Chapter 3 of 11 · 29 min read

Chapter 1: Work

What you will learn

  • What "work" means in physics, and why holding a heavy bag still is zero work.

  • How to find work done by a constant force using W = F s cos θ and the dot product.

  • When work is positive, negative or zero.

  • How to find work done by a variable force by integration, and as the area under an F-x graph.

  • The work done by gravity, friction and a spring force.

1.1 What work means in physics

In daily life, sitting and studying for six hours feels like hard work. In physics it is not work at all. Physics uses the word in a narrow sense.

A force does work on a body when two things happen together. The force acts on the body, and the point where it acts moves. The moving part must have some component along the force.

Think of a coolie carrying a suitcase on his head along a flat platform. His upward push on the suitcase is vertical. The suitcase moves horizontally. The upward force has no component along the motion, so it does zero work on the suitcase. His muscles still get tired, but that is chemistry inside his body, not mechanical work on the suitcase.

Work is a scalar. It has size and sign, but no direction.

1.2 Work done by a constant force

Let a constant force F act on a body while the body moves through a displacement s. Let θ be the angle between F and s.

Only the part of F along s, which is F cos θ, helps or opposes the motion. So the work is that component times the distance moved.

W=(Fcos⁡θ) s=F scos⁡θ=F⃗⋅s⃗W = (F\cos\theta)\,s = F\,s\cos\theta = \vec F\cdot\vec s

In component form, with F = Fx i + Fy j + Fz k and s = x i + y j + z k:

W=Fxx+Fyy+FzzW = F_x x + F_y y + F_z z

The sign of work depends only on θ.

Angle θ between F and scos θWorkEveryday example
0° ≤ θ < 90°positivepositivePulling a cricket kit bag forward with a strap
θ = 90°zerozeroString tension on a stone whirled in a circle
90° < θ ≤ 180°negativenegativeBrakes on an auto-rickshaw as it slows down

Positive work feeds energy into the body. Negative work takes energy out. Zero work does neither.

Three cases of zero work are common in NEET:

  1. No displacement (pushing a wall, holding a bag still).

  2. Force perpendicular to displacement (normal force on a block sliding on a flat floor, centripetal force in uniform circular motion).

  3. The point of application does not move, even if the body as a whole does (friction on a wheel that rolls without slipping, at the contact point).

1.3 Units and dimensions

The SI unit of work is the joule. One joule is the work done when a force of 1 N moves its point of application 1 m along the force.

1 J=1 N m=1 kg m2 s−2,[W]=[M L2 T−2]1\ \text{J} = 1\ \text{N m} = 1\ \text{kg m}^2\,\text{s}^{-2}, \qquad [W] = [\text{M}\,\text{L}^2\,\text{T}^{-2}]
UnitValue in jouleWhere you meet it
erg (CGS)10⁻⁷ JOlder textbooks, dimension questions
electron volt (eV)1.6 × 10⁻¹⁹ JAtoms, photons, modern physics
calorie4.186 J (about 4.2 J)Heat, food energy
kilowatt hour (kWh)3.6 × 10⁶ JYour electricity bill ("1 unit")

Work and torque share the same dimensions, [ML²T⁻²]. They are still different quantities. Torque is a vector, work is a scalar.

1.4 Work done by a variable force

Most real forces change as the body moves. A spring pulls harder as you stretch it more. A bungee cord does the same.

Split the path into tiny steps dx. Over one step the force hardly changes, so the tiny work is F dx. Add all such steps:

W=∫x1x2F(x) dxW = \int_{x_1}^{x_2} F(x)\,dx

In three dimensions this becomes:

W=∫F⃗⋅ds⃗=∫(Fx dx+Fy dy+Fz dz)W = \int \vec F\cdot d\vec s = \int (F_x\,dx + F_y\,dy + F_z\,dz)

The integral of F over x is the area between the F-x curve and the x-axis. So:

  • Area above the x-axis counts as positive work.

  • Area below the x-axis counts as negative work.

  • Net work is the signed sum of all the areas.

For straight-line graphs, you never need calculus. Break the region into rectangles and triangles.

Figure 1.1 · Work as signed area under an F-x graph
Figure 1.1 · Work as signed area under an F-x graph

The three shaded regions above the axis add 50 J, the rectangle below takes away 10 J, so the net work from 0 to 9 m is 40 J.

