Last-Week Revision Kit
Use this section in the final week: read the glance sheet daily, test yourself on the 40 facts, tick the checklist, then sit Mock Test 2 under time.
Book-at-a-glance sheet
Chapter 1: Detection of Elements and Functional Groups
| Test for | Reagent | Result |
|---|---|---|
| N / N + S / S | FeSO₄ + H₂SO₄ / FeCl₃ / nitroprusside | Prussian blue / blood red / violet |
| Cl, Br, I | HNO₃ then AgNO₃ | White (dissolves in NH₃) / pale yellow (partly) / yellow (no) |
| Alcohol / phenol | CAN / neutral FeCl₃ | Red / violet |
| Aldehyde / ketone | Tollens' or Fehling's / nitroprusside + NaOH | Mirror or red ppt / red |
| Acid / 1° amine | NaHCO₃ / CHCl₃ + alc. KOH | CO₂ / foul smell |
Chapter 2: Preparation of Inorganic Compounds
| Salt | Formula | M (g mol⁻¹) | Look |
|---|---|---|---|
| Mohr's salt | FeSO₄·(NH₄)₂SO₄·6H₂O | 392 | Light green, monoclinic |
| Potash alum | K₂SO₄·Al₂(SO₄)₃·24H₂O | 948 | Colourless, octahedral |
Chapter 3: Preparation of Organic Compounds
| Product | Key reagent | Condition | M (g mol⁻¹) |
|---|---|---|---|
| Acetanilide | Acetic anhydride, Zn dust | Warm; m.p. 114 °C | 135 |
| p-Nitroacetanilide | HNO₃ + H₂SO₄ | Below 10 °C | 180 |
| Aniline yellow | NaNO₂/HCl, then aniline | 0–5 °C | 197 |
| Iodoform | I₂ + NaOH | Warm | 394 |
Chapter 4: Titrimetric Analysis
| Item | Fact |
|---|---|
| End-point rule | n₁M₁V₁ = n₂M₂V₂ |
| Methyl orange | 3.1–4.4, red → yellow; strong acid–weak base |
| Phenolphthalein | 8.3–10.0, colourless → pink; weak acid–strong base |
| KMnO₄ n-factor | 5 acid, 3 neutral, 1 strongly alkaline |
| Oxalate / Fe²⁺ ratio | 2 MnO₄⁻ : 5 C₂O₄²⁻ (warm) / 1 MnO₄⁻ : 5 Fe²⁺ (cold) |
Chapter 5: Qualitative Analysis: Anions
| Group | Anions | Key sign |
|---|---|---|
| Dilute H₂SO₄ | CO₃²⁻, S²⁻, NO₂⁻ | CO₂ milky lime water, H₂S rotten egg, brown NO₂ |
| Conc. H₂SO₄ | Cl⁻, Br⁻, I⁻, NO₃⁻ | HCl fumes, red-brown Br₂, violet I₂, brown NO₂ with Cu |
| Independent | SO₄²⁻ | White BaSO₄, insoluble in conc. HCl |
| Special tests | Brown ring, chromyl chloride | [Fe(H₂O)₅(NO)]²⁺; CrO₂Cl₂ → yellow PbCrO₄ |
Chapter 6: Qualitative Analysis: Cations
| Group | Reagent | Cations | Confirmatory |
|---|---|---|---|
| 0 | NaOH, heat | NH₄⁺ | Nessler's: brown |
| I | Dil. HCl | Pb²⁺ | KI: yellow PbI₂ |
| II | H₂S + HCl | Cu²⁺ (Pb²⁺) | NH₃: deep blue; K₄[Fe(CN)₆]: chocolate |
| III | NH₄OH + NH₄Cl | Fe³⁺, Al³⁺ | Prussian blue / blood red; blue lake |
| IV | H₂S + NH₄OH | Zn²⁺, Ni²⁺ | Zn(OH)₂ dissolves in NaOH; red Ni(dmg)₂ |
| V | (NH₄)₂CO₃ | Ca²⁺, Ba²⁺ | CaC₂O₄ white, brick red; BaCrO₄ yellow, apple green |
| VI | Na₂HPO₄ | Mg²⁺ | White Mg(NH₄)PO₄ |
Chapter 7: Physical Chemistry Experiments
| Item | Fact |
|---|---|
| Heat | q = (mc + W)ΔT, c = 4.18 J g⁻¹ K⁻¹ |
| CuSO₄ | ΔsolH −66.5 (anhydrous), +11.7 (pentahydrate), ΔhydH −78.2 kJ mol⁻¹ |
| Neutralisation | ≈ −57 kJ per mol water (strong + strong) |
| Sols | Fe(OH)₃ positive, As₂S₃ negative; Hardy–Schulze |
| Clock reaction | Rate = k[H₂O₂][I⁻]; rate ∝ 1/t |
40 rapid-fire facts
Lassaigne's test turns covalent N, S and halogens into ionic sodium salts.
