Chapter 11 of 11 · 13 min read

Last-Week Revision Kit

Use this kit in the final week: one read of the glance sheet each morning, the rapid-fire facts at night, and Mock Test 2 once under exam timing.

Book-at-a-glance sheet

Chapters 1–2: Alkanes, conformations, halogenation

ItemKey fact or formula
General formulaCₙH₂ₙ₊₂; sp³; C–C 154 pm
Wurtz / KolbeR–R; even carbons; no methane
DecarboxylationRCOONa + NaOH/CaO → R–H (one C fewer)
Combustion O₂(3n + 1)/2 mol per mol alkane
Boiling pointRises with chain length, falls with branching
Ethane conformersStaggered 60° most stable; barrier about 12.5 kJ/mol
Butane stabilityanti > gauche > partially eclipsed > fully eclipsed
HalogenationFree radical; 3° > 2° > 1° H; Cl 5.0 : 3.8 : 1, Br about 1600 : 82 : 1

Chapters 3–4: Alkenes

ItemKey fact or formula
StructureC=C = σ + π; sp²; 134 pm; planar
Geometrical isomerismTwo different groups on each C=C carbon
cis vs transcis higher dipole and bp; trans higher mp and stability
PreparationLindlar → cis; Na/NH₃ → trans; alc. KOH (Saytzeff); Zn on vicinal dihalide; conc. H₂SO₄ on alcohols
HX additionMarkovnikov via carbocation; HI > HBr > HCl; shifts possible
Peroxide effectHBr only; free radical; anti-Markovnikov
OxidationBaeyer's → diol; hot KMnO₄ cleaves (=CH₂ → CO₂)
OzonolysisC=C → two C=O (O₃, then Zn/H₂O)

Chapter 5: Alkynes

ItemKey fact or formula
StructureC≡C = σ + 2π; sp; 180°; 120 pm
PreparationCaC₂ + 2H₂O; vicinal dihalide + alc. KOH, then NaNH₂
AcidityH₂O > HC≡CH > NH₃ > C₂H₄ > C₂H₆; pKa of ethyne about 25
TestsAmmoniacal AgNO₃ white ppt; ammoniacal Cu₂Cl₂ red-brown ppt (terminal only)
HydrationHg²⁺/H⁺: ethyne → ethanal; others → ketones
Cyclic polymerisation3 ethyne → benzene; 3 propyne → mesitylene (873 K, Fe tube)

Chapters 6–7: Benzene and electrophilic substitution

ItemKey fact or formula
BenzenePlanar; all C–C 139 pm; 12 σ + 3 π bonds
Resonance energy3(120) − 208 ≈ 150 kJ/mol
HückelCyclic, planar, fully conjugated, (4n + 2) π
EAS stepsMake E⁺ → σ-complex (slow) → lose H⁺ (fast)
ElectrophilesCl⁺, NO₂⁺, SO₃, R⁺, RCO⁺
Directorso/p: –OH, –NH₂, –OCH₃, alkyl, halogens; m: –NO₂, –CN, –CHO, –COOH, –SO₃H
Friedel–Crafts limitsAlkylation: polyalkylation, rearrangement; fails on nitrobenzene and aniline

40 rapid-fire facts

  1. Alkanes, alkenes and alkynes follow CₙH₂ₙ₊₂, CₙH₂ₙ and CₙH₂ₙ₋₂.

  2. Cycloalkanes have the same general formula as alkenes.

  3. C–C, C=C and C≡C lengths are about 154, 134 and 120 pm.

  4. Methane cannot be made by Wurtz reaction or Kolbe electrolysis.

  5. Sodium ethanoate heated with soda lime gives methane.

  6. In Kolbe electrolysis, H₂ is released at the cathode and the solution becomes alkaline.

  7. Among C₅H₁₂ isomers, n-pentane boils highest and neopentane melts highest.

  8. Alkanes are insoluble in water and float on it.

  9. KMnO₄ oxidises the 3° C–H of 2-methylpropane to 2-methylpropan-2-ol.

  10. n-Hexane aromatises to benzene over Cr₂O₃ or V₂O₅ on Al₂O₃ at 773 K.

  11. Staggered ethane has a dihedral angle of 60°; eclipsed has 0°.

  12. Ethane's rotation barrier is about 12.5 kJ/mol, so conformers cannot be isolated.

  13. Free-radical chlorination is started by light or heat and slowed by O₂.

  14. Fluorination of alkanes is violent; iodination is reversible.

  15. Bromination is far more selective than chlorination for 3° hydrogen.

  16. The π bond is weaker than the σ bond in a double bond.

  17. Lindlar's catalyst is Pd on BaSO₄ or CaCO₃ poisoned with quinoline or sulphur compounds.

  18. Na in liquid NH₃ reduces internal alkynes to trans-alkenes.

  19. Ethanol dehydrates to ethene with conc. H₂SO₄ at about 443 K.

  20. 3° alcohols dehydrate most easily.

