Chapter 6: Benzene and Aromaticity
What you will learn
How to name benzene derivatives, including ortho, meta and para.
Why Kekulé's structure was not enough, and how resonance and the delocalised π cloud explain benzene.
Resonance energy of benzene from heats of hydrogenation.
Hückel's (4n + 2) rule, and how to sort rings into aromatic, antiaromatic and non-aromatic.
Preparation, physical properties and the few addition reactions of benzene.
6.1 Aromatic hydrocarbons and their names
Aromatic hydrocarbons (arenes) are ring compounds with a special, stable π system. Many early ones had pleasant smells, hence the name. Most contain a benzene ring (benzenoid); a few, like the tropylium ion, do not (non-benzenoid).
Common names you must know.
| Structure in words | Common name | IUPAC name |
|---|---|---|
| C₆H₅CH₃ | toluene | methylbenzene |
| C₆H₄(CH₃)₂, groups 1,2 / 1,3 / 1,4 | o-, m-, p-xylene | 1,2-, 1,3-, 1,4-dimethylbenzene |
| C₆H₅CH=CH₂ | styrene | ethenylbenzene |
| C₆H₅CH(CH₃)₂ | cumene | (1-methylethyl)benzene |
| C₆H₃(CH₃)₃, groups 1,3,5 | mesitylene | 1,3,5-trimethylbenzene |
| Two fused rings, C₁₀H₈ | naphthalene | naphthalene |
C₆H₅– is the phenyl group (Ph). C₆H₅CH₂– is the benzyl group.
Disubstituted benzenes. Two groups can be on adjacent carbons (1,2: ortho, o-), one carbon apart (1,3: meta, m-) or opposite (1,4: para, p-). With three or more groups, use the lowest set of locants and list substituents alphabetically.
Worked example 6.1: A benzene ring carries C₂H₅ and CH₃ groups on carbons 1 and 3. Give its IUPAC name.
Solution: The locant set is 1,3 either way. The tie is broken alphabetically: ethyl comes before methyl and gets locant 1. Name: 1-ethyl-3-methylbenzene (m-ethyltoluene in common usage).
Worked example 6.2: How many aromatic isomers have formula C₈H₁₀?
Solution: Two extra carbons can be one ethyl group (ethylbenzene) or two methyls (o-, m- and p-xylene). Total = 4.
6.2 The puzzle of benzene's structure
Michael Faraday isolated benzene in 1825. Its formula C₆H₆ shows high unsaturation, yet benzene behaves almost like a saturated compound.
It does not decolourise bromine water.
It does not decolourise Baeyer's reagent.
It prefers substitution to addition.
It still adds three molecules of H₂ (giving cyclohexane), and its ozonolysis gives three molecules of glyoxal (OHC–CHO). So it behaves as if it had three C=C bonds.
Kekulé's proposal (1865). Six carbons in a ring with alternate single and double bonds, one H on each carbon.
Two facts did not fit.
Kekulé predicts two different 1,2-dibromobenzenes: one with the Br atoms across a C=C and one across a C–C. Only one exists. Kekulé said the double bonds keep oscillating, but that was a guess.
All six C–C bonds in benzene are equal, 139 pm long. This lies between C–C (154 pm) and C=C (134 pm).
6.3 Resonance and the orbital picture
Resonance. The two Kekulé structures differ only in where the π electrons are drawn. Neither is real. The true molecule is a single resonance hybrid, with every C–C bond identical, about "one and a half" bonds. The hybrid is drawn as a hexagon with a circle inside.
Orbital picture. Each carbon is sp². Its three sp² orbitals form two C–C σ bonds and one C–H σ bond, all in one plane at 120°. So benzene is a flat regular hexagon.
Each carbon also has one unhybridised p orbital standing perpendicular to the ring. Each p orbital overlaps equally with both neighbours. The six π electrons spread over all six carbons as two doughnut-shaped rings of electron cloud, one above and one below the plane. This is delocalisation, and it is the source of benzene's stability.

The two Kekulé drawings differ only in where the π electrons sit; the real molecule spreads them evenly above and below the flat ring.
Resonance energy. Hydrogenating one C=C in cyclohexene releases about 120 kJ/mol. A "cyclohexatriene" with three isolated C=C should release about 3 × 120 = 360 kJ/mol. Benzene actually releases about 208 kJ/mol.
