Chapter 8 of 12 · 25 min read

Chapter 6: Thermal Expansion

What you will learn

  • The difference between heat and temperature, and how the Celsius, Fahrenheit and Kelvin scales relate.

  • Linear, area and volume expansion, and why β = 2α and γ = 3α.

  • Expansion of liquids (real and apparent) and of an ideal gas.

  • The anomalous expansion of water and why ponds freeze from the top.

  • Applications: rail gaps, bimetallic strips, pendulum clocks, thermal stress.

6.1 Heat and temperature

Temperature tells how hot or cold a body is. It decides the direction in which energy flows when two bodies touch. Heat is the energy that flows from a hotter body to a colder one because of the temperature difference. A body does not "contain" heat; it contains internal energy. Heat is energy in transit.

When two bodies in contact stop exchanging heat, they are in thermal equilibrium: they are at the same temperature. A thermometer works on this idea. It reaches the temperature of the body it touches.

Three scales are common:

ScaleIce pointSteam pointDivisions between them
Celsius (°C)0100100
Fahrenheit (°F)32212180
Kelvin (K)273.15373.15100

All scales are linear, so:

tC−0100=tF−32180=T−273.15100\frac{t_C - 0}{100} = \frac{t_F - 32}{180} = \frac{T - 273.15}{100}

So t_F = (9/5)t_C + 32 and T = t_C + 273.15. A change of 1 °C equals a change of 1 K, and equals a change of 1.8 °F. The two scales C and F read the same number at −40.

The Kelvin (absolute) scale starts at absolute zero, 0 K = −273.15 °C, the lowest possible temperature.

6.2 Linear expansion

Most solids get longer when heated. Their atoms vibrate with larger amplitude, and the average spacing grows. For a rod of length L heated through ΔT:

ΔL=α L ΔTL′=L (1+α ΔT)\Delta L = \alpha\,L\,\Delta T \qquad L' = L\,(1 + \alpha\,\Delta T)

The constant α is the coefficient of linear expansion. Its unit is K⁻¹ (same number per °C). Rough values: aluminium 2.3 to 2.5 × 10⁻⁵ K⁻¹, brass 1.8 to 1.9 × 10⁻⁵, copper 1.7 × 10⁻⁵, steel and iron about 1.2 × 10⁻⁵, ordinary glass about 0.9 × 10⁻⁵, Pyrex glass 0.3 × 10⁻⁵, invar (a nickel-steel alloy) only about 0.1 to 0.2 × 10⁻⁵.

6.3 Area and volume expansion

For area and volume, the coefficients are defined the same way:

ΔA=β A ΔTΔV=γ V ΔT\Delta A = \beta\,A\,\Delta T \qquad \Delta V = \gamma\,V\,\Delta T

Link with α. Take a square plate of side L. After heating, each side is L(1 + αΔT). The new area is:

A′=L2(1+αΔT)2=L2 (1+2αΔT+α2ΔT2)≈A (1+2αΔT)A' = L^2 (1 + \alpha\Delta T)^2 = L^2\,(1 + 2\alpha\Delta T + \alpha^2 \Delta T^2) \approx A\,(1 + 2\alpha\Delta T)

The α² term is tiny (about 10⁻⁸) and can be dropped. So β = 2α. A cube gives V' ≈ V(1 + 3αΔT), so γ = 3α. For an isotropic solid:

α:β:γ=1:2:3\alpha : \beta : \gamma = 1 : 2 : 3

A hole or cavity in a solid expands exactly as if it were filled with the same material. Heat a metal ring and the hole gets bigger. That is how a blacksmith fits an iron rim onto a wooden cart wheel: heat the rim, slip it on, let it cool and grip.

Density falls on heating. Mass stays the same while volume grows:

ρ′=ρ1+γ ΔT≈ρ (1−γ ΔT)\rho' = \frac{\rho}{1 + \gamma\,\Delta T} \approx \rho\,(1 - \gamma\,\Delta T)

6.4 Expansion of liquids and gases

Liquids have no fixed shape, so only volume expansion matters. They expand more than solids (γ for mercury is about 1.8 × 10⁻⁴ K⁻¹, about 10 times that of glass).

