Chapter 5: Aldehydes and Ketones: Structure and Preparation
What you will learn
The structure and polarity of the carbonyl group, and why its carbon attracts nucleophiles.
How aldehydes and ketones are named.
General methods: oxidation of alcohols, ozonolysis and hydration of alkynes.
Named methods for aldehydes: Rosenmund, Stephen, Etard, side-chain chlorination, Gatterman–Koch.
Methods for ketones: Friedel–Crafts acylation, nitriles with Grignard reagents, dialkylcadmium.
5.1 Nature of the carbonyl group
The carbonyl group is >C=O. Aldehydes have at least one H on the carbonyl carbon (RCHO). Ketones have two carbon groups on it (RCOR′).
The carbonyl carbon is sp² hybridised. Its three sp² orbitals form three σ bonds in one plane, about 120° apart. The unhybridised p orbital on carbon overlaps sideways with a p orbital on oxygen to form the π bond. So the group is trigonal planar.
Oxygen is more electronegative than carbon. It pulls the π electrons towards itself. The C=O bond is therefore polar: carbon is partly positive and oxygen partly negative. This can be shown as a resonance hybrid of two forms:
This polarity sets up all the chemistry of later chapters:
The carbon is an electrophile. Nucleophiles attack it (Chapter 6).
The oxygen is a Lewis base. It takes up H⁺ or a Lewis acid, which makes the carbon even more electrophilic.
The C–H bonds next to C=O (α-hydrogens) become acidic (Chapter 7).
Carbonyl compounds have large dipole moments, larger than ethers of similar mass.
5.2 Naming aldehydes and ketones
In IUPAC names, aldehydes end in "-al" and ketones in "-one". The aldehyde carbon is always C1, so no number is needed for it. For ketones, number the chain to give the C=O the lowest number.
| Formula | Common name | IUPAC name |
|---|---|---|
| HCHO | formaldehyde | methanal |
| CH₃CHO | acetaldehyde | ethanal |
| CH₃CH₂CHO | propionaldehyde | propanal |
| (CH₃)₂CHCHO | isobutyraldehyde | 2-methylpropanal |
| C₆H₅CHO | benzaldehyde | benzenecarbaldehyde |
| CH₃COCH₃ | acetone | propanone |
| CH₃COCH₂CH₃ | ethyl methyl ketone | butanone |
| CH₃CH₂COCH₂CH₃ | diethyl ketone | pentan-3-one |
| C₆H₅COCH₃ | acetophenone | 1-phenylethan-1-one |
| C₆H₅COC₆H₅ | benzophenone | diphenylmethanone |
Aldehydes and ketones with the same formula are functional isomers. Propanal and propanone are both C₃H₆O.
5.3 General methods of preparation
Oxidation and dehydrogenation of alcohols. From Chapter 2: 1° alcohols give aldehydes with PCC or with hot copper at 573 K. 2° alcohols give ketones with K₂Cr₂O₇/H⁺ or hot copper.
Ozonolysis of alkenes. Ozone adds across C=C to form an ozonide. Zinc dust and water then split it into two carbonyl compounds. Zinc stops the aldehydes from being oxidised further by H₂O₂ formed.
To work backwards from products to the alkene, join the two carbonyl carbons by a double bond and remove the two oxygens.
Hydration of alkynes. With dilute H₂SO₄ and HgSO₄, an alkyne adds water. The enol formed changes at once to a carbonyl compound. Ethyne gives ethanal; every other alkyne gives a ketone.
5.4 Methods that give aldehydes
Rosenmund reduction. An acyl chloride is hydrogenated over palladium on barium sulphate. The catalyst is partly poisoned with sulphur or quinoline. This stops the aldehyde from being reduced further to an alcohol.
Rosenmund reduction cannot make methanal, because HCOCl is unstable.
Stephen reaction. A nitrile is reduced with stannous chloride and HCl to an imine (as its salt). Hydrolysis gives the aldehyde.
Diisobutylaluminium hydride (DIBAL-H) also reduces nitriles and esters to aldehydes at low temperature.
