Chapter 2: Group 13: The Boron Family
What you will learn
The configurations and physical data of B, Al, Ga, In and Tl, and the kinks in their trends.
Why +3 dominates at the top and +1 at the bottom of the group.
Why boron trihalides are Lewis acids and why their strength order looks "wrong".
How boron differs from the rest of the group.
The structures NEET still asks about: boric acid, diborane and borazine.
2.1 Members and configurations
Group 13 has boron (B), aluminium (Al), gallium (Ga), indium (In) and thallium (Tl). Nihonium (Nh) is a synthetic element and not tested. All have three valence electrons, ns² np¹.
| Property | B | Al | Ga | In | Tl |
|---|---|---|---|---|---|
| Atomic number | 5 | 13 | 31 | 49 | 81 |
| Configuration | [He] 2s² 2p¹ | [Ne] 3s² 3p¹ | [Ar] 3d¹⁰ 4s² 4p¹ | [Kr] 4d¹⁰ 5s² 5p¹ | [Xe] 4f¹⁴ 5d¹⁰ 6s² 6p¹ |
| Atomic radius (pm) | 85 | 143 | 135 | 167 | 170 |
| First ionisation enthalpy (kJ/mol) | 801 | 577 | 579 | 558 | 589 |
| Electronegativity (Pauling) | 2.0 | 1.5 | 1.6 | 1.7 | 1.8 |
| Melting point (K) | about 2453 | 933 | 303 | 430 | 576 |
| Density (g/cm³) | 2.35 | 2.70 | 5.90 | 7.31 | 11.85 |
| Nature | metalloid | metal | metal | metal | metal |
The boron radius in the table is its covalent radius; the others are metallic radii.
2.2 Physical trends
Radius increases down the group, except that Ga is smaller than Al. The ten 3d electrons in Ga shield the nucleus poorly (Chapter 1).
Ionisation enthalpy drops sharply from B to Al, then changes irregularly. Ga is slightly above Al (poor 3d shielding), and Tl is above In (poor 4f and 5d shielding). The sum of the first three ionisation enthalpies is very high for boron, so B never forms a B³⁺ ion.
Electronegativity falls from B to Al and then rises slightly to Tl. This follows the same shielding story.
Melting point does not follow a smooth trend. Boron has a giant covalent network, so it melts above 2400 K. Gallium melts at 303 K, which is just above room temperature. It would melt in your palm on a warm Chennai afternoon. Gallium boils at about 2676 K, so it stays liquid over a very wide range and is used in high-temperature thermometers.
Density rises steadily down the group.
2.3 Chemical properties
Oxidation states. Boron and aluminium show +3. Down the group, +1 grows more stable. For Ga and In, +3 is still the main state. For Tl, +1 is the more stable state, and Tl³⁺ is an oxidising agent.
Nature of bonding. Boron is small with a high sum of ionisation enthalpies. It forms only covalent compounds. Aluminium forms ionic compounds in water (as hydrated Al³⁺) but its anhydrous chloride is covalent.
Electron deficiency of trihalides. In BX₃ and AlX₃, the central atom has only six electrons around it. These molecules are Lewis acids: they accept a lone pair to complete the octet.
In [BF₄]⁻, boron becomes sp³ and tetrahedral. Aluminium chloride completes its octet in a different way. Two AlCl₃ units join through chlorine bridges to form the dimer Al₂Cl₆, in which each Al is tetrahedral.
The Lewis acid order of boron trihalides. Electronegativity alone would make BF₃ the strongest acid. The real order is the opposite:
The reason is back bonding. The filled 2p orbital of F overlaps sideways with the empty 2p orbital of B (pπ–pπ). This puts electron density back on boron and reduces its hunger for a lone pair. Overlap is best between two 2p orbitals of similar size. It becomes poor for Cl (3p), Br (4p) and I (5p). So BF₃ has the most back bonding and is the weakest Lewis acid.
