Chapter 7: Rolling Motion
A rolling wheel both moves forward and spins. Rolling without slipping ties the two together through v = Rω. NEET asks often about the speeds of points on a rolling body, its kinetic energy, and which body wins a race down a slope.
What you will learn
Rolling as translation plus rotation, and the condition v_cm = Rω.
Velocities of the contact point, centre, top and side of a rolling body.
Kinetic energy of rolling and how it splits between translation and rotation.
Speed, acceleration and time for bodies rolling down an incline, and the friction needed.
Why a solid sphere beats a ring down any slope.
7.1 Rolling without slipping
Think of an auto-rickshaw tyre on a dry road. In one full turn, the tyre lays down its whole rim on the road, so the centre moves forward by 2πR. That is rolling without slipping. Dividing by the time for one turn:
The motion is the sum of two parts:
translation: every point moves forward at v_cm;
rotation about the centre: each rim point moves at Rω = v_cm along the tangent.
Add them point by point:
| Point on the rim | From translation | From rotation | Net velocity |
|---|---|---|---|
| Bottom (contact point P) | v forward | v backward | 0 |
| Centre O | v forward | 0 | v forward |
| Top | v forward | v forward | 2v forward |
| Side, level with centre | v forward | v vertical | √2 v at 45° |

Every velocity is perpendicular to the dashed line joining its point to P, and its size grows with that distance, as for pure rotation about P.
The contact point is at rest for an instant. So the whole body is, at that instant, turning about the contact point with angular speed ω. This is the instantaneous axis of rotation. The speed of any point equals ω times its distance from P, and its velocity is perpendicular to the line joining it to P.
If v_cm > Rω, the wheel skids forward (like braking hard on a wet road). If v_cm < Rω, it spins in place (like a scooter wheel on mud). Both are slipping.
7.2 Kinetic energy of rolling
The total KE is the KE of the COM moving plus the KE of spinning about the COM:
Put I_cm = Mk² and ω = v/R:
The same result comes from treating the motion as pure rotation about P: K = ½I_Pω² with I_P = I_cm + MR².
The ratio k²/R² decides everything in this chapter. Call it β.
| Body | k²/R² (β) | Total KE | K_rot : K_trans | K_rot / K_total |
|---|---|---|---|---|
| Ring, hollow cylinder | 1 | Mv² | 1 : 1 | 1/2 |
| Hollow sphere | 2/3 | (5/6)Mv² | 2 : 3 | 2/5 |
| Disc, solid cylinder | 1/2 | (3/4)Mv² | 1 : 2 | 1/3 |
| Solid sphere | 2/5 | (7/10)Mv² | 2 : 5 | 2/7 |
7.3 Rolling down an incline
A body of mass M rolls from rest without slipping down an incline of angle θ. It drops a height h while moving a distance l = h/sin θ along the slope.
Energy method. The contact point is at rest, so static friction does no work. Mechanical energy is conserved:
Force method. Along the slope, Mg sin θ − f = Ma. Friction f gives the torque about the centre: fR = Iα = Mk²(a/R), so f = Mβa. Adding these:
The time to roll the length l from rest is
Friction must not exceed its limit μMg cos θ. So pure rolling needs
| Body | Acceleration down slope | Speed after drop h | Least μ for pure rolling |
|---|---|---|---|
| Solid sphere | (5/7) g sin θ | √(10gh/7) | (2/7) tan θ |
| Disc, solid cylinder | (2/3) g sin θ | √(4gh/3) | (1/3) tan θ |
| Hollow sphere | (3/5) g sin θ | √(6gh/5) | (2/5) tan θ |
| Ring, hollow cylinder | (1/2) g sin θ | √(gh) | (1/2) tan θ |
| Block sliding, no friction | g sin θ | √(2gh) | not rolling |
Key conclusions:
The smaller β is, the less energy goes into spin, so the faster the body moves. Race order from first to last: solid sphere, disc (or solid cylinder), hollow sphere, ring.
Mass and radius cancel out. A small marble and a large steel ball, both solid spheres, reach the bottom together.
A frictionless sliding block beats every rolling body, because none of its energy goes into rotation.
On a frictionless incline, a body cannot start rolling. It slides with a = g sin θ and no spin.
