Chapter 3: Alkenes: Structure, Isomerism and Preparation
What you will learn
The bonding in C=C: one σ and one π bond, planar sp² carbons.
IUPAC names of alkenes and dienes.
Structural and geometrical (cis–trans) isomerism, with the condition for geometrical isomers.
How cis and trans isomers differ in dipole moment, boiling point and melting point.
Five ways to make alkenes, with Saytzeff's rule for elimination.
3.1 Structure of the double bond
Alkenes contain at least one C=C. Their general formula is CₙH₂ₙ. Old name: olefins ("oil-forming"), because ethene gives an oily liquid with chlorine.
Each carbon of C=C is sp² hybridised. The three sp² orbitals form σ bonds in one plane, 120° apart. The leftover p orbitals on the two carbons overlap sideways above and below that plane to form a π bond.
| Property | C–C (ethane) | C=C (ethene) |
|---|---|---|
| Bonds | one σ | one σ + one π |
| Hybridisation | sp³ | sp² |
| Bond length | 154 pm | 134 pm |
| Bond enthalpy | about 348 kJ/mol | about 681 kJ/mol |
| Bond angle | about 109.5° | about 120° |
| Rotation about the bond | free | restricted |
The π bond (about 681 − 348 = 333 kJ/mol) is weaker than the σ bond. Its electrons sit away from the nuclei and are easy to reach. So alkenes act as electron sources (nucleophiles) and react with electrophiles (Chapter 4).
Twisting one end of C=C would pull the p orbitals out of line and break the π bond. That is why rotation is restricted, and why geometrical isomers exist.
3.2 Naming alkenes
Choose the longest chain that contains the double bond.
Number from the end that gives the double bond the lowest locant.
Change "-ane" to "-ene" and place the locant of the first double-bond carbon before "-ene".
Two double bonds: "-diene", with an "a" added to the stem (buta-1,3-diene).
| Condensed formula | IUPAC name |
|---|---|
| CH₂=CH₂ | ethene |
| CH₃CH=CH₂ | propene |
| CH₃CH₂CH=CH₂ | but-1-ene |
| CH₃CH=CHCH₃ | but-2-ene |
| CH₂=C(CH₃)₂ | 2-methylpropene |
| CH₂=CH–CH=CH₂ | buta-1,3-diene |
| (CH₃)₂C=CHCH₃ | 2-methylbut-2-ene |
Worked example 3.1: Name CH₃CH=C(CH₃)CH₂CH₃ and say whether it shows geometrical isomerism.
Solution: The chain has five carbons with the double bond between C-2 and C-3 from the left. A methyl sits on C-3. Name: 3-methylpent-2-ene. C-2 carries H and CH₃ (different). C-3 carries CH₃ and C₂H₅ (different). So it shows geometrical isomerism.
3.3 Isomerism in alkenes
Structural isomerism. Alkenes show chain isomerism (different skeletons) and position isomerism (different place for C=C). Cycloalkanes with the same formula are ring-chain isomers.
For C₄H₈, the open-chain alkenes are but-1-ene, but-2-ene and 2-methylpropene: three structural isomers. But-2-ene has cis and trans forms, so there are four alkenes in all. Add cyclobutane and methylcyclopropane, and C₄H₈ has six isomers.
Geometrical isomerism. Because rotation about C=C is restricted, groups can be held on the same side or on opposite sides of the double bond.
cis: similar groups on the same side.
trans: similar groups on opposite sides.
The condition is simple. Each doubly bonded carbon must carry two different groups. If either carbon carries two identical groups, there is no geometrical isomerism.
| Alkene | Groups on C-a | Groups on C-b | Geometrical isomers? |
|---|---|---|---|
| CH₃CH=CHCH₃ | H, CH₃ | H, CH₃ | yes |
| CH₃CH₂CH=CH₂ | H, C₂H₅ | H, H | no |
| (CH₃)₂C=CH₂ | CH₃, CH₃ | H, H | no |
| (CH₃)₂C=CHCH₃ | CH₃, CH₃ | H, CH₃ | no |
| ClCH=CHCl | H, Cl | H, Cl | yes |
| Cl₂C=CH₂ | Cl, Cl | H, H | no |
For groups that are not "similar", chemists use E/Z: rank the two groups on each carbon by atomic number. Higher-ranked groups on the same side give Z; on opposite sides give E.
