Chapter 9 of 11 · 22 min read

Chapter 7: Electrophilic Substitution of Benzene and Directive Influence

What you will learn

  • The three-step mechanism of electrophilic aromatic substitution (EAS) through the σ-complex.

  • How the electrophile is made in halogenation, nitration, sulphonation and Friedel–Crafts reactions.

  • Limits of Friedel–Crafts alkylation, and why acylation avoids them.

  • Which groups direct ortho/para and which direct meta, and which activate or deactivate the ring.

  • How to plan the order of steps to make a given disubstituted benzene.

7.1 Why benzene substitutes

Benzene's π cloud is rich in electrons, so it attracts electrophiles, like an alkene. But adding across a ring bond would destroy about 150 kJ/mol of resonance energy. Substitution swaps one H for E and keeps the aromatic ring. So benzene's typical reaction is electrophilic aromatic substitution.

7.2 The general mechanism

Step 1: Make the electrophile. A reagent, often with a Lewis acid, produces a strong electrophile E⁺.

Step 2: Attack and σ-complex. Two π electrons from the ring form a bond to E⁺. The carbon that takes E becomes sp³ and carries both H and E. The ring now has a positive charge spread by resonance over the other three carbons: the two ortho and the one para to the sp³ carbon. This cation is the arenium ion or σ-complex. Aromaticity is lost, so this step is slow and rate-determining.

Step 3: Lose H⁺. A base (AlCl₄⁻, FeCl₄⁻ or HSO₄⁻) removes the H from the sp³ carbon. The pair of electrons from the C–H bond returns to the ring, and aromaticity is restored. This step is fast.

C6H6+E+→slow[C6H6E]+→−H+fastC6H5E\mathrm{C_6H_6 + E^+ \xrightarrow{slow} [C_6H_6E]^+ \xrightarrow[-H^+]{fast} C_6H_5E}
Figure 7.1 · Mechanism of electrophilic aromatic substitution through the σ-complex
Figure 7.1 · Mechanism of electrophilic aromatic substitution through the σ-complex

Only step 2 breaks the aromatic ring, which is why it is slow; step 3 restores the ring, which is why substitution wins over addition.

7.3 The four main reactions

(a) Halogenation. Benzene reacts with Cl₂ or Br₂ in the presence of a Lewis acid (anhydrous FeCl₃, FeBr₃ or AlCl₃), in the dark and cold. The Lewis acid pulls Cl⁻ away from Cl₂, leaving Cl⁺.

Cl2+FeCl3→Cl++FeCl4−\mathrm{Cl_2 + FeCl_3 \rightarrow Cl^+ + FeCl_4^-}
C6H6+Cl2→dark, coldanhyd. FeCl3C6H5Cl+HCl\mathrm{C_6H_6 + Cl_2 \xrightarrow[dark,\ cold]{anhyd.\ FeCl_3} C_6H_5Cl + HCl}

With excess chlorine, substitution continues to hexachlorobenzene, C₆Cl₆. Iodination is reversible and needs an oxidising agent (HNO₃ or HIO₃) to remove HI.

(b) Nitration. A mixture of concentrated HNO₃ and concentrated H₂SO₄ (nitrating mixture) at about 323–333 K gives nitrobenzene. H₂SO₄ is the stronger acid; it protonates HNO₃, which then loses water to give the nitronium ion, NO₂⁺.

HNO3+2H2SO4⇌NO2++H3O++2HSO4−\mathrm{HNO_3 + 2H_2SO_4 \rightleftharpoons NO_2^+ + H_3O^+ + 2HSO_4^-}
C6H6+HNO3→323-333 Kconc. H2SO4C6H5NO2+H2O\mathrm{C_6H_6 + HNO_3 \xrightarrow[323\text{-}333\ K]{conc.\ H_2SO_4} C_6H_5NO_2 + H_2O}

(c) Sulphonation. Heating benzene with fuming sulphuric acid (oleum, H₂SO₄ + SO₃) gives benzenesulphonic acid. The electrophile is SO₃: the sulphur carries a large positive charge, though SO₃ is neutral. Sulphonation is reversible; heating with dilute acid removes the –SO₃H group.

