Chapter 5 of 10 · 24 min read

Chapter 3: First Law of Thermodynamics

What you will learn

  • The first law, Q = ΔU + W, and how to apply it with correct signs.

  • Molar heat capacities Cv and Cp, and why a gas has more than one heat capacity.

  • Why ΔU = nCvΔT holds for every process of an ideal gas.

  • The full derivation of Mayer's relation, Cp − Cv = R.

  • Values of Cv, Cp and γ for monatomic, diatomic and polyatomic gases, and for mixtures.

  • How heat splits into ΔU and W at constant pressure.

3.1 Statement of the first law

Heat and work are two ways of moving energy. Energy is never created or destroyed. Put these together and you get the first law.

First law: heat supplied to a system equals the increase in its internal energy plus the work done by the system.

Q=ΔU+WQ = \Delta U + W

For a tiny step of a process:

dQ=dU+P dVdQ = dU + P\,dV

The first law is the law of conservation of energy applied to heat and work. Q and W each depend on the path, but Q − W = ΔU does not.

Think of a pressure cooker on a gas stove. Heat from the flame enters the cooker (Q > 0). Part of it raises the temperature of water and steam (ΔU > 0). If the weight lifts and steam pushes out, the system also does work on the air outside (W > 0).

3.2 Using the first law: a checklist

  1. Identify the system clearly (usually the gas).

  2. Write the sign of each quantity using the convention: Q > 0 heat in, W > 0 work by the gas.

  3. Use ΔU = Q − W.

  4. For a cycle, ΔU = 0, so net Q = net W.

  5. For an ideal gas, also use ΔU = nCvΔT.

SituationQWΔU
Gas heated in a sealed rigid can+0+
Gas pushes a piston out with no heat flow0+−
Bicycle pump pushed fast0 (nearly)−+
Gas expands slowly, temperature held fixed++0
Complete cyclenet Qnet W = net Q0

3.3 Heat capacity of a gas

The molar heat capacity C is the heat needed to raise the temperature of 1 mol by 1 K:

C=1n dQdTC = \frac{1}{n}\,\frac{dQ}{dT}

For solids and liquids we usually quote one value. For a gas the value depends on the process, because the gas can also do work while it is being heated. Two standard values are used:

  • Cv: molar heat capacity at constant volume.

  • Cp: molar heat capacity at constant pressure.

3.4 Cv and internal energy

At constant volume, dV = 0, so W = 0. The first law gives dQ = dU. So:

Cv=1n(dQdT)V=1ndUdTC_v = \frac{1}{n}\left(\frac{dQ}{dT}\right)_V = \frac{1}{n}\frac{dU}{dT}

For an ideal gas, U depends only on T. So dU = nCv dT is true for any process, not just constant volume:

ΔU=nCv ΔT(every process, ideal gas)\Delta U = n C_v\, \Delta T \quad (\text{every process, ideal gas})

This is the single most useful line in this unit.

3.5 Mayer's relation: derivation

Heat n mol of ideal gas at constant pressure, raising its temperature by dT.

Step 1. From the first law: dQ = dU + P dV.

Step 2. dU = nCv dT, as shown above.

Step 3. From PV = nRT at constant P: P dV = nR dT.

Step 4. Substitute: dQ = nCv dT + nR dT.

Step 5. By definition, at constant pressure dQ = nCp dT. So nCp dT = nCv dT + nR dT. Cancel n dT:

Cp−Cv=RC_p - C_v = R

This is Mayer's relation. Cp is larger because, at constant pressure, some heat goes into work done by the expanding gas.

Per unit mass (specific heats, lower-case c), divide by the molar mass M:

cp−cv=RMc_p - c_v = \frac{R}{M}

3.6 The ratio γ

Define γ = Cp/Cv. Combining with Mayer's relation:

Cv=Rγ−1,Cp=γRγ−1C_v = \frac{R}{\gamma - 1}, \qquad C_p = \frac{\gamma R}{\gamma - 1}

The values depend on how many ways a molecule can store energy (degrees of freedom f). Each one holds (1/2)kT per molecule, giving Cv = (f/2)R. Book 9 (Kinetic Theory) explains this in detail.