Etard reaction. Toluene (methylbenzene) is treated with chromyl chloride, CrO₂Cl₂, in CS₂. A brown chromium complex forms. Hydrolysis gives benzaldehyde. The methyl group stops at –CHO; it is not oxidised to –COOH.
CrO₃ in ethanoic anhydride does the same job. It gives benzylidene diacetate, C₆H₅CH(OCOCH₃)₂, which is hydrolysed to benzaldehyde.
Side-chain chlorination. Toluene with Cl₂ in sunlight gives benzal chloride, C₆H₅CHCl₂. Hydrolysis with water at 373 K gives benzaldehyde. This is used in industry.
Gatterman–Koch reaction. Benzene is treated with CO and HCl in the presence of anhydrous AlCl₃ (with CuCl). A –CHO group enters the ring, giving benzaldehyde.
Strong oxidants such as KMnO₄ convert toluene all the way to benzoic acid. That is why Etard needs the milder chromyl chloride.
5.5 Methods that give ketones
Friedel–Crafts acylation. Benzene reacts with an acyl chloride and anhydrous AlCl₃. The electrophile is the acylium ion, RC≡O⁺. The product is an aryl ketone.
The reaction fails on strongly deactivated rings such as nitrobenzene.
From nitriles and Grignard reagents. RMgX adds to the C≡N carbon. Hydrolysis of the imine salt gives a ketone.
From acyl chlorides and dialkylcadmium. The Grignard reagent first reacts with CdCl₂. The less reactive R₂Cd then stops at the ketone stage with an acyl chloride.
| Method | Starting compound | Reagent | Product |
|---|---|---|---|
| Rosenmund | RCOCl | H₂, Pd–BaSO₄ (poisoned) | RCHO |
| Stephen | RCN | SnCl₂/HCl, then H₃O⁺ | RCHO |
| DIBAL-H | RCN or RCOOR′ | DIBAL-H, then H₂O | RCHO |
| Etard | C₆H₅CH₃ | CrO₂Cl₂ in CS₂, then H₃O⁺ | C₆H₅CHO |
| Side-chain chlorination | C₆H₅CH₃ | Cl₂/hν, then H₂O at 373 K | C₆H₅CHO |
| Gatterman–Koch | C₆H₆ | CO + HCl, anhyd. AlCl₃/CuCl | C₆H₅CHO |
| Friedel–Crafts acylation | C₆H₆ | RCOCl, anhyd. AlCl₃ | C₆H₅COR |
| Nitrile + Grignard | RCN | R′MgX, then H₃O⁺ | RCOR′ |
| Dialkylcadmium | R′COCl | R₂Cd | R′COR |
| Ozonolysis | alkene | O₃, then Zn/H₂O | aldehydes and/or ketones |
| Alkyne hydration | alkyne | HgSO₄, dil. H₂SO₄ | ethanal (from ethyne) or ketone |
5.6 Physical properties
Methanal is a gas. Ethanal is a very volatile liquid. Other lower members are liquids, and higher ones are solids.
Boiling points lie between those of alkanes or ethers and those of alcohols of similar mass. Carbonyl compounds have strong dipole–dipole attractions, but no O–H to hydrogen-bond with each other.
| Compound (molar mass 58–60) | Boiling point (K) | Main attraction |
|---|---|---|
| n-Butane | 273 | van der Waals |
| Methoxyethane | 281 | weak dipole–dipole |
| Propanal | 322 | strong dipole–dipole |
| Propanone | 329 | strong dipole–dipole |
| Propan-1-ol | 370 | hydrogen bonding |
Methanal, ethanal and propanone mix with water in all proportions. Water forms hydrogen bonds with the carbonyl oxygen. Solubility falls as the carbon chain grows.
Lower aldehydes have sharp, irritating smells. Many larger aldehydes and ketones smell pleasant. Vanillin gives vanilla its smell; cinnamaldehyde gives dalchini (cinnamon) its smell.
