Chapter 5 of 11 · 25 min read

Chapter 3: Moment of Inertia and Radius of Gyration

Mass tells you how hard it is to change a body's straight-line motion. Moment of inertia tells you how hard it is to change its rotation. Unlike mass, it depends on the axis and on how the mass is spread around it.

What you will learn

  • The meaning of moment of inertia (MI) and how to compute it for a set of particles.

  • Radius of gyration and how to find it.

  • Full derivations of MI for a ring, a rod and a disc.

  • The standard MI values NEET expects you to know for common bodies.

  • How mass distribution and axis choice change MI, and why flywheels have heavy rims.

3.1 What moment of inertia means

Spin an empty steel plate on a finger, then a plate of the same mass with all of it at the rim. The second one is harder to start and harder to stop. The mass is the same; its distance from the axis is not.

For a particle of mass m at perpendicular distance r from an axis, the MI is mr². For a system of particles:

I=∑miri2=m1r12+m2r22+…I = \sum m_i r_i^2 = m_1 r_1^2 + m_2 r_2^2 + \dots

For a continuous body:

I=∫r2 dmI = \int r^2\, dm

Here r is always the perpendicular distance from the axis, not from the origin.

MI is a scalar for rotation about a fixed axis. Its SI unit is kg m² and its dimensions are [ML²]. It depends on:

  • the total mass,

  • how the mass is distributed (mass far from the axis counts much more, because of r²),

  • the position and direction of the axis.

It does not depend on how fast the body spins or on the torque applied. MI plays the role in rotation that mass plays in translation.

3.2 Radius of gyration

The radius of gyration k is the distance from the axis at which the whole mass, packed into one point, would give the same MI:

I=Mk2,k=IMI = Mk^2, \qquad k = \sqrt{\frac{I}{M}}

For n equal particles, k is the root mean square of their distances from the axis. So k is a single number that tells you how far, on average, the mass sits from the axis. It has dimensions [L] and depends on the axis, just as I does.

3.3 Derivations for standard bodies

Thin ring about its central axis (perpendicular to its plane). Every element of the ring sits at the same distance R from the axis. So

I=∫R2 dm=R2∫dm=MR2I = \int R^2\, dm = R^2 \int dm = MR^2

The same result holds for a thin-walled hollow cylinder about its own axis, because it is just a stack of rings.

Thin uniform rod about a perpendicular axis through its centre. Let the rod have mass M and length L along the x-axis, centred at the origin. An element dx has mass dm = (M/L) dx.

Ic=∫−L/2L/2x2ML dx=ML[x33]−L/2L/2=ML⋅L312=ML212I_c = \int_{-L/2}^{L/2} x^2 \frac{M}{L}\, dx = \frac{M}{L}\left[\frac{x^3}{3}\right]_{-L/2}^{L/2} = \frac{M}{L}\cdot\frac{L^3}{12} = \frac{ML^2}{12}

Same rod about a perpendicular axis through one end. Integrate from 0 to L instead:

Iend=∫0Lx2ML dx=ML23I_{end} = \int_0^L x^2 \frac{M}{L}\, dx = \frac{ML^2}{3}

The end value is four times the centre value. Moving the axis to the end puts more mass far away.

Uniform disc about its central axis (perpendicular to its plane). Split the disc of mass M and radius R into thin rings of radius r and width dr. Area of a ring = 2πr dr, so its mass is

dm=MπR2 2πr dr=2MR2 r drdm = \frac{M}{\pi R^2}\, 2\pi r\, dr = \frac{2M}{R^2}\, r\, dr

Each ring contributes r² dm:

I=∫0Rr2⋅2MR2r dr=2MR2⋅R44=MR22I = \int_0^R r^2 \cdot \frac{2M}{R^2} r\, dr = \frac{2M}{R^2}\cdot\frac{R^4}{4} = \frac{MR^2}{2}

A solid cylinder about its own axis is a stack of such discs, so it too has MR²/2.

