Chapter 3 of 10 · 23 min read

Chapter 1: Thermal Equilibrium, Zeroth Law and Temperature

What you will learn

  • What a thermodynamic system, its surroundings and its state variables are.

  • What thermal equilibrium means and how to recognise it.

  • The zeroth law and why it gives us the idea of temperature.

  • How the Celsius, Fahrenheit and Kelvin scales are linked, and how to convert between them.

  • How to calibrate any linear thermometer, including a faulty one.

  • How a constant-volume gas thermometer defines absolute temperature.

1.1 System, surroundings and state

Thermodynamics studies heat, work and energy in bulk matter. We do not track single molecules here. We track a few measurable quantities.

A system is the part of the universe we choose to study. Gas inside a pressure cooker is a system. Everything outside it is the surroundings. The wall between them is the boundary.

The condition of a system is fixed by state variables: pressure P, volume V, temperature T, mass and amount n. When these do not change with time, and are the same everywhere in the system, the system is in equilibrium.

State variables are of two kinds:

KindMeaningExamples
ExtensiveDepends on the size of the system; doubles if you join two identical copiesVolume, mass, internal energy, n
IntensiveDoes not depend on sizePressure, temperature, density

A quick test: cut the system in half. If a quantity halves, it is extensive. If it stays the same, it is intensive.

1.2 Walls: adiabatic and diathermic

The type of wall decides whether heat can pass.

  • An adiabatic wall does not let heat through. A good thermos flask comes close.

  • A diathermic wall lets heat through freely. A thin steel tumbler is a good example.

Put hot chai in a steel tumbler on the table. Heat leaks out through the diathermic wall. Pour the same chai into a thermos flask. It stays hot for hours because the wall is nearly adiabatic.

1.3 Thermal equilibrium

Place two bodies in contact through a diathermic wall. Heat flows from one to the other. After some time the flow stops. Their pressure, volume and other properties stop changing.

The two bodies are now in thermal equilibrium. No net heat flows between them.

A glass of cold water left in a room ends up at room temperature. The water and the room air are then in thermal equilibrium.

Note that equilibrium does not need equal heat content or equal internal energy. A bucket of water and a spoon of water at the same temperature are in thermal equilibrium, even though the bucket holds far more energy.

1.4 The zeroth law of thermodynamics

Zeroth law: if two systems A and B are each in thermal equilibrium with a third system C, then A and B are in thermal equilibrium with each other.

Figure 1.1 · Zeroth law set-up: A and B touch C through diathermic walls, with an adiabatic wall between them
Figure 1.1 · Zeroth law set-up: A and B touch C through diathermic walls, with an adiabatic wall between them

Heat can flow only along the two arrows, through C; once both arrows stop carrying heat, A and B are at the same temperature.

In the set-up above, A and B are separated by an adiabatic wall, so no heat passes directly between them. Each touches C through a diathermic wall. Once A and C stop exchanging heat, and B and C stop exchanging heat, the law says A and B would also not exchange heat if the adiabatic wall were made diathermic.

This sounds obvious, but it is a real experimental fact. It was named "zeroth" because it was stated after the first and second laws, yet it is logically more basic.

1.5 Temperature from the zeroth law

The zeroth law tells us that there is a property that is equal for all systems in thermal equilibrium with one another. That property is temperature.

So:

  • Temperature decides the direction of heat flow. Heat flows from higher to lower temperature on its own.

  • Two bodies in thermal equilibrium have equal temperatures, and no other condition is needed.

  • A thermometer works because of the zeroth law. The thermometer is body C. It reaches equilibrium with A, then with B. If it shows the same reading, A and B are at the same temperature, even if they never touch.

Temperature is not the same as heat. Heat is energy in transit because of a temperature difference. Temperature is a state variable that a body has.

1.6 Temperature scales

A thermometer uses a property that changes steadily with temperature: length of a mercury column, resistance of a platinum wire, or pressure of a gas at fixed volume.

To make a scale, we pick two fixed points and divide the gap into equal parts. The usual fixed points are the ice point (pure ice melting at 1 atm) and the steam point (pure water boiling at 1 atm).

Figure 1.2 · Celsius, Fahrenheit and Kelvin scales between the ice point and the steam point
Figure 1.2 · Celsius, Fahrenheit and Kelvin scales between the ice point and the steam point

All three scales span the same physical gap; Fahrenheit simply cuts it into 180 parts instead of 100, and Kelvin shifts the Celsius numbers up by 273.15.