Worked example 5.1: Give IUPAC names: (i) (CH₃)₂CHCHO (ii) CH₃COCH(CH₃)₂ (iii) C₆H₅COC₆H₅.
Solution: (i) Three-carbon chain with CHO as C1 and a methyl on C2: 2-methylpropanal. (ii) Four-carbon chain; C=O at C2 and methyl at C3: 3-methylbutan-2-one. (iii) A C=O with two phenyl groups: diphenylmethanone (benzophenone).
Worked example 5.2: Explain why propanal (322 K) boils above methoxyethane (281 K) but below propan-1-ol (370 K).
Solution: All three have similar molar mass. Propanal has a strongly polar C=O and strong dipole–dipole attraction, more than the ether. But propanal has no O–H, so it cannot form hydrogen bonds with itself as propan-1-ol does. Hence the middle position.
Worked example 5.3: An alkene C₆H₁₂ on ozonolysis gives only propanone. Identify it.
Solution: Two propanone units, (CH₃)₂C=O, are joined at their carbonyl carbons. The alkene is (CH₃)₂C=C(CH₃)₂, 2,3-dimethylbut-2-ene. It has six carbons, which matches C₆H₁₂.
Worked example 5.4: Benzoyl chloride is hydrogenated over Pd–BaSO₄. Name the product and the purpose of BaSO₄ and quinoline.
Solution: The product is benzaldehyde (Rosenmund reduction). BaSO₄ is a poor support and quinoline poisons the palladium. Both lower the catalyst's activity, so the aldehyde is not reduced on to benzyl alcohol.
Worked example 5.5: Convert ethanenitrile into (i) ethanal and (ii) propanone.
Solution: (i) Stephen reaction: CH₃CN with SnCl₂/HCl gives CH₃CH=NH, which hydrolyses to CH₃CHO. (ii) Grignard route: CH₃CN with CH₃MgBr gives CH₃C(CH₃)=NMgBr; hydrolysis gives CH₃COCH₃.
Worked example 5.6: Toluene is treated (i) with CrO₂Cl₂ in CS₂ followed by H₃O⁺ and (ii) with hot alkaline KMnO₄ followed by acid. Give the products.
Solution: (i) Etard reaction stops at the aldehyde: benzaldehyde. (ii) KMnO₄ is a strong oxidant. It oxidises the methyl group fully: benzoic acid.
Worked example 5.7: 7.8 g of benzene is acylated with excess CH₃COCl and AlCl₃. The yield is 75%. Find the mass of acetophenone.
Solution: Moles of benzene = 7.8 ÷ 78 = 0.10. Acetophenone, C₆H₅COCH₃ (C₈H₈O), has molar mass 120 g/mol. Theoretical mass = 12.0 g. At 75% yield, mass = 9.0 g.
Worked example 5.8: An alkene C₅H₁₀ gives methanal and butanone on ozonolysis. Another isomer gives propanone and ethanal. Identify both.
Solution: Methanal (CH₂=O) + butanone (CH₃COCH₂CH₃) join to give CH₂=C(CH₃)CH₂CH₃, 2-methylbut-1-ene. Propanone + ethanal join to give (CH₃)₂C=CHCH₃, 2-methylbut-2-ene.
Worked example 5.9: How many aldehydes and ketones together have formula C₅H₁₀O?
Solution: Aldehydes (C₄H₉ group + CHO): pentanal, 2-methylbutanal, 3-methylbutanal, 2,2-dimethylpropanal = 4. Ketones: pentan-2-one, pentan-3-one, 3-methylbutan-2-one = 3. Total = 7 structural isomers.
Quick revision
Carbonyl carbon is sp², trigonal planar, about 120°. C=O is polar: carbon electrophilic, oxygen Lewis basic.
Aldehydes end in -al, ketones in -one. Benzophenone is diphenylmethanone.
Ozonolysis (O₃, then Zn/H₂O) splits C=C into two C=O. Ethyne + HgSO₄/H₂SO₄ gives ethanal; other alkynes give ketones.
Rosenmund: RCOCl + H₂ over poisoned Pd–BaSO₄ gives RCHO.
