Chapter 3: Preparation of Organic Compounds
Four preparations, four reaction types: acetylation (acetanilide), nitration (p-nitroacetanilide), diazotisation and coupling (aniline yellow), and the haloform reaction (iodoform). NEET asks why each condition is chosen, so learn every step with its reason.
What you will learn
How aniline is acetylated to acetanilide and why the product is poured into ice water.
Why aniline is protected before nitration and how the para product is isolated.
How a diazonium salt is made and coupled to give aniline yellow, and why it is kept at 0–5 °C.
The haloform reaction: which compounds give iodoform and the balanced equations.
Yield calculations for single-step and multi-step preparations.
3.1 Acetanilide
Acetanilide is N-phenylethanamide, C₆H₅NHCOCH₃ (M = 135). It is made by acetylating aniline (M = 93): an H on nitrogen is replaced by an acetyl group, CH₃CO–.
Procedure in brief: mix aniline with acetic anhydride and glacial acetic acid. Add a pinch of zinc dust. Warm under reflux for a short time. Pour the hot mixture into ice-cold water with stirring. White crystals of acetanilide separate. Recrystallise from hot water. Melting point is about 114 °C.
| Step | Reason |
|---|---|
| Glacial acetic acid | Solvent; it also moderates the reaction |
| Zinc dust | Reducing agent; stops aniline from being oxidised by air to coloured products |
| Pour into ice water | Acetanilide is poorly soluble in cold water and precipitates; excess anhydride is hydrolysed to acetic acid |
| Recrystallise from hot water | Acetanilide dissolves well in hot water but little in cold water |
Acetyl chloride with pyridine also works. Pyridine is a base that removes the HCl formed and shifts the equilibrium forward.
3.2 p-Nitroacetanilide
Direct nitration of aniline goes badly for two reasons. Nitric acid oxidises the electron-rich ring to tarry products. And in strong acid, –NH₂ becomes –NH₃⁺, which is meta-directing, so a large amount of m-nitroaniline forms. Acetylation solves both problems: –NHCOCH₃ is still ortho/para-directing but less activating, and its bulk blocks the ortho positions.
The electrophile is the nitronium ion:
Procedure in brief: dissolve acetanilide in glacial acetic acid and add conc. H₂SO₄. Cool in ice. Add the nitrating mixture (conc. HNO₃ + conc. H₂SO₄) drop by drop, keeping the temperature below 10 °C. Pour onto crushed ice. Pale yellow p-nitroacetanilide (M = 180) separates. Recrystallise from ethanol. Melting point is about 214 °C.
| Condition | Reason |
|---|---|
| Temperature below 10 °C | Nitration is exothermic; heat would give dinitro products and oxidation |
| Glacial acetic acid | Solvent for acetanilide |
| Pour onto ice | Product is insoluble in cold water |
| Recrystallise from ethanol | The ortho isomer is more soluble in ethanol and stays in the mother liquor; para crystallises out |
Acid or base hydrolysis of p-nitroacetanilide removes the acetyl group and gives p-nitroaniline. This protect–react–deprotect route is a favourite NEET conversion.
3.3 Aniline yellow (p-aminoazobenzene)
Aniline yellow is p-aminoazobenzene, C₆H₅–N=N–C₆H₄–NH₂ (M = 197). It is an azo dye, made in two stages.
Stage 1, diazotisation. Aniline in dilute HCl is cooled to 0–5 °C. Cold NaNO₂ solution is added slowly. Nitrous acid forms in place and converts aniline to benzenediazonium chloride.
Stage 2, coupling. The diazonium salt is added to aniline (dissolved as a solution of aniline in dilute acid, i.e. a weakly acidic medium). The diazonium ion is a weak electrophile. It attacks the para position of the aniline ring.
