. |
| 15 | b | 3 < 3.16. |
| 16 | d | Worked example 4.4. |
| 17 | a | 2, 3 and the final 0. |
| 18 | b | Keeps 3 figures. |
| 19 | c | 2.0 has one decimal place. |
| 20 | b | r = 0.900 cm; πr² = 2.5447 → 3 figures. |
| 21 | c | 1.2 has 2 figures; 1.728 → 1.7. |
| 22 | c | Scientific notation removes the doubt. |
| 23 | a | 4 and 5 are the only significant digits. |
| 24 | d | Units do not change it; counted numbers are exact. |
| 25 | b | 4.0 has 2 figures. |
Chapter 4 revision sheet
One-page summary
Significant figures = all the reliable digits plus the first uncertain digit.
Every non-zero digit is significant.
Zeros between non-zero digits are significant (1003 has 4).
Leading zeros are never significant (0.0045 has 2).
Trailing zeros after a decimal point are significant (2.500 has 4).
Trailing zeros in a whole number with no decimal point are doubtful (4200). Scientific notation settles it: 4.20 × 10³ has 3.
Changing units never changes the count: 3.20 m = 3.20 × 10³ mm, still 3.
Exact numbers (counted items, the 2 in 2πr) have unlimited significant figures and never limit a result.
Scientific notation: a × 10ᵇ with 1 ≤ a < 10.
Order of magnitude: b if a ≤ 3.16 (that is, √10), and b + 1 if a > 3.16.
Multiply or divide: keep the fewest significant figures among the inputs.
Add or subtract: keep the fewest decimal places among the inputs.
Rounding: drop a digit below 5; raise the previous digit for a digit above 5 (or 5 followed by non-zero digits).
Exactly 5: make the previous digit even (7.365 → 7.36, 7.375 → 7.38).
In long calculations keep one extra digit in each step and round only at the end.
Must-remember table
| Number | Significant figures | Rule used |
|---|---|---|
| 0.00720 | 3 | Leading zeros out, trailing zero after decimal in |
| 50.040 | 5 | Middle and trailing zeros count |
| 1003 | 4 | Zeros between digits count |
| 4200 | 2 to 4 (doubtful) | Write in scientific notation |
| 4.200 × 10³ | 4 | Every digit of a counts |
| 3.0 × 10⁸ | 2 | Power of ten does not count |
| 12 (students) | Unlimited | Exact count |
Memory aids
"Leaders lie, sandwiched zeros speak, tail after point talks": leading zeros never count, zeros between digits count, trailing zeros after the decimal point count.
"Times takes Total figures, Plus takes Places": × and ÷ follow significant figures; + and − follow decimal places.
"Five goes Even": an exact 5 rounds to leave an even digit.
"Root ten is the gate": compare a with 3.16 for order of magnitude.
"Counts are free": exact counts never limit significant figures.
Concept connections
Physics Book 20: Experimental Skills: every recorded reading and final answer must carry the right number of significant figures.
Chemistry Book 1: Some Basic Concepts in Chemistry uses the same significant-figure and rounding rules for molar mass and concentration problems.
Physics Book 6: Gravitation and Physics Book 18: Atoms and Nuclei use scientific notation and order of magnitude for very large and very small values.
Practice MCQs: Chapter 4, new NEET pattern (Q26–40)
26. Match each number in List I with its number of significant figures in List II.
List I:
A. 0.00720
B. 50.040
C. 3.0 × 10⁸
D. 1003
List II:
i. 4
ii. 2
iii. 5
iv. 3
(a) A-iii, B-iv, C-ii, D-i (b) A-iv, B-ii, C-iii, D-i (c) A-iv, B-iii, C-ii, D-i (d) A-ii, B-iii, C-iv, D-i
27. Match each number in List I with its value rounded to three significant figures in List II.
List I:
A. 7.365
B. 7.375
C. 7.3651
D. 7.344
List II:
i. 7.38
ii. 7.34
iii. 7.37
iv. 7.36
(a) A-iv, B-i, C-iii, D-ii (b) A-i, B-iv, C-iii, D-ii (c) A-iv, B-iii, C-i, D-ii (d) A-iii, B-i, C-iv, D-ii
28. Match each calculation in List I with its correctly reported result in List II. (In C, 3 is an exact count.)
List I:
A. 2.5 × 3.42
B. 12.6 + 0.234
C. 9.00 ÷ 3
D. 100.0 − 0.57
List II:
i. 12.8
ii. 99.4
iii. 8.6
iv. 3.00
(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-i, C-ii, D-iv (c) A-iv, B-i, C-iii, D-ii (d) A-iii, B-i, C-iv, D-ii
29. Match each number in List I with its order of magnitude in List II.
List I:
A. 2.9 × 10⁵
B. 4.0 × 10⁵
C. 0.0035
D. 3.0 × 10⁻³
List II:
i. −2
ii. 6
iii. −3
iv. 5
(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-iv, B-ii, C-iii, D-i (d) A-iv, B-i, C-ii, D-iii