A liquid is always heated in a vessel, and the vessel also expands. What you see is the apparent expansion. The true expansion is:

γreal=γapparent+γvessel\gamma_{real} = \gamma_{apparent} + \gamma_{vessel}

If a vessel of volume V is filled to the brim and heated by ΔT, the volume that overflows is V(γ_liquid − γ_vessel)ΔT.

For an ideal gas at constant pressure, PV = nRT gives ΔV/V = ΔT/T. So γ = 1/T. At 0 °C, γ = 1/273 K⁻¹, which is much larger than for liquids or solids. Note that γ for a gas depends on temperature.

6.5 Anomalous expansion of water

Water does something unusual. Cool it from room temperature, and it contracts down to 4 °C. Below 4 °C it expands as it cools further to 0 °C. Then on freezing it expands sharply again (ice is less dense, about 917 kg/m³).

So water is densest at 4 °C. This matters for life:

  1. In winter, the surface water of a lake cools and sinks, until the whole lake is at 4 °C.

  2. Further cooling makes surface water lighter, so it stays on top, cools to 0 °C and freezes.

  3. Ice floats and insulates the water below. The bottom stays near 4 °C, and fish survive.

The same expansion on freezing is why water pipes burst on cold Himalayan nights and why a glass bottle of water cracks in the freezer.

6.6 Applications and thermal stress

Gaps in rails and bridges. Rails are laid with small gaps, and long bridges rest on rollers, so they can expand in summer without bending.

Bimetallic strip. Two metals with different α (brass and iron, say) are riveted together. On heating, the strip bends with the higher-α metal on the outer (convex) side. On cooling it bends the other way. Electric irons, room-heater thermostats and fire alarms use this to make or break a circuit.

Pendulum clocks. The time period T = 2π√(L/g) grows as the rod expands. For a rise Δθ:

ΔTT=12 α Δθ\frac{\Delta T}{T} = \frac{1}{2}\,\alpha\,\Delta\theta

In summer the clock runs slow (loses time); in winter it runs fast. The time lost or gained in a day is ½ α Δθ × 86 400 s.

Measuring scales. A metal scale calibrated at one temperature reads too little when hot, because its marks spread apart. True length = scale reading × (1 + αΔT), where ΔT is the rise above the calibration temperature.

Thermal stress. If a rod is clamped so it cannot expand, heating creates a compressive strain equal to the expansion it was denied, αΔT. By Hooke's law:

Thermal stress=Y α ΔTF=YAα ΔT\text{Thermal stress} = Y\,\alpha\,\Delta T \qquad F = Y A \alpha\,\Delta T

Note that the stress does not depend on the length of the rod.

Constant difference in length. Two rods of different metals keep the same difference in length at all temperatures if they expand by the same amount: L₁α₁ = L₂α₂.

Worked example 6.1: Normal body temperature is 98.6 °F. Express it in °C and K.

Solution: t_C = (98.6 − 32) × 5/9 = 37 °C. T = 37 + 273.15 = 310.15 K.

Worked example 6.2: A steel rail 10 m long (α = 1.2 × 10⁻⁵ K⁻¹) warms by 40 °C on a summer afternoon. How much longer does it get?

Solution: ΔL = αLΔT = 1.2 × 10⁻⁵ × 10 × 40 = 4.8 × 10⁻³ m = 4.8 mm. The gap between rails must be at least this.

Worked example 6.3: A metal plate of area 0.5 m² (α = 2 × 10⁻⁵ K⁻¹) is heated by 50 °C. Find the increase in area.

Solution: β = 2α = 4 × 10⁻⁵ K⁻¹. ΔA = 0.5 × 4 × 10⁻⁵ × 50 = 1 × 10⁻³ m² = 10 cm².

