Chapter 5: Rotational Dynamics
The central law of this chapter is τ = Iα. It is Newton's second law rewritten for rotation. With it, plus the rotational kinetic energy ½Iω², you can solve pulleys, fans, flywheels and falling rods in the same way you solved blocks and inclines.
What you will learn
The equations of rotational motion for constant angular acceleration.
How τ = Iα follows from Newton's second law.
Rotational kinetic energy, work done by a torque, and rotational power.
How to solve problems with pulleys of non-zero mass and hinged rods.
The full one-to-one comparison of linear and rotational motion.
5.1 Equations of rotational motion
For rotation about a fixed axis with constant angular acceleration α, the equations mirror those of linear motion:
The angle turned in the nth second is θₙ = ω₀ + α(n − ½), just like the distance in the nth second.
Convert units first. 1 rev = 2π rad, and N rpm = 2πN/60 rad/s. A ceiling fan at 300 rpm turns at 10π ≈ 31.4 rad/s.
A point at distance r from the axis has tangential acceleration a_t = rα and centripetal acceleration a_c = ω²r. Its total acceleration is √(a_t² + a_c²).
5.2 Torque and angular acceleration: τ = Iα
Take a rigid body rotating about a fixed axis. A particle of mass mᵢ at distance rᵢ has tangential acceleration rᵢα. Newton's law along the tangent gives Fᵢ = mᵢrᵢα. The torque of this force about the axis is
Add over all particles. Internal forces act in pairs along the line joining particles, so their torques cancel. Only external torques remain:
Compare F = ma. Torque replaces force, MI replaces mass, and angular acceleration replaces linear acceleration. The same torque gives a smaller α to a body with larger I.
This law holds about a fixed axis, or about an axis through the COM even when the COM accelerates. Use it about any other moving point only with care.
5.3 Rotational kinetic energy
Each particle of a rotating body has speed vᵢ = rᵢω. Its kinetic energy is ½mᵢrᵢ²ω². Adding up:
This is the energy stored in a spinning flywheel, a potter's wheel or a spinning top. Doubling ω makes it four times larger.
5.4 Work and power in rotation
A tangential force F turning a body through a small angle dθ moves its point of application by r dθ. The work done is F × r dθ = τ dθ. So
Dividing by dt gives the power:
The work-energy theorem for rotation reads W_net = ½Iω₂² − ½Iω₁². You can check it from τ = Iα: τ dθ = Iα dθ = Iω dω, and integrating gives the change in ½Iω².
P = τω explains gear boxes. An auto-rickshaw engine delivers a fixed power. In low gear, the wheels turn slowly with large torque, for climbing a slope. In high gear, they turn fast with small torque, for cruising.
5.5 Pulleys and hinged rods
Block hanging from a rope wound on a pulley. A block of mass m hangs from a light rope wound round a pulley of MI I and radius R, free to turn on a fixed axle. The rope does not slip, so a = Rα.

The same tension T slows the block and spins the pulley, so the pulley's MI acts like an extra mass I/R² in the denominator.
For the block: mg − T = ma. For the pulley: TR = Iα = Ia/R, so T = Ia/R². Adding:
For a disc pulley (I = MR²/2), a = mg/(m + M/2). For a ring pulley, a = mg/(m + M). The pulley's MI acts like an extra mass I/R² that must also be accelerated. If I = 0, a = g and T = 0, as for free fall.
In an Atwood machine with a massive pulley, the tensions on the two sides differ. Their difference supplies the pulley's torque:
Rod hinged at one end, released from horizontal. Take a uniform rod of mass M and length L. About the hinge, I = ML²/3 and the weight's torque is MgL/2. Just after release,
The free end then has acceleration αL = 3g/2, which is more than g. A coin placed at the free end gets left behind.
When the rod swings down to vertical, its COM has fallen L/2. Energy conservation gives MgL/2 = ½(ML²/3)ω², so
5.6 Linear and rotational motion compared
| Linear motion | Rotational motion (fixed axis) |
|---|---|
| Displacement x | Angular displacement θ |
| Velocity v = dx/dt | Angular velocity ω = dθ/dt |
| Acceleration a = dv/dt | Angular acceleration α = dω/dt |
| Mass m | Moment of inertia I |
| Force F | Torque τ |
| Newton's law F = ma | τ = Iα |
| Momentum p = mv | Angular momentum L = Iω |
| F = dp/dt | τ = dL/dt |
| Kinetic energy ½mv² | Kinetic energy ½Iω² |
| Work W = ∫F dx | Work W = ∫τ dθ |
| Power P = Fv | Power P = τω |
| v = u + at | ω = ω₀ + αt |
| s = ut + ½at² | θ = ω₀t + ½αt² |
| v² = u² + 2as | ω² = ω₀² + 2αθ |
| Impulse FΔt = Δp | Angular impulse τΔt = ΔL |
One difference matters. Mass is fixed for a body, but MI changes with the axis and with the body's shape.
