Chapter 5 of 12 · 25 min read

Chapter 3: Phenols

What you will learn

  • How phenols are named and made, including the cumene process.

  • Why phenol is far more acidic than ethanol, using the resonance of the phenoxide ion.

  • How –NO₂, –CH₃ and –OCH₃ groups change the acidity of phenol.

  • Halogenation, nitration and sulphonation of phenol, and the conditions that change the product.

  • The Reimer–Tiemann and Kolbe reactions, and the route to aspirin.

3.1 Structure and naming

In a phenol the –OH is joined directly to a carbon of a benzene ring. That carbon is sp². A lone pair on oxygen overlaps with the ring's π system. So the C–O bond gets some double-bond character.

As a result, the C–O bond in phenol (about 136 pm) is shorter than in methanol (about 142 pm). The sp² carbon also pulls electrons more than an sp³ carbon does.

StructureCommon nameIUPAC name
C₆H₅OHphenol, carbolic acidphenol
CH₃ ortho to –OHo-cresol2-methylphenol
CH₃ meta to –OHm-cresol3-methylphenol
CH₃ para to –OHp-cresol4-methylphenol
two –OH, orthocatecholbenzene-1,2-diol
two –OH, metaresorcinolbenzene-1,3-diol
two –OH, paraquinol (hydroquinone)benzene-1,4-diol

3.2 Preparation of phenol

Starting materialReagentsKey step
ChlorobenzeneNaOH at 623 K and 300 atm, then dilute HClCl is replaced by O⁻; the phenoxide is then acidified
Benzenesulphonic acidfuse with NaOH, then acidSO₃H is replaced by O⁻
Benzenediazonium chloridewarm with water (or dilute acid)N₂ gas leaves; –OH takes its place
Cumene (isopropylbenzene)O₂ (air), then dilute acidcumene hydroperoxide splits into phenol and propanone

The cumene process is the main industrial method. Its by-product, propanone (acetone), is itself valuable.

C6H5CH(CH3)2→O2C6H5C(CH3)2OOH→H+, H2OC6H5OH+CH3COCH3\mathrm{C_6H_5CH(CH_3)_2 \xrightarrow{O_2} C_6H_5C(CH_3)_2OOH \xrightarrow{H^+,\ H_2O} C_6H_5OH + CH_3COCH_3}

Phenols have higher boiling points than arenes and haloarenes of similar mass because of hydrogen bonding. Phenol is moderately soluble in water.

3.3 Acidic nature of phenol

Phenol reacts with sodium metal like an alcohol. But it also reacts with aqueous NaOH, which alcohols do not. It does not react with NaHCO₃, which carboxylic acids do.

C6H5OH+NaOH→C6H5O−Na++H2O\mathrm{C_6H_5OH + NaOH \rightarrow C_6H_5O^-Na^+ + H_2O}

The pKa of phenol is about 10.0, against 15.9 for ethanol. So phenol is roughly a million times stronger as an acid. Two reasons explain this.

  1. sp² carbon. The carbon holding –OH is sp² and more electronegative. It pulls electron density from oxygen, which makes the O–H bond more polar.

  2. Resonance of the phenoxide ion. After losing H⁺, the negative charge on oxygen spreads into the ring. It sits on the two ortho carbons and the para carbon, as well as on O. A spread-out charge means a more stable ion.

Figure 3.1 · Resonance structures of the phenoxide ion
Figure 3.1 · Resonance structures of the phenoxide ion

The negative charge sits on oxygen in form I and on the two ortho carbons and the para carbon in forms II to IV; this is why groups at ortho and para affect acidity most.

Phenol itself also has resonance forms. But in phenol those forms separate charge: O becomes positive while a ring carbon becomes negative. Separating charge costs energy. In phenoxide no charge is separated; the single negative charge just moves around. So resonance stabilises phenoxide much more than it stabilises phenol, and the equilibrium shifts towards ionisation.

The ethoxide ion has no such resonance. Its negative charge stays on one oxygen, and the ethyl group pushes more electron density onto it (+I effect).

3.4 Effect of substituents on acidity

A substituent on the ring changes how well the phenoxide ion holds its charge.

  • Electron-withdrawing groups (–NO₂, –CN, –CHO, halogen) pull charge away from O⁻ and stabilise the phenoxide. They increase acidity.

  • Electron-releasing groups (–CH₃, –OCH₃, –NH₂) push charge towards O⁻ and destabilise the phenoxide. They decrease acidity.

