Chapter 6: Nucleophilic Addition and Related Reactions
What you will learn
The two-step mechanism of nucleophilic addition to >C=O.
Why aldehydes are more reactive than ketones, and aliphatic more than aromatic aldehydes.
Addition of HCN, NaHSO₃, alcohols and Grignard reagents.
Addition–elimination with ammonia and its derivatives: oximes, hydrazones, semicarbazones and 2,4-DNP derivatives.
Reduction to alcohols (NaBH₄, LiAlH₄) and to hydrocarbons (Clemmensen, Wolff–Kishner).
6.1 Mechanism of nucleophilic addition
The carbonyl carbon is partly positive and lies in a flat, open arrangement. A nucleophile can approach it from above or below the plane.
Attack. The nucleophile (Nu⁻) attacks the carbonyl carbon roughly at right angles to the plane. The π electrons move onto oxygen. The carbon changes from sp² (trigonal planar) to sp³ (tetrahedral). A tetrahedral alkoxide intermediate forms. This step is usually slow.
Protonation. The alkoxide oxygen takes up H⁺ from the solvent or added acid. The neutral addition product forms.

The slow first step changes the carbon from flat sp² to crowded sp³, which is why size and electron supply of the groups on carbon decide the rate.
Acid helps in another way too. If H⁺ first binds to the carbonyl oxygen, the carbon becomes even more positive. A weak nucleophile can then attack. This is why many additions use a trace of acid.
6.2 Relative reactivity of aldehydes and ketones
Aldehydes react faster than ketones in nucleophilic addition. Two effects add up.
| Effect | Aldehyde, RCHO | Ketone, RCOR′ |
|---|---|---|
| Steric | one small H lets the nucleophile in easily; the crowded tetrahedral product is less strained | two alkyl groups block the approach and crowd the product |
| Electronic | one alkyl group reduces the positive charge on C a little (+I) | two alkyl groups reduce it more, so C is a weaker electrophile |
So the usual order is:
Aromatic aldehydes. Benzaldehyde is less reactive than propanal. The benzene ring donates electron density to the carbonyl group by resonance, which reduces the positive charge on its carbon.
Substituents on the ring. Electron-withdrawing groups make the carbonyl carbon more positive and raise reactivity. Electron-releasing groups lower it. For para-substituted benzaldehydes:
6.3 Addition of HCN: cyanohydrins
Aldehydes and ketones add hydrogen cyanide to give cyanohydrins. HCN is a weak acid and gives few CN⁻ ions. A little base is added to make CN⁻, the real nucleophile. The reaction is then fast.
CN⁻ attacks the carbonyl carbon. The alkoxide then takes H⁺ from HCN, which regenerates CN⁻. Cyanohydrins are useful because the –CN group can be hydrolysed to –COOH. That gives α-hydroxy acids, such as 2-hydroxy-2-methylpropanoic acid from propanone.
6.4 Addition of sodium hydrogensulphite
Aldehydes and most methyl ketones add NaHSO₃ to form crystalline addition products. The sulphur atom is the nucleophile.
The equilibrium lies well to the right for most aldehydes. For most ketones, the bulky groups push it to the left, so only small methyl ketones react well. The adducts dissolve in water but crystallise from the reaction. Dilute acid or alkali gives back the carbonyl compound. Chemists use this to separate and purify aldehydes from mixtures.
6.5 Addition of Grignard reagents and alcohols
Grignard reagents. RMgX adds R⁻ to the carbonyl carbon. Hydrolysis of the adduct gives an alcohol (Chapter 1): HCHO gives 1°, other aldehydes 2°, and ketones 3° alcohols.
Alcohols. In the presence of dry HCl, an aldehyde adds one molecule of alcohol to give a hemiacetal. A second alcohol molecule then replaces –OH to give an acetal, RCH(OR′)₂. Ketones react with ethane-1,2-diol to give cyclic ketals. Dilute aqueous acid hydrolyses acetals and ketals back to the carbonyl compound. So they are used to protect a C=O group during other reactions.
6.6 Ammonia and its derivatives: addition–elimination
Compounds of the type Z–NH₂ add to C=O, and then lose water. The net result is a C=N bond.
