Chapter 5: Dimensions and Dimensional Analysis
What you will learn
What the dimensions of a quantity are and how to write a dimensional formula
Dimensional formulae of the quantities NEET uses most
The principle of homogeneity
Three uses of dimensional analysis: checking equations, converting units, deriving relations
What dimensional analysis cannot do
5.1 What dimensions are
Every derived quantity is built from base quantities. Its dimensions are the powers to which the base quantities are raised.
We write base quantities in square brackets: [M] mass, [L] length, [T] time, [A] current, [K] temperature, [mol] amount of substance, [cd] luminous intensity.
Example: Force = mass × acceleration = mass × length / time². So the dimensional formula of force is [M L T⁻²]. Force has dimension 1 in mass, 1 in length and −2 in time.
An equation like [F] = [M L T⁻²] is a dimensional equation.
5.2 Dimensional formulae to know
Mechanics
| Quantity | Formula used | Dimensions |
|---|---|---|
| Velocity, speed | distance/time | [L T⁻¹] |
| Acceleration | velocity/time | [L T⁻²] |
| Force | ma | [M L T⁻²] |
| Momentum, impulse | mv, Ft | [M L T⁻¹] |
| Work, energy, torque | Fd, Fr | [M L² T⁻²] |
| Power | work/time | [M L² T⁻³] |
| Pressure, stress, Young's modulus | F/A | [M L⁻¹ T⁻²] |
| Strain, angle, refractive index | ratio | dimensionless |
| Density | m/V | [M L⁻³] |
| Frequency, angular velocity | 1/T, θ/t | [T⁻¹] |
| Moment of inertia | mr² | [M L²] |
| Angular momentum, Planck constant h | mvr, E/f | [M L² T⁻¹] |
| Gravitational constant G | Fr²/m₁m₂ | [M⁻¹ L³ T⁻²] |
| Spring constant, surface tension | F/x, F/l | [M T⁻²] |
| Coefficient of viscosity η | F/(A dv/dx) | [M L⁻¹ T⁻¹] |
Heat and thermodynamics
| Quantity | Formula used | Dimensions |
|---|---|---|
| Specific heat capacity | Q/(mΔT) | [L² T⁻² K⁻¹] |
| Latent heat | Q/m | [L² T⁻²] |
| Gas constant R | PV/(nT) | [M L² T⁻² K⁻¹ mol⁻¹] |
| Boltzmann constant k | E/T | [M L² T⁻² K⁻¹] |
| Thermal conductivity | Q d/(A ΔT t) | [M L T⁻³ K⁻¹] |
| Stefan constant σ | E/(A t T⁴) | [M T⁻³ K⁻⁴] |
Electricity and magnetism
| Quantity | Formula used | Dimensions |
|---|---|---|
| Charge | It | [A T] |
| Potential difference, EMF | W/q | [M L² T⁻³ A⁻¹] |
| Resistance | V/I | [M L² T⁻³ A⁻²] |
| Capacitance | q/V | [M⁻¹ L⁻² T⁴ A²] |
| Permittivity ε₀ | q²/(4πFr²) | [M⁻¹ L⁻³ T⁴ A²] |
| Magnetic field B | F/(qv) | [M T⁻² A⁻¹] |
| Magnetic flux | BA | [M L² T⁻² A⁻¹] |
| Inductance | flux/I | [M L² T⁻² A⁻²] |
| Permeability μ₀ | from B = μ₀I/2πr | [M L T⁻² A⁻²] |
Useful combinations
√(l/g), RC, L/R, √(LC) all have the dimensions of time, [T].
1/√(μ₀ε₀) and E/B both have the dimensions of velocity, [L T⁻¹].
Worked example 5.1: Find the dimensions of the Planck constant from E = hf.
Solution: h = E/f = [M L² T⁻²]/[T⁻¹] = [M L² T⁻¹]. These are also the dimensions of angular momentum.
