Unit Test: Thermodynamics
45 questions · 50 minutes · +4 for a correct answer, −1 for a wrong answer. Take R = 8.3 J mol⁻¹ K⁻¹, ln 2 = 0.693, and use K = C + 273 unless stated.
1. A thermometer can compare the temperatures of two bodies that never touch. This rests on the (a) first law (b) zeroth law (c) second law (d) law of conservation of mass
2. A temperature of 59 °F on the Kelvin scale is (a) 288 K (b) 332 K (c) 300 K (d) 278 K
3. A uniform-bore thermometer reads 4° at the ice point and 84° at the steam point. When it reads 44°, the true temperature is (a) 44 °C (b) 40 °C (c) 55 °C (d) 50 °C
4. A gas expands at a constant pressure of 3.0 × 10⁵ Pa from 2.0 L to 4.5 L. The work done by the gas is (a) 75 J (b) 750 J (c) 7500 J (d) 600 J
5. The internal energy of 4 mol of a monatomic ideal gas at 250 K is (a) 8300 J (b) 20 750 J (c) 12 450 J (d) 4150 J
6. A gas goes along a straight line on the P-V diagram from (1.0 × 10⁵ Pa, 2.0 L) to (5.0 × 10⁵ Pa, 4.0 L). The work done by the gas is (a) 600 J (b) 1000 J (c) 200 J (d) 800 J
7. 250 J of heat is given to a gas and 150 J of work is done on it. The change in its internal energy is (a) 100 J (b) −100 J (c) 400 J (d) 250 J
8. For an ideal gas with γ = 1.5, the molar heat capacity at constant volume is (a) 2R (b) 3R (c) 1.5R (d) R
9. 3 mol of a rigid diatomic gas is heated at constant pressure through 20 K. The increase in its internal energy is (a) 1743 J (b) 498 J (c) 747 J (d) 1245 J
10. A non-linear polyatomic gas (γ = 4/3) is heated at constant pressure. The fraction of the heat that goes into work is (a) 1/4 (b) 3/4 (c) 1/3 (d) 2/7
11. 1 mol of helium is mixed with 2 mol of nitrogen (rigid diatomic). γ of the mixture is about (a) 1.53 (b) 1.46 (c) 1.50 (d) 1.42
12. 3 mol of an ideal gas at 350 K is compressed isothermally to half its volume. In this process the gas (a) gives out about 6039 J of heat (b) absorbs about 6039 J of heat (c) gives out about 3020 J of heat (d) exchanges no heat
13. A monatomic ideal gas at 300 K expands adiabatically to 8 times its volume. Its final temperature is (a) 37.5 K (b) 150 K (c) 75 K (d) 600 K
14. A rigid diatomic gas at pressure P₀ is compressed adiabatically to 1/32 of its volume. Its final pressure is (a) 128P₀ (b) 32P₀ (c) 64P₀ (d) 256P₀
15. In an adiabatic compression, the temperature of 1 mol of a rigid diatomic gas rises from 300 K to 400 K. The work done on the gas is (a) 830 J (b) 2075 J (c) 2905 J (d) 1245 J
16. In a rigid 2.0 L vessel, the pressure of a monatomic gas rises from 1.0 × 10⁵ Pa to 3.0 × 10⁵ Pa on heating. The heat supplied is (a) 400 J (b) 1000 J (c) 600 J (d) zero
17. A monatomic gas at a constant pressure of 2.0 × 10⁵ Pa expands from 1.0 L to 3.0 L. The heat supplied is (a) 400 J (b) 600 J (c) 1400 J (d) 1000 J
18. A gas goes round a triangle on the P-V diagram: (1 L, 2 × 10⁵ Pa) to (4 L, 2 × 10⁵ Pa) to (4 L, 6 × 10⁵ Pa) and straight back to the start. The net work done by the gas per cycle is (a) +600 J (b) −600 J (c) +1200 J (d) −1200 J
19. At a common point, the ratio of the slope of an adiabat to that of an isotherm for a monatomic gas is (a) 3/5 (b) 1 (c) 5/3 (d) 7/5
