Chapter 6: Optical Instruments
What you will learn
What magnifying power (angular magnification) means and why it uses angles.
The simple microscope, with magnifying power at the near point and at infinity.
The compound microscope: ray diagram, magnifying power and tube length.
The refracting astronomical telescope in normal adjustment and at the near point.
The reflecting (Cassegrain) telescope and why big telescopes use mirrors.
6.1 Angular size and magnifying power
How big a thing looks depends on the angle it makes at the eye, not on its true size. A cricket ball held close looks bigger than the full moon. The image on the retina grows with this angle.
The eye cannot focus on objects closer than about 25 cm. This distance is the least distance of distinct vision, D = 25 cm, also called the near point. Without help, the largest angle a small object of height h can make at a relaxed but clear view is h/D.
An optical instrument increases this angle. Its magnifying power is
For a microscope, α is the angle with the object at the near point. For a telescope, α is the angle the distant object makes directly at the eye.
6.2 Simple microscope (magnifying glass)
A watchmaker's eyeglass or a reading lens is a single convex lens of short focal length f. The object is placed inside f, so the lens forms a virtual, erect, enlarged image.
Image at the near point (strained eye, maximum M). Put v = −D in the lens formula. The object distance is
With the eye close to the lens, β = h/|u| and α = h/D:
Image at infinity (relaxed eye). The object sits at the focus, so β = h/f:
A shorter focal length gives more magnification. But lenses of very short focal length distort the image, so a simple microscope rarely goes beyond about 10.
6.3 Compound microscope
To get large magnification, use two lenses. The objective has a very short focal length and small aperture and faces the object. The eyepiece (ocular) has a short focal length too, though larger than the objective's, and is near the eye.

The objective forms a real, inverted, enlarged image just inside the eyepiece's focus; the eyepiece turns it into a much larger virtual image that the eye sees.
The object is placed just beyond the focus of the objective.
The objective forms a real, inverted, enlarged image A'B'.
A'B' falls inside the focus of the eyepiece. The eyepiece acts as a simple microscope and gives a large virtual image.
The final image is inverted with respect to the object.
Magnifying power. The total magnification is the product of the two stages:
The objective's image lies at about distance L from it, where L is the tube length: the gap between the second focal point of the objective and the first focal point of the eyepiece. Using m = (f − v)/f for the objective, mo ≈ L/fo in magnitude.
| Final image at | Eyepiece magnification | Total magnifying power (magnitude) |
|---|---|---|
| Infinity (relaxed eye) | D/fe | (L/fo)(D/fe) |
| Near point | 1 + D/fe | (vo/uo)(1 + D/fe) |
Both fo and fe should be small for high M. The objective has the smaller of the two.
6.4 Astronomical (refracting) telescope
A telescope makes far-away objects, like the moon or Saturn's rings, look larger. The objective has a large focal length and a large aperture to collect plenty of light. The eyepiece has a small focal length.

Parallel rays from a distant object focus at the common focal point of the two lenses; the eyepiece sends them out parallel again, but at a larger angle, so the object looks bigger.
Parallel rays from a distant object form a real, inverted image at the focal plane of the objective. The eyepiece magnifies this image.
Normal adjustment (final image at infinity). The objective's image sits at the eyepiece's focus too. Let the image height be h. The object subtends α = h/fo at the objective (and so at the eye). The final image subtends β = h/fe:
Final image at the near point. The eyepiece object is now at |ue| where 1/|ue| = 1/fe + 1/D. Then β = h/|ue|:
The final image is inverted. For stars this does not matter. For a scene on Earth, a terrestrial telescope adds an erecting lens.
The objective's large aperture also sets how faint an object you can see. Light collected is proportional to the area, so to the square of the aperture diameter.
6.5 Reflecting telescope
Big modern telescopes use a concave mirror as the objective. In the Cassegrain design, a large concave (parabolic) primary mirror collects light and reflects it towards a small convex secondary mirror. The secondary sends the light back through a hole in the primary to the eyepiece or camera.
