Chapter 11 of 11 · 16 min read

Last-Week Revision Kit

Use this kit in the final week. Read the sheet once a day, say the rapid-fire facts aloud, tick the checklist honestly, then sit Mock Test 2 against the clock.

Book-at-a-glance sheet

Chapter 1: Centre of mass

IdeaFormula or fact
Two massesx_cm = (m₁x₁ + m₂x₂)/(m₁ + m₂); r₁/r₂ = m₂/m₁
Continuous bodyx_cm = (1/M)∫x dm
Standard COMs (from centre)semicircular ring 2R/π; semicircular disc 4R/(3π); solid hemisphere 3R/8; hollow hemisphere R/2
Motion of COMMv_cm = Σmᵢvᵢ; Ma_cm = F_ext
No external forceCOM stays at rest or moves uniformly; internal forces never shift it

Chapter 2: Torque and equilibrium

IdeaFormula or fact
Torqueτ = r × F, magnitude rF sin θ = F × r⊥
Coupleτ = Fd, zero net force, same about every point
EquilibriumΣF = 0 and Στ = 0
Leverload × load arm = effort × effort arm
Ladder (smooth wall)f = N_wall, N_floor = total weight

Chapters 3 and 4: Moment of inertia

BodyCentral axisOther useful axis
Rod (M, L)ML²/12 (centre, perpendicular)ML²/3 (end)
RingMR² (perpendicular)MR²/2 diameter; 3MR²/2 tangent in plane; 2MR² tangent perpendicular
DiscMR²/2 (perpendicular)MR²/4 diameter; 5MR²/4 tangent in plane; 3MR²/2 tangent perpendicular
Solid sphere2MR²/57MR²/5 tangent
Hollow sphere2MR²/35MR²/3 tangent
Square plate (a)Ma²/6 (perpendicular)Ma²/12 any in-plane central axis; Ma²/3 edge
TheoremsI = I_cm + Md² (any body)I_z = I_x + I_y (flat body only)

Chapter 5: Rotational dynamics

IdeaFormula or fact
Kinematicsω = ω₀ + αt; θ = ω₀t + ½αt²; ω² = ω₀² + 2αθ
Second lawτ = Iα
Energy, work, powerK = ½Iω²; W = τθ; P = τω
Pulley with massa = mg/(m + I/R²)
Hinged rod from horizontalα₀ = 3g/(2L); ω_vertical = √(3g/L)

Chapter 6: Angular momentum

IdeaFormula or fact
ParticleL = mvr sin θ = mvr⊥
Rigid bodyL = Iω; K = L²/(2I)
Torque linkτ = dL/dt; τΔt = ΔL
ConservationI₁ω₁ = I₂ω₂ when τ_ext = 0
Kepler IIdA/dt = L/(2m) constant; v_p r_p = v_a r_a

Chapter 7: Rolling

IdeaFormula or fact
Conditionv_cm = Rω; contact point at rest
Point speedstop 2v, centre v, contact 0, side √2 v
KE½Mv²(1 + β), β = k²/R²
Inclinea = g sin θ/(1 + β); v = √(2gh/(1 + β)); μ_min = β tan θ/(1 + β)
Race ordersolid sphere, disc, hollow sphere, ring