Position matters. A nitro group at ortho or para works by both –I and –R effects, because the ring charge can reach the nitro group by resonance. At meta only the –I effect acts. So p-nitrophenol (pKa 7.1) is much more acidic than m-nitrophenol (pKa 8.3).

o-Nitrophenol (pKa 7.2) is slightly weaker than p-nitrophenol. Its O–H forms an intramolecular hydrogen bond with the nearby nitro oxygen, which makes the H harder to remove.

Each extra nitro group at ortho or para adds more stabilisation. 2,4,6-Trinitrophenol (picric acid) has a pKa of about 0.5. It is as strong as many mineral acids and even reacts with NaHCO₃.

Methoxy is a special case. At para it releases electrons by resonance (+R), so p-methoxyphenol is weaker than phenol. At meta its resonance cannot reach the carbon next to O⁻, and only its –I effect acts, so m-methoxyphenol is slightly stronger than phenol.

Figure 3.2 · Approximate textbook pKa values at 25 °C
Figure 3.2 · Approximate textbook pKa values at 25 °C

Every nitrophenol sits left of the phenol line and every cresol just right of it; ethanol, with no ring to share the charge, is far weaker than all of them.

3.5 Reactions of the –OH group

Phenols form esters with acid chlorides and acid anhydrides, usually in pyridine or with a base. Direct reaction with carboxylic acids is slow.

The most famous example is aspirin. Salicylic acid (2-hydroxybenzoic acid) is acetylated by ethanoic anhydride to give acetylsalicylic acid.

HOC6H4COOH+(CH3CO)2O→H+CH3COOC6H4COOH+CH3COOH\mathrm{HOC_6H_4COOH + (CH_3CO)_2O \xrightarrow{H^+} CH_3COOC_6H_4COOH + CH_3COOH}

Three more reactions are useful in problems:

  • Zinc dust: heating phenol with zinc dust removes the oxygen and gives benzene.

  • Oxidation: chromic acid oxidises phenol to benzoquinone, a yellow conjugated diketone. Phenol left in air slowly turns pink for a similar reason.

  • Ferric chloride test: phenol gives a violet colour with neutral FeCl₃ solution. Alcohols do not.

3.6 Electrophilic substitution in phenol

The –OH group pushes electron density into the ring by resonance. This makes ortho and para positions richer in electrons. So –OH is an activating, ortho–para directing group. Phenol reacts much faster than benzene, often without a Lewis acid catalyst.

Halogenation. The solvent decides how far it goes.

ConditionsProductWhy
Br₂ in CS₂ or CHCl₃ at 273 Kmixture of o- and p-bromophenol (para major)non-polar solvent; Br₂ is weakly polarised, phenol is not ionised
Bromine water at room temperature2,4,6-tribromophenol, a white precipitatewater ionises phenol partly to the very reactive phenoxide and polarises Br₂

The instant white precipitate with bromine water is a quick test for phenol. Notice that no FeBr₃ is needed in either case.

Nitration.

  • Dilute HNO₃ at 298 K gives a mixture of o-nitrophenol and p-nitrophenol.

  • The two are separated by steam distillation. o-Nitrophenol has an intramolecular hydrogen bond, so its molecules hold each other weakly and it is steam volatile. p-Nitrophenol forms intermolecular hydrogen bonds and stays behind.

  • Concentrated HNO₃ gives 2,4,6-trinitrophenol, but the yield is poor because phenol gets oxidised.

  • A better route: first treat phenol with conc. H₂SO₄ to get phenol-2,4-disulphonic acid, then with conc. HNO₃. The –SO₃H groups are replaced by –NO₂ and picric acid forms in good yield.

Sulphonation. Concentrated H₂SO₄ sulphonates phenol. Temperature decides the main product.

TemperatureMajor product
Room temperature (about 288–293 K)o-hydroxybenzenesulphonic acid (faster to form)
373 Kp-hydroxybenzenesulphonic acid (more stable)

Sulphonation is reversible. At the higher temperature, the ortho product converts to the more stable para product.

3.7 Reimer–Tiemann reaction

Phenol is heated with chloroform and aqueous NaOH at about 340 K. Acidification then gives salicylaldehyde (2-hydroxybenzaldehyde). A –CHO group enters at the ortho position.

The steps are:

  1. OH⁻ removes H⁺ from CHCl₃ to give ⁻CCl₃, which loses Cl⁻ to give dichlorocarbene, :CCl₂. This is the electrophile.

  2. Phenol is converted to phenoxide. The electron-rich ortho carbon attacks :CCl₂.

  3. The result is a dichloromethyl group, –CHCl₂, at ortho (a substituted benzal chloride).

  4. Alkali hydrolyses –CHCl₂ to –CHO. Acid then turns the phenoxide back into –OH.

C6H5OH→(ii) H+(i) CHCl3, aq. NaOH, 340 Ko-HOC6H4CHO\mathrm{C_6H_5OH \xrightarrow[(ii)\ H^+]{(i)\ CHCl_3,\ aq.\ NaOH,\ 340\ K} o\text{-}HOC_6H_4CHO}

Some para product also forms, but ortho is the main product. If CCl₄ is used instead of CHCl₃, a –COOH group enters and salicylic acid forms.

