Chapter 7 of 11 · 21 min read

Chapter 5: Qualitative Analysis: Anions

Anion analysis works by sorting. Each anion belongs to an acid of a certain strength and stability. A weak or unstable acid is pushed out even by dilute H₂SO₄; a stronger, more stable acid needs conc. H₂SO₄; sulphate is not displaced at all. Preliminary tests sort the anion into a group, and a confirmatory test proves it.

What you will learn

  • The three anion groups and the reason behind each.

  • Preliminary tests with dilute and conc. H₂SO₄: gases, colours, smells.

  • Confirmatory tests for CO₃²⁻, S²⁻, NO₂⁻, NO₃⁻, Cl⁻, Br⁻, I⁻ and SO₄²⁻.

  • The chemistry of the brown ring, chromyl chloride and layer tests.

  • How the sodium carbonate extract is made and used.

5.1 The three groups

GroupReagentAnions (syllabus)Why
Dilute acid groupDilute H₂SO₄ (cold, then warm)CO₃²⁻, S²⁻, NO₂⁻Their acids (H₂CO₃, H₂S, HNO₂) are weak or unstable and escape as gases
Conc. acid groupConc. H₂SO₄, warmCl⁻, Br⁻, I⁻, NO₃⁻Their acids are strong but volatile; non-volatile H₂SO₄ drives them out on heating
Independent groupNo gas with either acid; specific reagentsSO₄²⁻It is the anion of H₂SO₄ itself

Always test with dilute H₂SO₄ first. If a gas comes out, the anion belongs to the first group. If not, go on to conc. H₂SO₄. If still no gas, test for sulphate. Figure 5.1 shows this flow.

5.2 Dilute H₂SO₄ group

AnionObservationGas and its testReaction
CO₃²⁻Brisk effervescence of a colourless, odourless gasCO₂ turns lime water milkyNa₂CO₃ + H₂SO₄ → Na₂SO₄ + H₂O + CO₂↑
S²⁻Colourless gas smelling of rotten eggsH₂S turns lead acetate paper blackNa₂S + H₂SO₄ → Na₂SO₄ + H₂S↑
NO₂⁻Light brown fumesNO₂ turns moist KI-starch paper blue2NaNO₂ + H₂SO₄ → Na₂SO₄ + 2HNO₂; 3HNO₂ → HNO₃ + 2NO + H₂O; 2NO + O₂ → 2NO₂

Lime water: Ca(OH)₂ + CO₂ → CaCO₃↓ (milky) + H₂O. Excess CO₂ makes it clear again: CaCO₃ + CO₂ + H₂O → Ca(HCO₃)₂ (soluble).

Lead acetate paper: (CH₃COO)₂Pb + H₂S → PbS↓ (black) + 2CH₃COOH.

5.3 Conc. H₂SO₄ group

AnionObservation on warming with conc. H₂SO₄Extra check
Cl⁻Colourless, pungent gas (HCl)Dense white fumes of NH₄Cl with a rod dipped in NH₄OH
Br⁻Reddish-brown vapours (Br₂ with some HBr and SO₂)Vapours deepen when MnO₂ is added; turn starch paper yellow
I⁻Violet vapours of I₂Starch paper turns blue
NO₃⁻Light brown fumes of NO₂Fumes deepen when copper turnings are added; solution turns blue

Why do Br⁻ and I⁻ give the free halogen but Cl⁻ gives only HCl? HBr and HI are stronger reducing agents. Hot conc. H₂SO₄ oxidises them, and is itself reduced to SO₂ (and to S or H₂S by HI). HCl is too weak a reductant to be oxidised by H₂SO₄.