Rolling up a slope works the same way in reverse. A body rolling at v climbs to a height h = v²(1 + β)/2g before stopping. The rotational KE also turns into height, so a rolling ball climbs higher than a sliding block with the same speed.
7.4 Rolling on a level surface
A body rolling at constant speed on a level floor needs no friction. Nothing tries to change v or ω, so static friction is zero. In real life, a small rolling resistance from the deformation of the tyre and road slows it down. That is why a rolling cricket ball on the outfield eventually stops.
To stop a rolling body you must remove all its KE, both translational and rotational. For a ring that is Mv², twice the KE of a sliding block of the same mass and speed.
Worked example 7.1: A cycle wheel of radius 35 cm rolls without slipping at 5 m/s. Find its angular speed and the speeds of its top and bottom points.
Solution: ω = v/R = 5/0.35 ≈ 14.3 rad/s. Top: 2v = 10 m/s. Bottom (contact): 0.
Worked example 7.2: A 2 kg disc rolls at 4 m/s. Find its translational, rotational and total KE.
Solution: K_trans = ½ × 2 × 16 = 16 J. K_rot = ½ × (½ × 2 × R²) × (16/R²) = 8 J. Total = 24 J, which matches (3/4)Mv² = 0.75 × 2 × 16 = 24 J.
Worked example 7.3: A solid ball rolls from rest down a ramp of height 1.4 m. Find its speed at the bottom.
Solution: v = √(10gh/7) = √(10 × 10 × 1.4/7) = √20 ≈ 4.47 m/s. A frictionless sliding block would reach √(2gh) = √28 ≈ 5.29 m/s.
Worked example 7.4: A ring rolls down a 30° incline. Find its acceleration.
Solution: a = g sin θ/(1 + 1) = 10 × 0.5/2 = 2.5 m/s².
Worked example 7.5: A solid sphere and a ring are released together from rest at the top of the same incline. Which reaches the bottom first, and what is the ratio of their times?
Solution: t ∝ √(1 + β). Sphere: √(7/5). Ring: √2. So t_sphere/t_ring = √(7/10) ≈ 0.84. The sphere wins.
Worked example 7.6: Find the least coefficient of friction for a solid cylinder to roll without slipping on a 37° incline (tan 37° = 0.75).
Solution: μ_min = (β/(1 + β)) tan θ = (1/3) × 0.75 = 0.25.
Worked example 7.7: How much work is needed to stop a 2 kg ring rolling at 3 m/s?
Solution: Total KE of a rolling ring = Mv² = 2 × 9 = 18 J. So 18 J of work must be done against it.
Worked example 7.8: A round body rolls from rest without slipping down a slope, dropping 5 m. Its speed at the bottom is √60 ≈ 7.75 m/s. Identify the body.
Solution: v² = 2gh/(1 + β) gives 60 = 100/(1 + β). So 1 + β = 5/3 and β = 2/3. That is a thin hollow sphere.
Quick revision
Rolling without slipping: v_cm = Rω, a_cm = Rα.
Speeds on the rim: contact 0, centre v, top 2v, side √2 v.
The contact point is the instantaneous axis; speed of any point = ω × distance from P.
K = ½Mv²(1 + β), β = k²/R²: ring 1, hollow sphere 2/3, disc 1/2, solid sphere 2/5.
Incline: a = g sin θ/(1 + β), v = √(2gh/(1 + β)), μ_min = β tan θ/(1 + β).
Race order: solid sphere, disc, hollow sphere, ring. Mass and radius do not matter.
Static friction does no work in pure rolling on a fixed surface.
NEET traps
Writing the KE of a rolling body as only ½Mv².
Saying the contact point moves at v. It is momentarily at rest.
Thinking a heavier or larger ball of the same shape rolls down faster.
Using the friction force to reduce mechanical energy in pure rolling. It does no work.
Confusing K_rot : K_trans with K_rot : K_total. For a disc they are 1 : 2 and 1 : 3.
Assuming friction always points up the slope. It does when rolling down, but on a level floor at constant speed it is zero.