5.3 The principle of homogeneity
You can only add, subtract or equate quantities with the same dimensions. You cannot add 5 kg to 3 m. So every term in a correct physical equation must have the same dimensions.
Also, the argument of sin, cos, tan, eˣ and log must be dimensionless. In x = A sin(ωt), ωt has no dimensions, so ω has the dimensions [T⁻¹].
5.4 Uses of dimensional analysis
Use 1: Checking whether an equation can be right.
Worked example 5.2: Check v² = u² + 2as.
Solution: [v²] = [L² T⁻²]. [u²] = [L² T⁻²]. [2as] = [L T⁻²][L] = [L² T⁻²]. All terms match, so the equation is dimensionally correct.
A dimensionally correct equation may still be wrong by a number. v² = u² + as passes this test but is physically wrong.
Use 2: Converting units between systems. This is the n₂ = n₁[M₁/M₂]ᵃ[L₁/L₂]ᵇ[T₁/T₂]ᶜ method from Section 1.10.
Use 3: Deriving a relation between quantities.
Worked example 5.3: The period T of a simple pendulum may depend on the bob's mass m, the string length l and g. Find the relation.
Solution: Let T = k mᵃ lᵇ gᶜ, where k is a dimensionless constant.
[T] = [M]ᵃ [L]ᵇ [L T⁻²]ᶜ = [Mᵃ Lᵇ⁺ᶜ T⁻²ᶜ]
Compare powers:
M: a = 0
T: −2c = 1, so c = −1/2
L: b + c = 0, so b = 1/2
So T = k √(l/g). The period does not depend on the mass. (Experiment gives k = 2π.)
Worked example 5.4: The drag force F on a small sphere falling through a liquid depends on the viscosity η, the radius r and the speed v. Find the relation.
Solution: F = k ηᵃ rᵇ vᶜ.
[M L T⁻²] = [M L⁻¹ T⁻¹]ᵃ [L]ᵇ [L T⁻¹]ᶜ
M: a = 1
T: −a − c = −2, so c = 1
L: −a + b + c = 1, so b = 1
So F = k η r v. (Experiment gives k = 6π, which is Stokes' law.)
Worked example 5.5: Finding the dimensions of constants. In the van der Waals equation (P + a/V²)(V − b) = RT, find the dimensions of a and b.
Solution: a/V² must have the dimensions of pressure, so a = PV² = [M L⁻¹ T⁻²][L⁶] = [M L⁵ T⁻²]. b must have the dimensions of volume, so b = [L³].
Worked example 5.6: A new set of base quantities. If velocity [V], time [T] and force [F] are taken as base quantities, find the dimensions of mass.
Solution: F = ma = m × V/T. So m = F T / V, and mass has dimensions [F V⁻¹ T].
5.5 Limitations
It cannot find dimensionless constants such as 2π, ½ or 6π.
It cannot derive equations that are a sum of terms, such as s = ut + ½at².
It cannot handle trigonometric, exponential or log relations.
In mechanics it can find a relation with at most three unknown powers, because there are only three base dimensions (M, L, T) to compare.
It cannot tell apart quantities that share dimensions, such as work and torque.
Quick revision
Same dimensions: work, energy and torque; pressure, stress and Young's modulus; impulse and momentum; h and angular momentum; spring constant and surface tension.
√(l/g), RC, L/R, √(LC) → time. 1/√(μ₀ε₀), E/B → velocity.
Every added or equated term must have the same dimensions.
Arguments of sin, cos, log and exp are dimensionless.
Derivation: assume a product of powers, then equate powers of M, L and T.
NEET traps
Angles have a unit (radian) but no dimensions. Having a unit does not mean having dimensions.
Same dimensions does not mean same quantity: work and torque differ.
In y = a sin(bt − cx), b and c are not dimensionless; bt and cx are. So b/c is a velocity.
Dimensionally correct does not mean correct. Numbers like ½ are invisible to this method.