Benzene is about 150 kJ/mol more stable than three isolated double bonds would make it. Addition would destroy this stability, so benzene prefers substitution, which keeps the ring intact.
Worked example 6.3: The enthalpy of hydrogenation of cyclohexene is −119 kJ/mol and that of benzene is −208 kJ/mol. Find the resonance energy of benzene.
Solution: Expected for three C=C = 3 × (−119) = −357 kJ/mol. Observed = −208 kJ/mol. Benzene releases 357 − 208 = 149 kJ/mol less, so its resonance energy is about 149 kJ/mol.
6.4 Aromaticity and Hückel's rule
A molecule or ion is aromatic when all four conditions hold.
It is cyclic.
It is planar.
Every ring atom has a p orbital in the ring's π system (complete conjugation; no sp³ ring atom).
The ring holds (4n + 2) π electrons, with n = 0, 1, 2 … That is 2, 6, 10, 14 …
If conditions 1–3 hold but the count is 4n (4, 8 …), the species is antiaromatic and unusually unstable. If condition 1, 2 or 3 fails, the species is non-aromatic and behaves like an ordinary alkene.
Counting π electrons. Each ring C=C gives 2. A ring carbanion (lone pair in a p orbital) gives 2. A ring carbocation (empty p orbital) gives 0. In pyrrole, furan and thiophene, one lone pair on N, O or S joins the ring and gives 2.
| Species | Ring π electrons | Planar, fully conjugated? | Verdict |
|---|---|---|---|
| Benzene | 6 | yes | aromatic (n = 1) |
| Cyclopropenyl cation | 2 | yes | aromatic (n = 0) |
| Cyclopentadienyl anion | 6 | yes | aromatic |
| Cycloheptatrienyl (tropylium) cation | 6 | yes | aromatic |
| Naphthalene | 10 | yes | aromatic (n = 2) |
| Pyridine, pyrrole, furan, thiophene | 6 | yes | aromatic |
| Cyclobutadiene | 4 | yes | antiaromatic |
| Cyclopentadienyl cation | 4 | yes | antiaromatic |
| Cyclopropenyl anion | 4 | yes | antiaromatic |
| Cyclopentadiene | 4 | no (one sp³ CH₂) | non-aromatic |
| Cycloheptatriene | 6 | no (one sp³ CH₂) | non-aromatic |
| Cyclooctatetraene | 8 | no (tub-shaped) | non-aromatic |
Cyclooctatetraene escapes antiaromaticity by folding into a tub. Its C=C bonds then behave like ordinary alkene bonds and it adds Br₂ readily.
Worked example 6.4: Is the cyclopentadienyl anion aromatic?
Solution: Remove H⁺ from the CH₂ of cyclopentadiene. That carbon becomes sp² and its lone pair sits in a p orbital. The ring is cyclic, planar and fully conjugated. π electrons = 2 + 2 (two C=C) + 2 (lone pair) = 6 = 4(1) + 2. It is aromatic. This is why cyclopentadiene (pKa about 16) is far more acidic than ordinary alkenes.
Worked example 6.5: Cycloheptatriene is non-aromatic, but the tropylium cation C₇H₇⁺ is aromatic. Explain.
Solution: Cycloheptatriene has an sp³ CH₂ that breaks the ring of p orbitals. Removing H⁻ from it leaves an sp² carbon with an empty p orbital. Now all seven carbons are conjugated with 6 π electrons (three C=C). 6 = 4n + 2 with n = 1, so the cation is aromatic.
Worked example 6.6: Classify cyclooctatetraene and naphthalene.
Solution: Cyclooctatetraene has 8 π electrons (4n, n = 2) but is tub-shaped, so it is non-aromatic. Naphthalene is planar and fully conjugated over ten carbons with 10 π electrons (n = 2), so it is aromatic.