How cis and trans differ.
| Property | cis-1,2-Dichloroethene | trans-1,2-Dichloroethene | Reason |
|---|---|---|---|
| Dipole moment | about 1.9 D | 0 | In trans, the two C–Cl dipoles point opposite ways and cancel. |
| Boiling point | about 333 K | about 321 K | Polar cis has extra dipole–dipole attraction. |
| Melting point | lower | higher | Symmetrical trans packs better in the crystal. |
| Stability | less | more | In cis, the two big groups crowd each other. |
The same pattern holds for but-2-ene: cis boils a little higher (about 277 K vs 274 K), trans melts higher (about 167 K vs 134 K).
Worked example 3.2: Why does trans-1,2-dichloroethene have zero dipole moment while the cis form does not?
Solution: Each C–Cl bond has a dipole pointing towards Cl. In trans, the two dipoles are equal and point in opposite directions, so they cancel. In cis, both point to the same side and add up, giving about 1.9 D.
Worked example 3.3: How many alkene isomers, including geometrical isomers, have the formula C₅H₁₀?
Solution: Structural alkenes: pent-1-ene, pent-2-ene, 2-methylbut-1-ene, 3-methylbut-1-ene, 2-methylbut-2-ene. That is five. Only pent-2-ene has cis and trans forms. Total = 6.
3.4 Preparation of alkenes
(a) From alkynes: partial reduction. The reagent decides the geometry.
Lindlar's catalyst (Pd on CaCO₃, poisoned with quinoline or sulphur compounds) adds H₂ to one face and stops at the alkene. Product: cis-alkene.
Sodium in liquid ammonia (Birch-type reduction) gives the trans-alkene.
Pt, Pd or Ni with excess H₂ go all the way to the alkane.
(b) From alkyl halides: dehydrohalogenation. Heat the alkyl halide with alcoholic KOH. The base removes H from the β-carbon and the halogen leaves from the α-carbon. This is a β-elimination.
For a fixed alkyl group, reactivity is R–I > R–Br > R–Cl (weaker C–X bond breaks more easily). For a fixed halogen, 3° > 2° > 1°.
Aqueous KOH gives alcohols (substitution); alcoholic KOH gives alkenes (elimination). Remember "alc for alkene".
Saytzeff's rule. When elimination can give more than one alkene, the more substituted alkene (more alkyl groups on C=C) is the major product. More alkyl groups mean more hyperconjugation and a more stable alkene.
(c) From vicinal dihalides: dehalogenation. Two halogens on adjacent carbons are removed by zinc dust (in methanol or ethanol).
(d) From alcohols: acidic dehydration. Heat an alcohol with concentrated H₂SO₄ (or H₃PO₄). Ethanol needs about 443 K. At about 413 K with excess ethanol, diethyl ether forms instead.
Mechanism in three steps:
The acid protonates the –OH, turning it into –OH₂⁺, a good leaving group.
Water leaves, giving a carbocation.
A β-hydrogen is lost as H⁺, forming C=C.
Ease of dehydration follows carbocation stability: 3° > 2° > 1°. A 3° alcohol dehydrates with dilute acid at about 358 K. Because a carbocation is formed, it may rearrange (hydride or methyl shift) to a more stable carbocation before losing H⁺. Saytzeff's rule again decides the major alkene.
Reaction map: making alkenes
| Starting material | Reagent and condition | Product | Key point |
|---|---|---|---|
| R–C≡C–R | H₂, Lindlar's catalyst | cis-alkene | stops at alkene |
| R–C≡C–R | Na, liquid NH₃ | trans-alkene | stops at alkene |
| Alkyl halide | alcoholic KOH, heat | alkene + KX + H₂O | β-elimination, Saytzeff |
| Vicinal dihalide | Zn dust, CH₃OH | alkene + ZnX₂ | dehalogenation |
| Alcohol | conc. H₂SO₄, 443 K (for ethanol) | alkene + H₂O | carbocation, may rearrange |
| Alcohol | Al₂O₃, about 633 K | alkene + H₂O | vapour-phase dehydration |
Worked example 3.4: 2-Bromo-2-methylbutane is heated with alcoholic KOH. Give the two possible alkenes and the major one.