ScaleIce pointSteam pointDivisions between them
Celsius (°C)0100100
Fahrenheit (°F)32212180
Kelvin (K)273.15373.15100

For any two linear scales, the fraction of the way from ice point to steam point is the same:

C−0100=F−32180=K−273.15100\frac{C - 0}{100} = \frac{F - 32}{180} = \frac{K - 273.15}{100}

This gives the standard conversions:

F=95C+32,K=C+273.15F = \frac{9}{5}C + 32, \qquad K = C + 273.15

In NEET numericals, 273 is usually used in place of 273.15.

Temperature differences. A change of 1 °C equals a change of 1 K, and equals a change of 9/5 = 1.8 °F:

ΔC=ΔK=59 ΔF\Delta C = \Delta K = \frac{5}{9}\,\Delta F

1.7 General method for any linear scale

Suppose a scale X reads X₁ at the ice point and X₂ at the steam point. Then for a Celsius temperature C:

X−X1X2−X1=C100\frac{X - X_1}{X_2 - X_1} = \frac{C}{100}

The same formula handles a faulty thermometer. Use its wrong readings at the ice and steam points as X₁ and X₂. The bore is assumed uniform, so the scale is still linear.

1.8 Absolute temperature and the gas thermometer

For a fixed mass of gas held at constant volume, pressure falls in a straight line as the gas is cooled. If you extend this line backward, every gas meets zero pressure at the same point, about −273.15 °C. This point is called absolute zero.

The Kelvin scale starts at absolute zero. It uses one fixed point, the triple point of water, where ice, liquid water and vapour coexist. It is given the exact value 273.16 K (that is 0.01 °C).

For a constant-volume gas thermometer at low pressure:

T=273.16 K×PPtrT = 273.16\ \text{K} \times \frac{P}{P_{tr}}

Here P_tr is the pressure of the gas at the triple point. Kelvin temperature is never negative. Absolute zero cannot be reached in practice, though labs have come very close.

Worked example 1.1: Convert 37 °C (normal body temperature) to °F and K.

Solution: F = (9/5)(37) + 32 = 66.6 + 32 = 98.6 °F. K = 37 + 273.15 = 310.15 K, about 310 K.

Worked example 1.2: At what temperature do the Celsius and Fahrenheit thermometers show the same number?

Solution: Put F = C = x in F = (9/5)C + 32. Then x = 1.8x + 32, so −0.8x = 32 and x = −40. Both read −40 at this temperature.

Worked example 1.3: A temperature drops by 45 °F on a winter night in Delhi. What is the drop in kelvin?

Solution: ΔK = (5/9) × ΔF = (5/9) × 45 = 25 K. Do not add 273 to a difference.

Worked example 1.4: A thermometer with a uniform bore reads 5° in melting ice and 95° in steam at 1 atm. It reads 41° in a cup of water. Find the true Celsius temperature.

Solution: Use (X − X₁)/(X₂ − X₁) = C/100. So (41 − 5)/(95 − 5) = C/100. Then 36/90 = C/100, giving C = 40 °C.

Worked example 1.5: A student defines a scale X with ice point 20 °X and steam point 220 °X. What does 25 °C read on this scale?

Solution: (X − 20)/200 = 25/100. So X − 20 = 50 and X = 70 °X.

Worked example 1.6: In a constant-volume gas thermometer, the gas pressure is 6.0 × 10⁴ Pa at the triple point of water and 8.0 × 10⁴ Pa in a hot bath. Find the bath temperature.

Solution: T = 273.16 × (8.0/6.0) = 273.16 × 1.333 = 364.2 K. In Celsius this is about 91 °C.

Worked example 1.7: 200 g of water at 80 °C is mixed with 300 g of water at 30 °C in an insulated flask. Find the final temperature.

Solution: At equilibrium both parts reach one temperature T. Heat lost by hot water = heat gained by cold water. So 200 × (80 − T) = 300 × (T − 30), since the specific heat cancels. 16000 − 200T = 300T − 9000, so 500T = 25000 and T = 50 °C.

Worked example 1.8: At what temperature is the Kelvin reading equal to the Fahrenheit reading? Use K = C + 273.

Solution: C = K − 273, so F = (9/5)(K − 273) + 32. Put F = K: K = 1.8K − 491.4 + 32. So 0.8K = 459.4 and K = 574.25. Both scales read 574.25 at this temperature.