  21. Alcoholic KOH favours elimination; aqueous KOH favours substitution.

  22. The more substituted alkene is more stable and has the smaller heat of hydrogenation.

  23. trans-But-2-ene is more stable than cis-but-2-ene.

  24. Bromine adds to alkenes through a cyclic bromonium ion.

  25. Only HBr shows the peroxide effect.

  26. In the peroxide effect, Br· adds first to give the more stable carbon radical.

  27. Baeyer's reagent is cold, dilute, alkaline KMnO₄ and gives a vicinal diol.

  28. Zn dust in ozonolysis stops H₂O₂ from oxidising aldehydes.

  29. PVC is made from vinyl chloride; Teflon from tetrafluoroethene.

  30. Ethyne is made from calcium carbide and water.

  31. Terminal alkynes give a white precipitate with ammoniacal AgNO₃.

  32. Acetylide ions are stronger bases than hydroxide ions.

  33. Hydration of propyne gives propanone through an enol.

  34. Three propyne molecules give 1,3,5-trimethylbenzene at 873 K.

  35. All six C–C bonds in benzene are 139 pm long.

  36. Benzene's resonance energy is about 150 kJ/mol.

  37. Cyclooctatetraene is tub-shaped and non-aromatic.

  38. The tropylium cation and cyclopentadienyl anion each have 6 π electrons and are aromatic.

  39. Formation of the σ-complex is the rate-determining step of EAS.

  40. Friedel–Crafts acylation never rearranges and stops after one acyl group.

Common mistakes checklist

  • I can predict both Markovnikov and peroxide products of HBr with any alkene.

  • I don't confuse HBr (shows peroxide effect) with HCl and HI (do not).

  • I check for a hydride or methyl shift whenever a 2° carbocation sits next to a 3° or 4° carbon.

  • I don't confuse Lindlar (cis) with Na/liquid NH₃ (trans).

  • I can work ozonolysis backwards from carbonyl products to the alkene.

  • I don't confuse ethyne hydration (aldehyde) with other alkynes (ketones).

  • I can arrange water, ethyne, ammonia, ethene and ethane by acidity.

  • I check planarity before calling a 4n + 2 π system aromatic.

  • I don't confuse halogens' directing effect (o/p) with their effect on rate (deactivating).

  • I remember that Friedel–Crafts fails on nitrobenzene and that soda lime removes one carbon.

Mock Test 2: New-pattern paper

30 questions · Time: 35 minutes · Marking: +4 for correct, −1 for wrong, 0 for unattempted. Use 22.4 L/mol at STP.

1. Match the test (List I) with the observation (List II).

List I

  • A. Br₂ in CCl₄ added to cyclohexene

  • B. Baeyer's reagent added to propene

  • C. Ammoniacal AgNO₃ added to ethyne

  • D. Br₂ in CCl₄ added to benzene in the dark, no catalyst

List II

  • (i) No visible change

  • (ii) White precipitate

  • (iii) Purple colour fades and a brown solid forms

  • (iv) Red-brown colour fades

(a) A-iv, B-ii, C-iii, D-i (b) A-iii, B-iv, C-ii, D-i (c) A-iv, B-iii, C-ii, D-i (d) A-iv, B-iii, C-i, D-ii

2. Match the molecule (List I) with its bond count (List II).

List I

  • A. Ethane

  • B. Ethene

  • C. Ethyne

  • D. Benzene

List II

  • (i) 3 σ, 2 π

  • (ii) 12 σ, 3 π

  • (iii) 7 σ, 0 π

  • (iv) 5 σ, 1 π

(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-i, C-iv, D-ii (d) A-iii, B-iv, C-ii, D-i

3. Match the rule or effect (List I) with its statement (List II).

List I

  • A. Markovnikov's rule

  • B. Saytzeff's rule

  • C. Kharasch (peroxide) effect

  • D. Hückel's rule

List II

  • (i) Anti-Markovnikov addition of HBr

  • (ii) (4n + 2) π electrons for aromaticity

  • (iii) The more substituted alkene is the major elimination product

  • (iv) The negative part of the reagent goes to the carbon with fewer hydrogens

(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-i, C-iii, D-ii (c) A-iv, B-iii, C-ii, D-i (d) A-iv, B-iii, C-i, D-ii

4. Match the conversion (List I) with the reagent (List II).

List I

  • A. CH₃CH₂Br → CH₂=CH₂

  • B. HC≡CH → CH₃CHO

  • C. C₆H₆ → C₆H₅COCH₃

  • D. CH₂=CH₂ → HOCH₂CH₂OH

List II

  • (i) Alcoholic KOH, heat

  • (ii) CH₃COCl, anhydrous AlCl₃

  • (iii) Cold, dilute, alkaline KMnO₄

  • (iv) Dilute H₂SO₄ with HgSO₄

(a) A-i, B-ii, C-iv, D-iii (b) A-i, B-iv, C-ii, D-iii (c) A-iv, B-i, C-ii, D-iii (d) A-i, B-iv, C-iii, D-ii

5. How many of the following statements are correct?

  • A. Propene has 8 σ bonds and 1 π bond.