The reaction works best in weakly acidic solution, about pH 3.5 to 4.5. A little acid protonates the carbonyl oxygen and speeds up attack. Too much acid protonates the nitrogen of Z–NH₂, and then it is no longer a nucleophile.
| Reagent, H₂N–Z | Name of reagent | Product type | Product from >C=O |
|---|---|---|---|
| H₂N–OH | hydroxylamine | oxime | >C=N–OH |
| H₂N–NH₂ | hydrazine | hydrazone | >C=N–NH₂ |
| H₂N–NHC₆H₅ | phenylhydrazine | phenylhydrazone | >C=N–NHC₆H₅ |
| H₂N–NHC₆H₃(NO₂)₂ | 2,4-dinitrophenylhydrazine (2,4-DNP) | 2,4-DNP derivative | >C=N–NHC₆H₃(NO₂)₂, yellow–orange solid |
| H₂N–NHCONH₂ | semicarbazide | semicarbazone | >C=N–NHCONH₂ |
| H₂N–R | primary amine | substituted imine (Schiff's base) | >C=N–R |
These derivatives are crystalline solids with sharp melting points. They were used to identify unknown carbonyl compounds. 2,4-DNP gives a yellow, orange or red precipitate with any aldehyde or ketone, so it is a general test for the C=O group.
In semicarbazide, H₂N–NH–CO–NH₂, only the NH₂ on the far side from C=O reacts. The lone pair of the other NH₂ is delocalised into its neighbouring C=O (amide resonance). So it is a poor nucleophile.
Methanal and ammonia give a cage compound, hexamethylenetetramine (urotropine), (CH₂)₆N₄. It is used as a urinary antiseptic.
6.7 Reduction to alcohols
| Reagent | Aldehyde gives | Ketone gives | Notes |
|---|---|---|---|
| NaBH₄ | 1° alcohol | 2° alcohol | mild; does not reduce C=C, esters or acids |
| LiAlH₄, then H₂O | 1° alcohol | 2° alcohol | strong; also reduces acids and esters; leaves isolated C=C |
| H₂ with Ni, Pt or Pd | 1° alcohol | 2° alcohol | also reduces C=C |
Both hydride reagents deliver H⁻ to the carbonyl carbon. This is nucleophilic addition with hydride as the nucleophile. For example, CH₂=CHCHO with NaBH₄ gives CH₂=CHCH₂OH, but with H₂/Ni it gives CH₃CH₂CH₂OH.
6.8 Reduction to hydrocarbons: Clemmensen and Wolff–Kishner
Both reactions change >C=O into >CH₂. They differ in the medium.
Clemmensen reduction. Heat the carbonyl compound with zinc amalgam (Zn–Hg) and concentrated HCl.
Wolff–Kishner reduction. First form the hydrazone with NH₂NH₂. Then heat it with KOH (or sodium ethoxide) in a high-boiling solvent such as ethane-1,2-diol. Nitrogen gas is lost.
| Feature | Clemmensen | Wolff–Kishner |
|---|---|---|
| Reagents | Zn–Hg, conc. HCl | NH₂NH₂, then KOH in ethylene glycol, heat |
| Medium | strongly acidic | strongly basic |
| By-product | water | N₂ gas |
| Use it when the molecule has | groups that are damaged by base | groups that are damaged by acid |
Example: acetophenone, C₆H₅COCH₃, gives ethylbenzene, C₆H₅CH₂CH₃, by either method.
Worked example 6.1: Arrange in decreasing order of reactivity towards HCN: propanone, methanal, ethanal, di-tert-butyl ketone.
Solution: Methanal has no alkyl group: most reactive. Ethanal has one methyl. Propanone has two methyls, so it is less electrophilic and more crowded. Di-tert-butyl ketone has two very bulky groups and is least reactive. Order: methanal greater than ethanal greater than propanone greater than di-tert-butyl ketone.
Worked example 6.2: Propanone is treated with HCN and a trace of NaOH. The product is hydrolysed with dilute acid. Give both products.