Worked example 5.1: A ceiling fan starts from rest and reaches 600 rpm in 10 s with constant angular acceleration. Find α and the number of turns in that time.
Solution: ω = 600 × 2π/60 = 20π rad/s. α = 20π/10 = 2π ≈ 6.28 rad/s². θ = ½αt² = ½ × 2π × 100 = 100π rad = 50 revolutions.
Worked example 5.2: A net torque of 2 N m acts on a wheel of MI 0.5 kg m², starting from rest. Find its angular velocity after 3 s.
Solution: α = τ/I = 2/0.5 = 4 rad/s². ω = αt = 12 rad/s.
Worked example 5.3: A flywheel with MI 4 kg m² spins at 300 rpm. Find its kinetic energy.
Solution: ω = 300 × 2π/60 = 10π rad/s. K = ½ × 4 × (10π)² = 200π² ≈ 1974 J, about 2 kJ.
Worked example 5.4: A 2 kg bucket hangs from a rope wound on a well pulley, a uniform disc of mass 4 kg and radius 0.2 m. Find the bucket's acceleration, the rope tension and the pulley's angular acceleration.
Solution: a = mg/(m + M/2) = 20/(2 + 2) = 5 m/s². T = m(g − a) = 2 × 5 = 10 N. α = a/R = 5/0.2 = 25 rad/s². Check: TR = 10 × 0.2 = 2 N m and Iα = (½ × 4 × 0.04) × 25 = 2 N m.
Worked example 5.5: How much work is needed to spin a 5 kg disc of radius 0.4 m from rest to 20 rad/s about its central axis? If this takes 4 s, what is the average power?
Solution: I = ½ × 5 × 0.16 = 0.4 kg m². W = ½ × 0.4 × 400 = 80 J. Average power = 80/4 = 20 W.
Worked example 5.6: A motor delivers a torque of 50 N m at 1200 rpm. Find its power output.
Solution: ω = 1200 × 2π/60 = 40π rad/s. P = τω = 50 × 40π = 2000π ≈ 6.28 kW.
Worked example 5.7: A uniform rod 1.2 m long is hinged at one end and released from rest in a horizontal position. Find (i) its initial angular acceleration, (ii) its angular speed when vertical, (iii) the speed of its free end then.
Solution: (i) α = 3g/2L = 30/2.4 = 12.5 rad/s². (ii) ω = √(3g/L) = √(30/1.2) = √25 = 5 rad/s. (iii) v = ωL = 5 × 1.2 = 6 m/s.
Worked example 5.8: A wheel with MI 2 kg m² spins at 30 rad/s. A brake brings it to rest in 15 revolutions. Find the constant braking torque.
Solution: Initial KE = ½ × 2 × 900 = 900 J. Angle = 15 × 2π = 30π rad ≈ 94.25 rad. The brake's work equals the KE lost: τ × 30π = 900. So τ = 900/(30π) = 30/π ≈ 9.55 N m.
Quick revision
ω = ω₀ + αt, θ = ω₀t + ½αt², ω² = ω₀² + 2αθ; nth second: ω₀ + α(n − ½).
τ = Iα about a fixed axis or the COM axis.
K = ½Iω², W = ∫τ dθ, P = τω.
Block on pulley: a = mg/(m + I/R²); disc pulley a = mg/(m + M/2).
Hinged rod from horizontal: α = 3g/2L at release, ω = √(3g/L) at bottom.
N rpm = 2πN/60 rad/s.
NEET traps
Using rpm directly in formulas. Convert to rad/s first.
Assuming equal tensions on both sides of a pulley that has mass.
Forgetting the pulley's KE in energy problems; only mgh = ½mv² gives too large a speed.
Using I about the COM for a rod hinged at its end. Use ML²/3 about the hinge.
Thinking the free end of a released rod falls at g. It starts at 3g/2.
Counting revolutions as radians, or the reverse, in ω² = ω₀² + 2αθ.