Annular disc (washer) with inner radius R₁ and outer radius R₂. The same ring method, integrated from R₁ to R₂, gives

I=M2(R12+R22)I = \frac{M}{2}\left(R_1^2 + R_2^2\right)

Put R₁ = 0 to get the disc, or R₁ = R₂ to get the ring. Good formulas pass such checks.

Figure 3.1 · Standard axes and MI values for a rod, a disc and a ring
Figure 3.1 · Standard axes and MI values for a rod, a disc and a ring

For each body, the axis that keeps the mass farther away gives the larger MI: the rod's end axis beats its centre axis, and the ring beats the disc.

3.4 Table of standard moments of inertia

Learn this table thoroughly. Many NEET questions are one step away from it. Results marked with an asterisk use the theorems of Chapter 4.

Body (mass M)AxisMIRadius of gyration k
Thin ring, radius RThrough centre, perpendicular to planeMR²R
Thin ring, radius RAny diameter*MR²/2R/√2
Uniform disc, radius RThrough centre, perpendicular to planeMR²/2R/√2
Uniform disc, radius RAny diameter*MR²/4R/2
Thin rod, length LPerpendicular, through centreML²/12L/(2√3)
Thin rod, length LPerpendicular, through one endML²/3L/√3
Thin hollow cylinder, radius RIts own axisMR²R
Solid cylinder, radius RIts own axisMR²/2R/√2
Solid cylinder, radius R, length LPerpendicular to axis, through centreM(R²/4 + L²/12)√(R²/4 + L²/12)
Solid sphere, radius RAny diameter2MR²/5R√(2/5)
Thin hollow sphere, radius RAny diameter2MR²/3R√(2/3)
Rectangular plate, sides a and bThrough centre, perpendicular to plate*M(a² + b²)/12√((a² + b²)/12)
Annular disc, radii R₁ and R₂Through centre, perpendicular to planeM(R₁² + R₂²)/2√((R₁² + R₂²)/2)

For the same mass and radius about a central axis, the order is: ring = hollow cylinder (MR²) > hollow sphere (0.67MR²) > disc = solid cylinder (0.5MR²) > solid sphere (0.4MR²). The more mass near the rim, the larger the MI.

3.5 Why MI matters in practice

A flywheel in an engine or a hand-operated sugarcane juice machine has a heavy rim and thin spokes. That gives a large MI for little total mass. A large MI resists changes in speed, so the machine runs smoothly between pushes.

A tightrope walker carries a long pole. The pole raises her MI about the rope, so any tipping torque produces only a small angular acceleration. She gets time to correct her balance.

The same idea explains why a ceiling fan takes a while to stop after you switch it off. Its blades put mass far from the axis.

Worked example 3.1: Masses of 1 kg, 2 kg and 3 kg sit at 1 m, 2 m and 3 m from an axis. Find the MI and the radius of gyration.

Solution: I = 1 × 1² + 2 × 2² + 3 × 3² = 1 + 8 + 27 = 36 kg m². M = 6 kg, so k = √(36/6) = √6 ≈ 2.45 m.

Worked example 3.2: A uniform rod of mass 0.5 kg and length 1.2 m rotates about a perpendicular axis. Find its MI about the centre and about one end.

Solution: I_c = ML²/12 = 0.5 × 1.44/12 = 0.06 kg m². I_end = ML²/3 = 0.5 × 1.44/3 = 0.24 kg m². The end value is four times the centre value.

Worked example 3.3: A disc and a ring each have mass 2 kg and radius 0.2 m. Compare their MIs about the central perpendicular axis.

Solution: Disc: (1/2) × 2 × 0.04 = 0.04 kg m². Ring: 2 × 0.04 = 0.08 kg m². The ring has twice the MI because all its mass is at the rim.

Worked example 3.4: Find the radius of gyration of a uniform disc of radius 10 cm about its central perpendicular axis.

Solution: MR²/2 = Mk² gives k = R/√2 = 10/1.414 ≈ 7.07 cm.

Worked example 3.5: Four particles, each of mass m, sit at the corners of a square of side a. Find the MI about (i) an axis through the centre perpendicular to the square, (ii) an axis along one side, (iii) an axis along a diagonal.

