Chapter 6 of 11 · 22 min read

Chapter 4: Group 15: The Nitrogen Family

What you will learn

  • The configurations and physical trends of N, P, As, Sb and Bi.

  • How the hydrides EH₃ change in bond angle, stability, basicity and boiling point.

  • The oxidation states from −3 to +5 and the inert pair effect in Bi.

  • Why nitrogen is different from the rest of the group.

  • The structures, basicity and oxidation states of the oxoacids of nitrogen and phosphorus.

4.1 Members and configurations

Group 15 has nitrogen (N), phosphorus (P), arsenic (As), antimony (Sb) and bismuth (Bi). Each has five valence electrons, ns² np³. The np³ set is half-filled, which is extra stable.

PropertyNPAsSbBi
Atomic number715335183
Configuration[He] 2s² 2p³[Ne] 3s² 3p³[Ar] 3d¹⁰ 4s² 4p³[Kr] 4d¹⁰ 5s² 5p³[Xe] 4f¹⁴ 5d¹⁰ 6s² 6p³
Covalent radius (pm)70110121141148
First ionisation enthalpy (kJ/mol)14021012947834703
Electronegativity3.02.12.01.91.9
Naturenon-metal, gasnon-metal, solidmetalloidmetalloidmetal
  • Radius rises down the group. The increase from As to Bi is small because of the filled d and f subshells.

  • Ionisation enthalpy falls down the group. Group 15 values are higher than those of Group 16 in the same period, because a half-filled p³ set is hard to break. N (1402) is above O (1314 kJ/mol).

  • Electronegativity falls, sharply from N to P and then gently.

  • Metallic character rises: N and P non-metals, As and Sb metalloids, Bi a metal.

  • Physical state: only nitrogen is a gas (N₂). The rest are solids.

4.3 Hydrides EH₃

All five elements form hydrides of the type EH₃: NH₃ (ammonia), PH₃ (phosphine), AsH₃ (arsine), SbH₃ (stibine) and BiH₃ (bismuthine). Each has three bond pairs and one lone pair, so each is pyramidal.

PropertyNH₃PH₃AsH₃SbH₃BiH₃
H–E–H angle107.8°93.6°91.8°91.3°about 90°
E–H bond enthalpy (kJ/mol)389322297255lowest
Boiling point (K)238.5185.5210.6254.6about 290
Melting point (K)195.2139.5156.7185not well defined

From this table, four trends follow:

  1. Bond angle falls down the group. In NH₃, N is small and very electronegative. The bond pairs sit close to N and repel strongly, keeping the angle near the tetrahedral value. For P, As and Sb, the bond pairs sit farther out. They repel less, and the central atom uses almost pure p orbitals, so the angle approaches 90°.

  2. Thermal stability falls down the group, because the E–H bond gets weaker: NH₃ > PH₃ > AsH₃ > SbH₃ > BiH₃.

  3. Reducing power rises down the group, again because the E–H bond weakens. BiH₃ is the strongest reducing agent.

  4. Basicity falls down the group: NH₃ > PH₃ > AsH₃ > SbH₃ ≥ BiH₃. The lone pair on N is in a small orbital and is concentrated. On larger atoms it is spread out and less available.

Boiling point. From PH₃ to BiH₃ the boiling point rises with size, because van der Waals forces grow with molar mass. NH₃ breaks the pattern. It boils far higher than PH₃ because NH₃ molecules are linked by hydrogen bonds. The full order is BiH₃ > SbH₃ > NH₃ > AsH₃ > PH₃. The same hydrogen-bond jump appears for H₂O in Group 16 and HF in Group 17, but not for CH₄ in Group 14, which has no lone pair.

Figure 4.1 · Boiling points of p-block hydrides by period (°C)
Figure 4.1 · Boiling points of p-block hydrides by period (°C)

The Group 14 line rises smoothly from CH₄, but the Group 15, 16 and 17 lines start high at NH₃, H₂O and HF, dip at Period 3 and then climb again with size.