In normal adjustment, M = fo/fe, where fo = R/2 of the primary mirror.
| Point | Refracting telescope | Reflecting telescope |
|---|---|---|
| Objective | Large convex lens | Large concave mirror |
| Chromatic aberration | Present | Absent (reflection is the same for all colours) |
| Spherical aberration | Present | Removed by a parabolic mirror |
| Support | Only at the rim, so large lenses sag | Whole back surface can be supported |
| Cost of large aperture | Very high (flawless glass throughout) | Lower (only one surface must be perfect) |
| Magnifying power | fo/fe | fo/fe, with fo = R/2 |
Worked example 6.1: A reading lens has focal length 5 cm. Find its magnifying power with the image at the near point and at infinity.
Solution: Near point: M = 1 + 25/5 = 6. Infinity: M = 25/5 = 5.
Worked example 6.2: A compound microscope has fo = 1 cm and fe = 5 cm. An object is 1.1 cm from the objective, and the final image is at infinity. Find M and the distance between the lenses.
Solution: Objective: 1/vo = 1/1 − 1/1.1 = 1/11, so vo = 11 cm and mo = 11/(−1.1) = −10. Eyepiece at infinity: me = 25/5 = 5. M = −50, magnitude 50. The objective's image must sit at the eyepiece focus, so the lens separation is 11 + 5 = 16 cm.
Worked example 6.3: For the microscope of example 6.2, the final image is moved to the near point. Find M and the new lens separation.
Solution: me = 1 + 25/5 = 6, so the magnitude of M = 10 × 6 = 60. For the eyepiece, 1/|ue| = 1/5 + 1/25 = 6/25, so |ue| ≈ 4.17 cm. Lens separation ≈ 11 + 4.17 = 15.17 cm.
Worked example 6.4: A telescope has fo = 150 cm and fe = 5 cm. Find M and the tube length in normal adjustment.
Solution: M = 150/5 = 30. L = 150 + 5 = 155 cm.
Worked example 6.5: The same telescope is adjusted so the final image is at 25 cm. Find M and the tube length.
Solution: M = 30(1 + 5/25) = 36. |ue| = (25 × 5)/(25 + 5) ≈ 4.17 cm, so L ≈ 154.2 cm.
Worked example 6.6: The objective of a telescope has focal length 15 m. The moon has diameter 3.48 × 10^6 m and is 3.8 × 10^8 m away. Find the diameter of the moon's image formed by the objective.
Solution: The moon subtends α = 3.48 × 10^6 / 3.8 × 10^8 ≈ 9.16 × 10^−3 rad. The image size = fo × α = 15 × 9.16 × 10^−3 ≈ 0.137 m, about 13.7 cm.
Worked example 6.7: A reflecting telescope has a primary mirror of radius of curvature 4 m and an eyepiece of focal length 2 cm. Find its magnifying power in normal adjustment.
Solution: fo = R/2 = 2 m = 200 cm. M = 200/2 = 100.
Worked example 6.8 (NEET-hard): A compound microscope has fo = 2 cm, fe = 5 cm and the lenses 20 cm apart. The final image is at infinity. Find the object distance and the magnifying power.
Solution: For a final image at infinity, the objective's image must be at the eyepiece focus: vo = 20 − 5 = 15 cm.
mo = 15/(−2.31) = −6.5 and me = 25/5 = 5. The magnitude of M = 6.5 × 5 = 32.5.
Quick revision
M = angle at eye with instrument / angle without it. D = 25 cm.
Simple microscope: M = 1 + D/f (near point), D/f (infinity).
Compound microscope: M = mo × me; at infinity about (L/fo)(D/fe); both focal lengths short, fo smaller.
Telescope, normal adjustment: M = fo/fe, length fo + fe. At near point: M = (fo/fe)(1 + fe/D).
Telescope objective: long focal length, large aperture. Light gathered grows as aperture squared.
Reflecting telescope: no chromatic aberration, parabolic mirror removes spherical aberration, easier to support and cheaper at large size.
Final image in microscope and astronomical telescope is inverted.
NEET traps
Using fe/fo for a telescope. It is fo/fe.
Giving the telescope objective a short focal length. Short focal length is for microscope objectives.
Forgetting the “1 +” when the final image is at the near point.
Taking the length of a telescope at the near point as fo + fe. It is fo + |ue|, slightly less.
Saying a reflecting telescope has less magnification. Its advantage is image quality and light gathering, not M.
