Chapter 7 of 11 · 22 min read

Chapter 5: Group 16: The Oxygen Family

What you will learn

  • The configurations and trends of O, S, Se, Te and Po (the chalcogens).

  • How the hydrides H₂E change in bond angle, acidity, stability and boiling point.

  • The oxidation states −2, +2, +4 and +6, and the halides and oxides they give.

  • Why oxygen behaves differently from sulphur.

  • The structure and reactions of ozone and the structures of the oxoacids of sulphur.

5.1 Members and configurations

Group 16 has oxygen (O), sulphur (S), selenium (Se), tellurium (Te) and polonium (Po). Polonium is radioactive. The group name "chalcogens" means "ore formers", because many metal ores are oxides and sulphides. Each has six valence electrons, ns² np⁴.

PropertyOSSeTePo
Atomic number816345284
Configuration[He] 2s² 2p⁴[Ne] 3s² 3p⁴[Ar] 3d¹⁰ 4s² 4p⁴[Kr] 4d¹⁰ 5s² 5p⁴[Xe] 4f¹⁴ 5d¹⁰ 6s² 6p⁴
Covalent radius (pm)66104117137146
First ionisation enthalpy (kJ/mol)13141000941869813
Electron gain enthalpy (kJ/mol)−141−200−195−190−174
Electronegativity3.52.442.482.011.76
Naturenon-metal, gasnon-metalmetalloidmetalloidmetal
  • Radius rises down the group; ionisation enthalpy falls. Group 16 has lower ionisation enthalpies than Group 15 in the same period, because removing one electron from p⁴ gives a stable half-filled p³.

  • Electron gain enthalpy is less negative for O than for S. The O atom is so small that an incoming electron is strongly repelled by the electrons already there. From S onward, the value becomes less negative down the group.

  • Electronegativity falls down the group. Oxygen is second only to fluorine.

  • Metallic character rises: O and S non-metals, Se and Te metalloids, Po a metal.

  • State: oxygen is a diatomic gas, O₂. Sulphur is a solid made of S₈ rings.

5.3 Hydrides H₂E

All form hydrides H₂E. Each has two bond pairs and two lone pairs, so each is bent.

PropertyH₂OH₂SH₂SeH₂Te
Melting point (K)273188208222
Boiling point (K)373213232269
H–E–H angle104.5°92°91°90°
ΔfH (kJ/mol)−286−20+73+100
First acid dissociation constant1.8 × 10⁻¹⁶1.3 × 10⁻⁷1.3 × 10⁻⁴2.3 × 10⁻³

Trends to remember:

  1. Acidity rises down the group: H₂O < H₂S < H₂Se < H₂Te. The E–H bond gets longer and weaker, so H⁺ leaves more easily. Electronegativity is not the controlling factor here.

  2. Thermal stability falls: H₂O > H₂S > H₂Se > H₂Te. The ΔfH values turn from strongly negative to positive.

  3. Reducing power rises down the group. H₂O is hardly reducing; H₂Te is a strong reducing agent.

  4. Bond angle falls from 104.5° to about 90°, for the same reason as in Group 15.

  5. Boiling point: H₂O boils far above H₂S because of hydrogen bonding. From H₂S to H₂Te, boiling point rises with size. Figure 4.1 shows this jump for all three groups.

5.4 Oxidation states, halides and oxides

  • Oxygen shows −2 almost always. It shows −1 in peroxides (H₂O₂), −1/2 in superoxides (KO₂), +1 in O₂F₂ and +2 in OF₂. It never shows +4 or +6, because no element except F is more electronegative.

  • S, Se and Te show −2, +2, +4 and +6. The +4 and +6 states are more common in their compounds with oxygen and fluorine. Down the group, +4 becomes more stable than +6 (inert pair effect). SO₂ is a reducing agent; SeO₂ and TeO₂ are oxidising.

  • Halides: the hexahalides are only fluorides: SF₆, SeF₆, TeF₆. SF₆ is exceptionally inert, because six F atoms shield the small S atom from attack, much like the fielders guarding a batsman in a close-in field. Tetrafluorides EF₄ are see-saw shaped (sp³d, one lone pair). Dihalides EX₂ are bent.