Solution: The bromide is (CH₃)₂CBrCH₂CH₃. Removing H from a CH₃ on C-2 gives CH₂=C(CH₃)CH₂CH₃, 2-methylbut-1-ene (two alkyl groups on C=C). Removing H from C-3 gives (CH₃)₂C=CHCH₃, 2-methylbut-2-ene (three alkyl groups). By Saytzeff, 2-methylbut-2-ene is major.
Worked example 3.5: But-2-yne is reduced (i) with H₂ and Lindlar's catalyst, (ii) with Na in liquid NH₃. Name the products.
Solution: (i) cis-But-2-ene. (ii) trans-But-2-ene. Both have the same formula, C₄H₈, but are geometrical isomers.
Worked example 3.6: 3,3-Dimethylbutan-2-ol, (CH₃)₃CCH(OH)CH₃, is heated with conc. H₂SO₄. Predict the major alkene.
Solution: Loss of water gives a 2° carbocation on C-2: (CH₃)₃C–C⁺HCH₃. A methyl group shifts from C-3 to C-2, giving the more stable 3° carbocation (CH₃)₂C⁺–CH(CH₃)₂. Loss of H⁺ from the neighbouring CH gives (CH₃)₂C=C(CH₃)₂, 2,3-dimethylbut-2-ene. It has four alkyl groups on C=C, so Saytzeff favours it strongly.
Worked example 3.7: 1,2-Dibromopropane is warmed with zinc dust in methanol. What forms?
Solution: Both Br atoms leave as ZnBr₂, and a double bond forms between C-1 and C-2. The product is propene, CH₃CH=CH₂.
3.5 Physical properties of alkenes
Alkenes are similar to alkanes in physical properties. Ethene to butenes are gases at room temperature, C₅ to C₁₇ are liquids and higher ones are solids. Ethene is a colourless gas with a faint sweet smell; it is the gas that ripens bananas and mangoes in a closed box.
Alkenes are insoluble in water and soluble in non-polar solvents. Boiling points rise with chain length and fall with branching, as for alkanes.
Quick revision
C=C = one σ + one π bond; sp² carbons; planar; 134 pm; rotation restricted.
Number the chain to give C=C the lowest locant: CH₃CH₂CH=CH₂ is but-1-ene.
Geometrical isomerism needs two different groups on each doubly bonded carbon.
cis: higher dipole moment and boiling point. trans: higher melting point and stability.
Lindlar's catalyst gives cis-alkenes; Na in liquid NH₃ gives trans-alkenes.
Alcoholic KOH eliminates HX; Saytzeff: the more substituted alkene is major.
Zn dust removes two halogens from vicinal dihalides.
Acid dehydration goes through a carbocation: ease 3° > 2° > 1°, and rearrangement is possible.
NEET traps
But-1-ene and 2-methylpropene do not show geometrical isomerism; students often tick them.
Aqueous KOH gives alcohol, not alkene. Only alcoholic KOH favours elimination.
Ethanol with conc. H₂SO₄ at 413 K gives diethyl ether, not ethene. Ethene needs about 443 K.
In acid dehydration, check for a methyl or hydride shift before writing the product.
The trans isomer has the higher melting point but the lower boiling point. Do not mix the two.
Lindlar gives cis, sodium/ammonia gives trans. Swapping them is the most common error.