Practice MCQs: Chapter 6
Level 1: Concept check
1. The least distance of distinct vision for a normal eye is about (a) 10 cm (b) 25 cm (c) 50 cm (d) 100 cm
2. The magnifying power of a simple microscope with the image at the near point is (a) D/f (b) f/D (c) 1 − D/f (d) 1 + D/f
3. The objective of a compound microscope has (a) a short focal length and small aperture (b) a long focal length and large aperture (c) a long focal length and small aperture (d) zero power
4. The magnifying power of an astronomical telescope in normal adjustment is (a) fe/fo (b) fo × fe (c) fo/fe (d) fo + fe
5. For high magnifying power, an astronomical telescope needs (a) small fo and large fe (b) large fo and small fe (c) equal fo and fe (d) large fo and large fe
6. The final image formed by an astronomical telescope is (a) real and erect (b) virtual and erect (c) real and inverted (d) virtual and inverted
7. A reflecting telescope is better than a refracting one mainly because its objective (a) has no chromatic aberration (b) has a shorter focal length (c) gives an erect image (d) gives more magnification
8. The length of an astronomical telescope in normal adjustment is (a) fo − fe (b) fo/fe (c) fo + fe (d) fo × fe
9. A simple microscope of focal length 2.5 cm forms an image at infinity. Its magnifying power is (a) 11 (b) 10 (c) 2.5 (d) 25
10. The magnifying power of a compound microscope equals (a) the product of the magnifications of objective and eyepiece (b) their sum (c) their ratio (d) the magnification of the eyepiece alone
Level 2: NEET standard
11. A telescope has fo = 100 cm and fe = 5 cm. In normal adjustment its magnifying power is (a) 500 (b) 105 (c) 20 (d) 0.05
12. The length of the telescope in question 11 in normal adjustment is (a) 105 cm (b) 95 cm (c) 20 cm (d) 100 cm
13. A lens of focal length 5 cm is used as a simple microscope with the image at the near point. Its magnifying power is (a) 5 (b) 4 (c) 25 (d) 6
14. A telescope has fo = 120 cm and fe = 6 cm. With the final image at 25 cm, the magnifying power is (a) 20 (b) 24.8 (c) 15.2 (d) 26
15. The objective of a microscope forms an image 8 times the object size. The eyepiece has fe = 2.5 cm and the final image is at infinity. The magnitude of the magnifying power is (a) 18 (b) 20 (c) 80 (d) 88
16. A telescope in normal adjustment is 44 cm long and has magnifying power 10. The focal lengths of objective and eyepiece are (a) 40 cm, 4 cm (b) 4 cm, 40 cm (c) 22 cm, 22 cm (d) 30 cm, 3 cm
17. A reflecting telescope has a primary mirror of radius of curvature 3 m and an eyepiece of focal length 1.5 cm. Its magnifying power in normal adjustment is (a) 200 (b) 50 (c) 150 (d) 100
18. In a compound microscope, fo = 1 cm and the object is 1.25 cm from the objective. The eyepiece has fe = 2.5 cm and the final image is at infinity. The magnitude of the magnifying power is (a) 20 (b) 40 (c) 50 (d) 44
19. The aperture of a telescope objective is doubled. The light it collects becomes (a) double (b) half (c) four times (d) unchanged
20. A telescope objective of focal length 2 m views the moon, which subtends 0.5°. The diameter of the image formed by the objective is about (a) 1.75 cm (b) 1 cm (c) 3.5 cm (d) 0.87 cm
21. An astronomical telescope has magnifying power 15 in normal adjustment and an eyepiece of focal length 4 cm. The objective has focal length (a) 3.75 cm (b) 19 cm (c) 11 cm (d) 60 cm
22. A lens of focal length 10 cm is used as a magnifier with the image at the near point. The magnifying power is (a) 2.5 (b) 3.5 (c) 1.5 (d) 10
Level 3: Challenge
23. A compound microscope has fo = 2 cm, fe = 5 cm and its lenses 20 cm apart. With the final image at infinity, the magnitude of its magnifying power is (a) 25 (b) 50 (c) 32.5 (d) 37.5