  • Oxides: EO₂ and EO₃. SO₂ is a gas; SeO₂ is a volatile solid; TeO₂ is an ionic solid. Reducing power falls from SO₂ to TeO₂. SO₃ is the anhydride of sulphuric acid.

5.5 Anomalous behaviour of oxygen

Oxygen is small, very electronegative and has no d orbitals. So it differs from sulphur:

FeatureOxygenSulphur
MoleculeO₂, a diatomic gas with O=O (pπ–pπ)S₈ puckered rings, solid
Catenationweak; O–O single bond weak (lone pair repulsion)strong; S–S chains and rings
Hydrogen bonding in hydridestrong; H₂O is a liquidnegligible; H₂S is a gas
Oxidation statesmainly −2−2 to +6
Maximum covalency4 (rarely beyond 2 in practice)6, as in SF₆
Magnetic nature of the diatomic moleculeO₂ paramagneticS₂ (in vapour) also paramagnetic

Allotropes of sulphur. Rhombic sulphur (α) is yellow and stable below 369 K. Monoclinic sulphur (β) is stable above 369 K. Both contain S₈ puckered (crown-shaped) rings; they differ only in how the rings pack. At about 369 K the two forms are in equilibrium (transition temperature). At high temperature, S₂ molecules form in the vapour and are paramagnetic like O₂.

5.6 Ozone

Ozone (O₃) is an allotrope of oxygen. It forms when a silent electric discharge passes through dry oxygen:

3O2(g)→2O3(g)ΔH=+142 kJ/mol\mathrm{3O_2(g) \rightarrow 2O_3(g)}\qquad \Delta H = +142\ \text{kJ/mol}

The forward reaction is endothermic, so ozone is unstable with respect to O₂ and decomposes easily. That is also why ozone is a strong oxidising agent:

O3→O2+[O]\mathrm{O_3 \rightarrow O_2 + [O]}
Feature of O₃Value or fact
Shapebent (angular), central O is sp² with one lone pair
Bond angleabout 117°
O–O bond lengthsboth equal, about 128 pm (resonance)
Bond order1.5
Magnetic naturediamagnetic
Key reactionsPbS + 4O₃ → PbSO₄ + 4O₂; 2I⁻ + H₂O + O₃ → 2OH⁻ + I₂ + O₂ (used to estimate ozone)
DepletionNO + O₃ → NO₂ + O₂; chlorine atoms from CFCs also destroy it

The ozone layer in the stratosphere absorbs harmful ultraviolet radiation from the sun.

5.7 Oxoacids of sulphur and sulphuric acid

Sulphur forms many oxoacids. Most are known only in solution or as salts. For NEET, learn the structure, the oxidation state of S and the special bond.

AcidFormulaOxidation state of SS=OS–OHSpecial bond
SulphurousH₂SO₃+412none (one lone pair on S)
SulphuricH₂SO₄+622none
ThiosulphuricH₂S₂O₃+2 (average)12S=S
Pyrosulphuric (oleum)H₂S₂O₇+642S–O–S
Peroxomonosulphuric (Caro's acid)H₂SO₅+621S–O–O–H (peroxide)
Peroxodisulphuric (Marshall's acid)H₂S₂O₈+642S–O–O–S (peroxide)
DithionicH₂S₂O₆+542S–S

In peroxoacids, two O atoms in the O–O link are each at −1, not −2. So S stays at +6, never +7 or +8.

Figure 5.1 · Structures of the oxoacids of sulphur
Figure 5.1 · Structures of the oxoacids of sulphur

The orange oxygen atoms form peroxide links; because each is at −1, sulphur in Caro’s and Marshall’s acids is still +6.

Sulphuric acid in brief. It is made by the Contact process. The key step is the catalytic oxidation of SO₂:

2SO2(g)+O2(g)⇌2SO3(g)ΔH=−196.6 kJ/mol (V2O5 catalyst)\mathrm{2SO_2(g) + O_2(g) \rightleftharpoons 2SO_3(g)}\qquad \Delta H = -196.6\ \text{kJ/mol}\ (\mathrm{V_2O_5}\ \text{catalyst})

SO₃ is absorbed in H₂SO₄ to give oleum (H₂S₂O₇), which is diluted to the required strength. H₂SO₄ is a strong dibasic acid, a powerful dehydrating agent (it chars sugar: C₁₂H₂₂O₁₁ → 12C + 11H₂O) and, when hot and concentrated, an oxidising agent.

