Chapter 3 of 11 · 23 min read

Chapter 1: Classification and Alkanes: Preparation and Properties

What you will learn

  • How hydrocarbons are classified, and the general formula of each family.

  • Chain isomerism and IUPAC names of alkanes, and 1°, 2°, 3°, 4° carbons.

  • Four ways to make alkanes: hydrogenation, reduction of alkyl halides, Wurtz reaction, decarboxylation and Kolbe electrolysis.

  • Why boiling point rises with chain length and falls with branching.

  • Combustion, controlled oxidation, isomerisation, aromatisation and steam reforming of alkanes.

1.1 What a hydrocarbon is

A hydrocarbon contains only carbon and hydrogen. LPG in your kitchen cylinder (propane and butane), CNG in an auto-rickshaw (mostly methane) and petrol are all hydrocarbon mixtures.

Hydrocarbons are sorted by the bonds between carbon atoms and by whether the chain closes into a ring.

FamilyC–C bond typeGeneral formulaCarbon hybridisationExample
Alkaneall singleCₙH₂ₙ₊₂sp³CH₃CH₃, ethane
Alkeneone doubleCₙH₂ₙsp² at C=CCH₂=CH₂, ethene
Alkyneone tripleCₙH₂ₙ₋₂sp at C≡CHC≡CH, ethyne
Cycloalkanesingle, ringCₙH₂ₙsp³cyclohexane, C₆H₁₂
Aromatic (arene)delocalised ringvariessp²benzene, C₆H₆

Alkanes are called saturated: every carbon holds the most hydrogen it can. Alkenes and alkynes are unsaturated. Their π bonds make them far more reactive. Alkanes are also called paraffins (Latin: little affinity) because they react only under harsh conditions.

Notice that an alkene and a cycloalkane with the same n share the formula CₙH₂ₙ. Propene and cyclopropane are both C₃H₆. They are ring-chain isomers.

1.2 Structure of alkanes

Each carbon in an alkane is sp³ hybridised. Its four bonds point to the corners of a tetrahedron, with bond angles close to 109.5°. The C–C bond length is about 154 pm.

A long alkane chain is not straight. It zig-zags, because each carbon keeps its tetrahedral angle. All bonds are σ bonds, so groups can rotate about each C–C bond (Chapter 2).

Each new member of the series adds one CH₂ unit. Such a family is a homologous series: same general formula, similar chemistry, steadily changing physical properties.

1.3 Isomerism and naming

From butane onwards, the same formula can give more than one carbon skeleton. These are chain isomers.

FormulaNumber of chain isomersNames
C₄H₁₀2butane, 2-methylpropane (isobutane)
C₅H₁₂3pentane, 2-methylbutane (isopentane), 2,2-dimethylpropane (neopentane)
C₆H₁₄5hexane, 2-methylpentane, 3-methylpentane, 2,2-dimethylbutane, 2,3-dimethylbutane
C₇H₁₆9heptane and eight branched isomers

Degree of a carbon. Count how many other carbons a carbon is bonded to.

  • Primary (1°): bonded to one carbon (a CH₃ at the chain end).

  • Secondary (2°): bonded to two carbons.

  • Tertiary (3°): bonded to three carbons.

  • Quaternary (4°): bonded to four carbons.

Hydrogens take the degree of the carbon they sit on. Neopentane has twelve 1° hydrogens and no others. This fact matters in Chapter 2.

IUPAC naming in short. Pick the longest chain. Number it so substituents get the lowest locants. List substituents alphabetically, with di, tri, tetra for repeats. So (CH₃)₂CHCH₂CH₃ is 2-methylbutane, not 3-methylbutane.

Worked example 1.1: An alkane has 16 hydrogen atoms. Find its formula, molar mass and name if it is unbranched.

Solution: 2n + 2 = 16 gives n = 7. The formula is C₇H₁₆. Molar mass = 7 × 12 + 16 × 1 = 100 g/mol. The straight-chain alkane is heptane.

Worked example 1.2: Count the 1°, 2°, 3° and 4° carbons in 2,2,4-trimethylpentane, (CH₃)₃CCH₂CH(CH₃)CH₃. This is the "iso-octane" used to rate petrol.

Solution: Five CH₃ groups are 1°. The CH₂ is 2°. The CH is 3°. The carbon carrying three methyls is 4°. Answer: 5, 1, 1, 1.