Reaction with air. Crystalline boron is quite unreactive. Aluminium forms a very thin oxide film on its surface that stops further attack. This is why your aluminium pressure cooker does not crumble even though aluminium is a reactive metal. On strong heating, both burn to give the oxide: 4E + 3O₂ → 2E₂O₃ (E = B or Al).
Nature of oxides. Acidic character falls and basic character rises down the group.
| Oxide | B₂O₃ | Al₂O₃ | Ga₂O₃ | In₂O₃ | Tl₂O |
|---|---|---|---|---|---|
| Nature | acidic | amphoteric | amphoteric | basic | strongly basic |
Reaction with acids and alkalis. Boron does not react with acids or alkalis under ordinary conditions. Aluminium dissolves in both, which shows its amphoteric nature:
Concentrated nitric acid makes aluminium passive by building up the oxide layer.
2.4 Anomalous behaviour of boron
Boron is very small and has a high ionisation enthalpy. It has no d orbitals. Together these make it different from aluminium. Boron shows a diagonal relationship with silicon instead (both are metalloids with acidic oxides and covalent hydrides).
| Property | Boron | Aluminium |
|---|---|---|
| Nature | non-metal (metalloid), poor conductor | metal, good conductor |
| Bonding | only covalent | ionic in water, covalent when anhydrous |
| Oxide | B₂O₃, acidic | Al₂O₃, amphoteric |
| Hydroxide | B(OH)₃, weak acid | Al(OH)₃, amphoteric |
| Maximum covalency | 4, e.g. [BF₄]⁻ | 6, e.g. [AlF₆]³⁻ |
| Hydrides | many stable boranes (B₂H₆, B₄H₁₀) | polymeric (AlH₃)ₓ |
| Melting point | very high (about 2453 K) | 933 K |
2.5 Compounds NEET still asks about
The 2026 syllabus has no preparation list, but these structures are asked as concept questions.
| Compound | Formula | Key idea for NEET |
|---|---|---|
| Borax | Na₂[B₄O₅(OH)₄]·8H₂O, often written Na₂B₄O₇·10H₂O | Alkaline in water; on heating gives a glassy bead (NaBO₂ + B₂O₃) used in the borax bead test for coloured metal ions |
| Boric acid | B(OH)₃, also written H₃BO₃ | Weak monobasic Lewis acid; planar BO₃ units linked by hydrogen bonds into layers |
| Diborane | B₂H₆ | Electron-deficient; two 3-centre 2-electron B–H–B bridge bonds |
| Borazine | B₃N₃H₆ | "Inorganic benzene": a six-membered ring of alternating B and N |
| Potash alum | K₂SO₄·Al₂(SO₄)₃·24H₂O | A double salt of aluminium, used to clear muddy water |
Boric acid is a Lewis acid, not a proton donor. Boron in B(OH)₃ has only six electrons. It accepts an OH⁻ from a water molecule, and the leftover H⁺ makes the solution acidic:
Each B(OH)₃ releases one H₃O⁺ this way, so boric acid is monobasic. It is weak (pKₐ about 9.2). Adding glycerol or another cis-diol ties up the [B(OH)₄]⁻ and lets boric acid be titrated with NaOH like a strong monobasic acid.
Structure of diborane. Count the electrons. Two B atoms give 6 valence electrons and six H atoms give 6, so B₂H₆ has only 12. Eight normal B–H bonds would need 16. So diborane is electron-deficient.
Four terminal H atoms form ordinary 2-centre 2-electron B–H bonds. These use 8 electrons. The two B atoms and these four H atoms lie in one plane.
The other two H atoms sit above and below that plane. Each holds the two B atoms together through a 3-centre 2-electron bond (a "banana bond"). These use the remaining 4 electrons.
Each boron is roughly sp³ hybridised.
