Chapter 5: Power
What you will learn
The difference between average and instantaneous power.
Why power equals F · v, and how to use it for moving vehicles.
Units of power, and why kWh is a unit of energy, not power.
Power needed by pumps, lifts and vehicles on slopes.
Motion under constant force and under constant power.
5.1 Average and instantaneous power
Two boys carry identical 20 kg rice bags up to a third-floor flat. One takes 30 seconds, the other takes 2 minutes. Both do the same work against gravity. The first one is more powerful, because he does it faster.
Power is the rate of doing work.
Average power uses the total work over the total time. Instantaneous power is the rate at one moment. On a W-t graph, instantaneous power is the slope of the curve at that moment.
Power is a scalar, like work.
5.2 Power as force times velocity
In a tiny time dt, a force F moves its point of application through ds. The work is dW = F · ds. Divide by dt:
This is the most used power formula in NEET. Some results follow straight away:
A force perpendicular to velocity (like the string tension in uniform circular motion) delivers zero power.
A force opposing velocity (like friction or drag) delivers negative power. It removes energy.
For a vehicle, the engine's driving force at speed v is F = P/v. At low speed, the same power gives a large force. That is why trucks climb ghat roads in low gear and at low speed.
5.3 Units
The SI unit of power is the watt (W). 1 W = 1 J/s. Its dimensions are [ML²T⁻³].
| Unit | Value | Used for |
|---|---|---|
| watt (W) | 1 J/s | SI unit |
| kilowatt (kW) | 1000 W | Motors, pumps, cars |
| horsepower (hp) | 746 W | Engines, pump-sets, tractors |
The kilowatt hour is a unit of energy, not power. It is the energy used by a 1 kW device in 1 hour: 1 kWh = 1000 W × 3600 s = 3.6 × 10⁶ J. One "unit" on an electricity bill is 1 kWh. A 1.5 ton air conditioner drawing 1.5 kW for 8 hours uses 12 units.
5.4 Power in practical problems
Lifting at steady speed. To lift a mass m at constant speed v, the force needed is mg, so P = mgv. For a load lifted through height h in time t, P = mgh/t.
Pumps. A pump lifts water of mass m through height h in time t. It may also throw the water out at speed v. The useful power is:
Here m/t is the mass flow rate in kg/s. One litre of water has a mass of 1 kg.
Vehicles at steady speed. At constant speed the net force is zero. The engine force equals the total opposing force. On a slope of angle θ with resistance f:
For small slopes, "1 in n" means sin θ = 1/n.
Maximum speed. An engine with maximum power P reaches its top speed when its driving force equals the resistance. If the resistance is a constant f, v_max = P/f. If the resistance grows with speed, say f = bvⁿ, then P = bvⁿ⁺¹.
Efficiency. No machine turns all input power into useful output. Efficiency η = output power / input power, usually given as a percentage. A pump with 80% efficiency needs 1.25 times the useful power as input.
5.5 Constant force versus constant power
Constant force from rest. Acceleration a = F/m is constant, so v = at. The power is:
Power grows in step with time. The average power over the time t is half the final power.
Constant power from rest. All the work goes into kinetic energy: Pt = ½mv². So:
So under constant power, v grows as √t and distance grows as t^(3/2). The force P/v keeps falling as the body speeds up.
| Quantity | Constant force from rest | Constant power from rest |
|---|---|---|
| Acceleration | Constant | Falls with time |
| Speed v | ∝ t | ∝ t^(1/2) |
| Distance s | ∝ t² | ∝ t^(3/2) |
| Power P | ∝ t | Constant |
Worked example 5.1: A 40 kg girl runs up a staircase 3 m high in 6 s. Find her average power.
Solution: W = mgh = 40 × 10 × 3 = 1200 J. P = 1200 / 6 = 200 W.
Worked example 5.2: A car engine provides a driving force of 2000 N while the car moves at 25 m/s. Find the power delivered.