1.4 Preparation of alkanes

There are four routes NEET asks about. Learn the reagent, the product and the change in carbon count for each.

(a) From alkenes and alkynes: catalytic hydrogenation. Hydrogen adds across the multiple bond on a finely divided metal surface. Pt and Pd work at room temperature. Nickel needs 523–573 K (the Sabatier–Senderens method).

CH3CH=CH2+H2→Pt/Pd/NiCH3CH2CH3\mathrm{CH_3CH{=}CH_2 + H_2 \xrightarrow{Pt/Pd/Ni} CH_3CH_2CH_3}
HC≡CH+2H2→Pt/Pd/NiCH3CH3\mathrm{HC{\equiv}CH + 2H_2 \xrightarrow{Pt/Pd/Ni} CH_3CH_3}

The carbon skeleton does not change.

(b) From alkyl halides: reduction. Zinc and dilute HCl supply hydrogen that replaces the halogen. Fluorides do not react this way.

CH3CH2Cl+H2→Zn, H+CH3CH3+HCl\mathrm{CH_3CH_2Cl + H_2 \xrightarrow{Zn,\ H^+} CH_3CH_3 + HCl}

(c) From alkyl halides: Wurtz reaction. Two alkyl groups join when an alkyl halide is treated with sodium in dry ether. The product has twice the carbons of R.

2RX+2Na→dry etherR−R+2NaX\mathrm{2RX + 2Na \xrightarrow{dry\ ether} R{-}R + 2NaX}

Three points NEET tests:

  • Wurtz gives symmetrical alkanes with an even number of carbons from one halide.

  • Methane cannot be made by Wurtz. The smallest product is ethane (from CH₃X).

  • Two different halides (RX + R′X) give three products: R–R, R–R′ and R′–R′. These are hard to separate, so mixed Wurtz is a poor method for odd-carbon alkanes.

Dry ether is used because sodium reacts with water.

(d) From carboxylic acids: decarboxylation. Heat the sodium salt with soda lime (NaOH + CaO). The –COONa group leaves as Na₂CO₃ and is replaced by H. The alkane has one carbon fewer than the acid.

RCOONa+NaOH→ΔCaOR−H+Na2CO3\mathrm{RCOONa + NaOH \xrightarrow[\Delta]{CaO} R{-}H + Na_2CO_3}

Sodium ethanoate gives methane. Sodium propanoate gives ethane. CaO keeps the NaOH dry and stops it attacking glass.

(e) From carboxylic acids: Kolbe electrolysis. Electrolyse a concentrated aqueous solution of the sodium or potassium salt.

2RCOONa+2H2O→electrolysisR−R+2CO2+H2+2NaOH\mathrm{2RCOONa + 2H_2O \xrightarrow{electrolysis} R{-}R + 2CO_2 + H_2 + 2NaOH}

At the anode, RCOO⁻ loses an electron. The radical RCOO· loses CO₂ to give R·, and two R· join to give R–R. So the alkane and CO₂ both appear at the anode. Water is reduced at the cathode, giving H₂ and OH⁻, so the solution turns alkaline.

Kolbe, like Wurtz, gives an alkane with an even number of carbons. Methane cannot be made by Kolbe.

Reaction map: making alkanes

Starting materialReagent and conditionProductChange in carbon count
Alkene or alkyneH₂, Pt/Pd (room temp) or Ni (523–573 K)Alkanenone
R–X (X = Cl, Br, I)Zn + dilute HClR–Hnone
R–XNa, dry ether (Wurtz)R–Rdoubles
RCOONaNaOH + CaO, heatR–Hone fewer
RCOONa (aqueous)electrolysis (Kolbe)R–R at anode2 × (acid carbons − 1)

Worked example 1.3: Bromoethane is treated with sodium in dry ether. Name the product.

Solution: R = CH₃CH₂. The product R–R is CH₃CH₂CH₂CH₃, butane.

Worked example 1.4: A mixture of bromomethane and bromoethane undergoes Wurtz reaction. List all alkanes formed.

Solution: CH₃–CH₃ (ethane), CH₃–CH₂CH₃ (propane) and CH₃CH₂–CH₂CH₃ (butane). Three alkanes form together. This is why mixed Wurtz is avoided.

Worked example 1.5: Which alkane forms when sodium butanoate is heated with soda lime? Which forms when the same salt is electrolysed?

