Chapter 2: Preparation of Inorganic Compounds
Both compounds in this chapter are double salts made by the same idea: dissolve two simple salts in the right mole ratio, stop hydrolysis with a little acid, concentrate, and let crystals grow slowly. Think of it like making rock sugar (mishri) from a thick sugar syrup: patience during cooling gives bigger crystals.
What you will learn
What a double salt is and how it differs from a complex salt.
How to prepare Mohr's salt and why dilute H₂SO₄ is added.
How to prepare potash alum and what an alum is in general.
What crystallisation point means and how to find it.
How to calculate reactant masses, theoretical yield and percentage yield.
2.1 Double salts and complex salts
A double salt forms when two simple salts crystallise together in a fixed ratio. In water it breaks fully into its simple ions. A complex salt keeps a complex ion intact in water.
| Feature | Double salt | Complex salt |
|---|---|---|
| Example | Mohr's salt, potash alum | K₄[Fe(CN)₆] |
| Exists in | Solid state only | Solid and solution |
| Ions in water | All simple ions (Fe²⁺, NH₄⁺, SO₄²⁻) | K⁺ and [Fe(CN)₆]⁴⁻, no free Fe²⁺ |
| Tests | Gives tests of every constituent ion | Does not give tests of the central metal ion |
2.2 Crystallisation: the common method
Dissolve the solids in the minimum amount of warm water.
Filter off any insoluble impurity.
Heat gently to concentrate the solution to its crystallisation point.
Test the point: dip a glass rod, take it out and blow on it. A thin crust of crystals on the rod means the point is reached.
Cool slowly and undisturbed. Slow cooling gives large, well-formed crystals. Fast cooling gives small ones.
Decant the mother liquor, wash the crystals with a little cold water, and dry them between filter paper.
2.3 Mohr's salt: ferrous ammonium sulphate
Formula: FeSO₄·(NH₄)₂SO₄·6H₂O, also written (NH₄)₂Fe(SO₄)₂·6H₂O. Its IUPAC-style name is ammonium iron(II) sulphate hexahydrate. Molar mass is 392 g mol⁻¹.
Procedure in brief: take equimolar amounts of ferrous sulphate heptahydrate (278 g mol⁻¹) and ammonium sulphate (132 g mol⁻¹). Dissolve them in a little warm water containing 2–3 mL of dilute H₂SO₄. Concentrate, cool slowly, and collect light green monoclinic crystals.
Key conditions and the reason for each:
| Condition | Reason |
|---|---|
| Dilute H₂SO₄ added | Fe²⁺ hydrolyses in water and gives turbid basic salts. Acid pushes the hydrolysis equilibrium back (common H⁺ ion) |
| Gentle heating, no long boiling | Long heating oxidises Fe²⁺ to Fe³⁺ by air; the solution turns yellow-brown |
| H₂SO₄ and not HCl or HNO₃ | HNO₃ oxidises Fe²⁺; HCl adds a foreign anion. H₂SO₄ adds only sulphate, already present |
| Equimolar amounts | The salt has a 1 : 1 ratio; excess of one salt crystallises as impurity |
| Slow cooling | Large pure crystals |
FeSO₄ hydrolysis: Fe²⁺ + 2H₂O ⇌ Fe(OH)₂ + 2H⁺. Adding H⁺ shifts it left.
Why is Mohr's salt used as a primary standard in titrations (Chapter 4) instead of FeSO₄·7H₂O? Plain ferrous sulphate slowly oxidises in air and loses water (effloresces), so its mass is unreliable. Mohr's salt is more stable in air and has a fixed composition.
2.4 Potash alum
Formula: K₂SO₄·Al₂(SO₄)₃·24H₂O, often written KAl(SO₄)₂·12H₂O. Molar mass of the doubled formula is 948 g mol⁻¹ (474 for the single formula). Its name is potassium aluminium sulphate dodecahydrate.
Procedure in brief: dissolve equimolar K₂SO₄ (174 g mol⁻¹) and Al₂(SO₄)₃·18H₂O (666 g mol⁻¹) in warm water with a few drops of dilute H₂SO₄. Concentrate, cool slowly, and collect colourless, transparent octahedral crystals.