The product is a yellow solid (m.p. about 125 °C). In practice the diazonium ion first attacks the nitrogen of aniline to give diazoaminobenzene, C₆H₅N=N–NHC₆H₅. Warming this with aniline hydrochloride rearranges it to the para C-coupled dye.
| Condition | Reason |
|---|---|
| 0–5 °C | Above about 5 °C the diazonium salt decomposes: C₆H₅N₂⁺Cl⁻ + H₂O → C₆H₅OH + N₂ + HCl |
| Excess HCl in diazotisation | Generates HNO₂ and keeps free aniline from coupling too early |
| NaNO₂ added slowly | Keeps temperature low; avoids excess HNO₂ |
| Starch-iodide paper | Turns blue when slight excess HNO₂ is present, marking the end of diazotisation |
Why colour? The –N=N– group joins two benzene rings into one long conjugated system. It absorbs blue-violet light, so the compound looks yellow-orange.
3.4 Iodoform (triiodomethane)
Iodoform, CHI₃ (M = 394), forms as yellow crystals with a typical antiseptic smell (m.p. about 119 °C). It is made by warming acetone or ethanol with iodine and NaOH (or KI with sodium hypochlorite). This is the haloform reaction.
How it works with acetone: NaOH + I₂ gives hypoiodite, NaOI. The three H atoms of the CH₃ next to C=O are acidic and are replaced one by one by iodine, giving CH₃COCI₃. OH⁻ then attacks the carbonyl and pushes out CI₃⁻, which takes a proton to give CHI₃. With ethanol, NaOI first oxidises it to acetaldehyde, CH₃CHO, which then reacts the same way. That extra oxidation explains the extra I₂ (4 instead of 3).
Which compounds give the iodoform test? Those with CH₃CO– (a methyl ketone or acetaldehyde) or CH₃CH(OH)– (oxidised to CH₃CO– by NaOI).
| Gives iodoform | Does not give iodoform |
|---|---|
| Ethanol, propan-2-ol, butan-2-ol | Methanol, propan-1-ol |
| Acetaldehyde, acetone, butan-2-one, acetophenone | Formaldehyde, propanal, pentan-3-one, benzophenone |
| 1-Phenylethanol | Benzyl alcohol |
Acetic acid and ethyl acetate have CH₃CO– but do not give the test: the acid forms the acetate ion, and the C=O of acids and esters is not reactive enough.
Procedure in brief: dissolve iodine in acetone (or ethanol), add NaOH solution drop by drop until the brown iodine colour just fades, and warm at about 60–70 °C. Cool. Yellow crystals separate; filter and dry.
3.5 Summary of the four preparations
| Product | From | Reagent | Key condition | Appearance |
|---|---|---|---|---|
| Acetanilide | Aniline | (CH₃CO)₂O, glacial CH₃COOH, Zn dust | Pour into ice water | White shiny flakes, m.p. 114 °C |
| p-Nitroacetanilide | Acetanilide | Conc. HNO₃ + conc. H₂SO₄ | Below 10 °C; recrystallise from ethanol | Pale yellow, m.p. 214 °C |
| Aniline yellow | Aniline (twice) | NaNO₂ + HCl, then aniline | 0–5 °C | Yellow solid |
| Iodoform | Acetone or ethanol | I₂ + NaOH (or KI + NaOCl) | Warm to 60–70 °C | Yellow crystals, antiseptic smell, m.p. 119 °C |
3.6 Worked examples
Worked example 3.1: Why is the acetylation mixture poured into ice-cold water and not into hot water?
Solution: Acetanilide dissolves in hot water but very little in cold water. Ice water makes it precipitate fully. It also hydrolyses leftover acetic anhydride to water-soluble acetic acid.
Worked example 3.2: 4.65 g of aniline (M = 93) gives 5.4 g of acetanilide (M = 135). Find the percentage yield.
Solution: Moles of aniline = 4.65/93 = 0.050 mol. Theoretical acetanilide = 0.050 × 135 = 6.75 g. Yield = 5.4/6.75 × 100 = 80%.
Worked example 3.3: Give two reasons why aniline is acetylated before nitration.
Solution: First, it protects the ring from oxidation by HNO₃. Second, it stops the –NH₂ group from being protonated to meta-directing –NH₃⁺. The bulky –NHCOCH₃ group also favours para over ortho.
Worked example 3.4: 6.75 g of acetanilide is nitrated with a 70% yield. What mass of p-nitroacetanilide (M = 180) is obtained?