Solution: Sodium butanoate is CH₃CH₂CH₂COONa, so R = CH₃CH₂CH₂ (propyl). Soda lime gives R–H, which is propane. Kolbe gives R–R, which is hexane. Hexane forms at the anode with CO₂; H₂ forms at the cathode.

1.5 Physical properties

Alkanes are almost non-polar. C and H have close electronegativities, and the tetrahedral shape cancels small bond dipoles. The only forces between molecules are weak van der Waals (London) forces.

State at 298 K. C₁ to C₄ are gases. C₅ to C₁₇ are liquids. C₁₈ and above are waxy solids (candle wax is a mixture of these).

Boiling point. Two rules decide it.

  1. Longer chain, higher boiling point. More electrons and more surface give stronger London forces.

  2. More branching, lower boiling point. A branched molecule is more compact, nearly spherical, with less surface for contact.

Isomer of C₅H₁₂ShapeBoiling point (K)Melting point (K)
Pentanelong chain309143
2-Methylbutaneone branch301113
2,2-Dimethylpropanenear-spherical282.5257

Think of cooked noodles against a bowl of marbles. Noodles touch along their length and tangle. Marbles touch only at points.

Melting point depends also on how well molecules pack in a crystal. Symmetrical neopentane packs very well, so it melts far higher than pentane even though it boils lower. Straight-chain alkanes with an even number of carbons pack slightly better than odd ones, so their melting points rise in a small zig-zag.

Solubility. "Like dissolves like." Alkanes dissolve in non-polar solvents (benzene, ether, CCl₄) and not in water. Petrol floats on water because it is less dense and does not mix.

Worked example 1.6: Arrange in increasing order of boiling point: hexane, 2-methylpentane, 2,2-dimethylbutane.

Solution: All are C₆H₁₄, so only branching differs. More branching means a lower boiling point. Order: 2,2-dimethylbutane (323 K) less than 2-methylpentane (333 K) less than hexane (342 K).

1.6 Chemical properties of alkanes

Alkanes are inert to acids, bases and most oxidising agents at room temperature. Under the right conditions they show the following reactions. Substitution by halogen is covered in Chapter 2.

Combustion. Alkanes burn in excess air to CO₂ and water, releasing a lot of heat. This is why LPG and CNG are fuels.

CnH2n+2+3n+12O2→nCO2+(n+1)H2O\mathrm{C_nH_{2n+2} + \frac{3n+1}{2}O_2 \rightarrow nCO_2 + (n+1)H_2O}

For methane, ΔcH ≈ −890 kJ/mol. With too little air, carbon black (soot) and CO form. A blue LPG flame means good air supply; a yellow sooty flame means poor supply.

Controlled oxidation. With limited oxygen and a catalyst, alkanes give useful products.

Isomerisation. Straight-chain alkanes rearrange to branched ones with anhydrous AlCl₃ and HCl. Hexane gives 2-methylpentane and 3-methylpentane.

Aromatisation. Alkanes with six or more carbons cyclise and lose hydrogen at 773 K and 10–20 atm over oxides of V, Mo or Cr on alumina. Hexane gives benzene; heptane gives toluene.

Reaction with steam. Methane and steam over nickel at about 1273 K give CO and H₂ (synthesis gas). This is how hydrogen is made industrially.

Pyrolysis (cracking). Strong heating without air breaks long alkanes into smaller alkanes and alkenes. Refineries crack heavy oil to get more petrol.

Reaction map: reactions of alkanes

AlkaneReagent and conditionProduct
CH₄O₂, Cu, 523 K, 100 atmCH₃OH (methanol)
CH₄O₂, Mo₂O₃, heatHCHO (methanal)
CH₃CH₃O₂, (CH₃COO)₂Mn, heatCH₃COOH (ethanoic acid)
(CH₃)₃CHKMnO₄ (oxidises the 3° C–H)(CH₃)₃COH (2-methylpropan-2-ol)
CH₃(CH₂)₄CH₃anhydrous AlCl₃ + HCl2-methylpentane + 3-methylpentane
CH₃(CH₂)₄CH₃Cr₂O₃/V₂O₅/Mo₂O₃ on Al₂O₃, 773 K, 10–20 atmC₆H₆ (benzene)
CH₄H₂O (steam), Ni, 1273 KCO + 3H₂
Higher alkanesheat, no air (cracking)smaller alkanes + alkenes

Worked example 1.7: How many moles of O₂ does 1 mol of propane need for complete combustion? What volume of CO₂ at STP comes from 2.2 g of propane?