Gas typeExamplefCvCpγ
MonatomicHe, Ar3(3/2)R(5/2)R5/3 ≈ 1.67
Diatomic (rigid)O₂, N₂, air5(5/2)R(7/2)R7/5 = 1.40
Polyatomic (non-linear, rigid)CH₄, NH₃63R4R4/3 ≈ 1.33

A useful link: γ = 1 + 2/f.

3.7 How heat splits at constant pressure

At constant pressure, Q = nCpΔT, ΔU = nCvΔT and W = nRΔT. So:

ΔUQ=CvCp=1γ,WQ=1−1γ\frac{\Delta U}{Q} = \frac{C_v}{C_p} = \frac{1}{\gamma}, \qquad \frac{W}{Q} = 1 - \frac{1}{\gamma}
GasΔU : W : Q at constant P
Monatomic3 : 2 : 5
Diatomic5 : 2 : 7
Polyatomic3 : 1 : 4

3.8 Mixture of ideal gases

Internal energies simply add. For n₁ mol of one gas and n₂ mol of another:

Cv,mix=n1Cv1+n2Cv2n1+n2,Cp,mix=Cv,mix+RC_{v,\text{mix}} = \frac{n_1 C_{v1} + n_2 C_{v2}}{n_1 + n_2}, \qquad C_{p,\text{mix}} = C_{v,\text{mix}} + R

Then γ of the mixture = Cp,mix / Cv,mix. Do not average the γ values directly.

3.9 What the first law does not say

The first law allows any process that conserves energy. It does not tell us which way a process goes on its own. Hot chai cooling in a cup obeys the first law. So would cold chai warming up by taking heat from the cooler room, but that never happens. The second law (Chapter 5) handles direction.

Worked example 3.1: A gas absorbs 500 J of heat and does 200 J of work. Find the change in its internal energy.

Solution: ΔU = Q − W = 500 − 200 = 300 J. Internal energy rises by 300 J.

Worked example 3.2: A gas is compressed. 400 J of work is done on it, and it gives out 150 J of heat. Find ΔU.

Solution: Q = −150 J (heat leaves). W = −400 J (work is done on the gas). ΔU = Q − W = −150 − (−400) = +250 J.

Worked example 3.3: Find cp − cv for nitrogen (M = 28 g/mol) in J kg⁻¹ K⁻¹.

Solution: cp − cv = R/M = 8.3/0.028 = 296 J kg⁻¹ K⁻¹. Remember to put M in kg/mol.

Worked example 3.4: 2 mol of a diatomic ideal gas is heated at constant pressure through 50 K. Find Q, ΔU and W.

Solution: Q = nCpΔT = 2 × (7/2)(8.3) × 50 = 2905 J. ΔU = nCvΔT = 2 × (5/2)(8.3) × 50 = 2075 J. W = Q − ΔU = 830 J. Check: W = nRΔT = 2 × 8.3 × 50 = 830 J.

Worked example 3.5: 70 J of heat is given to a diatomic gas at constant pressure. How much goes into work?

Solution: W/Q = 1 − 1/γ = 1 − 5/7 = 2/7. W = (2/7) × 70 = 20 J. The other 50 J raises internal energy.

Worked example 3.6: 1 mol of helium is mixed with 1 mol of oxygen. Find γ for the mixture.

Solution: Cv,mix = (1 × 1.5R + 1 × 2.5R)/2 = 2R. Cp,mix = 2R + R = 3R. γ = 3R/2R = 1.5. Averaging 1.67 and 1.40 would give 1.53, which is wrong.

Worked example 3.7: A gas goes from state A to state B along path 1, absorbing 80 J of heat and doing 30 J of work. Along path 2, it does 10 J of work. (i) How much heat does it absorb along path 2? (ii) It returns from B to A along path 3, with 20 J of work done on it. Find the heat exchanged.

