Chapter 3: Refraction at Spherical Surfaces and Lenses
What you will learn
The formula for refraction at a single spherical surface, with its derivation.
The lens maker formula and how the surrounding medium changes a lens.
The thin lens formula, magnification and image formation by convex and concave lenses.
Power of a lens in dioptres.
Useful results: the 4f rule, the displacement method and what happens when a lens is cut or covered.
3.1 Refraction at a single spherical surface
A glass marble, the curved front of a fish bowl, the cornea of your eye: each is a single curved surface separating two media. We want a formula linking object and image distances for such a surface.
Set-up. A convex spherical surface of radius R separates medium 1 (index n1, on the left) from medium 2 (index n2, on the right). Its pole is P and its centre of curvature C lies in medium 2. A point object O on the axis sends a ray to a point N on the surface, at small height h above the axis. The ray refracts and meets the axis at I.
Let the ray ON make angle α with the axis, NC make angle β and NI make angle γ. For paraxial rays, each angle equals its tangent:
NC is the normal at N. From the triangles, the angle of incidence i = α + β and the angle of refraction r = β − γ. Snell's law for small angles gives n1 i = n2 r:
Now apply signs: OP = −u, PI = +v, PC = +R.
This single formula covers convex and concave surfaces and either direction of light, if signs are used honestly. Here n1 is always the medium the light comes from.
The magnification produced by a single surface is
One neat result: an object at the centre of curvature of a surface is seen exactly where it is. Rays from C hit the surface along the normal and do not bend. So a bubble at the centre of a glass ball appears at the centre.
3.2 Lens maker formula
A thin lens is two refracting surfaces very close together. Let the lens have index n2, the surrounding medium index n1, and surface radii R1 (first surface met by the light) and R2 (second).
First surface. It forms an image I1 at distance v1 from the lens:
Second surface. I1 acts as the object, with light now going from n2 into n1. The lens is thin, so distances from both surfaces are the same:
Add the two. The n2/v1 terms cancel:
For an object at infinity the image forms at the focus, v = f. Dividing by n1:
This is the lens maker formula. In air, n1 = 1 and n2 = n.
| Lens shape | R1 | R2 | Sign of f (n greater than surroundings) |
|---|---|---|---|
| Equiconvex | +R | −R | Positive, f = R/[2(n − 1)] |
| Plano-convex (curved side first) | +R | Infinite | Positive, f = R/(n − 1) |
| Equiconcave | −R | +R | Negative |
| Convexo-concave meniscus | +R1 | +R2 (larger) | Positive |
Lens in a liquid. The factor (n2/n1 − 1) changes with the surroundings, but the radii do not. So for the same lens, f in a liquid and f in air are related by
If the liquid is less dense optically than the glass, f becomes longer.
If the liquid has the same index as the glass, f is infinite: the lens vanishes optically.
If the liquid is denser, f changes sign: a convex glass lens becomes diverging.
3.3 Thin lens formula and magnification
Compare the sum of the two surface equations with the lens maker formula. The right sides are equal, so
This is the thin lens formula. Note the minus sign, unlike the mirror formula.
The magnification of a thin lens comes from the ray through the optical centre, which passes undeviated. Similar triangles give
For a real object, a real image has m negative (inverted) and a virtual image has m positive (erect).
Differentiating the lens formula gives dv/du = v²/u² = m². So along the axis a lens image moves in the same direction as the object, at m² times its speed.
3.4 Image formation by lenses
Rules for ray diagrams:
A ray parallel to the axis passes through F2 (convex) or appears to come from F1 (concave).
A ray through the optical centre goes straight on.
A ray towards F1 (or through F1 for convex) emerges parallel to the axis.

In (a) the parallel ray bends through F2 and meets the central ray between F2 and 2F2, giving a smaller real inverted image; in (b) the rays diverge and the image is virtual, erect and smaller, on the object's side.
| Object position (convex lens) | Image position | Nature and size |
|---|---|---|
| At infinity | At F2 | Real, inverted, point-sized |
| Beyond 2F1 | Between F2 and 2F2 | Real, inverted, diminished |
| At 2F1 | At 2F2 | Real, inverted, same size |
| Between F1 and 2F1 | Beyond 2F2 | Real, inverted, enlarged |
| At F1 | At infinity | Real, inverted, highly enlarged |
| Between F1 and O | Same side as object | Virtual, erect, enlarged |
A concave lens always gives a virtual, erect, diminished image of a real object, lying between O and F1.
