Chapter 4: Combination of Lenses and Lens–Mirror Systems
What you will learn
The focal length and power of thin lenses in contact, with the derivation.
How to handle two lenses separated by a distance, by successive images.
Magnification of a multi-lens system.
Silvered lenses and the rule P = 2P(lens) + P(mirror).
Lens–mirror arrangements, including the pin-coincidence (autocollimation) method.
4.1 Thin lenses in contact: derivation
Camera lenses, microscope objectives and even your spectacles combine lenses to get the power they need. Start with two thin lenses A and B, of focal lengths f1 and f2, touching each other on a common axis.
An object O sits at distance u from the pair. Lens A alone would form an image I1 at distance v1:
The light reaching B is heading for I1, so I1 is the object for B. The lenses are thin and touching, so I1 is at distance v1 from B too. B forms the final image at v:
Add the two equations. The 1/v1 terms cancel:
The pair acts as a single lens of focal length F where
Powers add with their signs. A +5 D lens and a −3 D lens in contact give +2 D.
For a system of lenses (in contact or not), the total magnification is the product of the separate magnifications:
Nature of the combination. For a convex lens f1 and a concave lens of focal length magnitude f2 in contact:
| Condition | Combined power | Behaviour |
|---|---|---|
| f1 less than f2 | Positive | Converging |
| f1 equal to f2 | Zero | Like a plane glass sheet |
| f1 greater than f2 | Negative | Diverging |
The stronger lens (shorter focal length) decides the nature.
4.2 Lenses separated by a distance
When two lenses are a distance d apart, the cleanest method is successive images. Find the image formed by the first lens. Measure its position from the second lens. Use that as the object for the second lens. If the first image lies beyond the second lens, it is a virtual object with positive u.
For a parallel beam, this gives the equivalent focal length of two separated thin lenses in air:
Put d = 0 and you recover the contact formula. If d = f1 + f2, then 1/F = 0: a parallel beam comes out parallel. That is exactly how a telescope in normal adjustment works (Chapter 6).
4.3 Silvered lenses
Silver one face of a lens and it becomes a mirror. Light passes through the lens, reflects from the silvered face, and passes through the lens again. So the lens acts twice and the mirror once.
Count every element by its converging power: a convex lens +1/f(lens), a concave mirror +1/f(mirror) using the magnitude, a plane mirror zero. The system acts as a concave mirror with
| Silvered lens (index n, radius R) | P(lens) | P(mirror) | Equivalent focal length F |
|---|---|---|---|
| Plano-convex, plane face silvered | (n − 1)/R | 0 | R/[2(n − 1)] |
| Plano-convex, curved face silvered | (n − 1)/R | 2/R | R/(2n) |
| Equiconvex, one face silvered | 2(n − 1)/R | 2/R | R/(4n − 2) |
For n = 1.5 the three results are R, R/3 and R/4. Learn these: NEET has asked them in many forms.
4.4 Lens–mirror arrangements
Convex lens with a plane mirror behind it. Place a pin in front of a convex lens with a plane mirror just behind. When the pin is at the focus, light leaves the lens parallel, reflects straight back, and the lens focuses it on the pin again. The image coincides with the pin, with no parallax. This pin-coincidence (autocollimation) method gives f directly.
Convex lens with a convex mirror behind it. Here the image coincides with the object when the lens forms its image at the mirror's centre of curvature. Then rays strike the mirror normally and retrace their path.
Liquid between a lens and a mirror. A few drops of water under a convex lens resting on a plane mirror form a thin plano-concave water lens. The pin-coincidence distance then gives the focal length of the glass–water pair. From it, the refractive index of the liquid can be found.
A slab in a converging beam. A glass slab of thickness t placed in light converging to a point shifts that point by t(1 − 1/n) in the direction the light travels.
Worked example 4.1: A convex lens of focal length 20 cm touches a concave lens of focal length 40 cm. Find the focal length and power of the pair.
Solution:
F = +40 cm = 0.4 m, a converging pair of power +2.5 D.
Worked example 4.2: Lenses of power +5 D and −3 D are in contact. Find the focal length.
Solution: P = +2 D, so F = 1/2 m = 50 cm, converging.
Worked example 4.3: Two convex lenses of focal lengths 10 cm and 20 cm are 5 cm apart. Find the equivalent focal length.
Solution:
F = 8 cm.
Worked example 4.4: An object is 30 cm in front of a convex lens of focal length 20 cm. A second convex lens of focal length 10 cm is 40 cm behind the first. Find the final image and total magnification.
