Chapter 10 of 10 · 15 min read

Last-Week Revision Kit

Use this kit in the last 7 days: read the glance sheet daily, test yourself on the 40 facts, tick the checklist, then sit Mock Test 2 under exam timing.

Book-at-a-glance sheet

Chapter 1: Thermal Equilibrium, Zeroth Law and Temperature

ItemFormula or value
Scale conversionC/100 = (F − 32)/180 = (K − 273.15)/100
Temperature changeΔC = ΔK = (5/9)ΔF
Any linear scale(X − X_ice)/(X_steam − X_ice) = C/100
Gas thermometerT = 273.16 K × P/P_tr
C = F−40

Chapter 2: Heat, Work and Internal Energy

ItemFormula or value
Work by gasW = ∫P dV = area under P-V curve
Isobaric workPΔV = nRΔT
Straight-line path(P₁ + P₂)(V₂ − V₁)/2
Ideal gas UU = nCvT, depends only on T
State vs pathU state function; Q, W path functions

Chapter 3: First Law of Thermodynamics

ItemFormula or value
First lawQ = ΔU + W
MayerCp − Cv = R; cp − cv = R/M
γ1 + 2/f; 5/3, 7/5, 4/3
Cv and CpR/(γ − 1) and γR/(γ − 1)
Constant P splitΔU/Q = 1/γ; W/Q = 1 − 1/γ
MixtureCv,mix = ΣnCv/Σn

Chapter 4: Thermodynamic Processes

ItemFormula or value
Isothermal worknRT ln(V₂/V₁) = 2.303 nRT log(V₂/V₁)
Adiabatic lawsPV^γ, TV^(γ−1), P^(1−γ)T^γ constant
Adiabatic worknR(T₁ − T₂)/(γ − 1) = (P₁V₁ − P₂V₂)/(γ − 1)
Slopes on P-VIsothermal −P/V; adiabatic −γP/V
Polytropic PV^nC = Cv + R/(1 − n)
CycleΔU = 0; W = Q = loop area; clockwise positive

Chapter 5: Second Law, Reversible and Irreversible Processes

ItemKey idea
Kelvin–PlanckNo engine with η = 1
ClausiusNo fridge without work
ReversibleQuasi-static and no dissipation
Free expansionQ = W = ΔU = 0, T unchanged, not quasi-static

Chapter 6: Heat Engines, Carnot Engine and Refrigerators

ItemFormula or value
Engine efficiencyη = W/Q₁ = 1 − Q₂/Q₁
Carnot efficiency1 − T₂/T₁
Fridge COPQ₂/W; Carnot T₂/(T₁ − T₂)
Heat pump COPQ₁/W = 1 + β; Carnot T₁/(T₁ − T₂)
Linkβ = (1 − η)/η
Series enginesEqual η: √(T₁T₃); equal W: (T₁ + T₃)/2

40 rapid-fire facts

  1. Thermal equilibrium means equal temperature and no net heat flow.

  2. The zeroth law is the logical basis of temperature and thermometers.

  3. An adiabatic wall blocks heat; a diathermic wall passes it.

  4. Ice point is 0 °C, 32 °F, 273.15 K.

  5. Steam point is 100 °C, 212 °F, 373.15 K.

  6. The triple point of water is 273.16 K, or 0.01 °C.

  7. A change of 1 °C equals a change of 1 K.

  8. Celsius and Fahrenheit agree at −40.

  9. Constant-volume gas thermometers using different gases agree at low pressure.

  10. Internal energy of an ideal gas depends only on temperature.

  11. Bulk kinetic energy of the container is not part of internal energy.

  12. Heat and work are path functions; internal energy is a state function.

  13. Work by a gas is the area under the P-V curve.

  14. In this book, Q is positive into the gas and W is positive when done by the gas.

  15. Work at constant volume is zero.

  16. 1 L × 1 kPa = 1 J.

  17. The first law is conservation of energy: Q = ΔU + W.

  18. ΔU = nCvΔT holds for every process of an ideal gas.

  19. Cp − Cv = R for every ideal gas.

  20. γ is 5/3 for monatomic, 7/5 for rigid diatomic and 4/3 for rigid non-linear polyatomic gases.