Worked example 5.1: Arrange H₂O, H₂S, H₂Se and H₂Te in increasing acid strength and explain.

Solution: H₂O < H₂S < H₂Se < H₂Te. Down the group, the E–H bond becomes longer and weaker. Less energy is needed to break it and release H⁺. Electronegativity actually falls down the group, so bond strength, not electronegativity, controls the order.

Worked example 5.2: Both O–O bonds in ozone are 128 pm long. A normal O–O single bond is about 148 pm and O=O is about 121 pm. Explain and find the bond order.

Solution: Ozone is a resonance hybrid of two structures. In one, the left bond is double and the right is single; in the other, the reverse. The real molecule is the average, so each bond has bond order (1 + 2) / 2 = 1.5. Its length (128 pm) lies between those of a single and a double bond.

Worked example 5.3: Find the oxidation state of S in H₂SO₅.

Solution: A blind calculation gives 2(+1) + x + 5(−2) = 0, so x = +8. That is impossible, since sulphur has only six valence electrons. H₂SO₅ has one peroxide link (O–O), in which each O is −1. Redo it: 2(+1) + x + 3(−2) + 2(−1) = 0, so x = +6.

Worked example 5.4: Rhombic and monoclinic sulphur have the same molecular formula. How do they differ?

Solution: Both are made of S₈ crown-shaped rings. They differ in how the rings pack in the crystal. Rhombic sulphur is the stable form below 369 K and monoclinic above it. At 369 K both can coexist; this is the transition temperature.

Worked example 5.5: 1 L of oxygen is passed through an ozoniser. The volume falls by 40 mL at the same temperature and pressure. What volume of ozone is formed?

Solution: 3O₂ → 2O₃. Three volumes of O₂ give two volumes of O₃, a fall of one volume. So the volume of O₃ formed is twice the contraction. Contraction = 40 mL, so O₃ formed = 2 × 40 = 80 mL. The O₂ used = 3 × 40 = 120 mL.

Worked example 5.6: Count the S=O, S–OH and S–O–S bonds in pyrosulphuric acid, H₂S₂O₇.

Solution: Two SO₄ tetrahedra share one O. Each S has two S=O and one S–OH, and both S atoms bond to the bridging O. So S=O = 4, S–OH = 2, S–O–S bridge = 1. Check the oxygen count: 4 + 2 + 1 = 7.

Worked example 5.7: Oxygen is a gas but sulphur is a solid at room temperature. Explain.

Solution: O is small and forms a strong pπ–pπ double bond with another O. So it exists as separate O₂ molecules with only weak forces between them. S is larger, and its pπ–pπ bonds are weak. S prefers two single S–S bonds per atom and forms S₈ rings. These larger molecules pack into a solid.

Worked example 5.8: SO₂ is a reducing agent but TeO₂ acts as an oxidising agent. Use the inert pair effect to explain.

Solution: For sulphur, +6 is more stable than +4. So S(IV) in SO₂ tends to go up to S(VI) and acts as a reducing agent. For tellurium, the inert pair effect makes +4 more stable than +6, and Te(IV) can be reduced to lower states. So the reducing power of the dioxides falls from SO₂ to TeO₂.

Quick revision

  • Group 16: ns² np⁴; IE lower than Group 15 in the same period.

  • ΔegH: S is most negative (−200 kJ/mol); O is less negative (−141) due to its small size.

  • H₂E: acidity and reducing power rise down; stability and bond angle fall; H₂O boils highest (hydrogen bonds).

  • O shows mainly −2; S, Se, Te show up to +6; +4 grows more stable down the group.

  • Only fluorides form hexahalides: SF₆ is very inert.

  • Rhombic S (stable below 369 K) and monoclinic S both have S₈ rings.

  • O₃: bent, sp², about 117°, both bonds 128 pm, bond order 1.5, diamagnetic, strong oxidiser.

  • Peroxoacids (H₂SO₅, H₂S₂O₈) have S in +6; O–O oxygen atoms are −1.

NEET traps

  • Saying O has the most negative electron gain enthalpy in Group 16. Sulphur does.

  • Calculating +8 for S in H₂SO₅ or +7 in H₂S₂O₈. Remember the peroxide oxygens.