1.5 Work done by common forces

Gravity. Near the earth, gravity is mg downward, a constant force. If a body falls through height h, gravity does +mgh of work. If it rises through h, gravity does −mgh. Only the vertical drop matters, not the path. A ball rolling down a curved slide and one dropped straight down through the same height get the same work from gravity.

Wg=mg (hinitial−hfinal)W_g = mg\,(h_{\text{initial}} - h_{\text{final}})

Lifting at constant speed. If you lift a bucket slowly (no change in speed), your force equals mg. You do +mgh, gravity does −mgh, and the net work is zero.

Kinetic friction. For a body sliding on a fixed surface, kinetic friction μk N acts opposite to the sliding. Its work on the body is negative:

Wf=−μkN sW_f = -\mu_k N\,s

Friction work depends on path length, not just on start and end points. Drag a box 5 m forward and 5 m back, and friction has done negative work over the full 10 m.

Static friction can do positive work. Put a box of mangoes on the floor of a tempo that speeds up. The box does not slip, yet it speeds up with the tempo. The only horizontal force on it is static friction, pointing forward. The box moves forward too. So static friction does positive work on the box in the ground frame.

Spring force. An ideal spring obeys Hooke's law, F = −kx, where x is the extension or compression from the natural length. The minus sign says the spring always pulls back towards natural length.

Work done by the spring as x goes from x₁ to x₂:

Wspring=∫x1x2(−kx) dx=−12k(x22−x12)W_{\text{spring}} = \int_{x_1}^{x_2} (-kx)\,dx = -\tfrac{1}{2}k\left(x_2^2 - x_1^2\right)

The work done by you (an external agent pulling slowly) is the negative of this, +½k(x₂² − x₁²). Stretching from 0 to x needs ½kx². Notice the squares. Stretching from x to 2x needs three times as much work as stretching from 0 to x.

Normal force and tension. These do zero work whenever they are perpendicular to the motion. The tension in a simple pendulum string is always along the radius, while the bob moves along the arc. So tension does zero work on the bob.

1.6 Work depends on the frame

Displacement depends on who is watching. So work done by a force can differ between frames.

Sit in a train moving at steady speed and hold your bag on your lap. In the train frame, your upward force does zero work, and nothing moves. In the ground frame the bag moves forward, but your force is vertical, so it is still zero. Now push the bag forward along the seat at steady speed: you do positive work in both frames, but different amounts, because the displacements differ.

NEET only expects you to know this fact. All calculations in this book use the ground frame unless stated.

Worked example 1.1: A boy pulls a toy cart with a string that makes 60° with the ground. The tension is 40 N, and the cart moves 5 m along the ground. Find the work done by the tension.

Solution: W = F s cos θ = 40 × 5 × cos 60° = 40 × 5 × 0.5 = 100 J.

Worked example 1.2: A force F = (3i + 4j − 2k) N acts on a particle that moves through s = (2i − j + 3k) m. Find the work done.

Solution: W = F · s = (3)(2) + (4)(−1) + (−2)(3) = 6 − 4 − 6 = −4 J. The negative sign means the force, overall, opposes the displacement.

Worked example 1.3: A villager draws a 2 kg bucket of water 10 m up from a well at constant speed. Find the work done by (a) the villager, (b) gravity, (c) all forces together.

Solution: At constant speed, the pull equals the weight, 2 × 10 = 20 N. (a) W = 20 × 10 = +200 J. (b) Gravity acts down, the bucket moves up: W = −200 J. (c) Net work = 200 − 200 = 0. This matches the fact that the speed did not change.

Worked example 1.4: A 5 kg carton is dragged 4 m at constant velocity across a floor with μk = 0.2, using a horizontal rope. Find the work done by friction and by the rope.

Solution: N = mg = 50 N, so friction f = 0.2 × 50 = 10 N. Work by friction = −10 × 4 = −40 J. Constant velocity means the rope force equals friction, 10 N. Work by rope = +40 J.

Worked example 1.5: A force F = (3x² + 2x) N acts along the x-axis. Find the work done as the particle moves from x = 1 m to x = 3 m.