Solution: (i) Each particle is half a diagonal, a/√2, from the centre. I = 4m(a²/2) = 2ma². (ii) Two particles lie on the axis and contribute nothing. The other two are a away. I = 2ma². (iii) Two particles lie on the diagonal. The other two are a/√2 from it. I = 2m(a²/2) = ma².

Worked example 3.6: A solid sphere and a thin hollow sphere have the same mass and radius. Find the ratio of their MIs about a diameter, and of their radii of gyration.

Solution: I_solid : I_hollow = (2/5) : (2/3) = 3 : 5. Since k = √(I/M), k_solid : k_hollow = √3 : √5.

Worked example 3.7: A rod of length L has linear density λ = kx, where x is measured from end A. Find its MI about a perpendicular axis through A, in terms of its mass M.

Solution: M = ∫₀ᴸ kx dx = kL²/2. I = ∫₀ᴸ x² · kx dx = kL⁴/4. Replace k = 2M/L²: I = (2M/L²)(L⁴/4) = ML²/2. This is larger than ML²/3 because the heavier part sits far from A.

Worked example 3.8: A disc and a ring have the same mass and the same MI about their central perpendicular axes. Find the ratio of their radii.

Solution: M R_d²/2 = M R_r². So R_d² = 2R_r² and R_d/R_r = √2. The disc must be larger to match the ring.

Quick revision

  • I = Σmr² = ∫r² dm, with r measured perpendicular to the axis. Unit kg m², dimensions [ML²].

  • I = Mk²; k is the rms distance of the mass from the axis.

  • Ring MR², disc MR²/2, rod (centre) ML²/12, rod (end) ML²/3.

  • Solid sphere 2MR²/5, hollow sphere 2MR²/3, solid cylinder MR²/2, hollow cylinder MR².

  • Annular disc M(R₁² + R₂²)/2.

  • Same M and R: ring > hollow sphere > disc > solid sphere.

  • MI depends on mass, its distribution and the axis; not on ω or torque.

NEET traps

  • Measuring r from the origin instead of perpendicular to the axis.

  • Swapping 2/5 (solid sphere) and 2/3 (hollow sphere).

  • Using ML²/12 when the axis passes through the end of the rod.

  • Writing k for a disc as R/2. About its central perpendicular axis it is R/√2; R/2 is about a diameter.

  • Thinking MI is fixed for a body. It changes with every axis.

  • Removing a central disc and subtracting MR²/2 with the full M. Use the removed part's own mass and radius.

Practice MCQs: Chapter 3

Level 1: Concept check

1. The SI unit of moment of inertia is (a) kg m (b) kg m² (c) kg/m² (d) N m

2. The MI of a body does NOT depend on (a) its mass (b) the distribution of its mass (c) the axis of rotation (d) its angular velocity

3. The MI of a thin ring of mass M and radius R about its central perpendicular axis is (a) MR²/2 (b) 2MR²/5 (c) 2MR² (d) MR²

4. The MI of a thin rod of mass M and length L about a perpendicular axis through its centre is (a) ML²/12 (b) ML²/3 (c) ML²/2 (d) ML²/6

5. The dimensions of radius of gyration are (a) [ML²] (b) [ML] (c) [L] (d) [L²]

6. The radius of gyration of a uniform disc of radius R about its central perpendicular axis is (a) R/√2 (b) R/2 (c) R (d) √2R

7. Four bodies have the same mass and radius. Which has the largest MI about a central axis? (a) Disc (b) Solid sphere (c) Hollow sphere (d) Ring

8. The MI of a solid sphere about a diameter is (a) 2MR²/3 (b) 2MR²/5 (c) 7MR²/5 (d) MR²/2

9. A flywheel has most of its mass in its rim in order to (a) reduce the total mass (b) reduce friction at the axle (c) increase its MI for a given mass (d) raise its angular speed

10. In rotational motion, moment of inertia plays the role that, in linear motion, is played by (a) force (b) mass (c) momentum (d) velocity

Level 2: NEET standard

11. Particles of 2 kg and 3 kg are 0.5 m and 1 m from an axis. Their MI about the axis is (a) 2.5 kg m² (b) 3.5 kg m² (c) 4 kg m² (d) 5 kg m²

