Chapter 3 of 11 · 24 min read

Chapter 1: Detection of Elements and Functional Groups

An organic compound is held together by covalent bonds, so it gives no ions in water and ordinary ionic tests fail. The whole trick of this chapter: first convert N, S and halogens into ions, then run simple ionic tests on them.

What you will learn

  • How sodium fusion (Lassaigne's test) converts N, S and halogens into ions.

  • The colour tests for nitrogen, sulphur and halogens, and why each step is done.

  • Tests for alcoholic and phenolic –OH groups.

  • Tests that tell aldehydes from ketones.

  • Tests for –COOH and –NH₂ groups, including the carbylamine and azo dye tests.

1.1 Lassaigne's test: making ions from a covalent compound

A pea-sized piece of sodium is heated with the compound in a fusion tube. Sodium is a strong reducing agent. At red heat it pulls N, S and halogens out of the molecule and locks them into ionic sodium salts.

Na+C+N→ΔNaCN\mathrm{Na + C + N \xrightarrow{\Delta} NaCN}
2Na+S→ΔNa2SNa+X→ΔNaX (X=Cl,Br,I)\mathrm{2Na + S \xrightarrow{\Delta} Na_2S \qquad Na + X \xrightarrow{\Delta} NaX\ (X = Cl, Br, I)}
Na+C+N+S→ΔNaSCN\mathrm{Na + C + N + S \xrightarrow{\Delta} NaSCN}

The red-hot tube is plunged into distilled water so it shatters. The mixture is boiled and filtered. The clear filtrate is the sodium fusion extract (SFE). It is alkaline because extra sodium forms NaOH with water.

Why sodium and not another metal? Sodium salts of CN⁻, S²⁻ and X⁻ all dissolve in water, and sodium reacts fast enough at red heat.

1.2 Test for nitrogen

Boil the SFE with freshly prepared FeSO₄ solution. Then acidify with dilute H₂SO₄. A Prussian blue colour or precipitate shows nitrogen.

The chemistry runs in three steps:

  1. Fe²⁺ + 6CN⁻ → [Fe(CN)₆]⁴⁻ (hexacyanidoferrate(II))

  2. On boiling in air, some Fe²⁺ is oxidised to Fe³⁺. Acid dissolves the green Fe(OH)₂ and Fe(OH)₃ that formed in the alkaline extract.

  3. 3[Fe(CN)₆]⁴⁻ + 4Fe³⁺ → Fe₄[Fe(CN)₆]₃·xH₂O (Prussian blue, iron(III) hexacyanidoferrate(II))

6CN−+Fe2+→[Fe(CN)6]4−\mathrm{6CN^- + Fe^{2+} \rightarrow [Fe(CN)_6]^{4-}}
3[Fe(CN)6]4−+4Fe3+→xH2OFe4[Fe(CN)6]3⋅xH2O\mathrm{3[Fe(CN)_6]^{4-} + 4Fe^{3+} \xrightarrow{xH_2O} Fe_4[Fe(CN)_6]_3 \cdot xH_2O}

If the compound has both N and S, the extract may contain SCN⁻ instead of CN⁻. Then no Prussian blue forms. Instead, Fe³⁺ gives a blood-red colour: Fe³⁺ + SCN⁻ → [Fe(SCN)]²⁺. This happens when sodium is used in too small an amount. With excess sodium, NaSCN breaks to NaCN and Na₂S, and both tests work separately.

Two cases fail this test even though nitrogen is present. Hydrazine (NH₂NH₂) has N but no carbon, so no CN⁻ can form. Diazonium salts lose nitrogen as N₂ gas on heating, before sodium can capture it.

1.3 Test for sulphur

Two tests are used on the SFE.

  1. Lead acetate test: acidify with acetic acid and add lead acetate. A black precipitate of PbS shows sulphur. S²⁻ + Pb²⁺ → PbS (black).

  2. Sodium nitroprusside test: add sodium nitroprusside to the alkaline SFE. A violet (purple) colour shows sulphur. S²⁻ + [Fe(CN)₅NO]²⁻ → [Fe(CN)₅NOS]⁴⁻ (violet).

1.4 Test for halogens

Acidify the SFE with dilute HNO₃ and add AgNO₃ solution.

Precipitate colourBehaviour with NH₄OHHalogen
White (AgCl)Dissolves easilyChlorine
Pale yellow (AgBr)Dissolves slowly or partlyBromine
Yellow (AgI)Does not dissolveIodine

Why boil with HNO₃ first? If N or S is present, CN⁻ and S²⁻ would also react with Ag⁺. AgCN is white and Ag₂S is black, so they would confuse the test. Boiling with nitric acid drives them off as HCN and H₂S gas.

