Chapter 2 of 11 · 5 min read

Exam Strategy

Rotational motion usually gives NEET about 2–3 questions a year, and they are often among the harder Physics numericals, so every mark here separates good ranks from average ones. Study it formula-first: learn the MI table and the rolling results cold, then practise until you can pick the right conservation law within 20 seconds.

Chapter weightage and priority

ChapterTypical NEET questionsPriorityWhy
1. Centre of Mass0–1MediumCOM of standard shapes, explosions and the man-on-boat problem come back often
2. Torque and Rotational Equilibrium0–1MediumTorque as r × F and simple beam or ladder balance appear as quick numericals
3. Moment of Inertia and Radius of Gyration0–1HighThe MI table feeds almost every other question in this unit
4. Parallel and Perpendicular Axes Theorems0–1HighMI about a tangent, an end or a corner is a favourite one-step question
5. Rotational Dynamics0–1Highτ = Iα with pulleys, ½Iω² and P = τω are standard scoring numericals
6. Angular Momentum and its Conservation0–1HighSkater, coupled discs and the energy-lost formula are asked again and again
7. Rolling Motion1–2HighRolling down an incline, KE ratios and "which body reaches first" are the most frequent questions of the unit

Weightage is approximate, based on recent papers; NEET can ask from any part of the syllabus.

High-yield topics

  • MI of standard bodies: a straight recall question, or the value used inside a rolling or pulley problem.

  • Parallel and perpendicular axes theorems: MI of a ring, disc or rod about a tangent, an end or a diameter.

  • Radius of gyration: k = √(I/M) for a ring, disc, sphere or rod; ratios between two bodies.

  • Rolling down an incline: acceleration, speed at the bottom, time taken, and the order in which bodies arrive.

  • KE split in rolling: ratio of rotational KE to total KE (ring 1/2, disc 1/3, solid sphere 2/7).

  • Conservation of angular momentum: skater, person on turntable, child jumping onto a merry-go-round; change in ω and in KE.

  • Coupled discs: common ω and KE lost = I₁I₂(ω₁ − ω₂)²/[2(I₁ + I₂)].

  • τ = Iα with a pulley: acceleration of a hanging block and the rope tension when the pulley has mass.

  • Rod hinged at one end: initial α = 3g/(2L) and ω at the vertical = √(3g/L).

  • Torque as a cross product: τ = r × F from vectors, and torque about a point that is not the origin.

  • COM of composite or cut bodies: a disc with a hole, a semicircular ring or disc, a hemisphere.

  • COM motion under internal forces: explosion of a shell in flight, man walking on a boat.

Question types to expect

TypeWhat it looks likeHow to approach
NumericalFind α, ω, a, v, MI or a COM coordinate from given dataWrite the one governing law first (τ = Iα, L conserved, energy conserved), then substitute in SI units
ConceptualWhich body reaches first, what happens to ω when arms are pulled inReduce to one ratio, such as k²/R² or I₁/I₂; never compute when a ratio settles it
Statement-based"How many of the following are correct?"Mark each statement T or F on paper; one wrong mark changes the count
Match the columnBodies with their MI, k or KE ratioFill the sure pairs first, then eliminate options that disagree with them
Assertion–reasonA is a result, R is a law or a causeCheck A and R separately, then ask whether R alone produces A
Graph or diagram basedτ–t, ω–t, L–t or I–d² graphs; a wheel with velocity arrowsArea under τ–t = change in L; slope of ω–t = α; slope of L–t = τ; slope of I–d² = M

Study plan

DayWhat to studyPractice target
1Chapter 1: Centre of MassWorked examples + Level 1–2 MCQs of Chapter 1
2Chapter 2: Torque and Rotational EquilibriumAll 30 MCQs of Chapter 2; redo every ladder question
3Chapters 3 and 4: MI, radius of gyration, theoremsWrite the MI table from memory twice; Level 1–3 of both chapters
4Chapter 5: Rotational DynamicsAll pulley and hinged-rod examples; 30 MCQs of Chapter 5
5Chapter 6: Angular MomentumSkater and coupled-disc problems; 30 MCQs of Chapter 6
6Chapter 7: Rolling MotionIncline table from memory; 30 MCQs of Chapter 7
7Full revisionUnit Test (50 min) + Level 4 sets of your two weakest chapters

Last 48 hours:

  • Day −2: read every chapter revision sheet and the Book-at-a-glance sheet; rewrite the MI and rolling tables from memory.

  • Day −1 morning: Mock Test 2 under time; list each mistake against the Common mistakes checklist.

  • Day −1 evening: only the 40 rapid-fire facts and your own error list; no new problems.

Time-saving tricks

  • Use β = k²/R². Ring 1, hollow sphere 2/3, disc or solid cylinder 1/2, solid sphere 2/5. Rolling acceleration = g sin θ/(1 + β), so the smaller β, the faster the body.

  • KE fraction in rolling: rotational share = β/(1 + β), translational share = 1/(1 + β). No need to write both energies.

  • Tangent axes in one line: ring ⟂ 2MR², ring in plane 3MR²/2, disc ⟂ 3MR²/2, disc in plane 5MR²/4, solid sphere 7MR²/5, hollow sphere 5MR²/3.

  • Pulley with mass: a = mg/(m + I/R²). For a disc pulley I/R² = M/2, for a ring pulley it is M.

  • Coupled discs, equal MI: final ω is the average, and exactly half of the initial KE (when one disc starts at rest) is lost.

  • Man on boat: boat shifts by mL/(m + M); you never need the time or speed.

  • Eliminate by dimensions and limits: an MI option without M × length² is wrong; a rolling speed option larger than √(2gh) is wrong.

  • Cut-out bodies: treat the hole as a negative mass and take moments about the centre.

5 min left
‹
›