Worked example 6.4: A copper sphere of volume 100 cm³ (α = 1.7 × 10⁻⁵ K⁻¹) is heated by 100 °C. Find the increase in volume.

Solution: γ = 3α = 5.1 × 10⁻⁵ K⁻¹. ΔV = 100 × 5.1 × 10⁻⁵ × 100 = 0.51 cm³.

Worked example 6.5: A pendulum clock with a brass rod (α = 2 × 10⁻⁵ K⁻¹) keeps correct time at 20 °C. How much time does it lose per day at 30 °C?

Solution: Fractional change in period = ½ × 2 × 10⁻⁵ × 10 = 10⁻⁴. Time lost per day = 10⁻⁴ × 86 400 = 8.64 s.

Worked example 6.6: A steel rod (Y = 2 × 10¹¹ Pa, α = 1.2 × 10⁻⁵ K⁻¹) with cross-section 2 cm² is clamped between rigid walls and heated by 50 °C. Find the thermal stress and the force on the walls.

Solution: Stress = YαΔT = 2 × 10¹¹ × 1.2 × 10⁻⁵ × 50 = 1.2 × 10⁸ Pa. Force = 1.2 × 10⁸ × 2 × 10⁻⁴ = 2.4 × 10⁴ N, the weight of about 2.4 tonnes.

Worked example 6.7: A glass flask of 500 cm³ (γ_glass = 2.7 × 10⁻⁵ K⁻¹) is filled to the brim with mercury (γ = 1.8 × 10⁻⁴ K⁻¹). How much mercury spills when both are heated by 50 °C?

Solution: Overflow = V(γ_Hg − γ_glass)ΔT = 500 × (1.8 × 10⁻⁴ − 0.27 × 10⁻⁴) × 50 = 500 × 1.53 × 10⁻⁴ × 50 ≈ 3.8 cm³.

Worked example 6.8: A steel rod (α = 1.2 × 10⁻⁵ K⁻¹) and a brass rod (α = 1.8 × 10⁻⁵ K⁻¹) must differ in length by 10 cm at every temperature. Find their lengths.

Solution: Equal expansion: L_s × 1.2 = L_b × 1.8, so L_s = 1.5 L_b. Then L_s − L_b = 0.5 L_b = 10 cm. So L_b = 20 cm and L_s = 30 cm.

Quick revision

  • t_F = (9/5)t_C + 32; T = t_C + 273.15; 1 °C change = 1 K change; C and F agree at −40.

  • ΔL = αLΔT; ΔA = βAΔT; ΔV = γVΔT; α : β : γ = 1 : 2 : 3.

  • Holes expand like the material. ρ' ≈ ρ(1 − γΔT).

  • γ_real = γ_apparent + γ_vessel. Ideal gas at constant P: γ = 1/T.

  • Water is densest at 4 °C; lakes freeze from the top.

  • Pendulum: ΔT/T = ½αΔθ; loses time when hot.

  • Thermal stress = YαΔT, independent of length.

NEET traps

  • Thinking a hole in a heated plate shrinks. It grows.

  • Using γ = 2α or forgetting to multiply by 3 for volume.

  • Forgetting the vessel's expansion when a liquid overflows.

  • Converting a temperature change of 10 °C to 283 K. A change of 10 °C is a change of 10 K.

  • Saying a pendulum clock gains time in summer. It loses time.

  • Saying water is densest at 0 °C.

Practice MCQs: Chapter 6

Level 1: Concept check

1. Absolute zero on the Celsius scale is (a) 273.15 °C (b) −273.15 °C (c) 0 °C (d) −100 °C

2. For an isotropic solid, the coefficient of area expansion β and linear expansion α are related by (a) β = α (b) β = 3α (c) β = 2α (d) β = α/2