Why HNO₃ and not HCl or H₂SO₄? HCl adds Cl⁻, giving a false positive. H₂SO₄ could precipitate silver sulphate from a concentrated solution. HNO₃ brings in nitrate, which forms no precipitate with Ag⁺.

Fluorine is not detected by AgNO₃ because AgF dissolves in water.

Beilstein test (quick check): a clean copper wire with the compound on it gives a green flame if a halogen is present, from volatile copper halides. Urea and thiourea also give a green flame, so this test is not conclusive.

1.5 Hydroxyl group: alcohols

Alcohols are neutral to litmus. They are detected by these tests.

  1. Sodium metal test: a dry alcohol gives brisk bubbles of H₂. 2R–OH + 2Na → 2R–ONa + H₂↑. The liquid must be dry, since water also reacts with Na.

  2. Ceric ammonium nitrate (CAN) test: the yellow CAN solution turns pink or red. The alcohol replaces a nitrate ligand: (NH₄)₂[Ce(NO₃)₆] + ROH → (NH₄)₂[Ce(NO₃)₅(OR)] (red) + HNO₃.

  3. Ester test: warm with acetic acid and a drop of conc. H₂SO₄. A fruity smell of the ester shows –OH.

  4. Iodoform test (only for CH₃CH(OH)– alcohols such as ethanol and propan-2-ol): yellow CHI₃ with I₂ and NaOH. Details in Chapter 3.

1.6 Hydroxyl group: phenols

Phenol is a weak acid (pKa about 10). It turns blue litmus faintly red but does not release CO₂ from NaHCO₃. That single fact separates phenols from carboxylic acids.

  1. Neutral FeCl₃ test: a violet colour (some phenols give blue, green or red). The colour comes from an iron(III) phenoxide complex: 6C₆H₅OH + Fe³⁺ → [Fe(OC₆H₅)₆]³⁻ + 6H⁺. The FeCl₃ must be neutral; acid would suppress the phenoxide.

  2. Bromine water test: the orange colour vanishes and a white precipitate of 2,4,6-tribromophenol forms. C₆H₅OH + 3Br₂ → C₆H₂Br₃OH↓ + 3HBr.

  3. Liebermann's nitroso test: phenol with NaNO₂ and conc. H₂SO₄ gives a deep green or blue colour. On dilution with water it turns red. Adding NaOH brings back the blue.

  4. Phthalein dye test: heat phenol with phthalic anhydride and conc. H₂SO₄. Pour into dilute NaOH. A pink colour of phenolphthalein appears.

  5. CAN test: phenols give a green to brown precipitate, not the red colour of alcohols.

1.7 Carbonyl group: aldehydes and ketones

Step one is the common test. 2,4-Dinitrophenylhydrazine (2,4-DNP, Brady's reagent) gives a yellow, orange or red precipitate of the 2,4-dinitrophenylhydrazone with any aldehyde or ketone. This is a condensation reaction: C=O + H₂N–NH–Ar → C=N–NH–Ar + H₂O.

Step two separates them. Aldehydes have an H on the carbonyl carbon, so they are easily oxidised. Ketones are not.

TestReagentAldehydeKetoneChemistry
Schiff's testSchiff's reagent (magenta decolourised by SO₂)Pink/magenta colour returnsNo colourAldehyde adds to the reagent and restores the dye
Tollens' test[Ag(NH₃)₂]⁺ in NH₃Silver mirror or grey-black pptNo changeRCHO + 2[Ag(NH₃)₂]⁺ + 3OH⁻ → RCOO⁻ + 2Ag + 4NH₃ + 2H₂O
Fehling's testFehling's A (CuSO₄) + B (alkaline sodium potassium tartrate)Red-brown ppt of Cu₂O (aliphatic aldehydes)No changeRCHO + 2Cu²⁺ + 5OH⁻ → RCOO⁻ + Cu₂O + 3H₂O
Sodium nitroprusside testSodium nitroprusside + NaOHNo red colourRed colour (ketones with α-H, e.g. acetone)Carbanion of ketone forms a coloured complex
m-Dinitrobenzene testm-Dinitrobenzene + NaOHNo violet colourViolet colour (e.g. acetone)Coloured adduct with active methylene

Benzaldehyde gives Tollens' test but not Fehling's test. Aromatic aldehydes are weaker reducing agents. Fehling's is therefore a good test to tell aliphatic from aromatic aldehydes.