Solution: ΔU(A to B) = 80 − 30 = 50 J for every path. (i) Q₂ = ΔU + W₂ = 50 + 10 = 60 J. (ii) ΔU(B to A) = −50 J, W = −20 J. Q = −50 + (−20) = −70 J. The gas gives out 70 J of heat.

Worked example 3.8: 2.0 g of water at 100 °C becomes steam at the same temperature and 1.0 × 10⁵ Pa. Liquid volume is 1.0 cm³/g and steam volume is 1670 cm³/g. Latent heat = 2256 J/g. Find the work done and ΔU.

Solution: ΔV = 2.0 × (1670 − 1.0) = 3338 cm³ = 3.338 × 10⁻³ m³. W = PΔV = 1.0 × 10⁵ × 3.338 × 10⁻³ = 334 J. Q = 2.0 × 2256 = 4512 J. ΔU = 4512 − 334 = 4178 J. Most of the latent heat goes into pulling the molecules apart, not into work.

Quick revision

  • First law: Q = ΔU + W (Q in, W by system). Cycle: ΔU = 0, Q = W.

  • ΔU = nCvΔT for any process of an ideal gas.

  • Mayer: Cp − Cv = R; per kg: cp − cv = R/M.

  • Cv = R/(γ − 1), Cp = γR/(γ − 1), γ = 1 + 2/f.

  • Monatomic 5/3, diatomic 7/5, non-linear polyatomic 4/3.

  • At constant P: ΔU/Q = 1/γ, W/Q = 1 − 1/γ.

  • Mixture: average Cv weighted by moles, then find γ. Never average γ directly.

NEET traps

  • Mixing up sign conventions. If a question says "work done on the gas", flip its sign before using ΔU = Q − W.

  • Writing ΔU = nCpΔT for an isobaric process. ΔU always uses Cv.

  • Using M in g/mol in cp − cv = R/M. It must be kg/mol.

  • Averaging γ values for a gas mixture.

  • Forgetting that heat at constant volume all goes into ΔU, so Q_v = nCvΔT exactly.

  • Thinking the first law tells the direction of heat flow. It does not.

Practice MCQs: Chapter 3

Level 1: Concept check

1. The first law of thermodynamics is a statement of conservation of (a) momentum (b) mass (c) energy (d) charge

2. Mayer's relation for an ideal gas is (a) Cp + Cv = R (b) Cp − Cv = R (c) Cp/Cv = R (d) CpCv = R

3. For a monatomic ideal gas, γ is about (a) 1.67 (b) 1.40 (c) 1.33 (d) 1.00

4. The molar heat capacity at constant volume of a rigid diatomic ideal gas is (a) 3R/2 (b) 7R/2 (c) 3R (d) 5R/2

5. A system absorbs 300 J of heat and does 100 J of work. The change in internal energy is (a) 400 J (b) −200 J (c) 200 J (d) 300 J

6. Cp is greater than Cv because at constant pressure (a) the gas does work as it expands (b) the molecules attract each other more (c) the internal energy rises more for the same ΔT (d) the pressure falls

7. For an ideal gas in any process, dU equals (a) nCp dT (b) nCv dT (c) P dV (d) nR dT

8. With Q as heat supplied and W as work done by the system, the first law is (a) ΔU = Q + W (b) Q = ΔU − W (c) Q = ΔU + W (d) W = Q + ΔU

9. In terms of γ, the molar heat capacity Cv equals (a) R/(γ − 1) (b) γR/(γ − 1) (c) R(γ − 1) (d) (γ − 1)/R

10. A gas does 50 J of work with no heat exchanged. Its change in internal energy is (a) +50 J (b) zero (c) +100 J (d) −50 J

Level 2: NEET standard

11. 3 mol of a monatomic ideal gas is heated at constant volume from 300 K to 400 K. The heat supplied is (R = 8.3 J mol⁻¹ K⁻¹) (a) 6225 J (b) 3735 J (c) 2490 J (d) 4980 J

12. 140 J of heat is given to a diatomic ideal gas at constant pressure. The work done by the gas is (a) 100 J (b) 56 J (c) 40 J (d) 140 J