3.8 Kolbe reaction

Sodium phenoxide is heated with CO₂ at about 400 K and 4–7 atm. The product, sodium salicylate, gives salicylic acid on acidification.

C6H5O−Na++CO2→400 K, 4–7 atmo-HOC6H4COO−Na+→H+o-HOC6H4COOH\mathrm{C_6H_5O^-Na^+ + CO_2 \xrightarrow{400\ K,\ 4\text{–}7\ atm} o\text{-}HOC_6H_4COO^-Na^+ \xrightarrow{H^+} o\text{-}HOC_6H_4COOH}

CO₂ is a weak electrophile. Phenol is not reactive enough to attack it, but the phenoxide ion is. That is why the sodium salt is used.

Named reactionReagentsElectrophileGroup added (ortho)Final product
Reimer–TiemannCHCl₃, aq. NaOH, 340 K; then H⁺:CCl₂–CHOsalicylaldehyde
KolbeNaOH, then CO₂ at 400 K, 4–7 atm; then H⁺CO₂–COOHsalicylic acid

3.9 Uses of phenols

  • Phenol: making Bakelite and other resins, nylon intermediates, dyes and drugs. Dilute solutions are antiseptic (carbolic acid).

  • Picric acid: explosives and dyes.

  • Salicylic acid: making aspirin and methyl salicylate (oil of wintergreen, used in pain-relief balms).

  • Cresols: disinfectants such as the floor cleaners used in hospitals.

Worked example 3.1: Name the following by IUPAC: (i) a benzene ring with –OH and –CH₃ on adjacent carbons (ii) a benzene ring with two –OH groups at 1 and 3 positions.

Solution: (i) The –OH carbon is C1 and the methyl is at C2: 2-methylphenol (o-cresol). (ii) Two –OH groups at 1,3: benzene-1,3-diol (resorcinol).

Worked example 3.2: A plant makes 940 kg of phenol a day by the cumene process. How much propanone forms with it?

Solution: One mole of cumene hydroperoxide gives one mole of phenol and one mole of propanone. Molar mass of phenol = 94 g/mol, so 940 kg = 10,000 mol. Propanone = 10,000 mol × 58 g/mol = 580 kg.

Worked example 3.3: Arrange in increasing order of acidity: ethanol, p-cresol, phenol, p-nitrophenol.

Solution: Ethanol has no resonance in its anion: weakest. p-Cresol has an electron-releasing –CH₃, so it is a little weaker than phenol. p-Nitrophenol has a strong electron-withdrawing group at para: strongest. Increasing order: ethanol less than p-cresol less than phenol less than p-nitrophenol.

Worked example 3.4: Phenol is nitrated with dilute HNO₃. How are the two products separated, and why does the method work?

Solution: The products are o-nitrophenol and p-nitrophenol. Steam distillation is used. In the ortho isomer, the –OH and –NO₂ groups are close enough to form an intramolecular hydrogen bond. The molecules do not bind to each other, so the ortho isomer is volatile in steam. The para isomer forms intermolecular hydrogen bonds and stays in the flask.

Worked example 3.5: Compare the products of phenol with (i) Br₂ in CS₂ at 273 K and (ii) bromine water.

Solution: (i) In a non-polar solvent, only one Br enters. The products are p-bromophenol (major) and o-bromophenol. (ii) In water, phenol is partly ionised to the highly activated phenoxide and Br₂ is polarised. All three ortho and para positions are brominated, giving a white precipitate of 2,4,6-tribromophenol.

Worked example 3.6: 4.7 g of phenol is treated with excess bromine water. Find the mass of precipitate.

Solution: Moles of phenol = 4.7 ÷ 94 = 0.050. 2,4,6-Tribromophenol is C₆H₃Br₃O. Its molar mass is 72 + 3 + 240 + 16 = 331 g/mol. One mole of phenol gives one mole of product. Mass = 0.050 × 331 = 16.55 g. It uses 0.15 mol Br₂.

Worked example 3.7: In the Reimer–Tiemann reaction, name the electrophile and the main product. What changes if CCl₄ replaces CHCl₃?

Solution: The electrophile is dichlorocarbene, :CCl₂, formed from CHCl₃ and OH⁻. The main product after acidification is salicylaldehyde, 2-hydroxybenzaldehyde. With CCl₄, the carbon that enters carries three Cl atoms. Its hydrolysis gives –COOH, so salicylic acid forms.