1.8 Carboxyl group

  1. Litmus test: blue litmus turns red.

  2. Sodium hydrogencarbonate test: brisk effervescence of CO₂, which turns lime water milky. RCOOH + NaHCO₃ → RCOONa + H₂O + CO₂↑.

  3. Ester test: warm with ethanol and conc. H₂SO₄. A fruity smell appears.

The bicarbonate test is the key one. Carboxylic acids (pKa about 4–5) are stronger than H₂CO₃ (pKa about 6.4), so they push CO₂ out. Phenol (pKa about 10) is weaker, so it cannot. Phenols with strong electron-withdrawing groups, such as picric acid (2,4,6-trinitrophenol), are an exception: they do liberate CO₂.

1.9 Amino group

Amines are basic. They turn red litmus blue and dissolve in dilute HCl as ammonium salts.

  1. Carbylamine (isocyanide) test, for primary amines only (aliphatic and aromatic): warm with CHCl₃ and alcoholic KOH. An offensive smell of isocyanide shows a 1° amine. RNH₂ + CHCl₃ + 3KOH → RNC + 3KCl + 3H₂O. Secondary and tertiary amines do not respond.

  2. Azo dye test, for aromatic primary amines: dissolve in dil. HCl, cool to 0–5 °C, add cold NaNO₂ solution. Pour the diazonium salt into alkaline β-naphthol. An orange-red dye forms. Aliphatic 1° amines give unstable diazonium salts that lose N₂, so no dye forms.

  3. Hinsberg test (to classify): benzenesulphonyl chloride gives a 1° amine product soluble in KOH, a 2° amine product insoluble in KOH, and no reaction with a 3° amine.

1.10 Summary table of functional group tests

GroupReagentObservationInferenceChemistry in one line
Alcoholic –OHCAN solutionYellow → pink/redAlcohol presentAlkoxide replaces nitrate on Ce(IV)
Alcoholic –OHNa metal (dry)H₂ bubblesActive H present2ROH + 2Na → 2RONa + H₂
Phenolic –OHNeutral FeCl₃Violet colourPhenolIron(III) phenoxide complex
Phenolic –OHBromine waterWhite pptPhenol2,4,6-Tribromophenol forms
Phenolic –OHNaNO₂ + conc. H₂SO₄Green/blue → red on dilution → blue with NaOHPhenolLiebermann's nitroso reaction
C=O (both)2,4-DNPYellow/orange pptAldehyde or ketoneHydrazone formation
–CHOTollens' reagentSilver mirrorAldehydeAg⁺ reduced to Ag
–CHOFehling's solutionRed pptAliphatic aldehydeCu²⁺ reduced to Cu₂O
–CHOSchiff's reagentPink colourAldehydeDye colour restored
>C=O ketoneSodium nitroprusside + NaOHRed colourKetoneCarbanion complex
–COOHNaHCO₃Brisk effervescenceCarboxylic acidCO₂ released
–NH₂ (1°)CHCl₃ + alc. KOHFoul smellPrimary amineIsocyanide formed
Ar–NH₂NaNO₂/HCl at 0–5 °C, then β-naphtholOrange-red dyeAromatic 1° amineDiazotisation and coupling

A good order in an unknown: NaHCO₃ first (acid?), then FeCl₃ (phenol?), then 2,4-DNP (carbonyl?), then Tollens' (aldehyde?), then CAN (alcohol?), and the carbylamine test for amines. Figure 1.1 shows this as a decision path.

Figure 1.1 · Decision path for identifying a functional group
Figure 1.1 · Decision path for identifying a functional group

Read down the left column: the first test that gives “yes” sends you right to the group present; a compound with several groups is tested at every step.

1.11 Worked examples

Worked example 1.1: A student adds AgNO₃ directly to the sodium fusion extract of thiourea, NH₂CSNH₂, and sees a dark precipitate. Explain, and fix the procedure.

Solution: Thiourea contains S. The extract holds S²⁻, which gives black Ag₂S with Ag⁺. It may also hold CN⁻, giving white AgCN. Neither means a halogen is present. Boiling the extract with HNO₃ first drives off H₂S and HCN. Only then is AgNO₃ added.

Worked example 1.2: An aromatic compound C₇H₆O gives a silver mirror with Tollens' reagent but no red precipitate with Fehling's solution. Name it.

Solution: C₇H₆O with a benzene ring leaves one C, one O and one H: a –CHO group. Tollens' positive confirms an aldehyde. Aromatic aldehydes fail Fehling's test. The compound is benzaldehyde, C₆H₅CHO.