12. A uniform rod of mass 0.3 kg and length 60 cm rotates about a perpendicular axis through one end. Its MI is (a) 0.009 kg m² (b) 0.018 kg m² (c) 0.036 kg m² (d) 0.108 kg m²

13. A uniform disc of mass 4 kg and radius 0.5 m rotates about its central perpendicular axis. Its MI is (a) 0.5 kg m² (b) 1 kg m² (c) 0.25 kg m² (d) 2 kg m²

14. The radius of gyration of a thin rod of length L about a perpendicular axis through one end is (a) L/2 (b) L/√12 (c) L/3 (d) L/√3

15. Four 0.5 kg particles sit at the corners of a square of side 2 m. Their MI about an axis through the centre, perpendicular to the square, is (a) 2 kg m² (b) 4 kg m² (c) 8 kg m² (d) 1 kg m²

16. For the square of Q15, the MI about an axis along one diagonal is (a) 4 kg m² (b) 1 kg m² (c) 2 kg m² (d) 8 kg m²

17. A ring and a disc have the same mass and radius. The ratio of their MIs about their central perpendicular axes (ring : disc) is (a) 2 : 1 (b) 1 : 2 (c) 1 : 1 (d) 4 : 1

18. A solid sphere of mass 5 kg and radius 0.2 m spins about a diameter. Its MI is (a) 0.04 kg m² (b) 0.13 kg m² (c) 0.2 kg m² (d) 0.08 kg m²

19. The radius of gyration of a thin hollow sphere of radius 30 cm about a diameter is about (a) 19.0 cm (b) 21.2 cm (c) 24.5 cm (d) 30 cm

20. A disc and a ring have the same mass and the same MI about their central perpendicular axes. The ratio R_disc/R_ring is (a) 2 (b) √2 (c) 1/√2 (d) 1

21. A thin wire of mass M and length L is bent into a circular ring. Its MI about the ring's central perpendicular axis is (a) ML²/4π² (b) ML²/2π² (c) ML²/π² (d) ML²/12

22. From a uniform disc of mass M and radius R, a concentric disc of radius R/2 is removed. The MI of the remaining annulus about the central perpendicular axis is (a) 3MR²/8 (b) 7MR²/16 (c) 15MR²/32 (d) MR²/4

Level 3: Challenge

23. A rod of mass M and length L has linear density λ = kx, with x measured from end A. Its MI about a perpendicular axis through A is (a) ML²/3 (b) ML²/2 (c) 2ML²/3 (d) ML²/4

24. Particles of 1 kg and 4 kg are joined by a light rod 1 m long. The MI of the pair about a perpendicular axis through their COM is (a) 0.8 kg m² (b) 1 kg m² (c) 1.6 kg m² (d) 4 kg m²

25. A cycle wheel has a rim (thin ring) of mass 3 kg and radius 0.4 m, and six uniform spokes of 0.2 kg each running from the centre to the rim. Its MI about the axle is (a) 0.48 kg m² (b) 0.512 kg m² (c) 0.544 kg m² (d) 0.64 kg m²

26. A uniform washer of mass 2 kg has inner radius 0.1 m and outer radius 0.3 m. Its MI about the central perpendicular axis is (a) 0.08 kg m² (b) 0.09 kg m² (c) 0.2 kg m² (d) 0.1 kg m²

27. The ratio of the radius of gyration of a solid sphere to that of a thin hollow sphere of the same radius, both about a diameter, is (a) √(3/5) (b) √(5/3) (c) 3/5 (d) 2/5

28. Identical point masses m sit on a line at distances 1 m, 1/2 m, 1/4 m, 1/8 m, … (endlessly) from a perpendicular axis. Their total MI about the axis is (a) 2m (b) 4m/3 (c) 3m/2 (d) m