40 rapid-fire facts

  1. The COM of a ring lies at its centre, where there is no mass.

  2. Internal forces cannot change the velocity of the COM.

  3. After a shell explodes in mid-air, its COM follows the old parabola until a fragment hits the ground.

  4. For two masses, the COM is closer to the heavier one: r₁/r₂ = m₂/m₁.

  5. The COM of a uniform triangular plate is at its centroid, where the medians meet.

  6. The COM of a solid hemisphere is 3R/8 from the flat face; of a hollow hemisphere, R/2.

  7. A boat-and-man system with no horizontal external force keeps its COM fixed.

  8. Torque is zero when the force passes through the axis or is parallel to it.

  9. Torque is an axial vector with unit N m, never J.

  10. A couple gives rotation only; its torque is the same about every point.

  11. A couple can be balanced only by another couple.

  12. A body can be in equilibrium while moving at constant velocity.

  13. Second-class levers (nutcracker, wheelbarrow) always have MA greater than 1.

  14. Third-class levers (tongs, human forearm) always have MA less than 1.

  15. MI depends on the axis; it does not depend on angular speed.

  16. The radius of gyration depends on shape and axis, not on total mass.

  17. For the same M and R: ring MR² is greater than hollow sphere 2MR²/3, then disc MR²/2, then solid sphere 2MR²/5.

  18. A rod's MI about its end is four times its MI about its centre.

  19. Of all parallel axes, the axis through the COM has the least MI.

  20. The perpendicular axis theorem works only for flat bodies.

  21. A square plate has the same MI, Ma²/12, about every in-plane axis through its centre.

  22. A tangent axis MI = central MI + MR².

  23. One revolution = 2π rad; 1 rpm = 2π/60 rad/s.

  24. Tangential acceleration is rα; centripetal acceleration is rω².

  25. Power in rotation is τω.

  26. A heavy pulley makes the two rope tensions unequal.

  27. A rod hinged at one end and released horizontal starts with free-end acceleration 3g/2.

  28. Angular momentum has unit kg m²/s, the same as J s.

  29. A particle in straight-line motion has constant angular momentum about any fixed point.

  30. Pulling the arms in raises both ω and rotational KE; L stays the same.

  31. Coupling two spinning discs conserves L but loses KE.

  32. In an impact on a pivoted body, use L about the pivot, not linear momentum.

  33. A planet moves fastest at perihelion and slowest at aphelion.

  34. Kepler's second law is a statement of angular momentum conservation.

  35. In pure rolling, the contact point is at rest for that instant.

  36. The top of a rolling wheel moves at twice the centre's speed.

  37. Static friction does no work in pure rolling on a fixed surface.

  38. A solid sphere beats a ring down the same incline whatever their masses and radii.

  39. A ring rolling has half its KE as rotation; a solid sphere has 2/7.

  40. On a frictionless incline, a body released from rest slides without rolling.

Common mistakes checklist

  • I measure r⊥ from the axis to the line of action, not to the point where the force is applied.

  • I don't confuse torque (vector, N m) with work (scalar, J).

  • I use the parallel axis theorem only through the COM axis, never between two off-COM axes directly.

  • I don't use the perpendicular axis theorem for a sphere, cube or thick cylinder.

  • I convert rpm to rad/s before using any rotation formula.

  • I don't assume equal tensions on both sides of a pulley that has mass.

  • I can say why KE rises when a skater pulls in her arms while L stays fixed.

  • I don't conserve linear momentum when a pivot acts during an impact.

  • I add rotational KE to translational KE for every rolling body.

  • I don't confuse "same height" (same speed for each shape) with "same time" (depends on incline angle and shape).

Mock Test 2: New-pattern paper

Time: 35 minutes. 30 questions. Marking: +4 for a correct answer, −1 for a wrong one, 0 if left blank. Take g = 10 m/s² unless stated.

For assertion–reason questions use these options: (a) Both A and R are true and R explains A. (b) Both A and R are true but R does not explain A. (c) A is true but R is false. (d) A is false but R is true.

1. Two particles lie on the x-axis, one at x = 0 and one at x = 4 m (or 5 m in D). Match each pair with the position of its COM.

  • List I: A. 1 kg at 0, 3 kg at 4 m; B. 2 kg at 0, 2 kg at 4 m; C. 3 kg at 0, 1 kg at 4 m; D. 1 kg at 0, 4 kg at 5 m

  • List II: (i) 1 m; (ii) 4 m; (iii) 3 m; (iv) 2 m

(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-iv, C-i, D-ii (d) A-i, B-iv, C-iii, D-ii

2. Each body rolls without slipping. Match it with the fraction of its KE that is translational.

  • List I: A. Solid sphere; B. Disc; C. Ring; D. Hollow sphere

  • List II: (i) 2/3; (ii) 5/7; (iii) 3/5; (iv) 1/2

(a) A-ii, B-i, C-iv, D-iii (b) A-i, B-ii, C-iv, D-iii (c) A-ii, B-iii, C-iv, D-i (d) A-iii, B-i, C-iv, D-ii

3. Match each result with the condition it needs.

  • List I: A. Conservation of angular momentum; B. Conservation of linear momentum; C. Conservation of mechanical energy for a body rolling down an incline; D. Constant angular acceleration

  • List II: (i) zero net external torque; (ii) constant net torque on a body of fixed MI; (iii) zero net external force; (iv) pure rolling with only static friction acting

(a) A-iii, B-i, C-iv, D-ii (b) A-i, B-iii, C-ii, D-iv (c) A-i, B-iv, C-iii, D-ii (d) A-i, B-iii, C-iv, D-ii

4. Each body has mass 1 kg. Match each with its MI.

  • List I: A. Rod of length 1.2 m, perpendicular axis through its centre; B. Same rod, perpendicular axis through one end; C. Disc of radius 0.6 m, about a diameter; D. Ring of radius 0.6 m, about a diameter

  • List II: (i) 0.18 kg m²; (ii) 0.12 kg m²; (iii) 0.09 kg m²; (iv) 0.48 kg m²

(a) A-ii, B-iv, C-i, D-iii (b) A-ii, B-iv, C-iii, D-i (c) A-iv, B-ii, C-iii, D-i (d) A-iii, B-iv, C-ii, D-i

5. How many of the following statements are correct?

  • A. The COM of a body can lie outside its material.