Worked example 1.3: The fusion extract of a compound gives no Prussian blue with FeSO₄/H₂SO₄. It gives a blood-red colour with FeCl₃. What elements are present, and how can the test be improved?

Solution: Blood red is [Fe(SCN)]²⁺, so SCN⁻ was formed. Both N and S are present. Too little sodium was used. Fusing with excess sodium splits NaSCN into NaCN and Na₂S: NaSCN + 2Na → NaCN + Na₂S. Then Prussian blue and the nitroprusside test both work.

Worked example 1.4: Three isomers of C₇H₈O are given: o-cresol, benzyl alcohol and anisole. Pick two reagents that identify all three.

Solution: Neutral FeCl₃ gives violet only with o-cresol, a phenol. Of the other two, sodium metal gives H₂ with benzyl alcohol (C₆H₅CH₂OH). Anisole (C₆H₅OCH₃) is an ether with no O–H and gives neither test.

Worked example 1.5: Compound X (C₃H₆O) gives an orange precipitate with 2,4-DNP. It does not reduce Tollens' reagent but gives a yellow precipitate with I₂ and NaOH. Identify X.

Solution: 2,4-DNP positive means C=O. Tollens' negative means not an aldehyde, so X is a ketone. Three carbons with a ketone gives only CH₃COCH₃. The iodoform test confirms the CH₃CO– group. X is acetone.

Worked example 1.6: A white solid gives brisk effervescence with NaHCO₃ and a violet colour with neutral FeCl₃. Suggest a structure.

Solution: Effervescence shows –COOH. Violet with FeCl₃ shows a phenolic –OH. A benzene ring with both groups fits salicylic acid, o-HOC₆H₄COOH.

Worked example 1.7 (NEET-hard): Three amines have formula C₇H₉N: P gives both the carbylamine and the azo dye test; Q gives the carbylamine test but no azo dye; R gives neither and forms a KOH-insoluble Hinsberg product. Identify P, Q, R.

Solution: P is an aromatic primary amine with –NH₂ on the ring: a toluidine such as p-CH₃C₆H₄NH₂. Q is primary but the –NH₂ is on a side-chain carbon, so its diazonium salt is unstable: benzylamine, C₆H₅CH₂NH₂. R is secondary (KOH-insoluble Hinsberg product, no carbylamine): N-methylaniline, C₆H₅NHCH₃.

Quick revision

  • Lassaigne's test converts N → NaCN, S → Na₂S, X → NaX, N + S → NaSCN.

  • N: Prussian blue, Fe₄[Fe(CN)₆]₃. N + S together: blood red [Fe(SCN)]²⁺.

  • S: black PbS with lead acetate; violet with sodium nitroprusside.

  • Halogens: AgCl white (soluble in NH₃), AgBr pale yellow (partly soluble), AgI yellow (insoluble). Boil with HNO₃ first.

  • Alcohol: CAN red; phenol: FeCl₃ violet, Br₂ water white ppt, Liebermann's test.

  • C=O: 2,4-DNP. Aldehyde: Tollens', Fehling's (aliphatic only), Schiff's. Ketone: sodium nitroprusside red.

  • –COOH: NaHCO₃ effervescence. 1° amine: carbylamine. Aromatic 1° amine: azo dye with β-naphthol.

NEET traps

  • Thinking hydrazine gives Prussian blue. It has no carbon, so no CN⁻ forms.

  • Using HCl to acidify the extract before AgNO₃. It adds Cl⁻ and gives a false result; HNO₃ is used.

  • Saying benzaldehyde gives Fehling's test. It gives Tollens' only.

  • Treating phenol as a carboxylic acid. Ordinary phenols do not release CO₂ from NaHCO₃; picric acid does.

  • Giving the azo dye test to benzylamine or ethylamine. Only amines with –NH₂ directly on the ring form a stable diazonium salt.

  • Forgetting that the carbylamine test is for primary amines only, aliphatic or aromatic.