Bridge B–H bonds (about 133 pm) are longer than terminal B–H bonds (about 119 pm), because two electrons are spread over three atoms.

Six atoms (two B and four terminal H) lie in the shaded plane; the two bridging H atoms sit above and below it, each sharing one electron pair with both borons.
Diborane catches fire in air and is hydrolysed by water:
With Lewis bases it splits into adducts such as H₃B←CO and H₃B←NMe₃. Heated with ammonia it gives borazine, B₃N₃H₆.
Worked example 2.1: Arrange BF₃, BCl₃ and BBr₃ in increasing Lewis acid strength and explain.
Solution: BF₃ < BCl₃ < BBr₃. In BF₃, the 2p orbital of each F overlaps well with the empty 2p orbital of B, so back bonding is strong. Boron's electron deficiency is partly filled. For Cl and Br the p orbitals are larger, overlap is poor and back bonding is weak. So boron stays more electron-deficient in BBr₃.
Worked example 2.2: Boric acid has three OH groups. Why is it monobasic?
Solution: Boric acid does not give up its own protons. It acts as a Lewis acid. One B(OH)₃ accepts one OH⁻ from water to form [B(OH)₄]⁻, releasing one H₃O⁺. Since boron can accept only one more electron pair (reaching covalency 4), only one H₃O⁺ is produced per molecule.
Worked example 2.3: How many electrons are used in the bridge bonds of diborane, and how many 3-centre bonds are there?
Solution: Total valence electrons = 2 × 3 + 6 × 1 = 12. Four terminal B–H bonds use 4 × 2 = 8 electrons. The remaining 12 − 8 = 4 electrons form two 3-centre 2-electron B–H–B bonds.
Worked example 2.4: 5.4 g of aluminium reacts with excess aqueous NaOH. Find the volume of hydrogen at STP (take 22.4 L/mol and Al = 27 g/mol).
Solution: Moles of Al = 5.4 / 27 = 0.2 mol. From 2Al + 2NaOH + 6H₂O → 2Na[Al(OH)₄] + 3H₂, 2 mol Al gives 3 mol H₂. So 0.2 mol Al gives 0.3 mol H₂. Volume = 0.3 × 22.4 = 6.72 L.
Worked example 2.5: Gallium melts at 303 K and boils at about 2676 K. Over what range is it a liquid, and why is this useful?
Solution: Liquid range = 2676 − 303 = 2373 K. A metal that stays liquid over more than 2000 K can fill a thermometer meant for very high temperatures, where mercury would boil away (mercury boils at about 630 K).
Worked example 2.6: AlCl₃ forms the dimer Al₂Cl₆, but BCl₃ stays a monomer. Why?
Solution: Both central atoms have only six electrons. Al is large enough to hold four Cl atoms around it, so it accepts a lone pair from a Cl of a neighbouring AlCl₃ and forms Cl bridges. Boron is too small to fit four large chlorine atoms. BCl₃ also gets some relief from pπ–pπ back bonding. So it remains monomeric.
Worked example 2.7: Arrange B₂O₃, Al₂O₃ and Tl₂O in order of increasing basic character.
Solution: Metallic character rises down the group, so oxides become more basic. B₂O₃ (acidic) < Al₂O₃ (amphoteric) < Tl₂O (strongly basic).
Worked example 2.8: The compound with formula TlI₃ looks like thallium(III) iodide. Use the inert pair effect to predict its real make-up.
Solution: For thallium, +1 is far more stable than +3, and Tl³⁺ is a strong oxidising agent. Iodide is a good reducing agent. So Tl³⁺ and I⁻ cannot sit together. The compound is actually Tl⁺[I₃]⁻, thallium(I) triiodide. Thallium is in +1, and the I₃⁻ ion is a linear triiodide ion.
Quick revision
Group 13: ns² np¹; B is a metalloid, the rest are metals.
Ga is smaller than Al; IE order B > Tl > Ga > Al > In.
