Chapter 11 of 11 · 13 min read

Last-Week Revision Kit

Use this kit in the final seven days: read the glance sheet daily, say the rapid-fire facts aloud, tick the checklist honestly, and take Mock Test 2 under exam timing.

Book-at-a-glance sheet

Chapter 1: General trends

IdeaWhat to remember
Configurationns² np¹⁻⁶ (He 1s²)
Group oxidation stateGroup number − 10
Inert pair effectTl⁺, Pb²⁺, Bi³⁺ favoured; PbO₂, Tl³⁺, Bi(V) oxidise
First elementMax covalency 4, pπ–pπ bonds, no d orbitals
IE dipsN > O, P > S (half-filled p³)

Chapter 2: Group 13

IdeaWhat to remember
IE₁ orderB > Tl > Ga > Al > In
RadiusGa (135 pm) < Al (143 pm)
Lewis acidityBF₃ < BCl₃ < BBr₃ < BI₃ (back bonding)
Boric acidMonobasic Lewis acid; B sp²
Diborane4 terminal B–H, 2 B–H–B (3c–2e), B sp³
Al + NaOH2Al + 2NaOH + 6H₂O → 2Na[Al(OH)₄] + 3H₂

Chapter 3: Group 14

IdeaWhat to remember
Stable statesSn +4 (Sn²⁺ reduces), Pb +2 (PbO₂ oxidises)
AllotropesDiamond sp³ (154 pm), graphite sp² (141.5 pm, 340 pm layers), C₆₀ sp² (12 + 20 rings)
CatenationC ≫ Si > Ge ≈ Sn > Pb
OxidesCO neutral; CO₂, SiO₂ acidic; SnO₂, PbO₂ amphoteric
HalidesSiCl₄ hydrolyses, CCl₄ does not; [SiF₆]²⁻ exists

Chapter 4: Group 15

IdeaWhat to remember
Hydride trendsStability, basicity, angle fall NH₃ → BiH₃; reducing power rises
Hydride boiling pointsPH₃ < AsH₃ < NH₃ < SbH₃ < BiH₃
P oxoacidsBasicity = P–OH count; P–H means reducing
PCl₅TBP, sp³d; solid [PCl₄]⁺[PCl₆]⁻
White PP₄, 60°, reactive, under water

Chapter 5: Group 16

IdeaWhat to remember
Hydride acidityH₂O < H₂S < H₂Se < H₂Te
Hydride boiling pointsH₂S < H₂Se < H₂Te < H₂O
OzoneBent, about 117°, bond order 1.5, endothermic, oxidiser
S oxoacidsOleum S–O–S; peroxo acids O–O (S +6); dithionic S–S (S +5)
Contact processV₂O₅ catalyst, about 720 K, 2 bar

Chapter 6: Group 17

IdeaWhat to remember
Electron gain enthalpyCl > F > Br > I (most negative first)
Bond enthalpyCl₂ > Br₂ > F₂ > I₂
HXAcid HF < HCl < HBr < HI; bp HCl < HBr < HI < HF
Cl oxoacidsAcid strength HOCl < HClO₂ < HClO₃ < HClO₄; oxidising power reverse
InterhalogensClF₃ T-shape, BrF₅ square pyramid, IF₇ pentagonal bipyramid

Chapter 7: Group 18

IdeaWhat to remember
BartlettO₂⁺[PtF₆]⁻ led to Xe⁺[PtF₆]⁻ (similar IE of O₂ and Xe)
FluoridesXeF₂ linear (3 lp), XeF₄ square planar (2 lp), XeF₆ distorted octahedral (1 lp)
OxidesXeO₃ pyramidal, explosive; XeOF₄ square pyramidal
HydrolysisXeF₆ + 3H₂O → XeO₃ + 6HF
HeliumHighest IE₁, lowest boiling point (about 4.2 K)

40 rapid-fire facts

  1. p-block elements have the valence configuration ns² np¹⁻⁶.