4.4 Oxidation states and other compounds

  • The common states are −3, +3 and +5. Down the group, −3 becomes less common (bismuth hardly forms any −3 compound), and +5 becomes less stable because of the inert pair effect. Bi(V) is a strong oxidising agent; Bi(III) is the stable state.

  • Nitrogen shows every state from −3 to +5: NH₃ (−3), N₂H₄ (−2), NH₂OH (−1), N₂ (0), N₂O (+1), NO (+2), N₂O₃ (+3), NO₂ (+4), N₂O₅ (+5).

  • In some states nitrogen oxoacids disproportionate. For example, 3HNO₂ → HNO₃ + 2NO + H₂O.

  • Halides: all form EX₃. Pentahalides EX₅ are formed by P, As and Sb, but not by N (no d orbitals). Bi forms only BiF₅ among pentahalides. Pentahalides are more covalent than trihalides, because a higher oxidation state polarises the halide more.

  • Oxides: E₂O₃ and E₂O₅. The +5 oxide is more acidic than the +3 oxide. Down the group, acidic character falls: N₂O₃ and P₄O₆ are acidic, As₂O₃ and Sb₂O₃ are amphoteric, Bi₂O₃ is basic.

Oxide of nitrogenOxidation state of NNature
N₂O+1neutral
NO+2neutral
N₂O₃+3acidic (anhydride of HNO₂)
NO₂ / N₂O₄+4acidic (mixed anhydride)
N₂O₅+5acidic (anhydride of HNO₃)

4.5 Anomalous behaviour of nitrogen

Nitrogen is small, highly electronegative, has a high ionisation enthalpy and no d orbitals. So:

  1. Strong pπ–pπ bonding. N forms N≡N (bond enthalpy about 941 kJ/mol), C≡N, N=O. N₂ is so stable that it is nearly inert at room temperature. That is why the air we breathe is 78% nitrogen without any harm.

  2. Weak N–N single bond. The lone pairs on two small, close N atoms repel each other. So the N–N single bond (about 159 kJ/mol) is weaker than the P–P single bond. Nitrogen therefore shows less catenation than phosphorus.

  3. Maximum covalency 4. N cannot form NCl₅ or NF₅. Its covalency stops at 4 (as in NH₄⁺).

  4. No dπ–pπ bonding of the kind P forms in R₃P=O.

  5. Hydrogen bonding. NH₃ is strongly hydrogen-bonded; PH₃ is not.

  6. Physical state. N₂ is a diatomic gas; phosphorus is a solid made of P₄ molecules or polymers.

Allotropes of phosphorus show how P avoids multiple bonds.

AllotropeStructureKey property
White Pdiscrete tetrahedral P₄ molecules, P–P–P angle 60°strained and very reactive; glows in the dark; catches fire in air, so stored under water
Red PP₄ tetrahedra joined into polymeric chainsmuch less reactive; does not glow; used on matchbox sides
Black Playered structure (α and β forms)least reactive, most stable

4.6 Oxoacids of nitrogen and phosphorus

The syllabus asks about trends and structures, so these are given as a compact reference.

Oxoacids of nitrogen.

AcidFormulaOxidation state of NKey point
Hyponitrous acidH₂N₂O₂+1weak
Nitrous acidHNO₂+3weak, unstable, disproportionates
Nitric acidHNO₃+5strong acid and strong oxidiser; planar, N is sp²

In HNO₃ the nitrogen is bonded to one OH and two O atoms, with resonance between the two N–O bonds. The molecule is planar.

Oxoacids of phosphorus. All phosphorus oxoacids have P in a tetrahedral environment with at least one P=O and one P–OH bond. Here is the one rule that answers most NEET questions:

Only H atoms in P–OH groups are acidic. H atoms bonded directly to P (P–H) are not acidic but make the acid a reducing agent.