24. A compound microscope has fo = 1 cm and fe = 5 cm. An object is 1.1 cm from the objective and the final image is at the near point (25 cm). The distance between the lenses is about (a) 15.2 cm (b) 16 cm (c) 11 cm (d) 21 cm
25. A telescope with fo = 150 cm and fe = 5 cm is set so that the final image is at 25 cm. The distance between the lenses is about (a) 155 cm (b) 145 cm (c) 175 cm (d) 154.2 cm
26. A telescope has magnifying power 20 in normal adjustment. If you look through it from the objective end, the angular magnification is (a) 20 (b) 0.05 (c) 1 (d) 400
27. You have four lenses of power 1 D, 4 D, 20 D and 25 D. The telescope with the largest magnifying power in normal adjustment has M equal to (a) 20 (b) 6.25 (c) 25 (d) 5
28. A compound microscope has tube length 16 cm, fo = 0.8 cm and fe = 2.5 cm. With the final image at infinity, the magnifying power is about (a) 20 (b) 10 (c) 30 (d) 200
29. Assertion (A): The largest modern optical telescopes use mirrors, not lenses, as objectives. Reason (R): A mirror has no chromatic aberration and can be supported over its whole back surface. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: The objective of a telescope has a smaller aperture than its eyepiece. Statement II: The final image formed by an astronomical telescope is erect. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | b | Near point D = 25 cm |
| 2 | d | Image at D gives M = 1 + D/f |
| 3 | a | It must form a large real image of a near object |
| 4 | c | β/α = (h/fe)/(h/fo) |
| 5 | b | M = fo/fe |
| 6 | d | Eyepiece image is virtual; the scene appears inverted |
| 7 | a | Reflection is the same for all colours |
| 8 | c | Focal points coincide between the lenses |
| 9 | b | 25/2.5 = 10 |
| 10 | a | M = mo × me |
| 11 | c | 100/5 = 20 |
| 12 | a | 100 + 5 = 105 cm |
| 13 | d | 1 + 25/5 = 6 |
| 14 | b | 20 × (1 + 6/25) = 24.8 |
| 15 | c | 8 × 25/2.5 = 80 |
| 16 | a | fo + fe = 44, fo = 10fe gives fe = 4 cm |
| 17 | d | fo = 1.5 m = 150 cm; 150/1.5 = 100 |
| 18 | b | vo = 5 cm, mo = −4, me = 10 |
| 19 | c | Light gathered goes as diameter squared |
| 20 | a | 2 m × 0.5° in radians = 0.0175 m |
| 21 | d | fo = 15 × 4 = 60 cm |
| 22 | b | 1 + 25/10 = 3.5 |
| 23 | c | vo = 15 cm, uo = −30/13 cm, mo = −6.5, me = 5 |
| 24 | a | vo = 11 cm, ue = 25/6 ≈ 4.17 cm; sum 15.17 cm |
| 25 | d | ue = 125/30 ≈ 4.17 cm; 150 + 4.17 |
| 26 | b | Roles swap: M = fe/fo = 1/20 |
| 27 | c | Objective 1 D (100 cm), eyepiece 25 D (4 cm) |
| 28 | d | (16/0.8)(25/2.5) = 20 × 10 |
| 29 | a | R gives the real reasons for A |
| 30 | b | Objective aperture is larger; final image is inverted |
Chapter 6 revision sheet
One-page summary
Apparent size depends on the angle an object makes at the eye; the eye sees clearly no closer than the near point D = 25 cm.
Magnifying power M = angle with the instrument ÷ angle with the naked eye (object at D for microscopes, at its real place for telescopes).
Simple microscope (convex lens): image at D gives M = 1 + D/f; image at infinity gives M = D/f.
Shorter f gives larger M, but lens defects limit a simple lens to M of about 10.
Compound microscope: objective (very short fo, small aperture) forms a real, inverted, magnified image; the eyepiece acts as a simple microscope.
M = mo × me. Image at infinity: M ≈ (L/fo)(D/fe); image at D: M ≈ (L/fo)(1 + D/fe).
Microscope final image is virtual and inverted relative to the object.
Astronomical telescope: objective has large fo and large aperture; eyepiece has small fe.
Normal adjustment (final image at infinity): M = fo/fe, tube length L = fo + fe.
Final image at D: M = (fo/fe)(1 + fe/D), tube length L = fo + feD/(fe + D).