Practice MCQs: Chapter 5
1. The dimensions of the Planck constant are the same as those of: (a) energy (b) power (c) angular momentum (d) force
2. The dimensional formula of the gravitational constant G is: (a) [M L³ T⁻²] (b) [M⁻¹ L³ T⁻²] (c) [M⁻¹ L² T⁻²] (d) [M L² T⁻²]
3. Which pair has the same dimensions? (a) Torque and work (b) Force and pressure (c) Power and energy (d) Momentum and force
4. The dimensions of surface tension are: (a) [M L T⁻²] (b) [M T⁻²] (c) [M L⁻¹ T⁻²] (d) [M L² T⁻²]
5. The dimensions of the coefficient of viscosity are: (a) [M L⁻¹ T⁻¹] (b) [M L T⁻¹] (c) [M L⁻² T⁻¹] (d) [M L⁻¹ T⁻²]
6. The product RC has the dimensions of: (a) frequency (b) time (c) current (d) charge
7. The quantity 1/√(μ₀ε₀) has the dimensions of: (a) time (b) length (c) velocity (d) acceleration
8. In x = A sin(ωt), the dimensions of ω are: (a) [T] (b) [T⁻¹] (c) [L T⁻¹] (d) dimensionless
9. In (P + a/V²)(V − b) = RT, the dimensions of a are: (a) [M L⁵ T⁻²] (b) [M L⁻¹ T⁻²] (c) [L³] (d) [M L² T⁻²]
10. In the same equation, the dimensions of b are: (a) [L²] (b) [L³] (c) [M L⁻³] (d) dimensionless
11. Using dimensional analysis, the period of a simple pendulum is proportional to: (a) √(g/l) (b) √(l/g) (c) l/g (d) √(ml/g)
12. The drag force on a sphere in a viscous liquid is proportional to: (a) η r² v (b) η r v² (c) η r v (d) η² r v
13. If velocity [V], time [T] and force [F] are base quantities, mass has dimensions: (a) [F V T⁻¹] (b) [F V⁻¹ T] (c) [F T²] (d) [F V⁻¹ T⁻¹]
14. Which quantity is dimensionless? (a) Stress (b) Strain (c) Young's modulus (d) Pressure
15. Which equation is dimensionally correct? (a) v = u + at² (b) s = ut² + ½at (c) v² = u² + 2as (d) s = u + at
16. Stress has the same dimensions as: (a) force (b) pressure (c) strain (d) energy
17. The dimensions of impulse are: (a) [M L T⁻²] (b) [M L T⁻¹] (c) [M L² T⁻¹] (d) [M T⁻¹]
18. The ratio E/B (electric field to magnetic field) has the dimensions of: (a) time (b) velocity (c) acceleration (d) it is dimensionless
19. The dimensions of the Boltzmann constant are: (a) [M L² T⁻² K⁻¹] (b) [M L² T⁻² K] (c) [M L T⁻² K⁻¹] (d) [M L² T⁻¹ K⁻¹]
20. The dimensions of magnetic field B are: (a) [M T⁻² A⁻¹] (b) [M L T⁻² A⁻¹] (c) [M L² T⁻² A⁻¹] (d) [M T⁻¹ A⁻¹]
21. In y = a sin(bt − cx), the dimensions of b/c are those of: (a) length (b) time (c) velocity (d) acceleration
22. Dimensional analysis cannot be used to: (a) check an equation (b) convert units (c) find dimensionless constants (d) relate quantities by powers
23. Assertion (A): Every dimensionally correct equation is physically correct. Reason (R): Dimensional analysis cannot detect a wrong dimensionless constant. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
24. Statement I: Plane angle has a unit but no dimensions. Statement II: Two quantities with the same dimensions must be the same physical quantity. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
25. Force is given by F = at + bt², where t is time. The dimensions of b are: (a) [M L T⁻²] (b) [M L T⁻³] (c) [M L T⁻⁴] (d) [M L T⁻¹]
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | c | Both are [M L² T⁻¹]. |
