Chapter 10 of 13 · 23 min read

Chapter 8: Interference and Young's Double-Slit Experiment

What you will learn

  • The superposition of two light waves and the resultant intensity formula.

  • Conditions for constructive and destructive interference in terms of phase and path difference.

  • Coherent sources and the conditions for sustained interference.

  • Young's double-slit experiment: path difference, fringe positions and fringe width, with derivation.

  • How the pattern changes with a medium, white light, a thin sheet over one slit, or a change in d, D or λ.

8.1 Superposition of two waves

When two waves overlap, the displacement at any point is the sum of the separate displacements. This is the principle of superposition. Two wakes from boats on a lake show it: where crest meets crest the water rises high, where crest meets trough it stays flat.

Let two waves of the same frequency reach a point with amplitudes a1, a2 and phase difference φ:

y1=a1cos⁡ωt,y2=a2cos⁡(ωt+ϕ)y_1 = a_1 \cos\omega t, \qquad y_2 = a_2\cos(\omega t + \phi)

Adding them as phasors, the resultant amplitude A satisfies

A2=a12+a22+2a1a2cos⁡ϕA^2 = a_1^2 + a_2^2 + 2a_1 a_2 \cos\phi

Intensity is proportional to amplitude squared, so

I=I1+I2+2I1I2cos⁡ϕI = I_1 + I_2 + 2\sqrt{I_1 I_2}\cos\phi

The last term is the interference term. Phase difference and path difference Δx are linked by

ϕ=2πλ Δx\phi = \frac{2\pi}{\lambda}\,\Delta x
TypePhase differencePath differenceIntensity
Constructive (bright)0, 2π, 4π, …0, λ, 2λ, …Imax = (√I1 + √I2)²
Destructive (dark)π, 3π, 5π, …λ/2, 3λ/2, …Imin = (√I1 − √I2)²

For two equal sources (I1 = I2 = I0):

I=2I0(1+cos⁡ϕ)=4I0cos⁡2ϕ2I = 2I_0(1 + \cos\phi) = 4I_0\cos^2\frac{\phi}{2}

The maximum is 4I0 and the minimum is zero. Energy is not created or destroyed. It is only moved from dark regions to bright ones. The average over the screen is 2I0, the same as with no interference.

The ratio of maximum to minimum intensity is often asked:

Imax⁡Imin⁡=(a1+a2a1−a2)2\frac{I_{\max}}{I_{\min}} = \left(\frac{a_1 + a_2}{a_1 - a_2}\right)^2

8.2 Coherent sources and sustained interference

Switch on two identical tube lights in a room. You never see bright and dark bands on the wall. Why?

An ordinary source emits light in short bursts from many atoms. Each burst lasts about 10⁻⁸ s, and its phase is random. So the phase difference between two independent sources changes millions of times a second. The cos φ term averages to zero, and the eye sees just I1 + I2 everywhere.

Two sources are coherent if the phase difference between them stays constant in time. Only coherent sources give a steady (sustained) interference pattern. In practice, coherent sources are made from one source:

  • Division of wavefront: two slits take light from the same wavefront, as in Young's experiment.

  • Division of amplitude: one beam is split by partial reflection, as in thin films like soap bubbles and oil on a wet road.

Conditions for sustained and clear interference:

  1. The two sources must be coherent.

  2. They must give light of the same frequency (monochromatic light gives the clearest pattern).

  3. Their amplitudes should be equal or nearly equal, so the dark fringes are truly dark.

  4. The slits should be narrow, close together (small d), and the screen far away (large D), so fringes are wide enough to see.

  5. If the light is polarised, the two waves should have the same polarisation.

8.3 Young's double-slit experiment

In 1801 Thomas Young passed sunlight through a pinhole S and then through two close pinholes S1 and S2. The two holes act as coherent sources. On a far screen he saw alternate bright and dark bands. Modern versions use slits and a laser or a sodium lamp.