C6H6+H2SO4(SO3)→ΔC6H5SO3H+H2O\mathrm{C_6H_6 + H_2SO_4(SO_3) \xrightarrow{\Delta} C_6H_5SO_3H + H_2O}

(d) Friedel–Crafts alkylation. An alkyl halide and anhydrous AlCl₃ attach an alkyl group to the ring.

CH3Cl+AlCl3→CH3++AlCl4−\mathrm{CH_3Cl + AlCl_3 \rightarrow CH_3^+ + AlCl_4^-}
C6H6+CH3Cl→anhyd. AlCl3C6H5CH3+HCl\mathrm{C_6H_6 + CH_3Cl \xrightarrow{anhyd.\ AlCl_3} C_6H_5CH_3 + HCl}

AlCl₃ must be anhydrous; water destroys it. Alkylation has three limits:

  1. Polyalkylation. An alkyl group activates the ring, so toluene reacts faster than benzene and gets alkylated again. Excess benzene reduces this.

  2. Rearrangement. The carbocation can rearrange. 1-Chloropropane gives mainly isopropylbenzene (cumene), because CH₃CH₂CH₂⁺ shifts to (CH₃)₂CH⁺.

  3. No reaction on strongly deactivated rings. Nitrobenzene does not undergo Friedel–Crafts reactions; it is even used as their solvent. Aryl and vinyl halides cannot act as the alkyl halide.

(e) Friedel–Crafts acylation. An acid chloride (or anhydride) with anhydrous AlCl₃ gives the acylium ion, RC≡O⁺, which attacks the ring. The product is an aryl ketone.

CH3COCl+AlCl3→CH3C≡O++AlCl4−\mathrm{CH_3COCl + AlCl_3 \rightarrow CH_3C{\equiv}O^+ + AlCl_4^-}
C6H6+CH3COCl→anhyd. AlCl3C6H5COCH3+HCl\mathrm{C_6H_6 + CH_3COCl \xrightarrow{anhyd.\ AlCl_3} C_6H_5COCH_3 + HCl}

The product, acetophenone, has an electron-withdrawing C=O on the ring. It is less reactive than benzene, so a second acylation does not happen. The acylium ion is resonance-stabilised and does not rearrange. These two advantages make acylation cleaner than alkylation.

Reaction map: substitution of benzene

ReactionReagent and conditionElectrophileProduct
ChlorinationCl₂, anhyd. FeCl₃, dark, coldCl⁺C₆H₅Cl
BrominationBr₂, anhyd. FeBr₃Br⁺C₆H₅Br
Nitrationconc. HNO₃ + conc. H₂SO₄, 323–333 KNO₂⁺C₆H₅NO₂
Sulphonationoleum (H₂SO₄ + SO₃), heatSO₃C₆H₅SO₃H
Friedel–Crafts alkylationR–Cl, anhyd. AlCl₃R⁺C₆H₅R
Friedel–Crafts acylationRCOCl, anhyd. AlCl₃RCO⁺C₆H₅COR

Worked example 7.1: Write the equations for forming the electrophile in the bromination and the acetylation of benzene.

Solution: Bromination: Br₂ + FeBr₃ → Br⁺ + FeBr₄⁻. Acetylation: CH₃COCl + AlCl₃ → CH₃CO⁺ + AlCl₄⁻. In both, the Lewis acid takes a halide ion and leaves a cation.

Worked example 7.2: Benzene is treated with 1-chloropropane and anhydrous AlCl₃. Predict the main product.

Solution: AlCl₃ removes Cl⁻ to give the 1° cation CH₃CH₂CH₂⁺. A hydride shifts from C-2 to give the more stable 2° cation (CH₃)₂CH⁺. This attacks the ring. The main product is isopropylbenzene (cumene), not propylbenzene.

Worked example 7.3: 7.8 g of benzene is nitrated. The yield is 80%. What mass of nitrobenzene is obtained?

Solution: 7.8/78 = 0.1 mol of benzene gives at most 0.1 mol of C₆H₅NO₂ (M = 123 g/mol), which is 12.3 g. At 80% yield: 0.8 × 12.3 = 9.84 g.

7.4 Directive influence of substituents

A group already on the ring does two jobs. It decides where the next group goes (ortho/para or meta). It decides how fast the ring reacts (activating or deactivating compared with benzene).