Solution: For n = 3, O₂ needed = (3 × 3 + 1)/2 = 5 mol. Molar mass of C₃H₈ = 44 g/mol, so 2.2 g = 0.05 mol. CO₂ formed = 3 × 0.05 = 0.15 mol. Volume = 0.15 × 22.4 = 3.36 L.

Worked example 1.8: An alkyl bromide X gives 2,5-dimethylhexane by Wurtz reaction as the only product. Identify X.

Solution: 2,5-Dimethylhexane is (CH₃)₂CHCH₂–CH₂CH(CH₃)₂. Cut it at the central C–C bond. Each half is (CH₃)₂CHCH₂–, the isobutyl group. So X is (CH₃)₂CHCH₂Br, 1-bromo-2-methylpropane.

Quick revision

  • Alkanes CₙH₂ₙ₊₂, alkenes CₙH₂ₙ, alkynes CₙH₂ₙ₋₂. Cycloalkanes share CₙH₂ₙ with alkenes.

  • Chain isomers: C₄ has 2, C₅ has 3, C₆ has 5, C₇ has 9.

  • Wurtz (Na, dry ether) and Kolbe (electrolysis) both give R–R; neither can make methane.

  • Soda-lime decarboxylation gives R–H, one carbon fewer than the acid.

  • Kolbe: alkane and CO₂ at the anode, H₂ at the cathode, solution turns alkaline.

  • Boiling point rises with chain length and falls with branching. Neopentane boils lowest but melts highest among C₅H₁₂ isomers.

  • O₂ for complete combustion of CₙH₂ₙ₊₂ = (3n + 1)/2 mol per mol.

  • KMnO₄ converts a 3° C–H into C–OH; hexane aromatises to benzene at 773 K.

NEET traps

  • Students count the carbons of the acid, not of R, in decarboxylation. Sodium propanoate gives ethane, not propane.

  • In Kolbe, H₂ is not formed at the anode. The alkane and CO₂ are anode products.

  • Mixed Wurtz does not give only the cross product. It gives three alkanes.

  • Branching lowers boiling point, but do not extend this blindly to melting point. Symmetry raises melting point.

  • Ni needs 523–573 K for hydrogenation; Pt and Pd work at room temperature.

  • 2-Methylbutane is correct; "3-methylbutane" breaks the lowest-locant rule.

Practice MCQs: Chapter 1

Level 1: Concept check

1. The general formula of open-chain alkanes is (a) CₙH₂ₙ (b) CₙH₂ₙ₋₂ (c) CₙH₂ₙ₊₂ (d) CₙHₙ

2. The hybridisation of carbon in ethane and the H–C–H angle are (a) sp², 120° (b) sp³, about 109.5° (c) sp, 180° (d) sp³, 90°

3. Which alkane cannot be prepared by Wurtz reaction? (a) Ethane (b) Butane (c) Methane (d) Hexane

4. Sodium ethanoate heated with soda lime gives (a) methane (b) ethane (c) propane (d) ethene

5. The number of chain isomers of C₅H₁₂ is (a) 2 (b) 4 (c) 5 (d) 3

6. Soda lime is a mixture of (a) NaOH and CaO (b) Na₂CO₃ and CaO (c) NaOH and CaCO₃ (d) KOH and Ca(OH)₂

7. In Kolbe electrolysis of aqueous sodium ethanoate, the gas formed at the cathode is (a) ethane (b) CO₂ (c) O₂ (d) H₂

8. Which alkanes are gases at 298 K? (a) C₁ to C₄ (b) C₁ to C₆ (c) C₅ to C₁₇ (d) only CH₄

9. The IUPAC name of neopentane is (a) 2-methylbutane (b) 2,2-dimethylpropane (c) pentane (d) 2,2-dimethylbutane

10. In the Sabatier–Senderens method, alkenes are hydrogenated at 523–573 K using (a) Fe (b) V₂O₅ (c) Ni (d) Mo₂O₃

Level 2: NEET standard

11. A mixture of bromomethane and 1-bromopropane is treated with sodium in dry ether. The alkanes formed are (a) only butane (b) ethane, butane and hexane (c) ethane, propane and butane (d) only propane