Why acid here? Al³⁺ is small and highly charged, so it hydrolyses strongly: Al³⁺ + 3H₂O ⇌ Al(OH)₃ + 3H⁺. Without acid the solution turns milky with Al(OH)₃.
2.5 Alums in general
General formula: M′₂SO₄·M‴₂(SO₄)₃·24H₂O, or M′M‴(SO₄)₂·12H₂O.
M′ (monovalent): Na⁺, K⁺, Rb⁺, Cs⁺, NH₄⁺. Li⁺ does not form alums; it is too small.
M‴ (trivalent): Al³⁺, Cr³⁺, Fe³⁺ and a few others.
In the crystal, each metal ion is surrounded by six water molecules: [M′(H₂O)₆]⁺ and [M‴(H₂O)₆]³⁺.
All alums have the same crystal form (they are isomorphous) and give octahedral crystals.
| Alum | Formula (single unit) | Colour |
|---|---|---|
| Potash alum | KAl(SO₄)₂·12H₂O | Colourless |
| Ammonium alum | NH₄Al(SO₄)₂·12H₂O | Colourless |
| Chrome alum | KCr(SO₄)₂·12H₂O | Deep violet |
| Ferric alum | NH₄Fe(SO₄)₂·12H₂O | Pale violet |
Uses of potash alum: purifying muddy water (the Al³⁺ ion neutralises and coagulates the negatively charged clay particles), as a styptic to stop bleeding after a shave, and as a mordant in dyeing. Barbers in India still rub a block of phitkari on small cuts; that is potash alum.
2.6 Yield calculations
Rounded molar masses used in this chapter: FeSO₄·7H₂O 278, (NH₄)₂SO₄ 132, Mohr's salt 392, K₂SO₄ 174, Al₂(SO₄)₃·18H₂O 666, potash alum (24H₂O form) 948 g mol⁻¹.
2.7 Worked examples
Worked example 2.1: Name the ions you will detect in a solution of Mohr's salt. How many ions does one formula unit give?
Solution: FeSO₄·(NH₄)₂SO₄ → Fe²⁺ + 2NH₄⁺ + 2SO₄²⁻. That is 5 ions per formula unit. All three ions give their usual tests because it is a double salt.
Worked example 2.2: How much ammonium sulphate is needed for 7.0 g of FeSO₄·7H₂O?
Solution: Moles of FeSO₄·7H₂O = 7.0/278 = 0.0252 mol. Equal moles of (NH₄)₂SO₄ are needed: 0.0252 × 132 = 3.3 g.
Worked example 2.3: From the mixture in example 2.2, a student gets 8.4 g of Mohr's salt. Find the percentage yield.
Solution: Theoretical mass = 0.02518 × 392 = 9.87 g. Percentage yield = 8.4/9.87 × 100 = 85.1%.
Worked example 2.4: A student boils the ferrous sulphate solution for 20 minutes without acid. The solution turns yellow-brown and turbid. Explain both changes.
Solution: Yellow-brown: air oxidises Fe²⁺ to Fe³⁺ during long heating. Turbidity: without acid, Fe²⁺ and Fe³⁺ hydrolyse to insoluble basic salts and hydroxides. Dilute H₂SO₄ and gentle heating avoid both.
Worked example 2.5: Find the percentage of water of crystallisation and of aluminium in potash alum (M = 948 g mol⁻¹).
Solution: Water: 24 × 18 = 432 g. 432/948 × 100 = 45.6%. Aluminium: 2 × 27 = 54 g. 54/948 × 100 = 5.70%.
Worked example 2.6: What mass of Al₂(SO₄)₃·18H₂O must be mixed with 5.0 g K₂SO₄, and what is the theoretical yield of alum?
Solution: Moles of K₂SO₄ = 5.0/174 = 0.0287 mol. Mass of aluminium sulphate = 0.0287 × 666 = 19.1 g. Theoretical alum = 0.0287 × 948 = 27.2 g.
Worked example 2.7 (NEET-hard): 4.74 g of KAl(SO₄)₂·12H₂O is dissolved in water and excess BaCl₂ is added. What mass of BaSO₄ (M = 233) precipitates? How many moles of ions did the alum release?
