Chapter 5 of 11 · 23 min read

Chapter 3: Group 14: The Carbon Family

What you will learn

  • The configurations and trends of C, Si, Ge, Sn and Pb.

  • How the +4 and +2 states change in stability down the group.

  • Why carbon catenates so well and why its chemistry is unique.

  • The structures and properties of diamond, graphite and fullerenes.

  • The nature of the oxides of Group 14 and the key compounds of carbon and silicon.

3.1 Members and configurations

Group 14 has carbon (C), silicon (Si), germanium (Ge), tin (Sn) and lead (Pb). Each has four valence electrons, ns² np².

PropertyCSiGeSnPb
Atomic number614325082
Configuration[He] 2s² 2p²[Ne] 3s² 3p²[Ar] 3d¹⁰ 4s² 4p²[Kr] 4d¹⁰ 5s² 5p²[Xe] 4f¹⁴ 5d¹⁰ 6s² 6p²
Covalent radius (pm)77118122140146
First ionisation enthalpy (kJ/mol)1086786761708715
Electronegativity2.51.81.81.81.9
Melting point (K)about 437316931218505600
Naturenon-metalmetalloidmetalloidmetalmetal
  • Radius rises down the group. The jump from Si to Ge is small (118 to 122 pm) because of the poorly shielding 3d¹⁰ electrons in Ge.

  • Ionisation enthalpy falls down the group, but Pb is slightly above Sn. The 4f¹⁴ and 5d¹⁰ electrons in Pb shield poorly.

  • Electronegativity stays almost the same from Si to Pb.

  • Melting point falls down the group. C and Si have giant covalent networks. Sn and Pb are soft metals with low melting points. Tin melts at 505 K, low enough for soldering wires in a ceiling fan.

  • Metallic character rises: C non-metal; Si and Ge metalloids (semiconductors); Sn and Pb metals.

3.3 Oxidation states and the inert pair

The group oxidation state is +4. The +2 state appears from Ge onward and becomes the more stable state for lead.

  • Carbon and silicon show +4 almost always (carbon also shows −4 in CH₄ and other states in organic compounds).

  • Ge shows +4 mainly; Ge(II) compounds are strong reducing agents.

  • Sn shows both; +4 is more stable, so Sn²⁺ is a reducing agent. SnCl₂ reduces HgCl₂ to Hg₂Cl₂ and then to Hg.

  • Pb shows both; +2 is more stable, so PbO₂ is a strong oxidising agent. PbCl₄ decomposes on warming and PbI₄ does not exist.

Compounds in the +4 state are mostly covalent. The tetrahalides SiX₄, GeX₄ and SnX₄ are covalent liquids or volatile solids.

Expansion of covalency. Si, Ge, Sn and Pb have empty d orbitals. They can accept lone pairs and reach covalency 6: [SiF₆]²⁻, [GeCl₆]²⁻, [Sn(OH)₆]²⁻. Carbon has no d orbitals, so it stops at 4.

[SiF₆]²⁻ exists but [SiCl₆]²⁻ does not. Six large Cl atoms cannot crowd around a small Si atom, and the lone pairs of Cl are held less firmly by silicon than those of F.

Hydrolysis of tetrachlorides. CCl₄ does not react with water. SiCl₄ fumes in moist air and is fully hydrolysed:

SiCl4+4H2O→Si(OH)4+4HCl\mathrm{SiCl_4 + 4H_2O \rightarrow Si(OH)_4 + 4HCl}

Silicon has empty 3d orbitals that can accept a lone pair from water. This gives an intermediate in which Si has five groups around it; it then loses HCl. Carbon has no d orbital to receive water's lone pair, and the small C is shielded by four Cl atoms. So CCl₄ is inert to water.

3.4 Oxides of Group 14

All the elements form a dioxide (EO₂) and a monoxide (EO). Acidic character falls down the group, and the lower oxides are less acidic than the higher ones.