Solution: Moles = 6.75/135 = 0.050 mol. Theoretical mass = 0.050 × 180 = 9.0 g. Actual = 0.70 × 9.0 = 6.3 g.
Worked example 3.5: Which of these give the iodoform test: propan-2-ol, propan-1-ol, butan-2-one, pentan-3-one, acetaldehyde, methanol?
Solution: Look for CH₃CO– or CH₃CH(OH)–. Propan-2-ol (CH₃CH(OH)CH₃), butan-2-one (CH₃COC₂H₅) and acetaldehyde (CH₃CHO) give it. Propan-1-ol, pentan-3-one and methanol do not.
Worked example 3.6: How much iodine and iodoform are involved when 1.16 g of acetone (M = 58) reacts completely? (I₂ = 254, CHI₃ = 394)
Solution: Moles of acetone = 1.16/58 = 0.020 mol. Iodine needed = 3 × 0.020 = 0.060 mol = 15.2 g. Iodoform formed = 0.020 mol = 7.88 g.
Worked example 3.7: A student diazotises aniline at 25 °C instead of 0–5 °C. What will he smell and see, and why?
Solution: The diazonium salt decomposes as soon as it forms. Bubbles of N₂ appear, and the smell of phenol (carbolic acid) develops: C₆H₅N₂⁺Cl⁻ + H₂O → C₆H₅OH + N₂ + HCl. Little or no dye forms on coupling.
Worked example 3.8 (NEET-hard): 9.3 g of aniline is acetylated with 90% yield. The acetanilide is nitrated with 60% yield of the para product. Find the mass of p-nitroacetanilide.
Solution: Moles of aniline = 9.3/93 = 0.10 mol. After step 1: 0.10 × 0.90 = 0.090 mol. After step 2: 0.090 × 0.60 = 0.054 mol. Mass = 0.054 × 180 = 9.72 g. Yields of steps multiply.
Quick revision
Acetanilide: aniline + acetic anhydride, glacial acetic acid, zinc dust; pour into ice water; m.p. 114 °C.
Protect –NH₂ by acetylation before nitration; nitrate below 10 °C with HNO₃ + H₂SO₄ (NO₂⁺).
p-Nitroacetanilide separated from ortho by recrystallisation from ethanol.
Diazotisation at 0–5 °C with NaNO₂/HCl; coupling with aniline at para gives aniline yellow (p-aminoazobenzene).
Iodoform: I₂/NaOH with CH₃CO– or CH₃CH(OH)– compounds; yellow, antiseptic smell.
Acetone needs 3I₂ and 4NaOH; ethanol needs 4I₂ and 6NaOH.
Multi-step yield = product of the step yields.
NEET traps
Saying –NH₂ itself is meta-directing. It is o/p-directing; the protonated –NH₃⁺ is meta-directing.
Calling aniline yellow “azobenzene”. It is p-aminoazobenzene; azobenzene has no –NH₂.
Giving the iodoform test to propan-1-ol, pentan-3-one or benzyl alcohol.
Writing acetate as the by-product for ethanol in the iodoform reaction. It is formate (HCOONa).
Forgetting that zinc dust in acetylation prevents oxidation; it is not a catalyst.
Keeping the diazonium salt for later use. It must be used at once, while cold.