Practice MCQs: Chapter 7
Level 1: Concept check
1. For a wheel rolling without slipping at speed v, the velocity of the point touching the ground is (a) v (b) 2v (c) zero (d) v/2
2. For the same wheel, the velocity of its topmost point is (a) 2v (b) v (c) zero (d) √2 v
3. The condition for rolling without slipping is (a) v = ω/R (b) v = Rω (c) v = 2Rω (d) v = R²ω
4. The total KE of a ring of mass M rolling at speed v is (a) ½Mv² (b) (3/4)Mv² (c) Mv² (d) (7/10)Mv²
5. A ring, a disc, a hollow sphere and a solid sphere roll from rest down the same incline. Which reaches the bottom first? (a) Ring (b) Disc (c) Hollow sphere (d) Solid sphere
6. The work done by static friction on a body rolling without slipping down a fixed incline is (a) zero (b) positive (c) negative (d) dependent on its mass
7. For a disc rolling without slipping, K_rot : K_trans is (a) 1 : 1 (b) 1 : 2 (c) 2 : 5 (d) 2 : 3
8. The acceleration of a solid sphere rolling down an incline of angle θ is (a) g sin θ (b) (1/2) g sin θ (c) (2/3) g sin θ (d) (5/7) g sin θ
9. The time a body takes to roll down an incline from rest does NOT depend on its (a) angle of incline (b) ratio k/R (c) length of incline (d) mass and radius
10. The total KE of a solid sphere of mass M rolling at speed v is (a) (7/10)Mv² (b) ½Mv² (c) (5/6)Mv² (d) (3/4)Mv²
Level 2: NEET standard
11. A wheel of radius 0.4 m rolls without slipping at 8 m/s. Its angular speed is (a) 3.2 rad/s (b) 10 rad/s (c) 20 rad/s (d) 40 rad/s
12. A 4 kg disc rolls at 3 m/s. Its total KE is (a) 18 J (b) 27 J (c) 36 J (d) 9 J
13. A solid cylinder rolls from rest down a slope, dropping 3 m. Its speed at the bottom is about (a) 7.75 m/s (b) 5.48 m/s (c) 6.32 m/s (d) 6.55 m/s
14. A disc rolls down a 30° incline. Its acceleration is about (a) 3.33 m/s² (b) 5 m/s² (c) 2.5 m/s² (d) 3.57 m/s²
15. For a thin hollow sphere rolling without slipping, the fraction of its KE that is rotational is (a) 2/7 (b) 1/3 (c) 1/2 (d) 2/5
16. A wheel rolls without slipping at speed v. A point on its rim level with its centre has speed (a) v (b) √2 v (c) 2v (d) zero
17. A ring and a disc of the same mass and radius roll from rest down the same incline. The ratio of their speeds at the bottom, v_ring/v_disc, is (a) √3/2 (b) 2/√3 (c) 1 (d) 3/4
18. The least coefficient of friction for a ring to roll without slipping on a 45° incline is (a) 0.25 (b) 0.33 (c) 0.5 (d) 1
19. For a body rolling without slipping, K_rot/K_total = 2/7. The body is a (a) ring (b) solid sphere (c) disc (d) hollow sphere
20. A solid ball rolls at 7 m/s on level ground and then rolls up a slope. The greatest height it reaches is about (a) 2.45 m (b) 4.9 m (c) 3.0 m (d) 3.43 m
21. The work needed to stop a 3 kg ring rolling at 2 m/s is (a) 6 J (b) 12 J (c) 9 J (d) 24 J
22. A rolling solid sphere has total KE 70 J. Its rotational KE is (a) 20 J (b) 28 J (c) 35 J (d) 50 J
Level 3: Challenge
23. A body rolls from rest without slipping down a slope, dropping 5 m, and reaches √60 m/s at the bottom. The body is a (a) ring (b) disc (c) solid sphere (d) hollow sphere
24. A solid sphere and a ring roll from rest down the same incline. The ratio of their times, t_sphere/t_ring, is (a) √(7/10) (b) √(10/7) (c) 7/10 (d) √(5/7)
25. A 6 kg solid cylinder rolls without slipping down a 30° incline. The friction force on it is (a) 5 N (b) 10 N (c) 15 N (d) 20 N
26. A disc rolls without slipping on a level floor. The ratio of the speed of its topmost point to that of a rim point level with its centre is (a) 2 : 1 (b) 1 : 1 (c) 1 : √2 (d) √2 : 1