ElementDioxideNatureMonoxideNature
CCO₂acidic, gasCOneutral
SiSiO₂acidic, solid networkSiO (unstable)not important
GeGeO₂acidicGeOdistinctly acidic
SnSnO₂amphotericSnOamphoteric
PbPbO₂amphoteric, strong oxidiserPbOamphoteric

Why CO₂ is a gas and SiO₂ is a hard solid. Carbon forms strong pπ–pπ double bonds with oxygen. One C atom needs only two O atoms, so O=C=O is a small linear molecule. The molecules attract each other weakly, and CO₂ is a gas. Silicon is too large for good pπ–pπ overlap with oxygen. So each Si forms four single Si–O bonds, each O bridges two Si atoms, and a giant three-dimensional network results. Sand and quartz are this network.

Carbon monoxide. CO has a triple bond, written :C≡O:, with one lone pair on carbon. Through that lone pair it binds metals, including the iron of haemoglobin. The carboxyhaemoglobin formed is about 300 times more stable than oxyhaemoglobin, so blood stops carrying oxygen. This is why a coal sigri burning in a closed room is dangerous.

Carbon dioxide. CO₂ is linear, with sp-hybridised carbon. It dissolves in water to form carbonic acid (H₂CO₃), a weak dibasic acid. Solid CO₂ is dry ice. Rising CO₂ in air adds to the greenhouse effect.

3.5 Catenation

Catenation is the linking of atoms of the same element into chains and rings. Carbon is the champion. Long chains, branches and rings of carbon give millions of organic compounds.

Catenation depends on the strength of the E–E bond:

BondC–CSi–SiGe–GeSn–Sn
Bond enthalpy (kJ/mol)348297260240
Catenation: C≫Si>Ge≈Sn, Pb shows practically none\text{Catenation: } \mathrm{C \gg Si > Ge \approx Sn}, \ \text{Pb shows practically none}

The small C atom forms short, strong bonds with itself. Larger atoms form longer, weaker bonds. Silicon chains are also easily attacked by oxygen, because the Si–O bond is much stronger than the Si–Si bond.

3.6 Anomalous behaviour of carbon

Carbon is small, more electronegative than the rest and has no d orbitals. So:

  1. Its maximum covalency is 4. It cannot form species like [CF₆]²⁻.

  2. It forms pπ–pπ multiple bonds with itself and with other small atoms: C=C, C≡C, C=O, C=S, C≡N. The heavier members do not do this to any real extent.

  3. It shows the strongest catenation.

  4. It is a non-metal, while the heavier members become metalloids and metals.

  5. Its dioxide is a gas; the others' dioxides are solids.

3.7 Allotropes of carbon

Carbon has crystalline allotropes (diamond, graphite, fullerenes) and many amorphous forms (coke, charcoal, carbon black). Graphene, a single layer of graphite, and carbon nanotubes are newer forms.

FeatureDiamondGraphiteFullerene (C₆₀)
Hybridisation of Csp³sp²sp²
Structurerigid 3D network of tetrahedraflat hexagonal layers stacked on each otherclosed cage, 20 six-membered and 12 five-membered rings
C–C distance154 pm141.5 pm within a layer; 340 pm between layerssingle and double bonds, 143.5 pm and 138.3 pm
Electrical conductioninsulatorconducts along the layerspoor (semiconducting)
Hardnesshardest natural substancesoft, slippery; used as lubricantsoft molecular solid
Stability (ΔfH, kJ/mol)+1.90 (standard state)+38.1
Usescutting tools, jewelleryelectrodes, pencils, lubricantresearch, materials

In graphite, each C uses three electrons in σ bonds within its layer. The fourth electron sits in an unhybridised p orbital. These p electrons form a delocalised π system over the whole layer, which is why graphite conducts electricity. The layers are held by weak van der Waals forces and slide over each other.