Figure 8.1 · Young's double-slit set-up and the fringe pattern on the screen
Figure 8.1 · Young's double-slit set-up and the fringe pattern on the screen

Light from S1 and S2 reaches P by paths that differ by yd/D; bright bands appear wherever that difference is a whole number of wavelengths, one fringe width β apart, with the cos² intensity profile shown at the right.

Path difference. Let the slits be a distance d apart and the screen a distance D away (D much larger than d). Take a point P on the screen at height y above the centre O.

(S2P)2−(S1P)2=[D2+(y+d2)2]−[D2+(y−d2)2]=2yd(S_2P)^2 - (S_1P)^2 = \left[D^2 + \left(y + \tfrac{d}{2}\right)^2\right] - \left[D^2 + \left(y - \tfrac{d}{2}\right)^2\right] = 2yd

So (S2P − S1P)(S2P + S1P) = 2yd. Since D is large, S2P + S1P ≈ 2D:

Δx=S2P−S1P≈ydD=dsin⁡θ\Delta x = S_2P - S_1P \approx \frac{yd}{D} = d\sin\theta

Bright fringes need Δx = nλ:

yn=nλDd,n=0,±1,±2,…y_n = \frac{n\lambda D}{d}, \qquad n = 0, \pm1, \pm2, \ldots

Dark fringes need Δx = (n + ½)λ:

yn′=(n+12)λDdy_n' = \left(n + \frac{1}{2}\right)\frac{\lambda D}{d}

Fringe width is the distance between two consecutive bright (or dark) fringes:

β=λDd,angular fringe width θ=βD=λd\beta = \frac{\lambda D}{d}, \qquad \text{angular fringe width } \theta = \frac{\beta}{D} = \frac{\lambda}{d}

Bright and dark fringes are equally spaced and of equal width (for small angles). The centre O is always bright (zero path difference). The nth dark fringe lies at (n − ½)β from the centre.

8.4 What changes the pattern

ChangeEffect on fringe width
Slit separation d doubledβ halves
Screen distance D doubledβ doubles
Red light replaced by blueβ decreases (shorter λ)
Whole set-up immersed in a liquid of index nβ becomes β/n
Slit widths changed (equal)β unchanged; brightness changes
One slit coveredNo interference; only a single-slit diffraction pattern

White light. Each colour makes its own fringes with its own β. At the centre all colours have zero path difference, so the central fringe is white. On either side, coloured fringes appear. After a few fringes the colours overlap so much that the screen looks uniformly white again.

A thin sheet over one slit. A transparent sheet of thickness t and index μ placed over S1 adds an extra optical path (μ − 1)t to rays from S1. The zero-path-difference point moves towards S1. The whole pattern shifts, without changing β, by

Δy=(μ−1)tDd=(μ−1)tλ β\Delta y = \frac{(\mu - 1)tD}{d} = \frac{(\mu - 1)t}{\lambda}\,\beta

The number of fringes that cross the centre is (μ − 1)t/λ.

Intensity at a general point. With equal slits and central intensity I(max) = 4I0, a point with path difference Δx has I = I(max) cos²(πΔx/λ).

Worked example 8.1: In a double-slit set-up, d = 0.5 mm, D = 1 m and λ = 600 nm. Find the fringe width.

Solution: β = λD/d = (6 × 10^−7 × 1)/(5 × 10^−4) = 1.2 × 10^−3 m = 1.2 mm.

Worked example 8.2: For the set-up of example 8.1, find the distances of the third bright fringe and the third dark fringe from the centre.

Solution: Third bright: 3β = 3.6 mm. Third dark: (3 − ½)β = 2.5 × 1.2 = 3.0 mm.

Worked example 8.3: Two coherent waves have intensities in the ratio 9 : 1. Find Imax/Imin.

Solution: Amplitude ratio = 3 : 1. Imax/Imin = (3 + 1)²/(3 − 1)² = 16/4 = 4.