NaCl+H2SO4→NaHSO4+HCl↑\mathrm{NaCl + H_2SO_4 \rightarrow NaHSO_4 + HCl \uparrow}
2HBr+H2SO4→Br2+SO2+2H2O\mathrm{2HBr + H_2SO_4 \rightarrow Br_2 + SO_2 + 2H_2O}
4HNO3→4NO2+O2+2H2OCu+4HNO3→Cu(NO3)2+2NO2+2H2O\mathrm{4HNO_3 \rightarrow 4NO_2 + O_2 + 2H_2O \qquad Cu + 4HNO_3 \rightarrow Cu(NO_3)_2 + 2NO_2 + 2H_2O}
Figure 5.1 · Anion analysis flowchart
Figure 5.1 · Anion analysis flowchart

Go down the left column until a test responds; the box to its right names the gas or precipitate and the anion it confirms.

5.4 The sodium carbonate extract

Most confirmatory tests use a solution of the anion. If the salt is not freely soluble, or holds a coloured cation that would interfere, boil it with Na₂CO₃ solution and filter. The metal ion precipitates as a carbonate. The anion goes into the filtrate as its sodium salt. For example: CuCl₂ + Na₂CO₃ → CuCO₃↓ + 2NaCl.

The extract holds a lot of CO₃²⁻, so it is acidified before each test: with dilute HNO₃ for halides, with dilute HCl for sulphate, with acetic acid for S²⁻ and NO₂⁻, with dilute H₂SO₄ for the nitrate ring test.

5.5 Confirmatory tests

AnionTestObservationChemistry
CO₃²⁻MgSO₄ solution added to the salt solutionWhite precipitateMg²⁺ + CO₃²⁻ → MgCO₃↓
S²⁻Sodium nitroprussidePurple/violet colourNa₂S + Na₂[Fe(CN)₅NO] → Na₄[Fe(CN)₅NOS]
S²⁻Lead acetate (acetic acid medium)Black precipitatePb²⁺ + S²⁻ → PbS↓
NO₂⁻KI + starch, acidified with acetic acidDeep blue colour2NO₂⁻ + 2I⁻ + 4H⁺ → 2NO + I₂ + 2H₂O; I₂ + starch → blue
NO₂⁻FeSO₄ in acetic acidDark brown solutionFe²⁺ + NO gives [Fe(H₂O)₅(NO)]²⁺
NO₃⁻Brown ring test: fresh FeSO₄, then conc. H₂SO₄ poured slowly down the sideBrown ring where the layers meetNO₃⁻ + 3Fe²⁺ + 4H⁺ → NO + 3Fe³⁺ + 2H₂O; [Fe(H₂O)₆]²⁺ + NO → [Fe(H₂O)₅(NO)]²⁺ + H₂O
Cl⁻AgNO₃ after dil. HNO₃White precipitate, soluble in NH₄OHAg⁺ + Cl⁻ → AgCl↓; AgCl + 2NH₃ → [Ag(NH₃)₂]Cl
Cl⁻Chromyl chloride testOrange-red vapours → yellow solution in NaOH → yellow ppt with lead acetateSee below
Br⁻AgNO₃ after dil. HNO₃Pale yellow precipitate, partly soluble in NH₄OHAg⁺ + Br⁻ → AgBr↓
Br⁻Layer test: Cl₂ water + CHCl₃ (or CCl₄), shakeOrange-brown organic layerCl₂ + 2Br⁻ → 2Cl⁻ + Br₂
I⁻AgNO₃ after dil. HNO₃Yellow precipitate, insoluble in NH₄OHAg⁺ + I⁻ → AgI↓
I⁻Layer testViolet organic layerCl₂ + 2I⁻ → 2Cl⁻ + I₂
SO₄²⁻BaCl₂ after dil. HClWhite precipitate, insoluble in conc. HClBa²⁺ + SO₄²⁻ → BaSO₄↓
SO₄²⁻Lead acetateWhite precipitate, soluble in ammonium acetatePb²⁺ + SO₄²⁻ → PbSO₄↓

Chromyl chloride test in steps. Heat the solid chloride with solid K₂Cr₂O₇ and conc. H₂SO₄:

4NaCl+K2Cr2O7+6H2SO4→2KHSO4+4NaHSO4+2CrO2Cl2+3H2O\mathrm{4NaCl + K_2Cr_2O_7 + 6H_2SO_4 \rightarrow 2KHSO_4 + 4NaHSO_4 + 2CrO_2Cl_2 + 3H_2O}
CrO2Cl2+4NaOH→Na2CrO4+2NaCl+2H2O\mathrm{CrO_2Cl_2 + 4NaOH \rightarrow Na_2CrO_4 + 2NaCl + 2H_2O}
Na2CrO4+(CH3COO)2Pb→PbCrO4↓+2CH3COONa\mathrm{Na_2CrO_4 + (CH_3COO)_2Pb \rightarrow PbCrO_4 \downarrow + 2CH_3COONa}

Bromides and iodides do not give this test; no chromyl bromide or iodide forms. Covalent chlorides such as HgCl₂ also fail, because they do not give free Cl⁻ easily.

The brown ring. In [Fe(H₂O)₅(NO)]²⁺, NO is taken as NO⁺, so iron is in the +1 state. The ring forms only at the junction because the complex breaks up on warming; conc. H₂SO₄ dissolving in water releases heat, so the test is done cold and the acid is poured gently. Nitrite also gives this brown colour, even with dilute acid, so nitrite must be ruled out first.

5.6 Worked examples

Worked example 5.1: A salt gives brisk effervescence with dilute H₂SO₄. The gas has no smell and turns lime water milky. Which anion is present, and how is SO₂ ruled out?

Solution: CO₂ from CO₃²⁻. SO₂ also turns lime water milky, but it smells of burning sulphur and turns acidified K₂Cr₂O₇ paper green. An odourless gas that does not affect dichromate paper is CO₂.

Worked example 5.2: Salt A gives brown fumes with dilute H₂SO₄. Salt B gives brown fumes only with conc. H₂SO₄ and copper turnings. Identify the anions and give a confirmatory test for each.

Solution: A contains NO₂⁻, since HNO₂ is unstable even in dilute acid. Confirm with KI-starch in acetic acid (blue). B contains NO₃⁻. Confirm with the brown ring test.

Worked example 5.3: A white salt gives violet vapours with conc. H₂SO₄. Its solution gives a yellow precipitate with AgNO₃. Name the anion and write the precipitate's behaviour with ammonia.

Solution: Violet vapours are I₂, so the anion is I⁻. The yellow precipitate is AgI, which does not dissolve in NH₄OH.

Worked example 5.4: Why does NaCl give the chromyl chloride test but NaBr does not?

Solution: Cl⁻ with Cr₂O₇²⁻ and conc. H₂SO₄ forms volatile, orange-red CrO₂Cl₂. Br⁻ is a stronger reducing agent; dichromate and hot acid oxidise it to Br₂, and no chromyl bromide forms. The NaOH solution then stays colourless and lead acetate gives no yellow precipitate.

Worked example 5.5: A solution is shaken with chlorine water and CHCl₃. The lower layer turns violet. More chlorine water is added; the violet fades and an orange-brown colour appears. What ions are present?

Solution: Cl₂ oxidises I⁻ first (it is the stronger reductant), giving violet I₂. Excess Cl₂ oxidises I₂ further to colourless IO₃⁻. Then Br⁻ is oxidised to orange-brown Br₂. Both I⁻ and Br⁻ are present.

Worked example 5.6: A white precipitate forms when BaCl₂ is added to a salt solution. How do you decide between SO₄²⁻ and CO₃²⁻?

Solution: Add dilute HCl. BaCO₃ dissolves with effervescence of CO₂. BaSO₄ does not dissolve, even in conc. HCl. This is why the solution is acidified with HCl before the sulphate test.

Worked example 5.7 (NEET-hard): A colourless salt gives no gas with dilute H₂SO₄. With conc. H₂SO₄ it gives a colourless gas that forms white fumes with an ammonia rod. Heating with K₂Cr₂O₇ and conc. H₂SO₄ gives orange-red vapours. Warming the salt with NaOH gives a gas that turns red litmus blue. Identify it.

Solution: The anion is Cl⁻ (HCl fumes, chromyl chloride test). The gas with NaOH is NH₃, so the cation is NH₄⁺. The salt is NH₄Cl.