Fullerene C₆₀ is shaped like a cricket ball cut into panels, or more exactly a football. It is the only pure form of carbon, because it has no dangling bonds at edges. Diamond and graphite have surface atoms whose spare valencies are satisfied by H or O.

Figure 3.1 · Allotropes of carbon: diamond, graphite and C₆₀
Figure 3.1 · Allotropes of carbon: diamond, graphite and C₆₀

Diamond uses all four electrons in σ bonds; graphite and C₆₀ keep one electron per carbon in a p orbital, which is why graphite conducts.

3.8 Silicon compounds in brief

Compound typeBuilding unitNEET point
Silica (SiO₂)SiO₄ tetrahedra sharing all cornerseach Si bonded to 4 O; each O to 2 Si; quartz, sand
Silicates[SiO₄]⁴⁻ tetrahedrachains, sheets, rings formed by sharing corners; glass and cement are man-made silicates
Siliconesrepeat unit –R₂Si–O–made by hydrolysis of R₂SiCl₂ then condensation; water-repellent, heat-stable
Zeolitesaluminosilicates (some Si replaced by Al)molecular sieves; ZSM-5 converts alcohols directly into petrol

Worked example 3.1: Arrange C, Si, Ge and Sn in decreasing tendency to catenate and give the reason.

Solution: C > Si > Ge ≈ Sn. Catenation needs a strong E–E bond. Bond enthalpies fall from 348 kJ/mol (C–C) to 297 (Si–Si), 260 (Ge–Ge) and 240 (Sn–Sn) kJ/mol as the atoms grow larger.

Worked example 3.2: Why does SiCl₄ hydrolyse readily while CCl₄ does not?

Solution: Silicon has empty 3d orbitals. A water molecule donates a lone pair into one of them, forming a five-coordinate intermediate that then loses HCl. Repeating this four times gives Si(OH)₄. Carbon has no d orbitals and cannot take a fifth group, so water cannot attack CCl₄.

Worked example 3.3: CO₂ is a gas at room temperature, but SiO₂ melts above 1900 K. Explain.

Solution: C forms pπ–pπ double bonds with O, giving discrete O=C=O molecules held by weak forces. Si cannot form stable Si=O double bonds because its 3p orbitals overlap poorly with O's 2p. So Si uses four single bonds to four O atoms and builds a giant covalent network. Breaking that network needs a lot of energy.

Worked example 3.4: Explain why [SiF₆]²⁻ exists but [SiCl₆]²⁻ does not.

Solution: Six ligands must fit around the small Si atom. F is small, so six F atoms fit. Cl is much larger, so six Cl atoms would crowd each other. Also the lone pairs of Cl (in larger 3p orbitals) interact less strongly with silicon than those of F.

Worked example 3.5: In C₆₀, how many five-membered and six-membered rings are there? In a Kekulé structure, how many C=C double bonds are there?

Solution: C₆₀ has 12 pentagons and 20 hexagons. Each C forms three bonds, so the number of bonds = (60 × 3) / 2 = 90. Each C needs one double bond, and each double bond serves two carbons, so double bonds = 60 / 2 = 30. Single bonds = 90 − 30 = 60. Check with Euler's rule: vertices − edges + faces = 60 − 90 + 32 = 2.

Worked example 3.6: Graphite conducts electricity but diamond does not. Explain.

Solution: In diamond, every carbon is sp³ and uses all four valence electrons in σ bonds. No electron is free to move. In graphite, each carbon is sp² and uses three electrons in σ bonds. The fourth electron is in a p orbital and is delocalised over the whole layer, so it can carry current along the layer.

Worked example 3.7: The C–C distance in a graphite layer is 141.5 pm. A C–C single bond is 154 pm and a C=C double bond is 134 pm. Estimate the bond order in graphite and explain the bond length.