Solution: P = Fv = 2000 × 25 = 50000 W = 50 kW (about 67 hp).
Worked example 5.3: A farm pump lifts 600 kg of water per minute through 20 m. Find the useful power. If the pump is 80% efficient, find its input power.
Solution: Useful power = mgh/t = 600 × 10 × 20 / 60 = 2000 W. Input = 2000 / 0.8 = 2500 W = 2.5 kW.
Worked example 5.4: A pump raises water through 15 m and throws it out at 10 m/s. It delivers 2 kg of water per second. Find the power it supplies to the water.
Solution: P = (m/t)(gh + ½v²) = 2 × (10 × 15 + ½ × 100) = 2 × 200 = 400 W.
Worked example 5.5: A 1000 kg car climbs a slope of 1 in 20 at a steady 20 m/s. Road and air resistance total 500 N. Find the engine power.
Solution: Component of weight along the slope = mg sin θ = 1000 × 10 × (1/20) = 500 N. Engine force = 500 + 500 = 1000 N. P = 1000 × 20 = 20000 W = 20 kW.
Worked example 5.6: A constant force of 4 N acts on a 2 kg body at rest. Find (a) the power at t = 3 s, (b) the average power over the first 3 s.
Solution: a = 2 m/s², so v = 6 m/s at t = 3 s. (a) P = Fv = 4 × 6 = 24 W. (b) Work done = K = ½ × 2 × 36 = 36 J. Average power = 36 / 3 = 12 W, half of the final power.
Worked example 5.7: A force F = (2i + 3j − k) N acts on a particle moving with velocity v = (4i − j + 2k) m/s. Find the power.
Solution: P = F · v = 8 − 3 − 2 = 3 W.
Worked example 5.8: A 1000 kg car starts from rest. Its engine delivers a constant 10 kW. Ignoring losses, find its speed after 5 s.
Solution: Pt = ½mv² gives 10000 × 5 = ½ × 1000 × v². So v² = 100 and v = 10 m/s.
Worked example 5.9 (NEET-hard): The resistance on a motorboat is 12v newton, where v is its speed in m/s. Its engine delivers 4800 W. Find its top speed. What power would double the top speed?
Solution: At top speed, engine force P/v equals resistance 12v. So P = 12v², v² = 4800 / 12 = 400 and v = 20 m/s. Since P ∝ v² here, doubling v needs four times the power: 19200 W = 19.2 kW.
Quick revision
P_avg = W/t; P = dW/dt = F · v = Fv cos θ.
1 W = 1 J/s; 1 hp = 746 W; [P] = [ML²T⁻³].
1 kWh = 3.6 × 10⁶ J is an energy unit.
Pump: P = (m/t)(gh + ½v²). Vehicle on slope: P = (mg sin θ + f)v.
Top speed: driving force P/v = resistance.
Constant force from rest: P ∝ t, average = half the final.
Constant power from rest: v ∝ t^(1/2), s ∝ t^(3/2).
NEET traps
Calling kWh a unit of power.
Using P = mgh/t for a pump that also gives speed to the water. Add the ½v² term.
Forgetting to divide by efficiency when the question asks for input power.
Taking the average power under constant force equal to the final power. It is half.
Using P = Fv with F as the net force at constant speed. At constant speed, F is the engine force, which balances resistance.
Assuming the speed doubles when the power doubles. It depends on how resistance varies with speed.