Quick revision

  • Dilute H₂SO₄ group: CO₃²⁻ (CO₂), S²⁻ (H₂S), NO₂⁻ (brown NO₂).

  • Conc. H₂SO₄ group: Cl⁻ (HCl), Br⁻ (red-brown Br₂), I⁻ (violet I₂), NO₃⁻ (NO₂, more with Cu).

  • Independent: SO₄²⁻, white BaSO₄ insoluble in conc. HCl.

  • Brown ring: [Fe(H₂O)₅(NO)]²⁺, Fe in +1 state; nitrite interferes.

  • Chromyl chloride: only ionic chlorides; CrO₂Cl₂ → Na₂CrO₄ (yellow) → PbCrO₄ (yellow ppt).

  • Silver halides: AgCl white (soluble in NH₃), AgBr pale yellow (partly), AgI yellow (insoluble).

  • Layer test: Br₂ orange-brown, I₂ violet.

NEET traps

  • Placing NO₃⁻ in the dilute acid group. Only nitrite gives brown fumes with dilute acid.

  • Thinking bromides give the chromyl chloride test.

  • Writing Fe(+2) for the brown ring complex. NCERT treats it as Fe(+1) with NO⁺.

  • Acidifying the Na₂CO₃ extract with HCl before the chloride test. HCl adds Cl⁻.

  • Forgetting that SO₂ also turns lime water milky; odour and dichromate paper tell it apart from CO₂.

  • Saying excess CO₂ keeps lime water milky. Soluble Ca(HCO₃)₂ forms and it clears.

Practice MCQs: Chapter 5

Level 1: Concept check

1. An odourless gas from a salt and dilute H₂SO₄ turns lime water milky. The gas is (a) H₂S (b) SO₂ (c) CO₂ (d) NO₂

2. A smell of rotten eggs with dilute H₂SO₄ shows (a) CO₃²⁻ (b) S²⁻ (c) NO₃⁻ (d) Cl⁻

3. The brown ring test is used for (a) Cl⁻ (b) SO₄²⁻ (c) CO₃²⁻ (d) NO₃⁻

4. The brown ring is due to (a) [Fe(H₂O)₅(NO)]²⁺ (b) [Fe(H₂O)₆]³⁺ (c) Fe(NO₃)₃ (d) [Fe(CN)₅NO]²⁻

5. Violet vapours on warming a salt with conc. H₂SO₄ show (a) Br⁻ (b) I⁻ (c) Cl⁻ (d) NO₃⁻

6. Sulphate gives with BaCl₂ a (a) yellow precipitate soluble in HCl (b) black precipitate (c) white precipitate insoluble in conc. HCl (d) white precipitate soluble in dilute HCl

7. Which anion belongs to the independent group? (a) SO₄²⁻ (b) NO₂⁻ (c) S²⁻ (d) CO₃²⁻

8. Lead acetate paper is turned black by (a) CO₂ (b) HCl (c) NO₂ (d) H₂S

9. The chromyl chloride test is given by (a) bromides (b) chlorides (c) iodides (d) nitrates

10. The colour of chromyl chloride vapours is (a) violet (b) colourless (c) orange-red (d) green

Level 2: NEET standard

11. Brown fumes on adding dilute H₂SO₄ to a salt show (a) nitrite (b) nitrate (c) bromide (d) carbonate

12. In the layer test, bromide gives an organic layer that is (a) violet (b) colourless (c) green (d) orange-brown

13. A nitrite solution with KI and starch in acetic acid gives (a) a white precipitate (b) a brown ring (c) a deep blue colour (d) a violet layer

14. The brown fumes from a nitrate with conc. H₂SO₄ become denser on adding (a) MnO₂ (b) copper turnings (c) zinc dust (d) NH₄OH

15. The sodium carbonate extract is prepared to (a) remove interfering cations as carbonates and bring anions into solution as sodium salts (b) oxidise the anions (c) reduce the cations (d) remove carbonate ions