Solution: Each carbon forms three σ bonds and has one π electron shared among its three neighbours. Think of one double bond spread over three positions. Bond order = (3 + 1) / 3 = 4/3 ≈ 1.33. This lies between 1 and 2, so the bond length (141.5 pm) lies between 154 and 134 pm.

Worked example 3.8: Given ΔfH(diamond) = +1.9 kJ/mol, find the enthalpy change when 36 g of diamond turns into graphite.

Solution: 36 g of carbon = 36 / 12 = 3 mol. C(diamond) → C(graphite) has ΔH = 0 − 1.9 = −1.9 kJ/mol. For 3 mol, ΔH = 3 × (−1.9) = −5.7 kJ. The change is exothermic, so graphite is the more stable form, but the conversion is extremely slow at room temperature.

Quick revision

  • Group 14: ns² np²; group state +4, inert pair state +2 (stable for Pb).

  • SnCl₂ is a reducing agent; PbO₂ is an oxidising agent; PbI₄ does not exist.

  • Catenation C ≫ Si > Ge ≈ Sn; C–C bond enthalpy 348 kJ/mol.

  • SiCl₄ hydrolyses (3d orbitals); CCl₄ does not.

  • CO₂ is molecular and linear; SiO₂ is a network of SiO₄ tetrahedra.

  • CO is neutral; CO₂, SiO₂, GeO₂ acidic; SnO₂, PbO₂, SnO, PbO amphoteric.

  • Diamond sp³, insulator; graphite sp², conductor, 141.5 pm in layer, 340 pm between layers; C₆₀ has 12 pentagons and 20 hexagons.

  • Graphite is the most stable allotrope at room conditions.

NEET traps

  • Thinking diamond is the most stable allotrope because it is hardest. Graphite is more stable (ΔfH = 0).

  • Mixing up 141.5 pm (C–C within a graphite layer) with 340 pm (gap between layers).

  • Writing 20 pentagons and 12 hexagons for C₆₀. It is the other way: 12 pentagons, 20 hexagons.

  • Saying CO is acidic. It is neutral.

  • Calling SnCl₂ an oxidising agent. Tin wants to reach +4, so Sn²⁺ reduces.

  • Assuming SiO₂ has Si=O double bonds like CO₂. It has only single Si–O bonds.

Practice MCQs: Chapter 3

Level 1: Concept check

1. The hybridisation of carbon in diamond is (a) sp² (b) sp³ (c) sp (d) sp³d

2. Which allotrope of carbon is a good conductor of electricity? (a) diamond (b) fullerene C₆₀ (c) graphite (d) none of these

3. Which element shows the greatest tendency to catenate? (a) Si (b) Ge (c) Sn (d) C

4. Which oxide is neutral? (a) CO (b) CO₂ (c) SiO₂ (d) SnO₂

5. The more stable oxidation state of lead is (a) +4 (b) −4 (c) +2 (d) +1

6. The number of five-membered rings in C₆₀ is (a) 20 (b) 12 (c) 30 (d) 60

7. The number of valence electrons in a Group 14 atom is (a) 2 (b) 3 (c) 6 (d) 4

8. The thermodynamically most stable allotrope of carbon at 298 K and 1 bar is (a) graphite (b) diamond (c) fullerene (d) carbon black

9. Which Group 14 element is a metalloid? (a) C (b) Pb (c) Ge (d) Sn

10. Solid SiO₂ consists of (a) linear O=Si=O molecules (b) a 3D network of SiO₄ tetrahedra (c) flat hexagonal layers (d) diatomic SiO units

Level 2: NEET standard

11. The correct order of catenation tendency is (a) C > Si > Ge ≈ Sn (b) Si > C > Ge > Sn (c) Sn > Ge > Si > C (d) C > Sn > Ge > Si

12. SiCl₄ is hydrolysed by water but CCl₄ is not because (a) C is more electropositive than Si (b) the C–Cl bond is ionic (c) CCl₄ is a gas (d) Si has vacant 3d orbitals to accept a lone pair from water

