Chapter 6 of 12 · 21 min read

Chapter 4: Ethers

What you will learn

  • How ethers are named and why the C–O–C angle is larger than tetrahedral.

  • Two ways to make ethers: acid dehydration of alcohols and Williamson synthesis.

  • How to choose the right halide and alkoxide in a Williamson synthesis.

  • Which products form when HI cleaves an ether, and why.

  • Electrophilic substitution in anisole.

4.1 Classification and naming

An ether has an oxygen atom joined to two carbon groups, R–O–R′. If both groups are the same, the ether is simple or symmetrical. If they differ, it is mixed or unsymmetrical.

In IUPAC naming, an ether is an alkoxyalkane. The larger carbon group is the parent; the smaller one with the oxygen is the alkoxy prefix.

FormulaCommon nameIUPAC name
CH₃OCH₃dimethyl ethermethoxymethane
C₂H₅OC₂H₅diethyl etherethoxyethane
CH₃OCH₂CH₂CH₃methyl n-propyl ether1-methoxypropane
CH₃OCH(CH₃)₂methyl isopropyl ether2-methoxypropane
C₆H₅OCH₃anisolemethoxybenzene
C₆H₅OC₂H₅phenetoleethoxybenzene
(CH₃)₃COCH₃methyl tert-butyl ether2-methoxy-2-methylpropane

Ethers of the same molecular formula that differ only in the groups on either side of oxygen are metamers. For example, ethoxyethane and 1-methoxypropane are metamers.

4.2 Structure of ethers

The oxygen in an ether is sp³ hybridised, with two lone pairs. The molecule is bent, like water.

In methoxymethane the C–O–C angle is about 111.7°. This is larger than the tetrahedral 109.5°. The two methyl groups are bulky and repel each other, which opens the angle. The C–O bond length is about 141 pm, close to that in alcohols.

Because the molecule is bent, the two C–O bond dipoles do not cancel. Ethers have a small net dipole moment.

MoleculeAngle at oxygenMain reason
Water, H–O–Habout 104.5°two lone pairs squeeze the bonds
Methanol, C–O–Habout 108.9°lone pairs; one bulky group
Methoxymethane, C–O–Cabout 111.7°repulsion between two alkyl groups

4.3 Preparation by dehydration of alcohols

Ethanol heated with concentrated H₂SO₄ at 413 K, with ethanol in excess, gives ethoxyethane.

2C2H5OH→conc. H2SO4, 413 KC2H5OC2H5+H2O\mathrm{2C_2H_5OH \xrightarrow{conc.\ H_2SO_4,\ 413\ K} C_2H_5OC_2H_5 + H_2O}

The mechanism is SN2:

  1. One ethanol molecule is protonated to give C₂H₅OH₂⁺.

  2. A second ethanol molecule attacks the carbon of C₂H₅OH₂⁺ with its oxygen lone pair. Water leaves.

  3. The protonated ether loses H⁺ to give ethoxyethane.

This method has limits:

  • It suits only 1° alcohols. 2° and 3° alcohols lose water to give alkenes instead.

  • It makes only symmetrical ethers well. Two different alcohols give a mixture of three ethers.

  • Temperature must be controlled. At 443 K the same mixture gives ethene.

4.4 Williamson synthesis

An alkyl halide reacts with a sodium alkoxide or phenoxide. The alkoxide ion is the nucleophile; the halide ion leaves. The reaction is SN2.

R–X+R′–O−Na+→R–O–R′+NaX\mathrm{R\text{–}X + R'\text{–}O^-Na^+ \rightarrow R\text{–}O\text{–}R' + NaX}

It can make both simple and mixed ethers. The key is to choose the pair well.

  • The halide should be methyl or 1°. SN2 needs an unhindered carbon.

  • Alkoxide ions are strong bases. With a 3° halide they remove H⁺ and give an alkene by elimination, not an ether.

  • So for an ether with one 3° group, put the 3° group on the alkoxide, and use the small group as the halide.