3. For an isotropic solid, γ equals (a) 3α (b) 2α (c) α (d) α/3

4. Water has its maximum density at (a) 0 °C (b) 100 °C (c) −4 °C (d) 4 °C

5. The SI unit of coefficient of linear expansion is (a) K⁻¹ (b) K (c) m/K (d) m K

6. The Celsius and Fahrenheit scales show the same reading at (a) 40 (b) −40 (c) 0 (d) 32

7. When a bimetallic strip is heated, it bends so that (a) the metal of higher α is on the concave side (b) the metal of lower α is on the convex side (c) the metal of higher α is on the convex side (d) it does not bend

8. Small gaps are left between railway rails to (a) drain rainwater (b) reduce noise (c) save steel (d) allow for thermal expansion

9. A circular hole in a metal plate, when the plate is heated, (a) shrinks (b) gets bigger (c) does not change (d) first shrinks, then grows

10. The coefficient of volume expansion of an ideal gas at constant pressure is (a) T (b) 1/T² (c) 1/T (d) 273 T

Level 2: NEET standard

11. A rod 2 m long (α = 1.5 × 10⁻⁵ K⁻¹) is heated by 100 °C. It lengthens by (a) 3 mm (b) 0.3 mm (c) 30 mm (d) 1.5 mm

12. 50 °C on the Fahrenheit scale is (a) 90 °F (b) 122 °F (c) 112 °F (d) 102 °F

13. A plate of area 1 m² (α = 2 × 10⁻⁵ K⁻¹) is heated by 100 °C. Its area increases by (a) 20 cm² (b) 60 cm² (c) 40 cm² (d) 4 cm²

14. A solid sphere of volume 1000 cm³ (α = 1 × 10⁻⁵ K⁻¹) is heated by 100 °C. Its volume increases by (a) 1 cm³ (b) 6 cm³ (c) 0.3 cm³ (d) 3 cm³

15. A pendulum clock with a steel rod (α = 1.2 × 10⁻⁵ K⁻¹) is correct at 15 °C. At 35 °C it loses per day about (a) 10.4 s (b) 20.7 s (c) 5.2 s (d) 1.04 s

16. A rod (Y = 1 × 10¹¹ Pa, α = 2 × 10⁻⁵ K⁻¹) is fixed between rigid walls and heated by 50 °C. The thermal stress is (a) 1 × 10⁷ Pa (b) 1 × 10⁸ Pa (c) 1 × 10⁹ Pa (d) 2 × 10⁸ Pa

17. In a deep lake whose surface has frozen in winter, the water at the bottom is at about (a) 0 °C (b) −4 °C (c) 4 °C (d) 10 °C

18. A liquid has γ = 5 × 10⁻⁴ K⁻¹. When heated by 20 °C, its density falls by about (a) 0.1% (b) 0.5% (c) 2% (d) 1%

19. A liquid shows an apparent expansion coefficient of 1.5 × 10⁻⁴ K⁻¹ in a vessel with γ = 3 × 10⁻⁵ K⁻¹. Its real expansion coefficient is (a) 1.8 × 10⁻⁴ K⁻¹ (b) 1.2 × 10⁻⁴ K⁻¹ (c) 1.5 × 10⁻⁴ K⁻¹ (d) 4.5 × 10⁻⁴ K⁻¹

20. A rod is 1 m long at 0 °C and 1.0012 m at 100 °C. Its α is (a) 1.2 × 10⁻⁴ K⁻¹ (b) 1.2 × 10⁻⁵ K⁻¹ (c) 1.2 × 10⁻⁶ K⁻¹ (d) 2.4 × 10⁻⁵ K⁻¹

21. For an ideal gas at constant pressure and 27 °C, the coefficient of volume expansion is (a) 1/27 K⁻¹ (b) 1/273 K⁻¹ (c) 1/300 K⁻¹ (d) 300 K⁻¹

22. A steel tape (α = 1.2 × 10⁻⁵ K⁻¹) is correct at 20 °C. At 40 °C it reads a length as 50.000 cm. The true length is (a) 49.988 cm (b) 50.000 cm (c) 50.024 cm (d) 50.012 cm