Practice MCQs: Chapter 3
Level 1: Concept check
1. The hybridisation of the carbons of a C=C bond is (a) sp³ (b) sp² (c) sp (d) sp³d
2. The C=C bond length in ethene is about (a) 154 pm (b) 120 pm (c) 134 pm (d) 139 pm
3. A carbon–carbon double bond consists of (a) one σ and one π bond (b) two σ bonds (c) two π bonds (d) one σ and two π bonds
4. The IUPAC name of CH₂=C(CH₃)₂ is (a) but-1-ene (b) 1,1-dimethylethene (c) isobutane (d) 2-methylpropene
5. Which alkene shows geometrical isomerism? (a) Propene (b) But-1-ene (c) But-2-ene (d) 2-Methylpropene
6. Lindlar's catalyst reduces an internal alkyne to (a) a cis-alkene (b) a trans-alkene (c) an alkane (d) an alcohol
7. Ethanol is converted into ethene by conc. H₂SO₄ at about (a) 273 K (b) 413 K (c) 443 K (d) 373 K
8. The reagent used for dehydrohalogenation of alkyl halides is (a) aqueous KOH (b) alcoholic KOH (c) Zn and HCl (d) Na in dry ether
9. A vicinal dibromide heated with zinc dust gives (a) an alkyne (b) an alkane (c) an alkene (d) an alcohol
10. Which is more stable? (a) cis-But-2-ene (b) trans-But-2-ene (c) Both equally (d) But-1-ene is more stable than both
Level 2: NEET standard
11. The number of structural isomers of open-chain alkenes with formula C₄H₈ (not counting geometrical isomers) is (a) 2 (b) 3 (c) 4 (d) 5
12. The major product of 2-bromobutane with hot alcoholic KOH is (a) butan-2-ol (b) but-1-ene (c) butane (d) but-2-ene
13. Which has zero dipole moment? (a) cis-1,2-Dichloroethene (b) trans-1,2-Dichloroethene (c) 1,1-Dichloroethene (d) Chloroethene
14. Which 1,2-dichloroethene has the higher boiling point, and why? (a) cis, because it is polar (b) trans, because it is non-polar (c) Both equal, same mass (d) trans, because it packs better
15. Pent-2-yne treated with sodium in liquid ammonia gives (a) cis-pent-2-ene (b) trans-pent-2-ene (c) pentane (d) pent-1-ene
16. The ease of acid-catalysed dehydration of alcohols is (a) 1° > 2° > 3° (b) 2° > 3° > 1° (c) 3° > 2° > 1° (d) all equal
17. Which cannot show geometrical isomerism? (a) Pent-2-ene (b) 1,2-Dichloroethene (c) 2-Methylbut-2-ene (d) Hex-3-ene
18. The IUPAC name of CH₃CH₂CH(CH₃)CH=CH₂ is (a) 3-methylpent-1-ene (b) 3-methylpent-4-ene (c) 2-ethylbut-3-ene (d) 3-ethylbut-1-ene
19. According to Saytzeff's rule, the major alkene from an elimination is the one that (a) is less substituted (b) is more substituted (c) has a terminal double bond (d) is always cis
20. 1,2-Dibromopropane warmed with zinc dust in methanol gives (a) propyne (b) propane (c) propene (d) cyclopropane
21. For dehydrohalogenation with the same alkyl group, the reactivity order is (a) R–I > R–Br > R–Cl (b) R–Cl > R–Br > R–I (c) R–Br > R–I > R–Cl (d) all equal
22. The total number of open-chain alkenes of formula C₅H₁₀, including geometrical isomers, is (a) 5 (b) 6 (c) 7 (d) 4
Level 3: Challenge
23. 3,3-Dimethylbutan-2-ol is heated with conc. H₂SO₄. The major product is (a) 3,3-dimethylbut-1-ene (b) 2,3-dimethylbut-2-ene (c) 2,3-dimethylbut-1-ene (d) 2-methylpent-2-ene
24. 2-Bromo-2-methylbutane with alcoholic KOH can give how many structural alkenes, and which is major? (a) 2; 2-methylbut-2-ene (b) 3; 3-methylbut-1-ene (c) 2; 2-methylbut-1-ene (d) 1; 2-methylbut-2-ene
25. The total number of isomers (structural and geometrical, open-chain and cyclic) with formula C₄H₈ is (a) 4 (b) 5 (c) 6 (d) 7
26. trans-But-2-ene melts at a higher temperature than cis-but-2-ene because the trans isomer (a) packs better in the crystal lattice (b) is more polar (c) forms hydrogen bonds (d) has a higher molar mass
27. Acid-catalysed dehydration of 3-methylbutan-2-ol gives mainly (a) 3-methylbut-1-ene (b) 2-methylbut-2-ene (c) 2-methylbut-1-ene (d) pent-2-ene
28. Which alkyl halide gives, as the major product with alcoholic KOH, an alkene that shows geometrical isomerism? (a) 1-Bromopropane (b) 2-Bromo-2-methylpropane (c) 2-Bromopentane (d) Bromoethane