Stephen: RCN + SnCl₂/HCl, then H₃O⁺ gives RCHO. DIBAL-H also gives aldehydes.
Etard: toluene + CrO₂Cl₂ gives benzaldehyde. Gatterman–Koch: benzene + CO + HCl gives benzaldehyde.
Ketones: Friedel–Crafts acylation; RCN + R′MgX; R₂Cd + R′COCl.
Boiling points: alkane less than ether less than aldehyde/ketone less than alcohol for similar mass.
NEET traps
Using unpoisoned Pd in Rosenmund. The aldehyde would be reduced to an alcohol.
Writing propanal as the product of propyne hydration. Only ethyne gives an aldehyde.
Confusing Stephen (nitrile to aldehyde) with Rosenmund (acyl chloride to aldehyde).
Thinking carbonyl compounds hydrogen-bond with each other. They have only dipole–dipole attraction.
Expecting Friedel–Crafts acylation on nitrobenzene. The ring is too deactivated.
Using KMnO₄ to make benzaldehyde from toluene. It goes on to benzoic acid.
Practice MCQs: Chapter 5
Level 1: Concept check
1. The hybridisation of the carbonyl carbon is: (a) sp (b) sp² (c) sp³ (d) dsp²
2. The catalyst in Rosenmund reduction is: (a) Ni at 473 K (b) Pt black (c) Zn–Hg (d) Pd on BaSO₄, partly poisoned
3. In the Etard reaction, toluene is treated with: (a) CrO₂Cl₂ (b) KMnO₄ (c) SnCl₂/HCl (d) CO and HCl
4. The starting compound in the Stephen reaction is a: (a) Acyl chloride (b) Ketone (c) Nitrile (d) Ester
5. Benzene with CH₃COCl and anhydrous AlCl₃ gives: (a) Toluene (b) Acetophenone (c) Benzaldehyde (d) Benzophenone
6. The IUPAC name of CH₃COCH₂CH₃ is: (a) Butanone (b) Butanal (c) Propanone (d) Methylpropanone
7. Ethyne with dilute H₂SO₄ and HgSO₄ gives: (a) Ethanol (b) Propanone (c) Ethanoic acid (d) Ethanal
8. In the Gatterman–Koch reaction, benzene is treated with: (a) CrO₂Cl₂ (b) CH₃COCl (c) CO and HCl with anhydrous AlCl₃ (d) CHCl₃ and NaOH
9. The bond angle around the carbonyl carbon is close to: (a) 109.5° (b) 120° (c) 180° (d) 90°
10. Ozonolysis of ethene followed by Zn/H₂O gives: (a) Methanal (b) Ethanal (c) Methanoic acid (d) Ethane-1,2-diol
Level 2: NEET standard
11. In Rosenmund reduction, the catalyst is poisoned to: (a) Speed up the reaction (b) Remove HCl (c) Stop the aldehyde from being reduced to an alcohol (d) Prevent formation of the acyl chloride
12. Ozonolysis of 2,3-dimethylbut-2-ene gives: (a) Ethanal only (b) Propanal and ethanal (c) Butanone and methanal (d) Propanone only
13. CH₃CN reacts with C₂H₅MgBr and the product is hydrolysed. The final product is: (a) Butanone (b) Propanal (c) Butanal (d) Butan-2-ol
14. The correct order of boiling points is: (a) Propan-1-ol less than propanal less than methoxyethane less than n-butane (b) n-Butane less than methoxyethane less than propanal less than propan-1-ol (c) Methoxyethane less than n-butane less than propan-1-ol less than propanal (d) Propanal less than n-butane less than methoxyethane less than propan-1-ol
15. Propyne with dilute H₂SO₄ and HgSO₄ gives: (a) Propanal (b) Propan-2-ol (c) Propanone (d) Propanoic acid
16. An ester is converted directly to an aldehyde by: (a) LiAlH₄ at room temperature (b) NaBH₄ (c) Zn–Hg/HCl (d) DIBAL-H at low temperature, then H₂O
17. Toluene is treated with Cl₂ in sunlight and the product is hydrolysed at 373 K. The final product is: (a) Benzaldehyde (b) Benzyl alcohol (c) Benzoic acid (d) Chlorobenzene
18. Dialkylcadmium reacts with an acyl chloride to give: (a) An aldehyde (b) A ketone (c) A tertiary alcohol (d) An ester
19. 7.8 g of benzene gives acetophenone in 75% yield. The mass of acetophenone is: (a) 12.0 g (b) 7.8 g (c) 9.0 g (d) 6.0 g
