Chapter 4: Parallel and Perpendicular Axes Theorems
You rarely need to integrate for a new axis. Two theorems let you move from a known MI to a new one in a single line. The parallel axis theorem works for any body. The perpendicular axis theorem works only for flat bodies.
What you will learn
The parallel axis theorem, its proof and its conditions.
The perpendicular axis theorem, its proof and why it needs a lamina.
How to get MI about tangents, diameters and generators of rings, discs, spheres and cylinders.
How to combine both theorems in one problem.
How to handle composite bodies and bodies with holes.
4.1 Parallel axis theorem
Let I_cm be the MI of a body of mass M about an axis through its COM. Take any axis parallel to it at a perpendicular distance d. Then
Proof. Measure each particle's perpendicular position from the COM axis as a 2D vector rᵢ'. Let d be the perpendicular vector from the new axis to the COM axis. The particle's distance from the new axis is |rᵢ' + d|. So
The first sum is I_cm. The middle sum vanishes, because Σmᵢrᵢ' = 0 when positions are measured from the COM. The last term is Md². That proves the result.

Each element dm sits at r′ from axis 1 and r from axis 2; summing r² dm over the body gives I_cm + Md², because the cross term vanishes about the COM.
Three points to remember:
One of the two axes must pass through the COM. You cannot jump between two arbitrary parallel axes directly. Go through the COM axis first.
The axes must be parallel.
Since Md² is never negative, I_cm is the least MI among all parallel axes.
To move between two non-COM axes at distances d₁ and d₂ from the COM axis, use I₂ = I₁ + M(d₂² − d₁²).
4.2 Perpendicular axis theorem
Take a flat body (a lamina) in the xy-plane. Let I_x and I_y be its MIs about two perpendicular axes in its plane, and I_z the MI about the axis perpendicular to the plane through the point where they meet. Then
Proof. A particle at (x, y, 0) is at distance √(x² + y²) from the z-axis, distance |y| from the x-axis and |x| from the y-axis. So
The step I_x = Σmᵢyᵢ² works only because z = 0 for every particle. For a thick body, I_x = Σmᵢ(yᵢ² + zᵢ²), and the theorem fails. So never use it for a sphere, a cube or a thick cylinder.
The theorem does not need the axes to pass through the COM. They only need to be mutually perpendicular and meet at one point, with two of them in the plane.
4.3 Standard results using the theorems
Ring about a diameter. By symmetry every diameter has the same MI, I_d. The perpendicular axis theorem gives I_d + I_d = MR², so I_d = MR²/2.
Disc about a diameter. Same steps: 2I_d = MR²/2, so I_d = MR²/4.
Square plate of side a about a diagonal. About the axis through the centre perpendicular to the plate, I_z = M(a² + a²)/12 = Ma²/6. The two diagonals are perpendicular and, by symmetry, have equal MI. So each diagonal has Ma²/12. In fact every in-plane axis through the centre of a square has Ma²/12.
Tangents. Add MR² to the matching diameter or central axis value, using the parallel axis theorem:
| Body (mass M, radius R) | Axis | MI |
|---|---|---|
| Ring | Tangent in its plane | MR²/2 + MR² = 3MR²/2 |
| Ring | Tangent perpendicular to its plane | MR² + MR² = 2MR² |
| Disc | Tangent in its plane | MR²/4 + MR² = 5MR²/4 |
| Disc | Tangent perpendicular to its plane | MR²/2 + MR² = 3MR²/2 |
| Solid sphere | Any tangent | 2MR²/5 + MR² = 7MR²/5 |
| Thin hollow sphere | Any tangent | 2MR²/3 + MR² = 5MR²/3 |
| Solid cylinder | Line on its curved surface, parallel to its axis | MR²/2 + MR² = 3MR²/2 |
| Thin hollow cylinder | Line on its curved surface, parallel to its axis | MR² + MR² = 2MR² |
| Thin rod, length L | Perpendicular, through one end | ML²/12 + M(L/2)² = ML²/3 |
4.4 Composite bodies and bodies with holes
MI adds when the axis is common. For a body made of parts, find each part's MI about the same axis (using the parallel axis theorem where needed) and add.