6.5 Preparation of benzene
| Starting material | Reagent and condition | Product |
|---|---|---|
| HC≡CH (3 mol) | red-hot iron tube, 873 K | C₆H₆ |
| C₆H₅COONa | NaOH + CaO, heat | C₆H₆ + Na₂CO₃ |
| C₆H₅OH | zinc dust, heat | C₆H₆ + ZnO |
| CH₃(CH₂)₄CH₃ | Cr₂O₃/V₂O₅/Mo₂O₃, 773 K, 10–20 atm | C₆H₆ + 4H₂ |
Decarboxylation of sodium benzoate works like that of aliphatic salts: one carbon is lost as Na₂CO₃.
6.6 Physical properties
Benzene is a colourless liquid with a typical smell, boiling at about 353 K. It is immiscible with water and lighter than it. It dissolves fats and many organic compounds. It burns with a sooty flame because its C : H ratio is high. Benzene is toxic and carcinogenic, so school labs avoid it.
6.7 Addition reactions of benzene (under harsh conditions)
Benzene adds only when the conditions are strong enough to pay back the lost resonance energy.
| Reagent and condition | Product | Note |
|---|---|---|
| 3H₂, Ni, high T and P | cyclohexane, C₆H₁₂ | all aromaticity lost |
| 3Cl₂, UV light, about 500 K, no catalyst | benzene hexachloride (BHC), C₆H₆Cl₆ | an insecticide (gammaxane) |
| O₂ (excess), burning | CO₂ + H₂O | sooty flame |
Compare: Cl₂ with a Lewis acid (FeCl₃) and no light gives chlorobenzene by substitution (Chapter 7). Same reagent, different condition, different reaction type.
Worked example 6.7: What volume of O₂ at STP is needed to burn 7.8 g of benzene completely?
Solution: Molar mass of C₆H₆ = 78 g/mol, so 7.8 g = 0.1 mol. From the equation, 1 mol benzene needs 7.5 mol O₂. O₂ = 0.75 mol = 0.75 × 22.4 = 16.8 L.
Quick revision
Benzene: planar hexagon, sp² carbons, all C–C bonds 139 pm, all angles 120°.
Kekulé structures are resonance contributors; the real molecule is the hybrid with a delocalised π cloud above and below the ring.
Resonance energy about 150 kJ/mol (360 expected − 208 observed for hydrogenation).
Aromatic: cyclic, planar, fully conjugated, (4n + 2) π electrons. Antiaromatic: same but 4n. Non-aromatic: any of the first three conditions fails.
Aromatic ions: cyclopropenyl cation (2), cyclopentadienyl anion (6), tropylium cation (6).
ortho = 1,2; meta = 1,3; para = 1,4. C₈H₁₀ has 4 aromatic isomers; C₉H₁₂ has 8.
Benzene from ethyne (873 K), sodium benzoate + soda lime, phenol + Zn dust.
Addition only under harsh conditions: 3H₂/Ni → cyclohexane; 3Cl₂/UV → BHC.
NEET traps
Cyclooctatetraene has 8 π electrons but is non-aromatic (tub-shaped), not antiaromatic.
Cyclopentadiene and cycloheptatriene are non-aromatic; their ions can be aromatic. Read the charge.
A ring carbocation contributes 0 π electrons; a ring carbanion contributes 2.
Cl₂ with UV light adds to benzene (BHC); Cl₂ with FeCl₃ substitutes (chlorobenzene).
Kekulé structures are not two molecules flipping back and forth; they are drawings of one hybrid.
In naming, alphabetical order decides only after the lowest locant set is fixed.
