Chapter 2 of 11 · 5 min read

Exam Strategy

The p-block usually gives about 2 to 4 direct NEET questions, and it also feeds bonding, periodicity and coordination questions, so a strong grip here pays twice. Study it as trends plus a short list of exceptions, then drill structures (oxoacids, xenon fluorides, interhalogens) until you can draw them from memory.

Chapter weightage and priority

ChapterTypical NEET questionsPriorityWhy
1. General introduction and trends0–1MediumInert pair effect and first-element anomaly appear inside group questions too
2. Group 13 (boron family)0–1MediumLewis acidity of BX₃, boric acid, diborane structure
3. Group 14 (carbon family)0–1MediumAllotropes, CO vs CO₂, +2/+4 stability, SiCl₄ hydrolysis
4. Group 15 (nitrogen family)1–2HighOxoacids of phosphorus, hydride trends, N anomaly
5. Group 16 (oxygen family)0–1HighOxoacids of sulphur, ozone, hydride trends
6. Group 17 (halogens)1–2HighOxidising power, HX acidity, oxoacid strength, interhalogen shapes
7. Group 18 (noble gases)0–1HighShapes and hybridisation of xenon fluorides and oxides

Weightage is approximate, based on recent papers; NEET can ask from any part of the syllabus.

High-yield topics

  • Inert pair effect: order of stability of lower oxidation state (Tl⁺, Pb²⁺, Bi³⁺) and which compounds are oxidising (PbO₂, Tl³⁺, NaBiO₃).

  • Anomalous first element: why NCl₅, OF₄ and [BF₆]³⁻ do not exist; maximum covalency 4; pπ–pπ multiple bonds.

  • Lewis acidity of boron halides: BF₃ < BCl₃ < BBr₃ < BI₃ and the back-bonding reason.

  • Boric acid and diborane: monobasic Lewis acid; 3c–2e banana bonds, count of terminal and bridging H.

  • Allotropes of carbon: hybridisation and bonding in diamond, graphite and C₆₀; why graphite conducts.

  • Hydride trends (Groups 15–17): boiling point order with the first-member anomaly, thermal stability, acid strength, reducing power, bond angle.

  • Oxoacids of phosphorus: P–OH count gives basicity; P–H bonds give reducing power; oxidation state of P.

  • Oxoacids of sulphur: S–O–S, S–S and O–O links; oxidation state of S in each.

  • Halogen trends: oxidising power F₂ > Cl₂ > Br₂ > I₂, electron gain enthalpy (Cl most negative), bond energy order Cl₂ > Br₂ > F₂ > I₂.

  • Oxoacids of chlorine: acid strength and oxidising power run in opposite directions.

  • Interhalogens and xenon compounds: VSEPR shapes (T-shape, square pyramidal, pentagonal bipyramidal, linear, square planar, distorted octahedral).

  • Ozone: bond order 1.5, resonance, bent shape, oxidising reactions.

Question types to expect

TypeWhat it looks likeHow to approach
NumericalVolume of gas from Al + NaOH, O₂ → O₃ contraction, moles of HF from XeF₆ hydrolysisWrite the balanced equation first, then mole ratio, then 22.4 L at STP only if stated
Conceptual"Which hydride has the lowest boiling point?"Recall the trend, then check the first member for H-bonding
Statement-basedFour or five statements on trends, count the correct onesMark each T or F in the margin; never judge the set as a whole
Match the columnSpecies ↔ shape, oxoacid ↔ basicity, element ↔ propertyFix the one pair you are surest of, then eliminate options
Assertion–ReasonA: NCl₅ does not exist; R: N has no d orbitalsTest A, test R, then ask "does R answer why A?"
Graph or diagramBoiling point vs period, radius vs atomic number, a drawn structureLook for the odd point; it is almost always the first member or Ga

Study plan

DayWhat to studyPractice target
1Chapter 1: configurations, trends, inert pair effect, first-element anomalyChapter 1 Levels 1–2 (22 MCQs)
2Chapter 2 (Group 13) and Chapter 3 (Group 14) theoryLevels 1–2 of both chapters
3Chapter 4 (Group 15): hydrides, oxoacids of P, structuresChapter 4 all levels + Level 4
4Chapter 5 (Group 16): ozone, oxoacids of S, hydridesChapter 5 all levels + Level 4
5Chapter 6 (Group 17): halogens, HX, oxoacids, interhalogensChapter 6 all levels + Level 4
6Chapter 7 (Group 18) plus Level 3 and Level 4 of Chapters 1–3Draw every xenon and interhalogen shape from memory
7Unit Test (50 min), then revise wrong answersScore check; redo every wrong question next morning

Last 48 hours:

  1. Day −2: read every revision sheet and the Book-at-a-glance sheet; redraw all oxoacid structures.

  2. Day −1 morning: Mock Test 2 in 35 minutes; check every wrong option against the rapid-fire facts.

  3. Day −1 evening: only the Common mistakes checklist and memory aids; no new material.

Time-saving tricks

  • Steric number shortcut: for a central atom with only monovalent atoms around it, steric number = (valence electrons of central atom + number of monovalent atoms ± charge) ÷ 2. XeF₄: (8 + 4) ÷ 2 = 6, so octahedral arrangement, square planar shape.

  • Basicity of P oxoacids: count only P–OH groups. H₃PO₂ is monobasic, H₃PO₃ dibasic, H₃PO₄ tribasic. Any P–H bond means a reducing agent.

  • Inert pair rule of thumb: the bottom element of Groups 13–15 prefers (group oxidation state − 2). So its higher-state compound is an oxidiser (PbO₂, Tl³⁺, NaBiO₃); the lighter element's lower state is a reducer (SnCl₂).

  • First-member anomaly in hydride boiling points: in Groups 15, 16 and 17 the lightest hydride (NH₃, H₂O, HF) jumps up because of hydrogen bonding; the rest rise with size. The lowest boiling hydride is the second member (PH₃, H₂S, HCl).

  • Oxoacid strength: same element, more O → stronger acid (HClO₄ strongest). Same formula type, more electronegative central atom → stronger (HOCl > HOBr > HOI).

  • First element cannot exceed covalency 4: eliminate any option containing NCl₅, NF₅, OF₄, [BF₆]³⁻ or [CF₆]²⁻.

  • Two halogen "surprises" to remember: chlorine (not fluorine) has the most negative electron gain enthalpy; F₂ has a lower bond energy than Cl₂ and Br₂.

  • Back-bonding check: smaller halogen means better p–p overlap with boron, so BF₃ is the weakest Lewis acid of the boron halides.

5 min left
‹
›