| 2 | b | G = Fr²/m². |
| 3 | a | Both [M L² T⁻²]. |
| 4 | b | Force per length. |
| 5 | a | Stress divided by velocity gradient. |
| 6 | b | RC is the time constant. |
| 7 | c | It equals the speed of light. |
| 8 | b | ωt must be dimensionless. |
| 9 | a | a = PV². |
| 10 | b | b is subtracted from V. |
| 11 | b | Worked example 5.3. |
| 12 | c | Worked example 5.4. |
| 13 | b | m = F/a = F T/V. |
| 14 | b | Ratio of lengths. |
| 15 | c | All terms [L² T⁻²]. |
| 16 | b | Both are force per area. |
| 17 | b | Impulse = Ft = change in momentum. |
| 18 | b | From F = qE = qvB. |
| 19 | a | Energy per kelvin. |
| 20 | a | B = F/(qv) = [M L T⁻²]/[A T · L T⁻¹]. |
| 21 | c | b = [T⁻¹], c = [L⁻¹], so b/c = [L T⁻¹]. |
| 22 | c | Numbers have no dimensions. |
| 23 | d | A is false (v² = u² + as passes); R is true. |
| 24 | c | Work and torque share dimensions but differ. |
| 25 | c | bt² = [M L T⁻²], so b = [M L T⁻⁴]. |
Chapter 5 revision sheet
One-page summary
Dimensions are the powers to which base quantities are raised to express a quantity: [M], [L], [T], [A], [K], [mol], [cd].
A dimensional formula writes a quantity in base dimensions, e.g. force = [M L T⁻²].
Dimensionless quantities: strain, plane angle, solid angle, refractive index, relative density. Angle has a unit (radian) but no dimensions.
Principle of homogeneity: every term that is added, subtracted or equated must have the same dimensions.
Arguments of sin, cos, log and exp are dimensionless.
Use 1: check whether an equation is dimensionally consistent.
Use 2: convert units between systems (formula below).
Use 3: derive a relation by assuming a product of powers and equating powers of M, L, T.
Limits: cannot find dimensionless constants (2π, ½); cannot derive relations with sums, trig, log or exp; cannot tell scalar from vector; in mechanics handles at most three unknown powers.
A dimensionally correct equation may still be wrong; a dimensionally wrong one is surely wrong.
Same dimensions: work, energy, torque; pressure, stress, Young's modulus, energy density; impulse, momentum; h, angular momentum; spring constant, surface tension.
Time from combinations: √(l/g), RC, L/R, √(LC). Velocity: 1/√(μ₀ε₀), E/B.
√(L/C) has dimensions of resistance.
Must-remember table
| Quantity | Dimensions |
|---|---|
| Force | [M L T⁻²] |
| Work, energy, torque | [M L² T⁻²] |
| Power | [M L² T⁻³] |
| Pressure, stress | [M L⁻¹ T⁻²] |
| Momentum, impulse | [M L T⁻¹] |
| Planck constant, angular momentum | [M L² T⁻¹] |
| G | [M⁻¹ L³ T⁻²] |
| Viscosity η | [M L⁻¹ T⁻¹] |
| Surface tension, spring constant | [M T⁻²] |
| Latent heat, gravitational potential | [L² T⁻²] |
| Specific heat | [L² T⁻² K⁻¹] |
| Charge | [A T] |
| Potential difference | [M L² T⁻³ A⁻¹] |
| Resistance | [M L² T⁻³ A⁻²] |
| Capacitance | [M⁻¹ L⁻² T⁴ A²] |
| Inductance | [M L² T⁻² A⁻²] |
| Magnetic field B | [M T⁻² A⁻¹] |
Memory aids
"F-MLT-2": force is M L T⁻²; multiply by L for energy, divide by T again for power.
"Energy over L³ is Pressure": pressure has the same dimensions as energy per unit volume.
