Chapter 1: Introduction to the p-Block
What you will learn
Where the p-block sits in the periodic table and how to write its configurations.
How radius, ionisation enthalpy, electronegativity and metallic character change down a group and across a period.
Why heavier elements prefer an oxidation state two units below the group maximum (the inert pair effect).
Why the first member of each group (B, C, N, O, F) behaves differently from the rest.
How to use these trends to predict oxidising and reducing power, acidity of oxides and the existence of compounds.
1.1 Where the p-block sits
The p-block is the block of six columns on the right side of the periodic table: Groups 13 to 18. In these elements the last electron enters a p subshell. A p subshell holds at most six electrons, so there are six groups.
The general valence shell configuration is:
Helium is the one exception. It sits in Group 18 because it is a noble gas, but its configuration is 1s² with no p electrons.
| Group | Valence configuration | Elements | Group oxidation state | Other common states |
|---|---|---|---|---|
| 13 | ns² np¹ | B, Al, Ga, In, Tl | +3 | +1 (Tl, In) |
| 14 | ns² np² | C, Si, Ge, Sn, Pb | +4 | +2 (Sn, Pb, Ge), −4 (C) |
| 15 | ns² np³ | N, P, As, Sb, Bi | +5 | +3, −3 |
| 16 | ns² np⁴ | O, S, Se, Te, Po | +6 | −2, +2, +4 |
| 17 | ns² np⁵ | F, Cl, Br, I, At | +7 | −1, +1, +3, +5 |
| 18 | ns² np⁶ | He, Ne, Ar, Kr, Xe, Rn | +8 | +2, +4, +6 (Xe) |
A quick rule for the group oxidation state:
The p-block is the only block that holds metals, metalloids and non-metals together. Think of it as a mixed colony: the top right corner is pure non-metal (F, O, N, Cl), the bottom left is metal (Al, Tl, Sn, Pb, Bi), and a diagonal band of metalloids (B, Si, Ge, As, Sb, Te) runs between them.
1.2 What lies under the valence shell
The core below the valence shell is not the same for every period. This explains many "odd" values in the data tables.
| Period | Example elements | Inner subshells just below ns np |
|---|---|---|
| 2 | B, C, N, O, F, Ne | only 1s² |
| 3 | Al, Si, P, S, Cl, Ar | 2s² 2p⁶ (noble gas core) |
| 4 | Ga, Ge, As, Se, Br, Kr | 3d¹⁰ added |
| 5 | In, Sn, Sb, Te, I, Xe | 4d¹⁰ added |
| 6 | Tl, Pb, Bi, Po, At, Rn | 4f¹⁴ and 5d¹⁰ added |
For example, thallium (Z = 81) is [Xe] 4f¹⁴ 5d¹⁰ 6s² 6p¹, and lead (Z = 82) is [Xe] 4f¹⁴ 5d¹⁰ 6s² 6p².
d and f electrons are poor at shielding. Their orbitals are diffuse and do not sit between the nucleus and the outer electrons very well. So when ten 3d electrons are added between Al and Ga, the nuclear charge rises by 18 units but the extra shielding does not keep pace. The outer electrons of Ga feel a higher effective nuclear charge than expected. The same thing happens, more strongly, after the 4f¹⁴ set in Period 6 (the lanthanoid contraction).
1.3 Trends down a group
As we go down a group, a new shell is added each time. The usual trends follow, with a few kinks caused by the d and f cores.