Prussian blue is Fe₄[Fe(CN)₆]₃.
A blood-red colour with FeCl₃ in Lassaigne's test means N and S are both present.
Sodium nitroprusside gives a violet colour with S²⁻.
Hydrazine fails the Lassaigne nitrogen test because it has no carbon.
AgCl dissolves in dilute NH₃; AgI does not.
Neutral FeCl₃ gives a violet colour with phenol.
Ceric ammonium nitrate turns red with alcohols.
Benzaldehyde gives Tollens' test but not Fehling's test.
Carboxylic acids release CO₂ from NaHCO₃; phenols do not.
Only primary amines give the carbylamine test.
The azo dye test with β-naphthol identifies aromatic primary amines.
Mohr's salt is FeSO₄·(NH₄)₂SO₄·6H₂O, molar mass 392 g mol⁻¹.
Potash alum is K₂SO₄·Al₂(SO₄)₃·24H₂O, molar mass 948 g mol⁻¹.
Dilute H₂SO₄ in double-salt preparation suppresses hydrolysis.
Li⁺ does not form an alum.
Acetanilide melts at 114 °C.
Zinc dust prevents oxidation of aniline during acetylation.
Acetanilide is nitrated below 10 °C, and the para product is major.
Diazotisation is done at 0–5 °C.
Aniline yellow is p-aminoazobenzene.
Acetone needs 3 I₂ and 4 NaOH for one CHI₃.
Methanol and propan-1-ol do not give the iodoform test.
Methyl orange changes from red to yellow over pH 3.1–4.4.
Phenolphthalein changes from colourless to pink over pH 8.3–10.0.
KMnO₄ is a self-indicator, with n-factor 5 in acid.
HCl is not used to acidify KMnO₄ titrations.
The oxalic acid–KMnO₄ titration is warmed to 50–60 °C, and Mn²⁺ catalyses it.
The equivalent mass of oxalic acid dihydrate is 63 g.
The dilute H₂SO₄ group of anions is CO₃²⁻, S²⁻ and NO₂⁻.
The brown ring is [Fe(H₂O)₅(NO)]²⁺, with iron in the +1 state.
Only ionic chlorides give the chromyl chloride test; it ends in yellow PbCrO₄.
BaSO₄ is white and insoluble in conc. HCl.
Group II uses H₂S with dilute HCl; group IV uses H₂S with NH₄OH.
NH₄Cl in group III lowers [OH⁻] by the common ion effect.
Ni²⁺ gives a red precipitate with dimethylglyoxime.
Cu²⁺ with excess NH₃ gives deep blue [Cu(NH₃)₄]²⁺.
Calcium gives a brick-red flame; barium gives an apple-green flame.
Strong acid + strong base neutralisation releases about 57 kJ per mole of water.
Fe(OH)₃ sol is positive; As₂S₃ sol is negative.
Common mistakes checklist
I don't confuse blood red (N + S) with Prussian blue (N only) in Lassaigne's test.
I can say why the extract is boiled with HNO₃ before adding AgNO₃.
I don't think benzaldehyde gives Fehling's test.
I can write the formulas and molar masses of Mohr's salt and potash alum from memory.
I don't confuse the temperatures: nitration below 10 °C, diazotisation 0–5 °C, oxalate titration 50–60 °C.
I can pick methyl orange or phenolphthalein from the strength of the acid and base.