  • B. But-1-ene shows geometrical isomerism.

  • C. Ethyne is more acidic than ethene.

  • D. The resonance energy of benzene is about 150 kJ/mol.

(a) 2 (b) 3 (c) 4 (d) 1

6. Choose the correct set of statements.

  • A. Wurtz reaction on a mixture of CH₃Br and C₂H₅Br gives three alkanes.

  • B. Kolbe electrolysis of sodium propanoate gives butane.

  • C. Sodium butanoate heated with soda lime gives butane.

  • D. 2,2-Dimethylpropane boils higher than n-pentane.

(a) A and B only (b) A, B and C only (c) C and D only (d) B and D only

7. How many of the following species are aromatic?

  • A. Benzene

  • B. Cyclopentadienyl anion

  • C. Cyclobutadiene

  • D. Tropylium cation

  • E. Cyclooctatetraene

  • F. Cyclopropenyl cation

  • G. Cyclopentadienyl cation

(a) 3 (b) 5 (c) 6 (d) 4

8. Choose the correct set of statements.

  • A. –NHCOCH₃ is an o/p-directing, activating group.

  • B. –CHO is a meta-directing group.

  • C. –CH₃ is a meta-directing group.

  • D. Phenol is brominated faster than benzene.

(a) A and B only (b) B and C only (c) A, B and D only (d) A, B, C and D

9. How many of the following statements about ethane are correct?

  • A. The eclipsed form has a dihedral angle of 0°.

  • B. The staggered form has the least torsional strain.

  • C. Staggered and eclipsed ethane can be isolated at room temperature.

(a) 1 (b) 2 (c) 3 (d) 0

10. A graph of potential energy of n-butane against the dihedral angle between the two CH₃ groups (0° to 360°) shows the highest peaks at 0° and 360°, lower peaks at 120° and 240°, shallow valleys at 60° and 300°, and the deepest valley at 180°. Which reading is correct? (a) The form at 0° is the anti conformation (b) The form at 60° is the most stable (c) The form at 180° is the anti conformation and the global energy minimum (d) The form at 120° is fully eclipsed

11. A table gives ozonolysis results (O₃, then Zn/H₂O). Alkene P: methanal + propanone. Alkene Q: ethanal only. Alkene R: ethanal + propanone. Alkene R is (a) 2-Methylbut-1-ene (b) Pent-2-ene (c) 3-Methylbut-1-ene (d) 2-Methylbut-2-ene

12. The volume of O₂ at STP needed to burn 2.6 g of ethyne completely is (a) 5.6 L (b) 2.8 L (c) 11.2 L (d) 4.48 L

For Q13–17, choose: (a) Both A and R are true and R explains A (b) Both A and R are true but R does not explain A (c) A is true but R is false (d) A is false but R is true.

13. Assertion (A): Ethyne reacts with sodium metal to form sodium acetylide. Reason (R): A hydrogen on an sp carbon is acidic because sp carbon has 50% s-character.

14. Assertion (A): HCl adds to propene in the presence of peroxide to give mainly 1-chloropropane. Reason (R): The H–Cl bond is too strong for the free-radical chain to run.

15. Assertion (A): trans-But-2-ene has a higher melting point than cis-but-2-ene. Reason (R): trans-But-2-ene has a higher dipole moment than cis-but-2-ene.

16. Assertion (A): Toluene is nitrated faster than benzene. Reason (R): The methyl group pushes electron density into the ring by +I effect and hyperconjugation.

17. Assertion (A): Chlorobenzene gives mainly o- and p-products in electrophilic substitution. Reason (R): Chlorine withdraws electrons from the ring by its –I effect.

Passage for Q18–19: An unknown hydrocarbon X (C₆H₁₀) takes up 2 mol of H₂ over Ni to give n-hexane. X gives no precipitate with ammoniacal AgNO₃. Warming X with dilute H₂SO₄ and HgSO₄ gives a single ketone, hexan-3-one.