Ortho/para directors that activate. –OH, –NH₂, –NHR, –NR₂, –OCH₃, –NHCOCH₃, –CH₃ and other alkyl groups.

  • Groups with a lone pair on the atom next to the ring (O, N) donate it into the ring by resonance (+R effect). Resonance structures put a negative charge at the ortho and para carbons. These positions become the richest in electrons.

  • In the σ-complex for ortho or para attack, one resonance form puts the positive charge on the carbon carrying the group. A lone pair on O or N then shares that charge, giving an extra stable form. Meta attack never gets this form.

  • Alkyl groups work through +I effect and hyperconjugation. They stabilise the ortho/para σ-complex where the positive charge sits on the carbon bearing the alkyl group.

Ortho/para directors that deactivate. The halogens: –F, –Cl, –Br, –I.

  • Their strong –I effect pulls electron density out of the whole ring, so they react more slowly than benzene.

  • Their lone pairs still donate by +R, which helps the ortho/para σ-complex more than the meta one. So the direction is ortho/para even though the rate is lower.

Meta directors that deactivate. –NO₂, –CN, –CHO, –COR, –COOH, –COOR, –SO₃H, –NR₃⁺, –CCl₃, –CF₃.

  • These groups withdraw electrons by –I and usually –R. Resonance structures put positive charge on the ortho and para carbons.

  • In the σ-complex for ortho or para attack, one form puts the positive charge right next to the electron-withdrawing group: very unfavourable. Meta attack avoids this form, so meta is the least bad option.

  • In short, meta directors do not activate meta; they deactivate ortho and para more.

Figure 7.2 · Ortho/para vs meta directors and their effect on rate
Figure 7.2 · Ortho/para vs meta directors and their effect on rate

Read left to right: groups that donate electrons speed the ring up and send E to ortho/para; halogens slow it but still send E to ortho/para; withdrawing groups slow it most and send E to meta.

Ortho has two positions and para only one. Yet para is often the major product, because the group already present crowds the ortho positions (steric hindrance).

SubstituentElectronic effectRate vs benzeneDirects to
–NH₂, –OH, –OCH₃strong +Rmuch fasterortho, para
–NHCOCH₃moderate +Rfasterortho, para
–CH₃, –C₂H₅+I, hyperconjugationfasterortho, para
–F, –Cl, –Br, –I–I stronger than +Rslowerortho, para
–CHO, –COR, –COOH–I, –Rslowermeta
–CN, –SO₃H–I, –Rmuch slowermeta
–NO₂, –NR₃⁺strong –I (and –R for NO₂)much slowermeta

Worked example 7.4: Toluene is chlorinated with Cl₂ and anhydrous FeCl₃ in the dark. Predict the products.

Solution: –CH₃ is an activating ortho/para director. The products are 2-chlorotoluene and 4-chlorotoluene (o- and p-chlorotoluene). Note: in sunlight without FeCl₃, chlorine would attack the CH₃ side chain instead (free-radical), giving benzyl chloride.

Worked example 7.5: Arrange in decreasing order of reactivity towards nitration: nitrobenzene, toluene, benzene, phenol, chlorobenzene.

Solution: Strong +R activator first, then +I activator, then benzene, then weak deactivator, then strong deactivator. Phenol > toluene > benzene > chlorobenzene > nitrobenzene.

Worked example 7.6: Why is chlorobenzene less reactive than benzene, yet an ortho/para director?

Solution: Chlorine's –I effect lowers the electron density of the whole ring, so the rate falls. For direction, compare σ-complexes. Ortho and para attack each give one form with + on the carbon bearing Cl; a Cl lone pair can share this charge (+R). Meta attack has no such form. So ortho/para σ-complexes are less unstable, and those products dominate.

7.5 Planning the order of steps

The first group placed decides where the second goes. So the order matters.

TargetRouteReason
m-Bromonitrobenzenenitrate, then brominate–NO₂ directs Br to meta
p-Bromonitrobenzenebrominate, then nitrate; separate para–Br directs NO₂ to o/p
m-NitroacetophenoneFriedel–Crafts acylation, then nitrate–COCH₃ directs meta; nitrobenzene will not undergo Friedel–Crafts
p-Nitrotoluenemethylate (Friedel–Crafts), then nitrate–CH₃ directs o/p
m-Nitrobenzoic acidfrom benzoic acid, nitrate–COOH directs meta

Worked example 7.7: Plan a route from benzene to m-chloronitrobenzene and explain why the reverse order fails.