Stability of +1: Ga < In < Tl. Tl⁺ is stable; Tl³⁺ oxidises.
BX₃ are Lewis acids; strength BF₃ < BCl₃ < BBr₃ because back bonding falls.
Oxides: B₂O₃ acidic, Al₂O₃ and Ga₂O₃ amphoteric, In₂O₃ and Tl₂O basic.
Boric acid is a weak monobasic Lewis acid: B(OH)₃ + 2H₂O → [B(OH)₄]⁻ + H₃O⁺.
Diborane: 12 valence electrons, 4 terminal 2c–2e bonds, 2 bridging 3c–2e bonds, B is sp³.
Boron's maximum covalency is 4; aluminium's is 6.
NEET traps
Putting BF₃ as the strongest Lewis acid because F is most electronegative. Back bonding reverses the order.
Calling boric acid tribasic or a Brønsted acid. It is a monobasic Lewis acid.
Saying diborane has "six B–H bonds of equal length". Bridge bonds are longer than terminal bonds.
Assuming all eight atoms of diborane lie in one plane. Only the two B and four terminal H do.
Writing IE as Al > Ga. Gallium's first ionisation enthalpy is slightly higher.
Forgetting that Al reacts with NaOH to give H₂; many students think metals react only with acids.
Practice MCQs: Chapter 2
Level 1: Concept check
1. Which Group 13 element is a non-metal (metalloid)? (a) Al (b) Ga (c) B (d) In
2. Which Group 13 element melts at about 303 K? (a) B (b) Al (c) Tl (d) Ga
3. The more stable oxidation state of thallium is (a) +1 (b) +3 (c) +2 (d) −3
4. Orthoboric acid is (a) H₂B₄O₇ (b) B(OH)₃ (c) HBO₂ (d) Na₂B₄O₇
5. BF₃ behaves as a (a) Lewis base (b) Brønsted acid (c) Lewis acid (d) neither acid nor base
6. The number of 3-centre 2-electron bonds in diborane is (a) 4 (b) 2 (c) 1 (d) 6
7. Which oxide is acidic? (a) Al₂O₃ (b) Tl₂O (c) Ga₂O₃ (d) B₂O₃
8. Aluminium vessels do not corrode quickly in air because (a) a thin protective oxide layer forms (b) aluminium is a noble metal (c) aluminium does not react with oxygen (d) aluminium forms a nitride coating
9. The hybridisation of boron in BF₃ is (a) sp (b) sp³ (c) sp² (d) dsp²
10. The maximum covalency of boron is (a) 3 (b) 4 (c) 6 (d) 5
Level 2: NEET standard
11. The correct order of Lewis acid strength is (a) BF₃ > BCl₃ > BBr₃ (b) BCl₃ > BF₃ > BBr₃ (c) BF₃ = BCl₃ = BBr₃ (d) BBr₃ > BCl₃ > BF₃
12. Boric acid is a weak monobasic acid because it (a) loses one of its three protons easily (b) accepts OH⁻ from water and releases one H₃O⁺ (c) ionises completely in water (d) contains a B=O double bond
13. The B–H–B bridges in diborane are (a) 2-centre 2-electron bonds (b) ionic bonds (c) 3-centre 2-electron bonds (d) hydrogen bonds
14. The hybridisation of each boron atom in B₂H₆ is (a) sp³ (b) sp² (c) sp (d) sp³d
15. 2.7 g of aluminium reacts completely with excess NaOH solution. The volume of H₂ at STP (22.4 L/mol) is (a) 2.24 L (b) 1.12 L (c) 4.48 L (d) 3.36 L
16. Aluminium chloride exists as Al₂Cl₆ in the vapour at moderate temperatures because (a) Al is too small to bond with Cl (b) the Al–Cl bond is ionic (c) each Al completes its octet by accepting a lone pair from a Cl of the other unit (d) the two units are held by hydrogen bonds