Intermediate image of a distant object of angular size α has size fo × α.
Larger aperture: more light gathered (brighter image) and better resolving power.
Reflecting telescope (Newtonian or Cassegrain): concave paraboloidal primary, no chromatic aberration, less spherical aberration, easier support and cheaper for large sizes. Cassegrain uses a convex secondary mirror.
Must-remember table
| Instrument | Magnifying power | Tube length |
|---|---|---|
| Simple microscope, image at D | 1 + D/f | Not applicable |
| Simple microscope, image at infinity | D/f | Not applicable |
| Compound microscope, image at infinity | (L/fo)(D/fe) | About vo + fe |
| Compound microscope, image at D | (L/fo)(1 + D/fe) | vo + ue |
| Telescope, normal adjustment | fo/fe | fo + fe |
| Telescope, image at D | (fo/fe)(1 + fe/D) | fo + feD/(fe + D) |
Memory aids
"Microscope: both Small; Telescope: Big Over small": microscope fo and fe both small; telescope fo big, fe small.
"One more at the Near point": image at D adds 1 to D/f for a simple microscope.
"Telescope Tube = Total f": normal adjustment tube length L = fo + fe.
"Mirrors Make no Colours": reflecting telescopes have no chromatic aberration.
Concept connections
Telescope in normal adjustment is the separated-lens case d = f1 + f2 from Chapter 4 of this book.
Resolving power limits of a large aperture come from diffraction, Chapter 9 of this book.
The near point, accommodation and spectacles connect to Biology Book 5: Human Physiology.
Practice MCQs: Chapter 6, Level 4 (new NEET pattern)
31. Match the instrument setting in List I with its magnifying power in List II (D = 25 cm).
List I: (A) Simple microscope, image at D (B) Simple microscope, image at infinity (C) Compound microscope, final image at infinity (approximate) (D) Telescope in normal adjustment
List II: (i) fo/fe (ii) D/f (iii) (L/fo)(D/fe) (iv) 1 + D/f
(a) A-ii, B-iv, C-iii, D-i (b) A-iv, B-ii, C-iii, D-i (c) A-iv, B-ii, C-i, D-iii (d) A-iv, B-iii, C-ii, D-i
32. A simple microscope uses a lens of f = 5 cm, and a telescope uses fo = 100 cm and fe = 5 cm (D = 25 cm). Match List I with List II.
List I: (A) Microscope, image at near point (B) Microscope, image at infinity (C) Telescope, normal adjustment (D) Telescope, final image at near point
List II: (i) 24 (ii) 5 (iii) 6 (iv) 20
(a) A-ii, B-iii, C-iv, D-i (b) A-iii, B-ii, C-i, D-iv (c) A-iii, B-ii, C-iv, D-i (d) A-iv, B-ii, C-iii, D-i
33. Match the part in List I with its typical design in List II.
List I: (A) Objective of a refracting telescope (B) Eyepiece of a telescope (C) Objective of a compound microscope (D) Primary of a reflecting telescope
List II: (i) Very short focal length, small aperture (ii) Long focal length, large aperture (iii) Concave paraboloidal mirror (iv) Short focal length lens
(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-i, C-iv, D-iii (d) A-iii, B-iv, C-i, D-ii
34. Telescopes in normal adjustment use the lenses in List I. Match with the magnifying power and tube length in List II.
List I: (A) fo = 100 cm, fe = 5 cm (B) fo = 50 cm, fe = 2 cm (C) fo = 90 cm, fe = 3 cm (D) fo = 60 cm, fe = 6 cm
List II: (i) 30 and 93 cm (ii) 10 and 66 cm (iii) 20 and 105 cm (iv) 25 and 52 cm