Practice MCQs: Chapter 6
Level 1: Concept check
1. The C–C bond length in benzene is about (a) 154 pm (b) 134 pm (c) 139 pm (d) 120 pm
2. The hybridisation of each carbon in benzene is (a) sp³ (b) sp² (c) sp (d) sp³d
3. According to Hückel's rule, an aromatic ring has how many π electrons? (a) 4n (b) 2n (c) 4n + 2 (d) 4n + 1
4. The IUPAC name of toluene is (a) ethylbenzene (b) dimethylbenzene (c) ethenylbenzene (d) methylbenzene
5. A 1,4-disubstituted benzene is called (a) ortho (b) meta (c) para (d) ipso
6. The number of π electrons in benzene is (a) 4 (b) 6 (c) 8 (d) 12
7. Benzene reacts with chlorine in UV light (no catalyst) to give (a) benzene hexachloride (b) chlorobenzene (c) 1,4-dichlorobenzene (d) no product
8. Which is aromatic? (a) Cyclobutadiene (b) Cyclooctatetraene (c) Cyclopentadienyl anion (d) Cyclopentadiene
9. Sodium benzoate heated with soda lime gives (a) benzene (b) toluene (c) phenol (d) benzoic acid
10. Kekulé proposed that benzene is (a) an open chain with two triple bonds (b) a six-membered ring with alternate single and double bonds (c) a three-dimensional prism (d) a five-membered ring
Level 2: NEET standard
11. The number of aromatic isomers of formula C₈H₁₀ is (a) 3 (b) 4 (c) 5 (d) 2
12. Which is antiaromatic? (a) Benzene (b) Tropylium cation (c) Naphthalene (d) Cyclobutadiene
13. Cyclooctatetraene is non-aromatic because (a) it has 8 π electrons and is tub-shaped, not planar (b) it has an sp³ ring carbon (c) it is not cyclic (d) it has 10 π electrons
14. Cyclopentadiene is not aromatic because (a) it has 6 π electrons (b) it is not cyclic (c) its CH₂ carbon is sp³, breaking the ring of p orbitals (d) it is tub-shaped
15. Benzene does not decolourise bromine water because (a) it has no π electrons (b) addition would destroy the stability of the delocalised ring (c) it is a saturated compound (d) bromine is insoluble in benzene
16. Hydrogenation enthalpies: cyclohexene −120 kJ/mol, benzene −208 kJ/mol. The resonance energy of benzene is about (a) 88 kJ/mol (b) 360 kJ/mol (c) 152 kJ/mol (d) 208 kJ/mol
17. Phenol heated with zinc dust gives (a) benzene (b) cyclohexanol (c) benzoic acid (d) toluene
18. Ozonolysis of benzene followed by Zn/H₂O gives (a) ethanal (b) methanal (c) three molecules of glyoxal (d) propanone
19. The IUPAC name of cumene is (a) propylbenzene (b) (1-methylethyl)benzene (c) ethylbenzene (d) 1,3,5-trimethylbenzene
20. Which ion is aromatic? (a) Cyclopropenyl cation (b) Cyclopropenyl anion (c) Cyclopentadienyl cation (d) Cycloheptatrienyl anion
21. The volume of O₂ at STP needed to burn 3.9 g of benzene completely is (a) 16.8 L (b) 4.2 L (c) 11.2 L (d) 8.4 L
22. Naphthalene has (a) 10 π electrons and is aromatic (b) 8 π electrons and is antiaromatic (c) 12 π electrons and is non-aromatic (d) 10 π electrons and is antiaromatic
Level 3: Challenge
23. In pyrrole (C₄H₄NH), the aromatic sextet is made of (a) 4 π electrons from two C=C only (b) 4 π electrons from two C=C and 2 from the N lone pair (c) 8 π electrons from all atoms (d) 6 π electrons from three C=C
24. The number of aromatic isomers of formula C₉H₁₂ is (a) 6 (b) 7 (c) 8 (d) 9
25. Which species is aromatic? (a) Cycloheptatriene (b) Cycloheptatrienyl anion (c) Cyclooctatetraene (d) Tropylium cation
26. Because of resonance, the enthalpy of hydrogenation of benzene is (a) less than three times that of cyclohexene (b) exactly three times that of cyclohexene (c) more than three times that of cyclohexene (d) zero
27. All six C–C bonds of benzene have the same length and only one 1,2-dibromobenzene exists. This shows that (a) Kekulé's single structure is exact (b) the π electrons are delocalised over the ring (c) benzene is non-planar (d) benzene contains triple bonds
28. A benzene ring carries three methyl groups whose positions can be numbered as 1,2,4 or 1,3,4 or 1,2,5. The correct IUPAC name is (a) 1,3,4-trimethylbenzene (b) 1,2,5-trimethylbenzene (c) 1,2,4-trimethylbenzene (d) 2,4,5-trimethylbenzene