Practice MCQs: Chapter 1

Level 1: Concept check

1. In Lassaigne's test the organic compound is fused with (a) calcium (b) sodium (c) K₂Cr₂O₇ (d) zinc dust

2. The formula of Prussian blue is (a) Fe₃[Fe(CN)₆]₂ (b) K₄[Fe(CN)₆] (c) Fe[Fe(CN)₆] (d) Fe₄[Fe(CN)₆]₃

3. A violet colour on adding sodium nitroprusside to the sodium fusion extract shows (a) sulphur (b) nitrogen (c) chlorine (d) phosphorus

4. A yellow precipitate with AgNO₃ that does not dissolve in NH₄OH shows (a) chlorine (b) bromine (c) iodine (d) fluorine

5. Which reagent gives a red colour with alcohols? (a) Neutral FeCl₃ (b) Tollens' reagent (c) Ceric ammonium nitrate (d) 2,4-DNP

6. Neutral FeCl₃ gives a violet colour with (a) phenol (b) ethanol (c) acetic acid (d) acetone

7. 2,4-Dinitrophenylhydrazine gives a coloured precipitate with (a) only aldehydes (b) only ketones (c) only carboxylic acids (d) both aldehydes and ketones

8. Brisk effervescence when a carboxylic acid meets NaHCO₃ is due to (a) H₂ (b) CO₂ (c) O₂ (d) SO₂

9. The carbylamine test is given by (a) primary amines (b) secondary amines (c) tertiary amines (d) all amines

10. The mirror in Tollens' test is made of (a) Ag₂O (b) AgNO₃ (c) Ag₂S (d) metallic silver

Level 2: NEET standard

11. A blood-red colour with FeCl₃ in the sodium fusion extract shows (a) only nitrogen (b) only sulphur (c) both nitrogen and sulphur (d) a halogen

12. The fusion extract is boiled with HNO₃ before adding AgNO₃ in order to (a) increase the solubility of AgCl (b) decompose NaCN and Na₂S (c) oxidise the halide to free halogen (d) remove sodium ions

13. Which compound does NOT show nitrogen in Lassaigne's test? (a) Urea (b) Aniline (c) Acetamide (d) Hydrazine

14. Benzaldehyde and acetaldehyde are best distinguished by (a) Fehling's solution (b) Tollens' reagent (c) 2,4-DNP (d) Schiff's reagent

15. Phenol and benzoic acid can be distinguished by (a) sodium metal (b) NaHCO₃ solution (c) NaOH solution (d) 2,4-DNP

16. An isomer of C₇H₈O gives no colour with neutral FeCl₃ but liberates H₂ with sodium. It is (a) o-cresol (b) anisole (c) benzyl alcohol (d) p-cresol

17. Liebermann's nitroso test is a test for (a) phenols (b) primary amines (c) ketones (d) carboxylic acids

18. Which amine gives an orange-red dye with NaNO₂/HCl at 0–5 °C followed by alkaline β-naphthol? (a) Ethylamine (b) Benzylamine (c) N-Methylaniline (d) Aniline

19. Phenol with excess bromine water gives (a) o-bromophenol only (b) p-bromophenol only (c) a white precipitate of 2,4,6-tribromophenol (d) bromobenzene

20. Acetone gives a red colour with (a) Tollens' reagent (b) sodium nitroprusside and NaOH (c) Fehling's solution (d) Schiff's reagent

21. A pale yellow precipitate with AgNO₃, partly soluble in NH₄OH, shows (a) bromine (b) chlorine (c) iodine (d) sulphur

22. In the lead acetate test for sulphur, the extract is first acidified with (a) HNO₃ (b) HCl (c) H₂SO₄ (d) acetic acid

Level 3: Challenge

23. A compound C₃H₆O gives an orange precipitate with 2,4-DNP and a silver mirror with Tollens' reagent. It is (a) acetone (b) allyl alcohol (c) propanal (d) methyl vinyl ether

24. A compound C₈H₁₀O gives a red colour with CAN, a yellow precipitate with I₂/NaOH and no colour with FeCl₃. It is (a) 2-phenylethanol (b) 1-phenylethanol (c) 2,4-dimethylphenol (d) ethyl phenyl ether

25. Which pair can NOT be distinguished by NaHCO₃ solution? (a) Phenol and acetic acid (b) Phenol and benzoic acid (c) Ethanol and formic acid (d) Picric acid and benzoic acid

26. Thiourea is fused with too little sodium. The extract gives a red colour with FeCl₃. The ion responsible is (a) SCN⁻ (b) CN⁻ (c) S²⁻ (d) NO₂⁻

27. An amine C₇H₉N gives the carbylamine test but not the azo dye test. It is (a) p-toluidine (b) N-methylaniline (c) benzylamine (d) o-toluidine

28. Which statement about Fehling's test is correct? (a) Fehling's solution B contains CuSO₄ (b) The red precipitate is Cu₂O, and benzaldehyde does not give it (c) Ketones give a red precipitate (d) The oxidising species is Cu⁺