Practice MCQs: Chapter 5
Level 1: Concept check
1. The SI unit of power is the (a) joule (b) watt (c) newton (d) kilowatt hour
2. One horsepower is about (a) 746 W (b) 1000 W (c) 550 W (d) 7.46 W
3. The dimensional formula of power is (a) [ML²T⁻²] (b) [MLT⁻³] (c) [ML²T⁻¹] (d) [ML²T⁻³]
4. The instantaneous power delivered by a force F to a body moving with velocity v is (a) F × v (b) F/v (c) F · v (d) Fv²
5. The kilowatt hour is a unit of (a) power (b) energy (c) force (d) momentum
6. A machine does 600 J of work in 2 minutes. Its average power is (a) 5 W (b) 300 W (c) 50 W (d) 1200 W
7. A 50 N force acts on a body moving at 4 m/s in the direction of the force. The power delivered is (a) 12.5 W (b) 54 W (c) 200 W (d) 46 W
8. A 1.5 kW heater runs for 4 hours. The energy used, in kWh, is (a) 1.5 (b) 0.375 (c) 60 (d) 6
9. Power is a (a) vector along the force (b) scalar (c) vector along the velocity (d) dimensionless number
10. A force acts at right angles to the velocity of a body. The power it delivers is (a) Fv (b) maximum (c) zero (d) negative
Level 2: NEET standard
11. A 60 kg man climbs a 10 m high staircase in 20 s. His average power is (a) 300 W (b) 600 W (c) 30 W (d) 3000 W
12. A pump lifts 1200 kg of water per minute through 15 m. If it is 75% efficient, its input power is (a) 3 kW (b) 4 kW (c) 2.25 kW (d) 5 kW
13. A car moves at a steady 72 km/h against a total resistance of 1500 N. The engine power is (a) 108 kW (b) 75 kW (c) 30 kW (d) 3 kW
14. A constant force of 6 N acts on a 2 kg body starting from rest. The power at t = 4 s is (a) 36 W (b) 72 W (c) 144 W (d) 24 W
15. For the body in Q14, the average power over the first 4 s is (a) 36 W (b) 72 W (c) 18 W (d) 144 W
16. A car's engine delivers 40 kW at its top speed of 20 m/s. The resistance (assumed constant) is (a) 800 N (b) 4000 N (c) 1000 N (d) 2000 N
17. A force F = (3i + 4j) N acts on a particle moving with velocity v = (2i − j + 5k) m/s. The power is (a) 10 W (b) 2 W (c) 26 W (d) 14 W
18. A 1200 kg car climbs a slope of 1 in 30 at a steady 15 m/s against a resistance of 200 N. The engine power is (a) 6 kW (b) 3 kW (c) 9 kW (d) 12 kW
19. A pump at ground level throws out 5 kg of water per second at 4 m/s. The power it supplies to the water is (a) 80 W (b) 20 W (c) 10 W (d) 40 W
20. The work done on a body varies with time as W = (3t² + 2t) J. The power at t = 2 s is (a) 14 W (b) 16 W (c) 8 W (d) 12 W
21. A lift of total mass 1500 kg moves up at a steady 2 m/s. The frictional force on it is 3000 N. The motor power is (a) 30 kW (b) 6 kW (c) 36 kW (d) 48 kW
22. A motor draws 2 kW and lifts 100 kg through 12 m in 10 s at steady speed. Its efficiency is (a) 40% (b) 60% (c) 75% (d) 50%
Level 3: Challenge
23. A body starts from rest and is driven by a machine that delivers constant power. Its displacement s varies with time t as (a) s ∝ t (b) s ∝ t^(1/2) (c) s ∝ t^(3/2) (d) s ∝ t²
24. The resistance on a boat is proportional to its speed. To double its top speed, the engine power must be multiplied by (a) 2 (b) 4 (c) √2 (d) 8
25. The air drag on a car is proportional to the square of its speed, and other resistance is negligible. To double its top speed, the power must be multiplied by (a) 4 (b) 2 (c) 16 (d) 8
26. A 1000 kg car starts from rest with its engine delivering a constant 20 kW. Ignoring losses, its speed after 10 s is (a) 20 m/s (b) 10 m/s (c) 40 m/s (d) 14.1 m/s