Worked example 8.4: The apparatus of example 8.1 is put under water (n = 4/3). Find the new fringe width.

Solution: λ in water = λ/n, so β = 1.2/(4/3) = 0.9 mm.

Worked example 8.5: A mica sheet 6 μm thick (μ = 1.5) covers one slit of the set-up in example 8.1. How many fringes shift, and by what distance?

Solution: Number of fringes = (μ − 1)t/λ = (0.5 × 6 × 10^−6)/(6 × 10^−7) = 5. Shift = 5β = 6 mm, towards the covered slit.

Worked example 8.6: With two equal slits, the central intensity is I(max). Find the intensity where the path difference is λ/4.

Solution: φ = (2π/λ)(λ/4) = π/2. I = I(max) cos²(π/4) = I(max)/2.

Worked example 8.7: Light of wavelengths 650 nm and 520 nm is used together with d = 2 mm and D = 1.2 m. Find the least distance from the centre where bright fringes of both coincide.

Solution: We need n1 × 650 = n2 × 520. The ratio 650/520 = 5/4, so the smallest choice is n1 = 4, n2 = 5, giving a path difference of 2600 nm.

y=2600×10−9×1.22×10−3=1.56×10−3 my = \frac{2600 \times 10^{-9} \times 1.2}{2 \times 10^{-3}} = 1.56 \times 10^{-3}\ \text{m}

The bright fringes first coincide 1.56 mm from the centre.

Worked example 8.8 (NEET-hard): In a double-slit experiment with equal slits, the intensity at the central maximum is I(max). Find the intensity at a point where the path difference is λ/6, and say how far this point is from the centre in terms of β.

Solution: φ = (2π/λ)(λ/6) = π/3. I = I(max) cos²(π/6) = 3I(max)/4.

Path difference yd/D = λ/6 gives y = λD/(6d) = β/6.

Quick revision

  • I = I1 + I2 + 2√(I1I2) cos φ; equal sources: I = 4I0 cos²(φ/2).

  • φ = (2π/λ)Δx. Bright: Δx = nλ. Dark: Δx = (n + ½)λ.

  • Imax/Imin = [(a1 + a2)/(a1 − a2)]².

  • Coherent sources keep a constant phase difference; independent lamps are never coherent.

  • YDSE: Δx = yd/D; β = λD/d; angular width λ/d.

  • In a medium, β becomes β/n. White light gives a white central fringe.

  • Sheet over one slit: shift = (μ − 1)tD/d towards that slit; β unchanged.

  • Interference only redistributes energy.

NEET traps

  • Adding intensities as (I1 + I2) at a bright fringe. Add amplitudes first, then square.

  • Placing the nth dark fringe at nβ. It is at (n − ½)β.

  • Thinking the sheet over a slit changes β. It only shifts the pattern.

  • Shifting the pattern away from the covered slit. It shifts towards it.

  • Believing interference destroys energy at dark fringes. It is redistributed.

  • Saying two identical bulbs are coherent because they have the same frequency. Coherence needs a constant phase difference.

Practice MCQs: Chapter 8

Level 1: Concept check

1. The fringe width in Young's double-slit experiment is (a) λd/D (b) Dd/λ (c) d/(λD) (d) λD/d

2. Two sources are coherent if they have (a) a constant phase difference (b) the same amplitude only (c) the same intensity only (d) a randomly changing phase difference

3. Two independent sodium lamps do not give an interference pattern because they (a) have different wavelengths (b) are too bright (c) are not coherent (d) give unpolarised light

4. Constructive interference occurs when the path difference is (a) an odd multiple of λ/2 (b) a whole number of wavelengths (c) λ/4 (d) an odd multiple of λ/4

5. Destructive interference occurs when the path difference is (a) an odd multiple of λ/2 (b) zero (c) 2λ (d) λ

6. If the slit separation in Young's experiment is doubled, the fringe width (a) doubles (b) stays the same (c) becomes four times (d) halves