Solution: First lens: 1/v1 = 1/20 − 1/30 = 1/60, so v1 = 60 cm and m1 = 60/(−30) = −2.
This image would form 20 cm beyond the second lens, so it is a virtual object for it: u2 = +20 cm.
v2 = 6.67 cm behind the second lens, and m2 = 6.67/20 = 1/3. Total m = −2 × 1/3 = −2/3. The final image is real, inverted and two-thirds the object size.
Worked example 4.5: A plano-convex lens (n = 1.5, R = 20 cm) is silvered on its plane face. An object is 30 cm in front of it. Find the image.
Solution: F = R/[2(n − 1)] = 20 cm. Treat it as a concave mirror with f = −20 cm and u = −30 cm:
v = −60 cm: a real image 60 cm in front.
Worked example 4.6: The same lens is silvered on its curved face instead. Find the equivalent focal length.
Solution: P = 2(n − 1)/R + 2/R = 2n/R. F = R/(2n) = 20/3 ≈ 6.7 cm.
Worked example 4.7: An equiconvex lens (n = 1.5, R = 30 cm) has one face silvered. An object is 10 cm in front. Where is the image?
Solution: F = R/(4n − 2) = 30/4 = 7.5 cm. As a concave mirror, f = −7.5, u = −10:
v = −30 cm: a real image 30 cm in front.
Worked example 4.8 (NEET-hard): An equiconvex glass lens (n = 1.5, R = 20 cm) rests on a plane mirror, with water (n = 4/3) filling the gap below it. A pin above the lens coincides with its own image. How high is the pin?
Solution: Glass lens: 1/fg = 0.5(2/20), so fg = 20 cm. The water forms a plano-concave lens of radius 20 cm:
Combined: 1/F = 1/20 − 1/60 = 1/30, so F = 30 cm. With a plane mirror below, the pin coincides with its image at the focus. The pin is 30 cm above the lens.
Quick revision
Lenses in contact: 1/F = 1/f1 + 1/f2; P = P1 + P2 (with signs).
Total magnification = product of individual magnifications.
Separated lenses: 1/F = 1/f1 + 1/f2 − d/(f1f2), or work image by image.
d = f1 + f2 gives zero power: parallel light stays parallel.
Silvered lens: P = 2P(lens) + P(mirror); acts as a concave mirror of focal length 1/P.
Plano-convex (n = 1.5): plane face silvered F = R; curved face silvered F = R/3. Equiconvex silvered: F = R/4.
Pin coincides with its own image when light hits the mirror normally: at F (plane mirror) or with the lens image at C (curved mirror).
NEET traps
Adding focal lengths instead of powers for lenses in contact.
Dropping the sign of a concave lens when adding powers.
Counting the lens only once in a silvered lens. Light crosses it twice.
Forgetting that a first image lying beyond the second lens is a virtual object with positive u.
Adding magnifications of a lens system instead of multiplying them.
Practice MCQs: Chapter 4
Level 1: Concept check
1. Lenses of power +3 D and −1 D are in contact. The power of the pair is (a) +4 D (b) +2 D (c) −2 D (d) −3 D
2. Two convex lenses, each of focal length 20 cm, are in contact. The focal length of the pair is (a) 40 cm (b) 20 cm (c) 5 cm (d) 10 cm
3. For thin lenses in contact, the equivalent power is (a) the algebraic sum of the powers (b) the product of the powers (c) the mean of the powers (d) the sum of the focal lengths
4. A convex lens of focal length 25 cm touches a concave lens of focal length 25 cm. The pair behaves as (a) a convex lens of focal length 12.5 cm (b) a concave lens of focal length 50 cm (c) a plane glass plate (d) a convex lens of focal length 50 cm
5. The magnification of a system of two lenses is (a) m1 + m2 (b) m1 × m2 (c) m1/m2 (d) m1 − m2
6. A plano-convex lens silvered on its plane face behaves like (a) a concave mirror (b) a convex mirror (c) a plane mirror (d) a diverging lens
7. Lenses of power +4 D and −2.5 D are in contact. The focal length of the pair is about (a) 15 cm (b) −66.7 cm (c) 40 cm (d) 66.7 cm
8. A pin is at the focus of a convex lens with a plane mirror placed just behind the lens. The final image forms (a) at infinity (b) at 2f behind the lens (c) at the pin itself (d) at f behind the mirror