  • Thinking H₂O is the strongest acid because O is the most electronegative. It is the weakest.

  • Drawing ozone as linear or as a triangle. It is bent.

  • Thinking rhombic and monoclinic sulphur have different molecules. Both are S₈.

  • Forgetting that the bond angle in H₂O (104.5°) is larger than in H₂S (92°).

Practice MCQs: Chapter 5

Level 1: Concept check

1. The stable form of sulphur at room temperature is (a) monoclinic (b) plastic (c) S₂ (d) rhombic

2. The shape of the ozone molecule is (a) linear (b) bent (c) a closed triangle (d) tetrahedral

3. Which hydride is the most acidic? (a) H₂Te (b) H₂Se (c) H₂S (d) H₂O

4. The oxidation state of S in H₂SO₄ is (a) +4 (b) +2 (c) +6 (d) +8

5. The radioactive member of Group 16 is (a) Te (b) Po (c) Se (d) S

6. Which Group 16 element has the most negative electron gain enthalpy? (a) O (b) Se (c) Te (d) S

7. Rhombic sulphur consists of (a) S₂ molecules (b) S₆ rings (c) S₈ rings (d) S₄ chains

8. Which hydride has the highest boiling point? (a) H₂O (b) H₂S (c) H₂Se (d) H₂Te

9. The ozone layer protects living things by absorbing (a) infrared rays (b) visible light (c) microwaves (d) ultraviolet rays

10. The most common oxidation state of oxygen is (a) +2 (b) −2 (c) +6 (d) +4

Level 2: NEET standard

11. The correct order of H–E–H bond angle is (a) H₂Te > H₂Se > H₂S > H₂O (b) H₂S > H₂O > H₂Se > H₂Te (c) H₂O > H₂S > H₂Se > H₂Te (d) all are 104.5°

12. The correct order of thermal stability is (a) H₂O > H₂S > H₂Se > H₂Te (b) H₂Te > H₂Se > H₂S > H₂O (c) H₂S > H₂O > H₂Se > H₂Te (d) H₂Se > H₂Te > H₂S > H₂O

13. A peroxide linkage is present in (a) H₂SO₄ (b) H₂S₂O₇ (c) H₂SO₃ (d) H₂S₂O₈

14. The oxidation state of S in H₂SO₅ is (a) +8 (b) +6 (c) +7 (d) +4

15. The two O–O bonds in ozone are (a) equal, about 128 pm each (b) 121 pm and 148 pm (c) equal, about 148 pm each (d) equal, about 121 pm each

16. Which fluoride does NOT exist? (a) SF₆ (b) SF₄ (c) OF₄ (d) SeF₆

17. Which oxide acts as a reducing agent? (a) SO₃ (b) SeO₂ (c) TeO₃ (d) SO₂

18. The transition temperature between rhombic and monoclinic sulphur is about (a) 273 K (b) 369 K (c) 393 K (d) 444 K

19. Ozone reacts with moist KI. Besides I₂, the products are (a) KIO₃ only (b) H₂O₂ and K₂O (c) KOH and O₂ (d) K₂O and H₂

20. The number of S=O bonds in pyrosulphuric acid is (a) 4 (b) 2 (c) 6 (d) 3

21. Water is a liquid but H₂S is a gas at room temperature because (a) H₂O has the higher molar mass (b) H₂O molecules are linked by hydrogen bonds (c) H₂S is ionic (d) H₂O is bent and H₂S is linear

22. The acid strength of Group 16 hydrides rises down the group mainly because (a) electronegativity of E rises (b) molar mass falls (c) hydrogen bonding grows (d) the E–H bond enthalpy falls

Level 3: Challenge

23. 1 L of O₂ at a fixed temperature and pressure is passed through an ozoniser. The volume falls by 40 mL. The volume of O₃ formed is (a) 80 mL (b) 40 mL (c) 120 mL (d) 60 mL

24. The average oxidation state of S in thiosulphuric acid, H₂S₂O₃, is (a) +4 (b) +6 (c) +2 (d) +3

25. In which pair do both acids contain a sulphur–sulphur bond? (a) H₂SO₅, H₂S₂O₈ (b) H₂S₂O₃, H₂S₂O₆ (c) H₂S₂O₇, H₂SO₄ (d) H₂SO₃, H₂S₂O₇