  21. At constant pressure, a fraction 1/γ of the heat goes into internal energy.

  22. For a gas mixture, average Cv by moles; never average γ.

  23. In boiling at constant temperature, ΔU is not zero.

  24. In an isothermal process of an ideal gas, Q = W and ΔU = 0.

  25. In an adiabatic process Q = 0 and W = −ΔU.

  26. A gas cools when it expands adiabatically and warms when compressed adiabatically.

  27. Through a common point the adiabatic is γ times steeper than the isothermal.

  28. Molar heat capacity is infinite for isothermal and zero for adiabatic processes.

  29. A clockwise cycle on a P-V graph does positive net work.

  30. A straight line through the origin is isochoric on a P-T graph and isobaric on a V-T graph.

  31. No heat engine can turn all the heat it takes in into work in a cycle (Kelvin–Planck).

  32. Heat cannot flow from cold to hot by itself (Clausius).

  33. Work can always be turned completely into heat.

  34. All natural processes are irreversible.

  35. Free expansion of an ideal gas leaves its temperature unchanged.

  36. Carnot efficiency is 1 − T₂/T₁ and does not depend on the working substance.

  37. No engine between two reservoirs is more efficient than a reversible engine.

  38. The COP of a refrigerator can be greater than 1.

  39. A refrigerator rejects Q₂ + W to the room, more than it takes from inside.

  40. Heat pump COP = 1 + refrigerator COP for the same reservoirs.

Common mistakes checklist

  • I always convert °C to kelvin before using PV = nRT, T₂/T₁ or Carnot formulas.

  • I don't add 273 to a temperature change.

  • I don't confuse work done by the gas with work done on the gas.

  • I use ΔU = nCvΔT even when the process is not at constant volume.

  • I don't confuse the Kelvin triple point 273.16 K with the ice point 273.15 K.

  • I average Cv for a mixture, not γ.

  • I can tell clockwise from anticlockwise cycles and give the correct sign of net work.

  • I don't apply PV^γ = constant to free expansion.

  • I don't confuse the refrigerator COP T₂/(T₁ − T₂) with the heat pump COP T₁/(T₁ − T₂).

  • I convert litres to m³ (1 L = 10⁻³ m³) before calculating work in joules.

Mock Test 2: New-pattern paper

30 questions, 35 minutes. Marking: +4 for a correct answer, −1 for a wrong one, 0 if left blank. Take R = 8.3 J mol⁻¹ K⁻¹ and T(K) = t(°C) + 273 unless stated.

1. At what temperature is the Fahrenheit reading exactly twice the Celsius reading? (a) 80 °C (b) 160 °C (c) 320 °C (d) −160 °C

2. How many of the following statements are correct?

  • A. Heat is a path function.

  • B. Temperature is a state variable.

  • C. At fixed temperature, the internal energy of an ideal gas changes with its volume.

  • D. 1 cal is about 4.2 J.

(a) One (b) Two (c) Three (d) Four

3. Match the process in List I with the shape of its curve on a P-V graph in List II.

List I:

  • A. Isobaric

  • B. Isochoric

  • C. Isothermal

  • D. Adiabatic

List II:

  • (i) Vertical line

  • (ii) Curve steeper than a rectangular hyperbola

  • (iii) Horizontal line

  • (iv) Rectangular hyperbola

(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-i, C-ii, D-iv (c) A-iv, B-i, C-iii, D-ii (d) A-iii, B-i, C-iv, D-ii

4. 5 mol of a monatomic ideal gas is heated at constant volume by 20 K. The heat supplied is: (a) 1245 J (b) 2075 J (c) 830 J (d) 415 J

5. On a P-V graph, a gas goes from A (2 L, 2 × 10⁵ Pa) to C (6 L, 4 × 10⁵ Pa) in two ways. Path 1 goes horizontally to B (6 L, 2 × 10⁵ Pa) and then straight up to C. Path 2 is the straight line AC. The work along path 2 minus the work along path 1 is: (a) 0 (b) 200 J (c) 400 J (d) 800 J

6. Assertion (A): For an ideal gas, Cp is greater than Cv. Reason (R): At constant pressure, part of the heat supplied does expansion work. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

7. A rigid diatomic ideal gas absorbs 700 J at constant pressure. The work done by the gas is: (a) 500 J (b) 300 J (c) 700 J (d) 200 J

Case for Q8–9: A cycle tyre holds air at 27 °C and an absolute pressure of 2.0 × 10⁵ Pa. It bursts suddenly and the air expands to 1.0 × 10⁵ Pa so fast that no heat is exchanged. Take γ = 1.4 and 0.5^(2/7) ≈ 0.82.