Quick revision

  • Thermal equilibrium: no net heat flow between bodies in thermal contact; their temperatures are equal.

  • Zeroth law: if A and B are each in equilibrium with C, then A and B are in equilibrium with each other. It defines temperature.

  • Adiabatic wall blocks heat; diathermic wall allows it.

  • C/100 = (F − 32)/180 = (K − 273.15)/100.

  • ΔC = ΔK = (5/9)ΔF. Never add 273 to a temperature change.

  • C = F at −40. K = F at about 574.25.

  • Any linear scale: (X − X₁)/(X₂ − X₁) = C/100.

  • Gas thermometer: T = 273.16 K × P/P_tr.

NEET traps

  • Thinking that equal heat content or equal internal energy means thermal equilibrium. Only equal temperature matters.

  • Adding 273 to a temperature difference. A rise of 20 °C is a rise of 20 K, not 293 K.

  • Mixing up the triple point (273.16 K) with the ice point (273.15 K).

  • Using the wrong number of divisions for Fahrenheit. It is 180 between ice and steam points, not 212.

  • In faulty-thermometer questions, dividing by the true range (100) instead of the faulty range (X₂ − X₁).

  • Calling temperature "a measure of heat". Temperature decides the direction of heat flow; it is not the amount of heat.

Practice MCQs: Chapter 1

Level 1: Concept check

1. The zeroth law of thermodynamics leads directly to the concept of (a) internal energy (b) temperature (c) heat (d) work

2. Two bodies in thermal equilibrium must have the same (a) heat content (b) internal energy (c) temperature (d) specific heat

3. Absolute zero on the Celsius scale is (a) −273.15 °C (b) 273.15 °C (c) −459.67 °C (d) 0 °C

4. The Celsius and Fahrenheit scales show the same reading at (a) 40 (b) −32 (c) 0 (d) −40

5. A rise of 1 °C in temperature equals a rise of (a) 1.8 °F (b) 33.8 °F (c) 274 K (d) 0.56 °F

6. A wall that allows heat to flow through it freely is called (a) adiabatic (b) diathermic (c) insulating (d) rigid

7. The SI unit of thermodynamic temperature is (a) degree Celsius (b) degree Fahrenheit (c) kelvin (d) joule

8. The triple point of water is assigned the value (a) 273.15 K (b) 273.16 K (c) 373.15 K (d) 0.01 K

9. A temperature of 100 °F on the Celsius scale is about (a) 37.8 °C (b) 68 °C (c) 55.6 °C (d) 212 °C

10. A temperature of 310 K on the Fahrenheit scale is (a) 96.8 °F (b) 37 °F (c) 100.4 °F (d) 98.6 °F

Level 2: NEET standard

11. Taking K = C + 273, the Kelvin and Fahrenheit scales show the same reading at (a) 313 K (b) 574.25 K (c) −40 K (d) 459.4 K

12. A thermometer with a uniform bore reads −3° at the ice point and 107° at the steam point. When it reads 52°, the true temperature is (a) 52 °C (b) 47.3 °C (c) 50 °C (d) 55 °C

13. On a scale X, the ice point is 30 °X and the steam point is 180 °X. A temperature of 40 °C reads (a) 70 °X (b) 100 °X (c) 60 °X (d) 90 °X

14. The temperature of a room rises by 27 °F. The rise on the Kelvin scale is (a) 15 K (b) 27 K (c) 300 K (d) 48.6 K

15. In a constant-volume gas thermometer the pressure is 50 kPa at the triple point of water and 75 kPa at an unknown temperature. The unknown temperature is about (a) 182.1 K (b) 409.7 K (c) 373.2 K (d) 546.3 K

16. Bodies A and B are separated by an adiabatic wall. Each is in contact with body C through a diathermic wall. After a long time, (a) A and B are in thermal equilibrium with each other (b) only A is in equilibrium with C (c) A and B have the same internal energy (d) A, B and C have the same heat content

17. The thermometric property used in a constant-volume gas thermometer is (a) volume (b) electrical resistance (c) pressure (d) length of a column

18. 100 g of water at 90 °C is mixed with 300 g of water at 10 °C in an insulated vessel. The final temperature is (a) 40 °C (b) 50 °C (c) 20 °C (d) 30 °C