Worked example 3.8: Give a three-step route from phenol to aspirin, naming the reaction in each step.

Solution: Step 1: phenol + NaOH gives sodium phenoxide (acid–base). Step 2: sodium phenoxide + CO₂ at 400 K, 4–7 atm, then H⁺, gives salicylic acid (Kolbe reaction). Step 3: salicylic acid + ethanoic anhydride with a trace of acid gives acetylsalicylic acid, aspirin (acetylation).

Worked example 3.9: Arrange in decreasing order of acidity: m-nitrophenol, p-nitrophenol, o-nitrophenol, 2,4,6-trinitrophenol, phenol.

Solution: Picric acid, with three nitro groups at ortho and para, is strongest (pKa about 0.5). p-Nitrophenol (7.1) is next; o-nitrophenol (7.2) is a little weaker due to intramolecular H-bonding. m-Nitrophenol (8.3) gets only the –I effect. Phenol (10.0) is weakest. Order: 2,4,6-trinitrophenol greater than p-nitrophenol greater than o-nitrophenol greater than m-nitrophenol greater than phenol.

Quick revision

  • Phenol's C–O bond is shorter than methanol's because of partial double-bond character.

  • Cumene + O₂, then H⁺, gives phenol and propanone (acetone).

  • Phenol (pKa 10) is more acidic than ethanol (15.9) because phenoxide is resonance-stabilised. It reacts with NaOH but not NaHCO₃.

  • –NO₂ at o/p raises acidity most (–R and –I); at meta only –I. –CH₃ lowers acidity. Picric acid pKa about 0.5.

  • –OH is activating and o/p directing. Bromine water gives white 2,4,6-tribromophenol; Br₂ in CS₂ gives monobromophenols.

  • Dilute HNO₃: o- and p-nitrophenol, separated by steam distillation (ortho is volatile).

  • Sulphonation: ortho at room temperature, para at 373 K.

  • Reimer–Tiemann: CHCl₃ + NaOH, electrophile :CCl₂, gives salicylaldehyde. Kolbe: phenoxide + CO₂ gives salicylic acid.

NEET traps

  • Saying phenol reacts with NaHCO₃. Plain phenol does not; only very strong phenols like picric acid do.

  • Thinking o-nitrophenol is more acidic than p-nitrophenol. Intramolecular H-bonding makes ortho slightly weaker.

  • Adding FeBr₃ for bromination of phenol. It is not needed; the ring is already activated.

  • Writing :CCl₂ as a nucleophile. Dichlorocarbene has only six valence electrons and is an electrophile.

  • Using phenol instead of sodium phenoxide in the Kolbe reaction.

  • Mixing up steam-volatile o-nitrophenol with p-nitrophenol.

Practice MCQs: Chapter 3

Level 1: Concept check

1. Which is the strongest acid? (a) Ethanol (b) Water (c) Phenol (d) Methanol

2. The main product of the Reimer–Tiemann reaction of phenol is: (a) Salicylaldehyde (b) Salicylic acid (c) Benzaldehyde (d) p-Hydroxybenzoic acid

3. Phenol with excess bromine water gives: (a) o-Bromophenol (b) p-Bromophenol (c) m-Bromophenol (d) 2,4,6-Tribromophenol

4. The by-product of making phenol by the cumene process is: (a) Ethanal (b) Propanone (c) Methanol (d) Benzoic acid

5. The Kolbe reaction uses: (a) Sodium phenoxide and CO₂ under pressure (b) Phenol and CO at room temperature (c) Phenol, CHCl₃ and NaOH (d) Phenol and CCl₄ alone

6. Resorcinol is: (a) Benzene-1,2-diol (b) Benzene-1,4-diol (c) Benzene-1,3-diol (d) 3-Methylphenol

7. Phenol gives a violet colour with: (a) Lucas reagent (b) Neutral FeCl₃ (c) Tollens' reagent (d) Bromine water

8. Phenol dissolves in: (a) Aqueous NaHCO₃ but not NaOH (b) Neither NaOH nor NaHCO₃ (c) Both equally (d) Aqueous NaOH but not NaHCO₃

9. Phenol heated with zinc dust gives: (a) Benzene (b) Cyclohexanol (c) Benzoquinone (d) Biphenyl

10. The –OH group in phenol, towards electrophilic substitution, is: (a) Deactivating and meta directing (b) Deactivating and o/p directing (c) Activating and o/p directing (d) Activating and meta directing