29. Assertion (A): Phenol does not liberate CO₂ from NaHCO₃ solution. Reason (R): Phenol is a weaker acid than carbonic acid. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Hydrazine gives Prussian blue in Lassaigne's test. Statement II: Fluorine in an organic compound cannot be detected by the AgNO₃ test because AgF is soluble in water. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bSodium metal converts N, S, X into ionic salts
2dIron(III) hexacyanidoferrate(II)
3aS²⁻ forms violet [Fe(CN)₅NOS]⁴⁻
4cAgI is yellow and insoluble in ammonia
5cCe(IV) alkoxide complex is red
6aIron(III) phenoxide complex is violet
7dAny C=O forms a 2,4-DNP hydrazone
8bRCOOH + NaHCO₃ → CO₂
9aOnly 1° amines form isocyanides
10dAg⁺ is reduced to Ag metal
11cBlood red [Fe(SCN)]²⁺ needs both N and S
12bRemoves CN⁻ and S²⁻ as HCN and H₂S
13dNo carbon, so no CN⁻ forms
14aOnly aliphatic aldehydes reduce Fehling's
15bBenzoic acid releases CO₂; phenol does not
16cAlcohol (Na positive) but not a phenol
17aPhenol + HNO₂ + H₂SO₄ colour test
18dAromatic 1° amine forms stable diazonium salt
19c–OH activates all o and p positions
20bKetone carbanion gives red with nitroprusside
21aAgBr is pale yellow, partly soluble in NH₃
22dHCl or H₂SO₄ would give PbCl₂ or PbSO₄ precipitates
23cAldehyde with 3 C is CH₃CH₂CHO
24bC₆H₅CH(OH)CH₃ has CH₃CH(OH)– unit
25dPicric acid and benzoic acid both release CO₂
26aNaSCN forms with little sodium
27c–NH₂ on side chain gives unstable diazonium ion
28bFehling's B is alkaline tartrate; aromatic aldehydes fail
29aWeaker acid cannot displace a stronger one
30dHydrazine has no C; AgF is soluble

Chapter 1 revision sheet

One-page summary

  • Lassaigne's test: fuse the compound with sodium metal so covalent N, S and X become ionic NaCN, Na₂S, NaX (and NaSCN if N and S are both present and sodium is short).

  • With excess sodium, NaSCN breaks down: NaSCN + 2Na → NaCN + Na₂S.

  • Nitrogen: boil extract with FeSO₄, acidify with conc. H₂SO₄ → Prussian blue, Fe₄[Fe(CN)₆]₃.

  • Nitrogen + sulphur together: FeCl₃ gives blood-red [Fe(SCN)]²⁺; no Prussian blue (no free CN⁻).

  • Sulphur: black PbS with lead acetate (acetic acid medium); violet colour with sodium nitroprusside.

  • Halogens: boil extract with dil. HNO₃ to remove CN⁻ and S²⁻, then AgNO₃. AgCl white, AgBr pale yellow, AgI yellow.

  • Hydrazine (N₂H₄) has N but no carbon, so no CN⁻ and no Prussian blue. AgF is soluble, so F is not found by AgNO₃.

  • Alcoholic –OH: red colour with ceric ammonium nitrate; H₂ with sodium metal.

  • Phenolic –OH: violet with neutral FeCl₃; white 2,4,6-tribromophenol with bromine water; Liebermann's nitroso test.

  • Carbonyl group: yellow-orange 2,4-DNP derivative with aldehydes and ketones.

  • Aldehydes: silver mirror (Tollens'), red Cu₂O (Fehling's, aliphatic only), pink colour (Schiff's). Ketones: red colour with sodium nitroprusside in NaOH.

  • –COOH: brisk effervescence of CO₂ with NaHCO₃ (phenol does not do this).

  • Primary amines (aliphatic and aromatic): carbylamine test, foul isocyanide smell. Aromatic primary amines only: diazotise at 0–5 °C, couple with alkaline β-naphthol → orange-red dye.

Must-remember table

TargetReagentPositive result
NFeSO₄, then conc. H₂SO₄Prussian blue
N + SFeCl₃Blood red
SLead acetate / sodium nitroprussideBlack ppt / violet
Cl, Br, IHNO₃ then AgNO₃White / pale yellow / yellow ppt
AlcoholCeric ammonium nitrateRed colour
PhenolNeutral FeCl₃Violet colour
C=O2,4-DNPYellow-orange ppt
AldehydeTollens' / Fehling's / Schiff'sMirror / red ppt / pink
KetoneSodium nitroprusside + NaOHRed colour
–COOHNaHCO₃Effervescence (CO₂)
1° amineCHCl₃ + alc. KOHFoul smell (isocyanide)
Ar–NH₂NaNO₂/HCl, then β-naphtholOrange-red dye

Memory aids

  • "Blue for One, Blood for Both": Prussian blue when N is alone, blood red when N and S are both present.