27. A car of mass m with constant engine power P has a top speed v on a level road against a constant resistance. Its acceleration when its speed is v/2 is (a) 2P/(mv) (b) P/(mv) (c) P/(2mv) (d) 3P/(mv)
28. Sand drops at 2 kg/s onto a conveyor belt moving at a steady 3 m/s. The extra power needed to keep the belt moving at the same speed is (a) 9 W (b) 36 W (c) 18 W (d) 6 W
29. Assertion (A): When a constant force acts on a body starting from rest, the average power over a time t is half the power at time t. Reason (R): Under a constant force from rest, the velocity grows in direct proportion to time. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: The kilowatt hour is a unit of power. Statement II: One kilowatt hour equals 3.6 × 10⁶ J. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | b | 1 W = 1 J/s |
| 2 | a | 1 hp = 746 W |
| 3 | d | [ML²T⁻²]/[T] |
| 4 | c | P = F · v, a scalar product |
| 5 | b | kW × h = energy |
| 6 | a | 600 / 120 = 5 W |
| 7 | c | 50 × 4 = 200 W |
| 8 | d | 1.5 × 4 = 6 kWh |
| 9 | b | Dot product of two vectors |
| 10 | c | cos 90° = 0 |
| 11 | a | 6000 J / 20 s |
| 12 | b | Useful 3 kW; 3 / 0.75 = 4 kW |
| 13 | c | 1500 × 20 = 30 kW |
| 14 | b | v = 3 × 4 = 12 m/s; 6 × 12 |
| 15 | a | K = 144 J over 4 s |
| 16 | d | 40000 / 20 = 2000 N |
| 17 | b | 6 − 4 + 0 = 2 W |
| 18 | c | (400 + 200) × 15 = 9000 W |
| 19 | d | ½ × 5 × 16 = 40 W |
| 20 | a | dW/dt = 6t + 2 = 14 W |
| 21 | c | (15000 + 3000) × 2 = 36 kW |
| 22 | b | Output 1200 W of 2000 W |
| 23 | c | v ∝ t^(1/2), so s ∝ t^(3/2) |
| 24 | b | P = bv² |
| 25 | d | P = cv³ |
| 26 | a | v² = 2Pt/m = 400 |
| 27 | b | Engine force 2P/v minus resistance P/v |
| 28 | c | F = v(dm/dt) = 6 N; P = 6 × 3 |
| 29 | a | P = F²t/m is linear in t, so average is half |
| 30 | d | kWh is energy; 1000 × 3600 J |
Chapter 5 revision sheet
One-page summary
Power is the rate of doing work: P = dW/dt. It is a scalar.
Average power = total work ÷ total time.
Instantaneous power P = F · v = Fv cos θ.
SI unit watt: 1 W = 1 J/s. Dimensions [ML²T⁻³].
1 horsepower (hp) = 746 W. 1 kW = 1000 W.
kWh is a unit of energy: 1 kWh = 3.6 × 10⁶ J. Bills count "units" in kWh.
Area under a P–t graph gives work done.
Pump lifting water: P = (mass per second) × g × h, plus ½ × (mass per second) × v² if the water leaves with speed v.
Efficiency η = useful output power ÷ input power, always less than 1 (100%).
Vehicle at constant speed: engine force = total resistance, so P = (resistance) × v.
Up an incline at constant speed: P = (mg sin θ + resistance) × v.
Maximum speed at a given power: v(max) = P ÷ resistance.
Constant power from rest: v ∝ t^½, x ∝ t^(3/2).
Constant force from rest: P ∝ t and P ∝ √x.
Must-remember table
| Quantity | Formula or value | Note |
|---|---|---|
| Average power | P = W/t | W |
| Instantaneous power | P = F · v | Can be negative (braking) |
| Horsepower | 1 hp = 746 W | Engine ratings |
| kWh | 3.6 × 10⁶ J | Energy, not power |
| Pump power | P = (m/t) g h | Add ½(m/t)v² for exit speed |
| Efficiency | η = P(out)/P(in) | Less than 1 |
| Vehicle on incline | P = (mg sin θ + f) v | Constant speed |
| Constant power motion | v ∝ t^½, x ∝ t^(3/2) | From rest |
| Dimensions | [ML²T⁻³] | Same as J/s |
Memory aids
"P is Force times Velocity": read P = Fv like a fan's rating: more push or more speed means more power.