For a body with a hole, find the MI of the full body and subtract the MI of the removed piece, both about the same axis. The removed piece's mass is in proportion to its area (for a uniform plate). Its own MI about the axis often needs the parallel axis theorem.
Worked example 4.1: A uniform rod of mass 2 kg and length 1.5 m rotates about a perpendicular axis 0.25 m from its centre. Find the MI.
Solution: I_cm = ML²/12 = 2 × 2.25/12 = 0.375 kg m². Md² = 2 × 0.0625 = 0.125 kg m². I = 0.375 + 0.125 = 0.5 kg m².
Worked example 4.2: A solid ball of mass 2 kg and radius 10 cm turns about a tangent. Find the MI.
Solution: I = 7MR²/5 = 7 × 2 × 0.01/5 = 0.028 kg m².
Worked example 4.3: Use the perpendicular axis theorem to find the MI of a 1 kg disc of radius 20 cm about a diameter.
Solution: I_z = MR²/2 = 1 × 0.04/2 = 0.02 kg m². Two perpendicular diameters share it equally: I_d = 0.02/2 = 0.01 kg m².
Worked example 4.4: Find the ratio of the MI of a ring about a tangent in its plane to its MI about a tangent perpendicular to its plane.
Solution: In-plane tangent: 3MR²/2. Perpendicular tangent: 2MR². Ratio = (3/2) : 2 = 3 : 4.
Worked example 4.5: Find the MI of a uniform square plate of mass M and side a about one of its diagonals.
Solution: I_z (through centre, perpendicular to plate) = M(a² + a²)/12 = Ma²/6. The diagonals are perpendicular and equal by symmetry. So I_diag = (Ma²/6)/2 = Ma²/12.
Worked example 4.6: Three identical uniform rods, each of mass m and length l, form an equilateral triangle. Find the MI about an axis through one vertex, perpendicular to the plane.
Solution: The two rods meeting at the vertex each give ml²/3 (rod about its end). The third rod's midpoint is at the triangle's height, l√3/2, from the vertex. By the parallel axis theorem it gives ml²/12 + m(3l²/4) = 10ml²/12 = 5ml²/6. Total I = 2ml²/3 + 5ml²/6 = 9ml²/6 = 3ml²/2.
Worked example 4.7: A uniform disc of mass M and radius R has a circular hole of radius R/2 cut from it. The hole touches the rim and its centre is R/2 from the disc's centre. Find the MI of the remaining part about the disc's central perpendicular axis.
Solution: The hole has a quarter of the area, so the removed mass is M/4. Its MI about its own centre is (M/4)(R/2)²/2 = MR²/32. Shifting to the disc's axis adds (M/4)(R/2)² = MR²/16 = 2MR²/32. So the removed piece has 3MR²/32 about the axis. The full disc has MR²/2 = 16MR²/32. Remaining I = 16MR²/32 − 3MR²/32 = 13MR²/32.
Worked example 4.8: The MI of a uniform disc about a tangent in its plane is I. Find its MI about a tangent perpendicular to its plane.
Solution: In-plane tangent: 5MR²/4 = I, so MR² = 4I/5. Perpendicular tangent: 3MR²/2 = (3/2)(4I/5) = 6I/5.
Quick revision
Parallel axes: I = I_cm + Md². One axis must pass through the COM. Works for every body.
I_cm is the least MI among all parallel axes.
Perpendicular axes: I_z = I_x + I_y. Lamina only, with x and y axes in its plane.
Ring: diameter MR²/2, in-plane tangent 3MR²/2, perpendicular tangent 2MR².
Disc: diameter MR²/4, in-plane tangent 5MR²/4, perpendicular tangent 3MR²/2.