9. A convex lens of focal length f1 touches a concave lens of focal length magnitude f2. The pair is diverging if (a) f1 is less than f2 (b) f1 is greater than f2 (c) f1 equals f2 (d) never
10. Two thin lenses, each of power P, are in contact. The combined power is (a) 2P (b) P/2 (c) P² (d) P
Level 2: NEET standard
11. A convex lens of focal length 15 cm touches a concave lens of focal length 30 cm. The combination is (a) diverging, 30 cm (b) converging, 10 cm (c) converging, 30 cm (d) diverging, 10 cm
12. Lenses of power +5 D and −2 D are in contact. The focal length of the pair is (a) 33.3 cm (b) 20 cm (c) 50 cm (d) 14.3 cm
13. Two convex lenses of focal lengths 20 cm and 30 cm are 10 cm apart. The equivalent focal length is (a) 12 cm (b) 25 cm (c) 50 cm (d) 15 cm
14. A plano-convex lens (n = 1.5, R = 30 cm) is silvered on its plane face. It acts as a concave mirror of focal length (a) 15 cm (b) 30 cm (c) 10 cm (d) 60 cm
15. A plano-convex lens (n = 1.5, R = 30 cm) is silvered on its curved face. It acts as a concave mirror of focal length (a) 30 cm (b) 15 cm (c) 10 cm (d) 7.5 cm
16. An equiconvex lens (n = 1.5) with both radii 20 cm is silvered on one face. Its equivalent focal length is (a) 5 cm (b) 10 cm (c) 20 cm (d) 6.7 cm
17. A convex lens of power 5 D is to be combined in contact with another lens to give a power of +2 D. The second lens has focal length (a) +50 cm (b) +33.3 cm (c) −50 cm (d) −33.3 cm
18. An object is 40 cm in front of a convex lens of focal length 20 cm. A convex lens of focal length 10 cm is 60 cm behind the first. The total magnification is (a) −1 (b) +1 (c) −2 (d) +0.5
19. Two identical plano-convex lenses (n = 1.5, R = 20 cm) are placed with their curved faces touching. The focal length of the pair is (a) 40 cm (b) 10 cm (c) 20 cm (d) 80 cm
20. A convex lens of focal length 10 cm touches a concave lens. The pair is converging with focal length 40 cm. The concave lens has focal length of magnitude (a) 13.3 cm (b) 8 cm (c) 30 cm (d) 50 cm
21. A convex lens would focus light 30 cm behind it. A glass slab 3 cm thick (n = 1.5) is placed in the converging beam, normal to the axis. The light now focuses at a distance from the lens of (a) 29 cm (b) 30 cm (c) 32 cm (d) 31 cm
22. A convex lens of focal length 40 cm touches a concave lens of focal length 25 cm. The power of the pair is (a) +1.5 D (b) −1.5 D (c) +6.5 D (d) −6.5 D
Level 3: Challenge
23. A convex lens of focal length 20 cm and a concave lens of focal length 10 cm are placed 10 cm apart on a common axis. A parallel beam falls on the convex lens. The beam that emerges is (a) converging to a point 10 cm away (b) diverging from a point 20 cm away (c) parallel (d) converging to a point 20 cm away
24. An object is 30 cm in front of a convex lens of focal length 20 cm. A plane mirror is 10 cm behind the lens, normal to the axis. After reflection and a second passage through the lens, the final image is (a) 13.3 cm from the lens on the object side (b) 40 cm from the lens on the object side (c) 60 cm behind the lens (d) at the object itself
25. An object is 36 cm in front of a convex lens of focal length 24 cm. A convex mirror of radius of curvature 48 cm is placed behind the lens so that the final image coincides with the object. The lens–mirror distance is (a) 72 cm (b) 48 cm (c) 12 cm (d) 24 cm
26. An equiconvex glass lens (n = 1.5, R = 20 cm) rests on a plane mirror with water (n = 4/3) filling the gap. A pin coincides with its own image at a height above the lens of (a) 20 cm (b) 30 cm (c) 60 cm (d) 15 cm
27. A convex lens of focal length 30 cm touches a concave lens of focal length 20 cm. An object is 60 cm from the pair. The image is (a) real, 60 cm behind the pair (b) virtual, 60 cm on the object side (c) virtual, 30 cm on the object side (d) real, 30 cm behind the pair
28. A plano-convex lens (n = 1.5, R = 15 cm) is silvered on its curved face. An object placed in front of it coincides with its own image when its distance from the lens is (a) 5 cm (b) 15 cm (c) 30 cm (d) 10 cm