17. Which pair contains only amphoteric oxides? (a) B₂O₃, Al₂O₃ (b) Al₂O₃, Ga₂O₃ (c) In₂O₃, Tl₂O (d) B₂O₃, Tl₂O
18. Which statement about gallium is correct? (a) Its first ionisation enthalpy is lower than that of Al (b) It is a non-metal (c) It shows only the +1 state (d) It stays liquid over a very wide temperature range
19. Diborane reacts with water to give (a) B(OH)₃ and H₂ (b) B₂O₃ and H₂ (c) HBO₂ and O₂ (d) B and H₂O₂
20. "Inorganic benzene" is (a) B₂H₆ (b) Na₂B₄O₇ (c) B₃N₃H₆ (d) (BN)ₓ
21. Boron shows a diagonal relationship with (a) Al (b) Si (c) C (d) Mg
22. The compound TlI₃ is made of (a) Tl³⁺ and three I⁻ (b) Tl²⁺, I⁻ and an I atom (c) Tl⁺ and three I⁻ (d) Tl⁺ and I₃⁻
Level 3: Challenge
23. The order BF₃ < BCl₃ < BBr₃ in Lewis acid strength is best explained by (a) pπ–pπ back bonding that weakens from F to Br (b) the electronegativity of the halogen (c) the change in the size of boron (d) steric crowding around boron
24. How many atoms of diborane lie in one common plane? (a) 4 (b) 8 (c) 6 (d) 2
25. 0.62 g of boric acid (take M = 62 g/mol) is titrated with NaOH after adding glycerol. Moles of NaOH needed are (a) 0.01 (b) 0.03 (c) 0.02 (d) 0.005
26. Which species does NOT exist? (a) [BF₆]³⁻ (b) [BF₄]⁻ (c) [AlF₆]³⁻ (d) [Ga(OH)₄]⁻
27. Element E of Group 13 shows +1 and +3 states. E⁺ salts are stable in water, while E³⁺ oxidises iodide ions. E is (a) Al (b) Ga (c) In (d) Tl
28. The correct order of atomic radius is (a) B < Al < Ga < In < Tl (b) B < Ga < Al < In < Tl (c) Ga < B < Al < Tl < In (d) B < Al < In < Ga < Tl
29. Assertion (A): Boric acid is a weak monobasic acid. Reason (R): Each of the three OH groups of B(OH)₃ gives up its proton in water. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: Boron trihalides act as Lewis bases. Statement II: Aluminium dissolves in both dilute HCl and aqueous NaOH, releasing hydrogen. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | c | B is a metalloid; the rest are metals. |
| 2 | d | Gallium melts at 303 K. |
| 3 | a | Inert pair effect makes Tl⁺ more stable. |
| 4 | b | Orthoboric acid is B(OH)₃ (H₃BO₃). |
| 5 | c | Six electrons on B; it accepts a lone pair. |
| 6 | b | Two B–H–B bridges. |
| 7 | d | B₂O₃ is the acidic oxide of the group. |
| 8 | a | Al₂O₃ film protects the metal. |
| 9 | c | Three bond pairs, no lone pair: sp², trigonal planar. |
| 10 | b | No d orbitals: four orbitals, as in [BF₄]⁻. |
| 11 | d | Back bonding is strongest in BF₃, so it is the weakest acid. |
| 12 | b | Lewis acid: B(OH)₃ + 2H₂O → [B(OH)₄]⁻ + H₃O⁺. |
| 13 | c | Two electrons hold three atoms (B, H, B). |
| 14 | a | Four bonding regions around each B. |
| 15 | d | 0.1 mol Al gives 0.15 mol H₂ = 3.36 L. |
| 16 | c | Cl bridges give each Al an octet. |
| 17 | b | Al₂O₃ and Ga₂O₃ react with acids and bases. |
| 18 | d | Melts at 303 K, boils near 2676 K. |