The 4f rule. For a convex lens, the distance D between a real object and its real image is smallest when both are at 2f. Then D = 4f. If D is less than 4f, no real image forms on a screen.
Displacement method. Keep object and screen a distance D apart (D greater than 4f). Two lens positions, a distance d apart, give sharp images. The positions are swapped versions of each other (u and v exchange). Then
Covering and cutting.
Cover half a lens with black paper: the full image still forms, only dimmer. Every part of the lens forms the whole image.
Cut an equiconvex lens along its axis (into left and right halves): each half has the same f.
Cut it by a plane perpendicular to the axis (into two plano-convex lenses): each has 2f, so power halves.
3.5 Power of a lens
A lens with a short focal length bends light more strongly. Its power is
The SI unit is the dioptre (D), equal to m⁻¹. A convex lens has positive power, a concave lens negative power. An optometrist's prescription of −2.5 D means a concave lens of focal length 40 cm.
For a lens in a medium of index n1, the general definition is P = n1/f. In NEET problems, power is almost always quoted in air.
Worked example 3.1: A glass rod (n = 1.5) has a convex end of radius 10 cm. An object in air is 30 cm from the end on its axis. Where does the image form?
Solution: n1 = 1, n2 = 1.5, u = −30 cm, R = +10 cm.
v = +90 cm. The image is real, 90 cm inside the rod.
Worked example 3.2: An equiconvex lens (n = 1.5) has both radii 20 cm. Find its focal length and power.
Solution: R1 = +20, R2 = −20.
f = 20 cm = 0.2 m, so P = +5 D.
Worked example 3.3: The lens of example 3.2 is put in water (n = 4/3). Find its new focal length.
Solution: Relative index = 1.5/(4/3) = 1.125. So 1/f = 0.125 × (1/10) = 1/80, giving f = 80 cm. The lens is four times weaker in water.
Worked example 3.4: An object is 30 cm from a convex lens of focal length 20 cm. Find the image.
Solution: 1/v = 1/f + 1/u = 1/20 − 1/30 = 1/60. So v = +60 cm and m = v/u = 60/(−30) = −2. Real, inverted, twice the size, 60 cm behind the lens.
Worked example 3.5: An object is 30 cm from a concave lens of focal length 15 cm. Find the image.
Solution: 1/v = −1/15 − 1/30 = −3/30. So v = −10 cm and m = (−10)/(−30) = +1/3. Virtual, erect, one-third the size, 10 cm in front of the lens.
Worked example 3.6: A spectacle prescription reads −2.5 D. What kind of lens is it and what is its focal length?
Solution: Negative power means a concave (diverging) lens. f = 1/P = −1/2.5 = −0.4 m = −40 cm.
Worked example 3.7: A candle and a screen are 90 cm apart. Two positions of a convex lens, 30 cm apart, give sharp images of heights 8 cm and 2 cm. Find f and the candle's height.
Solution:
Candle height = √(8 × 2) = 4 cm.
Worked example 3.8 (NEET-hard): A glass (n = 1.5) equiconvex lens has f = 20 cm in air. It is dipped in a liquid of index 1.6. Find its focal length there and say how it behaves.
Solution: In air: 1/20 = 0.5 × K, where K = 1/R1 − 1/R2 = 0.1 cm⁻¹. In the liquid, the relative index is 1.5/1.6 = 0.9375.
f' = −160 cm. The convex lens now acts as a diverging lens of focal length 160 cm.
Quick revision
Single surface: n2/v − n1/u = (n2 − n1)/R; magnification n1v/(n2u).
Lens maker: 1/f = (n2/n1 − 1)(1/R1 − 1/R2).
Thin lens: 1/v − 1/u = 1/f; m = v/u.
Convex lens: positive f and P; concave lens: negative.
P = 1/f in metres, unit dioptre.
Minimum object–real image distance for a convex lens: 4f. Displacement method: f = (D² − d²)/4D, object height √(h1h2).
Covering half a lens dims the image but keeps it whole. Cutting perpendicular to the axis doubles f.
A lens in a denser liquid flips its nature.
NEET traps
Using the mirror formula sign (1/v + 1/u) for a lens.
Using m = −v/u for a lens. For lenses m = +v/u.
Plugging f in cm into P = 1/f and getting power in the wrong unit. Convert f to metres.
Thinking a half-covered lens forms half an image.
Assuming a convex lens always converges. In a denser liquid it diverges.