Practice MCQs: Chapter 5
Level 1: Concept check
1. The rotational analogue of force is (a) moment of inertia (b) angular momentum (c) torque (d) angular velocity
2. The kinetic energy of a body rotating about a fixed axis is (a) Iω (b) ½Iω² (c) Iω² (d) ½I²ω
3. The power delivered by a torque τ to a body turning at ω is (a) τω (b) τ/ω (c) Iω (d) ½τω²
4. The SI unit of angular acceleration is (a) rad/s (b) rad s (c) rad/s² (d) rad²/s
5. If the net external torque on a rigid body about a fixed axis is zero, its angular velocity (a) increases (b) decreases (c) must be zero (d) stays constant
6. A wheel starts from rest with α = 3 rad/s². Its angular velocity after 4 s is (a) 7 rad/s (b) 12 rad/s (c) 24 rad/s (d) 48 rad/s
7. The rotational form of v² = u² + 2as is (a) ω = ω₀ + αt (b) θ = ω₀t + ½αt² (c) τ = Iα (d) ω² = ω₀² + 2αθ
8. A torque of 6 N m acts on a body of MI 2 kg m². Its angular acceleration is (a) 12 rad/s² (b) 0.33 rad/s² (c) 8 rad/s² (d) 3 rad/s²
9. A constant torque τ turns a body through angle θ. The work done is (a) τθ (b) τ/θ (c) ½τθ² (d) τω
10. The angular speed of a flywheel is doubled. Its rotational KE becomes (a) 2 times (b) √2 times (c) 4 times (d) 8 times
Level 2: NEET standard
11. A fan running at 1200 rpm is switched off and stops in 20 s with uniform deceleration. The number of turns it makes is (a) 100 (b) 200 (c) 400 (d) 600
12. A flywheel with MI 2 kg m² spins at 10 rad/s. Its KE is (a) 20 J (b) 50 J (c) 100 J (d) 200 J
13. A motor gives a torque of 20 N m at 300 rpm. Its power is about (a) 628 W (b) 6000 W (c) 314 W (d) 200 W
14. A 1 kg block hangs from a rope wound on a uniform disc pulley of mass 2 kg and radius 0.1 m. The block's acceleration is (a) 10 m/s² (b) 6.67 m/s² (c) 3.33 m/s² (d) 5 m/s²
15. In Q14, the rope tension is (a) 5 N (b) 10 N (c) 2.5 N (d) 6.67 N
16. A constant torque takes a wheel of MI 0.8 kg m² from rest to 50 rad/s in 10 s. The torque is (a) 2 N m (b) 4 N m (c) 5 N m (d) 40 N m
17. The work needed to raise the angular speed of a wheel of MI 0.5 kg m² from 10 rad/s to 20 rad/s is (a) 25 J (b) 50 J (c) 75 J (d) 100 J
18. A uniform rod 1.5 m long is hinged at one end and released from horizontal. Its initial angular acceleration is (a) 10 rad/s² (b) 6.67 rad/s² (c) 5 rad/s² (d) 20 rad/s²
19. For the rod in Q18, the angular speed as it passes the vertical is about (a) 2.58 rad/s (b) 3.16 rad/s (c) 4.47 rad/s (d) 6.32 rad/s
20. A ring and a disc of the same mass and radius spin at the same ω about their central axes. The ratio of their KEs (ring : disc) is (a) 1 : 2 (b) 2 : 1 (c) 1 : 1 (d) 4 : 1
21. A wheel starts from rest with α = 4 rad/s². The angle it turns through in the 3rd second is (a) 10 rad (b) 18 rad (c) 8 rad (d) 12 rad
22. A constant torque of 10 N m turns a wheel through 5 revolutions. The work done is about (a) 50 J (b) 157 J (c) 628 J (d) 314 J
Level 3: Challenge
23. Blocks of 3 kg and 1 kg hang over a pulley that is a uniform disc of mass 4 kg. The rope does not slip. The acceleration of the blocks is about (a) 5 m/s² (b) 3.33 m/s² (c) 4 m/s² (d) 2.5 m/s²
24. A string wound on a uniform disc of mass 4 kg and radius 0.5 m, free to turn on a fixed axle, is pulled with a steady 20 N. The disc's angular acceleration is (a) 5 rad/s² (b) 10 rad/s² (c) 20 rad/s² (d) 40 rad/s²