Level 3: Challenge

23. A steel rod (α = 1.2 × 10⁻⁵ K⁻¹) and a rod of metal B (α = 1.8 × 10⁻⁵ K⁻¹) differ in length by 15 cm at all temperatures. The length of the steel rod is (a) 30 cm (b) 45 cm (c) 60 cm (d) 15 cm

24. A glass flask of 1000 cm³ (γ = 3 × 10⁻⁵ K⁻¹) is filled to the brim with a liquid (γ = 6 × 10⁻⁴ K⁻¹). On heating both by 40 °C, the volume that overflows is (a) 24 cm³ (b) 2.28 cm³ (c) 22.8 cm³ (d) 1.2 cm³

25. A steel rod of cross-section 1 cm² (Y = 2 × 10¹¹ Pa, α = 1.2 × 10⁻⁵ K⁻¹) is clamped and heated by 100 °C. The force it exerts on the clamps is (a) 2.4 × 10⁴ N (b) 2.4 × 10³ N (c) 1.2 × 10⁴ N (d) 4.8 × 10⁴ N

26. An iron ring (α = 1.2 × 10⁻⁵ K⁻¹) has inner diameter 4.990 cm at 20 °C. It must slip over a shaft of diameter 5.000 cm. It must be heated to about (a) 167 °C (b) 207 °C (c) 147 °C (d) 187 °C

27. A brass pendulum clock (α = 2 × 10⁻⁵ K⁻¹) is correct at 25 °C. At 5 °C, in one day it (a) loses 17.3 s (b) gains 17.3 s (c) gains 8.6 s (d) loses 34.6 s

28. A metal (α = 1.8 × 10⁻⁵ K⁻¹) has density 9000 kg/m³ at 0 °C. Its density at 100 °C is about (a) 8995 kg/m³ (b) 9049 kg/m³ (c) 8952 kg/m³ (d) 8514 kg/m³

29. Assertion (A): Water at the bottom of a frozen lake stays liquid at about 4 °C. Reason (R): Water is densest at 4 °C, so colder water stays near the surface. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: A hole in a metal ring expands on heating as if it were filled with the same metal. Statement II: For an isotropic solid, the coefficient of volume expansion is twice the coefficient of linear expansion. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1b0 K = −273.15 °C
2c(1 + αΔT)² ≈ 1 + 2αΔT
3a(1 + αΔT)³ ≈ 1 + 3αΔT
4dAnomalous expansion below 4 °C
5aΔL/(LΔT) has unit K⁻¹
6bSet t = 9t/5 + 32, t = −40
7cThe longer strip goes on the outside of the curve
8dRoom for rails to lengthen in heat
9bA hole expands like the material
10cΔV/V = ΔT/T at constant P
11a1.5×10⁻⁵ × 2 × 100 = 3×10⁻³ m
12b9 × 50/5 + 32 = 122
13c2 × 2×10⁻⁵ × 100 = 4×10⁻³ m²
14d3 × 10⁻⁵ × 1000 × 100 = 3 cm³
15a½ × 1.2×10⁻⁵ × 20 × 86 400 ≈ 10.4 s
16bYαΔT = 10¹¹ × 2×10⁻⁵ × 50
17cDensest water sinks to the bottom
18dγΔT = 0.01
19aReal = apparent + vessel
20b0.0012/(1 × 100)
21cγ = 1/T = 1/300 K⁻¹
22d50 × (1 + 1.2×10⁻⁵ × 20) = 50.012 cm
23bL_s = 1.5L_B; 0.5L_B = 15, L_B = 30 cm
24c1000 × 5.7×10⁻⁴ × 40 = 22.8 cm³
25a2×10¹¹ × 10⁻⁴ × 1.2×10⁻⁵ × 100
26dΔT = 0.010/(4.990 × 1.2×10⁻⁵) ≈ 167 K; 20 + 167
27bShorter rod in cold; ½ × 2×10⁻⁵ × 20 × 86 400 = 17.3 s gained
28c9000/(1 + 5.4×10⁻³) ≈ 8952
29aR is the reason for A
30cI is true; γ = 3α, not 2α

Chapter 6 revision sheet

One-page summary

  • Temperature measures hotness; heat is energy in transit because of a temperature difference.

