Chapter 10 of 11 · 8 min read

Unit Test: p-Block Elements

Time: 50 minutes. Marking: +4 for a correct answer, −1 for a wrong answer, 0 if left blank. The questions mix all seven chapters. Data where needed: B = 10.8, H = 1, O = 16, I = 127 g/mol; molar volume at STP = 22.4 L.

1. Which p-block element has the highest first ionisation enthalpy? (a) F (b) He (c) Ne (d) N

2. The inert pair effect explains (a) the high stability of Al³⁺ (b) the catenation of silicon (c) the acidic nature of B₂O₃ (d) the greater stability of Pb²⁺ over Pb⁴⁺

3. Which molecule is electron-deficient? (a) B₂H₆ (b) CH₄ (c) NH₃ (d) SiH₄

4. The hybridisation of the central atom in BF₃, NH₃ and XeF₄ is respectively (a) sp³, sp², sp³d² (b) sp², sp², sp³d (c) sp², sp³, sp³d² (d) sp², sp³, sp³d

5. In which allotrope of carbon is the C–C distance 154 pm? (a) graphite (b) C₆₀ (c) graphene (d) diamond

6. Which oxoacid of phosphorus is tribasic? (a) H₃PO₃ (b) H₃PO₄ (c) H₃PO₂ (d) H₄P₂O₇

7. Which Group 16 hydride has the lowest boiling point? (a) H₂S (b) H₂O (c) H₂Se (d) H₂Te

8. The shape of SF₄ is (a) tetrahedral (b) square planar (c) see-saw (d) octahedral

9. In which interhalogen is the central atom sp³d² hybridised? (a) ClF₃ (b) IF₇ (c) IF₅ (d) ICl

10. Which oxide is amphoteric? (a) CO (b) SiO₂ (c) P₄O₁₀ (d) Ga₂O₃

11. The strongest Lewis acid among the boron trihalides is (a) BI₃ (b) BBr₃ (c) BCl₃ (d) BF₃

12. Which Group 13 element forms the most stable +1 ion? (a) Al (b) Tl (c) Ga (d) B

13. Which statement about carbon allotropes is FALSE? (a) Graphite is the most stable form at 298 K (b) Diamond does not conduct electricity (c) C₆₀ has 60 carbon atoms at the corners of a closed cage (d) The layers of graphite are 141.5 pm apart

14. Which gas is released when aluminium dissolves in aqueous NaOH? (a) O₂ (b) H₂ (c) Cl₂ (d) N₂

15. The number of S–OH groups in peroxodisulphuric acid, H₂S₂O₈, is (a) 4 (b) 1 (c) 2 (d) 0

16. Which hydride has the largest H–E–H bond angle? (a) NH₃ (b) PH₃ (c) H₂S (d) H₂Se

17. The number of P=O bonds in cyclic trimetaphosphoric acid, (HPO₃)₃, is (a) 6 (b) 3 (c) 0 (d) 9

18. The correct order of the magnitude of electron gain enthalpy is (a) F > Cl > Br > I (b) I > Br > Cl > F (c) Br > Cl > F > I (d) Cl > F > Br > I

19. Which xenon compound is square planar? (a) XeF₂ (b) XeF₆ (c) XeF₄ (d) XeO₃

20. Which species cannot act as a reducing agent? (a) H₃PO₄ (b) H₃PO₃ (c) SO₂ (d) SnCl₂

21. Which chloride is NOT hydrolysed by water under ordinary conditions? (a) SiCl₄ (b) PCl₃ (c) BCl₃ (d) CCl₄

22. 5.52 g of B₂H₆ burns completely in oxygen. The mass of B₂O₃ formed is (a) 6.96 g (b) 13.92 g (c) 27.84 g (d) 3.48 g

23. Which oxide of nitrogen is paramagnetic? (a) NO₂ (b) N₂O (c) N₂O₄ (d) N₂O₅

24. Which oxide is the most acidic? (a) Na₂O (b) MgO (c) Cl₂O₇ (d) Al₂O₃

25. Which of these elements shows the strongest tendency to catenate? (a) N (b) S (c) O (d) Cl

26. Which acid contains phosphorus in the +5 state and a P–O–P bridge? (a) H₃PO₄ (b) H₄P₂O₆ (c) H₃PO₃ (d) H₄P₂O₇

27. The correct order of thermal stability of hydrogen halides is (a) HI > HBr > HCl > HF (b) HCl > HF > HBr > HI (c) HF > HCl > HBr > HI (d) HBr > HCl > HF > HI

28. Which is NOT a feature of the first member of a p-block group? (a) It forms pentavalent compounds such as NCl₅ (b) Its maximum covalency is 4 (c) It forms pπ–pπ multiple bonds (d) It is highly electronegative

29. Which statement about XeO₃ is correct? (a) It is planar with sp² xenon (b) Xenon is in the +3 state (c) It is tetrahedral (d) It is pyramidal with one lone pair on xenon

30. A greenish-yellow gas X turns moist starch–iodide paper blue and bleaches litmus in the presence of moisture. X is (a) F₂ (b) Cl₂ (c) Br₂ (d) I₂

31. The numbers of 2-centre 2-electron and 3-centre 2-electron bonds in diborane are (a) 4 and 2 (b) 6 and 0 (c) 2 and 4 (d) 4 and 4