| Property | Down a group | Main reason | Known exceptions |
|---|---|---|---|
| Atomic radius | increases | new shell added | Ga (135 pm) is smaller than Al (143 pm) |
| First ionisation enthalpy | decreases | outer electron farther away | Group 13: Ga slightly above Al; Tl above In |
| Electronegativity | decreases | larger atom holds bonding pair less tightly | Group 13 values from Al to Tl are irregular |
| Metallic character | increases | lower ionisation enthalpy | none in the main pattern |
| Stability of the lower oxidation state | increases | inert pair effect | none |
Metallic character changes sharply down each group:
| Group | Non-metals | Metalloids | Metals |
|---|---|---|---|
| 13 | none | B | Al, Ga, In, Tl |
| 14 | C | Si, Ge | Sn, Pb |
| 15 | N, P | As, Sb | Bi |
| 16 | O, S | Se, Te | Po |
| 17 | F, Cl, Br, I | (At, radioactive) | none |
| 18 | all are gases | none | none |
1.4 Trends across a period
Across a period from Group 13 to Group 17, the nuclear charge rises and electrons enter the same shell. So the atom shrinks, ionisation enthalpy and electronegativity rise, and metallic character falls. Group 18 elements have the highest ionisation enthalpies of their periods because their shells are full.
The nature of the oxides follows. Take Period 3 as the example:
| Oxide (highest state) | Al₂O₃ | SiO₂ | P₄O₁₀ | SO₃ | Cl₂O₇ |
|---|---|---|---|---|---|
| Nature | amphoteric | weakly acidic | acidic | strongly acidic | very strongly acidic |
Within one element, the oxide in the higher oxidation state is more acidic. N₂O₅ is more acidic than N₂O₃, and SO₃ is more acidic than SO₂.
1.5 Oxidation states and the inert pair effect
The valence shell has ns² npˣ electrons. If all of them are used in bonding, the element shows the group oxidation state. If only the p electrons are used and the ns² pair stays out, the element shows a state two units lower:
In the lighter elements both states appear, but the higher one is usually more stable. In the heavier elements (Period 6 mainly, and partly Period 5) the lower state becomes the more stable one. The ns² pair seems to sit "inert". This is the inert pair effect.
Why does it happen? Two reasons work together.
The 6s electrons are held tightly because the 4f¹⁴ and 5d¹⁰ electrons shield them poorly. Removing them costs a lot of energy.
Large atoms form weak bonds. The energy released by forming two extra bonds is not enough to pay for unpairing and using the ns² pair.
You can see the effect as a set of stability orders:
| Group | Stability of lower state rises | Stability of higher state falls | What it means in practice |
|---|---|---|---|
| 13 | Ga⁺ < In⁺ < Tl⁺ | Ga³⁺ > In³⁺ > Tl³⁺ | Tl³⁺ is an oxidising agent; Tl⁺ salts are stable |
| 14 | Ge²⁺ < Sn²⁺ < Pb²⁺ | Ge⁴⁺ > Sn⁴⁺ > Pb⁴⁺ | SnCl₂ is a reducing agent; PbO₂ is a strong oxidising agent |
| 15 | As³⁺ < Sb³⁺ < Bi³⁺ | As(V) > Sb(V) > Bi(V) | Bi(V) compounds (e.g. NaBiO₃) are strong oxidisers |
| 16 | +4 grows more stable down | +6 less stable down | SO₂ reduces, but TeO₂ and PoO₂ are the stable oxides of Te and Po |
A simple way to remember the direction: a species that wants to go down to the stable lower state is an oxidising agent (Pb⁴⁺ → Pb²⁺). A species in a lower state that is not yet stable there wants to go up, so it is a reducing agent (Sn²⁺ → Sn⁴⁺, because Sn⁴⁺ is still more stable for tin).

Read each row from left to right: the last member of Groups 13, 14 and 15 (Tl, Pb, Bi) and the heavier members of Group 16 prefer the state two below the group maximum.
1.6 The first member of each group is different
B, C, N, O and F differ from the rest of their groups. Think of the first child in a family who is very different from the siblings. Four features cause it:
Small size. The atom is much smaller than the next member.
High electronegativity and ionisation enthalpy. They hold electrons tightly.
No d orbitals in the valence shell. Period 2 has only 2s and 2p. So the maximum covalency is 4 (four orbitals: one s and three p).
Strong pπ–pπ bonding. Small atoms come close enough for their p orbitals to overlap sideways, giving stable double and triple bonds with themselves and with other small atoms (C=C, C≡C, N≡N, O=O, C=O, C≡N).