Sphere tangents: solid 7MR²/5, hollow 5MR²/3.
Square plate: Ma²/6 about the perpendicular central axis, Ma²/12 about any in-plane central axis.
NEET traps
Applying I = I₁ + Md² between two axes when neither passes through the COM.
Using the perpendicular axis theorem for a sphere or a cube.
Subtracting Md² when moving away from the COM. Moving away always adds.
Taking d as the distance from the edge instead of from the COM.
Forgetting the removed part's own MI about its centre in hole problems, and using only Md².
Mixing up the in-plane tangent and the perpendicular tangent of a ring or disc.
Practice MCQs: Chapter 4
Level 1: Concept check
1. The parallel axis theorem states that (a) I = I_cm − Md² (b) I = I_cm + Md² (c) I = I_cm + Md (d) I = Md²
2. The perpendicular axis theorem can be applied to (a) any three-dimensional body (b) spheres only (c) plane laminas (d) rods only
3. The MI of a uniform disc of mass M and radius R about a diameter is (a) MR²/4 (b) MR²/2 (c) MR² (d) 3MR²/2
4. Among all parallel axes, a body has its least MI about the axis (a) farthest from the COM (b) along a tangent (c) none, all are equal (d) through its COM
5. The MI of a thin ring of mass M and radius R about a diameter is (a) MR² (b) 2MR² (c) MR²/2 (d) MR²/4
6. The MI of a solid sphere of mass M and radius R about a tangent is (a) 2MR²/5 (b) 7MR²/5 (c) 5MR²/3 (d) 3MR²/2
7. In the perpendicular axis theorem I_z = I_x + I_y, the z-axis is (a) perpendicular to the plane, through the point where the x and y axes meet (b) any axis in the plane (c) parallel to the x-axis (d) any axis at all
8. Using the parallel axis theorem, the MI of a rod about a perpendicular axis through one end is (a) ML²/6 (b) 7ML²/12 (c) ML²/4 (d) ML²/3
9. The MI of a thin ring about a tangent perpendicular to its plane is (a) 3MR²/2 (b) MR² (c) 2MR² (d) 5MR²/2
10. The parallel axis theorem requires that (a) both axes pass through the COM (b) the axes be parallel, with one through the COM (c) the body be a lamina (d) the axes be perpendicular
Level 2: NEET standard
11. The MI of a uniform disc about a tangent in its own plane is (a) 5MR²/4 (b) 3MR²/2 (c) MR²/4 (d) 3MR²/4
12. A uniform disc of mass 2 kg and radius 0.1 m turns about a tangent perpendicular to its plane. Its MI is (a) 0.01 kg m² (b) 0.02 kg m² (c) 0.03 kg m² (d) 0.05 kg m²
13. A uniform 2 m rod of mass 3 kg turns about a perpendicular axis 0.5 m from one end. Its MI is (a) 1 kg m² (b) 1.25 kg m² (c) 4 kg m² (d) 1.75 kg m²
14. The MI of a uniform square plate of mass M and side a about an axis through its centre, perpendicular to its plane, is (a) Ma²/12 (b) Ma²/6 (c) Ma²/3 (d) 2Ma²/3
15. The MI of a uniform square plate of mass M and side a about a diagonal is (a) Ma²/12 (b) Ma²/6 (c) Ma²/3 (d) Ma²/24
16. A thin hollow sphere of mass 3 kg and radius 0.2 m turns about a tangent. Its MI is (a) 0.08 kg m² (b) 0.12 kg m² (c) 0.2 kg m² (d) 0.28 kg m²
17. The MI of a ring about a diameter is I. Its MI about a tangent in its plane is (a) 2I (b) 3I (c) 3I/2 (d) 4I
18. The MI of a solid cylinder about a line on its curved surface, parallel to its axis, is (a) MR²/2 (b) MR² (c) 2MR² (d) 3MR²/2
19. A uniform rectangular plate of mass 3 kg has sides 0.4 m and 0.3 m. Its MI about an axis through its centre, perpendicular to its plane, is (a) 0.0625 kg m² (b) 0.125 kg m² (c) 0.25 kg m² (d) 0.03125 kg m²