Solution: Moles of alum = 4.74/474 = 0.0100 mol. Each unit has 2 SO₄²⁻, so 0.0200 mol BaSO₄ forms: 0.0200 × 233 = 4.66 g. Each unit gives K⁺ + Al³⁺ + 2SO₄²⁻ = 4 ions, so 0.0400 mol of ions.
Quick revision
Mohr's salt: FeSO₄·(NH₄)₂SO₄·6H₂O, light green, monoclinic, M = 392.
Potash alum: K₂SO₄·Al₂(SO₄)₃·24H₂O, colourless, octahedral, M = 948.
Both are double salts made from equimolar simple salts.
Dilute H₂SO₄ stops hydrolysis of Fe²⁺ and Al³⁺.
Avoid long heating of Fe²⁺ solutions (oxidation to Fe³⁺).
Crystallisation point: glass rod test. Slow cooling gives big crystals.
Alums: M′M‴(SO₄)₂·12H₂O; Li⁺ cannot be M′.
NEET traps
Writing 7H₂O for Mohr's salt. FeSO₄·7H₂O is green vitriol; Mohr's salt has 6H₂O.
Calling Mohr's salt a complex. It is a double salt and gives free Fe²⁺ in water.
Thinking the acid oxidises or reduces anything. It only suppresses hydrolysis.
Mixing 12H₂O and 24H₂O formulas in yield problems. Check which molar mass (474 or 948) matches the formula used.
Believing alum kills germs. It coagulates mud; disinfection needs chlorine or boiling.
Practice MCQs: Chapter 2
Level 1: Concept check
1. The formula of Mohr's salt is (a) FeSO₄·7H₂O (b) Fe₂(SO₄)₃·(NH₄)₂SO₄·24H₂O (c) FeSO₄·(NH₄)₂SO₄·6H₂O (d) (NH₄)₂Fe(SO₄)₂·12H₂O
2. The formula of potash alum is (a) K₂SO₄·Al₂(SO₄)₃·24H₂O (b) KAl(SO₄)₂·6H₂O (c) K₂SO₄·Al₂(SO₄)₃·18H₂O (d) Al₂(SO₄)₃·18H₂O
3. Mohr's salt is an example of a (a) complex salt (b) normal salt (c) acid salt (d) double salt
4. The colour of Mohr's salt crystals is (a) colourless (b) light green (c) blue (d) yellow
5. A few mL of dilute H₂SO₄ is added while preparing Mohr's salt to (a) prevent hydrolysis of FeSO₄ (b) oxidise Fe²⁺ (c) raise the pH (d) act as an indicator
6. Crystals of potash alum are (a) monoclinic needles (b) cubic (c) octahedral (d) hexagonal plates
7. In K₂SO₄·Al₂(SO₄)₃·xH₂O, x is (a) 12 (b) 24 (c) 18 (d) 6
8. Long boiling of the Mohr's salt solution is avoided because (a) crystals redissolve (b) only NH₃ is lost (c) the solution freezes (d) Fe²⁺ is oxidised to Fe³⁺
9. The crystallisation point is found by (a) adding an indicator (b) measuring pH (c) dipping a glass rod and looking for a thin crust on it (d) adding alcohol
10. Potash alum clears muddy water because (a) Al³⁺ coagulates negatively charged clay particles (b) it oxidises germs (c) it softens water (d) it adds K⁺
Level 2: NEET standard
11. Which ion can NOT act as the monovalent ion in an alum? (a) Na⁺ (b) K⁺ (c) NH₄⁺ (d) Li⁺
12. An aqueous solution of Mohr's salt gives tests for (a) Fe²⁺ only (b) Fe²⁺, NH₄⁺ and SO₄²⁻ (c) the complex ion [Fe(SO₄)₂]²⁻ (d) Fe³⁺ only
13. Mass of (NH₄)₂SO₄ (M = 132) needed for 13.9 g of FeSO₄·7H₂O (M = 278) is (a) 6.6 g (b) 13.2 g (c) 3.3 g (d) 9.9 g
14. Percentage of water of crystallisation in Mohr's salt (M = 392) is about (a) 18.4% (b) 45.6% (c) 27.6% (d) 31.8%
15. Slow cooling of a saturated solution gives (a) small crystals (b) an amorphous powder (c) no crystals (d) large, well-formed crystals
16. Mohr's salt is preferred over FeSO₄·7H₂O as a primary standard because it (a) is more soluble (b) is less easily oxidised by air and does not effloresce (c) contains Fe³⁺ (d) is cheaper
17. The number of ions given by one formula unit of K₂SO₄·Al₂(SO₄)₃·24H₂O in water is (a) 4 (b) 6 (c) 8 (d) 10
18. The formula of ferric alum (ammonium iron(III) sulphate) is (a) NH₄Fe(SO₄)₂·12H₂O (b) (NH₄)₂Fe(SO₄)₂·6H₂O (c) NH₄Fe(SO₄)₂·6H₂O (d) Fe₂(SO₄)₃·9H₂O