Level 2: NEET standard

11. The increasing order of acidity is: (a) Phenol less than ethanol less than p-cresol less than p-nitrophenol (b) Ethanol less than p-cresol less than phenol less than p-nitrophenol (c) p-Cresol less than ethanol less than phenol less than p-nitrophenol (d) Ethanol less than phenol less than p-nitrophenol less than p-cresol

12. o-Nitrophenol and p-nitrophenol are separated by steam distillation because: (a) p-Nitrophenol has intramolecular H-bonding (b) o-Nitrophenol is ionic (c) p-Nitrophenol has a lower molar mass (d) o-Nitrophenol has intramolecular H-bonding and is steam volatile

13. The electrophile in the Reimer–Tiemann reaction is: (a) Dichlorocarbene, :CCl₂ (b) Trichloromethyl anion, ⁻CCl₃ (c) Formyl cation, HCO⁺ (d) Chloronium ion, Cl⁺

14. 4.7 g of phenol reacts with excess bromine water. The mass of precipitate formed is: (a) 33.1 g (b) 8.28 g (c) 16.55 g (d) 12.0 g

15. Phenol is heated with conc. H₂SO₄ at 373 K. The major product is: (a) o-Hydroxybenzenesulphonic acid (b) p-Hydroxybenzenesulphonic acid (c) m-Hydroxybenzenesulphonic acid (d) Benzenesulphonic acid

16. Which is the most acidic? (a) o-Cresol (b) Phenol (c) p-Methoxyphenol (d) m-Nitrophenol

17. The best way to make picric acid from phenol is: (a) Treat with conc. H₂SO₄ first, then with conc. HNO₃ (b) Treat with dilute HNO₃ at 298 K (c) Treat with NaNO₂ and HCl (d) Treat with bromine water, then HNO₃

18. Phenol with Br₂ in CS₂ at 273 K gives mainly: (a) 2,4,6-Tribromophenol (b) p-Bromophenol (c) m-Bromophenol (d) Bromobenzene

19. 940 kg of phenol is made by the cumene process. The mass of propanone formed alongside is: (a) 290 kg (b) 940 kg (c) 580 kg (d) 1160 kg

20. The C–O bond in phenol is shorter than in methanol because: (a) Phenol is ionic (b) Oxygen in phenol is sp³ (c) Phenol forms stronger H-bonds (d) Resonance gives it partial double-bond character and the carbon is sp²

21. Chlorobenzene is converted to phenol by: (a) NaOH at 623 K and 300 atm, then acid (b) Dilute NaOH at room temperature (c) Zinc dust on heating (d) Aqueous KCN

22. Aspirin is made by reacting salicylic acid with: (a) Methanol and H⁺ (b) Ethanoic anhydride (c) CHCl₃ and NaOH (d) CO₂ under pressure

Level 3: Challenge

23. Which compound has the lowest pKa? (a) Phenol (b) p-Nitrophenol (c) m-Nitrophenol (d) 2,4,6-Trinitrophenol

24. Phenoxide is stabilised by resonance much more than phenol because: (a) Phenoxide has fewer resonance structures (b) Phenol cannot show resonance at all (c) Resonance in phenol separates charge, while in phenoxide it only spreads one negative charge (d) Phenoxide has a positive charge on oxygen

25. The correct order of acidity is: (a) p-Nitrophenol greater than o-nitrophenol greater than m-nitrophenol greater than phenol (b) o-Nitrophenol greater than p-nitrophenol greater than phenol greater than m-nitrophenol (c) m-Nitrophenol greater than p-nitrophenol greater than o-nitrophenol greater than phenol (d) Phenol greater than m-nitrophenol greater than o-nitrophenol greater than p-nitrophenol

26. Phenol → (i) NaOH (ii) CO₂, 400 K, 4–7 atm (iii) H⁺ → X. X + (CH₃CO)₂O → Y. Y is: (a) Methyl salicylate (b) Acetylsalicylic acid (c) Phenyl ethanoate (d) Salicylaldehyde

27. The correct order of acidity is: (a) p-Methoxyphenol greater than phenol greater than m-methoxyphenol (b) Phenol greater than p-methoxyphenol greater than m-methoxyphenol (c) p-Methoxyphenol greater than m-methoxyphenol greater than phenol (d) m-Methoxyphenol greater than phenol greater than p-methoxyphenol

28. 0.2 mol of phenol reacts completely with bromine water. The moles of Br₂ used are: (a) 0.2 (b) 0.4 (c) 0.6 (d) 0.3