19. On a scale Y, the ice point is −20 °Y and the steam point is 130 °Y. A temperature of 50 °F reads (a) −5 °Y (b) 5 °Y (c) −15 °Y (d) 55 °Y

20. The Fahrenheit reading is exactly twice the Celsius reading at (a) 80 °C (b) 320 °C (c) 160 °C (d) −40 °C

21. Two bodies are said to be in thermal equilibrium when (a) they hold equal amounts of heat (b) no net heat flows between them when in thermal contact (c) they have equal masses (d) they have equal specific heats

22. A platinum resistance thermometer has resistance 10.00 Ω at 0 °C and 13.90 Ω at 100 °C. Assuming a linear change, a reading of 11.56 Ω means a temperature of (a) 45 °C (b) 36 °C (c) 50 °C (d) 40 °C

Level 3: Challenge

23. Scale X reads 10 at the ice point and 160 at the steam point. The X and Celsius readings are numerically equal at (a) −20 °C (b) 20 °C (c) −10 °C (d) 40 °C

24. A uniform-bore thermometer reads 22° when the true temperature is 20 °C and 85° when it is 80 °C. When it reads 50°, the true temperature is about (a) 48.0 °C (b) 46.7 °C (c) 52.4 °C (d) 50.0 °C

25. A constant-volume gas thermometer shows 60.0 cm of mercury at the ice point and 82.0 cm at the steam point. Using a linear scale, a pressure of 66.6 cm means a temperature of (a) 33 °C (b) 27 °C (c) 30 °C (d) 45 °C

26. Water at 212 °F is cooled so that its temperature falls by 60 K. Its final temperature is (a) 66.7 °C (b) 152 °C (c) 313 °C (d) 40 °C

27. Body A is in thermal equilibrium with body B. Body B is not in thermal equilibrium with body C. Then (a) A is in thermal equilibrium with C (b) A is not in thermal equilibrium with C (c) nothing can be said about A and C (d) A and C have equal internal energies

28. A resistance thermometer follows R = R₀(1 + αt). It reads 5.00 Ω at 0 °C and 5.39 Ω at 100 °C. When it reads 5.78 Ω, the temperature is (a) 156 °C (b) 178 °C (c) 200 °C (d) 222 °C

29. Assertion (A): The temperature of a body measures the total heat stored in it. Reason (R): Heat flows on its own from a body at higher temperature to a body at lower temperature. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: The zeroth law allows a thermometer to tell whether two bodies that never touch are at the same temperature. Statement II: Two bodies with equal internal energies are always in thermal equilibrium. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bEqual property of bodies in mutual equilibrium is temperature
2cEquilibrium needs only equal temperature
3a0 K = −273.15 °C
4dx = 1.8x + 32 gives x = −40
5aΔF = 1.8 ΔC
6bDiathermic walls conduct heat
7cKelvin is the SI base unit
8bTriple point defined as 273.16 K
9a(100 − 32) × 5/9 = 37.8 °C
10d310 K = 37 °C = 98.6 °F
11b0.8K = 459.4 gives K = 574.25
12c(52 + 3)/110 × 100 = 50 °C
13d30 + 40 × (150/100) = 90 °X
14aΔK = (5/9) × 27 = 15 K
15b273.16 × 75/50 = 409.7 K
16aZeroth law: both in equilibrium with C
17cPressure changes at fixed volume
18d(100 × 90 + 300 × 10)/400 = 30 °C
19a50 °F = 10 °C; −20 + 10 × 1.5 = −5 °Y
20c2C = 1.8C + 32 gives C = 160
21bDefinition of thermal equilibrium
22d(11.56 − 10)/3.90 × 100 = 40 °C
23a10 + 1.5C = C gives C = −20
24bReading = 1 + 1.05T; T = 49/1.05 = 46.7 °C
25c(66.6 − 60)/22 × 100 = 30 °C
26d212 °F = 100 °C; 100 − 60 = 40 °C
27bA and B share a temperature that differs from C's
28cEach 0.39 Ω is 100 °C; 0.78 Ω is 200 °C
29dTemperature is not heat content; R is true
30cEqual internal energy does not mean equal temperature

Chapter 1 revision sheet

One-page summary

  • A system is the part of the universe we study; everything else is the surroundings; the two meet at the boundary.

  • State variables (P, V, T, mass, composition) describe a system in equilibrium.

  • An adiabatic wall blocks heat. A diathermic wall lets heat pass.