I don't use HCl or HNO₃ to acidify KMnO₄ titrations.
I don't put nitrate in the dilute acid group or nitrite in the concentrated acid group.
I don't confuse the group II reagent (H₂S + HCl) with the group IV reagent (H₂S + NH₄OH).
I can include the calorimeter's heat capacity W and get the sign of ΔH right.
Mock Test 2: New-pattern paper
Time: 35 minutes. Marking: +4 for a correct answer, −1 for a wrong one, 0 if left blank. Take c = 4.18 J g⁻¹ K⁻¹ and density of solutions 1 g mL⁻¹.
1. Sodium metal is used in Lassaigne's test because it: (a) is a strong oxidising agent (b) is a strong reducing agent that turns covalent N, S and halogen into ionic salts (c) makes the compound volatile (d) forms Na₂O, which dissolves the compound
2. Match List I (group) with List II (test).
List I:
A. Aldehyde
B. Methyl ketone
C. Phenol
D. Primary amine
List II:
(i) Carbylamine reaction
(ii) Liebermann's nitroso reaction
(iii) Schiff's reagent
(iv) Sodium nitroprusside in NaOH
(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-ii, C-iv, D-i (c) A-iii, B-iv, C-i, D-ii (d) A-iii, B-iv, C-ii, D-i
3. Assertion (A): Benzaldehyde does not reduce Fehling's solution. Reason (R): Fehling's solution is a milder oxidising agent than Tollens' reagent and is reduced by aliphatic aldehydes only. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
4. Mass of aluminium in 47.4 g of KAl(SO₄)₂·12H₂O (M = 474 g mol⁻¹) is: (a) 5.4 g (b) 1.35 g (c) 2.7 g (d) 4.74 g
5. How many of the following statements about Mohr's salt are correct?
A. It is light green.
B. Its crystals are monoclinic.
C. Iron in it is in the +3 state.
D. Its solution gives NH₃ when warmed with NaOH.
E. It has 12 molecules of water of crystallisation.
(a) 2 (b) 3 (c) 4 (d) 5
6. Assertion (A): Potash alum is used to clear muddy water. Reason (R): Potash alum is a double salt. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
7. Match List I (reaction) with List II (main product).
List I:
A. Aniline + acetic anhydride
B. Acetanilide + conc. HNO₃/H₂SO₄
C. Benzenediazonium chloride + aniline
D. Acetone + I₂/NaOH
List II:
(i) CHI₃
(ii) p-Aminoazobenzene
(iii) p-Nitroacetanilide
(iv) Acetanilide
(a) A-iii, B-iv, C-ii, D-i (b) A-iv, B-ii, C-iii, D-i (c) A-iv, B-iii, C-i, D-ii (d) A-iv, B-iii, C-ii, D-i
8. 1.16 g of acetone gives iodoform with 75% yield. Mass of iodoform obtained is: (a) 7.88 g (b) 3.94 g (c) 5.91 g (d) 4.43 g
9. Assertion (A): Direct nitration of aniline gives mainly p-nitroaniline in good yield. Reason (R): In strongly acidic medium aniline forms the anilinium ion, which is meta-directing. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
10. A pH curve starts near pH 11, falls slowly, and then drops sharply from about pH 7 to about pH 3 at the equivalence point. The suitable indicator is: (a) methyl orange (b) phenolphthalein (c) either of them (d) neither of them
11. Volume of 0.10 M oxalic acid oxidised by 25.0 mL of 0.040 M KMnO₄ in acidic medium is: (a) 10.0 mL (b) 4.0 mL (c) 25.0 mL (d) 62.5 mL
12. Choose the correct set of statements about KMnO₄ titrations.
A. The purple MnO₄⁻ becomes nearly colourless Mn²⁺ as it reacts.
B. HNO₃ is a good acid for these titrations.
C. The Mohr's salt titration is done without warming.
D. KMnO₄ solution is standardised before use.
(a) A and B only (b) A, C and D only (c) B and D only (d) A, B, C and D
Passage for Q13–14: 4.00 g of an impure sample of Mohr's salt is dissolved to make 100 mL. 20.0 mL of this solution, acidified with dilute H₂SO₄, needs 15.0 mL of 0.020 M KMnO₄. The impurity does not react.
