Unit Test: Experimental Skills
Time: 50 minutes. 45 questions. Marking: +4 for a correct answer, −1 for a wrong answer, 0 if left blank. Take g = 10 m/s² and cᵤ = 4200 J/kg K unless stated.
1. Vernier callipers have 50 vernier divisions equal to 49 main scale divisions of 1 mm each. The least count is (a) 0.01 mm (b) 0.05 mm (c) 0.02 mm (d) 0.2 mm
2. Vernier callipers (LC 0.01 cm) have a zero error of −0.04 cm. A rod gives MSR = 4.5 cm and the 3rd vernier division coincides. The true length is (a) 4.57 cm (b) 4.49 cm (c) 4.53 cm (d) 4.43 cm
3. A screw gauge has pitch 0.5 mm and 100 circular divisions, with no zero error. A wire gives PSR = 1.5 mm and CSR = 62. Its diameter is (a) 2.12 mm (b) 1.562 mm (c) 1.62 mm (d) 1.810 mm
4. With the studs of a screw gauge (LC 0.01 mm) touching, the circular zero lies 4 divisions below the reference line. The correction to be applied to every reading is (a) +0.04 mm (b) −0.04 mm (c) +0.96 mm (d) −0.96 mm
5. A metre scale balances at 50 cm. A 60 g mass at the 30 cm mark is balanced by an unknown mass at the 74 cm mark. The unknown mass is (a) 50 g (b) 72 g (c) 40 g (d) 60 g
6. The amplitude of a damped pendulum falls from 6 cm to 2 cm. The fraction of the original energy left is (a) 1/3 (b) 2/3 (c) 1/9 (d) 8/9
7. A wire 1.5 m long and 0.40 mm in diameter stretches 1.2 mm under a 2.0 kg load. Its Young's modulus is about (a) 5.0 × 10¹⁰ N/m² (b) 4.0 × 10¹¹ N/m² (c) 1.0 × 10¹¹ N/m² (d) 2.0 × 10¹¹ N/m²
8. Water (T = 0.07 N/m, contact angle zero) is in a clean capillary of radius 0.50 mm. The rise is (a) 1.4 cm (b) 2.8 cm (c) 5.6 cm (d) 0.28 cm
9. A steel ball has terminal velocity 3 cm/s in glycerine. A steel ball of half the radius in the same glycerine has terminal velocity (a) 1.5 cm/s (b) 6 cm/s (c) 0.75 cm/s (d) 12 cm/s
10. The glycerine in a viscosity experiment warms up on a hot day. The terminal velocity of the same ball (a) increases (b) decreases (c) does not change (d) becomes zero
11. A 320 Hz fork gives resonance at 25.4 cm and 78.6 cm. The speed of sound is about (a) 170 m/s (b) 325 m/s (c) 681 m/s (d) 340 m/s
12. For the data of Q11, the end correction is (a) 2.4 cm (b) 1.2 cm (c) 0.6 cm (d) 0.4 cm
13. An 80 g solid at 100 °C is dropped into 120 g of water at 25 °C in a calorimeter of water equivalent 8 g. The final temperature is 32 °C. The specific heat of the solid is about (a) 692 J/kg K (b) 650 J/kg K (c) 548 J/kg K (d) 1384 J/kg K
14. A calorimeter of mass 200 g is made of a metal of specific heat 420 J/kg K. Its water equivalent is (a) 200 g (b) 2 g (c) 20 g (d) 42 g
15. With 8 Ω in the left gap of a metre bridge, the balance point is at 64.0 cm. The resistance in the right gap is (a) 14.2 Ω (b) 2.88 Ω (c) 5.12 Ω (d) 4.5 Ω
16. A 5.0 Ω wire is 0.50 m long and 0.30 mm in diameter. Its resistivity is about (a) 2.83 × 10⁻⁶ Ω m (b) 7.07 × 10⁻⁷ Ω m (c) 1.41 × 10⁻⁷ Ω m (d) 3.5 × 10⁻⁷ Ω m
17. A graph with I on the y-axis and V on the x-axis for a wire has slope 0.08 A/V. The resistance is (a) 0.08 Ω (b) 8 Ω (c) 12.5 Ω (d) 80 Ω
18. In a half deflection experiment, R = 8000 Ω and the deflection halves with S = 80 Ω. The galvanometer resistance is about (a) 80.8 Ω (b) 80.0 Ω (c) 79.2 Ω (d) 8080 Ω
19. A galvanometer of resistance 100 Ω in series with 9900 Ω and a 2 V cell shows 20 divisions. Its figure of merit is (a) 2 × 10⁻⁴ A/div (b) 1 × 10⁻⁴ A/div (c) 5 × 10⁻⁶ A/div (d) 1 × 10⁻⁵ A/div