The heavier members can use d orbitals. They can expand the octet (PCl₅, SF₆, IF₇) and they form dπ–pπ bonds (the extra bonding in P=O and S=O). They rarely form pπ–pπ bonds with themselves, so they prefer single-bonded chains and rings (P₄, S₈).
| Feature | First member | Heavier members |
|---|---|---|
| Maximum covalency | 4 (e.g. [BF₄]⁻, NH₄⁺) | up to 6 or 7 (e.g. [AlF₆]³⁻, SF₆, IF₇) |
| Multiple bonds with itself | strong pπ–pπ (N≡N, O=O) | weak; prefers single bonds (P₄, S₈) |
| Physical state of element | N₂, O₂, F₂ are gases | P, S, I are solids at room temperature |
| Hydrogen bonding in hydrides | strong in NH₃, H₂O, HF | negligible in PH₃, H₂S, HCl |
| Typical behaviour | B: non-metal; F: only −1 state | Al: metal; Cl: +1 to +7 |
Worked example 1.1: Write the electronic configuration of thallium (Z = 81) and state its two oxidation states.
Solution: Xenon has Z = 54. After it come 6s² (56), 4f¹⁴ (70), 5d¹⁰ (80) and 6p¹ (81). So Tl is [Xe] 4f¹⁴ 5d¹⁰ 6s² 6p¹. Using all three valence electrons gives +3. Using only the 6p electron gives +1. Because of the inert pair effect, +1 is the more stable state for thallium.
Worked example 1.2: Aluminium has radius 143 pm and gallium 135 pm. Why is the heavier atom smaller?
Solution: Between Al (Z = 13) and Ga (Z = 31), the nuclear charge rises by 18. Ten of the added electrons are 3d electrons, which shield poorly. The outer 4s and 4p electrons of Ga therefore feel a higher effective nuclear charge and are pulled in. The extra shell is more than cancelled, so Ga ends up slightly smaller than Al.
Worked example 1.3: Arrange Al₂O₃, Cl₂O₇, SiO₂ and P₄O₁₀ in increasing acidic character.
Solution: Across Period 3 the elements become more non-metallic, so their oxides become more acidic. Increasing order: Al₂O₃ < SiO₂ < P₄O₁₀ < Cl₂O₇. Al₂O₃ is amphoteric and Cl₂O₇ is the anhydride of perchloric acid.
Worked example 1.4: PbCl₄ decomposes on gentle warming, but SnCl₄ is a stable liquid. Explain.
Solution: Both metals are in Group 14, so +4 is the group state. For lead, the inert pair effect makes +2 the more stable state. PbCl₄ therefore breaks down: PbCl₄ → PbCl₂ + Cl₂. For tin, +4 is still the more stable state, so SnCl₄ is stable.
Worked example 1.5: Nitrogen forms NCl₃ but not NCl₅. Phosphorus forms both PCl₃ and PCl₅. Why?
Solution: Nitrogen is in Period 2 and has only four valence orbitals (2s, 2pₓ, 2pᵧ, 2p_z). It cannot hold five bond pairs, so its covalency cannot exceed 4. Phosphorus has empty 3d orbitals. It can promote a 3s electron into 3d, form five bonds and become sp³d hybridised in PCl₅.
Worked example 1.6: Explain why nitrogen exists as N₂ while phosphorus exists as P₄.
Solution: Small N atoms come close enough for strong sideways pπ–pπ overlap. So N≡N, with one σ and two π bonds, is very stable (bond enthalpy about 946 kJ/mol). P atoms are larger. Their 3p orbitals overlap poorly sideways, so P≡P is weak. Phosphorus prefers three single P–P bonds per atom and forms tetrahedral P₄ molecules.
Worked example 1.7: Which is the stronger oxidising agent, Ga³⁺ or Tl³⁺? Which is the stronger reducing agent, Ge²⁺ or Pb²⁺?
Solution: For thallium, +1 is the stable state. Tl³⁺ readily gains two electrons to become Tl⁺, so Tl³⁺ is the stronger oxidising agent. For germanium, +4 is far more stable than +2, so Ge²⁺ readily loses two electrons. Pb²⁺ is already in lead's stable state. So Ge²⁺ is the stronger reducing agent.