27. The coefficient of friction between a solid cylinder and an incline is 0.1. The steepest incline on which it can roll without slipping has angle (a) tan⁻¹(0.1) (b) tan⁻¹(0.2) (c) tan⁻¹(0.3) (d) tan⁻¹(0.15)
28. A thin hollow sphere rolls at 6 m/s onto a 30° incline and rolls up without slipping. The distance it travels along the incline before stopping is (a) 3 m (b) 3.6 m (c) 6 m (d) 7.2 m
29. Assertion (A): A solid sphere released from rest reaches the bottom of an incline before a hollow sphere of the same mass and radius, both rolling without slipping. Reason (R): The solid sphere has a smaller k²/R², so a smaller share of its energy goes into rotation. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: For a body rolling without slipping on a fixed surface, static friction does no work. Statement II: A body rolling without slipping at constant speed on a level floor needs a friction force to keep it rolling. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | c | v − Rω = 0 |
| 2 | a | v + Rω = 2v |
| 3 | b | Rim laid down equals distance moved |
| 4 | c | ½Mv²(1 + 1) |
| 5 | d | Smallest β = 2/5 |
| 6 | a | Contact point is at rest |
| 7 | b | β = 1/2 |
| 8 | d | g sin θ/(1 + 2/5) |
| 9 | d | M and R cancel; only β matters |
| 10 | a | ½Mv²(1 + 2/5) |
| 11 | c | 8/0.4 |
| 12 | b | (3/4) × 4 × 9 |
| 13 | c | √(4gh/3) = √40 |
| 14 | a | (2/3) × 10 × 0.5 |
| 15 | d | (2/3)/(5/3) |
| 16 | b | v forward plus v vertical |
| 17 | a | √[(1 + 1/2)/(1 + 1)] |
| 18 | c | (1/2) tan 45° |
| 19 | b | (2/5)/(7/5) = 2/7 |
| 20 | d | h = v²(1 + 2/5)/2g = 49 × 1.4/20 |
| 21 | b | Mv² = 3 × 4 |
| 22 | a | 2/7 of 70 J |
| 23 | d | 100/(1 + β) = 60 gives β = 2/3 |
| 24 | a | t ∝ √(1 + β): √(7/5)/√2 |
| 25 | b | (1/3) × 60 × 0.5 |
| 26 | d | 2v : √2 v |
| 27 | c | tan θ ≤ 3μ |
| 28 | c | h = 36 × (5/3)/20 = 3 m; l = h/sin 30° |
| 29 | a | Less spin energy means more speed |
| 30 | c | No tendency to slip on a level floor, so no friction |
Chapter 7 revision sheet
One-page summary
Rolling without slipping: v_cm = Rω and a_cm = Rα. The contact point is at rest for that instant.
Rolling = translation of the COM + rotation about the COM. Velocity of any point = v_cm + (ω × r from the centre).
Top point moves at 2v_cm; centre at v_cm; contact point at 0; ends of the horizontal diameter at √2 v_cm.
Equivalent view: pure rotation about the contact point with the same ω. Speed of a point = ω × its distance from the contact point.
Total KE: K = ½Mv²(1 + k²/R²). Call β = k²/R²: ring 1, disc 1/2, solid sphere 2/5, hollow sphere 2/3.
Fraction of KE that is rotational = β/(1 + β): ring 1/2, disc 1/3, solid sphere 2/7, hollow sphere 2/5.
Down an incline from rest through height h: v = √(2gh/(1 + β)); a = g sin θ/(1 + β); t ∝ √(1 + β).
Smaller β wins the race: solid sphere, then disc, then hollow sphere, then ring. Mass and radius do not matter.
Static friction acts up the incline and makes rolling possible: f = Mg sin θ × β/(1 + β).
Least μ for rolling: μ_min = (β/(1 + β)) tan θ. On a frictionless incline a body released from rest slides without spinning.
In pure rolling on a fixed surface, static friction does no work, so mechanical energy is conserved.
Rolling up an incline: maximum height h = v²(1 + β)/(2g).
A horizontal force F at the centre of a rolling body gives a = F/(M(1 + β)), with friction Fβ/(1 + β) acting backward.