  • Thermal equilibrium: bodies in contact with no net heat flow. Their temperatures are equal.

  • Zeroth law: A in equilibrium with C, and B in equilibrium with C, means A is in equilibrium with B.

  • The zeroth law is what lets a thermometer work. It defines temperature as a property.

  • Heat flows because of a temperature difference, not because one body has more internal energy.

  • Fixed points: ice point and steam point at 1 atm. Celsius 0 and 100, Fahrenheit 32 and 212, Kelvin 273.15 and 373.15.

  • Conversion: C/100 = (F − 32)/180 = (K − 273.15)/100.

  • For any linear scale X: (X − X_ice)/(X_steam − X_ice) = C/100.

  • Changes: ΔC = ΔK = (5/9)ΔF. Do not add 273 to a change.

  • C and F are equal at −40.

  • Kelvin scale fixed by absolute zero and the triple point of water, 273.16 K (0.01 °C).

  • Constant-volume gas thermometer: T = 273.16 K × P/P_tr. Different gases agree at low pressure.

  • P versus t(°C) for a gas at constant volume is a straight line that meets P = 0 near −273.15 °C.

Must-remember table

QuantityCelsiusFahrenheitKelvin
Ice point032273.15
Steam point100212373.15
Divisions between fixed points100180100
Size of one degree (in kelvin)15/91
Absolute zero−273.15−459.670
Triple point of water0.0132.018273.16

Memory aids

  • "Thirty-two, two-twelve, one-eighty between": F ice point 32, steam point 212, 180 steps.

  • "Minus forty, meet the twins": C and F read the same number only at −40.

  • "Change has no 273": a temperature difference in K equals the difference in °C.

  • ZERO = "Zeroth: Equal Readings Only": the zeroth law only says equal temperature means equilibrium; it says nothing about heat content.

  • "Triple sixteen": triple point is 273.16 K, ice point is 273.15 K.

Concept connections

  • Physics Book 7: Properties of Solids and Liquids uses these scales for thermal expansion, calorimetry and heat transfer.

  • Physics Book 9: Kinetic Theory of Gases links absolute temperature to the average kinetic energy of molecules.

  • Physics Book 1: Physics and Measurement covers kelvin as an SI base unit and conversion of units.

Practice MCQs: Chapter 1, Level 4 (new NEET pattern)

31. Match List I with List II.

List I:

  • A. Ice point on the Fahrenheit scale

  • B. Steam point on the Kelvin scale

  • C. Temperature at which °C and °F readings are equal

  • D. Triple point of water in kelvin

List II:

  • (i) 273.16

  • (ii) −40

  • (iii) 32

  • (iv) 373.15

(a) A-i, B-iv, C-ii, D-iii (b) A-iii, B-ii, C-iv, D-i (c) A-iii, B-iv, C-ii, D-i (d) A-ii, B-iv, C-iii, D-i

32. Match List I with List II.

List I:

  • A. Adiabatic wall

  • B. Diathermic wall

  • C. Thermal equilibrium

  • D. Zeroth law

List II:

  • (i) Gives a basis for defining temperature

  • (ii) Lets heat pass through it

  • (iii) No net heat flow between bodies in contact

  • (iv) Does not let heat pass through it

(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iv, C-iii, D-i (c) A-iv, B-ii, C-i, D-iii (d) A-iii, B-ii, C-iv, D-i

33. Match List I with List II.

List I:

  • A. A rise of 45 F° expressed in C°

  • B. 25 °C expressed in °F

  • C. 300 K expressed in °C

  • D. 50 °C expressed in K

List II:

  • (i) 77

  • (ii) 323.15

  • (iii) 25

  • (iv) 26.85

(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-i, C-ii, D-iv (c) A-iv, B-i, C-iii, D-ii (d) A-iii, B-i, C-iv, D-ii

34. Match the thermometer in List I with its thermometric property in List II.

List I:

  • A. Mercury-in-glass thermometer

  • B. Constant-volume gas thermometer

  • C. Platinum resistance thermometer

  • D. Thermocouple

List II:

  • (i) Electrical resistance

  • (ii) Thermo-emf

  • (iii) Pressure of gas

  • (iv) Length of liquid column

(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iv, B-iii, C-ii, D-i (d) A-iv, B-i, C-iii, D-ii

35. How many of the following statements are correct?

  • A. A change of 1 K is equal to a change of 1 °C.