Solution:

W=∫13(3x2+2x) dx=[x3+x2]13=(27+9)−(1+1)=34 JW = \int_1^3 (3x^2 + 2x)\,dx = \big[x^3 + x^2\big]_1^3 = (27 + 9) - (1 + 1) = 34\ \text{J}

Worked example 1.6: The force on a particle varies with x as follows. From x = 0 to 2 m it rises evenly from 0 to 10 N. From 2 m to 5 m it stays at 10 N. From 5 m to 7 m it falls evenly to 0. From 7 m to 9 m it is −5 N. Find the net work from 0 to 9 m. (This is the graph in Figure 1.1.)

Solution: Add the signed areas. Triangle, 0 to 2 m: ½ × 2 × 10 = 10 J. Rectangle, 2 to 5 m: 3 × 10 = 30 J. Triangle, 5 to 7 m: ½ × 2 × 10 = 10 J. Rectangle below axis, 7 to 9 m: 2 × (−5) = −10 J. Net work = 10 + 30 + 10 − 10 = 40 J.

Worked example 1.7: A spring of force constant 200 N/m is already stretched by 2 cm. How much work must you do to stretch it further to 6 cm? What work does the spring do in this process?

Solution:

Wyou=12k(x22−x12)=12(200)(0.062−0.022)=100×0.0032=0.32 JW_{\text{you}} = \tfrac12 k\left(x_2^2 - x_1^2\right) = \tfrac12 (200)\left(0.06^2 - 0.02^2\right) = 100 \times 0.0032 = 0.32\ \text{J}

The spring does −0.32 J, since it pulls back while the end moves out.

Worked example 1.8 (NEET-hard): A uniform chain of mass 3 kg and length 1.8 m lies on a smooth table with one-third of its length hanging over the edge. Find the work needed to pull the hanging part slowly back onto the table.

Solution: Hanging length = 0.6 m, hanging mass = 1 kg. Its centre of mass is at the middle of the hanging part, 0.3 m below the table top. Pulling it back raises this 1 kg through 0.3 m. The part already on the table does not change height.

W=mhang g hcm=1×10×0.3=3 JW = m_{\text{hang}}\,g\,h_{\text{cm}} = 1 \times 10 \times 0.3 = 3\ \text{J}

In general, if 1/n of a chain of mass M and length L hangs, W = MgL / (2n²). Here n = 3, so W = 3 × 10 × 1.8 / 18 = 3 J.

Quick revision

  • W = F s cos θ = F · s for a constant force. Work is a scalar.

  • Positive for θ < 90°, zero at 90°, negative for θ > 90°.

  • Variable force: W = ∫ F dx = signed area under the F-x graph.

  • Gravity: W = mg × (drop in height), independent of path.

  • Kinetic friction on a sliding body: W = −μN × path length.

  • Spring: W by spring = −½k(x₂² − x₁²); work by you = +½k(x₂² − x₁²).

  • 1 J = 10⁷ erg; 1 eV = 1.6 × 10⁻¹⁹ J; 1 kWh = 3.6 × 10⁶ J.

  • Hanging chain (1/n of it over the edge): W = MgL / (2n²).

NEET traps

  • Using sin θ instead of cos θ when the angle is given with the vertical rather than the horizontal. Always find the angle between F and s.

  • Thinking "no motion of the body" is the only zero-work case. A force perpendicular to motion also does zero work.

  • Treating spring work as linear. Stretching 2 cm to 4 cm takes three times the work of 0 to 2 cm, not the same.

  • Forgetting that area below the x-axis on an F-x graph is negative work.

  • Saying friction always does negative work. Static friction on a box in an accelerating truck does positive work.

  • Using the full chain mass and full length in the chain problem. Only the hanging part rises, and its centre of mass rises by half the hanging length.