20. The MI of a disc about a tangent perpendicular to its plane is I₀. Its MI about a diameter is (a) I₀/3 (b) I₀/4 (c) I₀/6 (d) I₀/2
21. A solid sphere has MI 0.4 kg m² about a diameter. Its MI about a tangent is (a) 1.4 kg m² (b) 1.0 kg m² (c) 0.56 kg m² (d) 2.0 kg m²
22. A thin ring of mass 0.5 kg and radius 0.2 m turns about a tangent in its plane. Its MI is (a) 0.02 kg m² (b) 0.04 kg m² (c) 0.01 kg m² (d) 0.03 kg m²
Level 3: Challenge
23. Three uniform rods, each of mass m and length l, form an equilateral triangle. The MI about an axis through a vertex, perpendicular to the plane, is (a) ml² (b) 3ml²/2 (c) 5ml²/6 (d) 2ml²
24. A circular hole of radius R/2 is cut from a uniform disc of mass M (before cutting) and radius R. The hole's centre is R/2 from the disc's centre. The MI of the remainder about the disc's central perpendicular axis is (a) 13MR²/32 (b) 15MR²/32 (c) 3MR²/8 (d) 7MR²/16
25. The MI of a disc about a tangent in its plane is I. Its MI about a tangent perpendicular to its plane is (a) 5I/6 (b) 6I/5 (c) 3I/2 (d) 2I
26. Four identical solid spheres, each of mass M and radius R, have their centres at the corners of a square of side a. The MI of the system about an axis along one side of the square is (a) 8MR²/5 + 4Ma² (b) 4MR²/5 + 2Ma² (c) 8MR²/5 + 2Ma² (d) 2MR²/5 + 2Ma²
27. A thin uniform rod of mass M and length L turns about an axis through its centre that makes 30° with the rod. Its MI is (a) ML²/12 (b) ML²/24 (c) ML²/16 (d) ML²/48
28. Four identical thin rods, each of mass m and length l, form a square frame. The MI of the frame about an axis through its centre, perpendicular to its plane, is (a) 4ml²/3 (b) ml²/3 (c) 2ml²/3 (d) 2ml²
29. Assertion (A): The perpendicular axis theorem cannot be used to find the MI of a solid sphere about a diameter. Reason (R): A solid sphere has the same MI about every diameter. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: The MI of a body about any axis is never less than its MI about a parallel axis through its COM. Statement II: The perpendicular axis theorem can be applied to a solid cube. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | b | Standard statement |
| 2 | c | Proof needs z = 0 for every particle |
| 3 | a | 2I_d = MR²/2 |
| 4 | d | Md² ≥ 0, least when d = 0 |
| 5 | c | 2I_d = MR² |
| 6 | b | 2MR²/5 + MR² |
| 7 | a | Definition of the theorem |
| 8 | d | ML²/12 + ML²/4 |
| 9 | c | MR² + MR² |
| 10 | b | Proof uses Σmᵢrᵢ' = 0 about the COM |
| 11 | a | MR²/4 + MR² |
| 12 | c | (3/2) × 2 × 0.01 = 0.03 |
| 13 | d | 1 + 3 × 0.5² = 1.75 |
| 14 | b | M(a² + a²)/12 |
| 15 | a | Half of Ma²/6 |
| 16 | c | (5/3) × 3 × 0.04 = 0.2 |
| 17 | b | I = MR²/2, so I + MR² = 3I |
| 18 | d | MR²/2 + MR² |
| 19 | a | 3 × (0.16 + 0.09)/12 = 0.0625 |
| 20 | c | (MR²/4)/(3MR²/2) = 1/6 |
| 21 | a | (7/5)/(2/5) = 3.5 times 0.4 |
| 22 | d | (3/2) × 0.5 × 0.04 = 0.03 |
| 23 | b | 2(ml²/3) + ml²/12 + 3ml²/4 |
| 24 | a | MR²/2 − [MR²/32 + MR²/16] |
| 25 | b | MR² = 4I/5, then 3MR²/2 |
| 26 | c | 4 × 2MR²/5 + 2 × Ma² |
| 27 | d | (ML²/12) sin² 30° |
| 28 | a | Each rod ml²/12 + m(l/2)² = ml²/3 |
| 29 | b | A holds because a sphere is not a lamina, not because of symmetry |
| 30 | c | I true by I_cm + Md²; a cube is not a lamina |
Chapter 4 revision sheet
One-page summary
Parallel axis theorem: I = I_cm + Md², where d is the distance between the COM axis and a parallel axis.