13. When a monatomic ideal gas is heated at constant pressure, the fraction of heat that raises its internal energy is (a) 2/5 (b) 5/7 (c) 3/7 (d) 3/5

14. 1 mol of a monatomic gas is mixed with 1 mol of a rigid diatomic gas. γ for the mixture is (a) 1.50 (b) 1.40 (c) 1.54 (d) 1.60

15. For a certain ideal gas, cp − cv = 4150 J kg⁻¹ K⁻¹. Taking R = 8.3 J mol⁻¹ K⁻¹, its molar mass is (a) 4 g/mol (b) 28 g/mol (c) 2 g/mol (d) 32 g/mol

16. 500 J of work is done on a gas, and it gives out 200 J of heat. The change in its internal energy is (a) −300 J (b) +700 J (c) −700 J (d) +300 J

17. An ideal gas has Cp = 29.1 J mol⁻¹ K⁻¹. Taking R = 8.3 J mol⁻¹ K⁻¹, γ is about (a) 1.67 (b) 1.40 (c) 1.33 (d) 1.29

18. Along path 1 from state A to B, a gas absorbs 100 J of heat and does 40 J of work. Along path 2 between the same states it does 15 J of work. The heat absorbed along path 2 is (a) 75 J (b) 115 J (c) 55 J (d) 25 J

19. In Q18, the gas returns from B to A by a third path on which 30 J of work is done on it. In this return, (a) 90 J of heat is absorbed (b) 90 J of heat is released (c) 30 J of heat is released (d) 60 J of heat is absorbed

20. A polyatomic ideal gas has Cv = 3R. Its Cp and γ are (a) 3R and 1 (b) 5R and 5/3 (c) 4R and 4/3 (d) 4R and 3/4

21. 1.0 g of water at 100 °C turns to steam at 1.0 × 10⁵ Pa. Its volume changes from 1.0 cm³ to 1670 cm³. Latent heat = 2256 J/g. The increase in internal energy is about (a) 2256 J (b) 2089 J (c) 2423 J (d) 167 J

22. 4 mol of a rigid diatomic ideal gas is heated at constant pressure through 30 K. The heat supplied is (R = 8.3 J mol⁻¹ K⁻¹) (a) 2490 J (b) 996 J (c) 3486 J (d) 4482 J

Level 3: Challenge

23. 2 mol of helium is mixed with 3 mol of oxygen (rigid diatomic). γ for the mixture is about (a) 1.48 (b) 1.52 (c) 1.44 (d) 1.60

24. 1 mol of an ideal gas is heated at constant pressure. It does 166 J of work and absorbs 581 J of heat. Taking R = 8.3 J mol⁻¹ K⁻¹, γ for the gas is (a) 1.67 (b) 1.33 (c) 1.29 (d) 1.40

25. For an ideal gas with γ = 1.4, cp − cv = 297 J kg⁻¹ K⁻¹. Its specific heat at constant pressure cp is about (a) 742.5 J kg⁻¹ K⁻¹ (b) 297 J kg⁻¹ K⁻¹ (c) 1039.5 J kg⁻¹ K⁻¹ (d) 415.8 J kg⁻¹ K⁻¹

26. Two identical samples of a rigid diatomic gas get equal amounts of heat, one at constant volume and the other at constant pressure. The ratio of temperature rises ΔT(constant V) : ΔT(constant P) is (a) 1.4 (b) 0.71 (c) 1.0 (d) 1.67

27. In one complete cycle, a gas absorbs 400 J of heat and gives out 250 J of heat. The net work done by the gas is (a) 650 J (b) 150 J (c) zero (d) 400 J

28. A rigid diatomic ideal gas at pressure P₀ and volume V₀ is heated at constant pressure until its volume doubles. The heat supplied is (a) 2.5P₀V₀ (b) P₀V₀ (c) 3.5P₀V₀ (d) 1.5P₀V₀