12. Which salt gives butane on Kolbe electrolysis? (a) Sodium ethanoate (b) Sodium butanoate (c) Sodium propanoate (d) Sodium methanoate

13. The correct order of boiling points is (a) pentane > 2-methylbutane > 2,2-dimethylpropane (b) 2,2-dimethylpropane > 2-methylbutane > pentane (c) 2-methylbutane > pentane > 2,2-dimethylpropane (d) all three are equal

14. Moles of O₂ needed for complete combustion of 1 mol of butane are (a) 4 (b) 13 (c) 5 (d) 6.5

15. The volume of CO₂ at STP obtained by burning 1.45 g of butane completely is (a) 2.24 L (b) 1.12 L (c) 4.48 L (d) 0.56 L

16. 2-Methylpropane is oxidised by KMnO₄ to (a) 2-methylpropan-1-ol (b) butan-2-ol (c) 2-methylpropan-2-ol (d) propanone

17. Hexane heated at 773 K and 10–20 atm over Cr₂O₃ on alumina gives (a) cyclohexane (b) benzene (c) hex-1-ene (d) 2-methylpentane

18. Sodium 2-methylpropanoate, (CH₃)₂CHCOONa, is heated with soda lime. The product is (a) propane (b) butane (c) 2-methylpropane (d) propene

19. Which reagent converts iodoethane into ethane without changing the carbon count? (a) Alcoholic KOH (b) Na in dry ether (c) Aqueous KOH (d) Zn and dilute HCl

20. Which has the highest melting point? (a) Pentane (b) 2-Methylbutane (c) 2,2-Dimethylpropane (d) Butane

21. Methane and steam passed over nickel at about 1273 K give (a) CO₂ and H₂ (b) CO and H₂ (c) CH₃OH (d) HCHO

22. In 2,2,4-trimethylpentane, the numbers of 1°, 2°, 3° and 4° carbons are (a) 5, 1, 1, 1 (b) 4, 2, 1, 1 (c) 5, 2, 1, 0 (d) 6, 1, 0, 1

Level 3: Challenge

23. An alkyl bromide gives 3,4-dimethylhexane as the only product of Wurtz reaction. The bromide is (a) 1-bromobutane (b) 2-bromobutane (c) 1-bromo-2-methylpropane (d) 2-bromo-2-methylpropane

24. n-Butane is to be made by Kolbe electrolysis of salt P and by soda-lime decarboxylation of salt Q. P and Q are (a) sodium propanoate; sodium pentanoate (b) sodium butanoate; sodium pentanoate (c) sodium propanoate; sodium butanoate (d) sodium ethanoate; sodium propanoate

25. 0.1 mol of an alkane burns completely to give 8.96 L of CO₂ at STP. The alkane and the mass of water formed are (a) propane, 7.2 g (b) butane, 9.0 g (c) butane, 7.2 g (d) pentane, 10.8 g

26. The number of chain isomers of C₆H₁₄ is (a) 4 (b) 6 (c) 5 (d) 9

27. An alkane has vapour density 36. Its formula and number of chain isomers are (a) C₅H₁₂, 3 (b) C₅H₁₂, 2 (c) C₆H₁₄, 5 (d) C₄H₁₀, 2

28. Which statement about Kolbe electrolysis of aqueous sodium propanoate is wrong? (a) Butane forms at the anode (b) CO₂ forms at the anode (c) The solution becomes alkaline (d) H₂ forms at the anode