29. Assertion (A): A convex lens and a concave lens of equal and opposite powers, in contact, act like a plane glass plate. Reason (R): The powers of thin lenses in contact add algebraically. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: The focal length of thin lenses in contact is the sum of their focal lengths. Statement II: The total magnification of a lens system is the product of the individual magnifications. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | b | 3 − 1 = +2 D |
| 2 | d | 1/F = 1/20 + 1/20 = 1/10 |
| 3 | a | P = P1 + P2 with signs |
| 4 | c | Powers cancel, P = 0 |
| 5 | b | Magnifications multiply |
| 6 | a | Converging lens plus mirror gives a concave mirror |
| 7 | d | P = 1.5 D, F = 1/1.5 m = 66.7 cm |
| 8 | c | Parallel light reflects back and refocuses at the pin |
| 9 | b | Concave lens is stronger, so net power is negative |
| 10 | a | P + P = 2P |
| 11 | c | 1/15 − 1/30 = 1/30, positive |
| 12 | a | P = 3 D, F = 33.3 cm |
| 13 | d | 1/20 + 1/30 − 10/600 = 1/15 |
| 14 | b | F = R/[2(n − 1)] = 30 cm |
| 15 | c | F = R/(2n) = 30/3 = 10 cm |
| 16 | a | F = R/(4n − 2) = 20/4 = 5 cm |
| 17 | d | P2 = 2 − 5 = −3 D, f = −33.3 cm |
| 18 | b | m1 = −1 (image at 40 cm), u2 = −20 gives v2 = 20, m2 = −1; product +1 |
| 19 | c | Each f = 40 cm; pair 20 cm |
| 20 | a | 1/40 − 1/10 = −3/40, f = −13.3 cm |
| 21 | d | Shift t(1 − 1/n) = 1 cm along the light |
| 22 | b | 2.5 − 4 = −1.5 D |
| 23 | c | d = f1 + f2 (20 − 10 = 10 cm), so 1/F = 0 |
| 24 | a | Lens image 60 cm, mirror image 40 cm before lens acts as virtual object; v = 13.3 cm |
| 25 | d | Lens image at 72 cm must be at C: 72 − 48 = 24 cm |
| 26 | b | fg = 20, fw = −60, combined 30 cm |
| 27 | c | F = −60 cm; 1/v = −1/60 − 1/60, v = −30 cm |
| 28 | d | F = R/(2n) = 5 cm; image coincides at 2F = 10 cm |
| 29 | a | Equal and opposite powers sum to zero |
| 30 | d | I false (powers add, not focal lengths); II true |
Chapter 4 revision sheet
One-page summary
Thin lenses in contact: 1/F = 1/f1 + 1/f2 + …, so powers add: P = P1 + P2 + …
Total magnification of a system is the product: m = m1 × m2 × …
Convex and concave lenses of equal |f| in contact give P = 0: a plane sheet.
Two lenses separated by d: 1/F = 1/f1 + 1/f2 − d/(f1 f2), or P = P1 + P2 − d P1 P2.
If d = f1 + f2, a parallel beam leaves parallel (telescope in normal adjustment).
Step-by-step method: the image from the first lens becomes the object for the second, with u measured from the second lens.
A virtual object (light converging towards a point beyond the lens) has positive u.
Silvered lens acts as a mirror: P = 2P(lens) + P(mirror), and F = −1/P as a concave mirror when P is positive.
Plano-convex silvered on the plane face: F = R/[2(n − 1)]; silvered on the curved face: F = R/(2n).
Equiconvex silvered on one face: F = R/[2(2n − 1)].
Lens on a plane mirror: a pin coincides with its own image when it sits at the focus of the lens (or of the lens plus liquid).
A few drops of liquid between a convex lens and a plane mirror form a plano-concave liquid lens; 1/F(total) = 1/f(glass) + 1/f(liquid).
Lens–mirror systems: trace light lens → mirror → lens, taking care of the new direction after reflection.
Must-remember table
| Item | Formula or value | Note |
|---|---|---|
| Lenses in contact | P = P1 + P2 | f in metres for D |
| Separated lenses | P = P1 + P2 − dP1P2 | d in metres |
| System magnification | m = m1 m2 | Signs multiply |
| Silvered lens | P = 2PL + PM | Acts as a mirror |
| Plane face silvered | F = R/[2(n − 1)] | n = 1.5: F = R |
| Curved face silvered | F = R/(2n) | n = 1.5: F = R/3 |
| Equiconvex, one face silvered | F = R/[2(2n − 1)] | n = 1.5: F = R/4 |
| Liquid lens (plano-concave) | f = −R/(nl − 1) | R of the lens face |
Memory aids
"Powers Plus, focals Flip": add powers directly; add focal lengths only as reciprocals.