29. Assertion (A): For an ideal gas, Cp is greater than Cv. Reason (R): At constant pressure, part of the heat supplied goes into work done by the expanding gas. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: For an ideal gas, ΔU = nCvΔT holds only for constant-volume processes. Statement II: For one mole of an ideal gas, Cp − Cv = R. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1cQ = ΔU + W is energy conservation
2bDerived from dQ = dU + P dV at constant P
3a(5/2)R/(3/2)R = 5/3
4df = 5 gives Cv = 5R/2
5c300 − 100 = 200 J
6aExtra heat supplies the work of expansion
7bU depends only on T for an ideal gas
8cNCERT convention
9aFrom Cp − Cv = R and Cp = γCv
10dΔU = 0 − 50 = −50 J
11b3 × 1.5 × 8.3 × 100 = 3735 J
12cW/Q = 2/7; (2/7) × 140 = 40 J
13dΔU/Q = 1/γ = 3/5
14aCv = 2R, Cp = 3R, γ = 1.5
15cM = 8.3/4150 = 0.002 kg/mol
16dΔU = −200 − (−500) = +300 J
17bCv = 20.8; 29.1/20.8 = 1.40
18aΔU = 60 J; Q = 60 + 15 = 75 J
19bQ = −60 + (−30) = −90 J
20cCp = 3R + R = 4R; γ = 4/3
21bW = 10⁵ × 1669 × 10⁻⁶ = 167 J; 2256 − 167 = 2089 J
22c4 × 3.5 × 8.3 × 30 = 3486 J
23aCv = 2.1R, Cp = 3.1R, γ = 1.476
24dΔT = 20 K, Cp = 29.05 = 3.5R, γ = 1.4
25ccv = 297/0.4 = 742.5; cp = 1.4 × 742.5 = 1039.5
26aSame Q: ΔTv/ΔTp = Cp/Cv = 1.4
27bCycle: W = 400 − 250 = 150 J
28cQ = (Cp/R)P₀ΔV = 3.5P₀V₀
29aR is the reason for A
30dΔU = nCvΔT holds for every process

Chapter 3 revision sheet

One-page summary

  • First law: Q = ΔU + W, with Q into the system and W done by the system.

  • Differential form: dQ = dU + P dV. It is energy conservation including heat.

  • The first law does not say which way heat flows or whether a process can happen. That is the second law.

  • Cycle: ΔU = 0, so net Q = net W.

  • Rigid vessel: W = 0, so Q = ΔU. Insulated (adiabatic): Q = 0, so ΔU = −W.

  • Molar heat capacity C = (1/n)(dQ/dT). It depends on the process.

  • Cv = (1/n)(dU/dT). For an ideal gas ΔU = nCvΔT in every process, not only at constant volume.

  • Mayer's relation: Cp − Cv = R. Per kg: cp − cv = R/M.

  • Cp > Cv because at constant pressure part of the heat does expansion work.

  • γ = Cp/Cv = 1 + 2/f. Cv = R/(γ − 1), Cp = γR/(γ − 1).

  • γ: monatomic 5/3, rigid diatomic 7/5, rigid non-linear polyatomic 4/3.

  • At constant pressure: ΔU/Q = 1/γ and W/Q = 1 − 1/γ.

  • Mixture: Cv,mix = (n₁Cv₁ + n₂Cv₂)/(n₁ + n₂); then Cp,mix = Cv,mix + R and γ = Cp/Cv. Never average γ.

  • For solids and liquids Cp ≈ Cv because the volume change is tiny.

  • Boiling: temperature is constant but ΔU is not zero, because the latent heat breaks molecular bonds.

Must-remember table

GasfCvCpγΔU/Q at constant P
Monatomic (He, Ar)3(3/2)R(5/2)R5/33/5
Rigid diatomic (N₂, O₂, air)5(5/2)R(7/2)R7/55/7
Rigid non-linear polyatomic (CH₄, NH₃)63R4R4/33/4
Any ideal gasf(f/2)R(f/2 + 1)R1 + 2/f1/γ

Memory aids

  • "QUW, queue up work": Q = ΔU + W, heat pays for U first, then work.

  • "3-5-7 for 1-2": monatomic Cv, Cp are 3/2 R and 5/2 R; diatomic 5/2 R and 7/2 R. Each step adds R.