AcidFormulaOxidation state of PP–OHP–HP=OSpecial bondBasicity
Hypophosphorous (phosphinic)H₃PO₂+1121none1
Orthophosphorous (phosphonic)H₃PO₃+3211none2
HypophosphoricH₄P₂O₆+4402P–P4
OrthophosphoricH₃PO₄+5301none3
PyrophosphoricH₄P₂O₇+5402P–O–P4
Metaphosphoric (cyclic trimer)(HPO₃)₃+5303three P–O–P3

Acids with P–H bonds (H₃PO₂, H₃PO₃) are good reducing agents. H₃PO₃ disproportionates on heating:

4H3PO3→Δ3H3PO4+PH3\mathrm{4H_3PO_3 \xrightarrow{\Delta} 3H_3PO_4 + PH_3}

Here P goes from +3 up to +5 and down to −3 at the same time.

Figure 4.2 · Structures of the oxoacids of phosphorus
Figure 4.2 · Structures of the oxoacids of phosphorus

Count only the blue OH groups to get basicity; the orange H atoms bonded straight to P are what make H₃PO₂ and H₃PO₃ reducing agents.

Worked example 4.1: Find the oxidation state of P and the basicity of H₃PO₃.

Solution: Let P = x. 3(+1) + x + 3(−2) = 0, so x = +3. Structurally, P has one P=O, one P–H and two P–OH. Only the two P–OH hydrogens ionise, so H₃PO₃ is dibasic. It forms two series of salts: NaH₂PO₃ and Na₂HPO₃.

Worked example 4.2: Why is the H–N–H angle in NH₃ (107.8°) much larger than the H–P–H angle in PH₃ (93.6°)?

Solution: N is small and very electronegative. It pulls the bond pairs close to itself, where they repel each other strongly and open up the angle. P is larger and less electronegative. Its bond pairs sit farther away and repel less. P also uses nearly pure 3p orbitals for bonding, whose natural angle is 90°.

Worked example 4.3: Arrange NH₃, PH₃ and SbH₃ in increasing boiling point and explain.

Solution: PH₃ (185.5 K) < NH₃ (238.5 K) < SbH₃ (254.6 K). PH₃ and SbH₃ have only van der Waals forces, which grow with size, so SbH₃ boils higher. NH₃ is lifted far above PH₃ by hydrogen bonding, but SbH₃ is so heavy that its van der Waals forces win.

Worked example 4.4: Why is N₂ almost unreactive at room temperature, while white phosphorus catches fire in air?

Solution: N₂ has a triple bond with a bond enthalpy of about 941 kJ/mol. Breaking it needs a lot of energy. White phosphorus has P₄ tetrahedra with 60° bond angles. The bonds are badly strained and weak, so P₄ reacts with oxygen easily.

Worked example 4.5: What volume of 0.5 M NaOH is needed to neutralise 8.2 g of H₃PO₃ completely? (H₃PO₃ = 82 g/mol)

Solution: Moles of H₃PO₃ = 8.2 / 82 = 0.1 mol. It is dibasic, so moles of NaOH = 2 × 0.1 = 0.2 mol. Volume = 0.2 / 0.5 = 0.4 L = 400 mL. A student who takes it as tribasic gets 600 mL, which is wrong.

Worked example 4.6: In 4H₃PO₃ → 3H₃PO₄ + PH₃, show that this is disproportionation.

Solution: P in H₃PO₃ is +3. P in H₃PO₄ is +5, so three P atoms are oxidised (each loses 2 electrons, total 6). P in PH₃ is −3, so one P atom is reduced (gains 6 electrons). The same element in the same state is both oxidised and reduced, and electrons balance (6 = 6).

Worked example 4.7: Count the P–OH, P=O, P–H and bridging bonds in pyrophosphoric acid, H₄P₂O₇. What is its basicity?