Forgetting that n1 in the single-surface formula is the medium the light comes from.
Practice MCQs: Chapter 3
Level 1: Concept check
1. A convex lens has focal length 25 cm. Its power is (a) +4 D (b) −4 D (c) +0.04 D (d) +25 D
2. One dioptre equals (a) 1 m (b) 1 cm⁻¹ (c) 1 m⁻¹ (d) 1 cm
3. For a real object, a concave lens always forms an image that is (a) real and inverted (b) virtual, erect and diminished (c) virtual, erect and enlarged (d) real and diminished
4. An object is placed at 2F1 of a convex lens. The image is (a) at F2, point-sized (b) beyond 2F2, enlarged (c) virtual and erect (d) at 2F2, real, inverted, same size
5. The focal length given by the lens maker formula does not depend on (a) the object distance (b) the refractive index of the lens (c) the radii of curvature (d) the surrounding medium
6. A glass convex lens is placed in a liquid of the same refractive index. Its focal length becomes (a) zero (b) half (c) infinite (d) unchanged
7. A lens has power −2 D. It is a (a) convex lens of focal length 50 cm (b) concave lens of focal length 50 cm (c) concave lens of focal length 2 m (d) convex lens of focal length 2 cm
8. The lower half of a convex lens is covered with black paper. The image of an object (a) loses its lower half (b) loses its upper half (c) disappears (d) is complete but dimmer
9. An object lies between the focus and the optical centre of a convex lens. The image is (a) virtual, erect and enlarged (b) real, inverted and enlarged (c) virtual, erect and diminished (d) at infinity
10. The magnification produced by a thin lens is (a) −v/u (b) u/v (c) v/u (d) −u/v
Level 2: NEET standard
11. An equiconvex lens (n = 1.5) has both radii 30 cm. Its focal length is (a) 15 cm (b) 30 cm (c) 60 cm (d) 20 cm
12. An object is 15 cm from a convex lens of focal length 10 cm. The image is formed (a) 6 cm on the same side (b) 30 cm on the same side (c) 6 cm on the other side (d) 30 cm on the other side
13. An object is 20 cm from a concave lens of focal length 20 cm. The magnification is (a) +0.5 (b) −0.5 (c) +2 (d) +1
14. A plano-convex lens (n = 1.6) has a curved surface of radius 15 cm. Its power is (a) +2.5 D (b) +6 D (c) +4 D (d) −4 D
15. A glass lens (n = 1.5) has focal length 20 cm in air. In water (n = 4/3) its focal length is (a) 40 cm (b) 80 cm (c) 26.7 cm (d) 160 cm
16. A convex lens forms a real image three times the size of an object placed 20 cm from it. Its focal length is (a) 30 cm (b) 10 cm (c) 60 cm (d) 15 cm
17. For a convex lens of focal length 12 cm, the minimum distance between an object and its real image is (a) 48 cm (b) 24 cm (c) 12 cm (d) 36 cm
18. An object and a screen are 100 cm apart. Two positions of a convex lens 20 cm apart give sharp images. The focal length is (a) 25 cm (b) 20 cm (c) 24 cm (d) 16 cm
19. Parallel rays in air fall on the convex end (radius 20 cm) of a long glass rod (n = 1.5). They focus inside the rod at a distance from the end of (a) 40 cm (b) 60 cm (c) 20 cm (d) 30 cm
20. An equiconvex lens of focal length 20 cm is cut into two identical plano-convex lenses by a plane perpendicular to its axis. The focal length of each piece is (a) 10 cm (b) 20 cm (c) 30 cm (d) 40 cm
21. In the displacement method, the two sharp images are 9 cm and 4 cm tall. The object height is (a) 6 cm (b) 6.5 cm (c) 5 cm (d) 13 cm
22. A convex lens of glass (n = 1.5) is dipped in carbon disulphide (n = 1.63). It now behaves as (a) a converging lens of shorter focal length (b) a plane glass plate (c) a diverging lens (d) a converging lens of longer focal length
Level 3: Challenge
23. A glass (n = 1.5) equiconvex lens of focal length 20 cm in air is placed in a liquid of index 1.6. Its focal length becomes (a) +160 cm (b) −160 cm (c) −80 cm (d) +32 cm