  • "Gamma Gets Smaller with Size": γ falls from 5/3 to 7/5 to 4/3 as molecules get more atoms.

  • "Mix the C, never the gamma": average Cv by moles, then compute γ.

  • "Pressure Pays extra": Cp is larger because the gas Pays expansion work at constant Pressure.

Concept connections

  • Physics Book 9: Kinetic Theory of Gases derives Cv = (f/2)R from equipartition of energy.

  • Chemistry Book 4: Chemical Thermodynamics uses ΔH = ΔU + Δn_gRT, the chemistry form of Cp − Cv = R.

  • Physics Book 7: Properties of Solids and Liquids covers specific heat and latent heat used in first-law problems.

Practice MCQs: Chapter 3, Level 4 (new NEET pattern)

31. Match the gas in List I with its γ in List II (all rigid molecules).

List I:

  • A. Helium

  • B. Nitrogen

  • C. Methane

  • D. A gas whose molecules have 7 degrees of freedom

List II:

  • (i) 4/3

  • (ii) 9/7

  • (iii) 5/3

  • (iv) 7/5

(a) A-iii, B-i, C-iv, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-iv, C-i, D-ii

32. Match List I with List II.

List I:

  • A. Cv of a monatomic gas

  • B. Cp of a rigid diatomic gas

  • C. Cp − Cv for any ideal gas

  • D. Cv of a gas with γ = 4/3

List II:

  • (i) R

  • (ii) 3R

  • (iii) (7/2)R

  • (iv) (3/2)R

(a) A-iv, B-iii, C-i, D-ii (b) A-iv, B-ii, C-i, D-iii (c) A-i, B-iii, C-iv, D-ii (d) A-iii, B-iv, C-i, D-ii

33. A gas is heated at constant pressure. Match List I with List II.

List I:

  • A. ΔU/Q for a diatomic gas

  • B. W/Q for a diatomic gas

  • C. ΔU/Q for a monatomic gas

  • D. W/Q for a monatomic gas

List II:

  • (i) 2/5

  • (ii) 5/7

  • (iii) 3/5

  • (iv) 2/7

(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iv, C-i, D-iii (c) A-ii, B-iv, C-iii, D-i (d) A-iii, B-iv, C-ii, D-i

34. Match the situation in List I with the form the first law takes in List II.

List I:

  • A. A complete cycle

  • B. Gas heated in a rigid vessel

  • C. Gas expanding inside insulated walls

  • D. Ideal gas rushing into vacuum inside an insulated box

List II:

  • (i) ΔU = −W

  • (ii) Q = W

  • (iii) Q = W = ΔU = 0

  • (iv) Q = ΔU

(a) A-ii, B-i, C-iv, D-iii (b) A-ii, B-iv, C-i, D-iii (c) A-iii, B-iv, C-i, D-ii (d) A-ii, B-iv, C-iii, D-i

35. How many of the following statements are correct?

  • A. Cp is greater than Cv for an ideal gas because at constant pressure part of the heat does work.

  • B. Cp − Cv = R holds for every ideal gas.

  • C. For a solid, Cp and Cv are nearly equal.

  • D. γ of a monatomic gas is less than γ of a diatomic gas.

(a) One (b) Two (c) Three (d) Four

36. Choose the correct set of statements.

  • A. ΔU = nCvΔT holds only for constant-volume processes.

  • B. For unit mass, cp − cv = R/M.

  • C. γ = 1 + 2/f, where f is the number of degrees of freedom.

  • D. γ of a gas mixture is the mole-weighted mean of the γ values.

(a) A and B only (b) C and D only (c) A, B and C only (d) B and C only

37. How many of the following statements are correct?

  • A. The first law is a statement of conservation of energy.

  • B. The first law tells us the direction in which heat flows.

  • C. In a cycle, the net heat given to a gas equals the net work done by it.

  • D. When a gas does work adiabatically, its internal energy increases.