30. How many of the following statements are correct?
A. 0.0300 has three significant figures.
B. 3.00 × 10⁻² and 0.0300 have the same number of significant figures.
C. 4500 written as 4.50 × 10³ has three significant figures.
D. The exact count 12 in "12 students" limits the significant figures of a result.
E. 3.20 m = 3.20 × 10³ mm, and both have three significant figures.
(a) Three (b) Four (c) Two (d) Five
31. A rectangular slab measures 4.234 m by 1.05 m. Choose the correct set of statements.
A. Its area is 4.45 m².
B. Its area is 4.4457 m².
C. Its perimeter is 10.57 m.
D. Its perimeter is 11 m.
(a) B and C only (b) A and D only (c) A and C only (d) B and D only
32. Choose the correct set of statements.
A. The trailing zeros in 6.400 are significant.
B. 0.05070 has four significant figures.
C. 8.335 rounded to three significant figures is 8.34.
D. 8.325 rounded to three significant figures is 8.33.
(a) A, B and C only (b) A and D only (c) B, C and D only (d) A, B, C and D
33. How many of the following statements are correct?
A. The order of magnitude of 3.2 × 10⁴ is 5.
B. The order of magnitude of the electron mass, 9.11 × 10⁻³¹ kg, is −30.
C. In a multi-step calculation, keep one extra digit in the middle steps.
D. A calculated result can be more precise than the least precise measured value used.
(a) One (b) Two (c) Four (d) Three
34. A pencil is measured with a metre scale of least count 1 mm. Four students record it as below.
| Student | Recorded length |
|---|---|
| P | 12 cm |
| Q | 12.0 cm |
| R | 12.00 cm |
| S | 12.000 cm |
Who has recorded it correctly?
(a) P (b) Q (c) R (d) S
35. A student finds the density of a stone from the data below.
| Quantity | Value | Instrument |
|---|---|---|
| Mass | 25.47 g | Electronic balance |
| Volume | 3.1 cm³ | Measuring cylinder |
The density should be reported as
(a) 8.216 g/cm³ (b) 8.22 g/cm³ (c) 8.2 g/cm³ (d) 8 g/cm³
36. The same mass is recorded four ways.
| Entry | Recorded mass |
|---|---|
| 1 | 0.0520 kg |
| 2 | 52.0 g |
| 3 | 5.20 × 10⁴ mg |
| 4 | 52000 mg |
In how many entries can we be sure there are exactly three significant figures?
(a) Four (b) Two (c) One (d) Three
Case for Q37–38: Priya times 20 oscillations of a simple pendulum with a stopwatch of least count 0.1 s and gets 39.8 s. She measures the length as 0.985 m. She then uses g = 4π²L/T².
37. The time period, with correct significant figures, is (a) 1.99 s (b) 2.0 s (c) 1.990 s (d) 2 s
38. The value of g she should report is (a) 9.8 m/s² (b) 9.819 m/s² (c) 9.82 m/s² (d) 10 m/s²
39. The value of (3.20 + 4.1) × 2.50, with correct significant figures, is (a) 18.3 (b) 18 (c) 18.25 (d) 18.2
40. A ball bearing has radius 0.50 cm. Its volume (4/3)πr³, with correct significant figures, is (a) 0.5236 cm³ (b) 0.524 cm³ (c) 0.5 cm³ (d) 0.52 cm³
Answer key (Q26–40)
| Q | Ans | Reason |
|---|---|---|
| 26 | c | 0.00720 has 3, 50.040 has 5, 3.0 × 10⁸ has 2, 1003 has 4 |
| 27 | a | Exact 5 after 6 stays 7.36; after 7 becomes 7.38; 7.3651 goes up; 7.344 goes down |
| 28 | d | 8.55 → 8.6 (2 s.f.); 12.834 → 12.8 (1 d.p.); 3.00 (exact 3); 99.43 → 99.4 |
| 29 | b | 2.9 is below 3.16 so 5; 4.0 above so 6; 3.5 × 10⁻³ gives −2; 3.0 × 10⁻³ gives −3 |
| 30 | b | A, B, C, E true; exact counts never limit |
| 31 | c | 4.4457 → 4.45 (3 s.f.); 10.568 → 10.57 (2 d.p.) |
| 32 | a | 8.325: exact 5 after even 2 stays 8.32, so D is false |
| 33 | d | A, B, C true; a result cannot beat its weakest input |
| 34 | b | LC 0.1 cm, so record to one decimal place in cm |
| 35 | c | 25.47/3.1 = 8.216; volume has 2 s.f., so 8.2 |
| 36 | d | Entries 1, 2, 3 clearly have 3; 52000 is doubtful |
| 37 | a | 39.8/20 = 1.99 s; 20 is an exact count |
| 38 | c | g = 9.8195, three inputs of 3 s.f., so 9.82 m/s² |
| 39 | b | 3.20 + 4.1 = 7.3 (1 d.p.); 7.3 × 2.50 = 18.25 → 18 (2 s.f.) |
| 40 | d | 0.5236 with r to 2 s.f. gives 0.52 cm³ |