20. For a concave mirror, the object needle is 20 cm and the image needle 30 cm in front of the pole. The magnitude of the focal length is (a) 50 cm (b) 12 cm (c) 10 cm (d) 24 cm
21. For a convex lens, the object needle is 20 cm on one side and the image needle 60 cm on the other side. The focal length is (a) 15 cm (b) 30 cm (c) 40 cm (d) 12 cm
22. In the convex mirror experiment, the mirror is 24 cm in front of the point where the lens alone formed the image, when the image falls back on the object needle. The focal length of the mirror is (a) 24 cm (b) 48 cm (c) 12 cm (d) 6 cm
23. A 60° prism gives a minimum deviation of 48°. Its refractive index is about (a) 1.50 (b) 1.62 (c) 1.73 (d) 1.41
24. A ray falls on a 60° prism at i = 38° and is deviated by 42°. The angle of emergence is (a) 42° (b) 26° (c) 80° (d) 64°
25. Travelling microscope readings are R₁ = 3.215 cm, R₂ = 4.115 cm and R₃ = 6.815 cm. The refractive index is about (a) 1.33 (b) 1.50 (c) 1.25 (d) 4.00
26. A diode's forward voltage rises by 0.04 V while its current rises by 8 mA. Its dynamic resistance is (a) 0.5 Ω (b) 50 Ω (c) 5 Ω (d) 200 Ω
27. A 5.0 V Zener with R_S = 250 Ω is fed from 9.0 V and supplies a 1 kΩ load. The Zener current is (a) 16 mA (b) 11 mA (c) 5 mA (d) 21 mA
28. An item shows a steady 1 kΩ on an ohmmeter in both directions. It is (a) a capacitor (b) a diode (c) an LED (d) a resistor
29. Which of these graphs is a straight line? (a) A² vs t for a damped pendulum (b) δ vs i for a prism (c) ln A² vs t for a damped pendulum (d) v vs u (magnitudes) for a convex lens
30. In the capillary rise experiment, the measurement that needs the most care is (a) the radius of the bore (b) the density of water (c) the value of g (d) the length of tube above the water
31. A steel tumbler has external diameter 7.36 cm and internal diameter 6.92 cm. Its wall thickness is (a) 0.44 cm (b) 0.22 cm (c) 0.11 cm (d) 7.14 cm
32. The circular scale of a screw gauge has 50 divisions and the spindle advances 1.0 mm in two rotations. The least count is (a) 0.02 mm (b) 0.005 mm (c) 0.05 mm (d) 0.01 mm
33. For a damped pendulum, A² halves every 45 s. The starting amplitude is 8 cm. After 135 s the amplitude is about (a) 2.8 cm (b) 1.0 cm (c) 4.0 cm (d) 2.0 cm
34. A ball of density 8000 kg/m³ falls through a liquid of density 1200 kg/m³ at 4 cm/s. A ball of the same size and density 4600 kg/m³ in the same liquid falls at (a) 2.3 cm/s (b) 4 cm/s (c) 2 cm/s (d) 8 cm/s
35. With a 550 Hz fork, speed of sound 330 m/s and end correction 1.0 cm, the second resonance length is (a) 45 cm (b) 44 cm (c) 42 cm (d) 46 cm
36. The speed of sound at 0 °C is 332 m/s. At 35 °C it is about (a) 332 m/s (b) 311 m/s (c) 367 m/s (d) 353 m/s
37. A 150 g copper block (c = 400 J/kg K) at 100 °C is dropped into 120 g of a liquid at 20 °C. The final temperature is 36 °C. Ignoring the container, the specific heat of the liquid is (a) 1000 J/kg K (b) 4000 J/kg K (c) 2000 J/kg K (d) 2500 J/kg K
38. A metre bridge balances at 35.0 cm. If R and X are interchanged and there is no end error, the new balance point is at (a) 65.0 cm (b) 35.0 cm (c) 50.0 cm (d) 30.0 cm