20. In the carbonyl group: (a) Carbon is partly positive and acts as an electrophilic centre (b) Carbon is partly negative (c) Oxygen is partly positive (d) The bond is non-polar
21. Which reaction gives a ketone and NOT an aldehyde? (a) Rosenmund reduction of CH₃COCl (b) Stephen reduction of CH₃CN (c) Etard reaction of toluene (d) Oxidation of propan-2-ol with K₂Cr₂O₇/H⁺
22. The IUPAC name of benzophenone is: (a) 1-Phenylethanone (b) Diphenylmethanone (c) Benzenecarbaldehyde (d) Diphenylethanone
Level 3: Challenge
23. An alkene C₅H₁₀ gives methanal and butanone on ozonolysis. The alkene is: (a) Pent-1-ene (b) 2-Methylbut-2-ene (c) 2-Methylbut-1-ene (d) 3-Methylbut-1-ene
24. Acetophenone can be made from benzonitrile by: (a) CH₃MgBr, then H₃O⁺ (b) SnCl₂/HCl, then H₃O⁺ (c) H₂ over Pd–BaSO₄ (d) CrO₂Cl₂, then H₃O⁺
25. The total number of aldehydes and ketones (structural isomers) of formula C₅H₁₀O is: (a) 4 (b) 5 (c) 6 (d) 7
26. Friedel–Crafts acylation does NOT work well with: (a) Benzene (b) Nitrobenzene (c) Anisole (d) Toluene
27. 2.8 g of but-2-ene is ozonised and worked up with Zn/H₂O. The mass of ethanal formed is: (a) 2.2 g (b) 8.8 g (c) 4.4 g (d) 5.6 g
28. In the Stephen reaction, the species hydrolysed to give the aldehyde is: (a) An amine (b) An alcohol (c) An amide (d) An imine (as its salt)
29. Assertion (A): Aldehydes and ketones boil higher than ethers of similar molar mass. Reason (R): Aldehydes and ketones form intermolecular hydrogen bonds with one another. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: Hydration of propyne with HgSO₄ and dilute H₂SO₄ gives propanal. Statement II: In ozonolysis, zinc dust prevents the aldehydes formed from being oxidised to acids. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | b | Three σ bonds in a plane plus one π bond. |
| 2 | d | Poisoned Pd on BaSO₄ stops at the aldehyde. |
| 3 | a | Chromyl chloride forms the Etard complex. |
| 4 | c | RCN is reduced to an imine, then hydrolysed. |
| 5 | b | Acylation adds CH₃CO– to the ring. |
| 6 | a | Four carbons, C=O at C2 (no number needed). |
| 7 | d | Only ethyne gives an aldehyde on hydration. |
| 8 | c | CO + HCl with AlCl₃/CuCl adds –CHO. |
| 9 | b | Trigonal planar sp² carbon. |
| 10 | a | Each CH₂ becomes HCHO. |
| 11 | c | Lower activity prevents over-reduction. |
| 12 | d | Symmetric tetramethyl alkene gives two propanone. |
| 13 | a | Ethyl adds to CN carbon; hydrolysis gives CH₃COC₂H₅. |
| 14 | b | van der Waals less than weak dipole less than strong dipole less than H-bond. |
| 15 | c | Markovnikov enol tautomerises to propanone. |
| 16 | d | DIBAL-H stops at the aldehyde. |
| 17 | a | Benzal chloride hydrolyses to benzaldehyde. |
| 18 | b | R₂Cd is mild and stops at the ketone. |
| 19 | c | 0.1 mol × 120 g/mol × 0.75 = 9.0 g. |
| 20 | a | O pulls π electrons; C becomes δ+. |
| 21 | d | A 2° alcohol gives propanone. |
| 22 | b | Two phenyls on a one-carbon ketone. |
| 23 | c | CH₂=C(CH₃)CH₂CH₃. |
| 24 | a | CH₃ adds to the nitrile carbon; hydrolysis gives C₆H₅COCH₃. |
| 25 | d | Four aldehydes plus three ketones. |
| 26 | b | –NO₂ strongly deactivates the ring. |
| 27 | c | 0.05 mol alkene gives 0.10 mol (4.4 g) ethanal. |
| 28 | d | RCH=NH (as salt) hydrolyses to RCHO. |
| 29 | c | Higher b.p. comes from dipole–dipole forces, not H-bonds. |
| 30 | d | Propyne gives propanone; II is correct. |
Chapter 5 revision sheet
One-page summary
Carbonyl carbon is sp², trigonal planar, bond angles about 120°. C=O is polar: C is δ+, O is δ−.