Target etherCorrect pairWrong pair and what it gives
(CH₃)₃C–O–CH₃(CH₃)₃CO⁻Na⁺ + CH₃Br(CH₃)₃CBr + CH₃O⁻Na⁺ gives 2-methylpropene
C₆H₅–O–CH₃ (anisole)C₆H₅O⁻Na⁺ + CH₃IC₆H₅Br + CH₃O⁻Na⁺: no reaction, aryl halides resist SN2
C₂H₅–O–CH(CH₃)₂(CH₃)₂CHO⁻Na⁺ + C₂H₅Br(CH₃)₂CHBr + C₂H₅O⁻Na⁺ gives much propene

Think of it like a cricket fielder catching a ball: the alkoxide must reach the carbon from the back side. A 3° carbon is surrounded by fielders (methyl groups), so the alkoxide grabs a nearby H⁺ instead.

4.5 Physical properties

Ether molecules have no O–H, so they cannot hydrogen-bond with each other. Their boiling points are close to those of alkanes of similar mass and far below alcohols.

Compound (molar mass about 74)Boiling point (K)
Butan-1-ol390
Ethoxyethane308
n-Pentane (molar mass 72)309

Water can, however, donate a hydrogen bond to the ether oxygen. So ethers dissolve in water about as well as alcohols of similar mass. Ethoxyethane and butan-1-ol dissolve to a similar extent, about 7.5 g and 9 g per 100 g of water.

4.6 Cleavage of ethers by HX

The C–O bond in ethers is strong. Ethers do not react with bases, dilute acids, sodium or mild oxidants. But hot concentrated HI or HBr cleaves them.

R–O–R′+HI→R–I+R′–OH\mathrm{R\text{–}O\text{–}R' + HI \rightarrow R\text{–}I + R'\text{–}OH}

With excess HI, the alcohol formed also changes to an alkyl iodide: R′OH + HI → R′I + H₂O.

Reactivity of the acids is HI greater than HBr greater than HCl. HI has the weakest H–X bond and I⁻ is the best nucleophile.

Step 1 is always protonation of oxygen. This turns a poor leaving group (RO⁻) into a good one (ROH). What happens next depends on the groups.

Ether typeMechanismWhich group becomes iodideExample
Methyl or 1° / 1° or 2°SN2the smaller, less hindered groupCH₃OC₂H₅ + HI → CH₃I + C₂H₅OH
One group 3°SN1the 3° group (stable carbocation)(CH₃)₃COCH₃ + HI → (CH₃)₃CI + CH₃OH
Alkyl aryl etherSN2 on the alkyl carbonalways the alkyl groupC₆H₅OCH₃ + HI → C₆H₅OH + CH₃I

Why does an aryl ether never give iodobenzene? The O–aryl bond has partial double-bond character from resonance, and the ring carbon is sp². I⁻ cannot attack it. So phenol and an alkyl iodide form. Phenol does not react further with HI.

The reaction of HI with methoxy compounds is used to count –OCH₃ groups (Zeisel method). The CH₃I formed is passed into alcoholic AgNO₃ and weighed as AgI.

4.7 Electrophilic substitution in anisole

The –OCH₃ group pushes electron density into the ring by resonance (+R). It activates the ring and directs to ortho and para. It is a slightly weaker activator than –OH.

ReactionReagentsMain products
BrominationBr₂ in ethanoic acid (no catalyst needed)p-bromoanisole (major), o-bromoanisole
Nitrationconc. HNO₃ + conc. H₂SO₄4-nitroanisole (major), 2-nitroanisole
Friedel–Crafts alkylationCH₃Cl, anhydrous AlCl₃4-methylanisole (major), 2-methylanisole
Friedel–Crafts acylationCH₃COCl, anhydrous AlCl₃4-methoxyacetophenone (major), 2-methoxyacetophenone

Para products are major because the bulky –OCH₃ group crowds the ortho positions.

4.8 Uses

  • Ethoxyethane: a common solvent for oils, fats and Grignard reactions. It was once used as an anaesthetic.

  • Anisole: in perfumes and as a starting material for drugs.

  • 2-Methoxy-2-methylpropane: a petrol additive that improves burning.

  • Ethers left in air slowly form peroxides, which can explode on distillation. Old bottles of ether are handled with care.