25. A uniform rod hinged at one end is released from horizontal. Just after release, the linear acceleration of its free end is (a) g (b) 3g/2 (c) g/2 (d) 2g
26. A flywheel with MI 5 kg m² turning at 600 rpm is stopped uniformly in 10 s. The braking torque is about (a) 15.7 N m (b) 62.8 N m (c) 314 N m (d) 31.4 N m
27. A disc and a ring of the same mass and radius start from rest under the same torque about their central axes. After the same time, ω_disc/ω_ring is (a) 1/2 (b) 1 (c) 2 (d) 4
28. A 2 kg block hangs from a rope wound on a pulley that is a thin ring of mass 2 kg. Starting from rest, the block falls 2 m. Its speed then is about (a) 6.32 m/s (b) 4.47 m/s (c) 3.16 m/s (d) 5.0 m/s
29. Assertion (A): A heavy flywheel helps keep an engine's speed steady. Reason (R): A larger MI means a given torque produces a smaller angular acceleration. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: In rotation about a fixed axis, every particle of a rigid body has the same linear speed. Statement II: In rotation about a fixed axis, every particle of a rigid body has the same angular acceleration. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | c | τ = Iα mirrors F = ma |
| 2 | b | Sum of ½m(rω)² |
| 3 | a | P = dW/dt = τ dθ/dt |
| 4 | c | dω/dt |
| 5 | d | α = τ/I = 0 |
| 6 | b | ω = 3 × 4 |
| 7 | d | Direct analogue |
| 8 | d | 6/2 = 3 rad/s² |
| 9 | a | W = ∫τ dθ |
| 10 | c | K ∝ ω² |
| 11 | b | θ = (ω₀/2)t = 20π × 20 = 400π rad |
| 12 | c | ½ × 2 × 100 |
| 13 | a | 20 × 10π = 628 W |
| 14 | d | 10/(1 + 2/2) = 5 m/s² |
| 15 | a | 1 × (10 − 5) = 5 N |
| 16 | b | α = 5 rad/s², τ = 0.8 × 5 |
| 17 | c | ½ × 0.5 × (400 − 100) |
| 18 | a | 3g/2L = 30/3 = 10 rad/s² |
| 19 | c | √(3g/L) = √20 |
| 20 | b | I ratio 2 : 1 at the same ω |
| 21 | a | α(n − ½) = 4 × 2.5 |
| 22 | d | 10 × 10π ≈ 314 J |
| 23 | b | 20/(3 + 1 + 2) = 3.33 m/s² |
| 24 | c | FR/(MR²/2) = 10/0.5 |
| 25 | b | αL = (3g/2L)L |
| 26 | d | α = 20π/10 = 2π, τ = 5 × 2π |
| 27 | c | Same τ, disc has half the I |
| 28 | b | mgh = ½(m + M)v²: 40 = 2v² |
| 29 | a | Large I resists changes in ω |
| 30 | d | v = rω differs with r; α is common |
Chapter 5 revision sheet
One-page summary
Constant α equations: ω = ω₀ + αt; θ = ω₀t + ½αt²; ω² = ω₀² + 2αθ. Angles in radians.
Convert speeds: ω (rad/s) = rpm × 2π/60. Revolutions = θ/(2π).
Link to a point at radius r: v = rω, a_t = rα, a_c = rω² = v²/r.
Newton's second law for rotation about a fixed axis: τ_ext = Iα.
Rotational KE: K = ½Iω². Work by a torque: W = ∫τ dθ = τθ for constant torque.
Power: P = τω. Work-energy theorem: W_net = Δ(½Iω²).
Block on a rope wound on a pulley (M, R): a = mg/(m + I/R²). For a disc pulley, I/R² = M/2.
Atwood machine with a pulley: a = (m₂ − m₁)g/(m₁ + m₂ + I/R²). Tensions on the two sides differ; the difference turns the pulley.
Rod (M, L) hinged at one end, released from horizontal: α = 3g/(2L), free-end acceleration 3g/2 at the start.
Same rod at the vertical: ω = √(3g/L), free-end speed √(3gL).
Analogues: F ↔ τ, m ↔ I, v ↔ ω, a ↔ α, p ↔ L, ½mv² ↔ ½Iω², Fv ↔ τω.
Uniform slowing from ω₀ to rest in time t: θ = ω₀t/2 (area under the ω–t graph).