It works for any body, flat or solid. One of the two axes must pass through the COM.
To go between two axes that both miss the COM, step through the COM: I₂ = I₁ − Md₁² + Md₂².
Of all parallel axes, the one through the COM has the least MI.
Perpendicular axis theorem: I_z = I_x + I_y, for a flat (laminar) body only, with x and y in the plane and all three axes meeting at one point.
It does not work for a solid sphere, cube or cylinder of real thickness.
Ring: diameter MR²/2; tangent in plane 3MR²/2; tangent perpendicular to plane 2MR².
Disc: diameter MR²/4; tangent in plane 5MR²/4; tangent perpendicular to plane 3MR²/2.
Solid sphere about a tangent 7MR²/5; hollow sphere about a tangent 5MR²/3.
Square plate of side a: Ma²/12 about any in-plane axis through its centre (including diagonals); Ma²/6 about the central perpendicular axis.
Square plate: Ma²/3 about an edge; 2Ma²/3 about a perpendicular axis through a corner.
MI adds for parts about the same axis. A hole is handled by subtracting the removed part's MI about that axis.
Must-remember table
| Body | Axis | MI |
|---|---|---|
| Rod (M, L) | perpendicular, through end | ML²/3 |
| Ring | diameter | MR²/2 |
| Ring | tangent in plane | 3MR²/2 |
| Ring | tangent perpendicular to plane | 2MR² |
| Disc | diameter | MR²/4 |
| Disc | tangent in plane | 5MR²/4 |
| Disc | tangent perpendicular to plane | 3MR²/2 |
| Solid sphere | tangent | 7MR²/5 |
| Hollow sphere | tangent | 5MR²/3 |
| Square plate (side a) | central perpendicular / diagonal / edge / corner perpendicular | Ma²/6, Ma²/12, Ma²/3, 2Ma²/3 |
Memory aids
"Centre is cheapest": the COM axis always gives the smallest MI in a family of parallel axes.
"Flat only for Perpendicular": P for perpendicular, P for plane. The theorem needs a plane (laminar) body.
"Half the hoop": a ring or disc's diameter MI is half its central perpendicular MI (by the perpendicular axis theorem).
"Tangent = add one MR²": every tangent axis is the matching central axis plus MR².
"7-5 and 5-3": solid sphere tangent 7/5, hollow sphere tangent 5/3 (2/5 + 1 and 2/3 + 1).
Concept connections
The COM location from Chapter 1 gives the d you need in I = I_cm + Md².
Tangent-axis MI gives the time period of a ring or disc hung from a nail in Physics Book 10: Oscillations and Waves.
Rolling bodies in Chapter 7 can be seen as pure rotation about the contact point, whose MI comes straight from the parallel axis theorem.