Solution: Two PO₄ tetrahedra share one O. Each P has one P=O and two P–OH, and both P atoms bond to the bridging O. So: P–OH = 4, P=O = 2, P–H = 0, and one P–O–P bridge. Basicity = number of P–OH = 4. Oxidation state of P: 4(+1) + 2x + 7(−2) = 0, so x = +5.

Worked example 4.8: Explain why NH₃ is a stronger base than PH₃ even though both have one lone pair.

Solution: In NH₃ the lone pair is on a small N atom and occupies a compact orbital with high electron density. It is easily donated to a proton. In PH₃ the lone pair is on a larger P atom, spread over a bigger volume and with more s character, so it is less available. Hence basicity NH₃ > PH₃.

Quick revision

  • Group 15: ns² np³, half-filled p set; IE of N > O.

  • EH₃ trends down: bond angle falls (107.8° → about 90°), stability falls, reducing power rises, basicity falls.

  • Boiling point: BiH₃ > SbH₃ > NH₃ > AsH₃ > PH₃ (NH₃ lifted by hydrogen bonding).

  • States: −3, +3, +5; Bi(III) stable, Bi(V) oxidising.

  • N: N≡N (941 kJ/mol), weak N–N single bond, covalency 4, no NCl₅.

  • White P: P₄, 60°, reactive; red P polymeric; black P most stable.

  • Basicity of P oxoacids = number of P–OH: H₃PO₂ 1, H₃PO₃ 2, H₃PO₄ 3, H₄P₂O₇ 4.

  • P–H bonds make H₃PO₂ and H₃PO₃ reducing agents.

NEET traps

  • Counting all H atoms of H₃PO₃ as acidic. Only the two P–OH hydrogens ionise.

  • Writing NH₃ as having the highest boiling point among Group 15 hydrides. SbH₃ and BiH₃ boil higher.

  • Thinking N forms stronger single bonds than P. The N–N single bond is weaker because of lone pair repulsion.

  • Giving the bond angle of P₄ as 109.5°. It is 60°.

  • Mixing H₄P₂O₆ (P–P bond, +4) with H₄P₂O₇ (P–O–P bond, +5).

  • Calling NO an acidic oxide. NO and N₂O are neutral.

Practice MCQs: Chapter 4

Level 1: Concept check

1. The basicity of H₃PO₃ is (a) 2 (b) 3 (c) 1 (d) 0

2. Which hydride is the most basic? (a) PH₃ (b) AsH₃ (c) NH₃ (d) BiH₃

3. The oxidation state of P in H₃PO₂ is (a) +3 (b) +1 (c) +5 (d) −1

4. The most reactive allotrope of phosphorus is (a) red (b) black (c) violet (d) white

5. The shape of the NH₃ molecule is (a) trigonal planar (b) tetrahedral (c) trigonal pyramidal (d) T-shaped

6. Which oxide of nitrogen is neutral? (a) NO (b) N₂O₃ (c) NO₂ (d) N₂O₅

7. Which Group 15 element is a true metal? (a) N (b) P (c) As (d) Bi

8. The P–P–P bond angle in a white phosphorus molecule is (a) 90° (b) 60° (c) 109.5° (d) 120°

9. Which oxoacid is a good reducing agent? (a) H₃PO₂ (b) H₃PO₄ (c) H₄P₂O₇ (d) HNO₃

10. Which acid contains a P–P bond? (a) H₄P₂O₇ (b) H₃PO₃ (c) H₄P₂O₆ (d) (HPO₃)₃

Level 2: NEET standard

11. The correct order of H–E–H bond angle is (a) PH₃ > NH₃ > AsH₃ > SbH₃ (b) NH₃ > PH₃ > AsH₃ > SbH₃ (c) SbH₃ > AsH₃ > PH₃ > NH₃ (d) NH₃ = PH₃ > AsH₃ > SbH₃