39. In an Ohm's law set-up, the ammeter reads 0.25 A and the voltmeter (resistance 200 Ω, across the wire) reads 2.0 V. The true resistance of the wire is about (a) 8.0 Ω (b) 7.7 Ω (c) 200 Ω (d) 8.3 Ω
40. A 1/u vs 1/v graph (magnitudes) for a concave mirror cuts each axis at 0.04 cm⁻¹. The focal length is (a) 4 cm (b) 25 cm (c) 50 cm (d) 12.5 cm
41. A 60° prism gives a deviation of 40° at i = 42°. The same deviation is also obtained at i equal to (a) 42° (b) 48° (c) 58° (d) 18°
42. A 12 V Zener diode is rated at 0.6 W. The largest safe Zener current is (a) 50 mA (b) 20 mA (c) 7.2 A (d) 5 mA
43. Assertion (A): Using two resonance lengths gives the speed of sound without knowing the end correction. Reason (R): The end correction cancels when l₁ is subtracted from l₂. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
44. Assertion (A): In the half deflection method, G is nearly equal to S when R is very much larger than S. Reason (R): The figure of merit of a galvanometer is equal to its current sensitivity. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
45. Statement I: In the method of mixtures, heat lost to the surroundings gives too high a value for the specific heat of the solid. Statement II: After placing the slab, the travelling microscope is moved down to focus on the image of the mark. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | c | 1 mm/50 = 0.02 mm |
| 2 | a | 4.53 − (−0.04) = 4.57 cm |
| 3 | d | LC 0.005 mm; 1.5 + 0.310 = 1.810 mm |
| 4 | b | Positive error +0.04 mm, so subtract 0.04 mm |
| 5 | a | 60 × 20 = m × 24, m = 50 g |
| 6 | c | (2/6)² = 1/9 |
| 7 | d | 20 × 1.5/(π × 4 × 10⁻⁸ × 1.2 × 10⁻³) = 2.0 × 10¹¹ |
| 8 | b | h = 2T/(rρg) = 0.14/5 = 0.028 m |
| 9 | c | v ∝ r²: 3/4 = 0.75 cm/s |
| 10 | a | Warmer liquid, lower η, faster fall |
| 11 | d | 2 × 320 × 0.532 = 340.5 m/s |
| 12 | b | (78.6 − 76.2)/2 = 1.2 cm |
| 13 | a | 0.128 × 4200 × 7/(0.08 × 68) = 692 J/kg K |
| 14 | c | 200 × 420/4200 = 20 g |
| 15 | d | 8 × 36/64 = 4.5 Ω |
| 16 | b | 5 × π × (0.15 × 10⁻³)²/0.50 = 7.07 × 10⁻⁷ Ω m |
| 17 | c | R = 1/0.08 = 12.5 Ω |
| 18 | a | 8000 × 80/7920 = 80.8 Ω |
| 19 | d | I = 2/10000 = 2 × 10⁻⁴ A; /20 = 1 × 10⁻⁵ A/div |
| 20 | b | 1/30 + 1/20 = 5/60, f = 12 cm |
| 21 | a | 1/60 + 1/20 = 4/60, f = 15 cm |
| 22 | c | R = 24 cm, f = 12 cm |
| 23 | b | sin 54°/sin 30° = 1.62 |
| 24 | d | e = δ + A − i = 42 + 60 − 38 = 64° |
| 25 | a | 3.600/2.700 = 1.33 |
| 26 | c | 0.04/0.008 = 5 Ω |
| 27 | b | I_S = 16 mA, I_L = 5 mA, I_Z = 11 mA |
| 28 | d | Same reading both ways |
| 29 | c | ln A² falls linearly with t |
| 30 | a | Smallest quantity, largest percentage error |
| 31 | b | 0.44/2 = 0.22 cm |
| 32 | d | Pitch 0.5 mm; 0.5/50 = 0.01 mm |
| 33 | a | Three halvings: 64 → 8 cm², A = 2.83 cm |
| 34 | c | v ∝ (ρ − σ): 3400/6800 × 4 = 2 cm/s |
| 35 | b | λ = 60 cm; 3λ/4 − e = 45 − 1 = 44 cm |
| 36 | d | 332 + 0.61 × 35 = 353 m/s |
| 37 | c | 0.15 × 400 × 64/(0.12 × 16) = 2000 J/kg K |
| 38 | a | Balance moves to 100 − l |
| 39 | d | Wire current 0.25 − 0.01 = 0.24 A; 2.0/0.24 = 8.3 Ω |
| 40 | b | f = 1/0.04 = 25 cm |
| 41 | c | e = 40 + 60 − 42 = 58°; i and e can swap |
| 42 | a | 0.6/12 = 0.05 A |
| 43 | a | v = 2f(l₂ − l₁) has no e in it |
| 44 | c | Figure of merit is the reciprocal of current sensitivity |
| 45 | b | Loss gives a low value; microscope is raised, not lowered |