Must-remember table
| Body | β = k²/R² | K_total | K_rot/K_total | a down incline | μ_min |
|---|---|---|---|---|---|
| Ring / hollow cylinder | 1 | Mv² | 1/2 | (1/2) g sin θ | (1/2) tan θ |
| Hollow sphere | 2/3 | (5/6) Mv² | 2/5 | (3/5) g sin θ | (2/5) tan θ |
| Disc / solid cylinder | 1/2 | (3/4) Mv² | 1/3 | (2/3) g sin θ | (1/3) tan θ |
| Solid sphere | 2/5 | (7/10) Mv² | 2/7 | (5/7) g sin θ | (2/7) tan θ |
Memory aids
"Solid Disc Hollow Ring" ("Sachin Does Hit Runs"): the finishing order down an incline: solid sphere, disc, hollow sphere, ring.
"2-1-0 on the wheel": top 2v, centre 1v, bottom 0.
"Beta in the basement": β always sits in the denominator as (1 + β) for a, v² and in the friction fraction.
"Friction helps but never pays": static friction in pure rolling does zero work.
"5-7 for the sphere": a solid sphere's incline acceleration is (5/7) g sin θ.
Concept connections
Static and kinetic friction come from Physics Book 3: Laws of Motion; here static friction supplies the torque.
Energy conservation with rotational KE extends Physics Book 4: Work, Energy and Power.
Relative velocity of points on a wheel uses vector addition from Physics Book 2: Kinematics.
Practice MCQs: Chapter 7, Level 4 (new NEET pattern)
31. Each body rolls without slipping. Match it with the fraction of its KE that is rotational.
List I: A. Ring; B. Disc; C. Solid sphere; D. Hollow sphere
List II: (i) 2/7; (ii) 1/2; (iii) 2/5; (iv) 1/3
(a) A-ii, B-iii, C-i, D-iv (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-iv, C-iii, D-i (d) A-ii, B-iv, C-i, D-iii
32. Each body rolls down an incline of angle θ without slipping. Match it with its acceleration as a multiple of g sin θ.
List I: A. Ring; B. Disc; C. Solid sphere; D. Hollow sphere
List II: (i) 3/5; (ii) 5/7; (iii) 1/2; (iv) 2/3
(a) A-iii, B-iv, C-ii, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-iii, B-ii, C-iv, D-i (d) A-iii, B-iv, C-i, D-ii
33. A wheel rolls without slipping with centre speed v. Match each point with its speed relative to the ground.
List I: A. Top of the rim; B. Point in contact with the ground; C. Centre; D. End of the horizontal diameter
List II: (i) √2 v; (ii) 0; (iii) 2v; (iv) v
(a) A-iii, B-ii, C-i, D-iv (b) A-iv, B-ii, C-iii, D-i (c) A-iii, B-ii, C-iv, D-i (d) A-i, B-ii, C-iv, D-iii
34. Each body has mass 2 kg and rolls at v_cm = 3 m/s. Match it with its total KE.
List I: A. Ring; B. Disc; C. Solid sphere; D. Hollow sphere
List II: (i) 13.5 J; (ii) 18 J; (iii) 15 J; (iv) 12.6 J
(a) A-ii, B-i, C-iv, D-iii (b) A-ii, B-iii, C-iv, D-i (c) A-iii, B-i, C-iv, D-ii (d) A-ii, B-i, C-iii, D-iv
35. How many of the following statements are correct?
A. In pure rolling, the contact point is at rest for that instant.
B. Static friction does work on a body rolling without slipping on a fixed surface.
C. A solid sphere reaches the bottom of an incline before a ring of the same mass and radius.
D. The acceleration of a rolling body down an incline depends on its mass.
E. A body released from rest on a frictionless incline cannot roll; it only slides.
(a) 2 (b) 4 (c) 3 (d) 1
36. A solid cylinder rolls without slipping down an incline of angle θ. Choose the correct set of statements.
A. Its acceleration is (2/3) g sin θ.
B. The friction force on it is (1/3) Mg sin θ.
C. The least coefficient of friction needed is (2/3) tan θ.
D. Friction on it acts down the incline.
(a) A, B and C only (b) A and D only (c) A and B only (d) B and C only
37. For a wheel rolling without slipping, how many of the following statements are correct?
A. The top point moves at 2v_cm.
B. All points on the rim have the same speed relative to the ground.
C. The motion can be treated as pure rotation about the contact point with ω = v_cm/R.
D. The speed of any point is proportional to its distance from the contact point.
E. Relative to the centre, the top point moves forward at v_cm.
(a) 3 (b) 4 (c) 5 (d) 2
38. A disc and a ring of the same mass and radius are released together from the same height on an incline. Both roll without slipping. Choose the correct set of statements.