12. The correct order of boiling point is (a) NH₃ > PH₃ > AsH₃ > SbH₃ (b) PH₃ > AsH₃ > NH₃ > SbH₃ (c) SbH₃ > AsH₃ > PH₃ > NH₃ (d) SbH₃ > NH₃ > AsH₃ > PH₃

13. The correct order of thermal stability is (a) NH₃ > PH₃ > AsH₃ > SbH₃ > BiH₃ (b) BiH₃ > SbH₃ > AsH₃ > PH₃ > NH₃ (c) PH₃ > NH₃ > AsH₃ > SbH₃ > BiH₃ (d) all are equally stable

14. The number of P–OH bonds in pyrophosphoric acid is (a) 2 (b) 3 (c) 4 (d) 6

15. Nitrogen is almost inert at room temperature mainly because (a) N₂ is non-polar (b) the N≡N bond enthalpy is very high (c) N₂ has no lone pairs (d) nitrogen is too electronegative

16. The first ionisation enthalpy of N is higher than that of O because (a) N is larger than O (b) O has fewer protons (c) N is more electronegative (d) N has a stable half-filled 2p³ configuration

17. On heating, H₃PO₃ gives (a) H₃PO₄ and H₃PO₂ (b) P₄O₁₀ and H₂O (c) H₃PO₄ and PH₃ (d) H₃PO₂ and PH₃

18. Which pentahalide does NOT exist? (a) NCl₅ (b) PCl₅ (c) SbCl₅ (d) PF₅

19. The oxidation state and hybridisation of N in HNO₃ are (a) +3, sp³ (b) +5, sp² (c) +5, sp³ (d) +4, sp²

20. Which statement about phosphorus allotropes is correct? (a) Red P is more reactive than white P (b) White P is polymeric (c) Red P glows in the dark (d) White P is kept under water because it catches fire in air

21. The volume of 0.5 M NaOH needed to neutralise 8.2 g of H₃PO₃ (M = 82 g/mol) completely is (a) 200 mL (b) 600 mL (c) 400 mL (d) 100 mL

22. The correct order of basic strength is (a) NH₃ > PH₃ > AsH₃ > SbH₃ (b) SbH₃ > AsH₃ > PH₃ > NH₃ (c) PH₃ > NH₃ > AsH₃ > SbH₃ (d) all are equally basic

Level 3: Challenge

23. A phosphorus oxoacid has two P–H bonds and one P–OH bond. Its basicity and the oxidation state of P are (a) 1 and +3 (b) 2 and +1 (c) 3 and +5 (d) 1 and +1

24. The total moles of NaOH that react completely with 1 mol each of H₃PO₂, H₃PO₃ and H₃PO₄ together is (a) 9 (b) 6 (c) 3 (d) 7

25. The H–P–H angle in PH₃ is close to 90° because (a) P is sp³ hybridised with strong lone pair repulsion (b) PH₃ has no lone pair (c) P uses almost pure p orbitals for bonding (d) PH₃ molecules are hydrogen-bonded

26. Which statement about nitrogen is INCORRECT? (a) The N–N single bond is stronger than the P–P single bond (b) N forms pπ–pπ bonds with C and O (c) The maximum covalency of N is 4 (d) N cannot form dπ–pπ bonds