(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-iv, C-i, D-ii
35. Choose the correct set of statements about a compound microscope.
A. The objective forms a real, inverted, magnified image.
B. The final image is virtual and inverted with respect to the object.
C. For high magnifying power, both fo and fe should be small.
D. Swapping the objective and the eyepiece leaves the magnifying power unchanged.
(a) A and B only (b) B and D only (c) A, B and C only (d) A, B, C and D
36. How many of these statements about an astronomical telescope are correct?
A. A larger objective aperture gives a brighter image and better resolution.
B. Magnifying power increases when fe is increased.
C. In normal adjustment the final image is at infinity.
D. Reflecting telescopes suffer more chromatic aberration than refracting ones.
(a) 1 (b) 2 (c) 3 (d) 4
37. A simple microscope uses a convex lens of f = 5 cm (D = 25 cm). Choose the correct set of statements.
A. Its largest magnifying power is 6.
B. A lens of f = 10 cm would give a larger magnifying power.
C. With the image at infinity, M = 5.
D. For the image at the near point, the object is about 4.17 cm from the lens.
(a) A, C and D only (b) A and B only (c) B and D only (d) A, B, C and D
38. How many of these statements about a Cassegrain reflecting telescope are correct?
A. Its primary is a concave mirror.
B. Its secondary mirror is convex.
C. A large mirror is easier to support than a large lens of the same size.
D. A smaller primary mirror gives a brighter image.
(a) 2 (b) 1 (c) 4 (d) 3
39. For a simple microscope with the image at the near point, a graph of M (y-axis) against 1/f (x-axis) is a straight line of slope 25 cm and intercept 1. The magnifying power for a lens of f = 2.5 cm is (a) 10 (b) 11 (c) 12.5 (d) 9
40. A student has four convex lenses.
| Lens | L1 | L2 | L3 | L4 |
|---|---|---|---|---|
| Focal length (cm) | 100 | 4 | 50 | 2 |
| Aperture (cm) | 10 | 1 | 5 | 0.5 |
The best astronomical telescope she can build has, in normal adjustment, a magnifying power of (a) 25 (b) 12.5 (c) 50 (d) 200
41. A refracting telescope has fo = 200 cm and fe = 5 cm. A distant tower makes an angle of 0.01 rad at the objective. In normal adjustment, the size of the image formed by the objective and the angle made by the final image at the eye are (a) 2 cm, 0.4 rad (b) 0.5 cm, 0.4 rad (c) 2 cm, 0.25 rad (d) 20 cm, 0.04 rad
Case for Q42–Q43: A compound microscope has fo = 1 cm and fe = 5 cm. A small insect wing is placed 1.1 cm from the objective, and the final image is formed at the near point (D = 25 cm).
42. The magnifying power is (a) 50 (b) 66 (c) 55 (d) 60
43. The separation between the objective and the eyepiece is about (a) 16 cm (b) 15.2 cm (c) 13.5 cm (d) 11 cm
44. A telescope has fo = 100 cm and fe = 10 cm, and the final image is at the near point (D = 25 cm). Its magnifying power is (a) 10 (b) 12.5 (c) 14 (d) 16
45. An elderly man has a near point of 50 cm. He uses a convex lens of f = 10 cm as a magnifier, with the image at his own near point. The magnifying power he gets is (a) 6 (b) 3.5 (c) 5 (d) 2.5
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | b | Standard magnifying-power formulas |
| 32 | c | 1 + 25/5 = 6; 25/5 = 5; 100/5 = 20; 20(1 + 5/25) = 24 |
| 33 | a | Telescope objective long f, large aperture; microscope objective very short f |
| 34 | d | M = fo/fe and L = fo + fe for each pair |
| 35 | c | M depends on fo and fe differently, so swapping changes it |
| 36 | b | Only A and C are true; M = fo/fe falls as fe rises; mirrors have no chromatic aberration |
| 37 | a | Longer f lowers M, so B is false; u = 25 × 5/30 = 4.17 cm |
| 38 | d | A, B, C true; a larger primary gathers more light |
| 39 | b | M = 1 + 25/2.5 = 11 |
| 40 | c | Objective L1 (largest f and aperture), eyepiece L4: M = 100/2 = 50 |
| 41 | a | Image size = fo × α = 200 × 0.01 = 2 cm; M = 40, angle = 40 × 0.01 = 0.4 rad |
| 42 | d | vo = 11 cm, mo = −10; me = 1 + 25/5 = 6; magnitude 60 |
| 43 | b | ue = 5 × 25/30 = 4.17 cm; L = 11 + 4.17 = 15.2 cm |
| 44 | c | M = (100/10)(1 + 10/25) = 14 |
| 45 | a | M = 1 + 50/10 = 6, judged against his own near point |