29. Assertion (A): A ring and a disc of the same mass and radius have equal MIs about their central perpendicular axes. Reason (R): In a thin ring, all the mass lies at the same distance R from the central axis. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: The radius of gyration of a body depends on the axis about which it is taken. Statement II: The radius of gyration of a solid sphere of radius R about a diameter is 2R/5. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bI = mr²
2dMI depends only on mass, its distribution and the axis
3dAll mass at distance R
4aStandard result by integration
5ck is a length
6aMR²/2 = Mk²
7dRing has all its mass at the rim
8bStandard result
9cMass far from the axis raises MI
10bBoth measure resistance to change in motion
11b2 × 0.25 + 3 × 1 = 3.5
12c0.3 × 0.36/3 = 0.036
13a(1/2) × 4 × 0.25 = 0.5
14dML²/3 = Mk²
15bEach at √2 m: 4 × 0.5 × 2 = 4
16cTwo masses on the axis; two at √2 m: 2 × 0.5 × 2 = 2
17aMR² : MR²/2
18d(2/5) × 5 × 0.04 = 0.08
19c30 × √(2/3) ≈ 24.5 cm
20bR_d²/2 = R_r²
21aR = L/2π, so MR² = ML²/4π²
22cMR²/2 − (M/4)(R/2)²/2 = 15MR²/32
23bI = kL⁴/4 with k = 2M/L²
24aReduced mass (4/5) kg × (1 m)²
25c3 × 0.16 + 6 × 0.2 × 0.16/3 = 0.544
26d(2/2)(0.01 + 0.09) = 0.1
27a√(2/5) / √(2/3) = √(3/5)
28bm(1 + 1/4 + 1/16 + …) = 4m/3
29dRing MR², disc MR²/2, so A is false
30ck = R√(2/5), not 2R/5

Chapter 3 revision sheet

One-page summary

  • Moment of inertia (MI) measures how hard it is to change a body's rotation about a given axis.

  • For particles, I = Σ m r², where r is the perpendicular distance of each particle from the axis.

  • For a continuous body, I = ∫ r² dm. Write dm with the density (λ dx, σ dA or ρ dV) before integrating.

  • MI depends on the mass, how the mass is spread about the axis, and which axis is chosen. It does not depend on the angular speed.

  • SI unit kg m², dimensions [ML²]. MI is a scalar for a fixed axis.

  • Radius of gyration k: I = Mk², so k = √(I/M). For a given shape, k does not depend on total mass.

  • Mass farther from the axis adds more MI. So a ring has more MI than a disc of the same mass and radius.

  • A rod's MI about its end (ML²/3) is four times that about its centre (ML²/12).

  • A solid cylinder about its axis behaves like a disc (MR²/2); a thin hollow cylinder behaves like a ring (MR²).

  • The rule "same mass, same radius": hollow sphere 2/3, solid sphere 2/5, ring 1, disc 1/2 (each × MR²).

  • Flywheels put mass at the rim to raise MI; a tightrope walker's pole raises MI to slow down tipping.

  • MI plays the role in rotation that mass plays in translation.

Must-remember table

BodyAxisMIk
Thin ringcentral, perpendicular to planeMR²R
Disc / solid cylindercentral axisMR²/2R/√2
Thin rodcentre, perpendicular to rodML²/12L/(2√3)
Thin rodend, perpendicular to rodML²/3L/√3
Solid spherediameter2MR²/5√(2/5) R
Hollow spherediameter2MR²/3√(2/3) R
Hollow cylinder (thin)central axisMR²R
Rectangular plate a × bcentre, perpendicular to plateM(a² + b²)/12√((a² + b²)/12)
Annular disc R₁, R₂central, perpendicularM(R₁² + R₂²)/2√((R₁² + R₂²)/2)

Memory aids

  • "Ring 1, Disc ½, Shell ⅔, Ball ⅖": the fractions of MR² in falling order. Shell = hollow sphere, Ball = solid sphere.

  • "Rod 12 in the middle, 3 at the end": ML²/12 about the centre, ML²/3 about the end.

  • "Hollow holds more": for the same M and R, the hollow version always has the larger MI.

  • "K is for Keep-mass-out": k = √(I/M) has the mass divided out, so it depends only on shape and axis.

  • "Far mass, hard spin": MI grows with r², so doubling distance makes four times the MI.