26. The O–O bond order in ozone is (a) 1 (b) 2 (c) 2.5 (d) 1.5

27. Which statement is INCORRECT? (a) O₂ is diamagnetic (b) S₂ in the vapour phase is paramagnetic (c) O₃ is diamagnetic (d) Rhombic and monoclinic sulphur both contain S₈ rings

28. Element X of Group 16 forms XF₆. Its dioxide is a solid that acts as an oxidising agent, and its hydride is more acidic than H₂S but less acidic than H₂Te. X is (a) S (b) Te (c) Se (d) O

29. Assertion (A): Oxygen shows a greater tendency for catenation than sulphur. Reason (R): The S–S single bond is stronger than the O–O single bond. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Oxygen can show the +6 oxidation state. Statement II: H₂S is a stronger acid than H₂Te. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1dRhombic S is stable below 369 K.
2bCentral O has a lone pair; angle about 117°.
3aWeakest E–H bond releases H⁺ most easily.
4c2(+1) + x + 4(−2) = 0.
5bPolonium is radioactive.
6dS: −200 kJ/mol; O is less negative due to small size.
7cBoth rhombic and monoclinic forms have S₈ rings.
8aHydrogen bonding; boils at 373 K.
9dO₃ absorbs harmful UV radiation.
10bO is second most electronegative, so mainly −2.
11c104.5° > 92° > 91° > 90°.
12aE–H bond weakens; ΔfH turns positive.
13dH₂S₂O₈ has S–O–O–S.
14bPeroxide O atoms are −1, so S = +6.
15aResonance makes both bonds equal.
16cO has no d orbitals, so it cannot expand its octet to hold four F atoms.
17dS(IV) goes to the more stable S(VI).
18bRhombic ⇌ monoclinic at about 369 K.
19c2KI + H₂O + O₃ → 2KOH + I₂ + O₂.
20aEach S has two S=O.
21bH₂S has negligible hydrogen bonding.
22dLonger, weaker bond releases H⁺ more easily.
23aO₃ formed = 2 × contraction = 80 mL.
24c2(+1) + 2x + 3(−2) = 0 gives x = +2.
25bS=S in thiosulphuric; S–S in dithionic.
26dAverage of one single and one double bond.
27aO₂ has two unpaired electrons, so it is paramagnetic.
28cSe fits the acidity position and forms SeF₆.
29dO–O bond is weakened by lone pair repulsion, so S catenates more.
30bO never shows +6; H₂Te is the stronger acid.

Chapter 5 revision sheet

One-page summary

  • Group 16 (chalcogens): O, S, Se, Te, Po (and Lv). Valence configuration ns² np⁴.

  • O and S are non-metals, Se and Te metalloids, Po a radioactive metal.

  • First ionisation enthalpy is lower than in Group 15 (N > O, P > S): removing a paired p electron is easier.

  • Electron gain enthalpy: S is the most negative in the group; O is less negative because its compact 2p shell repels the incoming electron.

  • Oxidation states: −2, +2, +4, +6. Down the group +4 becomes more stable and +6 less stable. O is mostly −2 (+2 in OF₂, −1 in peroxides).

  • Hydrides H₂E: acid strength rises H₂O < H₂S < H₂Se < H₂Te; thermal stability falls; reducing power rises.

  • Boiling points: H₂S < H₂Se < H₂Te < H₂O (H₂O raised by hydrogen bonding).

  • Bond angles: H₂O 104.5°, H₂S 92°, H₂Se 91°, H₂Te 90°.

  • Oxygen anomaly: small size, high electronegativity, hydrogen bonding, no d orbitals, O₂ is paramagnetic.

  • Sulphur: rhombic (α) is stable below 369 K, monoclinic (β) above; both are S₈ crown rings. S₂ vapour is paramagnetic.

  • Ozone: bent, angle about 117°, both O–O bonds 128 pm (resonance, bond order 1.5); made from O₂ by silent electric discharge; endothermic; strong oxidiser.

  • Ozone reactions: PbS + 4O₃ → PbSO₄ + 4O₂; 2I⁻ + H₂O + O₃ → 2OH⁻ + I₂ + O₂.