Worked example 4.1: Give IUPAC names: (i) CH₃OCH₂CH₂CH₃ (ii) C₆H₅OC₂H₅ (iii) (CH₃)₂CHOCH₃.

Solution: (i) The larger group is propyl, joined at C1: 1-methoxypropane. (ii) The ring is the parent: ethoxybenzene. (iii) The larger group is isopropyl, joined at C2: 2-methoxypropane.

Worked example 4.2: How many ethers have the formula C₄H₁₀O? Which of them are metamers?

Solution: The two carbon groups must add to four carbons. Options: C1 + C3 (two ways, since C3 can be n-propyl or isopropyl) and C2 + C2. So three ethers: 1-methoxypropane, 2-methoxypropane and ethoxyethane. Ethoxyethane is a metamer of each methoxypropane, because the groups on the two sides of O differ.

Worked example 4.3: The C–O–C angle in methoxymethane is 111.7° while the H–O–H angle in water is 104.5°. Explain.

Solution: Both have sp³ oxygen with two lone pairs. In water the two small H atoms let the lone pairs push the bonds closer. In methoxymethane the two methyl groups are bulky. Their repulsion outweighs the lone-pair push and opens the angle slightly beyond 109.5°.

Worked example 4.4: Suggest the best Williamson synthesis of 2-ethoxy-2-methylpropane, (CH₃)₃COC₂H₅.

Solution: The two groups are tert-butyl (3°) and ethyl (1°). The halide must be the 1° group. Use sodium tert-butoxide, (CH₃)₃CO⁻Na⁺, with bromoethane. The reverse pair, (CH₃)₃CBr + C₂H₅O⁻Na⁺, gives mainly 2-methylpropene by elimination.

Worked example 4.5: Give the products with one equivalent of hot HI: (i) CH₃OCH₂CH₃ (ii) (CH₃)₃COCH₃ (iii) C₆H₅OCH₃.

Solution: (i) Both groups are unhindered, so SN2. I⁻ attacks the smaller methyl: CH₃I + CH₃CH₂OH. (ii) One group is 3°, so SN1. The 3° carbocation forms and takes I⁻: (CH₃)₃CI + CH₃OH. (iii) I⁻ attacks only the methyl carbon: C₆H₅OH + CH₃I.

Worked example 4.6: Why can't 2-methoxy-2-methylpropane be made by heating methanol and 2-methylpropan-2-ol with conc. H₂SO₄?

Solution: The 3° alcohol forms a stable carbocation very easily. That carbocation loses H⁺ to give 2-methylpropene faster than methanol can attack it. Also, a mixture of two alcohols would give three ethers. Williamson synthesis with sodium tert-butoxide and CH₃I is the right route.

Worked example 4.7: 1.08 g of anisole is heated with excess HI. The CH₃I formed is passed into alcoholic AgNO₃. Find the mass of AgI precipitated.

Solution: Molar mass of anisole, C₇H₈O, is 108 g/mol. Moles = 1.08 ÷ 108 = 0.010. One –OCH₃ gives one CH₃I, which gives one AgI. Molar mass of AgI = 108 + 127 = 235 g/mol. Mass = 0.010 × 235 = 2.35 g.

Worked example 4.8: Compound X, C₅H₁₂O, does not react with sodium. Cold concentrated HI converts it into methanol and a tertiary alkyl iodide. Identify X.

Solution: No reaction with Na means no O–H, so X is an ether. One product is methanol, so one group is CH₃. The other group has four carbons and is 3°: tert-butyl. The tert-butyl group leaves as a carbocation (SN1) and becomes (CH₃)₃CI. X is 2-methoxy-2-methylpropane, (CH₃)₃COCH₃.

Quick revision

  • Ethers: R–O–R′, named as alkoxyalkanes; the larger group is the parent.

  • O is sp³; C–O–C angle in methoxymethane is about 111.7° because of alkyl–alkyl repulsion.

  • Ethanol + conc. H₂SO₄ at 413 K (excess ethanol): ethoxyethane by SN2. Works for 1° alcohols only.