8. The temperature of the escaping air just after the burst is about: (a) 300 K (b) 246 K (c) 150 K (d) 273 K

9. The air cools because: (a) heat flows out of it to the road (b) its molecules lose mass (c) the pressure outside is lower (d) it does work with no heat input, so its internal energy falls

10. Match the quantity in List I with its SI unit in List II.

List I:

  • A. Molar heat capacity

  • B. Specific heat capacity

  • C. Coefficient of performance

  • D. Specific latent heat

List II:

  • (i) J kg⁻¹

  • (ii) No unit

  • (iii) J kg⁻¹ K⁻¹

  • (iv) J mol⁻¹ K⁻¹

(a) A-iii, B-iv, C-ii, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-iv, B-iii, C-i, D-ii (d) A-iv, B-ii, C-iii, D-i

11. 1 mol of an ideal gas at 400 K expands isothermally to three times its volume. Take ln 3 = 1.099. The work done by the gas is about: (a) 3.65 kJ (b) 1.66 kJ (c) 9.96 kJ (d) 2.30 kJ

12. Choose the correct set of statements about adiabatic processes of an ideal gas.

  • A. The temperature rises in adiabatic compression.

  • B. TV^(γ−1) stays constant.

  • C. Work done by the gas going from T₁ to T₂ is nR(T₂ − T₁)/(γ − 1).

  • D. A fast process in a poorly conducting container is nearly adiabatic.

(a) A and B only (b) B and C only (c) A, B and D only (d) A, B, C and D

13. Two curves X and Y for the same ideal gas pass through one point on a P-V graph. At that point the slope of X is 1.4 times the slope of Y. Then: (a) X is isothermal and the gas is monatomic (b) X is adiabatic and the gas is diatomic (c) Y is adiabatic and the gas is diatomic (d) X is adiabatic and the gas is monatomic

14. 2 mol of a monatomic ideal gas expands adiabatically and its temperature falls from 500 K to 300 K. The work done by the gas is: (a) 3320 J (b) 2490 J (c) 1992 J (d) 4980 J

15. In each cycle an engine absorbs 600 J and rejects 450 J. Its efficiency is: (a) 25% (b) 75% (c) 33% (d) 45%

16. Assertion (A): A Carnot engine can have 100% efficiency if its sink is at 0 °C. Reason (R): The efficiency of a Carnot engine is 1 − T₂/T₁. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

17. Match the law or theorem in List I with its content in List II.

List I:

  • A. Kelvin–Planck statement

  • B. Clausius statement

  • C. Carnot theorem

  • D. First law

List II:

  • (i) Energy is conserved

  • (ii) No engine beats a reversible one between the same reservoirs

  • (iii) No refrigerator works without work input

  • (iv) No heat engine has efficiency 1

(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-iv, C-ii, D-i (c) A-iv, B-iii, C-i, D-ii (d) A-iv, B-ii, C-iii, D-i

18. A Carnot freezer keeps its inside at −23 °C in a room at 27 °C. The work needed to remove 500 J from the inside is: (a) 50 J (b) 600 J (c) 100 J (d) 83 J

19. How many of the following processes are irreversible?

  • A. Two gases mixing in a closed jar

  • B. Heat flowing from a hot iron to a cool cloth

  • C. An electric current heating a resistor

  • D. A very slow, frictionless isothermal compression

The number of irreversible processes is: (a) Two (b) Three (c) One (d) Four

Case for Q20–21: A small power plant uses steam at 227 °C as its source and river water at 27 °C as its sink. Engineers want to know the best the plant could ever do. The boiler supplies 1.0 MW of heat to the engine.

20. The highest possible efficiency is: (a) 88% (b) 60% (c) 40% (d) 12%

21. If the plant ran at this highest efficiency, the heat dumped into the river would be: (a) 0.6 MW (b) 0.4 MW (c) 1.0 MW (d) 0.12 MW

22. The table gives Q and W for three processes of an ideal gas.

ProcessQ (J)W by gas (J)
P10+200
P2+5000
P3+400+400

P1, P2 and P3 are, in order: (a) isothermal expansion, isochoric heating, adiabatic expansion (b) adiabatic compression, isobaric heating, isothermal expansion (c) adiabatic expansion, isobaric heating, isochoric heating (d) adiabatic expansion, isochoric heating, isothermal expansion

23. 1 mol of a monatomic gas is mixed with 1 mol of a rigid diatomic gas. γ of the mixture is: (a) 1.50 (b) 1.53 (c) 1.40 (d) 1.67