27. The sum of the oxidation states of P in H₃PO₂, H₃PO₃ and H₄P₂O₆ (per P atom) is (a) 9 (b) 8 (c) 7 (d) 10

28. Which hydride is the strongest reducing agent? (a) NH₃ (b) PH₃ (c) AsH₃ (d) BiH₃

29. Assertion (A): White phosphorus is more reactive than red phosphorus. Reason (R): Phosphorus is less electronegative than nitrogen. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Bismuth(V) compounds are strong oxidising agents. Statement II: Orthophosphoric acid is a tribasic acid. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1aTwo P–OH groups; the P–H hydrogen is not acidic.
2cLone pair on small N is most available.
3b3(+1) + x + 2(−2) = 0 gives x = +1.
4dStrained P₄ tetrahedra with 60° angles.
5cThree bond pairs and one lone pair.
6aNO (+2) is neutral; the others are acidic.
7dBi is metallic; As is a metalloid.
8bEach face of the P₄ tetrahedron is an equilateral triangle.
9aTwo P–H bonds make H₃PO₂ reducing.
10cHypophosphoric acid has a direct P–P bond.
11bAngle falls from 107.8° to about 91°.
12d254.6 > 238.5 > 210.6 > 185.5 K.
13aE–H bond weakens down the group.
14cTwo P atoms, each with two P–OH.
15bAbout 941 kJ/mol needed to break N≡N.
16dHalf-filled 2p³ is extra stable.
17c4H₃PO₃ → 3H₃PO₄ + PH₃.
18aN has no d orbitals; covalency limited to 4.
19bPlanar molecule with N in +5.
20dWhite P ignites in air, so it is stored under water.
21c0.1 mol × 2 = 0.2 mol; 0.2/0.5 = 0.4 L.
22aLone pair availability falls down the group.
23dThat is H₃PO₂: monobasic, P = +1.
24b1 + 2 + 3 = 6.
25cLittle hybridisation; p orbitals are at 90°.
26aN–N is weaker due to lone pair repulsion.
27b+1 + 3 + 4 = 8.
28dBi–H bond is the weakest.
29bReactivity comes from ring strain, not electronegativity.
30aInert pair effect makes Bi(V) oxidising; H₃PO₄ has three P–OH.

Chapter 4 revision sheet

One-page summary

  • Group 15: N, P, As, Sb, Bi (and Mc). Valence configuration ns² np³ (half-filled p, so ionisation enthalpy is higher than in Group 16 neighbours).

  • N and P are non-metals, As and Sb metalloids, Bi a metal.

  • Oxidation states −3 to +5. Stability of +5 falls down the group; Bi(III) is the stable state and Bi(V) is a strong oxidiser.

  • Nitrogen anomaly: N₂ with a triple bond (bond enthalpy about 941 kJ/mol), maximum covalency 4, no d orbitals, pπ–pπ bonds. The N–N single bond is weaker than P–P (lone pair repulsion), so N catenates poorly.

  • Hydrides EH₃: thermal stability, basicity and bond angle fall from NH₃ to BiH₃; reducing power rises.

  • Bond angles: NH₃ 107.8°, PH₃ 93.6°, AsH₃ 91.8°, SbH₃ 91.3°.

  • Boiling points: PH₃ < AsH₃ < NH₃ < SbH₃ < BiH₃ (NH₃ is high due to H-bonding).

  • Oxides: N₂O₃, P₄O₆ acidic; As₂O₃, Sb₂O₃ amphoteric; Bi₂O₃ basic.

  • N forms no pentahalides. PCl₅ (gas) is trigonal bipyramidal, sp³d; axial bonds longer than equatorial; solid PCl₅ is [PCl₄]⁺[PCl₆]⁻.

  • Phosphorus oxoacids: basicity = number of P–OH; P–H bonds make the acid reducing.

  • On heating, 4H₃PO₃ → 3H₃PO₄ + PH₃ (disproportionation: P goes +3 → +5 and −3).

  • White P: P₄ tetrahedra, P–P–P 60°, strained and very reactive, glows in air, stored under water. Red P is polymeric and less reactive; black P is the most stable.

  • Nitrogen oxoacids: HNO₃ (N +5, planar, strong acid) and HNO₂ (N +3).

Must-remember table

OxoacidFormulaOxidation state of PP–OHP–HBasicityReducing?
HypophosphorousH₃PO₂+1121Yes
PhosphorousH₃PO₃+3212Yes
HypophosphoricH₄P₂O₆+4404No
OrthophosphoricH₃PO₄+5303No
PyrophosphoricH₄P₂O₇+5404No
Cyclotrimetaphosphoric(HPO₃)₃+5303No

Memory aids

  • "Every P–H steals one H⁺": for H₃POₓ acids, basicity = 3 − (number of P–H bonds). H₃PO₄: 3, H₃PO₃: 2, H₃PO₂: 1.