24. Parallel light falls on a glass sphere (n = 1.5) of radius 10 cm. The light focuses at a distance from the far surface of the sphere of (a) 15 cm (b) 10 cm (c) 20 cm (d) 5 cm
25. An object moves along the axis towards a convex lens of focal length 20 cm at 1 cm/s. When it is 30 cm from the lens, the image moves (a) at 4 cm/s away from the lens (b) at 4 cm/s towards the lens (c) at 2 cm/s away from the lens (d) at 0.25 cm/s towards the lens
26. A plano-convex lens (n = 1.5) has focal length 20 cm. The radius of its curved surface is (a) 40 cm (b) 20 cm (c) 10 cm (d) 30 cm
27. A convexo-concave lens (n = 1.5) has R1 = +10 cm and R2 = +20 cm. Its focal length is (a) +20 cm (b) +40 cm (c) −40 cm (d) +13.3 cm
28. A small air bubble sits at the centre of a solid glass sphere (n = 1.5) of radius 6 cm. Seen from outside, the bubble appears (a) at the centre (b) 4 cm from the near surface (c) 9 cm from the near surface (d) at the near surface
29. Assertion (A): If half of a convex lens is covered, only half the image of an object is formed. Reason (R): Every part of a lens forms a complete image of the object. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: The focal length of a glass lens is greater for red light than for violet light. Statement II: The lens maker formula is exact for lenses of any thickness. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | a | P = 1/0.25 m = +4 D |
| 2 | c | Dioptre is the inverse metre |
| 3 | b | Image lies between O and F, virtual and smaller |
| 4 | d | 2F to 2F, magnification −1 |
| 5 | a | f depends on n and radii only |
| 6 | c | Relative index 1 makes 1/f zero |
| 7 | b | f = −1/2 m = −50 cm |
| 8 | d | Each part forms the whole image; less light |
| 9 | a | Same as a magnifying glass |
| 10 | c | For lenses m = v/u |
| 11 | b | 1/f = 0.5(1/30 + 1/30) = 1/30 |
| 12 | d | 1/v = 1/10 − 1/15 = 1/30, v = +30 cm |
| 13 | a | v = −10 cm, m = (−10)/(−20) = 0.5 |
| 14 | c | f = 15/0.6 = 25 cm, P = 4 D |
| 15 | b | (0.5)/(0.125) = 4 times longer |
| 16 | d | v = +60, 1/f = 1/60 + 1/20 = 1/15 |
| 17 | a | 4f = 48 cm |
| 18 | c | (10000 − 400)/400 = 24 cm |
| 19 | b | 1.5/v = 0.5/20, v = 60 cm |
| 20 | d | Each half has one curved surface: f doubles |
| 21 | a | √(9 × 4) = 6 cm |
| 22 | c | Relative index below 1 makes f negative |
| 23 | b | (1.5/1.6 − 1)(0.1) = −1/160 |
| 24 | d | First image 30 cm from front; second surface gives v = +5 cm |
| 25 | a | v = 60, m = −2, dv/dt = m² du/dt = +4 cm/s |
| 26 | c | 1/20 = 0.5/R gives R = 10 cm |
| 27 | b | 1/f = 0.5(1/10 − 1/20) = 1/40 |
| 28 | a | Rays from the centre leave along the normal, undeviated |
| 29 | d | A false (full, dimmer image); R true |
| 30 | c | n(red) is smaller so f(red) is larger; formula is for thin lenses |
Chapter 3 revision sheet
One-page summary
Single spherical surface: n2/v − n1/u = (n2 − n1)/R, with R positive if the centre lies on the side light goes to.
Surface magnification: m = (n1 v)/(n2 u).
First focal length of a surface: −n1R/(n2 − n1); second focal length: n2R/(n2 − n1).
Lens maker's formula: 1/f = (n − 1)(1/R1 − 1/R2) for a thin lens in air.
In a medium of index nm, replace (n − 1) by (n/nm − 1).
Glass lens (1.5) in water (4/3): focal length becomes 4 times; in a liquid of n = 1.5 it acts like a plane sheet; in a denser liquid a convex lens diverges.
Thin lens formula: 1/v − 1/u = 1/f; magnification m = v/u = f/(f + u).
Convex lens: object beyond 2F gives a real diminished image between F and 2F; at 2F gives same size at 2F; between F and 2F gives magnified real; inside F gives virtual magnified.
Concave lens with a real object: always virtual, erect, diminished.
Minimum distance between a real object and its real image for a convex lens is 4f.
Displacement method: f = (D² − x²)/(4D), object height = √(h1 h2), needs D greater than 4f.