  • Bodies in thermal equilibrium have the same temperature.

  • Scale conversion: (t_C − 0)/100 = (t_F − 32)/180 = (T − 273.15)/100. So t_F = (9/5)t_C + 32 and T = t_C + 273.15.

  • −40 °C = −40 °F. A change of 1 °C = 1 K = 1.8 °F.

  • Linear expansion: ΔL = αLΔT. Area: ΔA = βAΔT. Volume: ΔV = γVΔT. Unit of each coefficient: K⁻¹.

  • For an isotropic solid: β = 2α and γ = 3α, so α : β : γ = 1 : 2 : 3.

  • A hole or cavity expands as if it were made of the surrounding material.

  • Density falls on heating: ρ' ≈ ρ(1 − γΔT).

  • Liquids: γ_real = γ_apparent + γ_vessel. Overflow from a full vessel = V(γ_liquid − γ_vessel)ΔT.

  • Ideal gas at constant pressure: γ = 1/T, so gases expand far more than solids.

  • Anomalous expansion: water contracts from 0 °C to 4 °C and is densest at 4 °C. Lakes freeze from the top; fish survive below.

  • Bimetallic strip: the metal with larger α ends up on the convex (outer) side when heated.

  • Pendulum clock: ΔT/T = ½αΔθ. It loses time when hot, gains when cold. Loss per day = ½αΔθ × 86400 s.

  • Thermal stress in a rod clamped at both ends: YαΔT. It does not depend on length or area.

  • Rods whose length difference stays fixed at all temperatures: L₁α₁ = L₂α₂.

Must-remember table

QuantityFormulaNote
Celsius to Fahrenheitt_F = 1.8 t_C + 32−40 is common to both
Celsius to kelvinT = t_C + 273.15ΔT same in °C and K
Linear expansionΔL = αLΔTα in K⁻¹
Area expansionβ = 2αholes grow too
Volume expansionγ = 3αisotropic solid
Real vs apparentγ_real = γ_app + γ_vesselliquids
Ideal gasγ = 1/Tconstant pressure
Pendulum clockΔT/T = ½αΔθloses time in summer
Thermal stressYαΔTindependent of L and A
Constant differenceL₁α₁ = L₂α₂rods of two metals

Memory aids

  • "One Two Three, Line Area Volume": α : β : γ = 1 : 2 : 3 for linear, area and volume expansion.

  • "Forty Freezes Both": −40 °C and −40 °F are the same temperature.

  • "Big Alpha Bulges Out": in a heated bimetallic strip, the metal with the bigger α is on the outer, bulging side.

  • "Four is the Floor": water at 4 °C is densest and sinks to the floor of a lake in winter.

  • "Summer clock, Slow clock": heat lengthens the pendulum, so the clock runs slow and loses time.

Concept connections

  • Physics Book 10: Oscillations and Waves: the pendulum period T = 2π√(L/g) is the base for clock-error problems.

  • Physics Book 9: Kinetic Theory of Gases: γ = 1/T for an ideal gas comes from PV = nRT at constant pressure.

  • Biology Book 10: Ecology and Environment: water's maximum density at 4 °C keeps deep lake water liquid, letting aquatic life survive winter.