7. With white light in Young's experiment, the central fringe is (a) red (b) violet (c) white (d) dark

8. In interference, energy is (a) destroyed at dark fringes (b) redistributed from dark to bright regions (c) created at bright fringes (d) lost as heat

9. A path difference of λ/2 corresponds to a phase difference of (a) π (b) π/2 (c) 2π (d) π/4

10. If the whole Young's apparatus is immersed in water, the fringe width (a) increases (b) stays the same (c) decreases (d) becomes zero

Level 2: NEET standard

11. In Young's experiment, d = 0.4 mm, D = 1.2 m and λ = 500 nm. The fringe width is (a) 1.2 mm (b) 1.5 mm (c) 0.15 mm (d) 3 mm

12. Two coherent waves of intensities I and 4I interfere. The ratio Imax/Imin is (a) 4 (b) 5 (c) 3 (d) 9

13. In an interference pattern, Imax/Imin = 25. The ratio of the intensities of the two sources is (a) 9 : 4 (b) 5 : 1 (c) 25 : 1 (d) 3 : 2

14. The fringe width is 0.8 mm. The distance between the 2nd and 5th bright fringes on the same side of the centre is (a) 4 mm (b) 1.6 mm (c) 2.4 mm (d) 5.6 mm

15. The fringe width is 2 mm. The 4th dark fringe lies at a distance from the centre of (a) 8 mm (b) 7 mm (c) 9 mm (d) 6 mm

16. The fringe width is 2.0 mm in air. In a liquid of refractive index 1.25 it becomes (a) 2.5 mm (b) 2.0 mm (c) 1.25 mm (d) 1.6 mm

17. Light of wavelength 600 nm falls on two slits 0.3 mm apart. The angular fringe width is (a) 2 × 10^−3 rad (b) 2 × 10^−4 rad (c) 5 × 10^−4 rad (d) 1.8 × 10^−2 rad

18. A sheet of thickness 4 μm and index 1.6 covers one slit (λ = 600 nm). The number of fringes that shift is (a) 2 (b) 6 (c) 4 (d) 10

19. With equal slits, the central intensity is I(max). At a point where the path difference is λ/3, the intensity is (a) I(max)/2 (b) I(max)/4 (c) 3I(max)/4 (d) zero

20. The fringe width is 2.4 mm for λ = 600 nm. For λ = 450 nm with the same set-up it is (a) 1.8 mm (b) 3.2 mm (c) 2.4 mm (d) 1.2 mm

21. Light of wavelengths 480 nm and 600 nm is used together, with d = 1 mm and D = 1 m. Bright fringes of both first coincide at a distance from the centre of (a) 0.48 mm (b) 0.6 mm (c) 1.2 mm (d) 2.4 mm

22. Two coherent sources of equal intensity I meet at a point with phase difference π/2. The resultant intensity is (a) 4I (b) I (c) 2I (d) zero

Level 3: Challenge

23. Two coherent sources each of intensity I0 meet at a point with path difference λ/6. The intensity there is (a) 2I0 (b) 3I0 (c) 4I0 (d) I0

24. The angular fringe width is 0.20° for light of 600 nm. If the wavelength increases by 10%, the angular fringe width becomes (a) 0.18° (b) 0.20° (c) 0.24° (d) 0.22°

25. A glass sheet (μ = 1.5) over one slit moves the central maximum to where the 5th bright fringe was. For λ = 600 nm, the thickness of the sheet is (a) 6 μm (b) 3 μm (c) 2 μm (d) 12 μm

26. In Young's experiment, d = 1 mm and λ = 600 nm. The screen is moved 50 cm closer to the slits. The fringe width changes by (a) 0.6 mm (b) 0.03 mm (c) 0.3 mm (d) 3 mm

27. The 10th bright fringe for wavelength λ1 coincides with the 12th bright fringe for 500 nm. Then λ1 is (a) 417 nm (b) 600 nm (c) 550 nm (d) 650 nm