Worked example 1.8: Boron forms [BF₄]⁻ but not [BF₆]³⁻. Aluminium forms [AlF₆]³⁻. Give two reasons.
Solution: First, boron has no d orbitals in its valence shell. With only one 2s and three 2p orbitals, it can accept at most four electron pairs, so its maximum covalency is 4. Aluminium can use 3d orbitals and reach covalency 6 (sp³d²). Second, boron is very small. Six fluoride ions cannot pack around it, while the larger Al³⁺ can hold six.
Quick revision
p-block = Groups 13–18, valence configuration ns² np¹⁻⁶ (He is 1s²).
Group oxidation state = group number − 10; inert pair state = group number − 12.
Inert pair effect grows down the group: Tl⁺, Pb²⁺, Bi³⁺ are the stable forms.
Poor shielding by 3d¹⁰ and 4f¹⁴ electrons gives kinks: Ga smaller than Al; IE of Tl higher than In.
Across a period: radius falls, IE and electronegativity rise, oxides go from amphoteric to strongly acidic.
First members: small, very electronegative, no d orbitals, maximum covalency 4, strong pπ–pπ multiple bonds.
Heavier members expand octets (PCl₅, SF₆) and form dπ–pπ bonds.
NEET traps
Writing Tl or Pb configurations without 4f¹⁴. The full form is [Xe] 4f¹⁴ 5d¹⁰ 6s² 6pˣ.
Assuming ionisation enthalpy always falls down Group 13. It does not: Ga > Al and Tl > In.
Mixing up oxidising and reducing: PbO₂ oxidises (Pb goes to +2); SnCl₂ reduces (Sn goes to +4).
Thinking the maximum covalency of nitrogen is 5 because HNO₃ has N in +5. Oxidation state and covalency are different. Nitrogen never forms more than four bonds.
Calling Ga a non-metal or B a metal. B is the only non-metal (metalloid) in Group 13.
Forgetting that fluorine shows only −1 (and 0) while other halogens show +1 to +7.
Practice MCQs: Chapter 1
Level 1: Concept check
1. The general valence shell configuration of p-block elements other than helium is (a) ns¹⁻² (b) (n−1)d¹⁻¹⁰ ns¹⁻² (c) ns² np¹⁻⁶ (d) ns² np⁶ only
2. The group oxidation state of Group 15 elements is (a) +5 (b) +3 (c) +7 (d) +4
3. Which element shows the inert pair effect most strongly? (a) B (b) Al (c) Ga (d) Tl
4. Which p-block element is a liquid at 25 °C? (a) Si (b) Br (c) I (d) P
5. Which of these is a metalloid? (a) N (b) As (c) Bi (d) Cl
6. The most electronegative element of the p-block is (a) O (b) Cl (c) N (d) F
7. The maximum covalency of nitrogen is (a) 4 (b) 3 (c) 5 (d) 6
8. Moving from Al to Cl across Period 3, the oxides in the highest oxidation state become (a) more basic (b) amphoteric throughout (c) more acidic (d) neutral
9. Which element readily forms pπ–pπ multiple bonds with itself? (a) Si (b) C (c) P (d) Ge
10. Down Group 14, which oxidation state becomes more stable? (a) +2 (b) +4 (c) −4 (d) +1
Level 2: NEET standard
11. The ground state configuration of lead (Z = 82) is (a) [Xe] 4f¹⁴ 5d¹⁰ 6s² 6p⁴ (b) [Xe] 5d¹⁰ 6s² 6p² (c) [Xe] 4f¹⁴ 6s² 6p² (d) [Xe] 4f¹⁴ 5d¹⁰ 6s² 6p²
12. The atomic radius of Ga is slightly smaller than that of Al because (a) Ga has more shells (b) Ga has a smaller mass (c) the 3d¹⁰ electrons of Ga shield poorly (d) of the inert pair effect
13. Which oxide is the strongest oxidising agent? (a) PbO₂ (b) SnO₂ (c) GeO₂ (d) SiO₂
14. Which chloride is a good reducing agent? (a) PbCl₂ (b) SnCl₂ (c) SiCl₄ (d) CCl₄
15. Which species does NOT exist? (a) PCl₅ (b) SF₆ (c) [AlF₆]³⁻ (d) NCl₅