13. CO₂ is a gas while SiO₂ is a high-melting solid because (a) SiO₂ is ionic (b) CO₂ has hydrogen bonds (c) C forms pπ–pπ double bonds with O but Si does not (d) Si is more electronegative than C

14. Which species does NOT exist? (a) [SiF₆]²⁻ (b) [SiCl₆]²⁻ (c) [GeCl₆]²⁻ (d) [Sn(OH)₆]²⁻

15. The C–C bond length within a graphite layer is about (a) 154 pm (b) 340 pm (c) 120 pm (d) 141.5 pm

16. Which pair contains only amphoteric oxides? (a) CO₂, SiO₂ (b) SnO₂, PbO₂ (c) CO, CO₂ (d) SiO₂, GeO₂

17. Graphite is used as a dry lubricant because (a) its layers are held by weak van der Waals forces (b) it has sp³ carbon (c) it is a metal (d) it reacts with oil

18. Carbon monoxide is poisonous because it (a) is an acidic oxide (b) oxidises blood (c) binds haemoglobin far more strongly than oxygen does (d) forms carbonic acid in blood

19. Each carbon atom in C₆₀ is (a) sp² (b) sp³ (c) sp (d) sp³d

20. The correct order of first ionisation enthalpy is (a) C > Si > Ge > Sn > Pb (b) C > Ge > Si > Sn > Pb (c) Si > C > Ge > Pb > Sn (d) C > Si > Ge > Pb > Sn

21. The repeating unit of a silicone is (a) –SiO₄– (b) –R₃Si– (c) –R₂Si–O– (d) –SiH₂–

22. Which chloride reduces HgCl₂ to Hg₂Cl₂? (a) PbCl₂ (b) SnCl₂ (c) CCl₄ (d) SiCl₄

Level 3: Challenge

23. In a Kekulé structure of C₆₀, the ratio of C=C double bonds to C–C single bonds is (a) 1 : 1 (b) 1 : 3 (c) 1 : 2 (d) 2 : 1

24. The C–C bond order within a graphite layer is closest to (a) 1 (b) 1.5 (c) 2 (d) 1.33

25. ΔfH of diamond is +1.9 kJ/mol. The enthalpy change when 24 g of diamond changes into graphite is (a) −3.8 kJ (b) +3.8 kJ (c) −1.9 kJ (d) +1.9 kJ

26. PbI₄ does not exist because (a) Pb is too small to hold four iodine atoms (b) Pb⁴⁺ oxidises I⁻ to I₂ and becomes Pb²⁺ (c) Pb has no d orbitals (d) iodine is more electronegative than chlorine

27. Which statement is INCORRECT? (a) GeO₂ is acidic (b) SnO is amphoteric (c) CO₂ is acidic (d) PbO₂ is purely basic

28. In silica (SiO₂), each Si is bonded to x oxygen atoms and each O is bonded to y silicon atoms. The values of x and y are (a) 2 and 1 (b) 4 and 2 (c) 4 and 1 (d) 2 and 2