Practice MCQs: Chapter 3
Level 1: Concept check
1. Acetanilide is prepared from aniline and (a) acetaldehyde (b) acetone (c) ethanol (d) acetic anhydride
2. The conversion of aniline to acetanilide is an example of (a) nitration (b) acetylation (c) diazotisation (d) reduction
3. The electrophile in the nitration of acetanilide is (a) NO₂⁺ (b) NO₂⁻ (c) NO⁺ (d) NO₃⁻
4. Aniline yellow is (a) azobenzene (b) diazoaminobenzene (c) p-aminoazobenzene (d) p-nitroaniline
5. The colour of iodoform is (a) white (b) yellow (c) violet (d) red
6. Diazotisation of aniline is carried out at (a) 100 °C (b) 50 °C (c) 25 °C (d) 0–5 °C
7. Which alcohol gives the iodoform test? (a) Ethanol (b) Methanol (c) Propan-1-ol (d) Benzyl alcohol
8. The acetylation mixture is poured into ice-cold water to (a) hydrolyse acetanilide (b) dissolve acetanilide (c) precipitate acetanilide (d) oxidise aniline
9. The major product of nitration of acetanilide is (a) p-nitroacetanilide (b) m-nitroacetanilide (c) 2,4,6-trinitroacetanilide (d) nitrobenzene
10. The formula of iodoform is (a) CH₂I₂ (b) CHI₃ (c) CI₄ (d) CH₃I
Level 2: NEET standard
11. Aniline is acetylated before nitration mainly to (a) make the ring more reactive (b) make the group meta-directing (c) protect –NH₂ from oxidation and moderate its activating effect (d) make it soluble in water
12. During nitration of acetanilide the temperature is kept (a) above 100 °C (b) near 60 °C (c) near 40 °C (d) below 10 °C
13. The ortho isomer is removed from crude p-nitroacetanilide by (a) steam distillation of the para isomer (b) recrystallisation from ethanol, in which the ortho isomer is more soluble (c) sublimation (d) washing with cold water
14. If a diazonium salt solution warms above 5 °C, it gives (a) phenol and N₂ (b) aniline (c) benzene (d) chlorobenzene
15. Which does NOT give the iodoform test? (a) Acetone (b) Acetaldehyde (c) Butan-2-one (d) Pentan-3-one
16. Theoretical mass of acetanilide (M = 135) from 1.86 g of aniline (M = 93) is (a) 1.35 g (b) 5.40 g (c) 2.70 g (d) 1.86 g
17. Moles of NaOH used per mole of acetone in CH₃COCH₃ + I₂ + NaOH → CHI₃ + … (balanced) are (a) 3 (b) 4 (c) 6 (d) 1
18. In aniline yellow, the azo group is joined to the aminophenyl ring at the (a) para position (b) ortho position (c) meta position (d) nitrogen atom
19. When ethanol gives iodoform with I₂/NaOH, the other organic product is (a) CH₃COONa (b) CH₃CHO only (c) CH₃OH (d) HCOONa
20. In the preparation of p-nitroacetanilide, glacial acetic acid acts as (a) the nitrating agent (b) an oxidant (c) the solvent for acetanilide (d) a catalyst for diazotisation
21. 0.050 mol of acetone gives 15.76 g of iodoform (M = 394). The percentage yield is (a) 80% (b) 75% (c) 85% (d) 70%
22. Acid hydrolysis of p-nitroacetanilide gives (a) aniline (b) p-nitroaniline (c) p-nitrophenol (d) nitrobenzene
Level 3: Challenge
23. Direct nitration of aniline gives a large amount of the meta product because (a) –NH₂ is meta-directing (b) the ortho positions are blocked (c) NO₂⁺ attacks nitrogen (d) –NH₂ is protonated to –NH₃⁺, which is meta-directing
24. 9.3 g of aniline (M = 93) is acetylated with 80% yield, and the product nitrated with 50% yield of the para isomer (M = 180). The mass of p-nitroacetanilide is (a) 9.0 g (b) 14.4 g (c) 7.2 g (d) 3.6 g
25. A compound C₄H₈O gives the iodoform test and a 2,4-DNP precipitate but not Tollens' test. It is (a) butan-2-one (b) butanal (c) 2-methylpropanal (d) but-3-en-2-ol
26. The mass of iodine (I₂ = 254) needed in theory to convert 2.3 g of ethanol (M = 46) fully to iodoform is (a) 38.1 g (b) 50.8 g (c) 25.4 g (d) 12.7 g