29. Assertion (A): Phenol is more acidic than ethanol. Reason (R): The phenoxide ion is stabilised by resonance, but the ethoxide ion is not. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: o-Nitrophenol is steam volatile. Statement II: p-Nitrophenol shows intramolecular hydrogen bonding. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1cPhenol pKa about 10; the others are about 15.5–16.
2a–CHO enters ortho: 2-hydroxybenzaldehyde.
3dAll o/p positions are brominated in water.
4bCumene hydroperoxide splits to phenol + propanone.
5aPhenoxide attacks CO₂ at 400 K, 4–7 atm.
6cResorcinol has –OH at 1 and 3.
7bPhenols form a violet complex with Fe³⁺.
8dPhenol (pKa 10) is too weak to react with HCO₃⁻.
9aZn removes oxygen to give benzene.
10c+R effect of –OH enriches o/p positions.
11bNo resonance in ethoxide; –CH₃ weakens; –NO₂ strengthens.
12dOrtho isomer's internal H-bond makes it volatile.
13aCHCl₃ + OH⁻ gives :CCl₂, an electron-poor species.
14c0.05 mol × 331 g/mol = 16.55 g.
15bAt 373 K the more stable para isomer dominates.
16d–NO₂ (–I) increases acidity; the others decrease it.
17aDisulphonation then nitration avoids oxidation of phenol.
18bNon-polar solvent gives monobromination, para major.
19c10,000 mol × 58 g/mol = 580 kg.
20dsp² carbon and partial C=O character shorten the bond.
21aDow-type process needs high temperature and pressure.
22bAcetylation of the phenolic –OH gives aspirin.
23dPicric acid, pKa about 0.5.
24cCharge separation in phenol costs energy.
25aPara (7.1) greater than ortho (7.2) greater than meta (8.3) greater than phenol (10).
26bX = salicylic acid; acetylation gives aspirin.
27dMeta –OCH₃ acts by –I only; para –OCH₃ donates by +R.
28c3 mol Br₂ per mol phenol: 0.6 mol.
29aResonance stabilisation of the anion explains the acidity.
30cp-Nitrophenol has intermolecular, not intramolecular, H-bonds.

Chapter 3 revision sheet

One-page summary

  • Phenol: –OH on an sp² ring carbon. The C–O bond is shorter than in methanol because the O lone pair is shared with the ring.

  • Preparation: chlorobenzene + NaOH at 623 K and 300 atm; benzenesulphonic acid fused with NaOH; warming a benzenediazonium salt with water; cumene process.

  • Cumene (isopropylbenzene) + air → cumene hydroperoxide → dilute acid → phenol + propanone.

  • Phenol (pKa 10.0) is more acidic than water and alcohols but weaker than carbonic acid and carboxylic acids. It dissolves in NaOH, not in NaHCO₃.

  • Phenoxide is resonance-stabilised; alkoxide is not.

  • –NO₂ (electron-withdrawing) at ortho/para raises acidity most; –CH₃ (electron-donating) lowers it. Picric acid (pKa 0.5) is very acidic.

  • –OH is a strong activator and o/p director for electrophilic substitution.

  • Dilute HNO₃ at 298 K → o- and p-nitrophenol. o-Nitrophenol is steam-volatile (intramolecular H-bond). Conc. HNO₃ → picric acid.

  • Br₂ in CS₂ at low temperature → mainly 4-bromophenol. Bromine water → white 2,4,6-tribromophenol.

  • Kolbe: sodium phenoxide + CO₂ (4–7 atm, 400 K), then H⁺ → salicylic acid.

  • Reimer–Tiemann: CHCl₃ + aq. NaOH, then H⁺ → salicylaldehyde; electrophile is dichlorocarbene (:CCl₂).

  • Zn dust → benzene; chromic acid → benzoquinone. Neutral FeCl₃ gives a violet colour.

  • Salicylic acid + acetic anhydride → aspirin (acetylsalicylic acid).

Must-remember table

CompoundpKaNote
Ethanol15.9Weaker acid than water
Phenol10.0Resonance-stabilised phenoxide
4-Methylphenol10.2+I/hyperconjugation of CH₃ lowers acidity
3-Nitrophenol8.3Only –I effect from meta
4-Nitrophenol7.1–I and –R effects
2,4,6-Trinitrophenol0.5Strong enough to fizz with NaHCO₃
ReactionReagentProduct
KolbeNaOH, CO₂ (400 K, 4–7 atm), H⁺Salicylic acid
Reimer–TiemannCHCl₃, aq. NaOH, H⁺Salicylaldehyde
BrominationBromine water2,4,6-Tribromophenol (white)
NitrationConc. HNO₃Picric acid
ReductionZn dust, heatBenzene
OxidationNa₂Cr₂O₇/H₂SO₄Benzoquinone

Memory aids

  • "Kolbe brings CO₂, Reimer brings CHCl₃": CO₂ gives –COOH (salicylic acid); CHCl₃ gives –CHO (salicylaldehyde). Both go ortho.