19. A potash alum solution made without acid turns milky. The cause is (a) precipitation of K₂SO₄ (b) oxidation of aluminium (c) loss of water (d) hydrolysis of Al³⁺ to Al(OH)₃
20. The oxidation state of iron in Mohr's salt is (a) +3 (b) +2 (c) +6 (d) 0
21. Theoretical yield of potash alum (M = 948) from 8.7 g K₂SO₄ (M = 174) is (a) 23.7 g (b) 94.8 g (c) 47.4 g (d) 33.3 g
22. 0.030 mol of FeSO₄·7H₂O gives 9.8 g of Mohr's salt (M = 392). The percentage yield is (a) 83.3% (b) 75.0% (c) 90.0% (d) 70.4%
Level 3: Challenge
23. Mass of aluminium in 94.8 g of K₂SO₄·Al₂(SO₄)₃·24H₂O (M = 948, Al = 27) is (a) 2.7 g (b) 5.4 g (c) 10.8 g (d) 1.35 g
24. Mass percentage of iron in Mohr's salt (Fe = 56, M = 392) is (a) 20.1% (b) 28.6% (c) 7.1% (d) 14.3%
25. A student starts with a yellowish-brown, old sample of ferrous sulphate. The most likely result is (a) crystals contaminated with Fe³⁺, with a yellow tint (b) a higher yield (c) colourless crystals (d) a white precipitate of BaSO₄
26. 0.10 mol of Mohr's salt is dissolved in water. Ignoring hydrolysis, the total moles of ions in solution are (a) 0.30 (b) 0.40 (c) 0.50 (d) 0.20
27. Which statement is INCORRECT? (a) Alums are isomorphous (b) In alum crystals Al³⁺ is present as [Al(H₂O)₆]³⁺ (c) Chrome alum contains Cr³⁺ (d) Mohr's salt contains the complex ion [Fe(SO₄)₂]²⁻ in water
28. For 2.78 g of FeSO₄·7H₂O (M = 278), the correct mass of (NH₄)₂SO₄ (M = 132) is (a) 2.64 g (b) 1.32 g (c) 0.66 g (d) 3.92 g
29. Assertion (A): A little dilute H₂SO₄ is added while preparing potash alum. Reason (R): H₂SO₄ oxidises Al³⁺ and so prevents turbidity. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: Mohr's salt and potash alum are both double salts. Statement II: A double salt gives the tests of all its constituent ions in solution. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | c | Ferrous ammonium sulphate hexahydrate |
| 2 | a | Alum carries 24 water molecules per K₂SO₄·Al₂(SO₄)₃ |
| 3 | d | Two simple salts crystallised together |
| 4 | b | Hydrated Fe²⁺ is pale green |
| 5 | a | H⁺ suppresses Fe²⁺ hydrolysis |
| 6 | c | All alums form octahedra |
| 7 | b | 24H₂O in the doubled formula |
| 8 | d | Air oxidises Fe²⁺ on long heating |
| 9 | c | Crust on a cooled glass rod shows saturation |
| 10 | a | Highly charged Al³⁺ coagulates the sol |
| 11 | d | Li⁺ is too small |
| 12 | b | Double salt ionises fully |
| 13 | a | 0.050 mol × 132 = 6.6 g |
| 14 | c | 108/392 × 100 = 27.6% |
| 15 | d | Few nuclei grow slowly into big crystals |
| 16 | b | Stable composition in air |
| 17 | c | 2K⁺ + 2Al³⁺ + 4SO₄²⁻ |
| 18 | a | Fe³⁺ alum with NH₄⁺, 12H₂O |
| 19 | d | Al³⁺ + 3H₂O ⇌ Al(OH)₃ + 3H⁺ |
| 20 | b | Ferrous means Fe(II) |
| 21 | c | 0.050 mol × 948 = 47.4 g |
| 22 | a | 9.8/(0.030 × 392) = 83.3% |
| 23 | b | 0.10 mol × 2 × 27 = 5.4 g |
| 24 | d | 56/392 × 100 = 14.3% |
| 25 | a | Fe³⁺ impurity colours the crystals |
| 26 | c | 5 ions per unit × 0.10 mol |
| 27 | d | Double salt gives free Fe²⁺, no complex |
| 28 | b | 0.010 mol × 132 = 1.32 g |
| 29 | c | Acid suppresses hydrolysis; it does not oxidise Al³⁺ |
| 30 | a | II is the defining property in I |
Chapter 2 revision sheet
One-page summary
A double salt exists only in the crystal. In water it splits fully into simple ions, unlike a complex such as K₄[Fe(CN)₆].