Concept connections

  • The integration with λ, σ and ρ is the same method used for centre of mass in Chapter 1 and for field calculations in Physics Book 11: Electrostatics.

  • MI decides the time period of a physical pendulum and of torsional oscillations in Physics Book 10: Oscillations and Waves.

  • The analogy mass ↔ MI connects Newton's laws in Physics Book 3: Laws of Motion with τ = Iα in Chapter 5.

Practice MCQs: Chapter 3, Level 4 (new NEET pattern)

31. Match each body (mass M, radius R) with the fraction of MR² that gives its MI about the stated axis.

  • List I: A. Ring, central axis perpendicular to its plane; B. Solid sphere, diameter; C. Hollow sphere, diameter; D. Disc, central axis perpendicular to its plane

  • List II: (i) 2/3; (ii) 1/2; (iii) 1; (iv) 2/5

(a) A-iii, B-i, C-iv, D-ii (b) A-ii, B-iv, C-i, D-iii (c) A-iii, B-iv, C-i, D-ii (d) A-iii, B-iv, C-ii, D-i

32. Match each body and axis with its radius of gyration.

  • List I: A. Rod of length L, centre, perpendicular; B. Rod of length L, end, perpendicular; C. Disc of radius R, central perpendicular axis; D. Solid sphere of radius R, diameter

  • List II: (i) R/√2; (ii) L/(2√3); (iii) √(2/5) R; (iv) L/√3

(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-iv, C-iii, D-i (d) A-ii, B-i, C-iv, D-iii

33. Each body has mass 2 kg and radius 0.5 m. Match it with its MI about the stated axis.

  • List I: A. Ring, central perpendicular axis; B. Disc, central perpendicular axis; C. Solid sphere, diameter; D. Hollow sphere, diameter

  • List II: (i) 0.333 kg m²; (ii) 0.2 kg m²; (iii) 0.25 kg m²; (iv) 0.5 kg m²

(a) A-iv, B-ii, C-iii, D-i (b) A-iii, B-iv, C-ii, D-i (c) A-iv, B-iii, C-i, D-ii (d) A-iv, B-iii, C-ii, D-i

34. Match each quantity with its dimensional formula.

  • List I: A. Moment of inertia; B. Radius of gyration; C. Torque; D. Angular momentum

  • List II: (i) [ML²T⁻¹]; (ii) [L]; (iii) [ML²]; (iv) [ML²T⁻²]

(a) A-iii, B-ii, C-i, D-iv (b) A-iii, B-ii, C-iv, D-i (c) A-ii, B-iii, C-iv, D-i (d) A-iv, B-ii, C-iii, D-i

35. How many of the following statements are correct?

  • A. The MI of a body depends on the axis chosen.

  • B. The MI of a body is fixed, whatever the distribution of its mass.

  • C. For the same mass and radius, a ring has a larger MI than a disc about their central perpendicular axes.

  • D. Doubling the mass of a uniform disc, keeping its radius fixed, doubles its radius of gyration.

  • E. The SI unit of MI is kg m².

(a) 2 (b) 3 (c) 4 (d) 5

36. A solid sphere and a hollow sphere have the same mass and radius. Choose the correct set of statements about their MI about a diameter.

  • A. The hollow sphere has the larger MI.

  • B. I_solid / I_hollow = 3/5.

  • C. The solid sphere has the larger radius of gyration.

  • D. Both have the same MI because mass and radius are equal.

(a) A and C only (b) B and D only (c) A, B and C only (d) A and B only

37. How many of the following statements are correct?

  • A. A flywheel keeps most of its mass near the rim to increase its MI.

  • B. A tightrope walker's long pole increases his MI about the rope.

  • C. MI plays the same role in rotation that mass plays in translation.

  • D. A body has only one value of MI.

  • E. The MI of a thin ring about its central perpendicular axis is MR².

(a) 3 (b) 2 (c) 5 (d) 4

38. A thin uniform rod has mass M and length L. Choose the correct set of statements.

  • A. Its MI about a perpendicular axis through its centre is ML²/12.