16. Chromyl chloride vapours passed into NaOH give a yellow solution of (a) PbCrO₄ (b) CrCl₃ (c) K₂Cr₂O₇ (d) Na₂CrO₄

17. Reddish-brown vapours with conc. H₂SO₄ that deepen with MnO₂ show (a) NO₃⁻ (b) Cl⁻ (c) Br⁻ (d) I⁻

18. Sodium nitroprusside gives with sulphide ions a (a) purple colour (b) blood-red colour (c) blue colour (d) green colour

19. The brown ring test for nitrate is unreliable when nitrite is present because (a) nitrite oxidises FeSO₄ to a blue product (b) nitrite gives a brown colour with FeSO₄ even in dilute acid (c) nitrite forms a white precipitate (d) nitrite explodes with conc. H₂SO₄

20. When a bromide is warmed with conc. H₂SO₄, besides Br₂ the gas formed is (a) H₂S (b) Cl₂ (c) NO₂ (d) SO₂

21. A white precipitate with BaCl₂ dissolves in dilute HCl with effervescence. The anion is (a) CO₃²⁻ (b) SO₄²⁻ (c) NO₃⁻ (d) Cl⁻

22. Before testing the sodium carbonate extract for Cl⁻ with AgNO₃, it is acidified with (a) HCl (b) H₂SO₄ (c) dilute HNO₃ (d) acetic acid

Level 3: Challenge

23. Milky lime water turns clear when excess CO₂ is passed because of the formation of (a) CaO (b) soluble Ca(HCO₃)₂ (c) CaSO₄ (d) CaC₂

24. A salt gives with conc. H₂SO₄ a colourless, pungent gas that forms white fumes with a rod dipped in NH₄OH. The anion is (a) NO₃⁻ (b) I⁻ (c) Br⁻ (d) Cl⁻

25. A solution with chlorine water and CCl₄ gives a violet layer. With excess chlorine water the violet fades and an orange-brown colour appears. The solution contains (a) only I⁻ (b) only Br⁻ (c) both I⁻ and Br⁻ (d) Cl⁻ and NO₃⁻

26. The oxidation state of iron in the brown ring complex is taken as (a) +1 (b) +2 (c) +3 (d) 0

27. Which pair can NOT be distinguished with dilute H₂SO₄? (a) Na₂CO₃ and NaCl (b) Na₂S and NaNO₃ (c) NaNO₂ and NaNO₃ (d) NaCl and NaNO₃

28. Which chloride does NOT give the chromyl chloride test? (a) NaCl (b) HgCl₂ (c) KCl (d) NH₄Cl

29. Assertion (A): Lime water turns milky when CO₂ is passed through it. Reason (R): Insoluble CaCO₃ is formed. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Iodides give violet vapours when warmed with conc. H₂SO₄. Statement II: AgI dissolves readily in dilute NH₄OH. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1cCO₂ is odourless; CaCO₃ forms
2bH₂S smell
3dFe²⁺/conc. H₂SO₄ reduces NO₃⁻ to NO
4aNitrosyl iron complex
5bI₂ vapour is violet
6cBaSO₄ is insoluble in acids
7aNot displaced by H₂SO₄
8dBlack PbS
9bOnly chlorides form CrO₂Cl₂
10cDeep orange-red vapour
11aHNO₂ decomposes in dilute acid
12dFree Br₂ colour
13cNO₂⁻ frees I₂, which colours starch
14bCu reduces HNO₃ to NO₂
15aInterfering cations removed as carbonates
16dChromate is yellow
17cMnO₂ oxidises more HBr to Br₂
18a[Fe(CN)₅NOS]⁴⁻ is purple
19bNitrite gives NO in dilute acid
20dH₂SO₄ is reduced to SO₂
21aBaCO₃ dissolves releasing CO₂
22cHNO₃ adds no interfering anion
23bCaCO₃ + CO₂ + H₂O → Ca(HCO₃)₂
24dHCl + NH₃ → NH₄Cl fumes
25cI⁻ oxidised first, then Br⁻
26aNO bound as NO⁺
27dNeither reacts with dilute H₂SO₄
28bCovalent HgCl₂ gives little free Cl⁻
29aR is the cause of the milkiness
30cAgI is insoluble in NH₃

Chapter 5 revision sheet

One-page summary

  • Anions are sorted by what they do with acid: dilute H₂SO₄ group (CO₃²⁻, S²⁻, NO₂⁻), conc. H₂SO₄ group (Cl⁻, Br⁻, I⁻, NO₃⁻), and the independent group (SO₄²⁻).