16. The correct order of first ionisation enthalpy in Group 13 is (a) B > Al > Ga > In > Tl (b) B > Ga > Al > In > Tl (c) B > Tl > Ga > Al > In (d) Tl > B > Ga > Al > In
17. Which oxide is amphoteric? (a) SO₂ (b) Al₂O₃ (c) CO₂ (d) N₂O₅
18. Tl⁺ is more stable than Tl³⁺ because (a) the 6s electrons are reluctant to take part in bonding (b) Tl has vacant 6d orbitals (c) Tl is highly electronegative (d) Tl⁺ has a noble gas configuration
19. In which set does a filled 4f¹⁴ subshell lie beneath the valence shell? (a) Ga, Ge, As (b) Al, Si, P (c) In, Sn, Sb (d) Tl, Pb, Bi
20. Boron cannot form [BF₆]³⁻ mainly because (a) boron is a metal (b) boron is less electronegative than fluorine (c) boron has no d orbitals in its valence shell (d) boron has a high atomic mass
21. In which pair do both elements commonly show the +3 and +5 oxidation states? (a) P and Sb (b) N and O (c) F and Cl (d) B and Al
22. Which set of oxidation states is shown by chlorine but never by fluorine? (a) −1 only (b) +1, +3, +5, +7 (c) 0 only (d) −1 and 0
Level 3: Challenge
23. Element X forms XCl₂ and XCl₄. XCl₄ loses Cl₂ on gentle warming, and XO₂ oxidises HCl to Cl₂. X is (a) Si (b) C (c) Ge (d) Pb
24. The stability of the +1 oxidation state in Group 13 follows the order (a) Ga < In < Tl (b) Tl < In < Ga (c) In < Ga < Tl (d) Ga < Tl < In
25. Phosphorus exists as P₄ and not as P≡P at room temperature because (a) the P–P single bond is very weak (b) sideways overlap of the large 3p orbitals is poor (c) phosphorus has no lone pair (d) phosphorus is more electronegative than nitrogen
26. SF₆ exists but OF₆ does not. The best reason is (a) O is less electronegative than S (b) O is larger than S (c) O has no d orbitals and is too small to hold six F atoms (d) O cannot bond with F at all
27. How many of these elements show the inert pair effect clearly in their common chemistry: Tl, Pb, Bi, Al, Si, N? (a) 2 (b) 4 (c) 3 (d) 5
28. Which element has the most negative electron gain enthalpy? (a) F (b) O (c) Br (d) Cl
29. Assertion (A): Nitrogen exists as a diatomic molecule with a triple bond, but phosphorus exists as P₄. Reason (R): The small size of nitrogen allows effective pπ–pπ overlap. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: Down Group 15, the stability of the +5 state decreases and that of the +3 state increases. Statement II: Heavier p-block elements form stronger covalent bonds than the lighter members of their group. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | c | One to six electrons enter the np subshell after ns². |
| 2 | a | Group number − 10 = 15 − 10 = +5. |
| 3 | d | Period 6 element; 6s² pair poorly shielded by 4f and 5d. |
| 4 | b | Bromine is the only liquid non-metal; Si, I, P are solids. |
| 5 | b | Arsenic shows both metallic and non-metallic properties. |
| 6 | d | Fluorine has the highest electronegativity (4.0). |
| 7 | a | Only four valence orbitals (2s, 2p), as in NH₄⁺. |
| 8 | c | Non-metallic character rises, so oxides become more acidic. |
| 9 | b | Small C atoms overlap sideways well (C=C, C≡C). |
| 10 | a | Inert pair effect stabilises Group number − 12 = +2. |
| 11 | d | Full core: 4f¹⁴ 5d¹⁰, then 6s² 6p². |
| 12 | c | Poor shielding raises effective nuclear charge in Ga. |