| 19 | a | B₂H₆ + 6H₂O → 2B(OH)₃ + 6H₂. |
| 20 | c | Borazine is isoelectronic and isostructural with benzene. |
| 21 | b | B and Si: metalloids, acidic oxides, covalent hydrides. |
| 22 | d | Tl³⁺ would oxidise I⁻; real form is Tl⁺[I₃]⁻. |
| 23 | a | 2p–2p overlap is best for F, so BF₃ is least electron-deficient. |
| 24 | c | Two B and four terminal H atoms. |
| 25 | a | 0.62/62 = 0.01 mol; monobasic, so 0.01 mol NaOH. |
| 26 | a | Boron's covalency cannot exceed 4. |
| 27 | d | Inert pair effect is strongest for Tl. |
| 28 | b | Ga (135 pm) is smaller than Al (143 pm). |
| 29 | c | It is monobasic because it accepts OH⁻, not because it loses three protons. |
| 30 | d | BX₃ are Lewis acids; Al is amphoteric. |
Chapter 2 revision sheet
One-page summary
Group 13: B, Al, Ga, In, Tl (and Nh). Valence configuration ns² np¹.
B is a non-metal (covalent, very high melting point); Al to Tl are metals.
Ga melts at about 303 K but boils near 2676 K, so it is liquid over a very wide range.
Radius: Ga (135 pm) < Al (143 pm) because 3d electrons shield poorly.
First ionisation enthalpy does not fall smoothly: B > Tl > Ga > Al > In.
Main oxidation state +3; the +1 state grows more stable down the group (Tl⁺ more stable than Tl³⁺).
BX₃ molecules are electron deficient (6 electrons on B), planar, sp², and act as Lewis acids.
Lewis acid strength: BF₃ < BCl₃ < BBr₃ < BI₃, because pπ–pπ back bonding is strongest from small F.
AlCl₃ dimerises to Al₂Cl₆ (vapour, non-polar solvents): two Cl bridges, each Al sp³.
Boric acid B(OH)₃ is a weak monobasic Lewis acid: it accepts OH⁻ from water, it does not give its own H⁺.
Diborane B₂H₆: 4 terminal B–H (2c–2e), 2 bridging B–H–B (3c–2e, banana bonds), each B sp³, 12 valence electrons in all.
Diborane hydrolysis: B₂H₆ + 6H₂O → 2B(OH)₃ + 6H₂. Combustion gives B₂O₃ with a large heat release.
Al dissolves in NaOH: 2Al + 2NaOH + 6H₂O → 2Na[Al(OH)₄] + 3H₂. Conc. HNO₃ makes Al passive.
Oxides: B₂O₃ acidic; Al₂O₃ and Ga₂O₃ amphoteric; In₂O₃ and Tl₂O₃ basic.
B is anomalous: max covalency 4 ([BF₄]⁻, no [BF₆]³⁻), only covalent compounds, acidic oxide.
Must-remember table
| Species | Hybridisation of B or Al | Shape or structure | Key fact |
|---|---|---|---|
| BF₃ | sp² | Trigonal planar | Weakest Lewis acid of BX₃ (back bonding) |
| [BF₄]⁻ | sp³ | Tetrahedral | B reaches its maximum covalency of 4 |
| B(OH)₃ | sp² | Planar BO₃ units, H-bonded layers | Monobasic Lewis acid |
| [B(OH)₄]⁻ | sp³ | Tetrahedral | Formed when boric acid takes OH⁻ |
| B₂H₆ | sp³ | Two bridging H, four terminal H | Two 3c–2e bonds |
| Al₂Cl₆ | sp³ | Two edge-shared tetrahedra | Cl bridges complete Al's octet |
| [Al(OH)₄]⁻ | sp³ | Tetrahedral | Product of Al + NaOH |
Memory aids
"BF₃ is the Big Faker": it looks the most electron-poor (F is most electronegative) but it is the weakest Lewis acid, because F pushes electron density back into B.