27. Zinc dust is added while preparing acetanilide in order to (a) catalyse acetylation (b) reduce acetic anhydride (c) absorb water (d) prevent oxidation of aniline
28. 0.015 mol of benzenediazonium chloride couples completely with aniline. The theoretical mass of aniline yellow (M = 197) is (a) 1.97 g (b) 3.94 g (c) 2.96 g (d) 1.48 g
29. Assertion (A): Acetanilide is less reactive than aniline towards electrophilic substitution. Reason (R): Acetanilide is a white crystalline solid. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: Aniline yellow is made by coupling benzenediazonium chloride with aniline. Statement II: Benzenediazonium chloride is stable at room temperature for several days. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | d | Acetic anhydride supplies the acetyl group |
| 2 | b | CH₃CO– replaces H on N |
| 3 | a | Nitronium ion from HNO₃ + H₂SO₄ |
| 4 | c | C₆H₅N=NC₆H₄NH₂ (para) |
| 5 | b | CHI₃ is a yellow solid |
| 6 | d | Diazonium salts decompose above 5 °C |
| 7 | a | CH₃CH₂OH has CH₃CH(OH)– pattern |
| 8 | c | Poorly soluble in cold water |
| 9 | a | Bulky o/p director favours para |
| 10 | b | Triiodomethane |
| 11 | c | Protection plus moderated activation |
| 12 | d | Avoids polynitration and oxidation |
| 13 | b | Ortho isomer stays in ethanol mother liquor |
| 14 | a | Ar–N₂⁺ + H₂O → ArOH + N₂ + H⁺ |
| 15 | d | C₂H₅COC₂H₅ has no CH₃CO– |
| 16 | c | 0.020 mol × 135 = 2.70 g |
| 17 | b | CH₃COCH₃ + 3I₂ + 4NaOH |
| 18 | a | Coupling occurs para to –NH₂ |
| 19 | d | Ethanol → CH₃CHO → CHI₃ + HCOO⁻ |
| 20 | c | Dissolves acetanilide |
| 21 | a | 15.76/(0.050 × 394) = 80% |
| 22 | b | Removes acetyl, keeps NO₂ |
| 23 | d | Anilinium ion is meta-directing |
| 24 | c | 0.10 × 0.80 × 0.50 × 180 = 7.2 g |
| 25 | a | CH₃COC₂H₅: ketone with CH₃CO– |
| 26 | b | 0.050 × 4 × 254 = 50.8 g |
| 27 | d | Zn is a reducing agent |
| 28 | c | 0.015 × 197 = 2.96 g |
| 29 | b | Both true; R does not explain lower reactivity |
| 30 | c | Diazonium salts must be used cold and at once |
Chapter 3 revision sheet
One-page summary
Acetanilide: aniline + acetic anhydride (glacial acetic acid as solvent, a pinch of zinc dust), then pour into ice-cold water; white crystals, m.p. 114 °C.
Zinc dust stops aniline from being oxidised (aniline turns brown in air).
Acetylation makes –NHCOCH₃ less activating than –NH₂ (the N lone pair is shared with C=O), protects it from oxidation and stops anilinium ion formation.
p-Nitroacetanilide: acetanilide in glacial acetic acid + conc. H₂SO₄, nitrating mixture added below 10 °C; electrophile NO₂⁺.
Para is the major product (ortho is crowded); the ortho isomer is more soluble in ethanol and stays in solution on recrystallisation.
Direct nitration of aniline fails: oxidation (tar) plus a large meta fraction, because the anilinium ion formed in acid is meta-directing.
Diazotisation: aniline + NaNO₂ + HCl at 0–5 °C → benzenediazonium chloride. Above about 5 °C it breaks down to phenol and N₂.
Aniline yellow (p-aminoazobenzene): diazonium salt coupled with aniline at the para position in weakly acidic medium; an azo (–N=N–) dye.
Iodoform: acetone or ethanol warmed with I₂ and NaOH; yellow crystals with an antiseptic smell (m.p. about 119 °C).
Positive iodoform: CH₃CO– or CH₃CH(OH)– joined to H or C. Ethanol is the only primary alcohol that gives it; methanol, propan-1-ol and acetic acid do not.
% yield = actual ÷ theoretical × 100; multi-step yield = product of the step yields.