Covering part of a lens keeps the full image but makes it dimmer.
Power P = 1/f with f in metres; unit dioptre (D). Converging lens positive, diverging negative.
f depends on wavelength through n: fviolet is shorter than fred for a convex lens.
Must-remember table
| Item | Formula or value | Note |
|---|---|---|
| Spherical surface | n2/v − n1/u = (n2 − n1)/R | Signs as for lenses |
| Lens maker | 1/f = (n − 1)(1/R1 − 1/R2) | Equiconvex: f = R/[2(n − 1)] |
| Plano-convex | f = R/(n − 1) | n = 1.5 gives f = 2R |
| Thin lens | 1/v − 1/u = 1/f | Real object u negative |
| Magnification | m = v/u = f/(f + u) | Negative = real, inverted |
| Power | P = 1/f (metres) | 1 D = 1 m⁻¹ |
| Lens in liquid | f'/f = (n − 1)/(n/nl − 1) | Glass in water: ×4 |
| Displacement method | f = (D² − x²)/(4D) | h0 = √(h1 h2) |
Memory aids
"New over V minus Old over U": n2/v − n1/u, the new medium goes with v and the old one with u.
"Four-fold in water": a 1.5 glass lens in water has four times its air focal length.
"Half covered, Whole image, Weaker light" (HWW): covering half a lens only dims the image.
"Four f is the floor": 4f is the least object-to-screen distance for a real image.
"Plus Power Pulls together": positive power means a converging lens.
Concept connections
Snell's law from Chapter 2 is the base step of the single-surface derivation; the same small-angle ideas appear in Physics Book 1: Physics and Measurement.
The u–v method for a convex lens and the 1/v–1/u graph are in Physics Book 20: Experimental Skills.
Lenses in the eye and spectacles connect to the biology of vision in Biology Book 5: Human Physiology.
Practice MCQs: Chapter 3, Level 4 (new NEET pattern)
31. Match each thin lens in air (List I) with its focal length (List II).
List I: (A) Equiconvex, R = 20 cm, n = 1.5 (B) Plano-convex, R = 20 cm, n = 1.5 (C) Equiconcave, R = 30 cm, n = 1.5 (D) Equiconvex, R = 20 cm, n = 1.6
List II: (i) −30 cm (ii) 40 cm (iii) 20 cm (iv) about 16.7 cm
(a) A-ii, B-iii, C-i, D-iv (b) A-iii, B-iv, C-i, D-ii (c) A-iii, B-ii, C-iv, D-i (d) A-iii, B-ii, C-i, D-iv
32. A convex lens has f = 20 cm. Match the object distance (List I) with the image (List II).
List I: (A) u = −60 cm (B) u = −40 cm (C) u = −30 cm (D) u = −10 cm
List II: (i) Virtual, erect, m = +2 (ii) Real, m = −1 (iii) Real, m = −0.5 (iv) Real, m = −2
(a) A-iii, B-ii, C-iv, D-i (b) A-ii, B-iii, C-iv, D-i (c) A-iii, B-iv, C-ii, D-i (d) A-iv, B-ii, C-iii, D-i
33. Match the focal length (List I) with the power (List II).
List I: (A) +25 cm (B) −50 cm (C) +2 m (D) −20 cm
List II: (i) −5 D (ii) +0.5 D (iii) +4 D (iv) −2 D
(a) A-ii, B-iv, C-iii, D-i (b) A-iii, B-i, C-ii, D-iv (c) A-iii, B-iv, C-ii, D-i (d) A-iv, B-iii, C-i, D-ii
34. Match the idea in List I with its relation in List II.
List I: (A) Refraction at one spherical surface (B) Lens maker's formula (C) Magnification of a thin lens (D) Power of a lens
List II: (i) v/u (ii) n2/v − n1/u = (n2 − n1)/R (iii) 1/f with f in metres (iv) 1/f = (n − 1)(1/R1 − 1/R2)
(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-iv, C-i, D-iii (c) A-ii, B-iv, C-iii, D-i (d) A-i, B-iv, C-ii, D-iii