Mohr's salt: FeSO₄·(NH₄)₂SO₄·6H₂O, light green, monoclinic, M = 392 g mol⁻¹, iron in +2 state.
Made from equimolar FeSO₄·7H₂O (278) and (NH₄)₂SO₄ (132) in the least volume of warm water with a little dil. H₂SO₄.
Dilute H₂SO₄ stops hydrolysis of Fe²⁺ (and Al³⁺ for alum); without it the liquid turns turbid.
Do not boil Fe²⁺ solutions for long: air oxidises Fe²⁺ to Fe³⁺ and the liquid turns yellowish.
Potash alum: K₂SO₄·Al₂(SO₄)₃·24H₂O (M = 948), or KAl(SO₄)₂·12H₂O (M = 474); colourless octahedral crystals.
Made from equimolar K₂SO₄ (174) and Al₂(SO₄)₃·18H₂O (666) with a little dil. H₂SO₄.
Crystallisation point: a glass rod dipped in the hot liquid and blown on shows a thin crust of crystals.
Slow, undisturbed cooling gives large, well-shaped crystals; fast cooling gives many tiny ones.
Dry crystals by pressing between filter papers, not by strong heating (water of crystallisation would be lost).
Alums: M′M‴(SO₄)₂·12H₂O with M′ = Na⁺, K⁺, Rb⁺, Cs⁺, NH₄⁺ and M‴ = Al³⁺, Cr³⁺, Fe³⁺. Li⁺ is too small. All alums are isomorphous.
Water content: Mohr's salt 108/392 = 27.6%; potash alum 432/948 = 45.6%.
% yield = (actual mass ÷ theoretical mass) × 100.
Uses: Mohr's salt as a primary standard for KMnO₄; alum for water purification (coagulation), as a styptic and as a mordant in dyeing.
Must-remember table
| Property | Mohr's salt | Potash alum |
|---|---|---|
| Formula | FeSO₄·(NH₄)₂SO₄·6H₂O | K₂SO₄·Al₂(SO₄)₃·24H₂O |
| Molar mass (g mol⁻¹) | 392 | 948 (474 per KAl(SO₄)₂·12H₂O) |
| Starting salts (1:1 mol) | FeSO₄·7H₂O (278) + (NH₄)₂SO₄ (132) | K₂SO₄ (174) + Al₂(SO₄)₃·18H₂O (666) |
| Colour, shape | Light green, monoclinic | Colourless, octahedral |
| Oxidation state of metal | Fe +2 | Al +3 |
| Water of crystallisation | 6 (27.6%) | 24 (45.6%) |
| Ions in water | Fe²⁺, NH₄⁺, SO₄²⁻ | K⁺, Al³⁺, SO₄²⁻ |
Memory aids
"Green Six, Clear Twenty-four": green Mohr's salt carries 6 H₂O; colourless potash alum carries 24 H₂O.
"392 and 948, learn them straight": the two molar masses that solve almost every Chapter 2 sum.
"SASH": Sulphuric Acid Stops Hydrolysis.