29. Assertion (A): But-1-ene does not show geometrical isomerism. Reason (R): C-1 of but-1-ene carries two identical hydrogen atoms. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: Dehydrohalogenation of alkyl halides is a β-elimination reaction. Statement II: The Saytzeff product carries fewer alkyl groups on the double bond than the other possible alkene. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | b | Three σ bonds in a plane plus one p orbital. |
| 2 | c | C=C is shorter than C–C (154 pm). |
| 3 | a | Head-on σ plus sideways π. |
| 4 | d | Three-carbon chain, methyl on C-2, C=C at C-1. |
| 5 | c | Each C of C=C carries H and CH₃. |
| 6 | a | Poisoned Pd adds H₂ to one face. |
| 7 | c | 443 K for alkene; 413 K gives ether. |
| 8 | b | Alcoholic KOH favours elimination. |
| 9 | c | Zn removes both halogens as ZnX₂. |
| 10 | b | Less crowding of methyl groups in trans. |
| 11 | b | But-1-ene, but-2-ene, 2-methylpropene. |
| 12 | d | More substituted alkene (Saytzeff). |
| 13 | b | Opposite C–Cl dipoles cancel. |
| 14 | a | Dipole–dipole forces raise bp of cis. |
| 15 | b | Dissolving-metal reduction gives trans. |
| 16 | c | Follows carbocation stability. |
| 17 | c | C-2 carries two CH₃ groups. |
| 18 | a | Number from the CH=CH₂ end; methyl on C-3. |
| 19 | b | More alkyl groups, more stable alkene. |
| 20 | c | Dehalogenation of vicinal dibromide. |
| 21 | a | C–I is the weakest C–X bond. |
| 22 | b | Five structural + one extra from cis/trans pent-2-ene. |
| 23 | b | Methyl shift to 3° cation, then tetrasubstituted alkene. |
| 24 | a | 2-Methylbut-1-ene and 2-methylbut-2-ene; trisubstituted is major. |
| 25 | c | Four alkenes + cyclobutane + methylcyclopropane. |
| 26 | a | Symmetry gives better packing. |
| 27 | b | Hydride shift gives a 3° cation, then the trisubstituted alkene. |
| 28 | c | Gives pent-2-ene (cis and trans) as major. |
| 29 | a | Identical groups on one carbon rule out cis/trans. |
| 30 | c | Saytzeff product has more alkyl groups. |
Chapter 3 revision sheet
One-page summary
Alkenes CₙH₂ₙ contain C=C: one σ bond (sp²–sp²) plus one π bond (sideways p–p overlap).
sp² carbons, planar, bond angles about 120°; C=C is 134 pm, shorter than C–C (154 pm).
The π bond is weaker than the σ bond and its electrons are exposed, so alkenes are reactive.
Rotation about C=C needs the π bond to break, so cis and trans forms are separate compounds.
Naming: longest chain containing C=C, lowest locant to the double bond, suffix -ene.
Geometrical isomerism needs two different groups on each doubly bonded carbon.
cis: higher dipole moment and boiling point. trans: higher melting point (better packing) and greater stability.
Alkynes → alkenes: Lindlar's catalyst (Pd on BaSO₄/CaCO₃, quinoline) gives cis; Na in liquid NH₃ gives trans.
Dehydrohalogenation: alcoholic KOH removes HX (β-elimination); ease RI > RBr > RCl and 3° > 2° > 1°.
Saytzeff: the more substituted alkene (more alkyl groups on C=C) is the major product.
Dehalogenation: Zn dust removes two halogens from a vicinal dihalide.
Acid dehydration of alcohols (conc. H₂SO₄, heat) goes through a carbocation; ease 3° > 2° > 1°; shifts can occur.
Ethanol → ethene needs conc. H₂SO₄ at about 443 K.
Alkenes are insoluble in water and burn with a sooty, luminous flame.
Must-remember table
| Starting material | Reagent | Product |
|---|---|---|
| Alkyne | H₂, Lindlar's catalyst | cis-alkene |
| Alkyne | Na, liquid NH₃ | trans-alkene |
| Haloalkane | Alcoholic KOH, heat | Alkene (Saytzeff major) |
| Vicinal dihalide | Zn dust | Alkene |
| Alcohol | Conc. H₂SO₄ or H₃PO₄, heat | Alkene (via carbocation) |
| C=C bond length | — | 134 pm |
| C=C bond | — | 1 σ + 1 π |
Memory aids
"Lindlar Leaves them Linked (cis); Sodium Splits them (trans)": Lindlar's H₂ adds from one face; Na/NH₃ puts the H atoms on opposite sides.