(a) One (b) Two (c) Three (d) Four

38. 1 g of water at 100 °C becomes steam at 1.0 × 10⁵ Pa. Latent heat = 2256 J/g and the volume increases by 1671 cm³. Choose the correct set of statements.

  • A. The work done by the water against the atmosphere is about 167 J.

  • B. The rise in internal energy is about 2089 J.

  • C. The temperature does not change, so ΔU = 0.

  • D. Most of the latent heat goes into internal energy, not work.

(a) A, B and D only (b) A and C only (c) B and D only (d) A, B, C and D

39. For 2 mol of an ideal gas heated at constant pressure, a graph of heat supplied Q (y-axis) against temperature rise ΔT (x-axis) is a straight line through the origin with slope 58.1 J/K. Take R = 8.3 J mol⁻¹ K⁻¹. The gas is most likely: (a) monatomic, γ = 5/3 (b) rigid diatomic, γ = 7/5 (c) polyatomic, γ = 4/3 (d) monatomic, γ = 7/5

40. A student heats 1 mol of a gas twice, each time by 10 K. The data are in the table. Take R = 8.3 J mol⁻¹ K⁻¹.

ConditionHeat supplied (J)
Constant volume249
Constant pressure332

The gas has: (a) γ = 5/3, monatomic (b) γ = 7/5, diatomic (c) γ = 4/3 and Cp − Cv = 2R (d) γ = 4/3, rigid non-linear polyatomic

41. The internal energy U of 2 mol of an ideal gas is plotted against T. The graph is a straight line through the origin with slope 41.5 J/K. Take R = 8.3 J mol⁻¹ K⁻¹. Cp of the gas is: (a) 29.05 J mol⁻¹ K⁻¹ (b) 20.75 J mol⁻¹ K⁻¹ (c) 49.8 J mol⁻¹ K⁻¹ (d) 41.5 J mol⁻¹ K⁻¹

Case for Q42–43: For a Diwali science fair, a student fills a sealed steel can with 2 mol of helium and 1 mol of nitrogen. She wants to know how the mixture behaves when it is warmed. Treat both as ideal gases with rigid molecules. Take R = 8.3 J mol⁻¹ K⁻¹.

42. γ of the mixture is: (a) 1.53 (b) 1.60 (c) 17/11 (d) 11/7

43. The heat needed to warm the mixture in the sealed can by 10 K is about: (a) 373.5 J (b) 456.5 J (c) 705.5 J (d) 581 J

44. When an ideal gas is heated at constant pressure, it absorbs 300 J and its internal energy rises by 180 J. The number of degrees of freedom of each molecule is: (a) 3 (b) 5 (c) 6 (d) 7

45. For a certain ideal gas, cp − cv = 4150 J kg⁻¹ K⁻¹. Take R = 8.3 J mol⁻¹ K⁻¹. The gas is: (a) helium (b) nitrogen (c) hydrogen (d) oxygen

Level 4 answer key

QAnsReason
31d5/3, 7/5, 4/3 and 1 + 2/7 = 9/7
32a3R/2, 7R/2, R, and R/(γ − 1) = 3R
33cΔU/Q = 1/γ, W/Q = 1 − 1/γ
34bCycle Q = W; rigid Q = ΔU; insulated ΔU = −W; free expansion all zero
35cA, B, C true; γ(mono) = 1.67 > 1.40
36dΔU = nCvΔT for any process; never average γ
37bA and C true; adiabatic work by gas lowers U
38aW = 10⁵ × 1.671 × 10⁻³ ≈ 167 J; ΔU ≈ 2089 J
39bCp = 58.1/2 = 29.05 = 3.5R
40dCv = 24.9 = 3R, Cp = 33.2 = 4R, γ = 4/3
41aCv = 41.5/2 = 20.75 = 2.5R, Cp = 3.5R = 29.05
42cCv,mix = (3R + 2.5R)/3 = 11R/6; γ = 17/11 ≈ 1.545
43bQ = 5.5R × 10 = 456.5 J
44a1/γ = 0.6, γ = 5/3, f = 3
45cM = 8.3/4150 = 0.002 kg/mol
24 min left
‹
›