29. Assertion (A): The cyclopentadienyl anion is aromatic. Reason (R): It is cyclic, planar and fully conjugated, with 6 π electrons. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: Benzene is a planar molecule with all C–C–C bond angles equal to 120°. Statement II: Cyclobutadiene is aromatic because it is planar and cyclic. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | c | Between single (154) and double (134). |
| 2 | b | Three σ bonds in a plane plus one p orbital. |
| 3 | c | 2, 6, 10 … π electrons. |
| 4 | d | C₆H₅CH₃. |
| 5 | c | Opposite positions. |
| 6 | b | Three C=C in Kekulé form, 6 π electrons. |
| 7 | a | Free-radical addition gives C₆H₆Cl₆. |
| 8 | c | 6 π electrons, planar, conjugated. |
| 9 | a | C₆H₅COONa loses CO₂ as Na₂CO₃. |
| 10 | b | Alternate single and double bonds. |
| 11 | b | Ethylbenzene and three xylenes. |
| 12 | d | 4 π electrons, planar, cyclic, conjugated. |
| 13 | a | Tub shape breaks conjugation. |
| 14 | c | sp³ carbon interrupts the p-orbital ring. |
| 15 | b | Addition loses about 150 kJ/mol resonance energy. |
| 16 | c | 3 × 120 − 208 = 152. |
| 17 | a | Zn removes O as ZnO. |
| 18 | c | Three C=C cut: 3 OHC–CHO. |
| 19 | b | Isopropyl on benzene. |
| 20 | a | 2 π electrons, n = 0. |
| 21 | d | 0.05 mol × 7.5 = 0.375 mol × 22.4 = 8.4 L. |
| 22 | a | n = 2. |
| 23 | b | N lone pair joins the ring. |
| 24 | c | Propyl, isopropyl, 3 ethyltoluenes, 3 trimethylbenzenes. |
| 25 | d | 6 π electrons over seven sp² carbons. |
| 26 | a | Resonance stabilisation lowers it (208 vs 360). |
| 27 | b | Equal bonds mean delocalisation. |
| 28 | c | Lowest locant set 1,2,4. |
| 29 | a | All Hückel conditions met. |
| 30 | c | Cyclobutadiene has 4 π electrons: antiaromatic. |
Chapter 6 revision sheet
One-page summary
Arenes contain at least one benzene ring; C₆H₅– is phenyl, C₆H₅CH₂– is benzyl.
Disubstituted benzenes: ortho (1,2), meta (1,3), para (1,4).
Benzene C₆H₆ is a planar regular hexagon; all six carbons sp²; all angles 120°; all C–C bonds 139 pm.
Kekulé's two structures are resonance contributors; the real molecule is their hybrid.
Six unhybridised p orbitals overlap all round the ring, giving a delocalised π cloud above and below the plane.
Benzene gives one monosubstituted product and three disubstituted products (o, m, p).
Resonance energy about 150 kJ/mol: expected 3 × 120 = 360 kJ/mol, observed about 208 kJ/mol on hydrogenation.
Hückel's rule: cyclic, planar, fully conjugated, (4n + 2) π electrons → aromatic.
Same three conditions with 4n π electrons → antiaromatic (cyclobutadiene, cyclopentadienyl cation).
Any of the first three conditions fails → non-aromatic (cyclooctatetraene is tub-shaped; cyclopentadiene has an sp³ CH₂).
Aromatic ions: cyclopropenyl cation (2 π), cyclopentadienyl anion (6 π), tropylium cation (6 π).
Preparation: 3HC≡CH (Fe, 873 K); sodium benzoate + soda lime; phenol + Zn dust.
Benzene resists addition: needs H₂/Ni with heat and pressure (cyclohexane) or Cl₂ in UV light (benzene hexachloride).
Benzene is a colourless, non-polar, carcinogenic liquid that burns with a sooty flame.
Must-remember table
| Species | π electrons | Planar and fully conjugated? | Class |
|---|---|---|---|
| Benzene | 6 | Yes | Aromatic |
| Cyclopropenyl cation | 2 | Yes | Aromatic |
| Cyclopentadienyl anion | 6 | Yes | Aromatic |
| Tropylium (cycloheptatrienyl) cation | 6 | Yes | Aromatic |
| Naphthalene | 10 | Yes | Aromatic |
| Cyclobutadiene | 4 | Yes | Antiaromatic |
| Cyclopentadienyl cation | 4 | Yes | Antiaromatic |
| Cyclooctatetraene | 8 | No (tub) | Non-aromatic |
| Cyclopentadiene | 4 | No (sp³ CH₂) | Non-aromatic |
Memory aids
"C-P-F-H" (Cyclic, Planar, Fully conjugated, Hückel number): the four checks for aromaticity, in that order.