"Twice through the glass, once off the mirror" (2L + M): a silvered lens has P = 2PL + PM.
"d = f1 + f2, Parallel In, Parallel Out" (PIPO): the telescope condition.
"Image of one, Object of next": for separated lenses, always pass the image forward.
Concept connections
Separated lenses with d = fo + fe are exactly the telescope in Chapter 6 of this book.
Spectacle power and combined powers link to the eye and vision in Biology Book 5: Human Physiology.
Finding f of a convex lens by the pin method and the liquid-lens method is in Physics Book 20: Experimental Skills.
Practice MCQs: Chapter 4, Level 4 (new NEET pattern)
31. Match the pair of thin lenses in contact (List I) with the focal length of the pair (List II).
List I: (A) +10 D and −4 D (B) f = +20 cm and f = −20 cm (C) f = +20 cm and f = +20 cm (D) f = +30 cm and f = +60 cm
List II: (i) 10 cm (ii) 20 cm (iii) about 16.7 cm (iv) Infinite
(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-iv, C-i, D-ii (d) A-i, B-iv, C-iii, D-ii
32. Glass lenses with n = 1.5 are silvered as described in List I. Match with the focal length of the equivalent concave mirror in List II.
List I: (A) Plano-convex, R = 20 cm, plane face silvered (B) Plano-convex, R = 20 cm, curved face silvered (C) Equiconvex, R = 20 cm, one face silvered (D) Equiconvex, R = 40 cm, one face silvered
List II: (i) about 6.67 cm (ii) 20 cm (iii) 5 cm (iv) 10 cm
(a) A-i, B-ii, C-iii, D-iv (b) A-ii, B-i, C-iv, D-iii (c) A-ii, B-iii, C-i, D-iv (d) A-ii, B-i, C-iii, D-iv
33. Two thin lenses are placed coaxially a distance d apart. Match List I with the equivalent focal length in List II.
List I: (A) f1 = f2 = +20 cm, d = 10 cm (B) f1 = f2 = +20 cm, d = 40 cm (C) f1 = +20 cm, f2 = −20 cm, d = 10 cm (D) f1 = f2 = +20 cm, d = 0
List II: (i) 10 cm (ii) 40 cm (iii) Infinite (iv) about 13.3 cm
(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-iv, C-ii, D-i (c) A-iv, B-ii, C-iii, D-i (d) A-i, B-iii, C-ii, D-iv
34. In a two-element system, the magnifications of the two elements are given in List I. Match with the total magnification in List II.
List I: (A) −2 and −3 (B) −0.5 and −4 (C) −2 and +1.5 (D) +0.5 and −1
List II: (i) +6 (ii) −3 (iii) +2 (iv) −0.5
(a) A-i, B-ii, C-iii, D-iv (b) A-i, B-iii, C-ii, D-iv (c) A-iii, B-i, C-ii, D-iv (d) A-i, B-iii, C-iv, D-ii
35. Choose the correct set of statements about thin lenses in contact.
A. Their powers add.
B. A convex and a concave lens of equal focal length in contact act like a plane glass sheet.
C. Their focal lengths add.
D. The total magnification of a system is the product of the separate magnifications.
(a) A and C only (b) B, C and D only (c) A, B and D only (d) A, B, C and D
36. How many of these statements about a silvered plano-convex lens are correct?
A. It behaves like a concave mirror.
B. Silvering the curved face gives a shorter focal length than silvering the plane face.
C. Its power is P = 2P(lens) + P(mirror).
D. It behaves like a convex mirror.
(a) 3 (b) 2 (c) 4 (d) 1
37. Two convex lenses of focal lengths 20 cm and 30 cm are placed coaxially a distance d apart. Choose the correct set of statements.
A. For d = 50 cm, a parallel beam entering leaves as a parallel beam.
B. For d = 0, the equivalent focal length is 12 cm.
C. For d = 10 cm, the equivalent focal length is 15 cm.
D. For d = 60 cm, the system is converging.
(a) A and B only (b) A, B and C only (c) C and D only (d) A, B, C and D
38. An equiconvex lens (n = 1.5, f = 20 cm) rests on a plane mirror. A pin held above it coincides with its own image at 20 cm. A little liquid is then put between the lens and the mirror, and the coincidence point moves to 30 cm. How many of these statements are correct?