  • Williamson: RX + R′O⁻Na⁺, SN2. Halide must be methyl or 1°; put any 3° group on the alkoxide.

  • Ethers boil like alkanes but dissolve in water like alcohols of similar mass.

  • HI cleavage: SN2 puts I on the smaller group; SN1 puts I on the 3° group; aryl ethers give phenol + alkyl iodide.

  • –OCH₃ is activating and o/p directing; para product is major.

NEET traps

  • Making anisole from bromobenzene and sodium methoxide. Aryl halides do not undergo SN2.

  • Using a 3° alkyl halide in Williamson synthesis. It gives an alkene.

  • Writing iodobenzene as a product of anisole + HI.

  • For CH₃OC₂H₅ + HI, putting the iodide on ethyl. The smaller methyl group gets I⁻.

  • For (CH₃)₃COCH₃ + HI, putting iodide on methyl. Here SN1 gives the 3° iodide.

  • Assuming ethers boil high because they are polar. Without O–H they cannot H-bond among themselves.

Practice MCQs: Chapter 4

Level 1: Concept check

1. The IUPAC name of CH₃OC₂H₅ is: (a) Methoxyethane (b) Ethoxymethane (c) Ethyl methyl ether (d) Propan-1-ol

2. The C–O–C bond angle in methoxymethane is about: (a) 104.5° (b) 109.5° (c) 111.7° (d) 120°

3. Williamson synthesis uses: (a) An alcohol and conc. H₂SO₄ (b) An alkyl halide and a sodium alkoxide (c) An alkene and water (d) An aldehyde and a Grignard reagent

4. Anisole is: (a) Ethoxybenzene (b) Phenylmethanol (c) Methylphenol (d) Methoxybenzene

5. Ethers are cleaved most readily by: (a) NaOH (b) Na metal (c) HI (d) HCl

6. Ethanol in excess with conc. H₂SO₄ at 413 K gives: (a) Ethoxyethane (b) Ethene (c) Ethanal (d) Ethanoic acid

7. Anisole is heated with HI. The products are: (a) Iodobenzene and methanol (b) Phenol and methyl iodide (c) Benzene and CH₃OI (d) Iodobenzene and methyl iodide

8. Compared with an isomeric alcohol, an ether has: (a) A higher boiling point (b) The same boiling point (c) No dipole moment (d) A lower boiling point

9. The mechanism of Williamson synthesis with a primary halide is: (a) SN2 (b) SN1 (c) E1 (d) Electrophilic addition

10. The hybridisation of oxygen in ethoxyethane is: (a) sp (b) sp² (c) sp³ (d) sp³d

Level 2: NEET standard

11. The best way to make (CH₃)₃C–O–CH₃ is: (a) (CH₃)₃CBr + CH₃ONa (b) (CH₃)₃COH + CH₃OH with conc. H₂SO₄ at 443 K (c) (CH₃)₃CBr + CH₃OH (d) (CH₃)₃CONa + CH₃Br

12. CH₃OCH₂CH₃ reacts with one equivalent of hot HI to give: (a) CH₃OH + CH₃CH₂I (b) CH₃I + CH₃CH₂OH (c) CH₃I + CH₃CH₂I only (d) CH₄ + CH₃CHO

13. (CH₃)₃COCH₃ reacts with HI to give: (a) (CH₃)₃CI + CH₃OH (b) (CH₃)₃COH + CH₃I (c) (CH₃)₂C=CH₂ + CH₃I + H₂O only (d) No reaction

14. The number of isomeric ethers with formula C₄H₁₀O is: (a) 2 (b) 4 (c) 3 (d) 5

15. Anisole with Br₂ in ethanoic acid gives mainly: (a) m-Bromoanisole (b) Bromobenzene (c) 2,4,6-Tribromophenol (d) p-Bromoanisole

16. The order of reactivity of hydrogen halides in cleaving ethers is: (a) HCl greater than HBr greater than HI (b) HI greater than HBr greater than HCl (c) HBr greater than HI greater than HCl (d) All equal

17. Ethoxyethane and butan-1-ol have similar solubility in water because: (a) Both form H-bonds among their own molecules (b) Both are ionic (c) Water can form H-bonds with the oxygen of both (d) Both have the same boiling point