  • B. Internal forces can change the motion of the COM of a system.

  • C. After a shell bursts in mid-air, its COM continues on the original parabola until a fragment lands.

  • D. The COM of a uniform triangular plate is at its centroid.

  • E. The COM and the centre of gravity always coincide, however large the body.

(a) 2 (b) 3 (c) 4 (d) 5

6. Choose the correct set of statements.

  • A. A body in equilibrium can be moving.

  • B. If the net force is zero, the net torque is the same about every point.

  • C. A couple has a non-zero resultant force.

  • D. In equilibrium, the net torque about any point is zero.

(a) A and C only (b) B, C and D only (c) A, B and D only (d) A and D only

7. How many of the following statements are correct?

  • A. For a rigid body turning about a fixed axis, L = Iω.

  • B. A ring and a disc of the same mass rolling at the same speed have equal KE.

  • C. Net external torque equals the rate of change of angular momentum.

  • D. A diver tucks her body to spin faster.

(a) 3 (b) 1 (c) 2 (d) 4

8. Choose the correct set of statements.

  • A. The perpendicular axis theorem holds for flat bodies.

  • B. The MI of a solid sphere about a tangent is 7MR²/5.

  • C. The MI of a disc about a diameter is MR²/4.

  • D. The parallel axis theorem holds only for flat bodies.

(a) A, B and C only (b) A and D only (c) B, C and D only (d) A, B, C and D

9. A wheel with I = 2 kg m² starts from rest. A graph of the torque on it (y-axis) against time (x-axis) is a flat line at 4 N m from t = 0 to t = 3 s and zero after that. Its angular speed at t = 5 s is

(a) 10 rad/s (b) 6 rad/s (c) 12 rad/s (d) 3 rad/s

10. For a flywheel, a graph of rotational KE (y-axis) against ω² (x-axis) is a straight line through the origin with slope 3 J s². Its MI is

(a) 1.5 kg m² (b) 3 kg m² (c) 9 kg m² (d) 6 kg m²

11. Four bodies roll from rest without slipping down from a height of 1.4 m. The table gives their speeds at the bottom.

BodySpeed at bottom (m/s)
P4.47
Q3.74
R4.32
S4.10

Which body is the disc?

(a) P (b) Q (c) S (d) R

12. A 4 m seesaw is pivoted at its centre. A 25 kg child sits 1.6 m to the left of the pivot. How far to the right must a 40 kg child sit to balance it?

(a) 1.0 m (b) 2.56 m (c) 0.8 m (d) 1.6 m

13. Assertion (A): A rolling solid sphere keeps a smaller fraction of its KE as rotation than a rolling ring does. Reason (R): The solid sphere has the smaller value of k²/R².

14. Assertion (A): When a man on a freely rotating platform walks towards the centre, the platform's angular speed increases. Reason (R): The man's own angular momentum stays constant.

15. Assertion (A): For a body rolling down an incline without slipping, mechanical energy is conserved. Reason (R): A static friction force acts on the body.

16. Assertion (A): The MI of a body has the same value about every axis. Reason (R): MI depends on the mass of the body.

Passage for Q17–18: A yo-yo is treated as a uniform disc of mass 0.2 kg and radius 0.05 m. Its string is wound on the rim. The top end of the string is held still, and the yo-yo falls, unwinding without slipping.

17. The acceleration of the yo-yo is

(a) 10 m/s² (b) 5 m/s² (c) 6.67 m/s² (d) 3.33 m/s²

18. The tension in the string is

(a) 0.67 N (b) 1.33 N (c) 2 N (d) 1 N

Passage for Q19–20: A skater spins at 2 rev/s with arms out, when her MI is 3.6 kg m². She pulls her arms in, and her MI drops to 1.2 kg m². Ice friction is negligible.

19. Her new rate of spin is

(a) 0.67 rev/s (b) 4 rev/s (c) 3.46 rev/s (d) 6 rev/s

20. Her final KE divided by her initial KE is

(a) 3 (b) 1 (c) 9 (d) 1/3

21. A 2 kg particle moves east at 5 m/s and a 3 kg particle moves west at 5 m/s. The velocity of their COM is

(a) 1 m/s east (b) zero (c) 1 m/s west (d) 5 m/s west

22. A force F = (2î + 3ĵ) N acts at r = (î − ĵ) m. The torque about the origin is

(a) −1 k̂ N m (b) 5 k̂ N m (c) −5 k̂ N m (d) 1 k̂ N m

23. A flywheel of MI 2 kg m² speeds up from 10 rad/s to 30 rad/s in 4 s. The work done on it is

(a) 400 J (b) 900 J (c) 200 J (d) 800 J

24. A uniform rod of mass 2 kg and length 1 m turns at 6 rad/s about a perpendicular axis through one end. Its angular momentum is