29. Assertion (A): Diamond is a bad conductor of electricity. Reason (R): In diamond all four valence electrons of each carbon are used in σ bonds. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Silicon tetrachloride is hydrolysed by water. Statement II: The CO₂ molecule is bent like H₂O. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bFour σ bonds in a tetrahedral network.
2cDelocalised π electrons move along the layers.
3dC–C bond is the strongest E–E bond in the group.
4aCO reacts with neither acids nor bases.
5cInert pair effect stabilises Pb²⁺.
6b12 pentagons and 20 hexagons.
7dns² np² = 4 electrons.
8aGraphite is the standard state (ΔfH = 0).
9cGe is a semiconductor metalloid.
10bEach Si bonded to four O in a giant network.
11aFollows E–E bond enthalpies 348 > 297 > 260 ≈ 240.
12dSi accepts water's lone pair in 3d; C cannot.
13cSmall C overlaps well with O 2p; Si does not.
14bSix large Cl cannot fit around small Si.
15d141.5 pm in layer; 340 pm is the interlayer gap.
16bSnO₂ and PbO₂ react with acids and bases.
17aLayers slide over each other easily.
18cCarboxyhaemoglobin is about 300 times more stable.
19aThree σ bonds per carbon in the cage.
20d1086 > 786 > 761 > 715 (Pb) > 708 (Sn).
21cSilicones are –(R₂SiO)– chains.
22bSn²⁺ is oxidised to the more stable Sn⁴⁺.
23c30 double and 60 single bonds.
24d(3 + 1)/3 = 4/3.
25a2 mol × (−1.9) = −3.8 kJ.
26bInert pair effect makes Pb⁴⁺ oxidising.
27dPbO₂ is amphoteric, not purely basic.
28bSiO₄ tetrahedra share every corner.
29aNo free electrons, so no conduction.
30cSiCl₄ hydrolyses; CO₂ is linear.

Chapter 3 revision sheet

One-page summary

  • Group 14: C, Si, Ge, Sn, Pb (and Fl). Valence configuration ns² np².

  • C and Si are non-metals, Ge is a metalloid, Sn and Pb are metals.

  • Oxidation states +4 and +2. The +2 state gets more stable down the group (inert pair effect).

  • Sn(II) compounds are reducing (they go to Sn(IV)); Pb(IV) compounds such as PbO₂ are oxidising (they go to Pb(II)).

  • C cannot exceed covalency 4. Si, Ge, Sn, Pb expand to 6: [SiF₆]²⁻, [GeCl₆]²⁻, [Sn(OH)₆]²⁻. [SiCl₆]²⁻ does not exist (six large Cl do not fit, and Cl lone pairs interact weakly with Si).

  • CCl₄ is not hydrolysed (no d orbitals on C); SiCl₄ + 4H₂O → Si(OH)₄ + 4HCl.

  • CO₂ is a gas of discrete linear O=C=O molecules (pπ–pπ); SiO₂ is a network solid of SiO₄ tetrahedra (Si–O single bonds).

  • Dioxides: CO₂, SiO₂, GeO₂ acidic; SnO₂, PbO₂ amphoteric. Monoxides: CO neutral, GeO acidic, SnO and PbO amphoteric.

  • CO has a triple bond (one σ, two π) and a lone pair on C; it is a ligand and binds haemoglobin about 300 times more strongly than O₂.

  • Catenation: C ≫ Si > Ge ≈ Sn; Pb hardly any. E–E bond enthalpies (kJ/mol): C–C 348, Si–Si 297, Ge–Ge 260, Sn–Sn 240.

  • Diamond: sp³, 3D network, C–C 154 pm, hardest natural solid, insulator.

  • Graphite: sp², hexagonal layers 340 pm apart, C–C 141.5 pm, conducts along layers, soft and slippery; the most stable form of carbon.

  • Fullerene C₆₀: sp², 20 six-membered and 12 five-membered rings, molecular, soluble in organic solvents.

  • Silicates are built from SiO₄⁴⁻ tetrahedra that share corners.

Must-remember table

SpeciesHybridisationStructureKey fact
Diamondsp³3D networkC–C 154 pm; insulator
Graphitesp²Layers, 340 pm apartC–C 141.5 pm; conductor
C₆₀sp²Closed cage, 20 hexagons + 12 pentagonsMolecular, soluble
CO₂spLinearAcidic gas
COspC≡ONeutral oxide, ligand
SiO₂sp³ (Si)Network of SiO₄ tetrahedraHigh-melting acidic solid
SiCl₄sp³TetrahedralHydrolysed by water
[SiF₆]²⁻sp³d²OctahedralSi expands its octet

Memory aids

  • "sp³ is 3D, sp² is 2D": diamond (sp³) is a 3D network, graphite (sp²) is 2D sheets.