18. Which pair will NOT give anisole? (a) C₆H₅Br + CH₃ONa (b) C₆H₅ONa + CH₃I (c) C₆H₅ONa + CH₃Br (d) C₆H₅OH + CH₃I in presence of K₂CO₃

19. 1.08 g of anisole is cleaved by excess HI and the CH₃I is converted to AgI. The mass of AgI is: (a) 1.08 g (b) 2.35 g (c) 4.70 g (d) 1.42 g

20. Ethoxyethane with excess hot HI gives: (a) C₂H₅OH only (b) C₂H₅I + C₂H₅OH (c) Ethene and water (d) 2C₂H₅I + H₂O

21. Anisole with CH₃COCl and anhydrous AlCl₃ gives mainly: (a) Phenyl ethanoate (b) 3-Methoxyacetophenone (c) 4-Methoxyacetophenone (d) Methyl benzoate

22. 2-Methylpropan-2-ol heated with conc. H₂SO₄ gives mainly: (a) 2-Methylpropene (b) Di-tert-butyl ether (c) 2-Methylpropanal (d) Butan-2-one

Level 3: Challenge

23. X (C₅H₁₂O) does not react with Na. With cold HI it gives methanol and a 3° alkyl iodide. X is: (a) 1-Methoxybutane (b) 2-Methoxy-2-methylpropane (c) 2-Methylbutan-2-ol (d) 1-Ethoxypropane

24. Anisole with HI does not give iodobenzene because: (a) HI is too weak an acid (b) Iodobenzene is unstable (c) Phenol is a stronger nucleophile than I⁻ (d) The aryl C–O bond has partial double-bond character and SN2 at an sp² ring carbon is not possible

25. (CH₃)₃CBr treated with CH₃O⁻Na⁺ gives mainly: (a) 2-Methylpropene (b) 2-Methoxy-2-methylpropane (c) 2-Methylpropan-2-ol (d) Dimethyl ether

26. An ether gives ethyl iodide and propan-2-ol with one equivalent of HI. The ether is: (a) 1-Ethoxypropane (b) Ethoxyethane (c) 2-Ethoxypropane (d) 2-Methoxybutane

27. 1.38 g of a compound of molar mass 138 g/mol gives 4.70 g of AgI in the Zeisel method. The number of –OCH₃ groups per molecule is: (a) 1 (b) 2 (c) 3 (d) 4

28. Which statement about ethers is correct? (a) Ethers react with sodium to give H₂ (b) The C–O–C angle is smaller than in water (c) Ethers have zero dipole moment (d) Ethers have a net dipole because the molecule is bent

29. Assertion (A): Ethoxyethane boils far below butan-1-ol. Reason (R): Ether molecules cannot form hydrogen bonds with one another. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: A tertiary alkyl halide with sodium methoxide gives the ether as the main product. Statement II: Alkoxide ions are strong bases as well as good nucleophiles. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1aLarger group (ethane) is the parent; CH₃O– is methoxy.
2cAlkyl–alkyl repulsion opens the angle to 111.7°.
3bRX + R′O⁻Na⁺ → ROR′.
4dAnisole = C₆H₅OCH₃.
5cHI is the strongest acid and I⁻ the best nucleophile.
6a413 K with excess alcohol favours the ether.
7bI⁻ attacks CH₃; the aryl C–O stays.
8dNo H-bonding between ether molecules.
9aBackside attack by alkoxide in one step.
10cTwo bonds and two lone pairs.
11d3° group on the alkoxide, methyl as the halide.
12bSN2 at the smaller methyl group.
13aSN1 through the stable 3° carbocation.
14c1-Methoxypropane, 2-methoxypropane, ethoxyethane.
15d–OCH₃ directs o/p; para is less crowded.
16bOrder follows acid strength and nucleophilicity of X⁻.
17cWater donates H-bonds to the ether oxygen too.
18aAryl halides do not undergo SN2 with alkoxides.
19b0.010 mol × 235 g/mol = 2.35 g.
20dEthanol formed is also converted to C₂H₅I.
21cPara acylation of the activated ring.
22a3° alcohols dehydrate to alkenes, not ethers.
23bMethyl + tert-butyl ether; SN1 gives (CH₃)₃CI.
24dAryl carbon cannot be attacked by I⁻.
25aStrong base with a 3° halide favours elimination.
26cSN2 at the less hindered ethyl leaves propan-2-ol.
27b0.020 mol AgI per 0.010 mol compound = 2.
28dBent shape: bond dipoles do not cancel.
29aLack of H-bonding explains the low boiling point.
30d3° halide gives elimination; II is true.