"2, 6, 10 — Aromatic Again; 4, 8 — Antiaromatic Ache": (4n + 2) numbers are good; 4n numbers are bad.
"O-M-P = 1-2, 1-3, 1-4": ortho, meta, para in alphabetical and numerical order.
"360 minus 208 ≈ 150": the resonance energy sum.
"Tub is Not flat": cyclooctatetraene folds into a tub, so it is non-aromatic.
Concept connections
Resonance, hybridisation and delocalised π bonding come from Chemistry Book 3: Chemical Bonding and Molecular Structure and Chemistry Book 14: Some Basic Principles of Organic Chemistry.
Enthalpy of hydrogenation and resonance energy use Hess's law from Chemistry Book 4: Chemical Thermodynamics.
Phenol, benzoic acid and aniline (benzene derivatives) are studied in Chemistry Book 17: Organic Compounds Containing Oxygen and Chemistry Book 18: Organic Compounds Containing Nitrogen.
Practice MCQs: Chapter 6, Level 4 (new NEET pattern)
31. Match the species (List I) with its number of π electrons (List II).
List I
A. Cyclopentadienyl anion
B. Cyclopropenyl cation
C. Cyclooctatetraene
D. Naphthalene
List II
(i) 8
(ii) 10
(iii) 6
(iv) 2
(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-i, C-iv, D-ii (d) A-iii, B-iv, C-i, D-ii
32. Match the species (List I) with its classification (List II).
List I
A. Benzene
B. Cyclobutadiene
C. Cyclopenta-1,3-diene
D. Cyclopropenyl cation
List II
(i) Antiaromatic, 4 π electrons
(ii) Non-aromatic, contains an sp³ carbon
(iii) Aromatic, 2 π electrons
(iv) Aromatic, 6 π electrons
(a) A-iv, B-i, C-ii, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-iii, B-i, C-ii, D-iv (d) A-i, B-iv, C-ii, D-iii
33. Match the common name (List I) with the formula (List II).
List I
A. Toluene
B. Anisole
C. Styrene
D. Cumene
List II
(i) C₆H₅CH=CH₂
(ii) C₆H₅CH(CH₃)₂
(iii) C₆H₅OCH₃
(iv) C₆H₅CH₃
(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iv, B-iii, C-ii, D-i (d) A-iv, B-i, C-iii, D-ii
34. Match the conversion (List I) with the reagent or condition (List II).
List I
A. Ethyne → benzene
B. Sodium benzoate → benzene
C. Phenol → benzene
D. Benzene → cyclohexane
List II
(i) NaOH + CaO, heat
(ii) Red-hot iron tube, 873 K
(iii) H₂, Ni, heat and pressure
(iv) Zn dust, heat
(a) A-ii, B-iv, C-i, D-iii (b) A-i, B-ii, C-iv, D-iii (c) A-ii, B-i, C-iv, D-iii (d) A-ii, B-i, C-iii, D-iv
