Last-Week Revision Kit
Use this kit in the final seven days: one look at the formulas, one pass of the facts, one honest check of your weak spots, and one timed paper.
Book-at-a-glance sheet
Chapters 1–2: Work and kinetic energy
| Idea | Formula | Remember |
|---|---|---|
| Work, constant force | W = F s cos θ = F · s | Zero at 90° |
| Work, variable force | W = ∫ F dx | Area under F–x |
| Units | 1 J = 10⁷ erg; 1 kWh = 3.6 × 10⁶ J; 1 eV = 1.6 × 10⁻¹⁹ J | All energy units |
| Kinetic energy | K = ½mv² = p²/2m | Never negative |
| Work-energy theorem | W(net) = ΔK | Any force |
| Stopping distance | d = mv²/2F | d ∝ v² |
Chapters 3–4: Potential energy and conservation
| Idea | Formula | Remember |
|---|---|---|
| Conservative force | F = −dU/dx | Closed-path work zero |
| Gravity PE | mgh near Earth; −GMm/r far away | Zero level is a choice |
| Spring PE | ½kx² = F²/2k | Same for stretch or squeeze |
| Equilibrium | dU/dx = 0 | Minimum stable, maximum unstable |
| Energy law | W(nc) = ΔK + ΔU | Friction makes it negative |
| Block hits spring | x = v√(m/k) | Smooth floor |
Chapter 5: Power
| Idea | Formula | Remember |
|---|---|---|
| Power | P = dW/dt = F · v | 1 hp = 746 W |
| Pump | P = (m/t)gh | Divide by efficiency for input |
| Vehicle on slope | P = (mg sin θ + f)v | Constant speed |
| Constant power | v ∝ t^½, x ∝ t^(3/2) | From rest |
Chapter 6: Vertical circle
| Idea | String | Rod |
|---|---|---|
| Minimum top speed | √(gR) | 0 |
| Minimum bottom speed | √(5gR) | 2√(gR) |
| T(bottom) − T(top) | 6mg | 6mg |
| Loop release height | 2.5R | 2R (bead) |
Chapter 7: Collisions
| Idea | Formula | Remember |
|---|---|---|
| Elastic, m₂ at rest | v₁ = (m₁ − m₂)u/(m₁ + m₂); v₂ = 2m₁u/(m₁ + m₂) | Equal masses swap |
| Perfectly inelastic | v = (m₁u₁ + m₂u₂)/(m₁ + m₂) | Largest KE loss |
| Restitution | e = separation speed ÷ approach speed | 0 to 1 |
| Bounces | hₙ = e^(2n) h | e = √(h₁/h₀) |
| KE transferred | 4m₁m₂/(m₁ + m₂)² | 1 for equal masses |
40 rapid-fire facts
Work is a scalar, measured in joule.
1 joule = 1 newton × 1 metre = 10⁷ erg.
Work is zero when force and displacement are perpendicular.
Work by kinetic friction on a body sliding on a fixed floor is always negative.
Static friction can do positive work, as on a crate in an accelerating truck.
The normal force does work when the surface itself moves, as in a lift.
The area under an F–x graph gives work; the area under an F–t graph gives impulse.
Work done by gravity depends only on the change in height.
Work and energy have dimensions [ML²T⁻²].
Kinetic energy can never be negative.
For the same momentum, the lighter body has more kinetic energy.
For the same kinetic energy, the heavier body has more momentum.
A 10% rise in momentum raises kinetic energy by 21%.
The work-energy theorem holds for all forces, conservative or not.
With friction alone, stopping distance is v²/(2μg) and does not depend on mass.
A bullet loses the same KE in each identical plank, not the same speed.
Potential energy is defined only for conservative forces.
Gravity, spring and electrostatic forces are conservative.
Friction, air drag and viscous forces are non-conservative.
Force points from high potential energy towards low potential energy.
Stable equilibrium sits at a minimum of U; unstable at a maximum.
Spring PE is the same for an extension x and a compression x.
Stretching a spring from x to 2x needs three times the work of 0 to x.
Cutting a spring in half doubles its spring constant.
A load released suddenly on a spring gives twice the gentle extension.
A body on a spring is fastest where the spring force equals its weight.
On a smooth track, speed depends only on the height dropped.
1 kilowatt-hour = 3.6 × 10⁶ J and is a unit of energy.
1 horsepower = 746 W.