  • "Wet Paper Yellows" for silver halides going down the group: White (Cl), Pale yellow (Br), Yellow (I); solubility in NH₃ falls in the same order.

  • "Kill CN, then call Silver": boil with HNO₃ before adding AgNO₃.

  • "TFS find the aldehyde": Tollens', Fehling's, Schiff's.

  • "CAN finds alcohol, FeCl₃ finds phenol": ceric ammonium nitrate turns red with alcohols, neutral FeCl₃ turns violet with phenols.

Concept connections

  • The full Lassaigne method and the quantitative estimation of elements are in Chemistry Book 13: Purification and Characterisation of Organic Compounds.

  • Why the functional-group tests work is explained in Chemistry Book 17: Organic Compounds Containing Oxygen and Chemistry Book 18: Organic Compounds Containing Nitrogen.

  • Prussian blue, [Fe(SCN)]²⁺ and nitroprusside are complexes, covered in Chemistry Book 12: Coordination Compounds.

Practice MCQs: Chapter 1, Level 4 (new NEET pattern)

31. Match List I (element present in the organic compound) with List II (observation with Lassaigne's extract).

List I:

  • A. Nitrogen only

  • B. Sulphur only

  • C. Nitrogen and sulphur together (little sodium)

  • D. Iodine

List II:

  • (i) Blood-red colour with FeCl₃

  • (ii) Yellow ppt with AgNO₃, insoluble in NH₃

  • (iii) Prussian blue colour

  • (iv) Violet colour with sodium nitroprusside

(a) A-iii, B-iv, C-ii, D-i (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-i, B-iv, C-iii, D-ii

32. Match List I (reagent) with List II (group it detects).

List I:

  • A. Ceric ammonium nitrate

  • B. Neutral FeCl₃

  • C. NaHCO₃ solution

  • D. NaNO₂/HCl at 0–5 °C, then alkaline β-naphthol

List II:

  • (i) Phenolic –OH

  • (ii) –COOH

  • (iii) Aromatic primary amine

  • (iv) Alcoholic –OH

(a) A-iv, B-i, C-iii, D-ii (b) A-i, B-iv, C-ii, D-iii (c) A-iv, B-ii, C-i, D-iii (d) A-iv, B-i, C-ii, D-iii

33. Match List I (test) with List II (positive result).

List I:

  • A. Tollens' test

  • B. Fehling's test

  • C. Schiff's test

  • D. Carbylamine test

List II:

  • (i) Red precipitate

  • (ii) Offensive smell

  • (iii) Silver mirror

  • (iv) Pink colour

(a) A-iii, B-i, C-iv, D-ii (b) A-i, B-iii, C-iv, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-ii, B-i, C-iv, D-iii

34. Match List I (compound) with List II (test it passes).

List I:

  • A. Benzaldehyde

  • B. Propanone

  • C. Benzoic acid

  • D. Phenol

List II:

  • (i) White ppt with bromine water

  • (ii) Silver mirror with Tollens' reagent

  • (iii) Brisk effervescence with NaHCO₃

  • (iv) Red colour with sodium nitroprusside and NaOH

(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-iii, C-iv, D-i (d) A-i, B-iv, C-iii, D-ii

35. How many of the following statements are correct?

  • A. Lassaigne's extract is made by fusing the compound with sodium metal.

  • B. Hydrazine gives Prussian blue in Lassaigne's test.

  • C. When N and S are both present and sodium is in excess, NaCN and Na₂S form instead of NaSCN.

  • D. The extract is boiled with dilute HNO₃ before the AgNO₃ test to remove CN⁻ and S²⁻.

  • E. Prussian blue is Fe₄[Fe(CN)₆]₃.

(a) 2 (b) 3 (c) 4 (d) 5

36. Choose the correct set of statements.

  • A. Phenol gives a violet colour with neutral FeCl₃.

  • B. Benzaldehyde gives a red precipitate with Fehling's solution.

  • C. Ketones give a silver mirror with Tollens' reagent.

  • D. 2,4-DNP gives a yellow-orange precipitate with both aldehydes and ketones.