"h = Angular": Planck constant and angular momentum share [M L² T⁻¹]; both are energy × time.
"Spring and Skin": spring constant and surface tension (the skin of a liquid) both have [M T⁻²].
"Sum, Sine, Constant: cannot": dimensional analysis cannot handle sums, sine-type functions or pure constants.
Concept connections
Physics Book 3: Laws of Motion and Physics Book 4: Work, Energy and Power give the defining equations for force, impulse, work and power used here.
Physics Book 7: Properties of Solids and Liquids: Stokes' law F = 6πηrv and surface tension problems are classic dimensional derivations.
Physics Book 11: Electrostatics and Physics Book 14: Electromagnetic Induction and Alternating Currents use RC, L/R and √(LC) as time constants.
Practice MCQs: Chapter 5, new NEET pattern (Q26–40)
26. Match the quantity in List I with its dimensions in List II.
List I:
A. Coefficient of viscosity
B. Planck constant
C. Gravitational constant
D. Surface tension
List II:
i. [M T⁻²]
ii. [M⁻¹ L³ T⁻²]
iii. [M L⁻¹ T⁻¹]
iv. [M L² T⁻¹]
(a) A-iii, B-iv, C-ii, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-iii, B-ii, C-iv, D-i (d) A-i, B-iv, C-ii, D-iii
27. Match the combination in List I with the quantity it has the dimensions of in List II.
List I:
A. RC
B. 1/√(μ₀ε₀)
C. √(L/C)
D. Work per unit volume
List II:
i. Resistance
ii. Pressure
iii. Time
iv. Velocity
(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-iv, C-i, D-ii (d) A-i, B-iv, C-iii, D-ii
28. Match each quantity in List I with the quantity in List II that has the same dimensions.
List I:
A. Impulse
B. Torque
C. Angular momentum
D. Spring constant
List II:
i. Work
ii. Linear momentum
iii. Surface tension
iv. Planck constant
(a) A-ii, B-iv, C-i, D-iii (b) A-iii, B-i, C-iv, D-ii (c) A-i, B-ii, C-iv, D-iii (d) A-ii, B-i, C-iv, D-iii
29. Match the electrical quantity in List I with its dimensions in List II.
List I:
A. Electric charge
B. Potential difference
C. Resistance
D. Capacitance
List II:
i. [M L² T⁻³ A⁻²]
ii. [A T]
iii. [M⁻¹ L⁻² T⁴ A²]
iv. [M L² T⁻³ A⁻¹]
(a) A-ii, B-i, C-iv, D-iii (b) A-ii, B-iv, C-i, D-iii (c) A-iv, B-ii, C-i, D-iii (d) A-ii, B-iv, C-iii, D-i
30. How many of the following statements are correct?
A. Strain is dimensionless.
B. Plane angle has dimensions but no unit.
C. A dimensionally correct equation must be physically correct.
D. Dimensional analysis cannot give the value of a dimensionless constant.
E. In y = A sin(ωt), the product ωt is dimensionless.
(a) Two (b) Four (c) Five (d) Three
31. A damped wave is described by y = a e^(−bt) cos(kx − ωt), where x is distance and t is time. Choose the correct set of statements.
A. b has dimensions [T⁻¹].
B. k has dimensions [L⁻¹].
C. ω/k has the dimensions of velocity.
D. a and y have different dimensions.
(a) A and B only (b) A, B and C only (c) B, C and D only (d) A and D only
32. The speed v of a wave on a stretched string is assumed to be v = k Tᵃ μᵇ, where T is tension and μ is mass per unit length. Choose the correct set.