  • Always try dilute H₂SO₄ first; only if nothing happens move to conc. H₂SO₄.

  • CO₃²⁻: brisk effervescence of colourless, odourless CO₂; lime water turns milky (CaCO₃) and clears with excess CO₂ (Ca(HCO₃)₂).

  • S²⁻: H₂S with rotten-egg smell; lead acetate paper turns black (PbS); sodium nitroprusside gives violet colour.

  • NO₂⁻: light brown NO₂ fumes even with dilute acid; KI + starch turns blue (I₂ set free).

  • Cl⁻: HCl gas gives white fumes with NH₃; AgNO₃ gives white curdy AgCl, soluble in NH₃; chromyl chloride test.

  • Chromyl chloride: K₂Cr₂O₇ + conc. H₂SO₄ → orange-red CrO₂Cl₂ vapours → yellow Na₂CrO₄ in NaOH → yellow PbCrO₄ with lead acetate. Only ionic chlorides give it.

  • Br⁻: red-brown Br₂ vapours (more with MnO₂); AgBr pale yellow, partly soluble in NH₃; orange-brown CHCl₃ layer with chlorine water.

  • I⁻: violet I₂ vapours; AgI yellow, insoluble in NH₃; violet CHCl₃ layer; blue with starch.

  • NO₃⁻: brown NO₂ with conc. H₂SO₄, much more with copper turnings (solution turns blue).

  • Brown ring test: FeSO₄ solution, then conc. H₂SO₄ poured down the side; brown ring of [Fe(H₂O)₅(NO)]²⁺ at the junction (Fe in +1 state). NO₂⁻ interferes; remove it first by warming with NH₄Cl.

  • SO₄²⁻: white BaSO₄ with BaCl₂, insoluble in conc. HCl/HNO₃; white PbSO₄ with lead acetate, soluble in ammonium acetate.

  • Sodium carbonate extract: boil the salt with Na₂CO₃, filter; heavy-metal ions are removed as carbonates. Acidify with dil. HNO₃ before AgNO₃, with dil. HCl before BaCl₂.

Must-remember table

AnionAcid groupPreliminary signConfirmatory testResult
CO₃²⁻DiluteOdourless gas, lime water milkyLime waterMilky, clears with excess
S²⁻DiluteRotten-egg smellSodium nitroprussideViolet
NO₂⁻DiluteLight brown fumesKI + starchBlue
Cl⁻Conc.Pungent gas, white fumes with NH₃AgNO₃ / chromyl chlorideWhite ppt / yellow PbCrO₄
Br⁻Conc.Red-brown vapoursAgNO₃ / layer testPale yellow ppt / orange-brown layer
I⁻Conc.Violet vapoursAgNO₃ / layer testYellow ppt / violet layer
NO₃⁻Conc.Brown fumes, more with CuBrown ringBrown ring at junction
SO₄²⁻IndependentNoneBaCl₂White ppt, insoluble in conc. HCl

Memory aids

  • "Cool Snakes Nap" for the dilute acid group: Carbonate, Sulphide, Nitrite.

  • "Colourless, Rust, Violet" for the halogen vapours from Cl⁻, Br⁻ and I⁻ with conc. H₂SO₄.

  • "Iron wears an NO hat": the brown ring is iron (+1) carrying an NO⁺ ligand.

  • "Chromyl loves only real chloride": only ionic chlorides give CrO₂Cl₂; bromides and iodides do not.

Concept connections

  • Gas chemistry (CO₂, H₂S, NO₂, halogens) is in Chemistry Book 10: p-Block Elements.