Diborane "4-2-2": 4 terminal H, 2 bridging H, 2 banana (3c–2e) bonds.
IE₁ order "Big Tall Giraffes Always Itch": B > Tl > Ga > Al > In.
Boric acid, "the one-take acid": it takes one OH⁻ from water, so it is monobasic.
Concept connections
Back bonding, 3c–2e bonds and sp²/sp³ hybridisation come from Chemistry Book 3: Chemical Bonding and Molecular Structure.
Lewis acids and the weak acidity of boric acid connect to Chemistry Book 6: Equilibrium.
Gas-volume problems on Al + NaOH and diborane hydrolysis use mole ratios from Chemistry Book 1: Some Basic Concepts in Chemistry.
Practice MCQs: Chapter 2, Level 4 (new NEET pattern)
31. Match List I (species) with List II (feature).
List I
A. BF₃
B. [BF₄]⁻
C. B₂H₆
D. Al₂Cl₆
List II
i. Contains two 3c–2e bonds
ii. Halogen bridges between two metal atoms
iii. sp², planar
iv. sp³, tetrahedral, B at maximum covalency
(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-iv, C-i, D-ii (d) A-i, B-iv, C-iii, D-ii
32. Match List I (element) with List II (property).
List I
A. B
B. Ga
C. Tl
D. Al
List II
i. Melting point of about 303 K
ii. Made passive by concentrated HNO₃
iii. +1 state more stable than +3
iv. Highest melting point in the group
(a) A-iv, B-i, C-iii, D-ii (b) A-i, B-iv, C-iii, D-ii (c) A-iv, B-iii, C-i, D-ii (d) A-ii, B-i, C-iii, D-iv
33. Match List I (reactants) with List II (products).
List I
A. B₂H₆ + H₂O
B. Al + NaOH(aq)
C. B(OH)₃ + H₂O
D. B₂H₆ + O₂
List II
i. B₂O₃ + H₂O
ii. [B(OH)₄]⁻ + H₃O⁺
iii. Na[Al(OH)₄] + H₂
iv. H₃BO₃ + H₂
(a) A-iii, B-iv, C-ii, D-i (b) A-iv, B-ii, C-iii, D-i (c) A-i, B-iii, C-ii, D-iv (d) A-iv, B-iii, C-ii, D-i
34. Match List I (boron halide) with List II (its rank as a Lewis acid among the four).
List I
A. BF₃
B. BCl₃
C. BBr₃
D. BI₃
List II
i. Strongest
ii. Weakest
iii. Second strongest
iv. Second weakest
(a) A-i, B-iii, C-iv, D-ii (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-iii, C-iv, D-i (d) A-iv, B-ii, C-iii, D-i