  • B. A change of 1 °F is larger than a change of 1 °C.

  • C. Absolute zero is −273.15 °C.

  • D. The Kelvin scale is defined using the ice point and the steam point as its two fixed points.

(a) One (b) Two (c) Three (d) Four

36. Choose the correct set of statements.

  • A. The zeroth law is the reason a thermometer can be used to compare temperatures.

  • B. Two bodies at the same temperature must have the same internal energy.

  • C. Heat can flow from a body with less internal energy to a body with more internal energy.

  • D. Two bodies in thermal equilibrium must also be at the same pressure.

(a) A and B only (b) B and D only (c) C and D only (d) A and C only

37. A linear scale X reads 20 X at the ice point and 220 X at the steam point. How many of these statements are correct?

  • A. 50 °C reads 120 X.

  • B. A rise of 1 °C is a rise of 2 X.

  • C. A reading of −20 X is the same as −20 °C.

  • D. A reading of 0 X is −5 °C.

(a) One (b) Two (c) Three (d) Four

38. Choose the correct set of statements about a constant-volume gas thermometer.

  • A. Thermometers using different gases agree closely when the gas pressure is low.

  • B. T = 273.16 K × P/P_tr, where P_tr is the pressure at the triple point of water.

  • C. At the triple point of water the thermometer reads 273.15 K.

  • D. The triple point of water is 0.01 °C.

(a) A, B and D only (b) A and C only (c) B, C and D only (d) A, B, C and D

39. A graph is drawn with the Fahrenheit reading on the y-axis and the Celsius reading on the x-axis. It is a straight line. Its slope and y-intercept are: (a) 5/9 and 32 (b) 1.8 and −32 (c) 5/9 and −32 (d) 1.8 and 32

40. A platinum resistance thermometer gives the readings in this table.

ConditionResistance (Ω)
Melting ice50.0
Steam at 1 atm70.0
Warm oil58.0

Assuming resistance varies linearly with temperature, the temperature of the oil is: (a) 58 °C (b) 40 °C (c) 29 °C (d) 80 °C

41. For a fixed mass of gas at constant volume, P is plotted against t (°C). The line passes through P = 1.000 × 10⁵ Pa at 0 °C and P = 1.366 × 10⁵ Pa at 100 °C. Extended backwards, it meets P = 0 at about: (a) −273 °C (b) −100 °C (c) −373 °C (d) −137 °C

Case for Q42–43: Riya runs a chai stall and builds her own linear scale, called R. Her thermometer reads 10 °R in melting ice and 160 °R in boiling water at 1 atm. She uses it to check milk and chai temperatures through the day.

42. Chai at 70 °C will read on her scale: (a) 105 °R (b) 112 °R (c) 115 °R (d) 120 °R

43. During the morning rush the reading rises by 30 °R. The rise in temperature in kelvin is: (a) 30 K (b) 45 K (c) 15 K (d) 20 K

44. A faulty Celsius thermometer reads 2 °C in melting ice and 98 °C in steam at 1 atm. At what true temperature does it give the correct reading? (a) 25 °C (b) 50 °C (c) 48 °C (d) It is never correct

45. 100 g of water at 80 °C is mixed with 300 g of water at 20 °C in an insulated flask. Ignoring heat loss, the final temperature on the Fahrenheit scale is: (a) 95 °F (b) 35 °F (c) 122 °F (d) 68 °F

Level 4 answer key

QAnsReason
31c32 °F, 373.15 K, −40, 273.16 K
32aAdiabatic blocks heat; diathermic passes it; zeroth law defines temperature
33d25 C°; 77 °F; 26.85 °C; 323.15 K
34bLength, pressure, resistance, emf
35bA and C true; 1 °F = 5/9 °C; Kelvin uses the triple point
36dEqual temperature does not mean equal U or equal pressure
37cX = 20 + 2C: A, B, C true; 0 X = −10 °C
38aTriple point is 273.16 K, not 273.15 K
39dF = 1.8C + 32
40b(58 − 50)/(70 − 50) × 100 = 40 °C
41at = −100 × 1.000/0.366 ≈ −273 °C
42c10 + 150 × 0.70 = 115 °R
43d150 °R = 100 K, so 30 °R = 20 K
44bx = (x − 2) × 100/96 gives x = 50
45aMix at 35 °C = 95 °F
23 min left
‹
›