Solution: CN⁻ adds to the carbonyl carbon, giving propanone cyanohydrin, (CH₃)₂C(OH)CN (2-hydroxy-2-methylpropanenitrile). Acid hydrolysis converts –CN to –COOH. The final product is 2-hydroxy-2-methylpropanoic acid, (CH₃)₂C(OH)COOH.
Worked example 6.3: Why is the reaction of a ketone with hydroxylamine carried out at about pH 4 and not at pH 1 or pH 10?
Solution: At pH 4, enough acid is present to protonate some carbonyl oxygens, which speeds up attack. Most NH₂OH is still unprotonated and can act as a nucleophile. At pH 1, almost all NH₂OH becomes NH₃OH⁺, which has no free lone pair. At pH 10, there is no acid to activate the carbonyl or to help remove water.
Worked example 6.4: Semicarbazide, H₂N–NH–CO–NH₂, has two NH₂ groups. Which one attacks the carbonyl compound, and why?
Solution: The NH₂ joined to NH (the hydrazine end) attacks. The other NH₂ is joined directly to C=O. Its lone pair is delocalised into that C=O by resonance, as in an amide. So it is much less nucleophilic.
Worked example 6.5: Arrange in increasing order of reactivity towards nucleophilic addition: p-methoxybenzaldehyde, benzaldehyde, p-nitrobenzaldehyde, p-methylbenzaldehyde.
Solution: –OCH₃ releases electrons strongly by resonance; –CH₃ releases them weakly. –NO₂ withdraws them. Increasing order: p-methoxybenzaldehyde less than p-methylbenzaldehyde less than benzaldehyde less than p-nitrobenzaldehyde.
Worked example 6.6: 0.58 g of propanone reacts completely with 2,4-dinitrophenylhydrazine. Find the mass of the derivative.
Solution: Moles of propanone = 0.58 ÷ 58 = 0.010. 2,4-DNP is C₆H₆N₄O₄ (198 g/mol). Product = propanone + 2,4-DNP − H₂O, so molar mass = 58 + 198 − 18 = 238 g/mol (C₉H₁₀N₄O₄). Mass = 0.010 × 238 = 2.38 g.
Worked example 6.7: Which reagent will convert CH₃COCH₂COOC₂H₅ into CH₃CH(OH)CH₂COOC₂H₅?
Solution: The ketone must be reduced while the ester is left alone. NaBH₄ does exactly this. LiAlH₄ would also reduce the ester to a CH₂OH group.
Worked example 6.8: A compound contains a keto group and a 3° alcohol group, which dehydrates easily in strong acid. The keto group must be changed to CH₂. Choose the method.
Solution: Clemmensen uses concentrated HCl, which would dehydrate the 3° alcohol. Wolff–Kishner works in strongly basic conditions, where the alcohol survives. So choose Wolff–Kishner.
Worked example 6.9: Ethanal reacts with C₂H₅MgBr in dry ether, and the product is hydrolysed. The alcohol formed is then oxidised with K₂Cr₂O₇/H⁺. Give both products.
Solution: Ethyl adds to the carbonyl carbon of ethanal. Hydrolysis gives CH₃CH(OH)CH₂CH₃, butan-2-ol, a 2° alcohol. Oxidation of a 2° alcohol gives a ketone: butanone, CH₃COCH₂CH₃.
Quick revision
Nucleophilic addition: Nu⁻ attacks C (sp² to sp³), tetrahedral alkoxide forms, then it is protonated.
Aldehydes greater than ketones in reactivity: less steric hindrance and less +I effect. Aliphatic aldehydes greater than aromatic.
–NO₂ on the ring raises reactivity of benzaldehyde; –CH₃ and –OCH₃ lower it.
HCN needs a trace of base to make CN⁻. Cyanohydrins hydrolyse to α-hydroxy acids.
NaHSO₃ adducts are crystalline; used to purify aldehydes and small methyl ketones.
Z–NH₂ + C=O gives C=N–Z + H₂O at pH 3.5–4.5: oxime, hydrazone, phenylhydrazone, 2,4-DNP derivative, semicarbazone.
NaBH₄ reduces only C=O of aldehydes and ketones; LiAlH₄ also reduces acids and esters.