Instantaneous power equals F · v and can be negative.
Under constant power from rest, speed grows as the square root of time.
In a vertical circle on a string, the minimum speed at the top is √(gR).
To complete the circle on a string, the bottom speed must be at least √(5gR).
Tension at the bottom exceeds tension at the top by 6mg.
A bob given less than √(2gR) at the bottom only swings, never above the horizontal.
Momentum is conserved in every collision of an isolated system.
Kinetic energy is conserved only in elastic collisions.
Equal masses in a head-on elastic collision exchange velocities.
Equal masses in an oblique elastic collision (one at rest) move off at 90°.
A ball's bounce height falls by a factor e² at every bounce.
Common mistakes checklist
I can find the sign of work for friction, gravity and normal force in any set-up.
I don't confuse the area under an F–x graph (work) with the area under an F–t graph (impulse).
I can switch between K and p using K = p²/2m without mixing up which body has more.
I use (p₂/p₁)² for large percentage changes and the 2× rule only for small ones.
I don't confuse the work-energy theorem (all forces) with conservation of mechanical energy (conservative forces only).
I can read force, equilibrium and turning points from a U–x graph.
I can write spring work as ½k(x₁² − x₂²) and get its sign right.
I don't confuse kW (power) with kWh (energy).
I can tell when a string goes slack in a vertical circle and use √(gR) only for strings, not rods.
I conserve momentum in every collision but conserve KE only when the collision is elastic.
Mock Test 2: New-pattern paper
Time: 35 minutes. 30 questions. Marking: +4 for a correct answer, −1 for a wrong one, 0 if left blank. Take g = 10 m/s². Questions mix all seven chapters and every new format.
1. A force F = (2i − 3j + k) N moves a body through s = (4i + 2j − 2k) m. The work done is
(a) 4 J (b) zero (c) 16 J (d) −2 J
2. A force F = (6 − 2x) N acts along x. The work done from x = 0 to x = 4 m is
(a) 8 J (b) 16 J (c) 24 J (d) zero
3. Bodies of mass 1 kg and 9 kg have equal kinetic energies. The ratio of their momenta is
(a) 1 : 9 (b) 3 : 1 (c) 1 : 3 (d) 9 : 1
4. The kinetic energy of a 4 kg body rises from 50 J to 200 J. The increase in its momentum, in kg m/s, is
(a) 10 (b) 40 (c) 30 (d) 20
5. Match List I (expression) with List II (quantity).
A. ½kx²
B. p²/2m
C. F · v
D. 4m₁m₂/(m₁ + m₂)²
List II: (i) instantaneous power (ii) spring PE (iii) kinetic energy (iv) fraction of KE transferred in a head-on elastic collision with a body at rest
(a) A-ii, B-iii, C-i, D-iv (b) A-iii, B-ii, C-i, D-iv (c) A-ii, B-iii, C-iv, D-i (d) A-iv, B-iii, C-i, D-ii
6. Match List I with List II.
A. Power of a pump lifting 50 kg of water per second through 4 m
B. KE of a 0.5 kg ball at 4 m/s
C. PE of a spring (k = 200 N/m) stretched 0.3 m
D. Gain in PE of a 2 kg bag lifted 1.5 m
List II: (i) 4 J (ii) 9 J (iii) 30 J (iv) 2 kW
(a) A-iv, B-ii, C-i, D-iii (b) A-iv, B-i, C-ii, D-iii (c) A-iii, B-i, C-ii, D-iv (d) A-iv, B-i, C-iii, D-ii
7. Match List I with List II.
A. Tension at the top for a bob that just completes a vertical circle on a string
B. T(bottom) − T(top) for that bob
C. Common velocity when a body moving at u sticks to an equal body at rest
D. Bottom speed that just lets a bob on a string reach the horizontal position
List II: (i) 6mg (ii) zero (iii) √(2gR) (iv) u/2
(a) A-i, B-ii, C-iv, D-iii (b) A-ii, B-i, C-iii, D-iv (c) A-ii, B-iv, C-i, D-iii (d) A-ii, B-i, C-iv, D-iii
8. How many of the following statements are correct?
A. Gravity does no work on a satellite in a circular orbit.
B. Power is a vector quantity.
C. The spring force is conservative.
D. In an elastic collision, the KE of each body is separately conserved.
E. Mechanical energy is conserved when only conservative forces do work.
(a) 2 (b) 4 (c) 3 (d) 5
9. A 1 kg stone falls from rest through 20 m into a sand pit and sinks 0.2 m before stopping. Choose the correct set of statements.