"No Kids Run Crying Near Lithium": Na⁺, K⁺, Rb⁺, Cs⁺, NH₄⁺ form alums; Li⁺ does not.
Concept connections
Mole ratio and % yield calculations come from Chemistry Book 1: Some Basic Concepts in Chemistry.
Double salt vs complex is explained in Chemistry Book 12: Coordination Compounds; Fe²⁺/Fe³⁺ chemistry is in Chemistry Book 11: d- and f-Block Elements.
Hydrolysis of metal ions and its suppression by acid link to Chemistry Book 6: Equilibrium.
Practice MCQs: Chapter 2, Level 4 (new NEET pattern)
31. Match List I (substance) with List II (property).
List I:
A. Mohr's salt
B. Potash alum
C. FeSO₄·7H₂O
D. (NH₄)₂SO₄
List II:
(i) Molar mass 132 g mol⁻¹
(ii) Colourless octahedral crystals
(iii) Light green crystals used as a primary standard
(iv) Green vitriol, slowly oxidised in air
(a) A-ii, B-iii, C-iv, D-i (b) A-iii, B-ii, C-iv, D-i (c) A-iii, B-ii, C-i, D-iv (d) A-iv, B-ii, C-iii, D-i
32. Match List I (step in preparation) with List II (reason).
List I:
A. Adding a little dilute H₂SO₄
B. Avoiding long boiling of the Mohr's salt solution
C. Slow cooling without disturbing
D. Glass rod test
List II:
(i) To get large, well-shaped crystals
(ii) To find the crystallisation point
(iii) To suppress hydrolysis of metal ions
(iv) To prevent oxidation of Fe²⁺ to Fe³⁺
(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-ii, D-i (c) A-i, B-iv, C-iii, D-ii (d) A-iii, B-iv, C-i, D-ii
33. Match List I with List II (numbers).
List I:
A. Water molecules in one formula unit of Mohr's salt
B. Water molecules in K₂SO₄·Al₂(SO₄)₃·xH₂O
C. Sulphate ions in one formula unit of Mohr's salt
D. Total ions (not counting water) from one formula unit of K₂SO₄·Al₂(SO₄)₃·24H₂O in water
List II:
(i) 24
(ii) 6
(iii) 8
(iv) 2
(a) A-ii, B-i, C-iv, D-iii (b) A-ii, B-i, C-iii, D-iv (c) A-i, B-ii, C-iv, D-iii (d) A-iv, B-i, C-ii, D-iii
34. Match List I (alum) with List II (formula).
List I:
A. Potash alum
B. Ammonium alum
C. Chrome alum
D. Ferric ammonium alum
List II:
(i) NH₄Fe(SO₄)₂·12H₂O
(ii) KCr(SO₄)₂·12H₂O
(iii) KAl(SO₄)₂·12H₂O
(iv) NH₄Al(SO₄)₂·12H₂O
(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-iv, C-i, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-ii, B-iv, C-iii, D-i
