Chapter 2 of 10 · 5 min read

Exam Strategy

Thermodynamics usually gives about 2–3 questions in NEET Physics, and its ideas (first law, Cp and Cv, efficiency) also feed Kinetic Theory and Chemical Thermodynamics. Study it formula-first: learn each process as a row of Q, W, ΔU and C, then drill P-V graphs until you can read work and heat at a glance.

Chapter weightage and priority

ChapterTypical NEET questionsPriorityWhy
1. Thermal Equilibrium, Zeroth Law and Temperature0–1LowScale conversions and the zeroth law appear now and then as quick marks
2. Heat, Work and Internal Energy0–1MediumWork as area under a P-V graph is reused in almost every later question
3. First Law of Thermodynamics1HighΔU = Q − W, Mayer's relation, γ of gases and mixtures are asked often
4. Thermodynamic Processes1–2HighIsothermal and adiabatic work, PV^γ = constant, cyclic processes and graphs are NEET favourites
5. Second Law, Reversible and Irreversible Processes0–1LowStatement-type questions on Kelvin–Planck, Clausius and free expansion
6. Heat Engines, Carnot Engine and Refrigerators1HighCarnot efficiency and COP numericals come almost every few years

Weightage is approximate, based on recent papers; NEET can ask from any part of the syllabus.

High-yield topics

  • First law with signs: given two of Q, W and ΔU, find the third; watch whether work is by or on the gas.

  • ΔU = nCvΔT for any process: asked as "find ΔU in an isobaric or polytropic process".

  • Mayer's relation and γ: Cp − Cv = R; γ for monatomic, diatomic and a mixture of gases.

  • Fraction of heat at constant pressure: ΔU/Q = 1/γ and W/Q = 1 − 1/γ (for diatomic, 5/7 and 2/7).

  • Isothermal work: W = nRT ln(V₂/V₁) = 2.303 nRT log(V₂/V₁); ΔU = 0 so Q = W.

  • Adiabatic relations: PV^γ, TV^(γ−1) and P^(1−γ)T^γ constant; final temperature or pressure after compression.

  • Adiabatic work: W = nR(T₁ − T₂)/(γ − 1); sign tells expansion or compression.

  • Slopes on P-V: adiabatic slope is γ times the isothermal slope at the same point.

  • Cyclic processes: ΔU = 0, net Q = net W = area of the loop; clockwise on P-V means positive work.

  • Polytropic process PV^n: molar heat capacity C = Cv + R/(1 − n).

  • Carnot engine: η = 1 − T₂/T₁ (kelvin), and "sink lowered, find new efficiency" type questions.

  • Refrigerator and heat pump: β = Q₂/W = T₂/(T₁ − T₂); heat pump COP = β + 1.

Question types to expect

TypeWhat it looks likeHow to approach
NumericalFind W, Q, ΔU, final T, η or COP from given dataWrite the process first, then the matching formula; convert to kelvin and SI before substituting
Conceptual"Which quantity is zero in an isothermal process?"Recall the process table (Q, W, ΔU, C)
Statement-based"How many of the following are correct?"Judge each statement alone; mark T or F in the margin before counting
Match-the-columnProcesses with equations or heat capacitiesFix the one match you are surest of, then eliminate options
Assertion–ReasonA on adiabatic cooling, R on work doneCheck A and R separately, then ask "does R cause A?"
Graph/diagram-basedP-V, V-T or P-T graphs, loops and slopesIdentify the axes first; a line through origin on V-T is isobaric, on P-T is isochoric

Study plan

DayWhat to studyPractice target
1Chapter 1: scales, zeroth law, gas thermometerLevel 1–2 MCQs of Chapter 1 + 10 conversions
2Chapter 2: heat, work, internal energy, work from P-V areaChapter 2 Levels 1–3; draw 5 P-V paths and find their work
3Chapter 3: first law, Cv, Cp, γ, mixturesChapter 3 Levels 1–3; make your own Cv/Cp/γ table from memory
4Chapter 4: isochoric, isobaric, isothermal, adiabatic, polytropicChapter 4 Levels 1–2 + all derivations written once
5Chapter 4 cyclic processes + Chapter 5 second lawChapter 4 Level 3 and Chapter 5 Levels 1–3
6Chapter 6: engines, Carnot, refrigerators, COPChapter 6 Levels 1–3 + Level 4 sets of Chapters 1–3
7Full revision with the revision sheetsLevel 4 sets of Chapters 4–6, then the Unit Test in 50 minutes

Last 48 hours:

  1. Day −2: read every chapter revision sheet and the Book-at-a-glance sheet; redo only the MCQs you got wrong.

  2. Day −1 morning: Mock Test 2 in 35 minutes; check every slip against the Common mistakes checklist.

  3. Day −1 evening: recite the process table, Carnot and COP formulas, and the γ values once aloud; then rest.

Time-saving tricks

  • Constant-pressure ratio: Q : ΔU : W = Cp : Cv : R. For a diatomic gas this is 7 : 5 : 2, for a monatomic gas 5 : 3 : 2. One ratio gives all three.

  • Isothermal shortcut: ΔU = 0, so Q = W. If the options show a non-zero ΔU for an isothermal ideal-gas process, cut it at once.

  • Loop direction: on a P-V graph (V on x-axis), clockwise loop = positive net work by gas. If the axes are swapped (P on x-axis), the rule flips.

  • Polytropic ladder: C = Cv + R/(1 − n). n = 0 gives Cp, n = 1 gives infinity, n = γ gives 0, n very large gives Cv. Use it to check any heat-capacity option.

  • Engine–fridge link: for a Carnot pair between the same temperatures, β = (1 − η)/η. Efficiency 1/5 means COP 4 at once.

  • Kelvin check: if an efficiency option comes out above 1 or a COP comes out negative, you used °C. Redo in kelvin.

  • Mixture γ: add n·Cv for all gases, divide by total moles, then add R for Cp. Do not average γ values directly.

  • Same ΔT, two paths: ΔU is the same for any path; only Q and W change. Compare paths by the area under the P-V curve.

5 min left
‹
›