Practice MCQs: Chapter 1

Level 1: Concept check

1. A force of 20 N moves a box 3 m along the direction of the force. The work done is (a) 6.7 J (b) 23 J (c) 60 J (d) 17 J

2. A stone tied to a string moves in a horizontal circle at constant speed. The work done by the string tension in one full revolution is (a) zero (b) 2πrT (c) πrT (d) rT

3. One kilowatt hour equals (a) 3.6 × 10³ J (b) 3.6 × 10⁵ J (c) 3.6 × 10⁶ J (d) 3.6 × 10⁹ J

4. The dimensional formula of work is (a) [MLT⁻²] (b) [ML²T⁻³] (c) [ML⁻¹T⁻²] (d) [ML²T⁻²]

5. A box slides along a fixed rough floor and slows down. The work done on the box by kinetic friction is (a) positive (b) negative (c) zero (d) positive or negative depending on speed

6. A force F = (2i + 3j) N displaces a particle by s = (4i − 2j) m. The work done is (a) 2 J (b) 14 J (c) 10 J (d) −2 J

7. The area under a force versus displacement graph gives (a) impulse (b) power (c) work (d) momentum

8. A porter carries a 15 kg suitcase on his head and walks 20 m along a level platform at constant speed. The work done by his upward force on the suitcase is (a) 3000 J (b) zero (c) 300 J (d) 1500 J

9. One joule equals (a) 10⁵ erg (b) 10³ erg (c) 10⁻⁷ erg (d) 10⁷ erg

10. A 2 kg ball falls freely through 5 m. The work done on it by gravity is (a) +100 J (b) −100 J (c) +10 J (d) −10 J

Level 2: NEET standard

11. A sledge is pulled 10 m along level snow by a rope at 37° above the horizontal. The tension is 50 N. Take cos 37° = 0.8. The work done by the tension is (a) 300 J (b) 400 J (c) 500 J (d) 250 J

12. A force F = 5x newton (x in metre) acts along the x-axis. The work done from x = 2 m to x = 4 m is (a) 30 J (b) 60 J (c) 10 J (d) 20 J

13. A spring of force constant 500 N/m is already stretched by 4 cm. The work needed to stretch it further to 8 cm is (a) 0.4 J (b) 0.8 J (c) 1.2 J (d) 1.6 J

14. A 4 kg body is lifted 3 m by a rope with an upward acceleration of 2 m/s². The work done by the rope is (a) 120 J (b) 144 J (c) 96 J (d) 24 J

15. A 10 kg crate is dragged 5 m at constant speed across a floor with μk = 0.3 using a horizontal pull. The work done against friction is (a) 15 J (b) 50 J (c) 500 J (d) 150 J

16. A force on a particle is 6 N from x = 0 to x = 4 m, and then falls evenly to zero at x = 8 m. The work done from x = 0 to x = 8 m is (a) 48 J (b) 24 J (c) 36 J (d) 12 J

17. A constant force F = (2i + 3j) N moves a particle from the point (1 m, 2 m) to the point (4 m, 6 m). The work done is (a) 18 J (b) 24 J (c) 12 J (d) 30 J

18. A force F = (3i + 4j) N acts on a particle that is displaced by s = (4i − 3j) m. The work done is (a) 25 J (b) 7 J (c) zero (d) 24 J

19. A uniform chain of mass 4 kg and length 2 m lies on a smooth table with half its length hanging over the edge. The work needed to pull the hanging part back on the table is (a) 20 J (b) 10 J (c) 5 J (d) 40 J

20. A body is carried along a closed path in the earth's uniform gravitational field and returns to its starting point. The total work done by gravity is (a) positive (b) negative (c) dependent on the shape of the path (d) zero

21. A spring of force constant k is stretched from extension x to extension 2x. The work done by the spring force is (a) +3kx²/2 (b) −3kx²/2 (c) −kx²/2 (d) −2kx²

22. A 50 kg student climbs 20 steps, each 15 cm high. The work done by the student against gravity is (a) 1500 J (b) 750 J (c) 15000 J (d) 3000 J

Level 3: Challenge

23. A force F = (6x² − 4x) N acts along the x-axis. The work done as the particle moves from x = 0 to x = 2 m is (a) 16 J (b) 4 J (c) 8 J (d) 24 J

24. A force F = (y i + x j) N acts on a particle that moves along the straight line from (0, 0) to (2 m, 3 m). The work done is (a) 12 J (b) 6 J (c) 5 J (d) 3 J

25. A 2 kg box rests on the floor of a truck that starts from rest and accelerates at 3 m/s². The box does not slip. While the truck covers 10 m, the work done by friction on the box (ground frame) is (a) 60 J (b) zero (c) −60 J (d) 20 J