  • Hydride boiling points, "Please Ask Nani Something Big": PH₃ < AsH₃ < NH₃ < SbH₃ < BiH₃.

  • "107, then all near 90": only NH₃ keeps a wide angle; heavier atoms bond with almost pure p orbitals.

  • White phosphorus "60-degree tension": a strained P₄ triangle-pyramid snaps open easily, so it is reactive and kept under water.

Concept connections

  • Shapes of NH₃, PCl₅, [PCl₄]⁺ and [PCl₆]⁻ use VSEPR from Chemistry Book 3: Chemical Bonding and Molecular Structure.

  • Disproportionation of H₃PO₃ and oxidation-state counting link to Chemistry Book 7: Redox Reactions and Electrochemistry.

  • The basicity of NH₃ (a lone pair donor) carries over to amines in Chemistry Book 18: Organic Compounds Containing Nitrogen.

Practice MCQs: Chapter 4, Level 4 (new NEET pattern)

31. Match List I (oxoacid) with List II (basicity).

List I

  • A. H₃PO₂

  • B. H₃PO₃

  • C. H₃PO₄

  • D. H₄P₂O₇

List II

  • i. 2

  • ii. 4

  • iii. 1

  • iv. 3

(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-ii, B-i, C-iv, D-iii (d) A-iii, B-i, C-iv, D-ii

32. Match List I (oxoacid) with List II (oxidation state of P).

List I

  • A. H₃PO₂

  • B. H₃PO₃

  • C. H₄P₂O₇

  • D. H₄P₂O₆

List II

  • i. +3

  • ii. +1

  • iii. +4

  • iv. +5

(a) A-i, B-ii, C-iv, D-iii (b) A-ii, B-i, C-iv, D-iii (c) A-ii, B-iii, C-iv, D-i (d) A-iv, B-i, C-ii, D-iii

33. Match List I (hydride) with List II (boiling point in K).

List I

  • A. NH₃

  • B. PH₃

  • C. AsH₃

  • D. SbH₃

List II

  • i. 254.6

  • ii. 185.5

  • iii. 238.5

  • iv. 210.6

(a) A-ii, B-iii, C-iv, D-i (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-ii, C-iv, D-i (d) A-i, B-ii, C-iv, D-iii

34. Match List I (species) with List II (shape).

List I

  • A. PCl₅ (gas)

  • B. [PCl₄]⁺

  • C. [PCl₆]⁻

  • D. NH₃

List II

  • i. Tetrahedral

  • ii. Octahedral

  • iii. Trigonal pyramidal

  • iv. Trigonal bipyramidal

(a) A-iv, B-i, C-ii, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-i, B-iv, C-ii, D-iii (d) A-iii, B-i, C-ii, D-iv

35. How many of the following statements are correct?

  • A. The bond dissociation enthalpy of N₂ is about 941 kJ/mol.

  • B. The N–N single bond is stronger than the P–P single bond.

  • C. Nitrogen cannot form NCl₅.

  • D. Basicity of the hydrides decreases from NH₃ to BiH₃.

  • E. Thermal stability of the hydrides increases from NH₃ to BiH₃.

(a) 3 (b) 2 (c) 4 (d) 5

36. Choose the correct set of statements about PCl₅.

  • A. In the gas phase it is trigonal bipyramidal.

  • B. All five P–Cl bonds have the same length.

  • C. Axial P–Cl bonds are longer than equatorial ones.

  • D. Solid PCl₅ exists as [PCl₄]⁺[PCl₆]⁻.

(a) A and B only (b) B, C and D only (c) A, C and D only (d) A and D only

37. Choose the correct set of statements about white phosphorus.

  • A. It is made of P₄ tetrahedra with a P–P–P angle of 60°.