18. X is (a) Hex-1-yne (b) Hexa-1,5-diene (c) Hex-3-yne (d) Cyclohexene

19. Reduction of X with Na in liquid NH₃ gives (a) cis-Hex-3-ene (b) trans-Hex-3-ene (c) Hexane (d) Hex-2-ene

Passage for Q20–21: A student treats benzene with CH₃Cl and anhydrous AlCl₃ to get compound A. She then nitrates A with a mixture of concentrated HNO₃ and H₂SO₄ to get B, which she separates from its isomer.

20. The para isomer B is (a) 3-Nitrotoluene (b) Nitrobenzene (c) 2,4,6-Trinitrotoluene (d) 4-Nitrotoluene

21. If she had nitrated benzene first and then used CH₃Cl/AlCl₃, the result would be (a) 3-nitrotoluene as the main product (b) 4-nitrotoluene as the main product (c) no Friedel–Crafts reaction, because nitrobenzene is too deactivated (d) 2-nitrotoluene as the main product

22. The number of structurally different monochloro products from 3-methylpentane is (a) 3 (b) 5 (c) 6 (d) 4

23. In chlorination of 2-methylpropane, the rate per H is 3° : 1° = 5 : 1. The percentage of 1-chloro-2-methylpropane formed is about (a) 64.3% (b) 35.7% (c) 90% (d) 50%

24. The degree of unsaturation (rings + π bonds) of styrene, C₈H₈, is (a) 4 (b) 5 (c) 6 (d) 3

25. But-2-yne is converted into cis-but-2-ene by (a) Na in liquid NH₃ (b) excess H₂ over Ni (c) LiAlH₄ (d) H₂ with Lindlar's catalyst

26. 2.1 g of propene reacts completely with HBr (no peroxide). The mass of 2-bromopropane formed (100% yield) is (a) 6.15 g (b) 4.10 g (c) 12.3 g (d) 3.08 g

27. Statement I: The three carbon atoms of propyne lie on one straight line. Statement II: Propyne has two sp carbons and one sp³ carbon. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

28. A bar chart shows heats of hydrogenation (kJ/mol): but-1-ene −127, cis-but-2-ene −120, trans-but-2-ene −116. The order of stability is (a) but-1-ene > cis > trans (b) trans-but-2-ene > cis-but-2-ene > but-1-ene (c) cis > trans > but-1-ene (d) all three are equally stable

29. Which compound gives only one ring-monobromo product with Br₂/FeBr₃? (a) Toluene (b) m-Xylene (c) p-Xylene (d) Ethylbenzene

30. The major product of HBr (no peroxide) with 3-methylbut-1-ene is (a) 2-Bromo-3-methylbutane (b) 1-Bromo-3-methylbutane (c) 2-Bromo-2-methylbutane (d) 1-Bromo-2-methylbutane

Mock Test 2 answer key

QAnsReason
1cAlkene decolourises Br₂ and Baeyer's reagent; terminal alkyne gives Ag acetylide; benzene does not add Br₂
2aCount every single bond as σ; each extra bond is π
3dMarkovnikov, Saytzeff, Kharasch, Hückel in turn
4bElimination; Hg²⁺ hydration; acylation; Baeyer's hydroxylation
5bA, C, D true; but-1-ene has two H on C-1
6aButanoate gives propane; branching lowers bp
7dBenzene, C₅H₅⁻, C₇H₇⁺, C₃H₃⁺
8c–CH₃ is o/p-directing
9bA and B true; the barrier is too small to isolate conformers
10cMethyls farthest apart at 180° (anti)
11d(CH₃)₂C=CHCH₃ gives propanone + ethanal
12a0.1 mol × 2.5 mol O₂ = 0.25 mol × 22.4 = 5.6 L
13aAcidic ≡C–H reacts with Na because of high s-character
14dHCl gives 2-chloropropane even with peroxide; R is true
15ctrans packs better; cis has the higher dipole moment
16aElectron donation activates the ring
17bo/p direction comes from +R; –I explains slow rate, not direction
18cInternal, symmetric alkyne gives only hexan-3-one
19bNa/NH₃ gives the trans-alkene
20d–CH₃ directs o/p; para isomer is 4-nitrotoluene
21cFriedel–Crafts fails on nitrobenzene
22dCH₃ (C1/C5), CH₂ (C2/C4), CH (C3), branch CH₃
23a9 × 1 = 9; 1 × 5 = 5; 9/14 = 64.3%
24b(2 × 8 + 2 − 8)/2 = 5
25dLindlar gives syn addition, cis-alkene
26a2.1/42 = 0.05 mol × 123 g/mol = 6.15 g
27asp carbons and the attached carbon lie on one line
28bLeast heat released = most stable
29cAll four ring H of p-xylene are equivalent
30c2° cation undergoes hydride shift to 3° cation
13 min left
‹
›