Chapter 4 revision sheet

One-page summary

  • Ethers: R–O–R'. Symmetrical (same groups) or unsymmetrical (mixed).

  • IUPAC: alkoxyalkane, smaller group named as alkoxy: CH₃OC₂H₅ is methoxyethane; C₆H₅OCH₃ is methoxybenzene (anisole).

  • C–O–C angle in methoxymethane is about 111.7°, a little above tetrahedral, because the two alkyl groups repel.

  • Acid dehydration of alcohols (conc. H₂SO₄, 413 K) suits only primary alcohols; 2° and 3° alcohols give alkenes instead.

  • Williamson synthesis: R–X + R'O⁻Na⁺ → R–O–R' (SN2). Use a primary (or methyl) halide; a tertiary halide gives an alkene by elimination.

  • Alkyl aryl ethers: sodium phenoxide + alkyl halide. Aryl halide + alkoxide does not work.

  • Boiling point: ethers boil close to alkanes of similar mass, far below alcohols (no H-bonds between ether molecules).

  • Solubility: similar to alcohols of similar mass (ether O accepts H-bonds from water). Ethoxyethane and butan-1-ol both dissolve to about 7.5 g per 100 g water.

  • Cleavage with HX (HI > HBr > HCl): R–O–R + HI → ROH + RI; with excess hot HI, both groups become iodides.

  • Methyl + 1°/2° alkyl: iodide attacks the methyl carbon (SN2) → CH₃I. Tertiary alkyl: SN1 → tertiary iodide + CH₃OH.

  • Anisole + HI → phenol + CH₃I. The O–aryl bond has partial double-bond character and does not break.

  • –OCH₃ is activating and o/p directing: anisole gives mainly para products in bromination, nitration and Friedel–Crafts reactions.

Must-remember table

Ether + HIProductsWhy
CH₃OC₂H₅CH₃I + C₂H₅OHSN2 at the less hindered methyl
(CH₃)₃COCH₃(CH₃)₃CI + CH₃OHSN1 via the stable 3° cation
C₆H₅OCH₃C₆H₅OH + CH₃IO–aryl bond is strong
C₂H₅OC₂H₅ (excess HI)2 C₂H₅I + H₂OEthanol formed reacts again
Anisole reactionMain product
Br₂ in ethanoic acid4-Bromoanisole
Conc. HNO₃ + conc. H₂SO₄4-Nitroanisole (some 2-nitro)
CH₃COCl, anhydrous AlCl₃4-Methoxyacetophenone
CH₃Cl, anhydrous AlCl₃4-Methylanisole (some 2-methyl)

Memory aids

  • "Williamson Wants an unhindered halide": the halide side must be methyl or 1°; the bulky group goes on the alkoxide.

  • "Methyl Moves, Tertiary Takes": in HI cleavage, the methyl leaves as CH₃I unless a tertiary group is present; then the tertiary group takes the iodide.

  • "Aryl Always keeps its Oxygen": an aryl ether always gives a phenol, never an aryl iodide.

  • "Ether opens its arms": C–O–C angle 111.7° is wider than water's 104.5°.

Concept connections

  • SN1, SN2 and elimination behind Williamson and HI cleavage come from Chemistry Book 16: Organic Compounds Containing Halogens.

  • Bond angles and H-bonding link to Chemistry Book 3: Chemical Bonding and Molecular Structure.

  • Ring substitution of anisole follows Chemistry Book 15: Hydrocarbons.