  • Contact process: 2SO₂ + O₂ ⇌ 2SO₃ (V₂O₅, about 720 K, 2 bar, exothermic); SO₃ is absorbed in conc. H₂SO₄ to give oleum H₂S₂O₇, which is then diluted.

  • In peroxo acids, O–O oxygens count as −1, so S stays +6 in H₂SO₅ and H₂S₂O₈.

Must-remember table

OxoacidFormulaOxidation state of SSpecial link
SulphurousH₂SO₃+4None
SulphuricH₂SO₄+6None
ThiosulphuricH₂S₂O₃+2 (average)S replaces one O of H₂SO₄
DithionicH₂S₂O₆+5S–S
Pyrosulphuric (oleum)H₂S₂O₇+6S–O–S
PeroxomonosulphuricH₂SO₅+6O–O
PeroxodisulphuricH₂S₂O₈+6O–O

Memory aids

  • "Oleum Opens an Oxygen bridge": H₂S₂O₇ has one S–O–S link.

  • "Peroxo means O–O, and S stays six": count each peroxo O as −1 and you get +6 for S.

  • Hydride boiling points, "S, Se, Te climb; water tops them all": H₂S < H₂Se < H₂Te < H₂O.

  • Ozone "1.5 at 117": bond order 1.5, bond angle about 117°.

Concept connections

  • Resonance in O₃ and the paramagnetism of O₂ (MO theory) are in Chemistry Book 3: Chemical Bonding and Molecular Structure.

  • Conditions of the contact process follow Le Chatelier's principle from Chemistry Book 6: Equilibrium.

  • The ozone layer and its depletion are covered in Biology Book 10: Ecology and Environment.

Practice MCQs: Chapter 5, Level 4 (new NEET pattern)

31. Match List I (oxoacid) with List II (oxidation state of S).

List I

  • A. H₂SO₃

  • B. H₂S₂O₃

  • C. H₂S₂O₆

  • D. H₂SO₅

List II

  • i. +5

  • ii. +4

  • iii. +6

  • iv. +2 (average)

(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-iv, C-i, D-iii (c) A-ii, B-i, C-iv, D-iii (d) A-iii, B-iv, C-i, D-ii

32. Match List I (oxoacid) with List II (link present).

List I

  • A. H₂S₂O₇

  • B. H₂S₂O₈

  • C. H₂S₂O₆

  • D. H₂SO₄

List II

  • i. S–S bond

  • ii. No S–S, S–O–S or O–O link

  • iii. S–O–S bridge

  • iv. O–O (peroxo) link

(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-i, B-iv, C-iii, D-ii

33. Match List I (hydride) with List II (H–E–H bond angle).

List I

  • A. H₂O

  • B. H₂S

  • C. H₂Se

  • D. H₂Te

List II

  • i. 90°

  • ii. 104.5°

  • iii. 91°

  • iv. 92°

(a) A-ii, B-iv, C-iii, D-i (b) A-ii, B-iii, C-iv, D-i (c) A-iv, B-ii, C-iii, D-i (d) A-i, B-iv, C-iii, D-ii

34. Match List I (reaction) with List II (main product).

List I

  • A. PbS + O₃

  • B. KI(aq) + O₃

  • C. SO₂ + O₂ (V₂O₅, 720 K)

  • D. SO₃ + conc. H₂SO₄

List II

  • i. Oleum

  • ii. I₂ (with KOH)

  • iii. SO₃

  • iv. PbSO₄

(a) A-ii, B-iv, C-iii, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-iv, B-ii, C-i, D-iii (d) A-iv, B-ii, C-iii, D-i

35. How many of the following statements about ozone are correct?

  • A. Both O–O bonds in O₃ have the same length.

  • B. O₃ is a linear molecule.

  • C. Formation of O₃ from O₂ is endothermic.

  • D. O₃ is a stronger oxidising agent than O₂.

  • E. The O–O bond order in O₃ is 1.5.

(a) 3 (b) 5 (c) 2 (d) 4

36. Choose the correct set of statements.

  • A. The electron gain enthalpy of O is less negative than that of S.

  • B. H₂O is a liquid but H₂S is a gas at room temperature, because of hydrogen bonding in water.

  • C. Oxygen commonly shows +4 and +6 oxidation states.