35. How many of the following statements are correct?
A. Mohr's salt and potash alum are both double salts.
B. An aqueous solution of Mohr's salt gives tests for Fe²⁺, NH₄⁺ and SO₄²⁻.
C. Potash alum crystals are light green.
D. Iron is in the +3 state in Mohr's salt.
E. Alum solution is acidic because Al³⁺ hydrolyses.
(a) 1 (b) 2 (c) 3 (d) 4
36. Choose the correct set of statements.
A. FeSO₄·7H₂O and (NH₄)₂SO₄ are taken in a 1:1 mole ratio.
B. K₂SO₄ and Al₂(SO₄)₃·18H₂O are taken in a 1:2 mole ratio.
C. Concentrated HNO₃ is added to prevent hydrolysis.
D. Crystals are dried between filter papers, not by strong heating.
(a) A and D only (b) A, B and D only (c) B and C only (d) A, C and D only
37. How many of the following statements about alums are correct?
A. Their general formula is M′M‴(SO₄)₂·12H₂O.
B. Li⁺ forms an alum easily.
C. Fe³⁺ and Cr³⁺ can take the place of Al³⁺.
D. Alums of different metals have different crystal shapes.
(a) 1 (b) 2 (c) 3 (d) 4
38. Choose the correct set of statements.
A. A double salt loses its identity in water.
B. K₄[Fe(CN)₆] gives the usual tests for Fe²⁺ in water.
C. Mohr's salt gives the usual tests for Fe²⁺ in water.
D. Potash alum gives the usual tests for Al³⁺ in water.
(a) A and B only (b) B, C and D only (c) C and D only (d) A, C and D only
39. Four students weighed the starting salts for Mohr's salt as below.
| Student | FeSO₄·7H₂O (g) | (NH₄)₂SO₄ (g) |
|---|---|---|
| P | 2.78 | 1.32 |
| Q | 2.78 | 2.64 |
| R | 5.56 | 1.32 |
| S | 1.39 | 2.64 |
Which student used the exact 1:1 mole ratio, and what is the theoretical yield of Mohr's salt for that student? (a) P; 3.92 g (b) Q; 7.84 g (c) R; 5.56 g (d) S; 3.92 g
40. A solubility curve shows that the solubility of potash alum in water rises steeply with temperature: it is several times larger near 80 °C than near 10 °C. Which statement uses this correctly? (a) Alum is best obtained by heating the solution to dryness (b) The hot solution should be plunged into ice to get large crystals (c) A hot, nearly saturated solution deposits crystals on cooling, and slow cooling gives larger crystals (d) Temperature has no effect, so crystals appear only on evaporation
41. Starting with 0.0100 mol of each salt, a student obtains 2.94 g of Mohr's salt. The percentage yield is: (a) 60% (b) 75% (c) 80% (d) 92%
Passage for Q42–43: A student wants potash alum and starts with 3.48 g of K₂SO₄. She plans to add Al₂(SO₄)₃·18H₂O in the correct ratio and a few mL of dilute H₂SO₄, and crystallise slowly.
42. Mass of Al₂(SO₄)₃·18H₂O she must take is: (a) 6.66 g (b) 3.48 g (c) 26.64 g (d) 13.32 g
43. The maximum mass of K₂SO₄·Al₂(SO₄)₃·24H₂O she can obtain is: (a) 9.48 g (b) 37.92 g (c) 18.96 g (d) 16.80 g
44. A Mohr's salt solution boiled for a long time without acid turns yellowish and slightly turbid. The best explanation is: (a) NH₄⁺ is oxidised to NO₂ (b) Fe²⁺ is oxidised by air to Fe³⁺, which hydrolyses to yellow-brown basic salts (c) The solution loses its water of crystallisation (d) SO₄²⁻ is reduced to sulphur
45. Mass of water of crystallisation in 9.48 g of K₂SO₄·Al₂(SO₄)₃·24H₂O is: (a) 2.16 g (b) 4.74 g (c) 5.16 g (d) 4.32 g
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | b | Mohr's green standard, alum colourless octahedral, green vitriol oxidises, (NH₄)₂SO₄ = 132 |
| 32 | d | Acid stops hydrolysis, short heating stops oxidation, slow cooling big crystals, rod test |
| 33 | a | 6, 24, 2 and 2K⁺ + 2Al³⁺ + 4SO₄²⁻ = 8 |
| 34 | c | K–Al, NH₄–Al, K–Cr, NH₄–Fe |
| 35 | c | A, B, E true; alum is colourless; Fe is +2 |
| 36 | a | Both salts 1:1; dilute H₂SO₄, not HNO₃ |
| 37 | b | A and C true; Li⁺ too small; alums are isomorphous |
| 38 | d | Complex ion [Fe(CN)₆]⁴⁻ stays intact, so no free Fe²⁺ |
| 39 | a | 2.78/278 = 1.32/132 = 0.0100 mol; 0.0100 × 392 = 3.92 g |
| 40 | c | Solubility falls on cooling; few nuclei grow large when cooled slowly |
| 41 | b | 2.94/3.92 × 100 = 75% |
| 42 | d | 3.48/174 = 0.0200 mol; 0.0200 × 666 = 13.32 g |
| 43 | c | 0.0200 × 948 = 18.96 g |
| 44 | b | Long heating without acid lets Fe²⁺ oxidise and hydrolyse |
| 45 | d | 9.48/948 = 0.0100 mol; 0.0100 × 24 × 18 = 4.32 g |