| 13 | a | Pb⁴⁺ readily goes to the stable Pb²⁺. |
| 14 | b | Sn²⁺ is oxidised to the more stable Sn⁴⁺. |
| 15 | d | N has no d orbitals, so no covalency of 5. |
| 16 | c | Values: B 801, Tl 589, Ga 579, Al 577, In 558 kJ/mol. |
| 17 | b | Al₂O₃ reacts with both acids and bases. |
| 18 | a | Inert pair effect: 6s² is held tightly and bonds are weak. |
| 19 | d | Period 6 elements have 4f¹⁴ under 5d¹⁰ 6s 6p. |
| 20 | c | Only four valence orbitals, so covalency is limited to 4. |
| 21 | a | P and Sb both form +3 and +5 compounds; O never shows +5. |
| 22 | b | Cl uses d orbitals; F has none and is the most electronegative. |
| 23 | d | PbCl₄ → PbCl₂ + Cl₂; PbO₂ oxidises HCl. |
| 24 | a | Inert pair effect increases down the group. |
| 25 | b | Poor pπ–pπ overlap makes multiple bonds weak for P. |
| 26 | c | Period 2 element: covalency limited to 4 and very small size. |
| 27 | c | Tl, Pb and Bi; Al, Si and N do not. |
| 28 | d | Cl is more negative than F; F's small size causes electron repulsion. |
| 29 | a | Small N gives strong pπ–pπ bonds, which explains N≡N. |
| 30 | c | Heavier elements form weaker bonds, which is why the inert pair stays out. |
Chapter 1 revision sheet
One-page summary
p-block = Groups 13 to 18; the last electron enters a p orbital. General configuration ns² np¹⁻⁶ (helium, 1s², is the exception placed in Group 18).
Group oxidation state = group number − 10 (Group 13: +3 up to Group 18: +8 for Xe).
Down a group: atomic radius rises, ionisation enthalpy and electronegativity fall, metallic character rises.
Across a period (Group 13 → 17): radius falls, ionisation enthalpy and electronegativity rise, oxides change from basic/amphoteric to acidic.
Ga (135 pm) is smaller than Al (143 pm) because the ten 3d electrons shield poorly.
Ionisation enthalpy dips from Group 15 to Group 16 (N > O, P > S) because half-filled p³ is extra stable.
Inert pair effect: the ns² pair resists bonding in heavy elements, so the (group oxidation state − 2) becomes more stable down the group: Tl⁺, Pb²⁺, Bi³⁺.
Cause of the inert pair effect: poor shielding by d and f electrons holds the 6s pair tightly.
Consequence: Tl³⁺, PbO₂ and NaBiO₃ are oxidising agents; Sn²⁺ is a reducing agent.
First element of each group (B, C, N, O, F) is anomalous: small size, high electronegativity, no d orbitals.
First element: maximum covalency 4; forms strong pπ–pπ multiple bonds (C=C, N≡N, O=O, C=O).
Heavier elements use vacant d orbitals: expanded octet (PCl₅, SF₆, IF₇) and dπ–pπ bonds.
Non-metal → metalloid → metal down each group: B non-metal, Ge/As/Sb/Te metalloids, Tl/Pb/Bi/Po metals.
Must-remember table
| Group | Valence configuration | Group oxidation state | Lower state favoured by heavy member | First element special feature |
|---|---|---|---|---|
| 13 | ns² np¹ | +3 | +1 (Tl) | B: covalent, max covalency 4 |
| 14 | ns² np² | +4 | +2 (Pb) | C: catenation, pπ–pπ bonds |
| 15 | ns² np³ | +5 | +3 (Bi) | N: N≡N, no NCl₅ |
| 16 | ns² np⁴ | +6 | +4 and +2 (Po) | O: O=O, no OF₄, mostly −2 |
| 17 | ns² np⁵ | +7 | −1 most common | F: only −1 in compounds |
| 18 | ns² np⁶ | +8 (Xe) | +2, +4, +6 (Xe) | He: 1s², no compounds |
Memory aids
"Boring Aunties Gather In Teashops": B, Al, Ga, In, Tl (Group 13).