28. Two slits are lit by light of wavelength 600 nm. At a point on the screen the path difference is 2100 nm. The point lies on (a) the 3rd bright fringe (b) the 4th bright fringe (c) the 3rd dark fringe (d) the 4th dark fringe

29. Assertion (A): Two independent bulbs of the same power do not give a sustained interference pattern. Reason (R): The phase difference between the light from them changes randomly and rapidly. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: In Young's experiment, the fringe width does not depend on the distance between the slits and the screen. Statement II: For small angles, the bright and dark fringes in Young's experiment are of equal width. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1dβ = λD/d
2aDefinition of coherence
3cTheir phase difference changes randomly
4bΔx = nλ
5aΔx = (2n + 1)λ/2
6dβ is inversely proportional to d
7cZero path difference for every colour
8bTotal energy is conserved
9aφ = (2π/λ)(λ/2)
10cλ drops to λ/n
11b5 × 10^−7 × 1.2/4 × 10^−4 = 1.5 mm
12d(1 + 2)²/(2 − 1)² = 9
13a(a1 + a2)/(a1 − a2) = 5 gives a1/a2 = 3/2
14c3β = 2.4 mm
15b3.5β = 7 mm
16d2.0/1.25 = 1.6 mm
17aλ/d = 6 × 10^−7/3 × 10^−4
18c0.6 × 4 × 10^−6/6 × 10^−7 = 4
19bφ = 2π/3; cos²(π/3) = 1/4
20aβ is proportional to λ: 2.4 × 0.75
21d5 × 480 = 4 × 600 = 2400 nm; y = 2.4 mm
22cI + I + 2I cos 90° = 2I
23b4I0 cos²(π/6) = 3I0
24dAngular width is proportional to λ
25at = 5λ/(μ − 1) = 6 μm
26cΔβ = λΔD/d = 6 × 10^−7 × 0.5/10^−3
27b10λ1 = 12 × 500 nm
28d2100/600 = 3.5, which is (4 − ½): 4th dark fringe
29aR is the reason they are not coherent
30dI false (β = λD/d); II true

Chapter 8 revision sheet

One-page summary

  • Superposition: resultant amplitude A² = a1² + a2² + 2a1a2 cos φ.

  • Intensity: I = I1 + I2 + 2√(I1I2) cos φ; for equal sources I = 4I0 cos²(φ/2).

  • Phase and path: φ = (2π/λ)Δx.

  • Constructive: Δx = nλ (φ = 2nπ); destructive: Δx = (2n − 1)λ/2.

  • Imax = (√I1 + √I2)², Imin = (√I1 − √I2)²; Imax/Imin = [(r + 1)/(r − 1)]² with r = a1/a2.

  • Sustained interference needs coherent sources (constant phase difference), same frequency, nearly equal amplitudes, narrow slits close together.

  • Two independent bulbs are not coherent; YDSE gets coherence by splitting one wavefront.

  • YDSE path difference: Δx = yd/D. Bright fringe yn = nλD/d; dark fringe yn = (2n − 1)λD/(2d).

  • Fringe width β = λD/d; angular fringe width λ/d (independent of D).

  • In a medium of index n: β becomes β/n.

  • Thin sheet (n, t) on one slit: pattern shifts by (n − 1)tD/d towards that slit; number of fringes shifted = (n − 1)t/λ; β unchanged.

  • White light: central fringe white, then a few coloured fringes (violet inner edge, red outer), then uniform illumination.

  • Energy is only redistributed; the average intensity stays I1 + I2.