Clemmensen: Zn–Hg/conc. HCl. Wolff–Kishner: NH₂NH₂ then KOH/ethylene glycol. Both give >CH₂.
NEET traps
Saying ketones are less reactive only because of steric effect. Both steric and electronic (+I) effects count.
Claiming benzaldehyde is more reactive than ethanal. Ring resonance makes it less reactive.
Running ammonia-derivative reactions in strong acid. The nucleophile gets protonated.
Choosing the wrong NH₂ of semicarbazide.
Using Clemmensen on an acid-sensitive molecule, or Wolff–Kishner on a base-sensitive one.
Expecting NaBH₄ to reduce a C=C bond or an ester.
Practice MCQs: Chapter 6
Level 1: Concept check
1. In nucleophilic addition to a carbonyl group, the first step is: (a) Attack of the nucleophile on the carbonyl carbon (b) Loss of water (c) Attack of an electrophile on carbon (d) Formation of a carbocation
2. During nucleophilic addition, the carbonyl carbon changes its hybridisation from: (a) sp³ to sp² (b) sp to sp² (c) sp² to sp³ (d) sp² to sp
3. Propanone reacts with HCN to give: (a) Propanal (b) Propanone cyanohydrin (c) Propanenitrile (d) Propan-2-amine
4. The reagent for Clemmensen reduction is: (a) NH₂NH₂ and KOH (b) LiAlH₄ (c) NaBH₄ in ethanol (d) Zn–Hg and conc. HCl
5. In Wolff–Kishner reduction, the hydrazone is heated with: (a) KOH in ethylene glycol (b) Conc. HCl (c) H₂ and Ni (d) SnCl₂ and HCl
6. 2,4-Dinitrophenylhydrazine gives a yellow–orange precipitate with: (a) Alcohols (b) Ethers (c) Aldehydes and ketones (d) Alkanes
7. An aldehyde reacts with hydroxylamine to give: (a) A hydrazone (b) An oxime (c) A semicarbazone (d) An amine
8. Which is most reactive towards nucleophilic addition? (a) Propanone (b) Butanone (c) Ethanal (d) Methanal
9. NaBH₄ reduces a ketone to: (a) A secondary alcohol (b) A primary alcohol (c) An alkane (d) A carboxylic acid
10. A ketone reacts with semicarbazide to give: (a) An oxime (b) A phenylhydrazone (c) A semicarbazone (d) A Schiff's base
Level 2: NEET standard
11. The correct decreasing order of reactivity towards nucleophilic addition is: (a) CH₃COCH₃ greater than CH₃CHO greater than HCHO (b) HCHO greater than CH₃CHO greater than CH₃COCH₃ (c) CH₃CHO greater than HCHO greater than CH₃COCH₃ (d) All three are equal
12. Ketones are less reactive than aldehydes towards nucleophiles because: (a) Ketones have a lower dipole moment only (b) Ketones cannot form a tetrahedral intermediate (c) Ketone oxygen is less electronegative (d) Two alkyl groups both crowd the carbonyl carbon and reduce its positive charge
13. Benzaldehyde is less reactive than propanal in nucleophilic addition because: (a) The ring donates electron density to C=O by resonance (b) The ring withdraws electrons by resonance (c) Benzaldehyde has no carbonyl group (d) Propanal has more steric hindrance
14. The decreasing order of reactivity towards nucleophilic addition is: (a) p-CH₃OC₆H₄CHO greater than C₆H₅CHO greater than p-NO₂C₆H₄CHO (b) C₆H₅CHO greater than p-NO₂C₆H₄CHO greater than p-CH₃C₆H₄CHO (c) p-NO₂C₆H₄CHO greater than C₆H₅CHO greater than p-CH₃C₆H₄CHO (d) p-CH₃C₆H₄CHO greater than C₆H₅CHO greater than p-NO₂C₆H₄CHO
15. Carbonyl compounds react with ammonia derivatives fastest at: (a) pH 1 (b) pH 3.5–4.5 (c) pH 7 exactly (d) pH 12
16. In semicarbazide only one NH₂ group reacts with C=O because: (a) The other NH₂ is too far away (b) The other NH₂ is protonated permanently (c) Both react equally (d) The lone pair of the other NH₂ is delocalised with the adjacent C=O
17. Propanone with ethane-1,2-diol and dry HCl gives: (a) A cyclic ketal (b) A hemiacetal only (c) An ester (d) Propan-2-ol
18. 0.58 g of propanone reacts completely with 2,4-DNP. The mass of the derivative is: (a) 1.98 g (b) 2.56 g (c) 2.38 g (d) 2.20 g