  • D. O₂ is paramagnetic.

(a) A, B and D only (b) A and C only (c) B, C and D only (d) A, B, C and D

37. Choose the correct set of statements about sulphur.

  • A. Rhombic sulphur is the stable form below about 369 K.

  • B. Both rhombic and monoclinic sulphur contain S₈ rings.

  • C. Monoclinic sulphur is the stable form at room temperature.

  • D. At high temperature, sulphur vapour contains paramagnetic S₂.

(a) A and C only (b) B, C and D only (c) A, B and D only (d) A and D only

38. How many of the following species contain at least one oxygen–oxygen bond?

H₂SO₅, H₂S₂O₈, H₂S₂O₇, H₂O₂, O₃, H₂S₂O₆

(a) 3 (b) 4 (c) 5 (d) 2

39. First acid dissociation constants of the Group 16 hydrides are given.

HydrideH₂OH₂SH₂SeH₂Te
Ka₁1.8 × 10⁻¹⁶1.3 × 10⁻⁷1.3 × 10⁻⁴2.3 × 10⁻³

The trend is best explained by (a) the fall in H–E bond enthalpy down the group (b) the rise in electronegativity of E down the group (c) stronger hydrogen bonding in H₂Te (d) the fall in the size of E down the group

40. A graph of boiling point (y-axis) against period (x-axis) for H₂O, H₂S, H₂Se and H₂Te shows 373 K, 213 K, 232 K and 269 K. Which reading of the graph is correct? (a) Boiling point rises steadily from H₂O to H₂Te (b) H₂S has the highest boiling point (c) H₂Te has the lowest boiling point (d) H₂O is unusually high due to hydrogen bonding, and H₂S is the lowest

41. 100 mL of O₂ is passed through an ozoniser, and 15% of the O₂ by volume is converted to O₃. The final volume of the gas at the same temperature and pressure is (a) 90 mL (b) 85 mL (c) 95 mL (d) 92.5 mL

Read this for Q42 and Q43. An acid plant near Vadodara burns sulphur to SO₂ and oxidises it with air over V₂O₅ at about 720 K and 2 bar. The SO₃ formed is passed into 98% H₂SO₄, not into water. The thick fuming liquid is later diluted to the required strength.

42. Why is SO₃ absorbed in concentrated H₂SO₄ instead of water? (a) SO₃ is insoluble in water (b) Its direct reaction with water releases much heat and forms an acid mist that is hard to condense (c) Water would reduce SO₃ back to SO₂ (d) H₂SO₄ catalyses the oxidation of SO₂

43. In the fuming liquid (oleum), the oxidation state of S and the key link are (a) +7 and O–O (b) +6 and S–S (c) +4 and S–O–S (d) +6 and S–O–S

44. Which order is correct? (a) Acid strength: H₂O < H₂S < H₂Se < H₂Te (b) Thermal stability: H₂Te > H₂Se > H₂S (c) Reducing power: H₂O > H₂S (d) Boiling point: H₂O < H₂S

45. Which statement is correct? (a) The +6 state becomes more stable down Group 16 (b) SF₆ is readily hydrolysed by water (c) SO₂ can act as both an oxidising and a reducing agent, while SO₃ acts only as an oxidising agent (d) Oxygen shows +6 in OF₆

Level 4 answer key

QAnsReason
31b+4, +2 (average), +5, +6
32cOleum S–O–S; peroxodisulphuric O–O; dithionic S–S; H₂SO₄ none
33a104.5°, 92°, 91°, 90°
34dPbSO₄, I₂, SO₃, oleum
35dA, C, D, E true; O₃ is bent
36aO is mostly −2; it has no d orbitals to reach +4 or +6
37cRhombic, not monoclinic, is stable at room temperature
38bH₂SO₅, H₂S₂O₈, H₂O₂ and O₃
39aWeaker H–E bond releases H⁺ more easily
40d373 K for H₂O (H-bonding); 213 K for H₂S is the minimum
41c15 mL O₂ → 10 mL O₃; 85 + 10 = 95 mL
42bSO₃ + H₂O is violently exothermic and forms a mist
43dH₂S₂O₇: S +6, one S–O–S bridge
44aH–E bond weakens down the group
45cS(+4) can go up or down; S(+6) can only go down
22 min left
‹
›