Practice MCQs: Chapter 4, Level 4 (new NEET pattern)
31. Match each axis with the MI of a body of mass M and radius R.
List I: A. Ring about a diameter; B. Ring about a tangent in its plane; C. Ring about a tangent perpendicular to its plane; D. Disc about a diameter
List II: (i) 2MR²; (ii) MR²/4; (iii) MR²/2; (iv) 3MR²/2
(a) A-iii, B-i, C-iv, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-ii, B-iv, C-i, D-iii (d) A-iv, B-iii, C-i, D-ii
32. Match each body and tangent axis with its MI as a multiple of MR².
List I: A. Disc, tangent in its plane; B. Disc, tangent perpendicular to its plane; C. Solid sphere, tangent; D. Hollow sphere, tangent
List II: (i) 3/2; (ii) 5/4; (iii) 5/3; (iv) 7/5
(a) A-i, B-ii, C-iv, D-iii (b) A-ii, B-i, C-iii, D-iv (c) A-ii, B-iv, C-i, D-iii (d) A-ii, B-i, C-iv, D-iii
33. Match List I with List II.
List I: A. Parallel axis theorem; B. Perpendicular axis theorem; C. Square plate (side a) about a diagonal; D. Square plate about its central perpendicular axis
List II: (i) Ma²/12; (ii) any body, one axis through the COM; (iii) Ma²/6; (iv) flat bodies only
(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-iv, C-iii, D-i (d) A-ii, B-i, C-iv, D-iii
34. A uniform rod has mass 3 kg and length 2 m. Match each perpendicular axis with the MI about it.
List I: A. Through the centre; B. Through one end; C. 0.5 m from the centre; D. 1.5 m from the centre (outside the rod)
List II: (i) 1.75 kg m²; (ii) 7.75 kg m²; (iii) 4 kg m²; (iv) 1 kg m²
(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-iv, C-i, D-ii (c) A-iv, B-i, C-iii, D-ii (d) A-iv, B-iii, C-i, D-ii
35. How many of the following statements are correct?
A. The parallel axis theorem is I = I_cm + Md².
B. Among parallel axes, MI is least about the one through the COM.
C. The perpendicular axis theorem can be used for a solid sphere.
D. For a square plate, the MI about every in-plane axis through its centre is the same.
E. I₂ = I₁ + Md² holds for any two parallel axes d apart, even if neither passes through the COM.
(a) 3 (b) 2 (c) 4 (d) 5
36. A thin ring has mass M and radius R. Choose the correct set of statements.
A. Its MI about a diameter is MR²/2.
B. Its MI about a tangent in its plane is 3MR²/2.
C. Its MI about a tangent perpendicular to its plane is 3MR²/2.
D. Its MI about a diameter is larger than about its central perpendicular axis.
(a) A, B and C only (b) B and D only (c) A and C only (d) A and B only
37. A uniform rectangular plate of mass M has sides a and b. How many of the following statements are correct?
A. MI about the central axis perpendicular to the plate is M(a² + b²)/12.
B. MI about the central in-plane axis parallel to side b is Ma²/12.
C. The two central in-plane MIs add up to the central perpendicular MI.
D. MI about the side of length b is Ma²/3.
E. MI about a perpendicular axis through a corner is M(a² + b²)/12.
(a) 3 (b) 5 (c) 4 (d) 2
38. A uniform disc has mass 2 kg and radius 0.1 m. Choose the correct set of statements.
A. MI about a diameter is 0.005 kg m².
B. MI about a tangent in its plane is 0.025 kg m².
C. MI about a tangent perpendicular to its plane is 0.02 kg m².
D. MI about its central perpendicular axis is 0.01 kg m².
(a) A, B and C only (b) A, B and D only (c) B, C and D only (d) A and D only
39. For one body, a graph of MI about different parallel axes (y-axis) against d² (x-axis) is a straight line. d is the distance of the axis from the COM. The intercept on the MI axis is 0.2 kg m² and the slope is 4 kg. The mass of the body and its MI about an axis 0.5 m from the COM are
(a) 4 kg, 2.2 kg m² (b) 0.2 kg, 1.2 kg m² (c) 4 kg, 1.0 kg m² (d) 4 kg, 1.2 kg m²
40. For the same body, MI is now plotted against d itself (not d²), for d from −1 m to +1 m. The graph is
(a) a straight line through the origin (b) a parabola opening upward with its lowest point at (0, I_cm) (c) a parabola opening downward with its highest point at (0, I_cm) (d) a horizontal line at I_cm