13. Moles of Fe²⁺ in 20.0 mL of the solution are: (a) 1.5 × 10⁻³ (b) 3.0 × 10⁻⁴ (c) 7.5 × 10⁻³ (d) 6.0 × 10⁻⁴
14. Percentage purity of the sample is: (a) 36.8% (b) 14.7% (c) 58.8% (d) 73.5%
15. Match List I (anion) with List II (confirmatory observation).
List I:
A. NO₂⁻
B. Br⁻
C. SO₄²⁻
D. CO₃²⁻
List II:
(i) Gas turns lime water milky
(ii) White ppt with lead acetate, soluble in ammonium acetate
(iii) Blue colour with KI and starch in acid
(iv) Orange-brown chloroform layer with chlorine water
(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-ii, C-iv, D-i (c) A-iii, B-iv, C-ii, D-i (d) A-i, B-iv, C-ii, D-iii
16. Assertion (A): AgCl dissolves in dilute aqueous ammonia. Reason (R): AgCl is a white precipitate. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
17. A salt gave these results.
| Test | Observation |
|---|---|
| Dilute H₂SO₄ | Light brown fumes |
| Acidified solution + KI + starch | Blue colour |
The anion is: (a) NO₂⁻ (b) NO₃⁻ (c) Br⁻ (d) I⁻
18. How many of the following statements are correct?
A. Lime water turned milky by CO₂ clears with excess CO₂.
B. PbS is yellow.
C. Chromyl chloride is CrO₂Cl₂.
D. Iodide gives a violet chloroform layer with chlorine water.
E. Nitrate gives brown fumes with dilute H₂SO₄.
(a) 1 (b) 2 (c) 3 (d) 4
19. Match List I (cation) with List II (group).
List I:
A. Pb²⁺ (first appearance)
B. Al³⁺
C. Ni²⁺
D. Mg²⁺
List II:
(i) Group IV
(ii) Group VI
(iii) Group I
(iv) Group III
(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-iv, C-i, D-ii
20. A group V precipitate gave these results.
| Test | Observation |
|---|---|
| Dissolved in acetic acid, K₂CrO₄ added | Yellow ppt |
| Flame test | Apple green |
The cation is: (a) Ca²⁺ (b) Ba²⁺ (c) Pb²⁺ (d) Mg²⁺
21. Choose the correct set of statements.
A. Zn²⁺ gives a white ppt with NaOH that dissolves in excess.
B. Fe³⁺ gives a blood-red colour with KSCN.
C. NH₄⁺ gives a brown ppt with Nessler's reagent.
D. CuS is yellow.
(a) A, B and C only (b) A and D only (c) B, C and D only (d) A, B, C and D
22. Assertion (A): Zn²⁺ is precipitated in group IV as dirty white ZnS. Reason (R): ZnS is precipitated by H₂S in strongly acidic medium. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
Passage for Q23–24: A colourless salt solution gives no ppt with dilute HCl or with H₂S in acid. With NH₄OH in the presence of NH₄Cl it gives a white gelatinous ppt. This ppt dissolves in excess NaOH.
23. The cation is: (a) Zn²⁺ (b) Mg²⁺ (c) Fe³⁺ (d) Al³⁺
24. Its confirmatory test is: (a) a blue lake with litmus (b) a red ppt with dimethylglyoxime (c) Prussian blue with K₄[Fe(CN)₆] (d) an apple-green flame
25. 100 mL of 0.20 M HCl is mixed with 100 mL of 0.20 M NaOH. The temperature rises by 1.36 K. Ignoring the calorimeter, ΔneutH is: (a) −11.4 kJ mol⁻¹ (b) −28.4 kJ mol⁻¹ (c) −56.8 kJ mol⁻¹ (d) −68.0 kJ mol⁻¹