26. A leaky bucket with water has a total mass of 10 kg at the bottom of a 10 m deep well. It is pulled up at constant speed and loses water at a steady rate, reaching the top with a total mass of 6 kg. The work done by the puller is (a) 1000 J (b) 600 J (c) 800 J (d) 700 J

27. A spring of force constant 400 N/m is compressed by 5 cm. It is released and moves until it is stretched by 5 cm. The work done by the spring force during this motion is (a) 1 J (b) −1 J (c) 0.5 J (d) zero

28. A force F = (2i + 3j + 4k) N does 20 J of work on a particle displaced by s = (i + 2j + a k) m. The value of a is (a) 2 (b) 3 (c) 4 (d) 5

29. Assertion (A): The work done by static friction on a body can be positive. Reason (R): Static friction on a body always acts opposite to the body's direction of motion relative to the ground. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: The work done by a force on a body can have different values in different inertial frames. Statement II: The work done by gravity on a body taken round a closed path is zero. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1cW = 20 × 3 = 60 J
2aTension is perpendicular to velocity at every instant
3c1000 W × 3600 s = 3.6 × 10⁶ J
4dForce × length = [MLT⁻²][L]
5bFriction opposes sliding, θ = 180°
6a2 × 4 + 3 × (−2) = 2 J
7c∫ F dx is work
8bUpward force is perpendicular to horizontal motion
9d1 J = 10⁵ dyne × 10² cm = 10⁷ erg
10amgh = 2 × 10 × 5 = +100 J
11b50 × 10 × 0.8 = 400 J
12a2.5(4² − 2²) = 30 J
13c½ × 500 × (0.0064 − 0.0016) = 1.2 J
14bT = m(g + a) = 48 N; 48 × 3 = 144 J
15df = 0.3 × 100 = 30 N; 30 × 5 = 150 J
16cRectangle 24 J + triangle 12 J
17as = (3i + 4j); 6 + 12 = 18 J
18c12 − 12 = 0; F is perpendicular to s
19b2 kg raised 0.5 m: 10 J
20dGravity is conservative
21b−½k(4x² − x²) = −3kx²/2
22a50 × 10 × 3 m = 1500 J
23c[2x³ − 2x²] from 0 to 2 = 16 − 8 = 8 J
24bF dot ds = d(xy), so W = xy at (2, 3) = 6 J
25af = ma = 6 N forward, moves 10 m: +60 J
26cMass falls linearly; average 8 kg × 10 × 10 = 800 J
27dx₁² = x₂², so −½k(x₂² − x₁²) = 0
28b2 + 6 + 4a = 20 gives a = 3
29cStatic friction opposes relative slipping, not motion; it can point along motion
30aDisplacement is frame-dependent; gravity is conservative

Chapter 1 revision sheet

One-page summary

  • Work is done only when a force has a component along the displacement of its point of application.

  • Constant force: W = F s cos θ = F · s = Fₓx + Fᵧy + F_z z.

  • Work is a scalar. It is positive for θ < 90°, zero at 90°, negative for θ > 90°.

  • SI unit: joule (1 J = 1 N m). CGS unit: erg (1 J = 10⁷ erg). Dimensions [ML²T⁻²].

  • Other units: 1 eV = 1.6 × 10⁻¹⁹ J; 1 kWh = 3.6 × 10⁶ J.

  • Variable force: W = ∫ F dx, the signed area under the F–x graph.

  • Gravity: W = −mgh going up by h, +mgh coming down. It depends only on the height change.

  • Kinetic friction on a fixed floor: W = −μₖ N d. It always takes energy out.

  • Static friction can do positive work, e.g. on a box riding on an accelerating truck.

  • Spring force F = −kx; work by the spring from x₁ to x₂ = ½k(x₁² − x₂²).

  • Centripetal force, normal force on a fixed surface and tension in a pendulum string do zero work.

  • Normal force can do work when the surface moves, e.g. the floor of a lift.

  • Work depends on the frame of reference, because displacement does.

  • Net work = sum of works by all forces = work by the net force.

Must-remember table

QuantityFormula or valueUnit / note
Work, constant forceW = F s cos θJ
Work, vector formW = Fₓx + Fᵧy + F_z zJ
Work, variable forceW = ∫ F dxArea under F–x graph
Work by gravity∓ mghPath-independent
Work by kinetic friction−μₖ N dAlways negative on a fixed floor
Work by spring½k(x₁² − x₂²)Negative when stretched further
1 kWh3.6 × 10⁶ JUnit of energy
1 eV1.6 × 10⁻¹⁹ JUnit of energy
1 J10⁷ ergCGS link

Memory aids

  • "FDC" for work: Force, Displacement, Cosine. Miss any one and the work is zero.