24. Each device is reversible. Match List I with the unknown temperature in List II.

List I:

  • A. Engine with η = 0.5 and sink at 300 K: source temperature

  • B. Engine with η = 0.25 and source at 400 K: sink temperature

  • C. Refrigerator with COP 4 in a room at 300 K: inside temperature

  • D. Heat pump with COP 6, delivering heat to a room at 300 K: outside temperature

List II:

  • (i) 250 K

  • (ii) 300 K

  • (iii) 600 K

  • (iv) 240 K

(a) A-iii, B-ii, C-i, D-iv (b) A-ii, B-iii, C-iv, D-i (c) A-iii, B-ii, C-iv, D-i (d) A-iii, B-iv, C-ii, D-i

25. Choose the correct set of statements about cycles.

  • A. ΔU over a complete cycle is zero.

  • B. A clockwise cycle on a P-V graph works as a refrigerator.

  • C. Net heat absorbed in a cycle equals the net work done.

  • D. A Carnot cycle has two isothermal and two adiabatic steps.

(a) A and B only (b) A, C and D only (c) B, C and D only (d) C and D only

26. A P-T graph for the same mass of ideal gas shows two straight lines through the origin. Line 1 (volume V₁) is steeper than line 2 (volume V₂). Then: (a) V₁ < V₂ (b) V₁ > V₂ (c) V₁ = V₂ (d) the graph cannot tell

27. A gas expands from 1 L to 3 L along P = aV with a = 1.0 × 10⁸ Pa m⁻³. The work done by the gas is: (a) 200 J (b) 800 J (c) 400 J (d) 100 J

28. Assertion (A): A gas becomes hotter when it is compressed adiabatically. Reason (R): In an adiabatic process the internal energy of a gas stays constant. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

29. 200 J of heat is given to a gas and its internal energy falls by 50 J. The work done by the gas is: (a) 150 J (b) 250 J (c) −250 J (d) 50 J

30. A Carnot engine has efficiency 1/5. When its sink temperature is lowered by 80 K, with the source unchanged, the efficiency becomes 2/5. The source and sink temperatures at the start were: (a) 500 K and 400 K (b) 480 K and 400 K (c) 320 K and 240 K (d) 400 K and 320 K

Mock Test 2 answer key

QAnsReason
1b2C = 1.8C + 32 gives C = 160
2cA, B, D true; ideal gas U depends only on T
3dHorizontal, vertical, hyperbola, steeper curve
4aQ = 5 × 1.5 × 8.3 × 20 = 1245 J
5cPath 1: 2 × 10⁵ × 4 × 10⁻³ = 800 J; path 2: 3 × 10⁵ × 4 × 10⁻³ = 1200 J
6aCp = Cv + R because of expansion work
7dW/Q = 1 − 1/γ = 2/7; 700 × 2/7 = 200 J
8bT₂ = 300 × 0.5^(2/7) ≈ 246 K
9dQ = 0, so ΔU = −W < 0
10bLatent heat is per kg; COP is a ratio
11aW = 8.3 × 400 × 1.099 ≈ 3648 J
12cCorrect form is nR(T₁ − T₂)/(γ − 1)
13bAdiabatic slope is γ times isothermal; γ = 1.4
14dW = 2 × 8.3 × 200/(2/3) = 4980 J
15aW = 150 J; 150/600 = 0.25
16dNeeds T₂ = 0 K, not 0 °C
17aStandard statements of each law
18cCOP = 250/50 = 5; W = 500/5 = 100 J
19bA, B, C are irreversible; D is nearly reversible
20c1 − 300/500 = 0.4
21aQ₂ = 1.0 − 0.4 = 0.6 MW
22dQ = 0 expansion; W = 0 heating; Q = W means ΔU = 0
23aCv = (1.5R + 2.5R)/2 = 2R; Cp = 3R; γ = 1.5
24c600 K; 300 K; 300 × 4/5 = 240 K; 300 − 300/6 = 250 K
25bClockwise P-V cycle is an engine
26aSlope = nR/V; steeper line means smaller V
27ca(V₂² − V₁²)/2 = 10⁸ × 8 × 10⁻⁶/2 = 400 J
28cAdiabatic means Q = 0; U rises by the work done on the gas
29bW = Q − ΔU = 200 − (−50) = 250 J
30dT₂ = 0.8T₁ and (T₂ − 80) = 0.6T₁ give T₁ = 400 K, T₂ = 320 K
15 min left
‹
›