Must-remember table
| Translation | Rotation | Unit (rotation) |
|---|---|---|
| v = u + at | ω = ω₀ + αt | rad/s |
| s = ut + ½at² | θ = ω₀t + ½αt² | rad |
| F = ma | τ = Iα | N m |
| K = ½mv² | K = ½Iω² | J |
| W = Fs | W = τθ | J |
| P = Fv | P = τω | W |
| Pulley block | a = mg/(m + I/R²) | m/s² |
| Hinged rod | α₀ = 3g/(2L), ω_bottom = √(3g/L) | rad/s², rad/s |
Memory aids
"Swap and spin": change s → θ, v → ω, a → α, m → I, F → τ, and every linear equation becomes its rotational twin.
"Rpm needs 2π over 60": multiply rpm by 2π/60 (about 0.105) to get rad/s.
"Pulley adds I by R²": a heavy pulley acts like an extra mass I/R² in the denominator.
"Three-halves at the start": a hinged rod released horizontal begins with free-end acceleration 3g/2, more than g.
"PTO = Power, Torque, Omega": P = τω.
Concept connections
The constant-acceleration equations here are the same forms as in Physics Book 2: Kinematics.
Work, KE and power in rotation extend Physics Book 4: Work, Energy and Power.
Rotational KE of molecules adds degrees of freedom to heat capacity in Physics Book 9: Kinetic Theory of Gases.
Practice MCQs: Chapter 5, Level 4 (new NEET pattern)
31. Match each rotational quantity with its expression.
List I: A. Rotational kinetic energy; B. Rotational power; C. Work done by a torque; D. Angular impulse
List II: (i) τω; (ii) change in angular momentum; (iii) ½Iω²; (iv) ∫τ dθ
(a) A-iii, B-i, C-iv, D-ii (b) A-i, B-iii, C-iv, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-iii, B-i, C-ii, D-iv
32. Match each rotational quantity with its linear analogue.
List I: A. Torque; B. Moment of inertia; C. Angular velocity; D. ½Iω²
List II: (i) velocity; (ii) force; (iii) ½mv²; (iv) mass
(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-iv, C-i, D-iii (d) A-ii, B-i, C-iv, D-iii
33. A wheel with I = 0.5 kg m² starts from rest with constant α = 2 rad/s². Match each quantity at t = 5 s with its value.
List I: A. Angular velocity; B. Angle turned; C. Kinetic energy; D. Torque acting
List II: (i) 1 N m; (ii) 25 J; (iii) 10 rad/s; (iv) 25 rad
(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-ii, C-iv, D-i (d) A-i, B-iv, C-ii, D-iii
34. A 1 kg block hangs from a light rope wound on a pulley that turns freely. Take g = 10 m/s². Match each pulley with the block's acceleration.
List I: A. Massless pulley; B. Disc pulley of mass 2 kg; C. Ring pulley of mass 4 kg; D. Disc pulley of mass 4 kg
List II: (i) 2 m/s²; (ii) 10 m/s²; (iii) 3.33 m/s²; (iv) 5 m/s²
(a) A-ii, B-iv, C-iii, D-i (b) A-ii, B-i, C-iv, D-iii (c) A-iv, B-ii, C-i, D-iii (d) A-ii, B-iv, C-i, D-iii
35. How many of the following statements are correct?
A. A constant torque on a body of fixed MI gives a constant angular acceleration.
B. Rotational KE = ½Iω².
C. Power delivered by a torque is τ/ω.
D. Work done by a constant torque through angle θ is τθ.
E. The radian is the SI unit of angular acceleration.
(a) 2 (b) 4 (c) 5 (d) 3
36. A uniform rod of mass M and length L is hinged at one end and released from rest in a horizontal position. Choose the correct set of statements.
A. Its initial angular acceleration is 3g/(2L).
B. The initial linear acceleration of its free end is 3g/2.
C. Its angular speed when vertical is √(3g/L).
D. The speed of its free end when vertical is √(3gL).
(a) A and B only (b) A, B, C and D (c) A, C and D only (d) B and C only
37. How many of the following statements are correct?
A. Doubling ω makes the rotational KE four times.
B. Doubling I at the same ω doubles the rotational KE.
C. For the same angular momentum, rotational KE varies as 1/I.
D. A flywheel stores energy as rotational KE.
E. Rotational KE can be negative when the body turns clockwise.
(a) 3 (b) 5 (c) 4 (d) 2
38. A ceiling fan is switched off at 300 rpm. It slows down uniformly and stops in 20 s. Choose the correct set of statements.