Names: aldehydes end in "-al", ketones in "-one". C₆H₅CHO is benzaldehyde; C₆H₅COCH₃ is acetophenone (1-phenylethanone).
From alcohols: 1° → aldehyde (PCC, or Cu at 573 K); 2° → ketone (K₂Cr₂O₇/H⁺ or Cu at 573 K).
Ozonolysis (O₃, then Zn/H₂O) cuts C=C into two carbonyl compounds.
Alkyne hydration (H₂O, HgSO₄, dil. H₂SO₄): ethyne → ethanal; other alkynes → ketones.
Rosenmund: RCOCl + H₂ over Pd–BaSO₄ (poisoned) → RCHO.
Stephen: RCN + SnCl₂/HCl → imine → H₃O⁺ → RCHO.
DIBAL-H at low temperature reduces nitriles and esters to aldehydes.
Etard: toluene + CrO₂Cl₂, then H₃O⁺ → benzaldehyde. CrO₃ in acetic anhydride also works via benzylidene diacetate.
Side-chain chlorination: toluene → benzal chloride (C₆H₅CHCl₂) → hydrolysis at 373 K → benzaldehyde.
Gattermann–Koch: benzene + CO + HCl with anhydrous AlCl₃/CuCl → benzaldehyde.
Ketones: acyl chloride + dialkylcadmium (R'₂Cd); nitrile + RMgX then H₃O⁺; Friedel–Crafts acylation for aryl ketones.
Boiling point order (similar mass): alkane < ether < aldehyde/ketone < alcohol, because of dipole–dipole forces.
Small aldehydes and ketones mix with water (H-bonds to water); solubility falls as the chain grows.
Must-remember table
| Named method | Starting compound | Reagent | Product |
|---|---|---|---|
| Rosenmund | Acyl chloride | H₂, Pd–BaSO₄ | Aldehyde |
| Stephen | Nitrile | SnCl₂/HCl, then H₃O⁺ | Aldehyde |
| DIBAL-H | Nitrile or ester | DIBAL-H, then H₂O | Aldehyde |
| Etard | Toluene | CrO₂Cl₂, then H₃O⁺ | Benzaldehyde |
| Gattermann–Koch | Benzene | CO, HCl, AlCl₃/CuCl | Benzaldehyde |
| Cadmium route | Acyl chloride | R'₂Cd | Ketone |
| Grignard on nitrile | Nitrile | RMgX, then H₃O⁺ | Ketone |
| Friedel–Crafts acylation | Benzene | RCOCl, AlCl₃ | Aryl ketone |
Memory aids
"Rosenmund Reduces acid chloRide": R-R-R. The BaSO₄ poison stops it at the aldehyde.
"Stephen Starts with nitrile and SnCl₂": S-S-S, then hydrolysis.
"Etard needs Chrome": chromyl chloride on toluene.
"Gattermann–Koch = CO + HCl, a formyl chloride in disguise": it puts –CHO straight on benzene.