35. A glass convex lens (n = 1.5) has f = 20 cm in air. How many of these statements are correct?
A. In water (n = 4/3) its focal length becomes 80 cm.
B. In a liquid of n = 1.5 it behaves like a plane glass sheet.
C. In a liquid of n = 1.7 it acts as a diverging lens.
D. Its focal length is the same for red and violet light.
(a) 2 (b) 4 (c) 1 (d) 3
36. The lower half of a convex lens is covered with black paper. Choose the correct set of statements.
A. The full image of the object is still formed.
B. The image becomes less bright.
C. The image size is halved.
D. The focal length does not change.
(a) A and B only (b) B and C only (c) A, B and D only (d) A, C and D only
37. Choose the correct set of statements about thin lenses.
A. A convex lens always forms a real image.
B. A concave lens always forms a virtual, erect, diminished image of a real object.
C. The least distance between a real object and its real image formed by a convex lens is 4f.
D. A lens has two principal foci, one on each side.
(a) A and B only (b) B, C and D only (c) A, C and D only (d) A, B, C and D
38. A convex refracting surface (R = +10 cm) separates air from glass (n = 1.5). A point object in air is 30 cm from the surface. Choose the correct set of statements.
A. The image is real and 90 cm inside the glass.
B. The lateral magnification is −2.
C. The second focal length is 30 cm.
D. The first focal length is −30 cm.
(a) A, B and C only (b) A and D only (c) B, C and D only (d) A and B only
39. For a convex lens, a graph of 1/v (y-axis) against 1/u (x-axis), with signed values, is a straight line of slope +1 that cuts the 1/v axis at +0.05 cm⁻¹. The power of the lens is (a) −5 D (b) +0.05 D (c) +5 D (d) +20 D
40. A student uses one convex lens and records these readings.
| u (cm) | −25 | −30 | −40 | −60 |
|---|---|---|---|---|
| v (cm) | +90 | +60 | +40 | +30 |
Which reading does not fit the others? (a) u = −30 cm (b) u = −40 cm (c) u = −60 cm (d) u = −25 cm
41. For a convex lens and a real object, the v–u curve meets the line v = −u at the point (−40 cm, +40 cm). For an object at u = −30 cm the image is at (a) +60 cm (b) +30 cm (c) +40 cm (d) −60 cm
Case for Q42–Q43: A candle and a screen are fixed 90 cm apart on an optical bench. A convex lens placed between them gives a sharp image at two positions 30 cm apart. The two images are 9 cm and 4 cm tall.
42. The focal length of the lens is (a) 22.5 cm (b) 20 cm (c) 18 cm (d) 15 cm
43. The height of the candle flame is (a) 6.5 cm (b) 5 cm (c) 6 cm (d) 13 cm
44. A glass lens (n = 1.5) has f = +20 cm in air. In a certain liquid it becomes a diverging lens of focal length −60 cm. The refractive index of the liquid is (a) 1.6 (b) 1.65 (c) 2.0 (d) 1.8
45. A convex lens of focal length 12 cm forms on a screen an image three times the size of the object. The distance between the object and the screen is (a) 48 cm (b) 64 cm (c) 60 cm (d) 72 cm
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | d | R/[2(n − 1)] = 20; R/(n − 1) = 40; −30; 20/(2 × 0.6) = 16.7 cm |
| 32 | a | v = 30, 40, 60, −20 cm give m = −0.5, −1, −2, +2 |
| 33 | c | P = 1/f in metres: +4, −2, +0.5, −5 D |
| 34 | b | Standard forms of the four relations |
| 35 | d | A: factor (0.5)/(0.125) = 4; B and C true; D false since n depends on colour |
| 36 | c | Every part of the lens forms the whole image; less light means a dimmer image |
| 37 | b | A is false: an object inside F gives a virtual image |
| 38 | a | 1.5/v = 0.05 − 1/30 gives v = 90; m = 90/(1.5 × −30) = −2; f2 = 1.5 × 10/0.5 = 30; f1 = −20 cm |
| 39 | c | Intercept = 1/f, so f = 20 cm = 0.2 m, P = +5 D |
| 40 | d | Others give f = 20 cm; for u = −25 cm, v should be +100 cm |
| 41 | a | v = −u at u = −2f, so f = 20 cm; 1/v = 1/20 − 1/30 gives v = +60 cm |
| 42 | b | f = (90² − 30²)/(4 × 90) = 7200/360 = 20 cm |
| 43 | c | h0 = √(9 × 4) = 6 cm |
| 44 | d | −3 = 0.5/(1.5/nl − 1) gives 1.5/nl = 5/6, nl = 1.8 |
| 45 | b | v = 3x, u = −x: 1/(3x) + 1/x = 1/12 gives x = 16 cm, v = 48 cm, total 64 cm |