20. The molar heat capacity of a rigid diatomic gas in the process PV³ = constant is (a) 2R (b) 3R (c) 1.5R (d) 2.5R
21. 2 mol of an ideal gas is heated from 300 K to 500 K with its volume proportional to its temperature. The work done by the gas is (a) 1660 J (b) 3320 J (c) 6640 J (d) 8300 J
22. On a V-T graph, a straight line through the origin represents (a) an isochoric process (b) an isothermal process (c) an adiabatic process (d) an isobaric process
23. An ideal gas at temperature T expands freely into vacuum in an insulated vessel, doubling its volume. Its final temperature is (a) T/2 (b) T (c) 2T (d) T/2^(γ−1)
24. Which of these is irreversible? (a) very slow frictionless isothermal compression (b) current flowing through a resistor and heating it (c) very slow frictionless adiabatic expansion (d) an ideal Carnot cycle
25. An engine is claimed to take heat from a single reservoir and turn all of it into work in each cycle, with no other effect. This breaks the (a) first law (b) zeroth law (c) second law (d) no law
26. 2 mol of an ideal gas at 300 K expands isothermally from 4.0 × 10⁵ Pa to 1.0 × 10⁵ Pa against a constant outside pressure of 1.0 × 10⁵ Pa. The work done by the gas is (a) 3735 J (b) 6904 J (c) 4980 J (d) 1245 J
27. The efficiency of a Carnot engine working between 327 °C and 27 °C is (a) 92% (b) 50% (c) 8% (d) 45%
28. An engine takes 2500 J of heat per cycle and does 750 J of work. The heat it rejects per cycle is (a) 3250 J (b) 750 J (c) 1750 J (d) 2500 J
29. The COP of a Carnot refrigerator working between 0 °C and 30 °C is about (a) 9.1 (b) 10.1 (c) 0.11 (d) 1.1
30. A Carnot engine has efficiency 20%. Run as a heat pump between the same reservoirs, its COP (heat delivered to the hot side per unit work) is (a) 4 (b) 0.25 (c) 5 (d) 0.2
31. A Carnot engine with its source at 500 K has efficiency 30%. Its sink temperature is (a) 150 K (b) 350 K (c) 300 K (d) 400 K
32. A refrigerator removes 1000 J of heat from its inside using 250 J of work. Its COP is (a) 4 (b) 5 (c) 0.25 (d) 1.25
33. A Carnot engine absorbs 900 J per cycle from a source at 450 K and rejects heat to a sink at 300 K. The work done per cycle is (a) 600 J (b) 300 J (c) 450 J (d) 900 J
34. Two Carnot engines run in series between 1000 K and 250 K and have equal efficiencies. The intermediate temperature is (a) 625 K (b) 750 K (c) 400 K (d) 500 K
35. The heat needed to raise the temperature of 2 mol of an ideal gas with γ = 1.4 by 10 K at constant volume is (a) 415 J (b) 581 J (c) 166 J (d) 830 J
36. A rigid diatomic gas is at 2.0 × 10⁵ Pa. Its adiabatic bulk modulus is (a) 2.0 × 10⁵ Pa (b) 1.4 × 10⁵ Pa (c) 2.8 × 10⁵ Pa (d) 4.0 × 10⁵ Pa
37. A gas at pressure P₀ and volume V expands to 3V with its pressure staying proportional to its volume. The work done by the gas is (a) 2P₀V (b) 8P₀V (c) 3P₀V (d) 4P₀V
38. Some heat given to a monatomic ideal gas at constant pressure raises its temperature by 10 K. The same heat given at constant volume would raise it by about (a) 6 K (b) 10 K (c) 16.7 K (d) 25 K