"DIBAL stops halfway": ester or nitrile → aldehyde, not alcohol or amine, at low temperature.
Concept connections
Ozonolysis and alkyne hydration come from Chemistry Book 15: Hydrocarbons.
Nitriles as starting materials link to Chemistry Book 18: Organic Compounds Containing Nitrogen.
sp² hybridisation and bond polarity are from Chemistry Book 3: Chemical Bonding and Molecular Structure.
Practice MCQs: Chapter 5, Level 4 (new NEET pattern)
31. Match List I (named reaction) with List II (reagent).
List I:
A. Rosenmund reduction
B. Stephen reaction
C. Etard reaction
D. Gattermann–Koch reaction
List II:
(i) CrO₂Cl₂, then H₃O⁺
(ii) CO, HCl, anhydrous AlCl₃/CuCl
(iii) H₂, Pd–BaSO₄
(iv) SnCl₂/HCl, then H₃O⁺
(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-iv, C-i, D-ii (d) A-i, B-iv, C-iii, D-ii
32. Match List I (starting material and reagent) with List II (product).
List I:
A. Ethyne + H₂O, HgSO₄/H₂SO₄
B. Propyne + H₂O, HgSO₄/H₂SO₄
C. Benzonitrile + CH₃MgBr, then H₃O⁺
D. Toluene + Cl₂/light (two steps), then H₂O at 373 K
List II:
(i) Benzaldehyde
(ii) Ethanal
(iii) Acetophenone
(iv) Propanone
(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-iii, C-iv, D-i (d) A-ii, B-iv, C-i, D-iii
33. Match List I (structure) with List II (IUPAC name).
List I:
A. CH₃COCH₂CH₃
B. C₆H₅COCH₃
C. (CH₃)₂CHCHO
D. OHC–CHO
List II:
(i) 2-Methylpropanal
(ii) Ethanedial
(iii) 1-Phenylethanone
(iv) Butan-2-one
(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-ii, D-i (c) A-iv, B-i, C-iii, D-ii (d) A-iv, B-iii, C-i, D-ii
34. Match List I (alkene) with List II (products of O₃, then Zn/H₂O).
List I:
A. But-2-ene
B. 2-Methylpropene
C. 2,3-Dimethylbut-2-ene
D. Propene
List II:
(i) Two molecules of ethanal
(ii) Propanone + methanal
(iii) Two molecules of propanone
(iv) Ethanal + methanal
(a) A-i, B-ii, C-iii, D-iv (b) A-i, B-iii, C-ii, D-iv (c) A-iv, B-ii, C-iii, D-i (d) A-i, B-ii, C-iv, D-iii