35. How many of the following statements are correct?
A. All C–C bonds in benzene are 139 pm long.
B. Benzene has two different C–C bond lengths, as one Kekulé structure suggests.
C. Benzene gives only one monobromo derivative.
D. Benzene gives three dibromo derivatives.
E. Benzene readily decolourises Baeyer's reagent.
(a) 3 (b) 4 (c) 2 (d) 5
36. Choose the correct set of statements.
A. A ring must be planar to be aromatic.
B. Aromatic species have (4n + 2) π electrons.
C. Cyclooctatetraene is aromatic because it has 8 π electrons.
D. Pyridine is aromatic with 6 π electrons.
(a) A and B only (b) A, B and D only (c) B, C and D only (d) A and C only
37. How many of the following statements are correct?
A. Hydrogenation of cyclohexene releases about 120 kJ/mol.
B. Three isolated C=C bonds would release about 360 kJ/mol.
C. Hydrogenation of benzene actually releases about 208 kJ/mol.
D. Benzene is about 150 kJ/mol less stable than the imaginary cyclohexatriene.
(a) 4 (b) 2 (c) 1 (d) 3
38. Choose the correct set of statements.
A. Benzene adds 3 mol of H₂ over Ni, under heat and pressure, to give cyclohexane.
B. Benzene adds chlorine in UV light to give C₆H₆Cl₆.
C. Benzene burns with a sooty flame.
D. Benzene adds Br₂ readily in CCl₄ at room temperature.
(a) A, B and C only (b) A and D only (c) B, C and D only (d) A, B, C and D
39. Enthalpies of hydrogenation (kJ/mol): cyclohexene −120, cyclohexa-1,3-diene −232, benzene −208. Which conclusion is correct? (a) Resonance energy of benzene is about 88 kJ/mol (b) Benzene is less stable than cyclohexa-1,3-diene (c) Resonance energy of benzene is about 150 kJ/mol (d) Resonance energy of benzene is about 360 kJ/mol
40. A table describes four cyclic species. P: planar, fully conjugated, 6 π electrons. Q: planar, fully conjugated, 4 π electrons. R: tub-shaped, 8 π electrons. S: planar ring with one sp³ carbon, 4 π electrons. The correct classification is (a) P aromatic, Q non-aromatic, R antiaromatic, S aromatic (b) P and Q aromatic, R and S non-aromatic (c) P aromatic, Q antiaromatic, R antiaromatic, S aromatic (d) P aromatic, Q antiaromatic, R and S non-aromatic
41. The volume of H₂ at STP needed to convert 3.9 g of benzene completely into cyclohexane is (a) 1.12 L (b) 3.36 L (c) 2.24 L (d) 6.72 L
Passage for Q42–43: Arjun studies cyclopenta-1,3-diene, C₅H₆. With a strong base it loses H⁺ from the CH₂ group to form an anion. In a separate reaction, removal of H⁻ would give a cation. He finds cyclopentadiene is far more acidic (pKa about 16) than ordinary alkanes.
42. Which of the three species is aromatic? (a) Cyclopentadiene (b) Cyclopentadienyl cation (c) Cyclopentadienyl anion (d) All three
43. The high acidity of cyclopentadiene is best explained by (a) its CH₂ carbon being sp hybridised (b) loss of H⁺ giving a planar, aromatic 6 π anion (c) the anion being antiaromatic (d) hydrogen bonding with the base
44. The number of trimethylbenzene isomers (C₉H₁₂ with three CH₃ groups on one ring) is (a) 4 (b) 2 (c) 6 (d) 3
45. Which species is aromatic, positively charged and has 6 π electrons? (a) Cyclopropenyl cation (b) Cyclopentadienyl cation (c) Cycloheptatrienyl (tropylium) cation (d) Cyclopentadienyl anion
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | d | Anion 6, cation 2, COT 8, naphthalene 10 |
| 32 | a | Benzene 6 π aromatic; cyclobutadiene 4 π antiaromatic; diene has sp³ CH₂; C₃H₃⁺ 2 π aromatic |
| 33 | b | Anisole is methoxybenzene; styrene vinylbenzene; cumene isopropylbenzene |
| 34 | c | Fe tube trimerises ethyne; soda lime decarboxylates; Zn removes O; Ni hydrogenates |
| 35 | a | A, C, D true; benzene resists Baeyer's reagent |
| 36 | b | Cyclooctatetraene is non-planar and non-aromatic |
| 37 | d | Benzene is about 150 kJ/mol more stable, not less |
| 38 | a | Benzene does not add Br₂ under alkene conditions |
| 39 | c | 3 × 120 − 208 = 152 ≈ 150 kJ/mol |
| 40 | d | Q fits antiaromatic; R non-planar and S not fully conjugated, so both non-aromatic |
| 41 | b | 3.9/78 = 0.05 mol × 3 × 22.4 = 3.36 L |
| 42 | c | Anion: planar, fully conjugated, 6 π |
| 43 | b | The conjugate base is aromatic, so it is very stable |
| 44 | d | 1,2,3-, 1,2,4- and 1,3,5-trimethylbenzene |
| 45 | c | C₇H₇⁺: three C=C give 6 π over seven planar sp² carbons |