Practice MCQs: Chapter 6, Level 4 (new NEET pattern)

31. Match each temperature in List I with its equal in List II.

List I:

  • A. 50 °C

  • B. 300 K

  • C. −40 °C

  • D. 212 °F

List II:

  • i. −40 °F

  • ii. 373 K

  • iii. 122 °F

  • iv. 27 °C

(a) A-iii, B-ii, C-i, D-iv (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-i, B-iv, C-iii, D-ii

32. Match each quantity with its value for an isotropic solid or an ideal gas.

List I:

  • A. Coefficient of area expansion β

  • B. Coefficient of volume expansion γ of a solid

  • C. γ for an ideal gas at constant pressure

  • D. α : β : γ

List II:

  • i. 1/T

  • ii. 2α

  • iii. 1 : 2 : 3

  • iv. 3α

(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-iv, C-iii, D-i (d) A-ii, B-i, C-iv, D-iii

33. Match each everyday fact with the idea behind it.

List I:

  • A. Gaps left between rail sections

  • B. Thermostat strip in an electric iron

  • C. Fish survive under a frozen lake

  • D. A pendulum clock loses time in summer

List II:

  • i. Longer pendulum, longer period

  • ii. Unequal expansion of two bonded metals

  • iii. Room for linear expansion

  • iv. Water is densest at 4 °C

(a) A-iii, B-iv, C-ii, D-i (b) A-ii, B-iii, C-iv, D-i (c) A-iii, B-ii, C-i, D-iv (d) A-iii, B-ii, C-iv, D-i

34. For steel take α = 1.2 × 10⁻⁵ K⁻¹ and Y = 2 × 10¹¹ Pa. Match List I with List II.

List I:

  • A. Increase in length of a 10 m rail heated by 50 K

  • B. Fractional increase in area of a plate heated by 100 K

  • C. Fractional increase in volume of a ball heated by 100 K

  • D. Thermal stress in a rod clamped at both ends and heated by 10 K

List II:

  • i. 2.4 × 10⁷ Pa

  • ii. 6 mm

  • iii. 3.6 × 10⁻³

  • iv. 2.4 × 10⁻³

(a) A-ii, B-iii, C-iv, D-i (b) A-ii, B-iv, C-iii, D-i (c) A-i, B-iv, C-iii, D-ii (d) A-ii, B-iv, C-i, D-iii

35. How many of the following statements are correct?

  • A. A hole in a metal plate becomes larger when the plate is heated.

  • B. Water contracts when heated from 0 °C to 4 °C.

  • C. The thermal stress in a clamped rod depends on its length.

  • D. The density of a solid falls when it is heated.

  • E. The coefficient of linear expansion has the unit K⁻¹.

(a) 4 (b) 3 (c) 5 (d) 2

36. A bimetallic strip is made of brass (larger α) and steel, straight at room temperature. Choose the correct set.

  • A. On heating, it bends with brass on the outer side.

  • B. On heating, it bends with steel on the outer side.

  • C. On cooling below room temperature, it bends with brass on the inner side.

  • D. It bends because the two metals have different coefficients of expansion.

(a) A and B only (b) B and D only (c) A, C and D only (d) A, B, C and D

37. How many statements about water are correct?

  • A. Water has its maximum density at 4 °C.

  • B. Ice at 0 °C is less dense than water at 0 °C.

  • C. In a deep frozen lake, the water at the bottom is near 4 °C.

  • D. Water expands uniformly from 0 °C to 100 °C.

(a) 2 (b) 3 (c) 4 (d) 1

38. A glass flask filled with a liquid is heated from below. Choose the correct set.

  • A. The liquid level may fall slightly at first because the glass warms first.

  • B. γ_real = γ_apparent + γ_vessel.

  • C. If the vessel and liquid have the same γ, the level stays at the same mark.

  • D. Apparent expansion is always greater than real expansion.

(a) A only (b) B and D only (c) A, B and D only (d) A, B and C only

39. A graph of the length of a metal rod (y-axis) against its temperature (x-axis) is a straight line. The length is 2.000 m at 20 °C and 2.0024 m at 120 °C. The coefficient of linear expansion is

(a) 2.4 × 10⁻⁵ K⁻¹ (b) 1.2 × 10⁻⁶ K⁻¹ (c) 1.2 × 10⁻⁵ K⁻¹ (d) 6 × 10⁻⁶ K⁻¹

40. A pendulum clock with a brass rod (α = 2 × 10⁻⁵ K⁻¹) keeps correct time at 20 °C.

Room temperatureError per day
20 °C0 s
30 °C?
10 °C?