Solution: Nitrate first (conc. HNO₃ + conc. H₂SO₄) to get nitrobenzene. Then chlorinate (Cl₂, FeCl₃); –NO₂ sends Cl to meta. If chlorination came first, –Cl would send the NO₂ group to ortho and para, giving o- and p-chloronitrobenzene instead.

Worked example 7.8: Benzene is acetylated (CH₃COCl, AlCl₃) and the product is brominated (Br₂, FeBr₃). Name the final product.

Solution: Acetylation gives acetophenone, C₆H₅COCH₃. The –COCH₃ group is a deactivating meta director, so Br enters meta. Product: 3-bromoacetophenone, 1-(3-bromophenyl)ethan-1-one.

Quick revision

  • EAS: make E⁺; ring attacks E⁺ to form the σ-complex (slow, aromaticity lost); base removes H⁺ (fast, aromaticity back).

  • Electrophiles: Cl⁺/Br⁺ (X₂ + FeX₃), NO₂⁺ (HNO₃ + H₂SO₄), SO₃ (oleum), R⁺ (RCl + AlCl₃), RCO⁺ (RCOCl + AlCl₃).

  • Friedel–Crafts alkylation: polyalkylation, rearrangement, fails on nitrobenzene. Acylation: no rearrangement, no polyacylation.

  • o/p activators: –NH₂, –OH, –OCH₃, –NHCOCH₃, alkyl.

  • o/p deactivators: halogens (–I beats +R for rate; +R decides direction).

  • m deactivators: –NO₂, –CN, –CHO, –COR, –COOH, –SO₃H, –NR₃⁺, –CF₃.

  • Para is often major over ortho because of steric hindrance.

  • Order of steps decides the isomer; Friedel–Crafts must come before any strong deactivator.

NEET traps

  • –NO₂ directs meta not because meta is enriched but because ortho and para are depleted more.

  • Halogens are ortho/para directors even though they deactivate the ring.

  • 1-Chloropropane with AlCl₃ gives mainly cumene, not propylbenzene.

  • Friedel–Crafts reactions fail on nitrobenzene; it is used as a solvent for them.

  • Cl₂ + FeCl₃ in the dark substitutes the ring; Cl₂ + light on toluene substitutes the side chain.

  • The slow step is formation of the σ-complex, not formation of E⁺ or loss of H⁺.

Practice MCQs: Chapter 7

Level 1: Concept check

1. The characteristic reaction of benzene is (a) electrophilic addition (b) electrophilic substitution (c) nucleophilic addition (d) free-radical addition

2. The electrophile in the nitration of benzene is (a) NO₂⁻ (b) NO₃⁻ (c) NO₂⁺ (d) NO⁺

3. The catalyst used in Friedel–Crafts reactions is (a) anhydrous AlCl₃ (b) aqueous AlCl₃ (c) Ni (d) Pt

4. Benzene reacts with Cl₂ in the presence of anhydrous FeCl₃ in the dark to give (a) benzene hexachloride (b) chlorobenzene (c) cyclohexane (d) toluene

5. Which group is a meta director? (a) –OH (b) –CH₃ (c) –Cl (d) –NO₂

6. The σ-complex (arenium ion) formed in EAS is a (a) carbanion (b) free radical (c) carbocation (d) carbene

7. The electrophile in the sulphonation of benzene is (a) SO₃ (b) SO₂ (c) HSO₄⁻ (d) H₂S

8. Acetophenone is made from benzene by (a) Friedel–Crafts alkylation with CH₃Cl (b) Friedel–Crafts acylation with CH₃COCl (c) nitration (d) sulphonation

9. Which group is an activating ortho/para director? (a) –NO₂ (b) –CHO (c) –OH (d) –COOH

10. Which group directs ortho/para but deactivates the ring? (a) –Cl (b) –NH₂ (c) –CH₃ (d) –CN

Level 2: NEET standard

11. Nitration of toluene gives mainly (a) m-nitrotoluene (b) o- and p-nitrotoluene (c) only m- and p-nitrotoluene (d) nitrobenzene