19. The sodium hydrogensulphite reaction is used to: (a) Reduce ketones to alkanes (b) Oxidise aldehydes (c) Prepare acetals (d) Separate and purify aldehydes
20. Addition of HCN to carbonyl compounds is speeded up by a trace of base because: (a) Base protonates the carbonyl oxygen (b) Base converts HCN into CN⁻, the real nucleophile (c) Base removes water (d) Base reduces HCN
21. Acetophenone heated with Zn–Hg and conc. HCl gives: (a) Ethylbenzene (b) 1-Phenylethanol (c) Styrene (d) Benzoic acid
22. Ethanal reacts with CH₃MgBr, and the product is hydrolysed. The alcohol formed is: (a) Ethanol (b) Propan-1-ol (c) Propan-2-ol (d) 2-Methylpropan-2-ol
Level 3: Challenge
23. Propanone → (HCN, OH⁻) → X → (H₃O⁺, heat) → Y. Y is: (a) Propanoic acid (b) 2-Hydroxypropanoic acid (c) 2-Methylpropanoic acid (d) 2-Hydroxy-2-methylpropanoic acid
24. A ketone also carries a group that is destroyed by strong acid. To change its C=O to CH₂, the best method is: (a) Clemmensen reduction (b) Wolff–Kishner reduction (c) NaBH₄ reduction (d) Catalytic hydrogenation with Pd–BaSO₄
25. CH₃COCH₂COOC₂H₅ is treated with NaBH₄ in ethanol. The product is: (a) CH₃CH(OH)CH₂COOC₂H₅ (b) CH₃CH(OH)CH₂CH₂OH (c) CH₃COCH₂CH₂OH (d) CH₃CH₂CH₂COOC₂H₅
26. Which oxime can exist as two geometrical isomers? (a) Propanone oxime (b) Methanal oxime (c) Ethanal oxime (d) Benzophenone oxime
27. Methanal reacts with ammonia to give: (a) Methanamine (b) Formamide (c) Methanol (d) Hexamethylenetetramine
28. Compound X (C₃H₆O) forms a crystalline bisulphite adduct. With NaBH₄, X gives a 2° alcohol. X is: (a) Propanal (b) Propanone (c) Prop-2-en-1-ol (d) Methoxyethene
29. Assertion (A): Propanone is less reactive than ethanal towards HCN. Reason (R): The two methyl groups of propanone reduce the positive charge on the carbonyl carbon and crowd it. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: Clemmensen reduction uses zinc amalgam and concentrated HCl. Statement II: Wolff–Kishner reduction is carried out in a strongly acidic medium. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | a | Nu⁻ attacks the δ+ carbon first. |
| 2 | c | Planar C becomes tetrahedral. |
| 3 | b | (CH₃)₂C(OH)CN forms. |
| 4 | d | Zinc amalgam in conc. HCl. |
| 5 | a | Strong base in a high-boiling solvent. |
| 6 | c | General test for C=O. |
| 7 | b | RCH=N–OH is an oxime. |
| 8 | d | No alkyl groups: least hindered, most δ+. |
| 9 | a | R₂C=O gives R₂CHOH. |
| 10 | c | >C=N–NHCONH₂. |
| 11 | b | Fewer alkyl groups, higher reactivity. |
| 12 | d | Steric and +I effects together. |
| 13 | a | Ring resonance lowers δ+ on carbon. |
| 14 | c | –NO₂ withdraws, –CH₃ donates. |
| 15 | b | Enough acid to activate C=O, nucleophile still free. |
| 16 | d | Amide-type resonance ties up that lone pair. |
| 17 | a | Diol forms a five-membered cyclic ketal. |
| 18 | c | 0.010 mol × 238 g/mol = 2.38 g. |
| 19 | d | Crystalline adducts, reversed by acid or alkali. |
| 20 | b | HCN is weak; base supplies CN⁻. |
| 21 | a | C=O becomes CH₂. |
| 22 | c | CH₃ adds to CH₃CHO: CH₃CH(OH)CH₃. |
| 23 | d | Cyanohydrin hydrolysis gives (CH₃)₂C(OH)COOH. |
| 24 | b | Basic conditions protect the acid-sensitive group. |
| 25 | a | NaBH₄ reduces the ketone but not the ester. |
| 26 | c | Different groups (CH₃, H) on the C=N carbon. |
| 27 | d | Six HCHO + four NH₃ give (CH₂)₆N₄. |
| 28 | b | Methyl ketone; reduction gives propan-2-ol. |
| 29 | a | R gives both reasons for lower reactivity. |
| 30 | c | Wolff–Kishner is done in strong base. |
Chapter 6 revision sheet
One-page summary
Mechanism: the nucleophile attacks the sp² carbonyl carbon → tetrahedral alkoxide → protonation gives the product.