  • C₆₀ "football 20-12": 20 hexagons and 12 pentagons, like the panels of a classic football.

  • "Tin Tries to rise, Lead Loves to lie low": Sn(II) rises to Sn(IV) (reducing); Pb(IV) falls to Pb(II) (oxidising).

  • Catenation "348 → 240, chains get shorter": falling E–E bond enthalpy means weaker chains down the group.

Concept connections

  • Hybridisation in diamond, graphite and CO₂ is from Chemistry Book 3: Chemical Bonding and Molecular Structure.

  • Catenation is why carbon has a whole branch of chemistry: see Chemistry Book 15: Hydrocarbons.

  • CO as a ligand in metal carbonyls appears in Chemistry Book 12: Coordination Compounds.

Practice MCQs: Chapter 3, Level 4 (new NEET pattern)

31. Match List I (species) with List II (feature).

List I

  • A. Diamond

  • B. Graphite

  • C. C₆₀

  • D. CO₂

List II

  • i. 12 pentagons and 20 hexagons

  • ii. Linear, sp carbon

  • iii. sp³ carbon, 3D network

  • iv. sp² carbon, layers 340 pm apart

(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-i, C-iv, D-ii (d) A-ii, B-iv, C-i, D-iii

32. Match List I (compound) with List II (behaviour).

List I

  • A. SnCl₂

  • B. PbO₂

  • C. SiCl₄

  • D. CO

List II

  • i. Hydrolysed by water, giving HCl

  • ii. Donates the lone pair on C to metals

  • iii. Oxidising agent

  • iv. Reducing agent

(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-ii, D-i (c) A-i, B-iii, C-iv, D-ii (d) A-iv, B-iii, C-i, D-ii

33. Match List I (element) with List II (description).

List I

  • A. C

  • B. Ge

  • C. Sn

  • D. Pb

List II

  • i. Metal whose +2 state is the more stable

  • ii. Non-metal with the greatest catenation

  • iii. Metalloid

  • iv. Metal whose +4 state is more stable than +2

(a) A-iii, B-ii, C-iv, D-i (b) A-ii, B-iii, C-iv, D-i (c) A-ii, B-iii, C-i, D-iv (d) A-ii, B-iv, C-iii, D-i

34. Match List I (bond) with List II (bond enthalpy in kJ/mol).

List I

  • A. C–C

  • B. Si–Si

  • C. Ge–Ge

  • D. Sn–Sn

List II

  • i. 260

  • ii. 348

  • iii. 240

  • iv. 297

(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-i, C-iv, D-iii (c) A-ii, B-iv, C-i, D-iii (d) A-iii, B-iv, C-i, D-ii

35. How many of the following statements are correct?

  • A. Graphite conducts electricity along its layers.

  • B. Diamond is the thermodynamically most stable allotrope of carbon.

  • C. C₆₀ has 12 five-membered and 20 six-membered rings.

  • D. In graphite each carbon uses sp³ hybrid orbitals.

  • E. The C–C bond in diamond is longer than the in-layer C–C bond in graphite.

(a) 2 (b) 4 (c) 3 (d) 5

36. Choose the correct set of statements.

  • A. CCl₄ is not hydrolysed by water under normal conditions.

  • B. [SiCl₆]²⁻ is a stable ion.

  • C. [SiF₆]²⁻ exists, and Si in it is sp³d² hybridised.

  • D. Hydrolysis of SiCl₄ gives Si(OH)₄ and HCl.

(a) A, C and D only (b) A and B only (c) B, C and D only (d) A, B, C and D

37. Choose the correct set of statements.

  • A. CO₂ is a gas because carbon forms pπ–pπ double bonds with oxygen, giving discrete molecules.

  • B. In SiO₂ each Si is bonded tetrahedrally to four O atoms.