12. Nitrobenzene reacts with Br₂ and FeBr₃ to give mainly (a) o-bromonitrobenzene (b) p-bromonitrobenzene (c) m-bromonitrobenzene (d) no product

13. Benzene reacts with 1-chloropropane and anhydrous AlCl₃ to give mainly (a) propylbenzene (b) isopropylbenzene (c) 1,3-dipropylbenzene (d) chlorobenzene

14. The correct order of reactivity towards electrophilic substitution is (a) phenol > toluene > benzene > nitrobenzene (b) nitrobenzene > benzene > toluene > phenol (c) toluene > phenol > nitrobenzene > benzene (d) benzene > phenol > toluene > nitrobenzene

15. The rate-determining step in electrophilic aromatic substitution is (a) formation of the electrophile (b) attack of the electrophile on the ring to form the σ-complex (c) loss of H⁺ from the σ-complex (d) attack of a nucleophile

16. Which compound does not undergo Friedel–Crafts alkylation? (a) Toluene (b) Benzene (c) Nitrobenzene (d) Methoxybenzene

17. In the nitrating mixture, concentrated H₂SO₄ (a) acts as an oxidising agent (b) dehydrates benzene (c) acts as a reducing agent (d) protonates HNO₃ and helps form NO₂⁺

18. Benzene treated with excess Cl₂ and anhydrous FeCl₃ in the dark finally gives (a) benzene hexachloride (b) chlorobenzene only (c) hexachlorobenzene (d) cyclohexyl chloride

19. The electrophile in the Friedel–Crafts acetylation of benzene is (a) CH₃⁺ (b) CH₃CO⁺ (c) Cl⁺ (d) CH₃COO⁻

20. –NO₂ is a meta director because it (a) withdraws electrons and lowers electron density more at ortho and para than at meta (b) raises electron density at meta (c) is very bulky (d) donates electrons by resonance

21. Which group activates the benzene ring most strongly? (a) –CH₃ (b) –Cl (c) –OH (d) –CHO

22. Nitration of chlorobenzene gives as the major product (a) 1-chloro-3-nitrobenzene (b) 1-chloro-4-nitrobenzene (c) only 1-chloro-2-nitrobenzene (d) nitrobenzene

Level 3: Challenge

23. The best sequence to prepare m-bromobenzenesulphonic acid from benzene is (a) bromination, then sulphonation (b) sulphonation, then bromination (c) either order gives the same product (d) neither order works

24. The best sequence to prepare 4-bromoacetophenone from benzene is (a) bromination, then Friedel–Crafts acylation (b) Friedel–Crafts acylation, then bromination (c) either order gives the same product (d) neither order works

25. 15.6 g of benzene is nitrated with 75% yield. The mass of nitrobenzene obtained is (a) 24.6 g (b) 18.45 g (c) 12.3 g (d) 16.2 g

26. In the σ-complex formed when E⁺ attacks benzene, the positive charge is spread over (a) only the carbon carrying E (b) all six carbons equally (c) the two carbons ortho and the one carbon para to the sp³ carbon (d) the two carbons meta to the sp³ carbon

27. Friedel–Crafts methylation of benzene tends to give polymethylated products because (a) toluene is more reactive than benzene (b) AlCl₃ is used in excess (c) CH₃⁺ rearranges (d) toluene is less reactive than benzene

28. The correct order of reactivity towards nitration is (a) C₆H₅NO₂ > C₆H₅Cl > C₆H₆ (b) C₆H₅Cl > C₆H₅CH₃ > C₆H₆ (c) C₆H₆ > C₆H₅CH₃ > C₆H₅NO₂ (d) C₆H₅CH₃ > C₆H₆ > C₆H₅Cl > C₆H₅NO₂

