Chapter 2 of 11 · 4 min read

Exam Strategy

Work, Energy and Power usually gives 2–3 NEET questions a year, and its ideas also power questions on collisions, circular motion and gravitation. Study it formula-first, then solve by energy accounting: list every force, find its work, and let the work-energy theorem do the rest.

Chapter weightage and priority

ChapterTypical NEET questionsPriorityWhy
1. Work0–1MediumDot-product and F–x area questions are quick marks
2. Kinetic Energy and the Work-Energy Theorem1HighK–p relation and stopping-distance ratios appear often
3. Potential Energy, Conservative and Non-conservative Forces0–1MediumU–x graphs, F = −dU/dx and equilibrium type
4. Spring Potential Energy and Conservation of Mechanical Energy0–1HighSpring compression and energy-conservation numericals
5. Power0–1MediumP = Fv, pumps, motors and constant-power motion
6. Motion in a Vertical Circle0–1High√(gR), √(5gR) and 6mg tension results are favourites
7. Collisions1HighElastic and inelastic 1D results, coefficient of restitution

Weightage is approximate, based on recent papers; NEET can ask from any part of the syllabus.

High-yield topics

  • Work by a constant force: W = F · s with vectors in i, j, k form; sign of work for friction, gravity and normal force.

  • Work from an F–x graph: signed area, with parts below the axis counted negative.

  • Variable force work: integrate F dx for forces like kx, ax² or k/x².

  • K–p relation: K = p²/2m; ratios of K or p for equal momentum or equal energy; percentage changes.

  • Work-energy theorem: stopping distance ∝ v², bullets through planks, work done by friction found from speed change.

  • Potential energy and force: F = −dU/dx, equilibrium points and their stability on a U–x graph.

  • Spring energy: ½kx², work from x₁ to x₂, maximum compression when a moving block hits a spring.

  • Mechanical energy conservation: speed at a lower point, height where KE = n × PE, block dropped onto a spring.

  • Power: P = F · v, pump and motor power with efficiency, kWh bills, constant-power motion (v ∝ t^½).

  • Vertical circle: minimum speeds at top and bottom, tension difference 6mg, where the string slackens.

  • 1D collisions: velocities after elastic collision, velocity exchange for equal masses, KE loss in perfectly inelastic collision.

  • Coefficient of restitution: bounce height e²h, e from heights, fraction of KE lost.

Question types to expect

TypeWhat it looks likeHow to approach
NumericalFind speed, work, compression, power or KE lossWrite one energy or momentum equation; avoid kinematics when energy is shorter
ConceptualSign of work, which force is conservative, what is conservedPicture the force and displacement; test with a simple case
Statement-based"How many of the following are correct?"Mark each line T or F separately before looking at options
Match-the-columnFour situations matched to four values or lawsFix the surest pair first, then eliminate options
Assertion–ReasonA claim plus a supposed causeJudge A and R alone first; then ask "does R explain A?"
Graph/diagram-basedF–x, U–x, P–t, K–x or v–t graphsArea or slope gives the answer; read units on both axes

Study plan

DayWhat to studyPractice target
1Chapter 1: work by constant and variable forces, F–x graphsWorked examples + Level 1–2 MCQs
2Chapter 2: kinetic energy, K–p relation, work-energy theoremLevel 1–3 MCQs, ratio questions timed
3Chapter 3: potential energy, conservative forces, U–x graphsLevel 1–3 MCQs + 5 graph questions
4Chapter 4: spring energy and conservation of mechanical energyLevel 1–3 MCQs, all spring numericals
5Chapter 5: power; Chapter 6: vertical circleLevel 1–3 MCQs of both chapters
6Chapter 7: collisions in one and two dimensionsLevel 1–3 MCQs + Level 4 sets of Chapters 1–4
7Unit test (50 min), Level 4 sets of Chapters 5–7, revision sheetsScore 140+/180 in the unit test; redo every wrong one

Last 48 hours:

  1. Day −2: read every chapter's revision sheet and the book-at-a-glance sheet; redo only the MCQs you marked wrong.

  2. Day −1: take Mock Test 2 in 35 minutes, then go through the common mistakes checklist.

  3. Exam morning: read the 40 rapid-fire facts once; no new problems.

Time-saving tricks

  • K–p shortcut: for small changes, % change in K ≈ 2 × % change in p (or in v). For big changes use K ∝ p²: a 10% rise in p gives a 21% rise in K.

  • Stopping distance: with the same braking force, d ∝ v². Double the speed, four times the distance. With the same deceleration, mass does not matter.

  • Vertical circle (string): remember three results: √(gR) at the top, √(5gR) at the bottom, and T(bottom) − T(top) = 6mg for any speed that completes the circle.

  • Equal masses, elastic, head-on: velocities simply swap. A heavy body hitting a light one at rest sends it off at nearly 2u.

  • Perfectly inelastic, target at rest: fraction of KE lost = m₂/(m₁ + m₂). Equal masses lose half.

  • Bouncing ball: height after n bounces = e^(2n) × h, and e = √(h₁/h₀) from two heights.

  • Constant power from rest: v ∝ t^½ and x ∝ t^(3/2). Constant force from rest: P ∝ t.

  • Spring work: work by the spring from x₁ to x₂ = ½k(x₁² − x₂²). Stretching from x to 2x costs three times the work of 0 to x.

4 min left
‹
›