  2. The highest (group) oxidation state equals the group number minus 10.

  3. The inert pair effect is strongest for the sixth-period elements Tl, Pb and Bi.

  4. Gallium is smaller than aluminium because 3d electrons shield poorly.

  5. B, C, N, O and F cannot exceed a covalency of 4.

  6. Boron is the only non-metal in Group 13.

  7. Gallium melts at about 303 K, just above room temperature.

  8. BF₃ is the weakest Lewis acid among the boron trihalides.

  9. Boric acid is a weak monobasic Lewis acid.

  10. Diborane has four terminal B–H bonds and two 3c–2e B–H–B bonds.

  11. Aluminium chloride dimerises to Al₂Cl₆ through two chlorine bridges.

  12. Graphite is the most stable allotrope of carbon and conducts electricity.

  13. C₆₀ has 12 five-membered and 20 six-membered rings.

  14. The C–C bond is 154 pm in diamond and 141.5 pm in graphite layers.

  15. CO is a neutral oxide and binds haemoglobin about 300 times more strongly than O₂.

  16. SiCl₄ is hydrolysed by water, while CCl₄ is not.

  17. [SiF₆]²⁻ exists, but [SiCl₆]²⁻ does not.

  18. SnO₂ and PbO₂ are amphoteric.

  19. The N≡N bond enthalpy is about 941 kJ/mol.

  20. The bond angle falls from 107.8° in NH₃ to 93.6° in PH₃.

  21. PH₃ has the lowest boiling point of the Group 15 hydrides.

  22. H₃PO₂ is monobasic, H₃PO₃ dibasic and H₃PO₄ tribasic.

  23. On heating, H₃PO₃ disproportionates into H₃PO₄ and PH₃.

  24. White phosphorus is made of P₄ tetrahedra with 60° bond angles and is stored under water.

  25. Solid PCl₅ exists as [PCl₄]⁺[PCl₆]⁻.

  26. Bi₂O₃ is basic.

  27. Oxygen has a less negative electron gain enthalpy than sulphur.

  28. The bond angle is 104.5° in H₂O and about 92° in H₂S.

  29. H₂Te is the strongest acid among the Group 16 hydrides.

  30. Rhombic sulphur is the stable form below 369 K.

  31. Ozone has two equal O–O bonds of 128 pm and a bond order of 1.5.

  32. Sulphur is +6 in H₂S₂O₇, H₂SO₅ and H₂S₂O₈.

  33. The contact process uses V₂O₅ at about 720 K and 2 bar.

  34. Chlorine has the most negative electron gain enthalpy of all elements.

  35. The F–F bond is weaker than the Cl–Cl and Br–Br bonds.

  36. HF is the weakest hydrohalic acid but has the highest boiling point of the hydrogen halides.

  37. HClO₄ is the strongest chlorine oxoacid; HOCl is the strongest oxidiser among them.

  38. IF₇ is pentagonal bipyramidal with sp³d³ iodine.

  39. XeF₄ is square planar, with two lone pairs on Xe.

  40. Helium has the highest first ionisation enthalpy of all elements.

Common mistakes checklist

  • I don't confuse the most electronegative element (F) with the most negative electron gain enthalpy (Cl).

  • I don't call PbO₂ a reducing agent or SnCl₂ an oxidising agent.

  • I can explain why BF₃ is the weakest Lewis acid of the boron halides.

  • I don't call boric acid tribasic; it is a monobasic Lewis acid.

  • I count only P–OH groups for basicity, not every H in the formula.

  • I remember the lowest-boiling hydride is the second member (PH₃, H₂S, HCl), not the first.

  • I count peroxo oxygens as −1 when finding the oxidation state of S.

  • I don't confuse acid strength with oxidising power in chlorine oxoacids.

  • I can draw XeF₂, XeF₄, XeF₆, ClF₃ and BrF₅ with the right number of lone pairs.

  • I don't confuse the most stable carbon allotrope (graphite) with the hardest (diamond).

Mock Test 2: New-pattern paper

Time: 35 minutes. 30 questions. +4 for a correct answer, −1 for a wrong one. Questions mix all seven chapters.

1. Which Group 13 element shows the most stable +1 oxidation state? (a) Ga (b) Al (c) Tl (d) In

2. Match List I (species) with List II (lone pairs on the central atom).

List I

  • A. XeF₂

  • B. ClF₃

  • C. NH₃

  • D. SiF₄

List II

  • i. 2

  • ii. 0

  • iii. 3

  • iv. 1

(a) A-iii, B-i, C-iv, D-ii (b) A-i, B-iii, C-iv, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-ii, B-i, C-iv, D-iii

3. Assertion (A): Graphite is a good conductor of electricity. Reason (R): Graphite is thermodynamically more stable than diamond. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

4. How many of the following statements are correct?

  • A. The two O–O bonds in ozone are equal in length.