"kWh = kilo-Watt-hours = energy": watt × hour is power × time, so it is energy. 1 unit = 1000 × 3600 J.
"Horse 746": picture a horse carrying a 746 number plate.
"Half and three-halves": constant power gives v ∝ t to the half, x ∝ t to the three-halves.
Concept connections
Electric power P = VI = I²R and household energy bills are developed in Physics Book 12: Current Electricity.
Power transmitted by a wave and intensity of light link to Physics Book 10: Oscillations and Waves and Physics Book 15: Electromagnetic Waves.
Rotational power P = τω appears in Physics Book 5: Rotational Motion.
Practice MCQs: Chapter 5, Level 4 (new NEET pattern)
31. Match List I with List II.
A. 1 horsepower
B. 1 kilowatt-hour
C. Dimensions of power
D. SI unit of power in base form
List II: (i) 3.6 × 10⁶ J (ii) 746 W (iii) [ML²T⁻³] (iv) J s⁻¹
(a) A-ii, B-i, C-iv, D-iii (b) A-i, B-ii, C-iii, D-iv (c) A-ii, B-iii, C-i, D-iv (d) A-ii, B-i, C-iii, D-iv
32. Match List I (situation) with List II (power).
A. A pump lifts 600 kg of water per minute to a height of 10 m
B. A car moves at 20 m/s against a resistance of 500 N
C. A 50 kg girl runs up 4 m of stairs in 5 s
D. A motor of 80% efficiency gives a useful output of 2 kW; its input
List II: (i) 400 W (ii) 1 kW (iii) 2.5 kW (iv) 10 kW
(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-iv, C-iii, D-i (d) A-i, B-iv, C-ii, D-iii
33. A body starts from rest. Match List I with List II.
A. Speed against time, under constant power
B. Distance against time, under constant power
C. Power against time, under constant force
D. Power against distance, under constant force
List II: (i) proportional to t (ii) proportional to t^½ (iii) proportional to t^(3/2) (iv) proportional to x^½
(a) A-iii, B-ii, C-i, D-iv (b) A-ii, B-iii, C-iv, D-i (c) A-ii, B-iii, C-i, D-iv (d) A-i, B-iii, C-ii, D-iv
34. Match List I (appliance use) with List II (energy in kWh).
A. A 100 W bulb for 10 h
B. A 2 kW air conditioner for 3 h
C. A 60 W ceiling fan for 24 h
D. A 1.5 kW geyser for 20 min
List II: (i) 0.5 (ii) 1 (iii) 1.44 (iv) 6
(a) A-ii, B-iii, C-iv, D-i (b) A-ii, B-iv, C-iii, D-i (c) A-i, B-iv, C-iii, D-ii (d) A-iv, B-ii, C-iii, D-i
35. How many of the following statements are correct?
A. Power is a scalar.
B. Instantaneous power is F · v.
C. Average power is the total work divided by the total time.
D. The watt-hour is a unit of power.
E. The kilowatt-hour is a unit of energy.
(a) 2 (b) 3 (c) 5 (d) 4
36. A truck climbs a hill at constant speed with its engine at constant power. Choose the correct set of statements.
A. The tractive force of the engine is constant.
B. If it slows to half the speed at the same power, the tractive force doubles.
C. The rate of change of its kinetic energy is zero.
D. Even with air drag, the engine power equals mgv sin θ.
(a) A, B and C only (b) A and D only (c) B, C and D only (d) All of A, B, C and D
37. A stone is thrown at an angle above the horizontal (no air drag). Choose the correct set of statements about the power delivered by gravity.