  • "Ninety means nothing": a force at 90° to the motion (centripetal pull, pendulum string) does no work.

  • "Area is work": on an F–x graph, area means work; on an F–t graph, area means impulse. Check the x-axis label first.

  • "Friction FROWNs": Fixed-floor kinetic friction Removes energy, Only ever negative, Works Never in favour.

Concept connections

  • Free-body diagrams and friction rules come from Physics Book 3: Laws of Motion.

  • Dimensions and units of work, and the erg–joule link, tie back to Physics Book 1: Physics and Measurement.

  • Work done by a gas, W = PΔV, returns in Physics Book 8: Thermodynamics and Chemistry Book 4: Chemical Thermodynamics.

Practice MCQs: Chapter 1, Level 4 (new NEET pattern)

31. Match List I (situation) with List II (work done).

  • A. F = (3i + 4j) N moves a body through s = (2i + j) m

  • B. A 10 N force acts at 60° to a 3 m displacement

  • C. A spring of k = 200 N/m is stretched slowly from 0 to 0.1 m (work by the external agent)

  • D. A 2 kg bag is lifted slowly through 1 m

List II: (i) 1 J (ii) 10 J (iii) 15 J (iv) 20 J

(a) A-iii, B-ii, C-iv, D-i (b) A-ii, B-i, C-iii, D-iv (c) A-ii, B-iii, C-i, D-iv (d) A-iv, B-iii, C-i, D-ii

32. Match List I (quantity) with List II (dimensions).

  • A. Work

  • B. Power

  • C. Spring constant

  • D. Force

List II: (i) [MLT⁻²] (ii) [MT⁻²] (iii) [ML²T⁻²] (iv) [ML²T⁻³]

(a) A-iii, B-iv, C-ii, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-iii, B-iv, C-i, D-ii (d) A-ii, B-iv, C-iii, D-i

33. Match List I (force) with List II (nature of work done by it).

  • A. Gravity on a falling raindrop

  • B. Air drag on the same raindrop

  • C. Tension in a string whirling a stone in a horizontal circle

  • D. Static friction on a crate resting on the floor of an accelerating truck (ground frame)

List II: (i) zero (ii) positive, by a contact force (iii) negative (iv) positive, by a field force

(a) A-ii, B-iii, C-i, D-iv (b) A-iv, B-i, C-iii, D-ii (c) A-iv, B-iii, C-ii, D-i (d) A-iv, B-iii, C-i, D-ii

34. Match List I (force along x, x in m) with List II (work done).

  • A. F = 2x N from x = 0 to x = 2 m

  • B. F = 3x² N from x = 0 to x = 2 m

  • C. F = 6 N (constant) from x = 0 to x = 2 m

  • D. F = 4/x² N from x = 1 m to x = 2 m

List II: (i) 2 J (ii) 4 J (iii) 8 J (iv) 12 J

(a) A-iii, B-ii, C-iv, D-i (b) A-ii, B-iii, C-iv, D-i (c) A-ii, B-iv, C-iii, D-i (d) A-i, B-iii, C-iv, D-ii

35. How many of the following statements are correct?

  • A. Work is a scalar quantity.

  • B. The work done by a force can be different in two frames of reference.

  • C. Static friction never does work.

  • D. The normal force never does work.

  • E. 1 kWh = 3.6 × 10⁶ J.

(a) 2 (b) 4 (c) 3 (d) 5

36. A box is pulled at constant velocity across a rough level floor by a rope at an angle to the floor. Choose the correct set of statements.

  • A. The net work done on the box is zero.

  • B. The work done by the rope equals the magnitude of the work done by friction.

  • C. The work done by gravity is negative.

  • D. The work done by the normal force is positive.

(a) A and C only (b) B and D only (c) A, B and C only (d) A and B only

37. Choose the correct set of statements about an ideal spring.

  • A. When a spring is stretched from its natural length, the work done by the spring is negative.