41. Four bodies each have mass 1 kg and radius 0.2 m. The table gives their MI about a central axis.
| Body | Central axis | I_cm (kg m²) |
|---|---|---|
| Ring | diameter | 0.020 |
| Disc | perpendicular to plane | 0.020 |
| Solid sphere | diameter | 0.016 |
| Hollow sphere | diameter | 0.0267 |
Each body is now turned about a tangent parallel to the axis listed. Which has the largest MI, and what is it?
(a) Ring, 0.060 kg m² (b) Disc, 0.060 kg m² (c) Hollow sphere, 0.0667 kg m² (d) Solid sphere, 0.056 kg m²
Passage for Q42–43: A square tile of side 0.3 m and mass 4 kg is uniform and thin. A craftsman spins it about different axes.
42. Its MI about an axis through its centre, perpendicular to the tile, is
(a) 0.06 kg m² (b) 0.03 kg m² (c) 0.12 kg m² (d) 0.24 kg m²
43. Its MI about an axis through one corner, perpendicular to the tile, is
(a) 0.12 kg m² (b) 0.18 kg m² (c) 0.24 kg m² (d) 0.36 kg m²
44. Two identical uniform rods, each of mass M and length L, are joined at one end to form an L shape (a right angle). The MI of the shape about an axis through the free end of one rod, perpendicular to the plane of the L, is
(a) 2ML²/3 (b) 4ML²/3 (c) 5ML²/3 (d) 7ML²/3
45. Two identical uniform discs, each of mass M and radius R, lie flat in the same plane and touch at their rims. The axis lies in that plane, passes through the point of contact and is perpendicular to the line joining their centres. The total MI about this axis is
(a) 5MR²/2 (b) 3MR² (c) 5MR²/4 (d) MR²/2
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | b | Ring: MR²/2, 3MR²/2, 2MR²; disc diameter MR²/4 |
| 32 | d | Each tangent = central value + MR²: 1/4 + 1, 1/2 + 1, 2/5 + 1, 2/3 + 1 |
| 33 | a | Parallel axis: any body; perpendicular: flat bodies; diagonal Ma²/12; central perpendicular Ma²/6 |
| 34 | d | I_cm = 3 × 4/12 = 1; end 1 + 3 × 1 = 4; 1 + 3 × 0.25 = 1.75; 1 + 3 × 2.25 = 7.75 |
| 35 | a | A, B, D true; C needs a flat body; E needs one axis through the COM |
| 36 | d | Tangent perpendicular = MR² + MR² = 2MR²; diameter MI is half the central perpendicular MI |
| 37 | c | A, B, C, D true; corner axis adds M(a² + b²)/4, giving M(a² + b²)/3 |
| 38 | b | MR² = 0.02: diameter 0.005, tangent in plane 0.025, tangent perpendicular 0.03, central 0.01 |
| 39 | d | Slope = M = 4 kg; I = 0.2 + 4 × 0.25 = 1.2 kg m² |
| 40 | b | I = I_cm + Md² is a parabola in d with minimum I_cm at d = 0 |
| 41 | c | Add Md² = 0.04 to each: 0.06, 0.06, 0.056, 0.0667 kg m² |
| 42 | a | Ma²/6 = 4 × 0.09/6 = 0.06 kg m² |
| 43 | c | 2Ma²/3 = 0.06 + 4 × 0.045 = 0.24 kg m² (corner is a²/2 from the centre in squared distance) |
| 44 | c | Near rod ML²/3; far rod's COM at d² = L² + L²/4: ML²/12 + 5ML²/4 = 4ML²/3; total 5ML²/3 |
| 45 | a | For each disc the axis is a tangent in its plane: 5MR²/4 each, total 5MR²/2 |