A. a = 1/2
B. b = 1/2
C. v is proportional to √(T/μ)
D. Dimensional analysis shows k = 1
(a) A and C only (b) A, B and D only (c) B and C only (d) C and D only
33. How many of the following statements are correct?
A. Dimensions cannot tell whether a quantity is a scalar or a vector.
B. Dimensional analysis can derive s = ut + ½at² completely.
C. Relations with exponential functions cannot be derived by dimensional analysis.
D. Quantities with the same dimensions must be the same physical quantity.
E. A quantity can have a unit but no dimensions.
(a) Three (b) Two (c) Four (d) One
34. A student lists these dimensional formulae.
| Row | Quantity | Dimensions written |
|---|---|---|
| P | Power | [M L² T⁻³] |
| Q | Pressure | [M L⁻¹ T⁻²] |
| R | Impulse | [M L T⁻²] |
| S | Gravitational potential | [L² T⁻²] |
Which row is wrong?
(a) P (b) Q (c) R (d) S
35. For several simple pendulums, a graph of T² (y-axis) against length L (x-axis) is a straight line through the origin. The slope of this line has dimensions (a) [L T⁻²] (b) [L⁻¹ T²] (c) [T²] (d) [L T²]
36. The table gives the powers of M, L and T for four quantities.
| Row | Power of M | Power of L | Power of T |
|---|---|---|---|
| 1 | 1 | 2 | −2 |
| 2 | 1 | −1 | −2 |
| 3 | 1 | 2 | −1 |
| 4 | 0 | 2 | −2 |
Which rows could be angular momentum and latent heat, in that order?
(a) Row 1, Row 4 (b) Row 3, Row 2 (c) Row 1, Row 2 (d) Row 3, Row 4
Case for Q37–38: A falling raindrop wobbles. A student assumes that its wobble frequency f depends only on surface tension S, density ρ and radius r, as f = k Sᵃ ρᵇ rᶜ, with k a pure number.
37. The power a of S is (a) −1/2 (b) 3/2 (c) 1/2 (d) −3/2
38. If the radius doubles while S and ρ stay the same, the frequency becomes (a) f/2 (b) f/(2√2) (c) 2√2 f (d) f/4
39. In a new system the unit of force is 10 N, the unit of length is 2 m and the unit of time is 1 s. The unit of mass in this system is (a) 20 kg (b) 0.2 kg (c) 50 kg (d) 5 kg
40. If the speed of light c, Planck constant h and gravitational constant G are taken as fundamental quantities, mass has the dimensions of (a) √(hc/G) (b) √(hG/c³) (c) √(hG/c⁵) (d) √(Gc/h)
Answer key (Q26–40)
| Q | Ans | Reason |
|---|---|---|
| 26 | a | η [M L⁻¹ T⁻¹], h [M L² T⁻¹], G [M⁻¹ L³ T⁻²], S [M T⁻²] |
| 27 | c | RC is time; 1/√(μ₀ε₀) is speed of light; L/C has ohm²; energy per volume is pressure |
| 28 | d | Impulse-momentum, torque-work, angular momentum-h, spring constant-surface tension |
| 29 | b | q = It; V = W/q; R = V/I; C = q/V |
| 30 | d | A, D, E true; angle has a unit but no dimensions |
| 31 | b | bt, kx and ωt are dimensionless; the cosine and exponential are pure numbers, so a has the dimensions of y |
| 32 | a | M: a + b = 0; T: −2a = −1, so a = 1/2, b = −1/2; k is not found |
| 33 | a | A, C, E true; sums cannot be derived; torque and work differ |
| 34 | c | Impulse = force × time = [M L T⁻¹] |
| 35 | b | Slope = T²/L = 4π²/g, dimensions [L⁻¹ T²] |
| 36 | d | Angular momentum [M L² T⁻¹]; latent heat (energy per mass) [L² T⁻²] |
| 37 | c | M: a + b = 0; T: −2a = −1; so a = 1/2, b = −1/2, c = −3/2 |
| 38 | b | f varies as r^(−3/2); 2^(−3/2) = 1/(2√2) |
| 39 | d | Mass = force × time²/length = 10 × 1/2 = 5 kg |
| 40 | a | hc/G has dimensions [M²], so mass = √(hc/G) |