Reactivity: HCHO > other aldehydes > ketones. Alkyl groups crowd the carbon and reduce its positive charge.
Aromatic aldehydes (benzaldehyde) are less reactive than aliphatic ones: the ring's resonance reduces the δ+ on carbon.
HCN (a little base helps, to make CN⁻) → cyanohydrins, R₂C(OH)CN.
NaHSO₃ → crystalline bisulphite adduct; used to separate and purify aldehydes and many methyl ketones; dilute acid or alkali gives back the carbonyl.
Alcohols with dry HCl: aldehydes → hemiacetal → acetal. Ketones + ethylene glycol → cyclic ketal (protects C=O).
Ammonia derivatives (Z–NH₂) give C=N–Z: oxime, hydrazone, phenylhydrazone, 2,4-DNP derivative, semicarbazone. Best near pH 3.5.
In semicarbazide (H₂N–NH–CO–NH₂), only the NH₂ not next to C=O is nucleophilic.
Grignard reagents add R⁻ to give alcohols after hydrolysis.
NaBH₄, LiAlH₄ or H₂/catalyst: aldehyde → 1° alcohol, ketone → 2° alcohol.
Clemmensen (Zn–Hg, conc. HCl) and Wolff–Kishner (NH₂NH₂, then KOH in ethylene glycol, heat) turn C=O into CH₂.
Aldehydes are oxidised easily (even by mild oxidants); ketones need strong oxidants and C–C bonds break.
Must-remember table
| Reagent (Z–NH₂ or other) | Product with R₂C=O |
|---|---|
| NH₂OH (hydroxylamine) | Oxime, R₂C=NOH |
| NH₂NH₂ (hydrazine) | Hydrazone, R₂C=NNH₂ |
| C₆H₅NHNH₂ | Phenylhydrazone |
| 2,4-Dinitrophenylhydrazine | 2,4-DNP derivative (orange/yellow solid) |
| NH₂NHCONH₂ (semicarbazide) | Semicarbazone |
| HCN / CN⁻ | Cyanohydrin |
| NaHSO₃ | Bisulphite adduct (crystals) |
| Zn–Hg, conc. HCl | R₂CH₂ (Clemmensen) |
| NH₂NH₂; KOH/ethylene glycol, heat | R₂CH₂ (Wolff–Kishner) |
Memory aids
"Clemmensen = Concentrated aCid; Kishner = KOH": the two CH₂-making reductions, one acidic, one basic.
"-ine becomes -one": hydrazINE → hydrazONE, semicarbazIDE → semicarbazONE, phenylhydrazINE → phenylhydrazONE.
"OH-amine gives OX-ime": hydroxylamine gives an oxime.
"H beats R": fewer and smaller groups on C=O mean faster nucleophilic addition: HCHO first, ketones last.
"pH 3.5, the Goldilocks pH": enough acid to activate C=O, not so much that Z–NH₂ gets protonated.