39. In one cycle, a gas absorbs 300 J in an isochoric step and 500 J in an isothermal step, and rejects 600 J in an isobaric step. The efficiency of the cycle is (a) 25% (b) 33% (c) 20% (d) 75%
40. A Carnot engine has efficiency 40%. If its source temperature (in K) is doubled with the sink fixed, its efficiency becomes (a) 80% (b) 70% (c) 60% (d) 55%
41. Air (γ = 1.4) at 27 °C is compressed adiabatically and reaches 927 °C. The compression ratio V₁/V₂ is (a) 4 (b) 16 (c) 32 (d) 64
42. A Carnot freezer works between 250 K and a room at 300 K. If the freezer is set to 200 K instead, with the room unchanged, its COP becomes (a) 4 (b) 3 (c) 2.5 (d) 2
43. Assertion (A): Air rising in the atmosphere cools as it goes up. Reason (R): Rising air expands nearly adiabatically and does work at the cost of its internal energy. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
44. Assertion (A): In an isothermal process, the heat supplied to an ideal gas is zero. Reason (R): The internal energy of an ideal gas does not change in an isothermal process. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
45. Statement I: An adiabatic process can be irreversible. Statement II: A Carnot engine can reach 100% efficiency if its source is made hot enough. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | b | Zeroth law defines temperature |
| 2 | a | 59 °F = 15 °C = 288 K |
| 3 | d | (44 − 4)/80 × 100 = 50 °C |
| 4 | b | 3 × 10⁵ × 2.5 × 10⁻³ = 750 J |
| 5 | c | 1.5 × 4 × 8.3 × 250 = 12 450 J |
| 6 | a | 3 × 10⁵ × 2 × 10⁻³ = 600 J |
| 7 | c | Q = 250, W = −150; ΔU = 400 J |
| 8 | a | R/(γ − 1) = R/0.5 = 2R |
| 9 | d | 3 × 2.5 × 8.3 × 20 = 1245 J |
| 10 | a | 1 − 1/γ = 1 − 3/4 = 1/4 |
| 11 | b | Cv = 6.5R/3, Cp = 9.5R/3, γ = 19/13 = 1.46 |
| 12 | a | nRT ln 2 = 3 × 8.3 × 350 × 0.693 = 6039 J, released |
| 13 | c | 300/8^(2/3) = 300/4 = 75 K |
| 14 | a | 32^1.4 = 2^7 = 128 |
| 15 | b | nCvΔT = 2.5 × 8.3 × 100 = 2075 J |
| 16 | c | Q = (3/2)VΔP = 1.5 × 2 × 10⁻³ × 2 × 10⁵ = 600 J |
| 17 | d | Q = (5/2)PΔV = 2.5 × 400 = 1000 J |
| 18 | b | Expansion at low P, so anticlockwise; area 600 J |
| 19 | c | Ratio = γ = 5/3 |
| 20 | a | 2.5R + R/(1 − 3) = 2R |
| 21 | b | Isobaric: nRΔT = 2 × 8.3 × 200 = 3320 J |
| 22 | d | V/T constant means P constant |
| 23 | b | Q = 0, W = 0, ΔU = 0 |
| 24 | b | Joule heating is dissipative |
| 25 | c | Kelvin–Planck statement |
| 26 | a | nRT(1 − 1/4) = 2 × 8.3 × 300 × 0.75 = 3735 J |
| 27 | b | 1 − 300/600 = 0.5 |
| 28 | c | 2500 − 750 = 1750 J |
| 29 | a | 273/30 = 9.1 |
| 30 | c | Q₁/W = 1/η = 5 |
| 31 | b | T₂ = 500 × 0.7 = 350 K |
| 32 | a | 1000/250 = 4 |
| 33 | b | η = 1/3; W = 300 J |
| 34 | d | √(1000 × 250) = 500 K |
| 35 | a | nCvΔT = 2 × 20.75 × 10 = 415 J |
| 36 | c | γP = 1.4 × 2 × 10⁵ = 2.8 × 10⁵ Pa |
| 37 | d | (P₀/V)(9V² − V²)/2 = 4P₀V |
| 38 | c | ΔTv = γ × ΔTp = (5/3) × 10 = 16.7 K |
| 39 | a | W = 800 − 600 = 200 J; 200/800 = 25% |
| 40 | b | T₂/T₁ goes from 0.6 to 0.3; η = 70% |
| 41 | c | (1200/300)^(1/0.4) = 4^2.5 = 32 |
| 42 | d | 200/(300 − 200) = 2 |
| 43 | a | Adiabatic expansion cools the air |
| 44 | d | Q = W ≠ 0 in isothermal change; R is true |
| 45 | c | Free expansion is adiabatic and irreversible; η < 1 unless T₂ = 0 K |