29. Assertion (A): Chlorobenzene undergoes electrophilic substitution more slowly than benzene but gives mainly ortho and para products. Reason (R): Chlorine withdraws electrons by its –I effect but donates its lone pair by +R effect, which stabilises the ortho/para σ-complexes. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Friedel–Crafts acylation does not give polyacylated products. Statement II: An acyl group attached to the ring activates it towards further substitution. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bSubstitution keeps aromaticity.
2cNitronium ion from HNO₃ + H₂SO₄.
3aLewis acid; water destroys it.
4bLewis acid gives Cl⁺; ring substitution.
5dStrong –I and –R.
6cPositive charge over three ring carbons.
7aElectron-poor sulphur of SO₃.
8bCH₃CO⁺ gives C₆H₅COCH₃.
9cO lone pair donates by +R.
10a–I lowers rate; +R sets o/p.
11b–CH₃ is an o/p director.
12c–NO₂ sends Br to meta.
13b1° cation rearranges to 2° (CH₃)₂CH⁺.
14a+R > +I > H > strong –R.
15bAromaticity is lost in this step.
16cRing too deactivated.
17dStronger acid protonates HNO₃, which loses water.
18cAll six H substituted: C₆Cl₆.
19bAcylium ion.
20aOrtho/para depleted more than meta.
21cStrong +R of –OH.
22bo/p director; para favoured by less crowding.
23b–SO₃H directs Br to meta; –Br would direct o/p.
24a–Br directs o/p; –COCH₃ would direct meta.
25b0.2 mol × 123 = 24.6 g; × 0.75 = 18.45 g.
26cResonance places + at o and p of the sp³ carbon.
27aAlkyl group activates the ring.
28dActivator > H > halogen > nitro.
29a–I sets rate, +R sets direction.
30cAcyl group deactivates the ring.

Chapter 7 revision sheet

One-page summary

  • Benzene's π cloud attracts electrophiles, but the ring keeps its aromaticity, so it substitutes rather than adds.

  • EAS has three steps: make E⁺; ring attacks E⁺ to form the σ-complex (arenium ion, slow, aromaticity lost); base removes H⁺ (fast, aromaticity restored).

  • Halogenation: X₂ with FeX₃ or AlCl₃ (Lewis acid) gives Cl⁺/Br⁺ equivalent; product C₆H₅X.

  • Nitration: conc. HNO₃ + conc. H₂SO₄ generate NO₂⁺; product nitrobenzene.

  • Sulphonation: fuming H₂SO₄ (SO₃) gives benzenesulphonic acid; it is reversible.

  • Friedel–Crafts alkylation: RCl + anhydrous AlCl₃ → R⁺; gives polyalkylation and carbocation rearrangement.

  • Friedel–Crafts acylation: RCOCl + AlCl₃ → RC≡O⁺; no rearrangement; ketone product deactivates ring, so only one acyl group goes in.

  • Friedel–Crafts fails on strongly deactivated rings (nitrobenzene) and on rings with –NH₂ (Lewis base binds AlCl₃).

  • o/p activators: –NH₂, –OH, –OCH₃, –NHCOCH₃ (+R), alkyl (+I, hyperconjugation).

  • o/p deactivators: halogens (–I wins for rate, +R decides position).

  • m deactivators: –NO₂, –CN, –CHO, –COR, –COOH, –SO₃H, –NR₃⁺, –CF₃.

  • Para often beats ortho for bulky groups; there are two ortho positions, so ortho can still be large for small groups.

  • In synthesis, the order of steps decides the isomer; put Friedel–Crafts before any strong deactivator.

  • Reactivity: phenol > toluene > benzene > chlorobenzene > nitrobenzene.

HNO3+2H2SO4⇌NO2++H3O++2HSO4−\mathrm{HNO_3 + 2H_2SO_4 \rightleftharpoons NO_2^+ + H_3O^+ + 2HSO_4^-}

Must-remember table

ReactionReagentElectrophileProduct from benzene
ChlorinationCl₂, anhydrous FeCl₃Cl⁺ (polarised Cl₂)Chlorobenzene
NitrationConc. HNO₃ + conc. H₂SO₄NO₂⁺Nitrobenzene
SulphonationFuming H₂SO₄SO₃Benzenesulphonic acid
F–C alkylationCH₃Cl, anhydrous AlCl₃CH₃⁺Toluene
F–C acylationCH₃COCl, anhydrous AlCl₃CH₃CO⁺Acetophenone

Memory aids

  • "E-S-H" (Electrophile made, Sigma complex slow, H⁺ lost fast): the three steps of EAS.

  • "Lone pair on the first atom → o/p; double bond to O or N on the first atom → meta": quick director check.