35. How many of the following statements are correct?
A. The carbonyl carbon is sp² hybridised.
B. In Rosenmund reduction, BaSO₄ poisons Pd so the aldehyde is not reduced further.
C. DIBAL-H at low temperature reduces esters to aldehydes.
D. Hydration of propyne gives propanal.
E. Aldehydes boil higher than alcohols of similar molar mass.
(a) Two (b) Three (c) Four (d) Five
36. Choose the correct set of methods that give benzaldehyde.
A. Toluene + CrO₂Cl₂, then H₃O⁺
B. Benzene + CO + HCl with anhydrous AlCl₃/CuCl
C. Benzoic acid + H₂ over Pd–BaSO₄
D. Toluene + CrO₃ in acetic anhydride, then hydrolysis
(a) A and B only (b) B, C and D only (c) A, C and D only (d) A, B and D only
37. Choose the correct statements about preparing ketones.
A. An acyl chloride with a dialkylcadmium gives a ketone.
B. A nitrile with a Grignard reagent, then hydrolysis, gives a ketone.
C. Friedel–Crafts acylation of benzene gives an aryl ketone.
D. Grignard reagents are preferred over R₂Cd with acyl chlorides because they stop at the ketone.
(a) A, B and C only (b) A and B only (c) B, C and D only (d) A, B, C and D
38. How many of these give an aldehyde (not a ketone) as the main product?
Ozonolysis of but-2-ene
PCC on propan-2-ol
Hydration of ethyne
Stephen reduction of CH₃CN
Butan-2-ol over Cu at 573 K
CH₃CH₂CN with DIBAL-H, then H₂O
(a) Two (b) Three (c) Four (d) Five
39. Study the data.
| Compound | Molar mass (g/mol) | Boiling point (K) |
|---|---|---|
| Butane | 58 | 273 |
| Methoxyethane | 60 | 281 |
| Propanal | 58 | 322 |
| Propan-1-ol | 60 | 370 |
Why does propanal sit between methoxyethane and propan-1-ol?
(a) Propanal molecules H-bond to each other (b) Propanal has the highest molar mass (c) Propanal is non-polar (d) Its dipole–dipole forces are stronger than the forces in the ether but weaker than H-bonding in the alcohol
40. A diagram shows a planar carbonyl group: C marked δ+, O marked δ−, three groups on C at about 120°. Which statement follows from the diagram?
(a) A nucleophile can attack the carbon from above or below the plane (b) Electrophiles attack the carbon (c) The carbon is sp³ (d) The C=O bond has no dipole moment
41. 7.8 g of benzene (M = 78 g/mol) is converted to benzaldehyde (M = 106 g/mol) by the Gattermann–Koch reaction with 80% yield. The mass of benzaldehyde is:
(a) 10.6 g (b) 8.48 g (c) 6.24 g (d) 8.0 g
Passage for Q42–43: A nitrile A, CH₃CN, is split into two flasks. Flask 1: SnCl₂/HCl, then H₃O⁺ gives B. Flask 2: CH₃MgBr in dry ether, then H₃O⁺ gives C.
42. B is:
(a) Ethanol (b) Ethanoic acid (c) Ethanal (d) Ethylamine
43. C is:
(a) Propanone (b) Propanal (c) Propan-2-ol (d) Butanone
44. An alkene C₆H₁₂ gives only propanone on ozonolysis. The alkene is:
(a) Hex-3-ene (b) 2-Methylpent-2-ene (c) 3-Methylpent-2-ene (d) 2,3-Dimethylbut-2-ene
45. Which reagent converts methyl propanoate (CH₃CH₂COOCH₃) directly into propanal?
(a) LiAlH₄ (b) DIBAL-H at low temperature, then H₂O (c) NaBH₄ (d) H₂, Pd–BaSO₄
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | c | Rosenmund H₂/Pd–BaSO₄; Stephen SnCl₂/HCl; Etard CrO₂Cl₂; Gattermann–Koch CO + HCl |
| 32 | b | Ethyne → ethanal; propyne → propanone; PhCN + CH₃MgBr → acetophenone; benzal chloride → benzaldehyde |
| 33 | d | Butan-2-one, 1-phenylethanone, 2-methylpropanal, ethanedial |
| 34 | a | Cut each C=C and put O on both ends |
| 35 | b | A, B, C true; propyne gives propanone; aldehydes boil below alcohols |
| 36 | d | C fails: Rosenmund needs the acyl chloride, not the acid |
| 37 | a | Grignard reagents react further with the ketone; that is why R₂Cd is used |
| 38 | c | But-2-ene ozonolysis, ethyne hydration, Stephen and DIBAL-H give aldehydes; the two 2° alcohols give ketones |
| 39 | d | Polar C=O gives dipole–dipole attraction, but there is no O–H for H-bonding |
| 40 | a | The planar δ+ carbon is open to nucleophiles from either face |
| 41 | b | 0.1 mol × 106 = 10.6 g; 80% = 8.48 g |
| 42 | c | Stephen reduction gives the aldehyde with the same carbons: ethanal |
| 43 | a | Grignard on a nitrile gives a ketone: CH₃COCH₃ |
| 44 | d | (CH₃)₂C=C(CH₃)₂ splits into two (CH₃)₂C=O |
| 45 | b | DIBAL-H stops esters at the aldehyde; LiAlH₄ goes to alcohols; NaBH₄ barely touches esters |