A. Its angular deceleration is about 1.57 rad/s².
B. It makes 50 revolutions before stopping.
C. It makes 100 revolutions before stopping.
D. Its average angular velocity while stopping is 5π rad/s.
(a) A, B and D only (b) A and C only (c) B and D only (d) A, C and D only
39. A graph of ω (y-axis) against t (x-axis) for a wheel rises in a straight line from 0 to 20 rad/s in the first 4 s, then stays flat. The wheel's MI is 2 kg m². The net torque during the first 4 s and the angle turned in that time are
(a) 5 N m, 40 rad (b) 10 N m, 80 rad (c) 10 N m, 40 rad (d) 40 N m, 40 rad
40. A graph of ω against t for a grinding wheel falls in a straight line from 40 rad/s at t = 0 to 0 at t = 8 s, only because of friction. Its MI is 0.5 kg m². The frictional torque and total angle turned are
(a) 5 N m, 320 rad (b) 2.5 N m, 320 rad (c) 2.5 N m, 160 rad (d) 20 N m, 160 rad
41. The table lists four motors.
| Motor | Torque (N m) | ω (rad/s) |
|---|---|---|
| P | 10 | 100 |
| Q | 25 | 30 |
| R | 5 | 220 |
| S | 40 | 20 |
The order of output power, highest first, is
(a) S > Q > P > R (b) P > R > S > Q (c) R > S > P > Q (d) R > P > S > Q
Passage for Q42–43: A well has a 4 kg disc-shaped pulley of radius 0.2 m on a frictionless axle. A light rope wound on it holds a 2 kg bucket. The bucket is released from rest. Take g = 10 m/s².
42. The acceleration of the bucket and the tension in the rope are
(a) 6.67 m/s², 6.7 N (b) 5 m/s², 10 N (c) 10 m/s², 0 N (d) 5 m/s², 20 N
43. The angular speed of the pulley after the bucket falls 0.9 m is
(a) 3 rad/s (b) 30 rad/s (c) 15 rad/s (d) 7.5 rad/s
44. Masses of 3 kg and 5 kg hang on either side of a pulley that is a uniform 4 kg disc. The string does not slip. Take g = 10 m/s². The acceleration of the masses and the difference between the two tensions are
(a) 2.5 m/s², 0 N (b) 2 m/s², 8 N (c) 2.5 m/s², 4 N (d) 2 m/s², 4 N
45. A 2 kg uniform disc of radius 0.5 m spins at 20 rad/s. A brake pad presses on its rim with a constant tangential force and stops it in 4 s. The brake force and the energy turned into heat are
(a) 2.5 N, 50 J (b) 1.25 N, 50 J (c) 2.5 N, 100 J (d) 5 N, 25 J
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | a | K = ½Iω², P = τω, W = ∫τ dθ, angular impulse = ΔL |
| 32 | c | τ ↔ F, I ↔ m, ω ↔ v, ½Iω² ↔ ½mv² |
| 33 | b | ω = 10 rad/s; θ = ½ × 2 × 25 = 25 rad; K = ½ × 0.5 × 100 = 25 J; τ = 0.5 × 2 = 1 N m |
| 34 | d | I/R² = 0, 1, 4, 2 kg: a = 10/1, 10/2, 10/5, 10/3 |
| 35 | d | A, B, D true; P = τω; α is in rad/s² |
| 36 | b | τ = MgL/2, I = ML²/3 gives α = 3g/(2L); energy MgL/2 = ½(ML²/3)ω² gives ω = √(3g/L); v = ωL |
| 37 | c | A, B, C, D true; K is always positive |
| 38 | a | ω₀ = 10π rad/s; α = π/2 ≈ 1.57; θ = 10π × 20/2 = 100π rad = 50 rev; average ω = 5π |
| 39 | c | α = 5 rad/s², τ = 10 N m; area = ½ × 4 × 20 = 40 rad |
| 40 | c | α = 5 rad/s², τ = 0.5 × 5 = 2.5 N m; area = ½ × 8 × 40 = 160 rad |
| 41 | d | P = τω: 1000, 750, 1100, 800 W |
| 42 | b | I/R² = M/2 = 2 kg; a = 20/(2 + 2) = 5 m/s²; T = 2(10 − 5) = 10 N |
| 43 | c | v² = 2 × 5 × 0.9 = 9, v = 3 m/s; ω = 3/0.2 = 15 rad/s |
| 44 | d | a = 20/(3 + 5 + 2) = 2 m/s²; T₁ = 36 N, T₂ = 40 N |
| 45 | a | I = 0.25, α = 5, τ = 1.25 N m, F = τ/R = 2.5 N; heat = ½ × 0.25 × 400 = 50 J |