(a) 4 kg m²/s (b) 1 kg m²/s (c) 12 kg m²/s (d) 2 kg m²/s

25. A disc rolls without slipping with total KE 30 J. Its rotational KE is

(a) 15 J (b) 20 J (c) 10 J (d) 7.5 J

26. A graph of angular momentum L (y-axis) against ω (x-axis) is drawn for bodies A and B. Both are straight lines through the origin, with slopes 2 kg m² for A and 5 kg m² for B. If both have the same angular momentum, K_A : K_B is

(a) 2 : 5 (b) 5 : 2 (c) 4 : 25 (d) 25 : 4

27. Bodies roll from rest without slipping down inclines. How many of the following statements are correct?

  • A. Among the standard shapes, the ring takes the longest time down a given incline.

  • B. Two solid spheres of different sizes reach the bottom of the same incline together.

  • C. For a given body, the speed at the bottom depends only on the height, not on the angle.

  • D. For a given body and height, the time taken does not depend on the angle of the incline.

(a) 1 (b) 3 (c) 2 (d) 4

28. A uniform disc of radius 0.1 m spins at 30 rad/s about its axis. It is lowered gently onto a rough floor, standing on its rim with its axis horizontal and no initial forward speed. When it starts pure rolling, its centre moves at

(a) 3 m/s (b) 1.5 m/s (c) 2 m/s (d) 1 m/s

29. A uniform rod of length 1.5 m is hinged at one end and released from rest in a horizontal position. Its angular speed when it has swung 30° below the horizontal is about

(a) 3.16 rad/s (b) 4.47 rad/s (c) 2.24 rad/s (d) 1.58 rad/s

30. A solid sphere rolling without slipping at 7 m/s reaches the foot of a 30° rough incline and rolls up it. The distance it travels up the incline before stopping is about

(a) 4.9 m (b) 3.43 m (c) 6.86 m (d) 9.8 m

Mock Test 2 answer key

QAnsReason
1cx_cm = 12/4 = 3, 8/4 = 2, 4/4 = 1, 20/5 = 4 m
2aTranslational share 1/(1 + β): 5/7, 2/3, 1/2, 3/5
3dL needs zero torque; p needs zero force; rolling energy needs no slipping; constant α needs constant τ on fixed I
4bML²/12 = 0.12; ML²/3 = 0.48; MR²/4 = 0.09; MR²/2 = 0.18 kg m²
5bA, C, D true; internal forces cancel; COM and CG differ in non-uniform g
6cA couple has zero resultant force
7aA, C, D true; ring KE Mv² exceeds disc KE (3/4)Mv²
8aThe parallel axis theorem holds for any body
9bAngular impulse 4 × 3 = 12 = Iω, ω = 6 rad/s; no torque after 3 s
10dK = ½Iω², slope I/2 = 3, I = 6 kg m²
11dv = √(28/(1 + β)); β = 1/2 gives 4.32 m/s
12a25 × 1.6 = 40 × x, x = 1.0 m
13aRotational share β/(1 + β) grows with β; 2/7 for the sphere, 1/2 for the ring
14cOnly the total L of man + platform is conserved; his own L changes
15bBoth true, but energy is conserved because static friction does no work, not just because it acts
16dMI changes with the axis; R is true
17ca = g/(1 + 1/2) = 6.67 m/s²
18aT = m(g − a) = 0.2 × 3.33 = 0.67 N (= mg/3)
19d3.6 × 2 = 1.2 × n, n = 6 rev/s
20aK = L²/(2I), so K₂/K₁ = I₁/I₂ = 3
21c(10 − 15)/5 = −1 m/s, i.e. 1 m/s west
22bτ_z = xF_y − yF_x = 1 × 3 − (−1) × 2 = 5
23d½ × 2 × (900 − 100) = 800 J
24aI = ML²/3 = 2/3; L = (2/3) × 6 = 4 kg m²/s
25cDisc keeps 1/3 of rolling KE as rotation: 10 J
26bSlope = I; K = L²/(2I), so K_A/K_B = I_B/I_A = 5/2
27bA, B, C true; time grows as the incline gets shallower
28dL about the contact point is conserved: ½MR²ω₀ = (3/2)MRv, v = ω₀R/3 = 1 m/s
29aCOM drops (L/2) sin 30° = L/4; ½(ML²/3)ω² = MgL/4 gives ω² = 3g/(2L) = 10
30ch = v²(1 + 2/5)/(2g) = 3.43 m; distance = h/sin 30° = 6.86 m
16 min left
‹
›