  • B. The work done by the spring from extension x₁ to x₂ is ½k(x₁² − x₂²).

  • C. Stretching it from 0 to x needs the same work as stretching it from x to 2x.

  • D. The work done by the spring over a complete stretch-and-return cycle is zero.

(a) A, B and D only (b) A and C only (c) B, C and D only (d) All of A, B, C and D

38. How many of the following statements are correct?

  • A. Area of an F–x graph above the x-axis gives positive work.

  • B. Area under an F–t graph gives the work done.

  • C. For F = −kx, the area of the F–x graph from 0 to x is −½kx².

  • D. If the F–x graph is a straight line through the origin, the work grows in direct proportion to x.

(a) 1 (b) 2 (c) 3 (d) 4

39. A force acts along the x-axis. Its F–x graph rises in a straight line from 0 at x = 0 to 10 N at x = 2 m, stays at 10 N up to x = 5 m, then falls in a straight line to −5 N at x = 8 m. The work done from x = 0 to x = 8 m is

(a) 50 J (b) 42.5 J (c) 52.5 J (d) 47.5 J

40. The table gives four cases of a constant force acting on a body (take cos 37° = 0.8).

CaseForce (N)Displacement (m)Angle between them
P2050°
Q40460°
R50337°
S306120°

The correct order of work done is

(a) P > R > Q > S (b) R > P > Q > S (c) R > Q > P > S (d) Q > R > P > S

41. The F–x graph of a force is a semicircle above the x-axis, from x = 0 to x = 4 m, with its highest point F = 2 N at x = 2 m (the scales make it a true semicircle of radius 2 units, 1 unit = 1 N on the F-axis and 1 m on the x-axis). The work done from x = 0 to x = 4 m is

(a) 4π J (b) π J (c) 2π J (d) 8 J

Passage for Q42–43: A 60 kg porter at a railway station carries a 20 kg suitcase on his head. He climbs a staircase of 30 steps, each 0.2 m high, at constant speed. He then walks 50 m along the level platform at constant speed.

42. The work done by the porter on the suitcase during the climb is

(a) 1200 J (b) 4800 J (c) 6000 J (d) 120 J

43. The work done by the porter on the suitcase during the 50 m walk on the platform is

(a) 10,000 J (b) 1000 J (c) 200 J (d) zero

44. A force F = (2xy i + x² j) N acts on a particle (x, y in m). The work done by this force when the particle moves from (0, 0) to (1, 2) is

(a) 4 J (b) 2 J (c) 6 J (d) different for every path, so it cannot be found

45. A 5 kg box rests on the floor of a lift. The lift moves up 4 m with a constant acceleration of 2 m/s². The work done by the normal force on the box is

(a) 240 J (b) 200 J (c) 160 J (d) zero

Level 4 answer key

QAnsReason
31cA: 6 + 4 = 10 J; B: 10 × 3 × 0.5 = 15 J; C: ½ × 200 × 0.01 = 1 J; D: 2 × 10 × 1 = 20 J
32aWork [ML²T⁻²], power [ML²T⁻³], k = F/x gives [MT⁻²], force [MLT⁻²]
33dGravity (field) helps the fall; drag opposes; tension is at 90°; static friction pushes the crate forward
34bx² gives 4 J; x³ gives 8 J; 6 × 2 = 12 J; 4(1 − ½) = 2 J
35cA, B, E true; static friction and normal force can do work (truck, lift)
36dNet work zero at constant velocity; gravity and normal force are perpendicular to motion, so zero
37aC is false: 0 to x costs ½kx², x to 2x costs 3 × ½kx²
38bA and C true; F–t area is impulse; work ∝ x² for a straight line through origin
39d10 + 30 + 10 − 2.5 = 47.5 J (graph crosses zero at x = 7 m)
40bP 100 J, Q 80 J, R 120 J, S −90 J
41cArea = ½πr² = ½π(2)² = 2π J
42aRise = 30 × 0.2 = 6 m; W = 20 × 10 × 6 = 1200 J; 4800 J wrongly adds his own mass
43dHis force on the suitcase is vertical, the displacement is horizontal
44bForce is conservative with U = −x²y; W = x²y from (0, 0) to (1, 2) = 2 J
45aN = m(g + a) = 60 N; W = 60 × 4 = 240 J
29 min left
‹
›