29. Assertion (A): 2,2-Dimethylpropane has a lower boiling point but a higher melting point than pentane. Reason (R): 2,2-Dimethylpropane is nearly spherical, so it has less surface contact in the liquid but packs well in the crystal. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Mixed Wurtz reaction is a good method to prepare pure alkanes with an odd number of carbon atoms. Statement II: Kolbe electrolysis of the sodium salt of a single monocarboxylic acid always gives an alkane with an even number of carbon atoms. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1cSaturated open chain: CₙH₂ₙ₊₂.
2bFour σ bonds, tetrahedral, sp³.
3cWurtz joins two R groups; smallest product is ethane.
4aCH₃COONa loses CO₂ as Na₂CO₃, leaving CH₄.
5dPentane, 2-methylbutane, 2,2-dimethylpropane.
6aSoda lime = NaOH + CaO.
7dWater is reduced at the cathode to H₂.
8aMethane to butane are gases.
9bThree-carbon chain with two methyls on C-2.
10cNi needs 523–573 K.
11bCH₃–CH₃, CH₃–C₃H₇, C₃H₇–C₃H₇.
12cR = C₂H₅; R–R = C₄H₁₀.
13aMore branching, smaller surface, lower bp.
14d(3 × 4 + 1)/2 = 6.5.
15a1.45/58 = 0.025 mol; × 4 = 0.1 mol CO₂ = 2.24 L.
16cThe 3° C–H becomes C–OH.
17bAromatisation: cyclise and lose 4 H₂.
18aR = (CH₃)₂CH; R–H is propane.
19dZn/HCl replaces X by H.
20cSymmetrical neopentane packs best (257 K).
21bSteam reforming: CH₄ + H₂O → CO + 3H₂.
22aFive CH₃, one CH₂, one CH, one quaternary C.
23bTwo sec-butyl groups joined give 3,4-dimethylhexane.
24aPropanoate: R = C₂H₅, R–R = C₄H₁₀; pentanoate: R = C₄H₉, R–H = C₄H₁₀.
25b0.4 mol CO₂ per 0.1 mol, n = 4; 0.5 mol H₂O = 9.0 g.
26cFive hexane isomers.
27aM = 72, C₅H₁₂, three isomers.
28dH₂ forms at the cathode.
29aShape explains both effects.
30dMixed Wurtz gives three products; R–R always has even carbons.

Chapter 1 revision sheet

One-page summary

  • Hydrocarbons contain only C and H: saturated (alkanes, single bonds only) or unsaturated (alkenes, alkynes, arenes).

  • General formulas: alkane CₙH₂ₙ₊₂, alkene and cycloalkane CₙH₂ₙ, alkyne CₙH₂ₙ₋₂.

  • Alkane carbons are sp³, tetrahedral, about 109.5°; C–C about 154 pm.

  • Each member of a homologous series differs by –CH₂– (14 u).

  • Chain isomers: C₄ = 2, C₅ = 3, C₆ = 5, C₇ = 9.

  • Carbon types: 1°, 2°, 3°, 4° by number of carbons attached; hydrogens take the type of their carbon.

  • Hydrogenation of alkenes/alkynes (Ni, Pt or Pd) gives alkanes.

  • Wurtz: 2RX + 2Na → R–R + 2NaX in dry ether; gives even-carbon symmetric alkanes; mixed halides give three products.

  • Decarboxylation: RCOONa + NaOH (CaO), heat → R–H + Na₂CO₃; one carbon fewer.

  • Kolbe: 2RCOONa + 2H₂O → R–R + 2CO₂ + H₂ + 2NaOH; alkane and CO₂ at anode, H₂ at cathode.

  • Neither Wurtz nor Kolbe can make methane.

  • Boiling point rises with chain length and falls with branching; neopentane melts highest among C₅H₁₂ isomers.

  • Alkanes are non-polar, insoluble in water, soluble in non-polar solvents.

  • Reactions: combustion, controlled oxidation, isomerisation (AlCl₃/HCl), aromatisation (773 K), steam reforming, pyrolysis.

CnH2n+2+3n+12O2→nCO2+(n+1)H2O\mathrm{C_nH_{2n+2} + \frac{3n+1}{2}O_2 \rightarrow nCO_2 + (n+1)H_2O}

Must-remember table

Method or reactionReagent and conditionsProduct
WurtzNa, dry etherR–R (2n carbons)
DecarboxylationNaOH + CaO, heatR–H (n − 1 carbons from the acid)
Kolbe electrolysisElectrolysis of conc. aqueous RCOONaR–R at anode
Reduction of RXZn + dil. HClR–H
Controlled oxidationCH₄ + O₂, Cu, 523 K, 100 atmCH₃OH
Controlled oxidationCH₄ + O₂, Mo₂O₃, heatHCHO
Oxidation of 3° C–HKMnO₄3° alcohol, e.g. (CH₃)₃COH
AromatisationCr₂O₃ or V₂O₅ on Al₂O₃, 773 K, 10–20 atmn-hexane → benzene
Steam reformingCH₄ + H₂O, Ni, 1273 KCO + 3H₂

Memory aids

  • "Wurtz Weds Twins": Wurtz joins two identical alkyl groups, so it makes symmetric, even-carbon alkanes best.