"Can Silly Germans Sell Pickles": C, Si, Ge, Sn, Pb (Group 14).
"Never Play Against Sachin Batting": N, P, As, Sb, Bi (Group 15).
"Old Students Search Ten Poems" (O, S, Se, Te, Po) and "Fat Cats Bring In Atoms" (F, Cl, Br, I, At).
Inert pair hook, "heavy and lazy": the heaviest member keeps its s pair at home, so it shows two fewer than the group number.
Concept connections
Size, ionisation enthalpy and electronegativity trends come from Chemistry Book 9: Classification of Elements and Periodicity in Properties.
Expanded octets, VSEPR shapes and pπ–pπ bonding are built in Chemistry Book 3: Chemical Bonding and Molecular Structure.
Oxidising power of PbO₂ and reducing power of SnCl₂ link to Chemistry Book 7: Redox Reactions and Electrochemistry.
Practice MCQs: Chapter 1, Level 4 (new NEET pattern)
31. Match List I (element) with List II (description).
List I
A. Boron
B. Germanium
C. Bismuth
D. Thallium
List II
i. Metal whose +1 state is more stable than +3
ii. Metalloid of Group 14
iii. Metal of Group 15 whose +3 state is more stable than +5
iv. Non-metal of Group 13
(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-iii, D-i (c) A-iv, B-iii, C-ii, D-i (d) A-i, B-ii, C-iii, D-iv
32. Match List I (fact) with List II (main reason).
List I
A. NCl₅ does not exist
B. PbCl₄ decomposes easily to PbCl₂
C. N₂ is very unreactive
D. SF₆ exists
List II
i. Inert pair effect
ii. Strong pπ–pπ triple bond
iii. Vacant d orbitals allow an expanded octet
iv. No d orbitals in the valence shell
(a) A-iii, B-i, C-ii, D-iv (b) A-iv, B-ii, C-i, D-iii (c) A-i, B-iv, C-iii, D-ii (d) A-iv, B-i, C-ii, D-iii
33. Match List I (element) with List II (its more stable oxidation state in compounds).
List I
A. Tl
B. Pb
C. Bi
D. Sn
List II
i. +3
ii. +1
iii. +4
iv. +2
(a) A-ii, B-iv, C-i, D-iii (b) A-i, B-iv, C-ii, D-iii (c) A-ii, B-iii, C-i, D-iv (d) A-iv, B-ii, C-iii, D-i
34. Match List I (oxide) with List II (nature).
List I
A. B₂O₃
B. Al₂O₃
C. Tl₂O
D. CO
List II
i. Amphoteric
ii. Neutral
iii. Acidic
iv. Basic
(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-iii, B-i, C-iv, D-ii (d) A-iv, B-i, C-iii, D-ii
35. How many of the following statements are correct?
A. The first ionisation enthalpy of N is greater than that of O.
B. The electron gain enthalpy of F is more negative than that of Cl.
C. Gallium has a smaller atomic radius than aluminium.
D. Electronegativity increases down Group 15.
E. Metallic character increases down Group 14.
(a) 2 (b) 4 (c) 5 (d) 3
36. Choose the correct set of statements about the first element of a p-block group.
A. The maximum covalency of nitrogen is 4.
B. Oxygen readily forms pπ–pπ double bonds.
C. Fluorine shows positive oxidation states in its oxoacids.
D. Boron cannot form [BF₆]³⁻.
(a) A and B only (b) A, B and D only (c) B, C and D only (d) A, C and D only
37. Choose the correct set of statements about the inert pair effect.
A. It becomes more marked down a group.
B. It arises from poor shielding of the ns² pair by inner d and f electrons.
C. It makes Pb(IV) compounds good reducing agents.
D. It makes Tl(I) more stable than Tl(III).
(a) A, B and D only (b) A and C only (c) B, C and D only (d) A, B, C and D
38. How many of the following species exist as stable compounds or ions?
PCl₅, NCl₅, SF₆, OF₄, [SiF₆]²⁻, [CF₆]²⁻, IF₇
(a) 3 (b) 5 (c) 4 (d) 2
39. The table gives the first ionisation enthalpies of four period-2 elements from Groups 14, 15, 16 and 17, in that order.