Practice MCQs: Chapter 4, Level 4 (new NEET pattern)

31. Match List I (ether heated with HI) with List II (products).

List I:

  • A. CH₃OCH₂CH₃ (one equivalent HI)

  • B. C₆H₅OCH₃

  • C. (CH₃)₃COCH₃

  • D. C₂H₅OC₂H₅ (excess HI)

List II:

  • (i) CH₃I + CH₃CH₂OH

  • (ii) C₆H₅OH + CH₃I

  • (iii) (CH₃)₃CI + CH₃OH

  • (iv) 2 CH₃CH₂I + H₂O

(a) A-i, B-ii, C-iii, D-iv  (b) A-i, B-iii, C-ii, D-iv  (c) A-iii, B-ii, C-i, D-iv  (d) A-i, B-ii, C-iv, D-iii

32. Match List I (target ether) with List II (best Williamson pair).

List I:

  • A. (CH₃)₃C–O–CH₃

  • B. C₆H₅–O–CH₂CH₃

  • C. CH₃CH₂–O–CH₂CH₃

  • D. C₆H₅CH₂–O–CH₃

List II:

  • (i) C₂H₅ONa + C₂H₅Br

  • (ii) C₆H₅CH₂ONa + CH₃I

  • (iii) (CH₃)₃CONa + CH₃Br

  • (iv) C₆H₅ONa + C₂H₅Br

(a) A-iv, B-iii, C-i, D-ii  (b) A-iii, B-iv, C-ii, D-i  (c) A-iii, B-iv, C-i, D-ii  (d) A-i, B-iv, C-iii, D-ii

33. Match List I (structure) with List II (IUPAC name).

List I:

  • A. CH₃OCH₂CH₂CH₃

  • B. C₆H₅OCH₃

  • C. CH₃CH₂OCH₂CH₃

  • D. (CH₃)₂CHOCH₃

List II:

  • (i) Ethoxyethane

  • (ii) 2-Methoxypropane

  • (iii) 1-Methoxypropane

  • (iv) Methoxybenzene

(a) A-ii, B-iv, C-i, D-iii  (b) A-iii, B-iv, C-i, D-ii  (c) A-iii, B-i, C-iv, D-ii  (d) A-iv, B-iii, C-i, D-ii

34. Match List I (reaction of anisole) with List II (main product).

List I:

  • A. Br₂ in ethanoic acid

  • B. CH₃COCl with anhydrous AlCl₃

  • C. Conc. HNO₃ + conc. H₂SO₄

  • D. HI, heat

List II:

  • (i) Phenol + iodomethane

  • (ii) 4-Nitroanisole

  • (iii) 4-Methoxyacetophenone

  • (iv) 4-Bromoanisole

(a) A-iii, B-iv, C-ii, D-i  (b) A-iv, B-ii, C-iii, D-i  (c) A-iv, B-iii, C-i, D-ii  (d) A-iv, B-iii, C-ii, D-i

35. How many of the following statements are correct?

  • A. Ethers boil at much lower temperatures than isomeric alcohols.

  • B. Ethoxyethane and butan-1-ol have similar solubility in water.

  • C. The C–O–C angle in methoxymethane is less than 109.5°.

  • D. Ethers are fairly unreactive towards bases.

  • E. Acid dehydration of secondary alcohols is a good way to make ethers.

(a) One  (b) Two  (c) Four  (d) Three

36. Choose the correct set of statements about the Williamson synthesis.

  • A. It proceeds by an SN2 mechanism.

  • B. A tertiary halide with sodium methoxide gives mainly an alkene.

  • C. An aryl halide with sodium ethoxide is a good route to an alkyl aryl ether.

  • D. It can make both symmetrical and unsymmetrical ethers.

(a) A, B and D only  (b) A and C only  (c) B, C and D only  (d) A and B only

37. Choose the correct statements about cleavage of ethers by HI.

  • A. Reactivity of halogen acids is HI > HBr > HCl.

  • B. Anisole gives iodobenzene and methanol.

  • C. tert-Butyl methyl ether gives tert-butyl iodide by an SN1 path.

  • D. The ether oxygen is protonated first.