  • B. Its MI about a perpendicular axis through one end is ML²/3.

  • C. Its MI about its own length is nearly zero.

  • D. Its MI about the end is three times its MI about the centre.

(a) A, B and C only (b) A and B only (c) A, B and D only (d) B, C and D only

39. Four bodies each have mass 1 kg and radius 0.2 m. Their MI about a central symmetry axis is measured.

BodyMI (kg m²)
P0.040
Q0.020
R0.016
S0.0267

The bodies (ring about perpendicular axis, disc about perpendicular axis, solid sphere, hollow sphere) are correctly identified as

(a) P ring, Q hollow sphere, R solid sphere, S disc (b) P ring, Q disc, R solid sphere, S hollow sphere (c) P hollow sphere, Q disc, R solid sphere, S ring (d) P ring, Q solid sphere, R disc, S hollow sphere

40. A graph of MI (y-axis) against mass M (x-axis) for uniform discs of the same radius, about their central perpendicular axis, is a straight line through the origin. It passes through (5 kg, 0.4 kg m²). The radius of each disc is

(a) 0.16 m (b) 0.28 m (c) 0.08 m (d) 0.4 m

41. For rings of fixed mass, a graph of MI about the central perpendicular axis (y-axis) against R² (x-axis) is a straight line through the origin. It passes through (0.25 m², 0.75 kg m²). A solid sphere of the same mass and radius 0.5 m has MI about a diameter of

(a) 0.3 kg m² (b) 0.75 kg m² (c) 0.5 kg m² (d) 0.15 kg m²

Passage for Q42–43: Four small balls, each of mass 0.5 kg, sit at the corners of a square of side 0.4 m. They are joined by a light frame.

42. The MI about an axis through the centre of the square, perpendicular to its plane, is

(a) 0.32 kg m² (b) 0.08 kg m² (c) 0.16 kg m² (d) 0.04 kg m²

43. The MI about one diagonal of the square is

(a) 0.16 kg m² (b) 0.04 kg m² (c) 0.32 kg m² (d) 0.08 kg m²

44. A thin wire of mass M and length L is bent into a circular ring. The ratio of its MI about the ring's central perpendicular axis to the MI of the straight wire about a perpendicular axis through its centre is

(a) 3/π² (b) π²/3 (c) 12/π (d) 1/(4π²)

45. A rod of length L lies along the x-axis from x = 0 to x = L. Its linear mass density is λ = kx². If its total mass is M, its MI about a perpendicular axis through x = 0 is

(a) ML²/2 (b) ML²/3 (c) 2ML²/3 (d) 3ML²/5

Level 4 answer key

QAnsReason
31cRing 1, solid sphere 2/5, hollow sphere 2/3, disc 1/2
32ak = √(I/M) from ML²/12, ML²/3, MR²/2, 2MR²/5
33dMR² = 0.5; disc 0.25; solid sphere 0.2; hollow sphere 0.333 kg m²
34bI is ML², k is L, τ is ML²T⁻², L is ML²T⁻¹
35bA, C, E true; MI depends on distribution; k does not change with total mass
36d(2/5)/(2/3) = 3/5; the hollow sphere has more MI and the larger k
37dA, B, C, E true; MI changes with the axis
38aML²/3 is four times ML²/12, so D is false
39bMR² = 0.04: ring 0.04, disc 0.02, solid sphere 0.016, hollow sphere 0.0267
40dSlope R²/2 = 0.4/5 = 0.08, R² = 0.16, R = 0.4 m
41aSlope gives M = 3 kg; (2/5) × 3 × 0.25 = 0.3 kg m²
42cEach ball at r² = a²/2 = 0.08 m²; 4 × 0.5 × 0.08 = 0.16 kg m²
43dTwo balls on the diagonal give zero; other two at r² = 0.08: 2 × 0.5 × 0.08 = 0.08 kg m²
44aR = L/(2π), I_ring = ML²/(4π²); divide by ML²/12 to get 3/π²
45dM = kL³/3, I = ∫kx⁴ dx = kL⁵/5 = (3/5)ML²
25 min left
‹
›