The two missing entries are

(a) loses 8.64 s; gains 8.64 s (b) gains 8.64 s; loses 8.64 s (c) loses 17.28 s; gains 17.28 s (d) loses 4.32 s; gains 4.32 s

41. A graph of the density of water (y-axis) against temperature from 0 °C to 10 °C (x-axis) rises to a peak and then falls. The temperature of the peak, and what the volume of a fixed mass of water is at that temperature, are

(a) 0 °C; maximum (b) 4 °C; maximum (c) 0 °C; minimum (d) 4 °C; minimum

Passage for Q42–43: A blacksmith in a village fits a steel tyre on a cart wheel. At 20 °C the inner diameter of the tyre is 99.88 cm and the wheel's diameter is 100.00 cm. For steel, α = 1.2 × 10⁻⁵ K⁻¹ and Y = 2 × 10¹¹ Pa. Treat the wheel as rigid.

42. The tyre must be heated to about

(a) 100 °C (b) 120 °C (c) 220 °C (d) 80 °C

43. After fitting, the tyre cools back to 20 °C. The stress in it is about

(a) 2.4 × 10⁷ Pa (b) 1.2 × 10⁸ Pa (c) 2.4 × 10⁸ Pa (d) 4.8 × 10⁸ Pa

44. A steel rod (α = 1.2 × 10⁻⁵ K⁻¹) and a brass rod (α = 1.8 × 10⁻⁵ K⁻¹) differ in length by 10 cm at every temperature. Their lengths are

(a) steel 30 cm, brass 20 cm (b) steel 20 cm, brass 30 cm (c) steel 25 cm, brass 15 cm (d) steel 15 cm, brass 5 cm

45. A glass flask of volume 1000 cm³ is filled to the brim with mercury at 0 °C and heated to 100 °C. Take γ of mercury = 1.8 × 10⁻⁴ K⁻¹ and α of glass = 9 × 10⁻⁶ K⁻¹. The volume of mercury that overflows is

(a) 18 cm³ (b) 2.7 cm³ (c) 20.7 cm³ (d) 15.3 cm³

Level 4 answer key

QAnsReason
31c1.8 × 50 + 32 = 122 °F; 300 − 273 = 27 °C; −40 is common; 212 °F = 100 °C ≈ 373 K
32aβ = 2α, γ = 3α, ideal gas γ = 1/T, ratio 1 : 2 : 3
33dRails: room to expand; iron: bimetal; lake: 4 °C water; clock: longer pendulum
34b10 × 1.2 × 10⁻⁵ × 50 = 6 mm; 2αΔT = 2.4 × 10⁻³; 3αΔT = 3.6 × 10⁻³; YαΔT = 2.4 × 10⁷ Pa
35aOnly C is false: thermal stress YαΔT does not depend on length
36cLarger α goes on the outside when hot and on the inside when cold
37bA, B, C true; water's expansion is not uniform (anomalous below 4 °C)
38dApparent expansion is less than real expansion because the vessel expands too
39cα = 0.0024/(2 × 100) = 1.2 × 10⁻⁵ K⁻¹
40a½ × 2 × 10⁻⁵ × 10 × 86400 = 8.64 s; hot clock loses, cold clock gains
41dWater is densest at 4 °C, so a fixed mass has its least volume there
42bΔT = (0.12/99.88)/(1.2 × 10⁻⁵) ≈ 100 K, so about 120 °C
43cStrain ≈ 1.2 × 10⁻³; stress = 2 × 10¹¹ × 1.2 × 10⁻³ ≈ 2.4 × 10⁸ Pa
44a1.2 L_s = 1.8 L_b and L_s − L_b = 10 give L_b = 20 cm, L_s = 30 cm
45dγ_glass = 2.7 × 10⁻⁵; overflow = 1000 × 100 × (18 − 2.7) × 10⁻⁵ = 15.3 cm³
25 min left
‹
›