(a) A and D only (b) A, B and D only (c) B and C only (d) A, C and D only

37. How many of the following statements about amines are correct?

  • A. Both aliphatic and aromatic primary amines give the carbylamine test.

  • B. Secondary amines give the carbylamine test.

  • C. Aliphatic primary amines give a stable orange dye with β-naphthol after diazotisation.

  • D. Diazotisation is carried out at 0–5 °C.

(a) 1 (b) 2 (c) 3 (d) 4

38. Choose the correct set of statements about halogen detection.

  • A. AgCl dissolves in dilute aqueous ammonia, forming [Ag(NH₃)₂]⁺.

  • B. AgI dissolves readily in dilute aqueous ammonia.

  • C. Beilstein's test is not conclusive, because some halogen-free compounds such as urea also give a green flame.

  • D. Fluorine is detected by a precipitate of AgF.

(a) A and B only (b) C and D only (c) A, C and D only (d) A and C only

39. Four compounds P, Q, R and S gave these results. S gave a yellow-orange precipitate with 2,4-DNP.

CompoundNaHCO₃Neutral FeCl₃Tollens' reagent
PEffervescenceNo violet colourNo mirror
QNo changeVioletNo mirror
RNo changeNo violet colourSilver mirror
SNo changeNo violet colourNo mirror

P, Q, R and S are: (a) phenol, benzoic acid, acetophenone, benzaldehyde (b) benzoic acid, benzaldehyde, phenol, acetophenone (c) benzoic acid, phenol, benzaldehyde, acetophenone (d) acetophenone, phenol, benzaldehyde, benzoic acid

40. The Lassaigne's extract of compound X gave these results.

TestObservation
FeSO₄, then conc. H₂SO₄Prussian blue
Lead acetate in acetic acidNo black ppt
Boiled with HNO₃, then AgNO₃White ppt, dissolves in NH₃

X contains: (a) N and Cl only (b) N and S only (c) S and Cl only (d) N, S and Cl

41. A compound C₄H₈O gives a yellow-orange precipitate with 2,4-DNP and a yellow precipitate with I₂/NaOH, but no silver mirror with Tollens' reagent. The compound is: (a) butanal (b) butan-1-ol (c) 2-methylpropanal (d) butan-2-one

Passage for Q42–43: A student gets a liquid of formula C₇H₉N. Warming it with CHCl₃ and alcoholic KOH gives a foul smell. Treated with NaNO₂ and HCl at 0–5 °C and then alkaline β-naphthol, it gives an orange-red dye. Its Lassaigne's extract gives Prussian blue.

42. The compound is most likely: (a) benzylamine (b) p-toluidine (c) N-methylaniline (d) N,N-dimethylaniline

43. Which isomer of C₇H₉N gives the carbylamine test but not the azo dye test? (a) p-toluidine (b) N-methylaniline (c) o-toluidine (d) benzylamine

44. Which compound gives a violet colour with neutral FeCl₃ and also brisk effervescence with NaHCO₃? (a) 2-Hydroxybenzoic acid (b) Phenol (c) Benzoic acid (d) Benzyl alcohol

45. Which compound gives both a positive iodoform test and a silver mirror with Tollens' reagent? (a) Propanone (b) Methanal (c) Ethanal (d) Propanal

Level 4 answer key

QAnsReason
31cN → Prussian blue, S → violet, N + S → blood red, I → yellow AgI
32dCAN alcohol, FeCl₃ phenol, NaHCO₃ acid, azo dye aromatic amine
33aMirror, red Cu₂O, pink, isocyanide smell
34bAldehyde mirror, methyl ketone red, acid CO₂, phenol tribromophenol
35cA, C, D, E true; hydrazine has no carbon, so no CN⁻
36aAromatic aldehydes fail Fehling's; ketones fail Tollens'
37bA and D true; 2° amines fail; aliphatic diazonium salts decompose
38dAgI does not dissolve in NH₃; AgF is soluble, so no ppt
39cAcid fizzes, phenol violet, aldehyde mirror, ketone only DNP
40aPrussian blue = N, no PbS = no S, white soluble ppt = Cl
41dKetone (DNP, no Tollens') with CH₃CO– group = CH₃COCH₂CH₃
42b1° aromatic amine with C₇H₉N = a toluidine
43dC₆H₅CH₂NH₂ is 1° but NH₂ is not on the ring, so no stable diazonium
44aSalicylic acid has both phenolic –OH and –COOH
45cCH₃CHO has CH₃CO– and is an aldehyde
24 min left
‹
›