| Element | W | X | Y | Z |
|---|---|---|---|---|
| IE₁ (kJ/mol) | 1086 | 1402 | 1314 | 1681 |
The value for Y is lower than for X because (a) Y has a larger atomic radius than X (b) Y is a metalloid (c) X has an extra-stable half-filled 2p³ subshell, while Y loses a paired electron (d) Y has a lower nuclear charge than X
40. A plot of atomic radius (y-axis) against atomic number (x-axis) for Group 13 rises from B (85 pm) to Al (143 pm), dips at Ga (135 pm), then rises to In (167 pm) and Tl (170 pm). The dip at Ga is mainly due to (a) poor shielding by the ten 3d electrons (b) the inert pair effect (c) the lanthanoid contraction (d) a change from metal to non-metal
41. An element E of Group 14 forms two oxides, EO and EO₂. EO is the more stable oxide, and EO₂ readily oxidises concentrated HCl to Cl₂. E is (a) C (b) Si (c) Sn (d) Pb
Read this for Q42 and Q43. A student takes the highest oxides of period-3 p-block elements: Al₂O₃, SiO₂, P₄O₁₀, SO₃ and Cl₂O₇. She shakes each with dilute HCl and, separately, with dilute NaOH, and notes which ones react.
42. Which oxide reacts with both the acid and the base? (a) SiO₂ (b) Al₂O₃ (c) P₄O₁₀ (d) Cl₂O₇
43. The correct order of acidic character of these oxides is (a) Cl₂O₇ < SO₃ < P₄O₁₀ < SiO₂ (b) SO₃ < SiO₂ < Cl₂O₇ < P₄O₁₀ (c) P₄O₁₀ < SiO₂ < SO₃ < Cl₂O₇ (d) SiO₂ < P₄O₁₀ < SO₃ < Cl₂O₇
44. Which pair contains one oxidising agent and one reducing agent, both explained by the inert pair effect? (a) SnCl₄ and PbCl₂ (b) CO₂ and SiO₂ (c) SnCl₂ and PbO₂ (d) TlCl and BCl₃
45. Element X lies in period 4, has three unpaired electrons in its ground state and is a metalloid. X is (a) P (b) As (c) Sb (d) Ge
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | b | B non-metal; Ge metalloid; Bi prefers +3; Tl prefers +1 |
| 32 | d | N has no d orbitals; inert pair in Pb; N≡N; S uses d orbitals |
| 33 | a | Tl +1, Pb +2, Bi +3, Sn +4 (Sn²⁺ is reducing) |
| 34 | c | B₂O₃ acidic, Al₂O₃ amphoteric, Tl₂O basic, CO neutral |
| 35 | d | A, C, E true; Cl has the more negative ΔegH; EN falls down a group |
| 36 | b | F is always −1 (even in HOF); A, B, D are true |
| 37 | a | Inert pair makes Pb(IV) oxidising, not reducing |
| 38 | c | PCl₅, SF₆, [SiF₆]²⁻, IF₇ exist; N, O, C cannot exceed covalency 4 |
| 39 | c | N has half-filled 2p³; O loses a paired 2p electron more easily |
| 40 | a | 3d electrons shield poorly, so Ga's outer shell is pulled in |
| 41 | d | Pb(II) is the stable state; PbO₂ is a strong oxidiser |
| 42 | b | Al₂O₃ is amphoteric |
| 43 | d | Acidity rises across period 3 as non-metal character rises |
| 44 | c | Sn²⁺ → Sn⁴⁺ (reducing); Pb⁴⁺ → Pb²⁺ (oxidising) |
| 45 | b | As: [Ar] 3d¹⁰ 4s² 4p³, three unpaired, metalloid; Ge has two |