A. It reaches the sand at 20 m/s.
B. The average resisting force of the sand is 1010 N.
C. The work done by the sand is −202 J.
D. The total work done by gravity is 200 J.
(a) A, B and C only (b) A and B only (c) B, C and D only (d) A and D only
10. A particle moves along x with U = (2x³ − 6x) J, x in m. Choose the correct set of statements.
A. It has equilibrium points at x = +1 m and x = −1 m.
B. x = +1 m is a point of stable equilibrium.
C. x = −1 m is a point of stable equilibrium.
D. The force on it at x = 0 is +6 N.
(a) A and C only (b) B and C only (c) All of A, B, C and D (d) A, B and D only
11. How many of the following statements are correct?
A. 1 kWh = 3.6 MJ.
B. A 1 hp motor running for 1 hour does about 2.69 MJ of work.
C. The area under a P–t graph gives energy.
D. At constant engine power, the tractive force falls as the car speeds up.
(a) 4 (b) 3 (c) 2 (d) 1
12. A 2 kg block starts from rest on a smooth floor. The F–x graph of the force on it is flat at 5 N from x = 0 to 4 m, then falls in a straight line to 0 at x = 6 m. Its speed at x = 6 m is
(a) √20 m/s (b) 5 m/s (c) 25 m/s (d) 2.5 m/s
13. The U–x graph of a particle is a parabola with its lowest point U = −8 J at x = 3 m, and U = 10 J at x = 0 and x = 6 m. The particle's total mechanical energy is 2 J. Its maximum kinetic energy is
(a) 10 J (b) 2 J (c) 8 J (d) 12 J
14. A 2 kg block starts from rest under a constant 4 N net force. Its P–t graph is a straight line through the origin. The power at t = 3 s is
(a) 12 W (b) 48 W (c) 24 W (d) 36 W
15. A ball is dropped on a floor. The table gives the heights it reaches.
| Drop or bounce | Start | After 1st | After 2nd |
|---|---|---|---|
| Height (m) | 5.0 | 3.2 | 2.048 |
The coefficient of restitution, and the height after the 3rd bounce, are
(a) 0.64, 1.31 m (b) 0.8, 1.31 m (c) 0.8, 1.64 m (d) 0.64, 1.64 m
16. Assertion (A): In a perfectly inelastic collision, the total kinetic energy after the collision is always zero. Reason (R): In a perfectly inelastic collision, the bodies move together after the collision. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
17. Assertion (A): A machine of power 1 kW does 1000 J of work every second. Reason (R): 1 kWh = 3.6 × 10⁶ J. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
18. Assertion (A): The mechanical energy of a block sliding down a rough incline decreases. Reason (R): Kinetic friction is a non-conservative force that does negative work on the block. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
19. Statement I: The work done by a conservative force round a closed path is zero. Statement II: The work done by kinetic friction round a closed path is zero. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
20. Statement I: For a bob on a string in a vertical circle, the minimum speed at the top is √(gR). Statement II: For a bob on a light rigid rod, the minimum speed at the bottom is 2√(gR). (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Passage for Q21–22: A lift and its passengers have a total mass of 600 kg. The lift rises 30 m at a steady 2 m/s. Friction in the shaft is 1000 N. The motor is 70% efficient.
21. The power delivered by the motor to the lift is
(a) 12 kW (b) 2 kW (c) 14 kW (d) 7 kW
22. The electrical energy used by the motor for the whole 30 m rise is
(a) 210 kJ (b) 147 kJ (c) 420 kJ (d) 300 kJ
Passage for Q23–24: A 0.2 kg ball tied to a 0.5 m string is whirled in a vertical circle. At the lowest point its speed is 5 m/s.