Must-remember table

ItemFormulaNote
Fringe widthβ = λD/dBright and dark both
nth brightnλD/dn = 0 is central
nth dark(2n − 1)λD/(2d)First dark at β/2
Equal-source intensity4I0 cos²(φ/2)Max 4I0
Intensity ratio[(r + 1)/(r − 1)]²r = amplitude ratio
Fringe width in mediumβ/nn of medium
Sheet shift(n − 1)tD/dTowards covered slit
Fringes shifted(n − 1)t/λβ unchanged

Memory aids

  • "Lambda D over d, Lady Dances over dad": β = λD/d, capital D (screen) on top, small d (slits) below.

  • "Sheet Shifts, never Shrinks": a thin sheet moves the pattern but does not change β.

  • "Four I-nought at the top": two equal coherent sources give a peak of 4I0.

  • "Root, add, square": for Imax, take roots of I1 and I2, add, then square.

  • "Water Widths Weaken": in water, fringe width shrinks by n.

Concept connections

  • Superposition and phase difference come from Physics Book 10: Oscillations and Waves.

  • Interference of electron waves links to de Broglie waves in Physics Book 17: Dual Nature of Matter and Radiation.

  • Huygens' wavefronts from Chapter 7 of this book explain why two slits act as coherent sources.

Practice MCQs: Chapter 8, Level 4 (new NEET pattern)

31. In a YDSE, λ = 600 nm, d = 0.5 mm and D = 1 m. Match List I with List II.

  • List I: (A) Fringe width (B) Distance of the 3rd bright fringe from the centre (C) Distance of the 2nd dark fringe from the centre (D) Distance between the 2nd bright and the 5th dark fringe on the same side

  • List II: (i) 3.6 mm (ii) 1.8 mm (iii) 3.0 mm (iv) 1.2 mm

(a) A-iv, B-ii, C-i, D-iii (b) A-i, B-iv, C-ii, D-iii (c) A-iv, B-i, C-iii, D-ii (d) A-iv, B-i, C-ii, D-iii

32. A YDSE has fringe width β with light of 600 nm in air. Match the single change in List I with the new fringe width in List II.

  • List I: (A) Screen distance doubled (B) Slit separation doubled (C) Whole set-up put in water (n = 4/3) (D) Light changed to 400 nm

  • List II: (i) 3β/4 (ii) 2β/3 (iii) β/2 (iv) 2β

(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-iv, B-iii, C-ii, D-i (d) A-iv, B-i, C-iii, D-ii

33. Two coherent sources have the intensity ratio given in List I. Match with Imax/Imin in List II.

  • List I: (A) 1 : 1 (B) 4 : 1 (C) 9 : 1 (D) 16 : 9

  • List II: (i) 9 (ii) Infinite (Imin = 0) (iii) 49 (iv) 4

(a) A-ii, B-iv, C-i, D-iii (b) A-ii, B-i, C-iv, D-iii (c) A-i, B-ii, C-iv, D-iii (d) A-ii, B-i, C-iii, D-iv

34. Two coherent waves, each of intensity I0, meet with the phase difference in List I. Match with the resultant intensity in List II.

  • List I: (A) 0 (B) π/2 (C) 2π/3 (D) π

  • List II: (i) I0 (ii) Zero (iii) 4I0 (iv) 2I0

(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-iii, B-iv, C-ii, D-i

35. Choose the correct set of statements about coherent sources.

  • A. Two independent sodium lamps are not coherent.

  • B. The two slits in a YDSE, lit by one source, behave as coherent sources.

  • C. Laser light is highly coherent.

  • D. Coherent sources must have exactly equal amplitudes.

(a) A and D only (b) B, C and D only (c) A, B, C and D (d) A, B and C only

36. A YDSE is done with white light. How many of these statements are correct?

  • A. The central fringe is white.

  • B. In the first coloured fringe on each side, violet lies nearer the centre than red.

  • C. All the fringes are white.

  • D. After a few coloured fringes, the screen looks uniformly lit.

(a) 2 (b) 3 (c) 4 (d) 1

37. A thin transparent sheet is placed in front of one slit of a YDSE. Choose the correct set of statements.

  • A. The pattern shifts towards the covered slit.