Concept connections
Nucleophiles, electrophiles and steric effects come from Chemistry Book 14: Some Basic Principles of Organic Chemistry.
Amines and hydrazine derivatives connect to Chemistry Book 18: Organic Compounds Containing Nitrogen.
Glucose forms an oxime, a cyanohydrin and a cyclic hemiacetal: see Chemistry Book 19: Biomolecules.
Practice MCQs: Chapter 6, Level 4 (new NEET pattern)
31. Match List I (reagent with propanone) with List II (product).
List I:
A. NH₂OH
B. NH₂NH₂
C. C₆H₅NHNH₂
D. NH₂NHCONH₂
List II:
(i) (CH₃)₂C=NNHC₆H₅
(ii) (CH₃)₂C=NOH
(iii) (CH₃)₂C=NNHCONH₂
(iv) (CH₃)₂C=NNH₂
(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-iv, C-i, D-iii (c) A-ii, B-iv, C-iii, D-i (d) A-ii, B-i, C-iv, D-iii
32. Match List I (method) with List II (reagents).
List I:
A. Clemmensen reduction
B. Wolff–Kishner reduction
C. Hydride reduction to an alcohol
D. Catalytic hydrogenation
List II:
(i) H₂ over Ni
(ii) NaBH₄
(iii) NH₂NH₂, then KOH in ethylene glycol, heat
(iv) Zn–Hg with conc. HCl
(a) A-iii, B-iv, C-ii, D-i (b) A-iv, B-iii, C-i, D-ii (c) A-iv, B-ii, C-iii, D-i (d) A-iv, B-iii, C-ii, D-i
33. Match List I (reaction) with List II (product).
List I:
A. Ethanal + HCN (trace base)
B. Propanone + saturated NaHSO₃
C. Ethanal + excess CH₃OH, dry HCl
D. Propanone + CH₃MgBr, then H₃O⁺
List II:
(i) 2-Hydroxypropanenitrile
(ii) Crystalline addition product
(iii) An acetal
(iv) A tertiary alcohol
(a) A-i, B-ii, C-iii, D-iv (b) A-ii, B-i, C-iii, D-iv (c) A-i, B-iii, C-ii, D-iv (d) A-i, B-ii, C-iv, D-iii
34. Match List I (process) with List II (feature).
List I:
A. Addition of HCN
B. Acetal formation
C. Addition of ammonia derivatives
D. Ketal formation with ethylene glycol
List II:
(i) Protects the C=O group during other reactions
(ii) CN⁻ attacks the carbonyl carbon
(iii) Fastest at a pH of about 3.5
(iv) Catalysed by dry HCl gas
(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iv, C-i, D-iii (c) A-ii, B-iv, C-iii, D-i (d) A-ii, B-iii, C-iv, D-i