  • "Halogens are Half-good": o/p directing (good) but deactivating (bad).

  • "Acyl Arrives Alone": acylation stops at one group and never rearranges.

  • "First F–C, then Nitro": do Friedel–Crafts before adding a strong deactivator.

Concept connections

  • Inductive and resonance effects that decide directing power come from Chemistry Book 14: Some Basic Principles of Organic Chemistry.

  • Haloarenes, phenol and aniline reactions continue in Chemistry Book 16: Organic Compounds Containing Halogens, Chemistry Book 17: Organic Compounds Containing Oxygen and Chemistry Book 18: Organic Compounds Containing Nitrogen.

  • Lewis acids such as AlCl₃ and FeCl₃ link to Chemistry Book 10: p-Block Elements and Chemistry Book 6: Equilibrium.

Practice MCQs: Chapter 7, Level 4 (new NEET pattern)

31. Match the reaction (List I) with its attacking electrophile (List II).

List I

  • A. Nitration

  • B. Sulphonation

  • C. Friedel–Crafts acylation

  • D. Chlorination with FeCl₃

List II

  • (i) Cl⁺

  • (ii) RC≡O⁺

  • (iii) SO₃

  • (iv) NO₂⁺

(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-iv, C-ii, D-i (c) A-iv, B-ii, C-iii, D-i (d) A-i, B-iii, C-ii, D-iv

32. Match the substituent (List I) with its effect (List II).

List I

  • A. –OH

  • B. –Cl

  • C. –NO₂

  • D. –CH₃

List II

  • (i) Meta-directing, deactivating

  • (ii) o/p-directing, weakly activating by +I and hyperconjugation

  • (iii) o/p-directing, deactivating

  • (iv) o/p-directing, strongly activating by +R

(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-ii, D-i (c) A-iv, B-i, C-iii, D-ii (d) A-iv, B-iii, C-i, D-ii

33. Match the reaction (List I) with its major product (List II).

List I

  • A. Toluene + conc. HNO₃/H₂SO₄

  • B. Nitrobenzene + Br₂/FeBr₃

  • C. Benzene + CH₃COCl/AlCl₃

  • D. Benzene + CH₃Cl/AlCl₃

List II

  • (i) Toluene

  • (ii) 1-Bromo-3-nitrobenzene

  • (iii) Acetophenone

  • (iv) Mixture of 2- and 4-nitrotoluene

(a) A-iv, B-iii, C-ii, D-i (b) A-iv, B-ii, C-iii, D-i (c) A-ii, B-iv, C-iii, D-i (d) A-iv, B-ii, C-i, D-iii

34. Match List I with List II.

List I

  • A. Arenium ion (σ-complex)

  • B. Rate-determining step of EAS

  • C. Polyalkylation

  • D. Anhydrous AlCl₃

List II

  • (i) Attack of the ring π electrons on E⁺

  • (ii) Lewis acid that generates the electrophile

  • (iii) Intermediate in which aromaticity is lost

  • (iv) Drawback of Friedel–Crafts alkylation

(a) A-iii, B-iv, C-i, D-ii (b) A-i, B-iii, C-iv, D-ii (c) A-iii, B-i, C-iv, D-ii (d) A-iii, B-i, C-ii, D-iv

35. How many of the following groups are meta-directing?

  • A. –NO₂

  • B. –CHO

  • C. –COOH

  • D. –CN

  • E. –OCH₃

  • F. –Cl

  • G. –SO₃H

  • H. –NHCOCH₃

(a) 4 (b) 6 (c) 5 (d) 3

36. Choose the correct set of statements.

  • A. Halogens deactivate the ring because their –I effect outweighs their +R effect.

  • B. Halogens direct o/p because +R stabilises the σ-complex for o/p attack.

  • C. Chlorobenzene is nitrated faster than benzene.

  • D. Anisole is brominated faster than benzene.

(a) A, B and D only (b) A and C only (c) B, C and D only (d) A, B, C and D

37. How many of the following statements about Friedel–Crafts reactions are correct?

  • A. Nitrobenzene can serve as a solvent because it does not undergo Friedel–Crafts reactions.

  • B. The ketone formed by acylation resists a second acylation.

  • C. 1-Chloropropane with benzene and AlCl₃ gives mainly isopropylbenzene.