  • B. It is less reactive than red phosphorus.

  • C. It glows in the dark because of slow oxidation in air.

  • D. It is stored under water.

(a) A and C only (b) A, C and D only (c) B, C and D only (d) A, B and D only

38. How many of the following oxoacids can act as reducing agents?

H₃PO₂, H₃PO₃, H₃PO₄, H₄P₂O₇, (HPO₃)₃

(a) 3 (b) 1 (c) 4 (d) 2

39. The H–E–H bond angles of four Group 15 hydrides are given.

HydrideNH₃PH₃AsH₃SbH₃
Bond angle107.8°93.6°91.8°91.3°

The sharp drop from NH₃ to PH₃ is best explained by (a) P being more electronegative than N (b) PH₃ having two lone pairs (c) the larger P bonding with nearly pure p orbitals, with bond pairs far apart and repelling less (d) hydrogen bonding in PH₃

40. A line graph of the thermal stability of EH₃ (y-axis) against the period of E (x-axis) falls steadily from NH₃ to BiH₃. Which conclusion follows? (a) NH₃ is the strongest reducing agent (b) BiH₃ is the strongest reducing agent (c) The E–H bond enthalpy increases down the group (d) PH₃ is more stable than NH₃

41. On heating, phosphorous acid disproportionates: 4H₃PO₃ → 3H₃PO₄ + PH₃. If 0.80 mol of H₃PO₃ reacts completely, the amount of PH₃ formed is (a) 0.80 mol (b) 0.60 mol (c) 0.40 mol (d) 0.20 mol

Read this for Q42 and Q43. In a school lab, a teacher burns a small piece of white phosphorus in excess dry air inside a bell jar. Dense white fumes settle as a powder. When the powder is dropped into water it hisses, and the solution turns blue litmus red.

42. If 0.50 mol of the white powder (P₄O₁₀) reacts fully with water, the amount of acid formed is (a) 2.0 mol (b) 1.0 mol (c) 3.0 mol (d) 0.50 mol

43. The acid in the solution is best described as (a) monobasic, with P in +3 (b) dibasic and reducing (c) tribasic, with P in +5, and not reducing (d) tetrabasic, with a P–O–P link

44. Which order is correct? (a) Bond angle: PH₃ > NH₃ (b) Boiling point: PH₃ < AsH₃ < NH₃ < SbH₃ (c) Basicity: PH₃ > NH₃ (d) Thermal stability: BiH₃ > SbH₃

45. Which statement about bismuth is correct? (a) Bi(V) is more stable than Bi(III) (b) BiH₃ is the most stable hydride of the group (c) Bi₂O₃ is an acidic oxide (d) Bi is the only true metal of the group, and its +5 compounds are strong oxidising agents

Level 4 answer key

QAnsReason
31dBasicity = number of P–OH: 1, 2, 3, 4
32b+1, +3, +5, +4
33cPH₃ lowest; NH₃ raised by H-bonding; SbH₃ highest of these
34asp³d TBP; sp³ tetrahedral; sp³d² octahedral; NH₃ pyramidal
35aA, C, D true; N–N is weaker than P–P; stability falls down
36cAxial and equatorial bonds differ in length
37bWhite P is more reactive than red P
38dOnly H₃PO₂ and H₃PO₃ have P–H bonds
39cNearly pure p bonding gives angles close to 90°
40bWeaker E–H bond releases H more easily, so reducing power rises
41d4 : 1 ratio; 0.80 ÷ 4 = 0.20 mol
42aP₄O₁₀ + 6H₂O → 4H₃PO₄; 0.50 × 4 = 2.0 mol
43cH₃PO₄: three P–OH, P +5, no P–H
44b185.5 < 210.6 < 238.5 < 254.6 K
45dInert pair effect makes Bi(V) oxidising; Bi₂O₃ is basic
22 min left
‹
›