  • C. CO binds haemoglobin more strongly than O₂ does.

  • D. CO is an acidic oxide.

(a) A and D only (b) B, C and D only (c) A and C only (d) A, B and C only

38. How many of the following oxides are amphoteric?

CO, CO₂, SiO₂, SnO₂, PbO₂, SnO, PbO, GeO₂

(a) 3 (b) 4 (c) 5 (d) 2

39. Data on three allotropes of carbon are given.

AllotropeDensity (g/cm³)Conducts electricity?Other observation
P3.51NoHardest natural solid
Q2.26YesSoft, slippery, layered
Rabout 1.7NoDissolves in toluene to give a coloured solution

Which statement is correct? (a) P is graphite and R is diamond (b) P has sp³ carbon, Q has sp² carbon, and R is a molecular allotrope (c) Q has no delocalised electrons (d) R is a covalent network solid

40. A graph of the relative stability of the +2 oxidation state (y-axis) against the element (C, Si, Ge, Sn, Pb on the x-axis) rises steadily from C to Pb. Which fact fits this graph? (a) PbCl₄ is more stable than PbCl₂ (b) SnCl₂ is an oxidising agent (c) GeCl₂ is more stable than PbCl₂ (d) PbO₂ is a strong oxidising agent

41. 0.25 mol of SiCl₄ is hydrolysed completely by water. The amount of HCl formed is (a) 1.0 mol (b) 0.25 mol (c) 0.50 mol (d) 2.0 mol

Read this for Q42 and Q43. In winter, a mechanic in Shimla runs a car engine inside a closed garage to warm it up. After some time he feels dizzy and has a headache. A gas detector shows a high level of a colourless, odourless gas from incomplete burning of petrol.

42. Why is this gas dangerous? (a) It is an acidic oxide that forms carbonic acid in blood (b) It oxidises Fe²⁺ in haemoglobin to Fe³⁺ (c) It forms carboxyhaemoglobin, binding about 300 times more strongly than O₂ (d) It is a greenhouse gas that warms the blood

43. The bonding in this gas molecule is (a) one σ and two π bonds, with a lone pair on C that binds metals (b) one σ and one π bond (c) two σ bonds (d) a single bond with three lone pairs on O

44. The correct order of the tendency for catenation is (a) Si > C > Ge > Sn (b) C > Si > Pb > Ge (c) Pb > Sn > Ge > Si > C (d) C > Si > Ge ≈ Sn > Pb

45. The hybridisation of carbon in diamond, graphite, C₆₀ and CO₂, respectively, is (a) sp³, sp², sp³, sp (b) sp³, sp, sp², sp² (c) sp³, sp², sp², sp (d) sp², sp³, sp², sp

Level 4 answer key

QAnsReason
31aDiamond sp³; graphite layers; C₆₀ 12 + 20 rings; CO₂ linear
32dSn²⁺ reduces, PbO₂ oxidises, SiCl₄ hydrolyses, CO is a ligand
33bC non-metal, Ge metalloid, Sn prefers +4, Pb prefers +2
34c348, 297, 260, 240 kJ/mol down the group
35cA, C, E true; graphite is most stable; graphite is sp²
36a[SiCl₆]²⁻ does not exist
37dCO is neutral, not acidic
38bSnO₂, PbO₂, SnO, PbO
39bP diamond, Q graphite, R fullerene (molecular)
40dStable Pb(II) makes Pb(IV) in PbO₂ an oxidiser
41aSiCl₄ + 4H₂O → Si(OH)₄ + 4HCl; 0.25 × 4 = 1.0 mol
42cCO forms carboxyhaemoglobin and blocks O₂ transport
43aC≡O has one σ and two π bonds; C lone pair donates to metals
44dFalling E–E bond strength down the group
45cDiamond sp³, graphite sp², C₆₀ sp², CO₂ sp
23 min left
‹
›