  • The brown ring complex and [Ag(NH₃)₂]⁺ are covered in Chemistry Book 12: Coordination Compounds.

  • Why AgCl dissolves in NH₃ but AgI does not is a solubility product idea from Chemistry Book 6: Equilibrium.

Practice MCQs: Chapter 5, Level 4 (new NEET pattern)

31. Match List I (anion with acid) with List II (observation).

List I:

  • A. CO₃²⁻ with dilute H₂SO₄

  • B. S²⁻ with dilute H₂SO₄

  • C. Br⁻ with conc. H₂SO₄

  • D. I⁻ with conc. H₂SO₄

List II:

  • (i) Violet vapours

  • (ii) Colourless, odourless gas that turns lime water milky

  • (iii) Red-brown vapours

  • (iv) Gas smelling of rotten eggs

(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-iv, C-i, D-iii (d) A-iii, B-iv, C-ii, D-i

32. Match List I (confirmatory test) with List II (anion).

List I:

  • A. Brown ring test

  • B. Chromyl chloride test

  • C. BaCl₂, white ppt insoluble in conc. HCl

  • D. Violet colour with sodium nitroprusside

List II:

  • (i) NO₃⁻

  • (ii) Cl⁻

  • (iii) SO₄²⁻

  • (iv) S²⁻

(a) A-i, B-ii, C-iii, D-iv (b) A-ii, B-i, C-iii, D-iv (c) A-i, B-iii, C-ii, D-iv (d) A-iv, B-ii, C-iii, D-i

33. Match List I (precipitate) with List II (description).

List I:

  • A. AgCl

  • B. AgBr

  • C. AgI

  • D. PbS

List II:

  • (i) Black

  • (ii) Yellow, insoluble in aqueous NH₃

  • (iii) White, soluble in aqueous NH₃

  • (iv) Pale yellow, partly soluble in aqueous NH₃

(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-ii, C-iv, D-i (c) A-i, B-iv, C-ii, D-iii (d) A-iii, B-iv, C-ii, D-i

34. Match List I (what is seen) with List II (species responsible).

List I:

  • A. Brown ring

  • B. Orange-red vapours in the chromyl chloride test

  • C. Milkiness in lime water

  • D. Violet chloroform layer

List II:

  • (i) I₂

  • (ii) CaCO₃

  • (iii) [Fe(H₂O)₅(NO)]²⁺

  • (iv) CrO₂Cl₂

(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-iv, C-i, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-ii, B-iv, C-iii, D-i

35. How many of the following statements are correct?

  • A. Carbonate gives effervescence with dilute H₂SO₄.

  • B. Nitrate gives brown fumes with dilute H₂SO₄.

  • C. Nitrite gives brown fumes with dilute H₂SO₄.

  • D. Sulphate gives no characteristic gas with acid, so it is tested separately.

  • E. Iodide gives violet vapours with conc. H₂SO₄.

(a) 1 (b) 2 (c) 3 (d) 4

36. Choose the correct set of statements about the brown ring test.

  • A. Iron is in the +1 state in the brown complex.

  • B. NO acts as a ligand in the complex.

  • C. The ring forms at the junction when conc. H₂SO₄ is poured down the side of the tube.

  • D. The ring becomes darker on shaking and warming.

(a) A and D only (b) A, B and C only (c) B, C and D only (d) A, B, C and D

37. How many of the following statements about the chromyl chloride test are correct?

  • A. Ionic chlorides heated with K₂Cr₂O₇ and conc. H₂SO₄ give it.

  • B. HgCl₂ gives it strongly.

  • C. Bromides give a similar red vapour, CrO₂Br₂.

  • D. The vapours passed into NaOH give a yellow solution of Na₂CrO₄.

  • E. This yellow solution with acetic acid and lead acetate gives yellow PbCrO₄.

(a) 1 (b) 2 (c) 3 (d) 4

38. Choose the correct set of statements about the sodium carbonate extract.

  • A. It is made by boiling the salt with Na₂CO₃ solution and filtering.