  • "Phenol Fails the Fizz": phenol does not release CO₂ from NaHCO₃; carboxylic acids do.

  • "Ortho keeps its hug to itself": o-nitrophenol H-bonds within the molecule, so it is volatile in steam; para H-bonds to neighbours and stays behind.

  • "Water makes Three": bromine water puts three Br on phenol; CS₂ in the cold gives one.

  • "Cumene gives a Couple": phenol plus propanone come out together.

Concept connections

  • Resonance and inductive effects that decide phenol acidity are from Chemistry Book 14: Some Basic Principles of Organic Chemistry.

  • Electrophilic substitution of the ring follows the rules in Chemistry Book 15: Hydrocarbons.

  • Diazonium salts used to make phenol are covered in Chemistry Book 18: Organic Compounds Containing Nitrogen; pKa ideas link to Chemistry Book 6: Equilibrium.

Practice MCQs: Chapter 3, Level 4 (new NEET pattern)

31. Match List I (reaction of phenol) with List II (main product).

List I:

  • A. Bromine water

  • B. CHCl₃ + aq. NaOH, then H⁺

  • C. NaOH, then CO₂ at 400 K and 4–7 atm, then H⁺

  • D. Zn dust, heat

List II:

  • (i) Benzene

  • (ii) Salicylic acid

  • (iii) 2,4,6-Tribromophenol

  • (iv) Salicylaldehyde

(a) A-iii, B-ii, C-iv, D-i  (b) A-iv, B-iii, C-ii, D-i  (c) A-iii, B-iv, C-i, D-ii  (d) A-iii, B-iv, C-ii, D-i

32. Match List I (method of making phenol) with List II (its feature).

List I:

  • A. Cumene hydroperoxide + dilute acid

  • B. Chlorobenzene + NaOH

  • C. Benzenediazonium chloride + warm water

  • D. Benzenesulphonic acid + molten NaOH

List II:

  • (i) Propanone is a co-product

  • (ii) Needs 623 K and about 300 atm

  • (iii) Nitrogen gas is given off

  • (iv) The –SO₃H group is replaced in a fusion step

(a) A-i, B-ii, C-iii, D-iv  (b) A-ii, B-i, C-iii, D-iv  (c) A-i, B-iii, C-ii, D-iv  (d) A-i, B-ii, C-iv, D-iii

33. Match List I (compound) with List II (pKa).

List I:

  • A. Ethanol

  • B. Phenol

  • C. 4-Nitrophenol

  • D. 2,4,6-Trinitrophenol

List II:

  • (i) 0.5

  • (ii) 7.1

  • (iii) 10.0

  • (iv) 15.9

(a) A-iii, B-iv, C-ii, D-i  (b) A-iv, B-ii, C-iii, D-i  (c) A-iv, B-iii, C-ii, D-i  (d) A-i, B-iii, C-ii, D-iv

34. Match List I (reagent added to phenol) with List II (observation).

List I:

  • A. Neutral FeCl₃

  • B. Bromine water

  • C. NaHCO₃ solution

  • D. NaOH solution

List II:

  • (i) Phenol dissolves to give a clear solution

  • (ii) White precipitate

  • (iii) No effervescence

  • (iv) Violet colour

(a) A-ii, B-iv, C-iii, D-i  (b) A-iv, B-ii, C-iii, D-i  (c) A-iv, B-ii, C-i, D-iii  (d) A-iv, B-iii, C-ii, D-i

35. How many of the following statements are correct?

  • A. Phenol is a stronger acid than ethanol.

  • B. Phenol reacts with NaHCO₃ to release CO₂.

  • C. o-Nitrophenol is steam-volatile because of intramolecular H-bonding.

  • D. A –CH₃ group at the para position makes phenol more acidic.

  • E. The C–O bond in phenol is shorter than in methanol.

  • F. The –OH group directs incoming electrophiles to ortho and para positions.

(a) Two  (b) Three  (c) Four  (d) Five

36. Choose the correct set of statements about the Reimer–Tiemann reaction.

  • A. The electrophile is dichlorocarbene, :CCl₂.

  • B. After acidification the main product is salicylaldehyde.

  • C. The reaction uses CO₂ under pressure.

  • D. The para-hydroxy aldehyde is the major product.

(a) A only  (b) A and B only  (c) A, B and D only  (d) B and C only

37. Choose the correct statements about the cumene process.

  • A. Cumene is isopropylbenzene.

  • B. Cumene is oxidised by air to cumene hydroperoxide.

  • C. Treating the hydroperoxide with dilute acid gives phenol and propanone.

  • D. The co-product is ethanal.