A. Without the liquid, the coincidence distance equals the focal length of the lens.
B. The liquid forms a plano-concave lens.
C. The focal length of the liquid lens is −30 cm.
D. The refractive index of the liquid is 1.5.
(a) 1 (b) 3 (c) 4 (d) 2
39. Two identical convex lenses are placed a distance d apart. The combined power is measured.
| d (cm) | 0 | 10 | 20 |
|---|---|---|---|
| Combined power (D) | 10 | 7.5 | 5 |
The focal length of each lens, and the separation at which the combined power becomes zero, are (a) 10 cm, 20 cm (b) 20 cm, 20 cm (c) 20 cm, 40 cm (d) 40 cm, 80 cm
40. A lab has four thin lenses of power +2 D, +5 D, −3 D and −1 D. Which pair placed in contact gives a converging combination of focal length 50 cm? (a) +2 D and −1 D (b) +5 D and −3 D (c) +2 D and +5 D (d) −3 D and −1 D
41. Set-up: a convex lens of focal length 20 cm stands at x = 0. A plane mirror faces it at x = 40 cm. An object is placed at x = −30 cm on the axis. After light passes the lens, reflects from the mirror and passes the lens again, the final image is (a) 20 cm to the left of the lens (b) on the object itself (c) 60 cm to the left of the lens (d) at infinity
Case for Q42–Q43: An object is 30 cm to the left of a convex lens L1 of focal length 15 cm. A concave lens L2 of focal length 20 cm is placed 20 cm to the right of L1 on the same axis.
42. The final image is formed (a) 20 cm to the right of L2 (b) 10 cm to the right of L2 (c) 40 cm to the right of L2 (d) at infinity
43. The total magnification and the nature of the final image are (a) +2, virtual and erect (b) −1, real and inverted (c) −2, real and inverted (d) +1, virtual and erect
44. An equiconvex lens (n = 1.5, R = 30 cm) is silvered on one face. An object is placed 20 cm in front of it. The image is (a) 7.5 cm in front, real (b) 12 cm in front, real and diminished (c) 12 cm behind, virtual (d) 30 cm in front, real and magnified
45. A convex lens of focal length 20 cm and a concave mirror of focal length 5 cm face each other on a common axis, 50 cm apart. An object is 40 cm to the left of the lens. After lens, mirror and lens again, the final image is (a) at infinity (b) 20 cm to the left of the lens, erect (c) 40 cm to the left of the lens, virtual (d) at the object's position, inverted and of the same size
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | c | P = 6 D gives 16.7 cm; P = 0; 1/F = 2/20; 1/F = 1/30 + 1/60 = 1/20 |
| 32 | d | R/[2(n − 1)] = 20; R/(2n) = 6.67; R/[2(2n − 1)] = 5 and 10 cm |
| 33 | a | 1/F = 1/f1 + 1/f2 − d/(f1f2): 13.3, infinite (d = f1 + f2), 40, 10 cm |
| 34 | b | m = m1 × m2 with signs |
| 35 | c | Focal lengths add only as reciprocals, so C is false |
| 36 | a | A, B, C true: R/(2n) is less than R/[2(n − 1)]; it is a concave mirror, not convex |
| 37 | b | d = 60: 1/F = (30 + 20 − 60)/600 is negative, so diverging |
| 38 | d | 1/30 = 1/20 + 1/fl gives fl = −60 cm; 60 = 20/(nl − 1) gives nl = 4/3 |
| 39 | c | P = 2/f at d = 0 gives f = 0.2 m; P = 2/f − d/f² = 0 at d = 2f = 40 cm |
| 40 | b | +5 − 3 = +2 D, f = 50 cm; no other pair gives +2 D |
| 41 | d | Lens image at x = 60; mirror image at x = 20, i.e. at the focus of the lens, so light leaves parallel |
| 42 | a | v1 = 30 cm, so u2 = +10 cm (virtual object); 1/v2 = −1/20 + 1/10, v2 = +20 cm |
| 43 | c | m1 = 30/(−30) = −1, m2 = 20/10 = 2, m = −2 |
| 44 | b | F = 30/4 = 7.5 cm concave; 1/v = −1/7.5 + 1/20, v = −12 cm, m = −0.6 |
| 45 | d | Lens image at 40 cm = centre of curvature of the mirror; light retraces, each step has m = −1, total −1 |