A. It is zero at the highest point.
B. It is negative on the way up.
C. It is constant throughout the flight.
D. On the way down it increases in proportion to the time since the highest point.
(a) A and C only (b) B and C only (c) A, B and D only (d) C and D only
38. How many of the following statements are correct?
A. A well-oiled machine can have an efficiency above 100%.
B. A machine of higher power finishes a given job faster.
C. 1 W = 1 J/s.
D. The area under a P–t graph gives the work done.
(a) 2 (b) 3 (c) 4 (d) 1
39. The P–t graph of a motor rises in a straight line from 0 at t = 0 to 100 W at t = 4 s, then stays at 100 W up to t = 10 s. The work done in 10 s and the average power are
(a) 1000 J, 100 W (b) 600 J, 60 W (c) 800 J, 100 W (d) 800 J, 80 W
40. The table shows the tractive force of a car engine working at constant power.
| Speed (m/s) | 10 | 20 | 30 |
|---|---|---|---|
| Tractive force (N) | 3000 | 1500 | 1000 |
On a level road with a total resistance of 1200 N, the maximum speed of the car is
(a) 25 m/s (b) 30 m/s (c) 20 m/s (d) 36 m/s
41. The v–t graph of a 1000 kg car on a level road with negligible resistance is a straight line from 0 at t = 0 to 20 m/s at t = 10 s. The power at t = 5 s and the average power over the first 10 s are
(a) 10 kW, 20 kW (b) 20 kW, 20 kW (c) 20 kW, 40 kW (d) 40 kW, 20 kW
Passage for Q42–43: A hostel pump fills an overhead tank. It lifts 1500 L of water (1 L has a mass of 1 kg) through 20 m in 10 minutes. The pump-motor set is 75% efficient. Ignore the speed of the water at the outlet.
42. The useful output power of the pump is
(a) 50 W (b) 300 W (c) 500 W (d) 5000 W
43. The electrical input power of the motor is about
(a) 375 W (b) 500 W (c) 750 W (d) 667 W
44. A 1200 kg car climbs a slope with sin θ = 1/20 at a steady 15 m/s. Air drag and rolling friction together are 400 N. The power delivered by the engine is
(a) 15 kW (b) 9 kW (c) 6 kW (d) 24 kW
45. A 2 kg body starts from rest on a smooth floor. A machine delivers a constant power of 16 W to it. Its speed after 2 s is
(a) 4 m/s (b) 4√2 m/s (c) 8 m/s (d) 2√2 m/s
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | d | 1 hp = 746 W; 1 kWh = 3.6 MJ; [ML²T⁻³]; W = J/s |
| 32 | a | 600 × 10 × 10/60 = 1 kW; 500 × 20 = 10 kW; 2000/5 = 400 W; 2/0.8 = 2.5 kW |
| 33 | c | Pt = ½mv² gives v ∝ t^½ and x ∝ t^(3/2); constant F: P = F × at, and v ∝ √x |
| 34 | b | 1 kWh; 6 kWh; 0.06 × 24 = 1.44 kWh; 1.5 × ⅓ = 0.5 kWh |
| 35 | d | Only D is false: watt-hour is energy |
| 36 | a | F = P/v, constant at constant v; drag adds to the needed power, so D is false |
| 37 | c | P = mg v(y) changes sign at the top; v(y) grows as g × time on the way down |
| 38 | b | B, C, D true; no real machine exceeds 100% |
| 39 | d | W = ½ × 4 × 100 + 6 × 100 = 800 J; 800/10 = 80 W |
| 40 | a | P = Fv = 30 kW from every column; v(max) = 30000/1200 = 25 m/s |
| 41 | b | a = 2 m/s², F = 2000 N, P(5 s) = 2000 × 10 = 20 kW; average = 2 × 10⁵ J/10 s = 20 kW |
| 42 | c | 1500 × 10 × 20 / 600 = 500 W |
| 43 | d | 500/0.75 ≈ 667 W |
| 44 | a | F = 1200 × 10/20 + 400 = 1000 N; P = 1000 × 15 = 15 kW |
| 45 | b | Pt = ½mv²: 32 = v², v = 4√2 m/s |