A. The disc reaches the bottom first.
B. Both have the same total KE at the bottom.
C. The ring has the larger speed at the bottom.
D. The ring has the larger share of its KE as rotational KE.
(a) A, B and D only (b) A and C only (c) B, C and D only (d) A and B only
39. A body rolls from rest down a 30° incline. Take g = 10 m/s². Its v–t graph is a straight line through the origin and through the point (7 s, 25 m/s). The body is a
(a) ring (b) disc (c) solid sphere (d) hollow sphere
40. Four bodies are released together from the top of the same incline and roll without slipping. The table gives k²/R² for each.
| Body | k²/R² |
|---|---|
| P | 1 |
| Q | 0.5 |
| R | 0.4 |
| S | 0.667 |
The order in which they reach the bottom, first to last, is
(a) P, S, Q, R (b) R, Q, S, P (c) R, S, Q, P (d) Q, R, S, P
41. For a 2 kg body rolling without slipping, a graph of total KE (y-axis) against v_cm² (x-axis) is a straight line through the origin with slope 1.4 kg. The body is a
(a) solid sphere (b) disc (c) hollow sphere (d) ring
Passage for Q42–43: A 2 kg solid ball of radius 0.1 m rolls without slipping on a level floor at 5 m/s. It then rolls up a rough ramp without slipping. Take g = 10 m/s².
42. The total KE of the ball on the floor is
(a) 25 J (b) 35 J (c) 30 J (d) 50 J
43. The greatest height the ball reaches on the ramp is
(a) 1.25 m (b) 2.5 m (c) 1.75 m (d) 1.5 m
44. A solid sphere and a ring are released from rest on the same incline and roll without slipping over the same distance. The ratio of their times, t_sphere/t_ring, is
(a) √(7/10) (b) 7/10 (c) √(10/7) (d) √(5/7)
45. A 4 kg uniform solid cylinder lies on a rough horizontal floor. A horizontal force of 12 N is applied at its axle, and it rolls without slipping. Its acceleration and the friction force on it are
(a) 3 m/s², zero (b) 2 m/s², 4 N forward (c) 1 m/s², 8 N backward (d) 2 m/s², 4 N backward
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | d | β/(1 + β): ring 1/2, disc 1/3, solid sphere 2/7, hollow sphere 2/5 |
| 32 | a | 1/(1 + β): ring 1/2, disc 2/3, solid sphere 5/7, hollow sphere 3/5 |
| 33 | c | Top 2v, contact 0, centre v, side points √(v² + v²) = √2 v |
| 34 | a | ½Mv²(1 + β) with ½Mv² = 9 J: 18, 13.5, 12.6, 15 J |
| 35 | c | A, C, E true; static friction does no work; a does not depend on mass |
| 36 | c | μ_min = (1/3) tan θ; friction acts up the incline |
| 37 | b | A, C, D, E true; rim points have different speeds (0 to 2v) |
| 38 | a | Same mgh means same total KE; disc has smaller β, so larger v and arrives first; ring's rotational share 1/2 beats 1/3 |
| 39 | c | a = 25/7 m/s² = (5/7)(10 × 0.5), so β = 2/5 |
| 40 | b | Time grows with √(1 + β): smallest β first |
| 41 | a | Slope = ½M(1 + β) = 1 + β = 1.4, so β = 0.4 |
| 42 | b | K = (7/10) × 2 × 25 = 35 J |
| 43 | c | Mgh = 35 J, h = 35/20 = 1.75 m |
| 44 | a | t ∝ √(1 + β): √(1.4/2) = √(7/10) ≈ 0.84 |
| 45 | d | a = F/(M × 1.5) = 2 m/s²; F − f = Ma gives f = 12 − 8 = 4 N, backward |