  • B. The fringe width does not change.

  • C. The shift is (n − 1)tD/d.

  • D. The number of fringes that cross a point is (n − 1)t/λ.

(a) A and B only (b) A, B and C only (c) A, B, C and D (d) B and D only

38. How many of these statements about energy in interference are correct?

  • A. Energy is conserved; it is only redistributed between bright and dark fringes.

  • B. The average intensity over many fringes equals I1 + I2.

  • C. With two equal sources of intensity I0, a bright fringe has intensity 2I0.

  • D. Sustained interference needs a constant phase difference.

(a) 1 (b) 2 (c) 4 (d) 3

39. A YDSE intensity graph on the screen shows equally spaced peaks 0.8 mm apart. The slits are 0.75 mm apart and the screen is 1 m away. The wavelength is (a) 600 nm (b) 500 nm (c) 450 nm (d) 750 nm

40. For a YDSE with d = 0.5 mm, a graph of fringe width β (y-axis) against screen distance D (x-axis) is a straight line through the origin with slope 1.0 × 10⁻³. The wavelength is (a) 400 nm (b) 600 nm (c) 500 nm (d) 250 nm

41. A YDSE with the screen 1.5 m away gives these readings.

λ (nm)400500600
β (mm)0.81.0?

The slit separation and the missing fringe width are (a) 0.5 mm, 1.2 mm (b) 0.75 mm, 1.2 mm (c) 0.75 mm, 1.0 mm (d) 1.5 mm, 1.2 mm

Case for Q42–Q43: A YDSE with d = 1 mm and D = 1.2 m is lit by a lamp giving two wavelengths together, 500 nm and 600 nm. A student looks for the first place beyond the centre where bright fringes of both colours fall together.

42. That point is at a distance from the central fringe of (a) 3.0 mm (b) 0.6 mm (c) 7.2 mm (d) 3.6 mm

43. At that point, the order of the 500 nm bright fringe is (a) 6 (b) 5 (c) 4 (d) 3

44. A mica sheet (n = 1.6) placed over one slit moves the central bright fringe to where the 5th bright fringe was. With λ = 600 nm, the thickness of the sheet is (a) 3 µm (b) 5 µm (c) 7.5 µm (d) 2.5 µm

45. In a YDSE one slit gives four times the intensity of the other. At a point where the path difference is λ/4, the intensity as a fraction of the maximum intensity is (a) 1/2 (b) 4/9 (c) 5/9 (d) 1/3

Level 4 answer key

QAnsReason
31dβ = 1.2 mm; 3β = 3.6; 1.5β = 1.8; 4.5β − 2β = 2.5β = 3.0 mm
32aβ ∝ λD/d, and β/n in a medium
33br = 1, 2, 3, 4/3 give [(r + 1)/(r − 1)]² = infinite, 9, 4, 49
34c4I0 cos²(φ/2) = 4I0, 2I0, I0, 0
35dEqual amplitudes help contrast but are not needed for coherence
36bOnly C is false
37cAll four are standard results of a sheet in one path
38dPeak is 4I0, not 2I0
39aλ = βd/D = 0.8 × 10⁻³ × 0.75 × 10⁻³/1 = 6 × 10⁻⁷ m
40cSlope = λ/d, λ = 10⁻³ × 0.5 × 10⁻³ = 5 × 10⁻⁷ m
41bd = λD/β = 400 × 10⁻⁹ × 1.5/0.8 × 10⁻³ = 0.75 mm; β ∝ λ gives 1.2 mm
42d6 × 500 = 5 × 600 = 3000 nm; y = 3000 × 10⁻⁹ × 1.2/10⁻³ = 3.6 mm
43an1 × 500 = 3000 gives n1 = 6
44b(n − 1)t = 5λ, t = 3000 nm/0.6 = 5 µm
45cφ = π/2: I = 4I + I = 5I; Imax = (2 + 1)²I = 9I
23 min left
‹
›