  • "Soda Snips One": Soda-lime snips one carbon off the acid (sodium ethanoate → methane).

  • "Kolbe: Anode Alkane, Cathode H₂" (AA-CH): A = anode, A = alkane plus CO₂; C = cathode, H = hydrogen.

  • "Branch Boils Below": more branching means lower boiling point.

  • "2-3-5-9": chain isomer counts for C₄, C₅, C₆, C₇.

Concept connections

  • Isomerism, 1°/2°/3° carbons and IUPAC rules come from Chemistry Book 14: Some Basic Principles of Organic Chemistry.

  • Haloalkanes used in Wurtz and reduction are studied fully in Chemistry Book 16: Organic Compounds Containing Halogens.

  • Combustion stoichiometry and enthalpy of combustion link to Chemistry Book 1: Some Basic Concepts in Chemistry and Chemistry Book 4: Chemical Thermodynamics.

Practice MCQs: Chapter 1, Level 4 (new NEET pattern)

31. Match List I (reaction) with List II (main organic product).

  • A. CH₃COONa heated with NaOH and CaO

  • B. CH₃Br with Na in dry ether

  • C. Electrolysis of concentrated aqueous CH₃CH₂COONa

  • D. CH₃CH₂CH₂Br with Zn and dilute HCl

  • (i) Ethane

  • (ii) Propane

  • (iii) Methane

  • (iv) Butane

(a) A-iii, B-i, C-iv, D-ii (b) A-i, B-iii, C-iv, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-ii, B-i, C-iv, D-iii

32. Match List I (molecular formula) with List II (number of chain isomers).

  • A. C₄H₁₀

  • B. C₅H₁₂

  • C. C₆H₁₄

  • D. C₇H₁₆

  • (i) 5

  • (ii) 9

  • (iii) 2

  • (iv) 3

(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-iv, C-i, D-ii

33. Match List I (alkane) with List II (feature).

  • A. 2,2-Dimethylpropane

  • B. n-Pentane

  • C. Methane

  • D. 2-Methylpropane

  • (i) Has exactly one 3° hydrogen

  • (ii) Highest boiling point among C₅H₁₂ isomers

  • (iii) Cannot be made by Wurtz reaction

  • (iv) Highest melting point among C₅H₁₂ isomers

(a) A-ii, B-iv, C-iii, D-i (b) A-iv, B-ii, C-i, D-iii (c) A-iv, B-ii, C-iii, D-i (d) A-iii, B-ii, C-iv, D-i

34. Match List I (reaction of an alkane) with List II (product).

  • A. n-Hexane over Cr₂O₃ on Al₂O₃ at 773 K, 10–20 atm

  • B. CH₄ + O₂ over Mo₂O₃, heat

  • C. (CH₃)₃CH with KMnO₄

  • D. n-Hexane with anhydrous AlCl₃ and HCl

  • (i) 2-Methylpentane

  • (ii) Benzene

  • (iii) Methanal

  • (iv) 2-Methylpropan-2-ol

(a) A-ii, B-iv, C-iii, D-i (b) A-ii, B-iii, C-iv, D-i (c) A-i, B-iii, C-iv, D-ii (d) A-ii, B-iii, C-i, D-iv

35. How many of the following statements are correct?

  • A. Kolbe electrolysis of sodium ethanoate gives ethane at the anode.

  • B. Heating sodium propanoate with soda lime gives propane.

  • C. Wurtz reaction gives alkanes with an odd number of carbons in good yield.

  • D. The solution becomes alkaline during Kolbe electrolysis.

(a) 1 (b) 2 (c) 3 (d) 4

36. Choose the correct set of statements.

  • A. n-Butane boils at a higher temperature than 2-methylpropane.

  • B. Among the C₅H₁₂ isomers, 2,2-dimethylpropane has the lowest boiling point.

  • C. Lower alkanes dissolve in water because they form hydrogen bonds.

  • D. Methane, ethane, propane and butane are gases at 298 K.

(a) A, B and D only (b) A and B only (c) A, C and D only (d) B and C only

37. How many of the following statements are correct?

  • A. C₆H₁₄ has five chain isomers.

  • B. All twelve hydrogens of 2,2-dimethylpropane are primary.

  • C. 2-Methylpropane has nine 1° hydrogens and one 3° hydrogen.