26. Match List I with List II.
List I:
A. Lyophilic sol
B. As₂S₃ sol
C. Dialysis
D. Hardy–Schulze rule
List II:
(i) Coagulating power rises with the charge of the opposite ion
(ii) Removes excess electrolyte through a membrane
(iii) Negatively charged lyophobic sol
(iv) Reversible sol made by direct mixing
(a) A-iii, B-iv, C-ii, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-iv, B-ii, C-iii, D-i (d) A-i, B-iii, C-ii, D-iv
27. For rate = k[H₂O₂][I⁻], a clock run takes 90 s. If [H₂O₂] is tripled and [I⁻] is doubled, with the same thiosulfate, the new time is: (a) 45 s (b) 30 s (c) 18 s (d) 15 s
28. Assertion (A): ΔneutH of CH₃COOH with NaOH is less negative than −57 kJ mol⁻¹. Reason (R): Part of the heat released is used to ionise acetic acid. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
29. How many of the following statements are correct?
A. Dissolving anhydrous CuSO₄ in water is exothermic.
B. Fe(OH)₃ sol is made by adding FeCl₃ to boiling water.
C. As₂S₃ sol is positively charged.
D. Starch is the indicator in the iodide clock reaction.
E. The time for the blue colour increases when [H₂O₂] is increased.
(a) 1 (b) 2 (c) 3 (d) 4
30. Choose the correct set of test–result pairs.
A. Fe³⁺ with K₄[Fe(CN)₆]: Prussian blue
B. NH₄⁺ with Nessler's reagent: brown ppt
C. Br⁻ with K₂Cr₂O₇ and conc. H₂SO₄: chromyl chloride vapours
D. Ethanal with I₂ and NaOH: yellow iodoform
(a) A and B only (b) B, C and D only (c) A and C only (d) A, B and D only
Mock Test 2 answer key
| Q | Ans | Reason |
|---|---|---|
| 1 | b | Na reduces the compound to NaCN, Na₂S and NaX |
| 2 | d | Schiff's, nitroprusside, Liebermann's, carbylamine |
| 3 | a | R gives the reason aromatic aldehydes fail Fehling's |
| 4 | c | 0.100 mol × 27 g mol⁻¹ = 2.7 g |
| 5 | b | A, B, D true; Fe is +2 and there are 6 H₂O |
| 6 | b | Clearing is due to coagulation by Al³⁺, not to being a double salt |
| 7 | d | Acetylation, nitration, coupling, haloform |
| 8 | c | 0.0200 mol × 394 × 0.75 = 5.91 g |
| 9 | d | Direct nitration gives oxidation and much meta product; R is true |
| 10 | a | Weak base vs strong acid: jump in acidic range |
| 11 | c | 1.00 mmol MnO₄⁻ × 5/2 = 2.50 mmol oxalic acid ÷ 0.10 M = 25.0 mL |
| 12 | b | HNO₃ is itself an oxidant |
| 13 | a | 5 × 0.020 M × 0.0150 L = 1.5 × 10⁻³ mol |
| 14 | d | 7.5 × 10⁻³ mol × 392 = 2.94 g; 2.94/4.00 = 73.5% |
| 15 | c | KI-starch, layer test, PbSO₄, lime water |
| 16 | b | Dissolving is due to [Ag(NH₃)₂]⁺; colour is not the reason |
| 17 | a | Nitrite reacts with dilute acid and oxidises I⁻ to I₂ |
| 18 | c | A, C, D true; PbS is black; nitrate needs conc. acid |
| 19 | d | I, III, IV, VI |
| 20 | b | Yellow BaCrO₄ and apple-green flame |
| 21 | a | CuS is black |
| 22 | c | ZnS needs high [S²⁻], i.e. ammoniacal medium |
| 23 | d | Group III white gelatinous, amphoteric |
| 24 | a | Al(OH)₃ adsorbs litmus as a blue lake |
| 25 | c | 200 × 4.18 × 1.36 = 1137 J; ÷ 0.0200 mol = 56.8 kJ; exothermic |
| 26 | b | Lyophilic reversible, As₂S₃ negative, dialysis, Hardy–Schulze |
| 27 | d | Rate rises 3 × 2 = 6 times; 90/6 = 15 s |
| 28 | a | Ionisation of a weak acid absorbs heat |
| 29 | c | A, B, D true; As₂S₃ negative; more H₂O₂ means faster, so shorter time |
| 30 | d | Chromyl chloride is given only by chlorides |