35. How many of the following statements are correct?
A. HCHO is more reactive than CH₃CHO towards nucleophilic addition.
B. Benzaldehyde is more reactive than ethanal towards nucleophilic addition.
C. Propanone is less reactive than propanal.
D. A small amount of base speeds up the addition of HCN.
E. The carbon in the addition product is tetrahedral.
(a) Two (b) Three (c) Four (d) Five
36. Choose the correct set of statements.
A. Clemmensen and Wolff–Kishner reductions both convert C=O to CH₂.
B. NaBH₄ reduces propanone to propan-1-ol.
C. Ketones resist oxidation; strong oxidants break C–C bonds.
D. LiAlH₄ reduces an isolated C=C double bond.
(a) A and C only (b) A, B and C only (c) C and D only (d) A, C and D only
37. Choose the correct statements about semicarbazide, H₂N–NH–CO–NH₂.
A. Only the –NH₂ attached to NH (not to C=O) acts as the nucleophile.
B. The other –NH₂ is deactivated by resonance with the C=O group.
C. Its product with a ketone is a semicarbazone.
D. Both –NH₂ groups react equally.
(a) A only (b) A and D only (c) B and C only (d) A, B and C only
38. How many of these give a secondary alcohol on reduction with NaBH₄?
Propanone
Butanal
Cyclohexanone
Benzaldehyde
Acetophenone
Methanal
(a) Two (b) Three (c) Four (d) One
39. The table lists four carbonyl compounds and the groups on their carbonyl carbon.
| Compound | Groups on C=O |
|---|---|
| Methanal | H, H |
| Ethanal | CH₃, H |
| Propanone | CH₃, CH₃ |
| Benzophenone | C₆H₅, C₆H₅ |
The correct order of reactivity towards HCN is:
(a) Methanal > ethanal > propanone > benzophenone (b) Ethanal > methanal > propanone > benzophenone (c) Benzophenone > propanone > ethanal > methanal (d) Methanal > propanone > ethanal > benzophenone
40. A graph of the rate of oxime formation (y-axis) against pH (x-axis, 1 to 7) rises, peaks near pH 3.5, then falls. Why does the rate fall at very low pH?
(a) The carbonyl oxygen is no longer protonated (b) Water hydrolyses only the product (c) Hydroxylamine is protonated and loses its free lone pair, so it is no longer a nucleophile (d) The reaction becomes reversible only at low pH
41. 5.8 g of propanone (M = 58 g/mol) reacts with excess CH₃MgBr, followed by hydrolysis. The mass of 2-methylpropan-2-ol (M = 74 g/mol) formed, at 100% yield, is:
(a) 5.8 g (b) 6.0 g (c) 8.8 g (d) 7.4 g
Passage for Q42–43: Priya has methyl 4-oxopentanoate, CH₃COCH₂CH₂COOCH₃. She wants to reduce only the ester to –CH₂OH and keep the ketone. She first treats it with ethylene glycol and dry HCl, then with LiAlH₄, and finally with dilute aqueous acid.
42. What does the ethylene glycol step do?
(a) It reduces the ketone (b) It converts the ketone into a cyclic ketal that LiAlH₄ does not attack (c) It hydrolyses the ester (d) It converts the ester into an acid
43. The final product after the dilute acid step is:
(a) Pentane-1,4-diol (b) 4-Oxopentanoic acid (c) Pentan-2-one (d) 5-Hydroxypentan-2-one
44. A molecule has a C=O group and also a group that is destroyed by strong acid. Which method best converts its C=O into CH₂?
(a) Wolff–Kishner reduction (b) Clemmensen reduction (c) NaBH₄ (d) LiAlH₄
45. Arrange in decreasing reactivity towards nucleophilic addition: (I) ethanal (II) propanone (III) methanal (IV) butanone.
(a) I > III > II > IV (b) III > I > IV > II (c) III > I > II > IV (d) III > II > I > IV
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | b | Oxime, hydrazone, phenylhydrazone, semicarbazone |
| 32 | d | Clemmensen Zn–Hg/HCl; Wolff–Kishner hydrazine + KOH; NaBH₄ hydride; H₂/Ni catalytic |
| 33 | a | Cyanohydrin, bisulphite adduct, acetal, 3° alcohol |
| 34 | c | CN⁻ is the nucleophile; dry HCl for acetals; pH 3.5 for Z–NH₂; ketals protect C=O |
| 35 | c | A, C, D, E true; benzaldehyde is less reactive than ethanal |
| 36 | a | Propanone gives propan-2-ol (B false); LiAlH₄ leaves isolated C=C alone (D false) |
| 37 | d | The NH₂ next to C=O shares its lone pair with C=O, so only the other NH₂ reacts |
| 38 | b | Propanone, cyclohexanone and acetophenone are ketones; the other three are aldehydes (1° alcohols) |
| 39 | a | More and bulkier groups mean more crowding and less δ+ on carbon |
| 40 | c | At very low pH, NH₂OH becomes NH₃OH⁺ and cannot attack |
| 41 | d | 0.1 mol propanone → 0.1 mol alcohol × 74 = 7.4 g |
| 42 | b | Ketal formation masks the ketone from LiAlH₄ |
| 43 | d | Ester → CH₂OH; acid removes the ketal and frees the ketone: CH₃COCH₂CH₂CH₂OH |
| 44 | a | Wolff–Kishner works in base, so the acid-sensitive group survives |
| 45 | c | Methanal > ethanal > propanone > butanone (ethyl crowds more than methyl) |