"Saytzeff = Substituted Stays": the alkene with more substituents stays as the main product.
"Cis Climbs (bp), Trans Tightly packs (mp)": cis has higher boiling point; trans has higher melting point.
"Alcoholic Away, Aqueous Attach": alcoholic KOH takes HX away (elimination); aqueous KOH attaches OH (substitution).
"Two Different on Each": geometrical isomerism needs two different groups on each C of C=C.
Concept connections
Hybridisation, σ and π bonds and dipole moment come from Chemistry Book 3: Chemical Bonding and Molecular Structure.
Elimination from haloalkanes and alcohols continues in Chemistry Book 16: Organic Compounds Containing Halogens and Chemistry Book 17: Organic Compounds Containing Oxygen.
Carbocation stability and hyperconjugation come from Chemistry Book 14: Some Basic Principles of Organic Chemistry.
Practice MCQs: Chapter 3, Level 4 (new NEET pattern)
31. Match the reaction (List I) with the main product (List II).
List I
A. But-2-yne + H₂, Lindlar's catalyst
B. But-2-yne + Na in liquid NH₃
C. 2-Bromo-2-methylbutane + alcoholic KOH, heat
D. 1,2-Dibromopropane + Zn dust
List II
(i) Propene
(ii) trans-But-2-ene
(iii) 2-Methylbut-2-ene
(iv) cis-But-2-ene
(a) A-ii, B-iv, C-iii, D-i (b) A-iv, B-ii, C-i, D-iii (c) A-iv, B-iii, C-ii, D-i (d) A-iv, B-ii, C-iii, D-i
32. Match the description (List I) with the compound (List II).
List I
A. The but-2-ene isomer with the higher dipole moment
B. The but-2-ene isomer with the higher melting point
C. The 1,2-dichloroethene isomer with zero dipole moment
D. A C₄H₈ alkene that shows no geometrical isomerism
List II
(i) trans-1,2-Dichloroethene
(ii) cis-But-2-ene
(iii) 2-Methylpropene
(iv) trans-But-2-ene
(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-i, C-iv, D-iii (d) A-iii, B-iv, C-i, D-ii
33. Match the structure (List I) with its IUPAC name (List II).
List I
A. CH₂=CHCH₂CH₃
B. (CH₃)₂C=CH₂
C. CH₃CH=C(CH₃)CH₂CH₃
D. CH₂=CH–CH=CH₂
List II
(i) 3-Methylpent-2-ene
(ii) Buta-1,3-diene
(iii) But-1-ene
(iv) 2-Methylpropene
(a) A-iii, B-i, C-iv, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-iv, B-iii, C-i, D-ii (d) A-iii, B-iv, C-ii, D-i
34. Match the reaction type (List I) with its example (List II).
List I
A. Dehydrohalogenation
B. Dehydration
C. Dehalogenation
D. Partial reduction
List II
(i) BrCH₂CH₂Br + Zn
(ii) HC≡CH + H₂, Lindlar's catalyst
(iii) C₂H₅OH + conc. H₂SO₄, 443 K
(iv) C₂H₅Br + alcoholic KOH
(a) A-iv, B-i, C-iii, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-iv, B-iii, C-i, D-ii (d) A-iv, B-iii, C-ii, D-i