  • B. It removes interfering heavy-metal ions as insoluble carbonates.

  • C. Before the AgNO₃ test, it is acidified with dilute HNO₃.

  • D. Before the BaCl₂ test, it is acidified with dilute H₂SO₄.

(a) A, B and C only (b) A and D only (c) B, C and D only (d) C and D only

39. Salt X gave these results.

TestObservation
Dilute H₂SO₄No gas
Conc. H₂SO₄, warmRed-brown vapours, stronger when MnO₂ is added
AgNO₃ after dil. HNO₃Pale yellow ppt, partly soluble in NH₃

The anion in X is: (a) Cl⁻ (b) I⁻ (c) Br⁻ (d) NO₃⁻

40. Two sodium salts P and Q gave these results.

SaltDilute H₂SO₄Conc. H₂SO₄ + copper turnings
PLight brown fumes–
QNo changeDense brown fumes; solution turns blue

P and Q contain: (a) P: NO₂⁻, Q: NO₃⁻ (b) P: NO₃⁻, Q: NO₂⁻ (c) P: Br⁻, Q: NO₃⁻ (d) P: NO₂⁻, Q: Br⁻

41. A salt solution is shaken with chlorine water and chloroform. The tube now shows two layers: the upper layer is colourless and the lower layer is violet. The correct conclusion is: (a) Br⁻; bromine is in the upper layer (b) I⁻; iodine is in the upper layer (c) Cl⁻; chlorine dissolves in chloroform (d) I⁻; iodine dissolves in the denser chloroform layer

Passage for Q42–43: A white mixture of two sodium salts gives brisk effervescence with dilute H₂SO₄. The gas is colourless and odourless and turns lime water milky. Another portion is acidified with dilute HCl, boiled, and BaCl₂ is added: a white ppt forms that does not dissolve in conc. HCl.

42. The gas and the first anion are: (a) SO₂; sulphite (b) CO₂; carbonate (c) H₂S; sulphide (d) NO₂; nitrite

43. Why is the second portion acidified with HCl before adding BaCl₂? (a) To make BaSO₄ more soluble (b) To oxidise sulphate to sulphite (c) To destroy carbonate, so that white BaCO₃ does not give a false result (d) To supply chloride for the chromyl chloride test

44. Which reagent removes nitrite before the brown ring test for nitrate? (a) NH₄Cl, warmed (b) NaCl (c) BaCl₂ (d) FeSO₄

45. AgBr is partly soluble in aqueous NH₃ but AgI is not. The best reason is: (a) AgI is covalent and NH₃ is polar (b) AgI forms a stronger complex with NH₃ (c) I⁻ reacts with NH₃ (d) Ksp of AgI is so small that NH₃ cannot lower [Ag⁺] enough to dissolve it

Level 4 answer key

QAnsReason
31bCO₂ milky, H₂S rotten egg, Br₂ red-brown, I₂ violet
32aBrown ring NO₃⁻, chromyl Cl⁻, BaSO₄ SO₄²⁻, nitroprusside S²⁻
33dWhite soluble, pale yellow partly, yellow insoluble, black PbS
34cNitrosyl iron complex, CrO₂Cl₂, CaCO₃, I₂
35dA, C, D, E true; nitrate needs conc. acid
36bThe ring is unstable; it fades on shaking or warming
37cA, D, E true; covalent HgCl₂ fails; no CrO₂Br₂ forms
38aH₂SO₄ would add SO₄²⁻ itself; use HCl
39cRed-brown Br₂ and pale yellow, partly soluble AgBr
40aNitrite reacts with dilute acid; nitrate needs conc. acid and Cu
41dCHCl₃ is denser than water; violet = I₂
42bOdourless gas turning lime water milky = CO₂
43cBaCO₃ is white but dissolves in acid; removing CO₃²⁻ avoids error
44aNH₄⁺ + NO₂⁻ → N₂ + 2H₂O on warming
45dAgI's tiny Ksp keeps [Ag⁺] below what complexation can use
21 min left
‹
›