35. How many of the following statements about diborane are correct?
A. Each boron atom is sp³ hybridised.
B. The molecule has four 3c–2e bonds.
C. Bridging B–H bonds are longer than terminal B–H bonds.
D. The two B atoms and four terminal H atoms lie in one plane.
E. It burns in air with a large release of heat.
(a) 3 (b) 4 (c) 2 (d) 5
36. Choose the correct set of statements about boric acid.
A. It is a tribasic protic acid.
B. It acts as an acid by accepting OH⁻ from water.
C. Boron in B(OH)₃ is sp² hybridised.
D. Its crystals have layers held by hydrogen bonds.
(a) A and B only (b) A, C and D only (c) B and C only (d) B, C and D only
37. Choose the correct set of statements about Group 13.
A. First ionisation enthalpy order is B > Tl > Ga > Al > In.
B. The atomic radius of Ga is smaller than that of Al.
C. The stability of the +1 state decreases down the group.
D. Boron has the highest electronegativity in the group.
(a) A, B and D only (b) B and D only (c) A, C and D only (d) C and D only
38. How many of the following can act as Lewis acids?
BF₃, AlCl₃, B(OH)₃, NH₃, [BF₄]⁻, GaCl₃
(a) 3 (b) 5 (c) 4 (d) 6
39. The first ionisation enthalpies of the five Group 13 elements are given in random order.
| Label | V | W | X | Y | Z |
|---|---|---|---|---|---|
| IE₁ (kJ/mol) | 558 | 589 | 801 | 577 | 579 |
Which label is most likely thallium? (a) V (b) X (c) Y (d) W
40. A bar chart of melting points down Group 13 shows B near 2450 K, Al 933 K, a sharp minimum at about 303 K, then In 430 K and Tl 577 K. The minimum belongs to (a) Ga, because of its unusual structure built from Ga₂ pairs (b) In, because of the inert pair effect (c) Al, because its metallic bonding is weakest (d) Ga, because d-block contraction makes it the largest atom
41. 8.1 g of aluminium reacts completely with excess aqueous NaOH. The volume of H₂ at STP (22.4 L/mol, Al = 27) is (a) 6.72 L (b) 3.36 L (c) 10.08 L (d) 13.44 L
Read this for Q42 and Q43. A cylinder in a lab leaks diborane into a humid storeroom. A safety officer estimates that 0.20 mol of B₂H₆ reacted completely with water vapour before the room was aired. A white solid was later found on the shelves.
42. The amount of H₂ released by this reaction is (a) 0.60 mol (b) 1.20 mol (c) 0.40 mol (d) 1.80 mol
43. The white solid and its behaviour in water are best described as (a) B₂O₃, a basic oxide (b) H₃BO₃, a tribasic protic acid (c) [BH₄]⁻, a strong reducing ion (d) B(OH)₃, a weak monobasic Lewis acid
44. BF₃ is a weaker Lewis acid than BCl₃ although F is more electronegative than Cl. The best reason is (a) effective pπ–pπ back donation from F 2p to the empty B 2p orbital (b) the B–F bond is weaker than the B–Cl bond (c) BF₃ is pyramidal, not planar (d) F is a larger atom than Cl
45. AlCl₃ exists as Al₂Cl₆ in the vapour, but in water it gives [Al(H₂O)₆]³⁺. The hybridisation of Al in these two species is, respectively, (a) sp² and sp³ (b) sp³ and sp³d² (c) sp³ and sp³ (d) sp² and sp³d²
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | c | BF₃ sp²; [BF₄]⁻ sp³; B₂H₆ two 3c–2e; Al₂Cl₆ Cl bridges |
| 32 | a | B highest mp; Ga about 303 K; Tl prefers +1; Al passive in conc. HNO₃ |
| 33 | d | Hydrolysis, Al + NaOH, Lewis acid action, combustion |
| 34 | b | Lewis acidity BF₃ < BCl₃ < BBr₃ < BI₃ |
| 35 | b | A, C, D, E true; there are only two 3c–2e bonds |
| 36 | d | It is monobasic and acts by accepting OH⁻ |
| 37 | a | +1 state becomes more stable down the group, so C is false |
| 38 | c | BF₃, AlCl₃, B(OH)₃, GaCl₃ accept electron pairs |
| 39 | d | Tl (589) is second only to B (801) because of poor 4f/5d shielding |
| 40 | a | Ga has an unusual structure (Ga₂ units), so it melts near 303 K |
| 41 | c | 0.3 mol Al → 0.45 mol H₂ → 0.45 × 22.4 = 10.08 L |
| 42 | b | B₂H₆ + 6H₂O → 2B(OH)₃ + 6H₂; 0.20 × 6 = 1.20 mol |
| 43 | d | Product is boric acid, a monobasic Lewis acid |
| 44 | a | Back bonding is strongest with F (2p–2p overlap) |
| 45 | b | 4 bonds (two bridging) → sp³; 6 water ligands → sp³d² |