(a) A and B only  (b) B, C and D only  (c) A, C and D only  (d) C and D only

38. How many of these ethers give methyl iodide as one product with one equivalent of HI?

  • CH₃OC₂H₅

  • C₆H₅OCH₃

  • (CH₃)₃COCH₃

  • CH₃OCH(CH₃)₂

  • C₂H₅OC₂H₅

(a) Two  (b) Three  (c) Four  (d) Five

39. Study the data.

CompoundMolar mass (g/mol)Boiling point (K)
Pentane72309
Ethoxyethane74308
Butan-1-ol74391

The best explanation of the pattern is:

(a) Ethoxyethane has a higher molar mass than pentane  (b) Ethoxyethane is completely non-polar  (c) Ether molecules cannot H-bond to each other, but butan-1-ol molecules can  (d) Butan-1-ol has only dipole–dipole forces

40. A diagram of methoxymethane shows two CH₃ groups on an sp³ oxygen with the C–O–C angle marked 111.7°. Why is the angle above 109.5°?

(a) Oxygen is sp² hybridised  (b) Repulsion between the two bulky methyl groups opens the angle  (c) Lone pairs repel more strongly than in water  (d) Oxygen is sp hybridised

41. 0.1 mol of ethoxyethane is heated with excess HI. The mass of iodoethane (M = 156 g/mol) formed is:

(a) 31.2 g  (b) 15.6 g  (c) 46.8 g  (d) 23.4 g

Passage for Q42–43: Arjun wants to make 2-methoxy-2-methylpropane, (CH₃)₃C–O–CH₃. Route 1 uses (CH₃)₃CBr with CH₃ONa. Route 2 uses (CH₃)₃CONa with CH₃Br.

42. Which route gives the ether in good yield, and why?

(a) Route 2, because CH₃Br is unhindered and SN2 attack is easy  (b) Route 1, because the 3° halide forms a carbocation fastest  (c) Both routes equally  (d) Neither; ethers need an acid catalyst

43. The main organic product of Route 1 is:

(a) The target ether  (b) 2-Methylpropan-2-ol  (c) Methanol only  (d) 2-Methylpropene

44. Compound X (C₄H₁₀O) does not react with sodium metal. With excess hot HI it gives only one organic product, C₂H₅I. X is:

(a) 1-Methoxypropane  (b) Ethoxyethane  (c) Butan-1-ol  (d) 2-Methoxypropane

45. Which ether cannot be made in good yield by the Williamson synthesis, whichever halide and alkoxide are chosen?

(a) Ethoxyethane  (b) Methoxybenzene  (c) Di-tert-butyl ether  (d) 2-Methoxy-2-methylpropane

Level 4 answer key

QAnsReason
31aMethyl leaves as CH₃I (SN2); aryl keeps O; 3° group forms the iodide (SN1); excess HI turns both ethyls into C₂H₅I
32cBulky or aryl group goes on the oxygen; the halide is methyl or 1°
33b1-Methoxypropane, methoxybenzene, ethoxyethane, 2-methoxypropane
34d–OCH₃ directs para: 4-bromo, 4-acetyl, 4-nitro; HI gives phenol + CH₃I
35dA, B, D true; the angle is 111.7° (C false); 2° alcohols give alkenes (E false)
36aAryl halides do not undergo SN2, so C is false
37cAnisole gives phenol and CH₃I, so B is false
38bCH₃OC₂H₅, anisole and CH₃OCH(CH₃)₂ give CH₃I; the 3° ether gives (CH₃)₃CI; diethyl ether has no methyl
39cWithout O–H, ether molecules have only weak forces, like pentane; butan-1-ol H-bonds
40bSteric repulsion of the two methyl groups widens the angle
41aOne ether gives two C₂H₅I: 0.2 mol × 156 = 31.2 g
42aSN2 needs an unhindered halide; CH₃Br is ideal
43dMethoxide acts as a base on the 3° halide; elimination gives 2-methylpropene
44bNo O–H (no reaction with Na) and two identical ethyl groups give only C₂H₅I
45cEvery pair needs a tertiary halide, which eliminates instead of substituting
21 min left
‹
›