  • D. AlCl₃ must be anhydrous because water destroys it.

  • E. Aniline undergoes Friedel–Crafts alkylation easily.

(a) 3 (b) 5 (c) 2 (d) 4

38. Choose the correct set of statements.

  • A. Sulphonation of benzene is reversible.

  • B. In the nitrating mixture, H₂SO₄ protonates HNO₃ so that NO₂⁺ forms.

  • C. Loss of H⁺ from the σ-complex is the slowest step.

  • D. Nitration at a higher temperature can give 1,3-dinitrobenzene.

(a) A and C only (b) A, B and D only (c) B and C only (d) C and D only

39. Approximate relative rates of nitration (benzene = 1): toluene 25, benzene 1, chlorobenzene 0.03, nitrobenzene 6 × 10⁻⁸. Which conclusion is correct? (a) –NO₂ is a strong deactivator and –CH₃ is an activator (b) –Cl activates the ring (c) Toluene is nitrated more slowly than benzene (d) Chlorobenzene is nitrated faster than toluene

40. Nitration of toluene gives about 58% ortho, 4% meta and 38% para product. Which reading is correct? (a) –CH₃ is a meta director (b) About 96% goes o/p, so –CH₃ is o/p-directing; ortho is larger partly because there are two ortho positions (c) Para is always the major product of any o/p director (d) Meta is the major product

41. 15.6 g of benzene is nitrated with 80% yield. The mass of nitrobenzene obtained is about (a) 24.6 g (b) 12.3 g (c) 19.7 g (d) 15.6 g

Passage for Q42–43: A student must prepare two compounds from benzene: 1-bromo-3-nitrobenzene and 1-bromo-4-nitrobenzene. She has Br₂/FeBr₃ and a nitrating mixture, and can separate isomers if needed.

42. To make 1-bromo-3-nitrobenzene, she should (a) brominate first, then nitrate (b) use either order; both give the same product (c) sulphonate first, then brominate (d) nitrate first, then brominate with Br₂/FeBr₃

43. To make 1-bromo-4-nitrobenzene, she should (a) brominate first, then nitrate and separate the para isomer from the ortho (b) nitrate first, then brominate (c) nitrate twice, then brominate (d) brominate twice, then nitrate

44. Benzene with 1-chloropropane and AlCl₃ gives mainly isopropylbenzene, but benzene with propanoyl chloride and AlCl₃ (followed by reduction of C=O to CH₂) gives n-propylbenzene. The reason is (a) AlCl₃ is a Brønsted base in acylation (b) The acyl group adds at the meta position (c) The acylium ion is resonance-stabilised and does not rearrange, while the 1° propyl cation rearranges to the 2° cation by a hydride shift (d) Alkylation is reversible but acylation is not

45. The correct order of decreasing reactivity towards electrophilic substitution is (a) toluene > phenol > chlorobenzene > nitrobenzene (b) phenol > toluene > chlorobenzene > nitrobenzene (c) phenol > chlorobenzene > toluene > nitrobenzene (d) nitrobenzene > chlorobenzene > toluene > phenol

Level 4 answer key

QAnsReason
31aNO₂⁺, SO₃, acylium, Cl⁺
32d–OH +R activator; –Cl o/p deactivator; –NO₂ meta; –CH₃ weak activator
33b–CH₃ o/p; –NO₂ meta; acylation → ketone; methylation → toluene
34cσ-complex loses aromaticity; its formation is slow; polyalkylation; AlCl₃ Lewis acid
35c–NO₂, –CHO, –COOH, –CN, –SO₃H
36aChlorobenzene reacts slower than benzene
37dA–D true; –NH₂ binds AlCl₃ and deactivates the ring
38bFormation of the σ-complex is the slow step
39a25 > 1 > 0.03 > 6 × 10⁻⁸
40b58 + 38 = 96% o/p; two ortho sites vs one para
41c0.2 mol × 123 = 24.6 g × 0.8 = 19.68 g
42d–NO₂ sends Br to meta
43a–Br is o/p-directing; separate para from ortho
44cAcylium ion RC≡O⁺ is stable; 1° cation shifts to 2°
45b+R of –OH > +I of –CH₃; –Cl mild deactivator; –NO₂ strong deactivator
22 min left
‹
›