  • B. H₂S₂O₈ contains an S–S bond.

  • C. XeO₃ has a trigonal pyramidal shape.

  • D. PH₃ is a weaker base than NH₃.

  • E. BI₃ is a weaker Lewis acid than BF₃.

(a) 2 (b) 4 (c) 5 (d) 3

5. Diborane burns as B₂H₆ + 3O₂ → B₂O₃ + 3H₂O. The volume of O₂ at STP (22.4 L/mol) needed to burn 0.10 mol of B₂H₆ is (a) 2.24 L (b) 6.72 L (c) 4.48 L (d) 3.36 L

6. A plot of first ionisation enthalpy against atomic number for B, C, N, O, F and Ne (801, 1086, 1402, 1314, 1681, 2081 kJ/mol) rises across the period. The only fall in the plot occurs between (a) N and O (b) C and N (c) O and F (d) F and Ne

Read this for Q7 and Q8. White phosphorus is warmed with concentrated NaOH solution in an inert atmosphere of CO₂. A gas with a fishy smell is given off: P₄ + 3NaOH + 3H₂O → PH₃ + 3NaH₂PO₂.

7. In this reaction, the oxidation state of phosphorus changes from 0 to (a) −3 only (b) +1 only (c) −3 and +1, so it is a disproportionation (d) +3 and +5

8. NaH₂PO₂ is a salt of H₃PO₂. This acid is (a) tribasic and oxidising (b) dibasic and reducing (c) monobasic and oxidising (d) monobasic and reducing

9. Statement I: Nitrogen forms NCl₅ by using its d orbitals. Statement II: Tl³⁺ is more stable than Tl⁺. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

10. Which hydride has the lowest boiling point? (a) H₂O (b) H₂Te (c) H₂S (d) H₂Se

11. Match List I (oxide) with List II (nature).

List I

  • A. Cl₂O₇

  • B. Bi₂O₃

  • C. Ga₂O₃

  • D. N₂O

List II

  • i. Acidic

  • ii. Neutral

  • iii. Amphoteric

  • iv. Basic

(a) A-i, B-iv, C-iii, D-ii (b) A-iv, B-i, C-iii, D-ii (c) A-i, B-iii, C-iv, D-ii (d) A-ii, B-iv, C-iii, D-i

12. Choose the correct set of statements.

  • A. Iodine in IF₇ is sp³d³ hybridised.

  • B. ClF₃ has two lone pairs on Cl.

  • C. BrF₅ is trigonal bipyramidal.

  • D. Interhalogens are more reactive than halogens, except F₂.

(a) A and C only (b) B and C only (c) A, C and D only (d) A, B and D only

13. The table gives pKa values of three hypohalous acids.

AcidHOClHOBrHOI
pKa7.58.610.6

Which conclusion is correct? (a) Acid strength falls as the electronegativity of the halogen falls (b) HOI is the strongest acid (c) Acid strength rises down the group (d) The three acids have equal strength

14. The number of P–O–P bridges in one P₄O₁₀ molecule is (a) 4 (b) 10 (c) 6 (d) 12

15. In which molecule is the central atom sp³d³ hybridised with no lone pair? (a) XeF₆ (b) IF₇ (c) BrF₅ (d) SF₆

16. Assertion (A): HF is the strongest of the hydrohalic acids. Reason (R): The H–F bond is the strongest of the H–X bonds. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

17. XeF₄ is hydrolysed: 6XeF₄ + 12H₂O → 4Xe + 2XeO₃ + 24HF + 3O₂. If 0.30 mol of XeF₄ reacts completely, the amount of XeO₃ formed is (a) 0.30 mol (b) 0.20 mol (c) 0.05 mol (d) 0.10 mol

18. Match List I (molecule) with List II (hybridisation of the central atom).

List I

  • A. BF₃

  • B. SiF₄

  • C. PCl₅

  • D. SF₆

List II

  • i. sp³d

  • ii. sp³d²

  • iii. sp²

  • iv. sp³

(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-iii, B-i, C-iv, D-ii (d) A-ii, B-iv, C-i, D-iii

19. Statement I: Rhombic sulphur changes to monoclinic sulphur above 369 K. Statement II: Monoclinic sulphur is made of S₆ rings. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Read this for Q20 and Q21. A water-treatment plant in Bengaluru disinfects drinking water with ozone instead of chlorine. The ozone is made on site by passing dry O₂ through a silent electric discharge and is used at once.