Must-remember table
| Product | Starting material | Key reagent | Condition | Appearance | M (g mol⁻¹) |
|---|---|---|---|---|---|
| Acetanilide | Aniline (93) | (CH₃CO)₂O, Zn dust | Warm, pour into ice water | White, m.p. 114 °C | 135 |
| p-Nitroacetanilide | Acetanilide | Conc. HNO₃ + conc. H₂SO₄ | Below 10 °C | Pale yellow | 180 |
| Benzenediazonium chloride | Aniline | NaNO₂ + HCl | 0–5 °C | Used in solution | – |
| Aniline yellow | Diazonium salt + aniline | Weak acid | Cold | Yellow azo dye | 197 |
| Iodoform | Acetone (58) or ethanol (46) | I₂ + NaOH | Warm | Yellow, antiseptic smell | 394 |
Memory aids
"Protect, Nitrate, Para": acetylate first, nitrate cold, collect the para product.
"Diazo stays alive below five": diazotisation and coupling at 0–5 °C.
"Acetone 3-4, Ethanol 4-6": moles of I₂ and NaOH per mole of CHI₃. Ethanol needs one extra I₂ to first oxidise it to ethanal.
"Zinc keeps aniline Zen": zinc dust stops aniline turning brown.
Concept connections
Activating and directing effects of –NH₂ and –NHCOCH₃ come from Chemistry Book 14: Some Basic Principles of Organic Chemistry.
Diazonium salts, coupling and acetylation are covered in Chemistry Book 18: Organic Compounds Containing Nitrogen.
The haloform reaction links to Chemistry Book 17: Organic Compounds Containing Oxygen, and the yield sums to Chemistry Book 1: Some Basic Concepts in Chemistry.
Practice MCQs: Chapter 3, Level 4 (new NEET pattern)
31. Match List I (product) with List II (key reagent).
List I:
A. Acetanilide
B. p-Nitroacetanilide
C. Benzenediazonium chloride
D. Iodoform
List II:
(i) I₂ + NaOH
(ii) NaNO₂ + HCl at 0–5 °C
(iii) Acetic anhydride
(iv) Conc. HNO₃ + conc. H₂SO₄
(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-ii, C-iv, D-i (c) A-i, B-iv, C-ii, D-iii (d) A-iii, B-iv, C-ii, D-i
32. Match List I (reagent or step) with List II (its role).
List I:
A. Zinc dust in acetanilide preparation
B. Conc. H₂SO₄ in nitration
C. Ice bath in diazotisation
D. Recrystallising crude p-nitroacetanilide from ethanol
List II:
(i) Generates NO₂⁺
(ii) Removes the more soluble ortho isomer
(iii) Keeps the diazonium salt from decomposing
(iv) Prevents oxidation of aniline
(a) A-i, B-iv, C-iii, D-ii (b) A-iv, B-i, C-iii, D-ii (c) A-iv, B-i, C-ii, D-iii (d) A-iii, B-i, C-iv, D-ii
33. Match List I (compound) with List II (description).
List I:
A. Acetanilide
B. p-Nitroacetanilide
C. Aniline yellow
D. Iodoform
List II:
(i) Yellow solid with an antiseptic smell
(ii) Colourless crystals, m.p. 114 °C
(iii) Azo compound containing –N=N–
(iv) Pale yellow, the major isomer of a nitration
(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iii, C-iv, D-i (c) A-ii, B-iv, C-iii, D-i (d) A-i, B-iv, C-iii, D-ii
34. Match List I (compound) with List II (molar mass in g mol⁻¹).
List I:
A. Acetanilide
B. p-Nitroacetanilide
C. Aniline yellow
D. Iodoform
List II:
(i) 197
(ii) 394
(iii) 135
(iv) 180
(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-i, C-iv, D-ii
35. How many of the following statements are correct?
A. –NHCOCH₃ is less activating than –NH₂.
B. Direct nitration of aniline gives much meta product because the anilinium ion forms.
C. –NHCOCH₃ is a meta-directing group.
D. Nitration of acetanilide is kept below 10 °C to limit dinitration and oxidation.
(a) 1 (b) 2 (c) 3 (d) 4
36. Choose the correct set of statements about aniline yellow.
A. Nitrous acid for diazotisation is made in the flask from NaNO₂ and HCl.
B. Coupling with aniline happens mainly at the ortho position.
C. Aniline yellow is p-aminoazobenzene.
D. Warming the diazonium solution to 50 °C gives phenol and N₂.
(a) A and C only (b) A, C and D only (c) B and D only (d) A, B, C and D
37. How many of these give a positive iodoform test? Ethanol, methanol, propan-2-ol, propan-1-ol, acetone, acetophenone, acetic acid, ethanal. (a) 3 (b) 4 (c) 5 (d) 6
38. Choose the correct set of statements about iodoform preparation.
A. Acetone needs 3 mol of I₂ per mole of CHI₃.
B. Ethanol needs 4 mol of I₂ per mole of CHI₃.
C. The by-product from acetone is sodium formate.
D. The by-product from ethanol is sodium formate.
(a) A, B and D only (b) A and C only (c) B and C only (d) A, B, C and D
39. A student's notebook records these conditions. Which record is wrong?
| Step | Condition recorded |
|---|---|
| P: Diazotisation of aniline | 0–5 °C |
| Q: Nitration of acetanilide | Below 10 °C |
| R: Acetanilide preparation | Warmed, then poured into ice-cold water |
| S: Coupling to give aniline yellow | 40–50 °C |
(a) P (b) Q (c) R (d) S
40. 4.65 g of aniline is converted to acetanilide with 90% yield, and the acetanilide is nitrated to p-nitroacetanilide with 50% yield. Mass of p-nitroacetanilide obtained is: (a) 4.05 g (b) 8.10 g (c) 3.24 g (d) 6.08 g
41. A plot of the theoretical mass of iodoform (y-axis) against the mass of acetone used (x-axis), with excess I₂ and NaOH, is a straight line through the origin. Its slope is about: (a) 0.147 (b) 6.79 (c) 3.40 (d) 13.6
Passage for Q42–43: A student nitrates 2.70 g of acetanilide and gets 2.88 g of crude p-nitroacetanilide. The crude solid melts over a wide range, below the expected value.
42. The percentage yield (crude) is: (a) 64% (b) 72% (c) 90% (d) 80%
43. The low, broad melting range and the right fix are: (a) unreacted aniline; wash with NaOH (b) the ortho isomer as impurity; recrystallise from ethanol (c) water of crystallisation; heat strongly (d) the meta isomer as major product; repeat at 60 °C
44. Coupling of benzenediazonium chloride with aniline is done in weakly acidic, not strongly acidic, medium because: (a) in strong acid aniline becomes C₆H₅NH₃⁺, which is deactivated and does not couple (b) the diazonium ion is stable only in strong acid (c) strong acid makes aniline a better nucleophile (d) the coupling needs a high concentration of OH⁻ ions
45. Minimum mass of I₂ needed to convert 2.30 g of ethanol completely to iodoform is: (a) 38.1 g (b) 25.4 g (c) 50.8 g (d) 76.2 g
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | d | Acetylation, nitration, diazotisation, haloform |
| 32 | b | Zn antioxidant, H₂SO₄ makes NO₂⁺, cold keeps diazonium, ethanol removes ortho |
| 33 | c | Colourless acetanilide, pale yellow para-nitro, azo dye, yellow CHI₃ |
| 34 | a | 135, 180, 197, 394 |
| 35 | c | A, B, D true; –NHCOCH₃ is ortho/para-directing |
| 36 | b | Coupling is at para, so B is false |
| 37 | c | Ethanol, propan-2-ol, acetone, acetophenone, ethanal |
| 38 | a | Acetone gives sodium acetate, not formate |
| 39 | d | Coupling must be cold; warm diazonium salt decomposes |
| 40 | a | 0.0500 × 0.90 × 0.50 × 180 = 4.05 g |
| 41 | b | 1 mol acetone (58 g) gives 1 mol CHI₃ (394 g); 394/58 = 6.79 |
| 42 | d | 2.70/135 = 0.0200 mol; theoretical 3.60 g; 2.88/3.60 = 80% |
| 43 | b | Ortho isomer lowers and broadens m.p.; it stays in ethanol |
| 44 | a | Anilinium ion has no free lone pair to activate the ring |
| 45 | c | 0.0500 mol ethanol × 4 × 254 = 50.8 g |