  • D. Cyclopentane and pent-1-yne are isomers.

(a) 2 (b) 4 (c) 3 (d) 1

38. Choose the correct set of statements.

  • A. One mole of pentane needs 8 mol of O₂ for complete combustion.

  • B. Methane and steam over nickel at about 1273 K give CO and H₂.

  • C. Alkanes decolourise cold, dilute alkaline KMnO₄.

  • D. Pyrolysis of higher alkanes gives a mixture of smaller alkanes and alkenes.

(a) A and C only (b) B, C and D only (c) A and D only (d) A, B and D only

39. A table gives the boiling points of straight-chain alkanes: CH₄ 112 K, C₂H₆ 185 K, C₃H₈ 231 K, C₄H₁₀ 273 K, C₅H₁₂ 309 K, C₆H₁₄ 342 K. Which conclusion is correct? (a) Boiling point rises because hydrogen bonding grows stronger with chain length (b) The rise in boiling point per added CH₂ gets larger as the chain grows (c) Boiling point rises because surface area and London forces increase, and the rise per CH₂ slowly gets smaller (d) Butane is a liquid at 298 K

40. Data for the three C₅H₁₂ isomers: n-pentane (mp 143 K, bp 309 K), 2-methylbutane (mp 113 K, bp 301 K), 2,2-dimethylpropane (mp 257 K, bp 283 K). Which isomer is liquid over the narrowest temperature range, and why? (a) n-Pentane, because it has the largest surface area (b) 2,2-Dimethylpropane, because its compact, near-spherical shape packs well in the solid but gives a small surface area for London forces (c) 2-Methylbutane, because it has one 3° hydrogen (d) 2,2-Dimethylpropane, because it forms hydrogen bonds in the solid

41. 1.44 g of an alkane burns completely to give 4.40 g of CO₂ and 2.16 g of H₂O. The alkane is (a) C₄H₁₀ (b) C₆H₁₄ (c) C₅H₁₀ (d) C₅H₁₂

Passage for Q42–43: A student wants to make pentane for a solvent test. She mixes equal moles of bromoethane and 1-bromopropane and adds sodium metal in dry ether. After the reaction she finds more than one alkane in the flask.

42. How many alkanes are formed? (a) 2 (b) 3 (c) 4 (d) 1

43. Which alkane in the mixture has the highest boiling point? (a) Hexane (b) Butane (c) Pentane (d) All three boil at the same temperature

44. An alkyl bromide X (C₃H₇Br) gives 2,3-dimethylbutane with sodium in dry ether. X is (a) 1-Bromopropane (b) 1-Bromobutane (c) 2-Bromopropane (d) 2-Bromo-2-methylpropane

45. The sodium salt of a carboxylic acid Y gives propane when heated with soda lime. Kolbe electrolysis of the same salt gives (a) Propane (b) Butane (c) Pentane (d) Hexane

Level 4 answer key

QAnsReason
31aDecarboxylation gives CH₄; Wurtz of CH₃Br gives ethane; Kolbe of propanoate gives butane; Zn/HCl reduces to propane
32dC₄ = 2, C₅ = 3, C₆ = 5, C₇ = 9
33cNeopentane highest mp; n-pentane highest bp; methane needs one carbon; isobutane has one 3° H
34bAromatisation → benzene; Mo₂O₃ → HCHO; KMnO₄ attacks 3° C–H; AlCl₃/HCl isomerises
35bA and D true; propanoate gives ethane; Wurtz suits even-carbon alkanes
36aC is false: alkanes cannot hydrogen bond with water
37cA, B, C true; cyclopentane is C₅H₁₀, pent-1-yne is C₅H₈
38d(3 × 5 + 1)/2 = 8; alkanes do not react with Baeyer's reagent
39cDifferences 73, 46, 42, 36, 33 K shrink; 273 K is below 298 K so butane is a gas
40bLiquid range: 166 K, 188 K and 26 K; neopentane is shortest
41dCO₂ 0.1 mol C; H₂O 0.12 mol → 0.24 mol H; C:H = 5:12
42bButane, pentane and hexane form
43aHexane has the longest chain
44cTwo isopropyl groups joined give (CH₃)₂CH–CH(CH₃)₂
45dY is sodium butanoate; Kolbe joins two propyl groups → hexane
23 min left
‹
›