32. The covalency of Al in Al₂Cl₆ and of B in [BF₄]⁻ are respectively (a) 3 and 4 (b) 6 and 4 (c) 4 and 4 (d) 4 and 3

33. In which oxoacid is sulphur in the +4 state? (a) H₂SO₄ (b) H₂SO₃ (c) H₂S₂O₇ (d) H₂S₂O₈

34. 0.05 mol of O₃ reacts with excess moist KI (2KI + H₂O + O₃ → 2KOH + I₂ + O₂). The mass of iodine liberated is (a) 25.4 g (b) 6.35 g (c) 38.1 g (d) 12.7 g

35. The correct order of basicity is (a) H₃PO₂ < H₃PO₃ < H₃PO₄ (b) H₃PO₄ < H₃PO₃ < H₃PO₂ (c) H₃PO₃ < H₃PO₂ < H₃PO₄ (d) all three are tribasic

36. Which noble gas has the highest boiling point? (a) He (b) Ar (c) Rn (d) Kr

37. In which molecule does the central atom carry exactly two lone pairs? (a) XeF₂ (b) SF₄ (c) BrF₅ (d) ClF₃

38. Which species has the same shape as [BF₄]⁻? (a) XeF₄ (b) ClO₄⁻ (c) SF₄ (d) [ICl₄]⁻

39. Which reaction is a disproportionation? (a) Cl₂ + 2KBr → 2KCl + Br₂ (b) SiCl₄ + 4H₂O → Si(OH)₄ + 4HCl (c) Cl₂ + 2NaOH → NaCl + NaOCl + H₂O (d) XeF₆ + 3H₂O → XeO₃ + 6HF

40. The correct order of first ionisation enthalpy is (a) F > N > O (b) O > N > F (c) N > O > F (d) F > O > N

41. The anhydride of nitric acid is (a) N₂O₃ (b) N₂O₅ (c) NO₂ (d) N₂O

42. SnCl₄ is a covalent liquid while SnCl₂ is an ionic solid. The best reason is (a) Sn⁴⁺ is larger than Sn²⁺ (b) SnCl₂ has more covalent bonds (c) the inert pair effect makes Sn⁴⁺ unstable (d) the smaller, more highly charged Sn⁴⁺ polarises Cl⁻ more strongly

43. Assertion (A): PCl₅ exists but NCl₅ does not. Reason (R): Nitrogen has no vacant d orbitals in its valence shell. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

44. Assertion (A): Graphite is thermodynamically more stable than diamond at 298 K. Reason (R): Graphite has a higher density than diamond. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

45. Statement I: Boric acid is a tribasic protonic acid. Statement II: In diborane, the bridging B–H bonds are longer than the terminal B–H bonds. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bHe: 2372 kJ/mol, the highest of all elements.
2d6s² pair stays out of bonding in lead.
3a12 valence electrons for 8 links; 3c–2e bonds needed.
4c3 bp; 3 bp + 1 lp; 4 bp + 2 lp.
5dsp³ single bonds in diamond.
6bThree P–OH groups.
7aNo hydrogen bonding and smallest size after H₂O.
8c4 bp + 1 lp, sp³d.
9cIF₅: 5 bp + 1 lp.
10dGa₂O₃ reacts with acids and bases.
11aWeakest back bonding with large I.
12bInert pair effect is strongest for Tl.
13d141.5 pm is in-plane; layers are 340 pm apart.
14b2Al + 2NaOH + 6H₂O → 2Na[Al(OH)₄] + 3H₂.
15cOne S–OH on each S atom.
16aNH₃ is 107.8°; others are near 90–94°.
17bOne P=O per PO₄ unit.
18d349 > 333 > 325 > 296 kJ/mol.
19c4 bp + 2 trans lp.
20aP is in its highest state (+5) and has no P–H bond.
21dC has no d orbitals to accept water's lone pair.
22b0.2 mol B₂H₆ → 0.2 mol B₂O₃ × 69.6 g/mol.
23aNO₂ has an odd electron.
24cHighest oxidation state of a non-metal.
25bS–S bonds form S₈ rings and chains.
26dPyrophosphoric acid, P = +5.
27cH–X bond enthalpy falls from HF to HI.
28aNo d orbitals, so covalency cannot exceed 4.
29d3 bp + 1 lp, sp³.
30bCl₂ oxidises I⁻; forms HOCl that bleaches.
31aFour terminal and two bridging bonds.
32cEach Al bonds to four Cl; B to four F.
33b2(+1) + x + 3(−2) = 0 gives +4.
34d0.05 mol I₂ × 254 g/mol = 12.7 g.
35aBasicity 1, 2, 3.
36cLargest atom, strongest dispersion forces (211 K).
37dClF₃: 3 bp + 2 lp.
38bBoth tetrahedral, 4 bp and no lp.
39cCl goes from 0 to −1 and +1.
40a1680 > 1402 > 1314 kJ/mol.
41bN₂O₅ + H₂O → 2HNO₃.
42dFajans' rules: high charge, small cation means more covalent.
43aWithout d orbitals N cannot expand its octet.
44cDiamond (3.51 g/cm³) is denser than graphite (2.26 g/cm³).
45dBoric acid is a monobasic Lewis acid; bridge bonds are longer.
8 min left
‹
›