20. Why is ozone made on site and used at once? (a) Its formation from O₂ is endothermic, and O₃ slowly decomposes back to O₂ (b) O₃ is more stable than O₂ (c) O₃ is a reducing agent (d) O₃ is paramagnetic and breaks down in magnetic fields

21. If 9.6 g of O₂ is completely converted into O₃, the mass of O₃ formed is (a) 9.6 g (b) 6.4 g (c) 14.4 g (d) 4.8 g

22. Which order of thermal stability is correct? (a) H₂Te > H₂Se > H₂S > H₂O (b) HI > HBr > HCl > HF (c) NH₃ > PH₃ > AsH₃ > SbH₃ (d) BiH₃ > SbH₃ > AsH₃

23. How many of the following statements about Group 14 are correct?

  • A. CO₂ is a gas while SiO₂ is a solid.

  • B. SnCl₂ is a reducing agent.

  • C. Catenation is greater in Si than in C.

  • D. Diamond is a good conductor of electricity.

  • E. PbO₂ is amphoteric.

(a) 4 (b) 2 (c) 5 (d) 3

24. A bar chart of single-bond enthalpies shows the N–N bar lower than the P–P bar, although N is smaller. The best explanation is (a) N is larger than P (b) lone pair–lone pair repulsion between the small N atoms weakens N–N (c) N uses d orbitals in bonding (d) N–N is a multiple bond

25. In which oxoacid is sulphur in the +5 state? (a) H₂S₂O₇ (b) H₂SO₃ (c) H₂S₂O₆ (d) H₂S₂O₈

26. Which halogen oxidises Br⁻ and I⁻ but not F⁻ or Cl⁻? (a) F₂ (b) Cl₂ (c) Br₂ (d) I₂

27. The total number of lone pairs on Xe in XeF₂, XeF₄ and XeF₆ taken together is (a) 3 (b) 4 (c) 5 (d) 6

28. Assertion (A): H₂O has a much higher boiling point than H₂S. Reason (R): H₂O molecules are linked by hydrogen bonds. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

29. Statement I: Aluminium dissolves in aqueous NaOH, giving H₂. Statement II: Al₂O₃ is a purely basic oxide. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

30. Which species has the same shape as XeF₂? (a) SnCl₂ (b) [I₃]⁻ (c) H₂O (d) SO₂

Mock Test 2 answer key

QAnsReason
1cInert pair effect is greatest for Tl
2aXeF₂ 3, ClF₃ 2, NH₃ 1, SiF₄ 0
3bConductivity comes from delocalised π electrons, not stability
4dA, C, D true; H₂S₂O₈ has O–O, not S–S; BI₃ is the stronger Lewis acid
5b0.10 × 3 = 0.30 mol O₂ = 6.72 L
6aHalf-filled 2p³ of N gives the dip at O
7cP goes to −3 in PH₃ and +1 in NaH₂PO₂
8dOne P–OH (monobasic), two P–H (reducing)
9bN has no d orbitals; Tl⁺ is the more stable state
10cH₂S: no H-bonding and the smallest of the rest
11aCl₂O₇ acidic, Bi₂O₃ basic, Ga₂O₃ amphoteric, N₂O neutral
12dBrF₅ is square pyramidal
13aLower pKa = stronger acid; Cl is most electronegative
14cSix bridging O atoms along the edges of the P₄ tetrahedron
15bIF₇: 7 bond pairs, 0 lone pairs
16dHF is the weakest; strong H–F bond is the reason
17d6 : 2 ratio; 0.30 × 2 ÷ 6 = 0.10 mol
18bsp², sp³, sp³d, sp³d²
19cBoth forms contain S₈ rings
20aO₃ is endothermic and unstable relative to O₂
21aMass is conserved; only the molecules change
22cE–H bond weakens down Group 15
23dA, B, E true; C has more catenation; diamond is an insulator
24bSmall N atoms bring lone pairs close
25cDithionic acid: 2 + 2x − 12 = 0, x = +5
26bCl₂ sits above Br₂ and I₂ but below F₂
27d3 + 2 + 1 = 6
28aH-bonding raises the boiling point of water
29cAl₂O₃ is amphoteric
30b[I₃]⁻ is linear like XeF₂ (three lone pairs on the central I)
13 min left
‹
›