23. The speed and the string tension at the top of the circle are
(a) √5 m/s, zero (b) √5 m/s, 2 N (c) 5 m/s, zero (d) 3 m/s, 1.6 N
24. The tension at the lowest point is
(a) 10 N (b) 2 N (c) 8 N (d) 12 N
25. Blocks of 2 kg and 3 kg on a smooth floor are held against a compressed light spring between them and then released. The 2 kg block moves off at 3 m/s. The energy stored in the spring was
(a) 9 J (b) 15 J (c) 6 J (d) 25 J
26. A 1 kg block moving at 10 m/s crosses a 5 m rough patch (μ = 0.5), then a smooth floor, and hits a spring of k = 100 N/m. The maximum compression is about
(a) 0.71 m (b) 0.5 m (c) 1 m (d) 0.25 m
27. A 1000 kg car's engine delivers a constant 40 kW. The total resistance is 1000 N. The acceleration of the car when its speed is 10 m/s is
(a) 4 m/s² (b) 1 m/s² (c) 3 m/s² (d) 40 m/s²
28. A neutron hits a deuteron (twice its mass) at rest, head-on and elastically. The fraction of its kinetic energy that the neutron loses is
(a) 1/9 (b) 8/9 (c) 2/3 (d) 1/3
29. A 2 kg particle has velocity v = 3t² m/s. The work done by the net force in the first 2 s is
(a) 288 J (b) 72 J (c) 36 J (d) 144 J
30. A bob on a 0.8 m string is released from rest with the string horizontal. At the lowest point it hits an equal-mass block at rest, head-on and elastically. The block then slides on a rough floor with μ = 0.4. The distance it slides before stopping is
(a) 4 m (b) 0.8 m (c) 2 m (d) 1 m
Mock Test 2 answer key
| Q | Ans | Reason |
|---|---|---|
| 1 | b | 8 − 6 − 2 = 0 |
| 2 | a | [6x − x²] from 0 to 4 = 24 − 16 = 8 J |
| 3 | c | p = √(2mK) ∝ √m: 1 : 3 |
| 4 | d | p = √(2 × 4 × K): 20 → 40 kg m/s |
| 5 | a | Spring PE, KE, power, KE transfer fraction |
| 6 | b | 50 × 10 × 4 = 2000 W; 4 J; ½ × 200 × 0.09 = 9 J; 30 J |
| 7 | d | T(top) = 0; 6mg; u/2; ½u² = gR |
| 8 | c | A, C, E true; power is scalar; only total KE is conserved |
| 9 | a | v = √400 = 20 m/s; F × 0.2 = 10 × 20.2, F = 1010 N; gravity does 202 J in all |
| 10 | d | dU/dx = 6x² − 6 = 0 at x = ±1; U'' = 12x: +1 stable, −1 unstable; F(0) = +6 N |
| 11 | a | 746 × 3600 ≈ 2.69 MJ; F = P/v falls as v rises; all four true |
| 12 | b | W = 20 + 5 = 25 J = ½ × 2 × v², v = 5 m/s |
| 13 | a | K(max) = 2 − (−8) = 10 J at x = 3 m |
| 14 | c | a = 2 m/s², v(3 s) = 6 m/s, P = 4 × 6 = 24 W |
| 15 | b | e² = 3.2/5 = 0.64, e = 0.8; 2.048 × 0.64 ≈ 1.31 m |
| 16 | d | KE after is zero only if total momentum is zero |
| 17 | b | Both true; R is a unit conversion, not the reason |
| 18 | a | Friction's negative work lowers mechanical energy |
| 19 | c | Friction's work round a closed path is negative, not zero |
| 20 | a | A rod can push, so top speed 0 gives bottom speed √(4gR) |
| 21 | c | F = 6000 + 1000 = 7000 N; P = 7000 × 2 = 14 kW |
| 22 | d | Time 15 s; useful 210 kJ; input 210/0.7 = 300 kJ |
| 23 | a | v² = 25 − 2 × 10 × 1 = 5; T = 0.2 × 5/0.5 − 2 = 0 |
| 24 | d | T = 2 + 0.2 × 25/0.5 = 12 N (= 6mg) |
| 25 | b | 3 kg block gets 2 m/s; KE = 9 + 6 = 15 J |
| 26 | a | 50 − 25 = 25 J left; ½ × 100 × x² = 25, x ≈ 0.71 m |
| 27 | c | F = 40000/10 = 4000 N; a = (4000 − 1000)/1000 = 3 m/s² |
| 28 | b | 4 × 1 × 2/(1 + 2)² = 8/9 |
| 29 | d | v(2) = 12 m/s; W = ½ × 2 × 144 = 144 J |
| 30 | c | v = √(2gL) = 4 m/s, passed fully to the block; d = 16/(2 × 0.4 × 10) = 2 m |