(a) A, B and C only  (b) A and C only  (c) B, C and D only  (d) A, B, C and D

38. How many of these are stronger acids than phenol?

  • 4-Nitrophenol

  • 4-Methylphenol

  • Ethanol

  • 2,4,6-Trinitrophenol

  • 4-Methoxyphenol

  • Ethanoic acid

  • 3-Nitrophenol

(a) Two  (b) Three  (c) Five  (d) Four

39. Phenol is nitrated with dilute HNO₃ at 298 K. The two products P and Q behave as below.

ProductOn steam distillationType of H-bonding
PDistils over with steamIntramolecular
QStays in the flaskIntermolecular

Which identification is correct?

(a) P 4-nitrophenol, Q 2-nitrophenol  (b) P 2-nitrophenol, Q 4-nitrophenol  (c) P 3-nitrophenol, Q 4-nitrophenol  (d) P picric acid, Q 2-nitrophenol

40. A bar chart shows pKa values: phenol 10.0, 4-methylphenol 10.2, 3-nitrophenol 8.3, 4-nitrophenol 7.1. Which conclusion is correct?

(a) –NO₂ at para lowers pKa more than at meta, because only from para can it withdraw electrons by resonance  (b) The methyl group increases acidity  (c) Meta-nitro has a larger effect than para-nitro  (d) Every substituent raises the pKa

41. 9.4 g of phenol (M = 94 g/mol) is shaken with excess bromine water. The mass of 2,4,6-tribromophenol (M = 331 g/mol) formed is:

(a) 17.3 g  (b) 25.1 g  (c) 9.4 g  (d) 33.1 g

Passage for Q42–43: An aromatic compound A (C₇H₈O) does not dissolve in NaHCO₃ solution but dissolves in NaOH. It gives a violet colour with neutral FeCl₃. With bromine water it gives a white precipitate of formula C₇H₅Br₃O.

42. A is:

(a) Benzyl alcohol  (b) 4-Methylphenol  (c) Methoxybenzene  (d) 3-Methylphenol

43. Why does A dissolve in NaOH but not in NaHCO₃?

(a) A is a stronger acid than carbonic acid  (b) A is a base  (c) A is a weaker acid than carbonic acid but stronger than water  (d) NaHCO₃ does not dissolve in water

44. Arrange in decreasing order of acid strength: (I) phenol (II) 4-nitrophenol (III) 4-methylphenol (IV) ethanol (V) 2,4,6-trinitrophenol.

(a) V > II > I > III > IV  (b) II > V > I > III > IV  (c) V > II > III > I > IV  (d) V > I > II > III > IV

45. Phenol → (i) NaOH (ii) CO₂, 400 K (iii) H⁺ → X. X is heated with acetic anhydride to give Y. Y is:

(a) Methyl salicylate  (b) Acetylsalicylic acid  (c) Phenyl ethanoate  (d) Salicylaldehyde

Level 4 answer key

QAnsReason
31dBromine water → tribromophenol; Reimer–Tiemann → salicylaldehyde; Kolbe → salicylic acid; Zn dust → benzene
32aCumene gives propanone too; Dow process needs high T and P; diazonium loses N₂; sulphonate is fused with NaOH
33cAcidity rises: ethanol < phenol < 4-nitrophenol < picric acid, so pKa falls 15.9 → 10.0 → 7.1 → 0.5
34bFeCl₃ violet; tribromophenol white; too weak to fizz with NaHCO₃; forms soluble sodium phenoxide with NaOH
35cA, C, E, F true; B false (phenol weaker than carbonic acid); D false (CH₃ lowers acidity)
36b:CCl₂ attacks the ring; ortho product (salicylaldehyde) is major; CO₂ belongs to Kolbe
37aThe co-product is propanone, not ethanal
38d4-Nitrophenol, picric acid, ethanoic acid and 3-nitrophenol are stronger; 4-methyl- and 4-methoxyphenol and ethanol are weaker
39bIntramolecular H-bond in 2-nitrophenol makes it volatile; 4-nitrophenol H-bonds between molecules
40aPara-NO₂ adds resonance withdrawal to the inductive effect, so 7.1 is lower than 8.3
41d9.4/94 = 0.1 mol; 1 : 1 ratio; 0.1 × 331 = 33.1 g
42dPhenolic (FeCl₃, NaOH) and three free o/p positions to OH; only 3-methylphenol leaves 2, 4 and 6 all free
43cPhenols (pKa about 10) are weaker than carbonic acid but stronger than water
44aPicric acid > 4-nitrophenol > phenol > 4-methylphenol > ethanol
45bX is salicylic acid (Kolbe); acetylation of its –OH gives aspirin
25 min left
‹
›