35. How many of the following show geometrical isomerism?
A. But-2-ene
B. Propene
C. Pent-2-ene
D. 2-Methylbut-2-ene
E. 1,2-Dichloroethene
F. 1,1-Dichloroethene
(a) 2 (b) 4 (c) 5 (d) 3
36. Choose the correct set of statements about ethene.
A. The C=C bond (134 pm) is shorter than the C–C bond in ethane (154 pm).
B. The π bond is stronger than the σ bond in C=C.
C. Rotation about C=C requires the π bond to break.
D. All six atoms lie in one plane.
(a) A, C and D only (b) A and B only (c) B, C and D only (d) C and D only
37. How many of the following statements about acid dehydration of alcohols are correct?
A. The ease of dehydration is 3° > 2° > 1° alcohol.
B. The reaction goes through a carbocation.
C. 2-Methylpropan-2-ol dehydrates more easily than butan-1-ol.
D. Ethanol needs milder conditions than 2-methylpropan-2-ol.
(a) 2 (b) 4 (c) 3 (d) 1
38. Choose the correct set of statements.
A. Alcoholic KOH favours elimination; aqueous KOH favours substitution.
B. The Saytzeff product from 2-bromobutane is but-1-ene.
C. For the same alkyl group, ease of dehydrohalogenation is RI > RBr > RCl.
D. 1° haloalkanes undergo dehydrohalogenation more readily than 3° haloalkanes.
(a) A, B and C only (b) B and D only (c) A and D only (d) A and C only
39. A table lists enthalpies of hydrogenation (kJ/mol): ethene −137, propene −126, cis-but-2-ene −120, trans-but-2-ene −116. Which conclusion is correct? (a) Ethene is the most stable because it releases the most heat (b) trans-But-2-ene is more stable than cis-but-2-ene by about 4 kJ/mol (c) Alkyl groups on C=C make an alkene less stable (d) cis- and trans-but-2-ene are equally stable
40. Data: cis-1,2-dichloroethene has dipole moment 1.9 D and boiling point 333 K; the trans isomer has 0 D and 322 K. The boiling point difference is best explained by (a) hydrogen bonding in the trans isomer (b) the larger molar mass of the cis isomer (c) the cis isomer being polar, so dipole–dipole attractions add to London forces (d) the trans isomer not being planar
41. Elimination of HBr from 2-bromobutane with alcoholic KOH gives about 80% but-2-ene and 20% but-1-ene. This ratio is explained by (a) Saytzeff's rule: the more substituted alkene is more stable and forms faster (b) Markovnikov's rule (c) the peroxide effect (d) but-1-ene being the more stable alkene
Passage for Q42–43: Riya heats 3,3-dimethylbutan-2-ol, CH₃CH(OH)C(CH₃)₃, with concentrated H₂SO₄. She expects 3,3-dimethylbut-1-ene, but the gas chromatogram shows a different main alkene.
42. The first carbocation formed after loss of water is (a) 1° (b) 2° (c) 3° (d) none; the reaction is concerted
43. The major alkene she obtains is (a) 3,3-Dimethylbut-1-ene (b) 2,3-Dimethylbut-1-ene (c) 2-Methylpent-2-ene (d) 2,3-Dimethylbut-2-ene
44. The total number of alkenes of formula C₅H₁₀, counting geometrical isomers separately, is (a) 5 (b) 6 (c) 7 (d) 4
45. An alkyne C₄H₆ that gives no precipitate with ammoniacal AgNO₃ is reduced with Na in liquid NH₃ to an alkene Y with zero dipole moment. Y is (a) cis-But-2-ene (b) But-1-ene (c) trans-But-2-ene (d) 2-Methylpropene
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | d | Lindlar → cis; Na/NH₃ → trans; Saytzeff → 2-methylbut-2-ene; Zn → propene |
| 32 | a | cis more polar; trans packs better; trans-ClCH=CHCl dipoles cancel; (CH₃)₂C=CH₂ has two CH₃ on one carbon |
| 33 | b | Lowest locant to C=C in each chain |
| 34 | c | Each reaction removes HX, H₂O or X₂, or adds one H₂ to an alkyne |
| 35 | d | A, C and E; B, D, F have two identical groups on one carbon |
| 36 | a | The π bond is weaker than the σ bond |
| 37 | c | A, B, C true; ethanol needs the harshest conditions |
| 38 | d | Saytzeff gives but-2-ene; 3° eliminates fastest |
| 39 | b | Less heat released = more stable; −116 vs −120 |
| 40 | c | Only the cis isomer has a net dipole |
| 41 | a | But-2-ene is disubstituted, more hyperconjugation, more stable |
| 42 | b | Loss of H₂O from C-2 leaves a 2° cation |
| 43 | d | Methyl shift gives a 3° cation; loss of H gives tetrasubstituted (CH₃)₂C=C(CH₃)₂ |
| 44 | b | Pent-1-ene, cis- and trans-pent-2-ene, 2-methylbut-1-ene, 3-methylbut-1-ene, 2-methylbut-2-ene |
| 45 | c | Internal alkyne but-2-yne; Na/NH₃ gives the trans alkene |